android_kernel_motorola_sm6225/drivers/net/wireless/rt2x00/rt2x00config.c
Ivo van Doorn 5c58ee51ff [PATCH] rt2x00: Reorganize configuration handler
Reorganize configuration handling by creating a extra
structure which contains precalculated values based
on the mac80211 values which are usefull for all
individual drivers.

This also fixes the preamble configuration problem,
up untill now preamble was never configured since
by default the rate->val value was used when changing
the mode.
Now rate->val will only be used to set the basic rate mask.
The preamble configuration will now be done correctly
through the erp_ie_changed callback function.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:15 -07:00

205 lines
5.5 KiB
C

/*
Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2x00lib
Abstract: rt2x00 generic configuration routines.
*/
/*
* Set enviroment defines for rt2x00.h
*/
#define DRV_NAME "rt2x00lib"
#include <linux/kernel.h>
#include <linux/module.h>
#include "rt2x00.h"
#include "rt2x00lib.h"
/*
* The MAC and BSSID addressess are simple array of bytes,
* these arrays are little endian, so when sending the addressess
* to the drivers, copy the it into a endian-signed variable.
*
* Note that all devices (except rt2500usb) have 32 bits
* register word sizes. This means that whatever variable we
* pass _must_ be a multiple of 32 bits. Otherwise the device
* might not accept what we are sending to it.
* This will also make it easier for the driver to write
* the data to the device.
*
* Also note that when NULL is passed as address the
* we will send 00:00:00:00:00 to the device to clear the address.
* This will prevent the device being confused when it wants
* to ACK frames or consideres itself associated.
*/
void rt2x00lib_config_mac_addr(struct rt2x00_dev *rt2x00dev, u8 *mac)
{
__le32 reg[2];
memset(&reg, 0, sizeof(reg));
if (mac)
memcpy(&reg, mac, ETH_ALEN);
rt2x00dev->ops->lib->config_mac_addr(rt2x00dev, &reg[0]);
}
void rt2x00lib_config_bssid(struct rt2x00_dev *rt2x00dev, u8 *bssid)
{
__le32 reg[2];
memset(&reg, 0, sizeof(reg));
if (bssid)
memcpy(&reg, bssid, ETH_ALEN);
rt2x00dev->ops->lib->config_bssid(rt2x00dev, &reg[0]);
}
void rt2x00lib_config_type(struct rt2x00_dev *rt2x00dev, const int type)
{
int tsf_sync;
switch (type) {
case IEEE80211_IF_TYPE_IBSS:
case IEEE80211_IF_TYPE_AP:
tsf_sync = TSF_SYNC_BEACON;
break;
case IEEE80211_IF_TYPE_STA:
tsf_sync = TSF_SYNC_INFRA;
break;
default:
tsf_sync = TSF_SYNC_NONE;
break;
}
rt2x00dev->ops->lib->config_type(rt2x00dev, type, tsf_sync);
}
void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf, const int force_config)
{
struct rt2x00lib_conf libconf;
struct ieee80211_hw_mode *mode;
struct ieee80211_rate *rate;
int flags = 0;
int short_slot_time;
/*
* In some situations we want to force all configurations
* to be reloaded (When resuming for instance).
*/
if (force_config) {
flags = CONFIG_UPDATE_ALL;
goto config;
}
/*
* Check which configuration options have been
* updated and should be send to the device.
*/
if (rt2x00dev->rx_status.phymode != conf->phymode)
flags |= CONFIG_UPDATE_PHYMODE;
if (rt2x00dev->rx_status.channel != conf->channel)
flags |= CONFIG_UPDATE_CHANNEL;
if (rt2x00dev->tx_power != conf->power_level)
flags |= CONFIG_UPDATE_TXPOWER;
if (rt2x00dev->rx_status.antenna == conf->antenna_sel_rx)
flags |= CONFIG_UPDATE_ANTENNA;
/*
* The following configuration options are never
* stored anywhere and will always be updated.
*/
flags |= CONFIG_UPDATE_SLOT_TIME;
flags |= CONFIG_UPDATE_BEACON_INT;
/*
* We have determined what options should be updated,
* now precalculate device configuration values depending
* on what configuration options need to be updated.
*/
config:
memset(&libconf, 0, sizeof(libconf));
if (flags & CONFIG_UPDATE_PHYMODE) {
switch (conf->phymode) {
case MODE_IEEE80211A:
libconf.phymode = HWMODE_A;
break;
case MODE_IEEE80211B:
libconf.phymode = HWMODE_B;
break;
case MODE_IEEE80211G:
libconf.phymode = HWMODE_G;
break;
default:
ERROR(rt2x00dev,
"Attempt to configure unsupported mode (%d)"
"Defaulting to 802.11b", conf->phymode);
libconf.phymode = HWMODE_B;
}
mode = &rt2x00dev->hwmodes[libconf.phymode];
rate = &mode->rates[mode->num_rates - 1];
libconf.basic_rates =
DEVICE_GET_RATE_FIELD(rate->val, RATEMASK) & DEV_BASIC_RATEMASK;
}
if (flags & CONFIG_UPDATE_CHANNEL) {
memcpy(&libconf.rf,
&rt2x00dev->spec.channels[conf->channel_val],
sizeof(libconf.rf));
}
if (flags & CONFIG_UPDATE_SLOT_TIME) {
short_slot_time = conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME;
libconf.slot_time =
short_slot_time ? SHORT_SLOT_TIME : SLOT_TIME;
libconf.sifs = SIFS;
libconf.pifs = short_slot_time ? SHORT_PIFS : PIFS;
libconf.difs = short_slot_time ? SHORT_DIFS : DIFS;
libconf.eifs = EIFS;
}
libconf.conf = conf;
/*
* Start configuration.
*/
rt2x00dev->ops->lib->config(rt2x00dev, flags, &libconf);
/*
* Some configuration changes affect the link quality
* which means we need to reset the link tuner.
*/
if (flags & (CONFIG_UPDATE_CHANNEL | CONFIG_UPDATE_ANTENNA))
rt2x00lib_reset_link_tuner(rt2x00dev);
rt2x00dev->curr_hwmode = libconf.phymode;
rt2x00dev->rx_status.phymode = conf->phymode;
rt2x00dev->rx_status.freq = conf->freq;
rt2x00dev->rx_status.channel = conf->channel;
rt2x00dev->tx_power = conf->power_level;
rt2x00dev->rx_status.antenna = conf->antenna_sel_rx;
}