3663b736a5
Update all avr32-specific files to use the new platform-specific header locations. Drivers shared with ARM are left alone for now. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
1171 lines
27 KiB
C
1171 lines
27 KiB
C
/*
|
|
* Atmel MultiMedia Card Interface driver
|
|
*
|
|
* Copyright (C) 2004-2008 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/blkdev.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/stat.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
|
|
#include <asm/atmel-mci.h>
|
|
#include <asm/io.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <mach/board.h>
|
|
|
|
#include "atmel-mci-regs.h"
|
|
|
|
#define ATMCI_DATA_ERROR_FLAGS (MCI_DCRCE | MCI_DTOE | MCI_OVRE | MCI_UNRE)
|
|
|
|
enum {
|
|
EVENT_CMD_COMPLETE = 0,
|
|
EVENT_DATA_ERROR,
|
|
EVENT_DATA_COMPLETE,
|
|
EVENT_STOP_SENT,
|
|
EVENT_STOP_COMPLETE,
|
|
EVENT_XFER_COMPLETE,
|
|
};
|
|
|
|
struct atmel_mci {
|
|
struct mmc_host *mmc;
|
|
void __iomem *regs;
|
|
|
|
struct scatterlist *sg;
|
|
unsigned int pio_offset;
|
|
|
|
struct mmc_request *mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_data *data;
|
|
|
|
u32 cmd_status;
|
|
u32 data_status;
|
|
u32 stop_status;
|
|
u32 stop_cmdr;
|
|
|
|
u32 mode_reg;
|
|
u32 sdc_reg;
|
|
|
|
struct tasklet_struct tasklet;
|
|
unsigned long pending_events;
|
|
unsigned long completed_events;
|
|
|
|
int present;
|
|
int detect_pin;
|
|
int wp_pin;
|
|
|
|
/* For detect pin debouncing */
|
|
struct timer_list detect_timer;
|
|
|
|
unsigned long bus_hz;
|
|
unsigned long mapbase;
|
|
struct clk *mck;
|
|
struct platform_device *pdev;
|
|
};
|
|
|
|
#define atmci_is_completed(host, event) \
|
|
test_bit(event, &host->completed_events)
|
|
#define atmci_test_and_clear_pending(host, event) \
|
|
test_and_clear_bit(event, &host->pending_events)
|
|
#define atmci_test_and_set_completed(host, event) \
|
|
test_and_set_bit(event, &host->completed_events)
|
|
#define atmci_set_completed(host, event) \
|
|
set_bit(event, &host->completed_events)
|
|
#define atmci_set_pending(host, event) \
|
|
set_bit(event, &host->pending_events)
|
|
#define atmci_clear_pending(host, event) \
|
|
clear_bit(event, &host->pending_events)
|
|
|
|
/*
|
|
* The debugfs stuff below is mostly optimized away when
|
|
* CONFIG_DEBUG_FS is not set.
|
|
*/
|
|
static int atmci_req_show(struct seq_file *s, void *v)
|
|
{
|
|
struct atmel_mci *host = s->private;
|
|
struct mmc_request *mrq = host->mrq;
|
|
struct mmc_command *cmd;
|
|
struct mmc_command *stop;
|
|
struct mmc_data *data;
|
|
|
|
/* Make sure we get a consistent snapshot */
|
|
spin_lock_irq(&host->mmc->lock);
|
|
|
|
if (mrq) {
|
|
cmd = mrq->cmd;
|
|
data = mrq->data;
|
|
stop = mrq->stop;
|
|
|
|
if (cmd)
|
|
seq_printf(s,
|
|
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
|
|
cmd->opcode, cmd->arg, cmd->flags,
|
|
cmd->resp[0], cmd->resp[1], cmd->resp[2],
|
|
cmd->resp[2], cmd->error);
|
|
if (data)
|
|
seq_printf(s, "DATA %u / %u * %u flg %x err %d\n",
|
|
data->bytes_xfered, data->blocks,
|
|
data->blksz, data->flags, data->error);
|
|
if (stop)
|
|
seq_printf(s,
|
|
"CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n",
|
|
stop->opcode, stop->arg, stop->flags,
|
|
stop->resp[0], stop->resp[1], stop->resp[2],
|
|
stop->resp[2], stop->error);
|
|
}
|
|
|
|
spin_unlock_irq(&host->mmc->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmci_req_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, atmci_req_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations atmci_req_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = atmci_req_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void atmci_show_status_reg(struct seq_file *s,
|
|
const char *regname, u32 value)
|
|
{
|
|
static const char *sr_bit[] = {
|
|
[0] = "CMDRDY",
|
|
[1] = "RXRDY",
|
|
[2] = "TXRDY",
|
|
[3] = "BLKE",
|
|
[4] = "DTIP",
|
|
[5] = "NOTBUSY",
|
|
[8] = "SDIOIRQA",
|
|
[9] = "SDIOIRQB",
|
|
[16] = "RINDE",
|
|
[17] = "RDIRE",
|
|
[18] = "RCRCE",
|
|
[19] = "RENDE",
|
|
[20] = "RTOE",
|
|
[21] = "DCRCE",
|
|
[22] = "DTOE",
|
|
[30] = "OVRE",
|
|
[31] = "UNRE",
|
|
};
|
|
unsigned int i;
|
|
|
|
seq_printf(s, "%s:\t0x%08x", regname, value);
|
|
for (i = 0; i < ARRAY_SIZE(sr_bit); i++) {
|
|
if (value & (1 << i)) {
|
|
if (sr_bit[i])
|
|
seq_printf(s, " %s", sr_bit[i]);
|
|
else
|
|
seq_puts(s, " UNKNOWN");
|
|
}
|
|
}
|
|
seq_putc(s, '\n');
|
|
}
|
|
|
|
static int atmci_regs_show(struct seq_file *s, void *v)
|
|
{
|
|
struct atmel_mci *host = s->private;
|
|
u32 *buf;
|
|
|
|
buf = kmalloc(MCI_REGS_SIZE, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
/* Grab a more or less consistent snapshot */
|
|
spin_lock_irq(&host->mmc->lock);
|
|
memcpy_fromio(buf, host->regs, MCI_REGS_SIZE);
|
|
spin_unlock_irq(&host->mmc->lock);
|
|
|
|
seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n",
|
|
buf[MCI_MR / 4],
|
|
buf[MCI_MR / 4] & MCI_MR_RDPROOF ? " RDPROOF" : "",
|
|
buf[MCI_MR / 4] & MCI_MR_WRPROOF ? " WRPROOF" : "",
|
|
buf[MCI_MR / 4] & 0xff);
|
|
seq_printf(s, "DTOR:\t0x%08x\n", buf[MCI_DTOR / 4]);
|
|
seq_printf(s, "SDCR:\t0x%08x\n", buf[MCI_SDCR / 4]);
|
|
seq_printf(s, "ARGR:\t0x%08x\n", buf[MCI_ARGR / 4]);
|
|
seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n",
|
|
buf[MCI_BLKR / 4],
|
|
buf[MCI_BLKR / 4] & 0xffff,
|
|
(buf[MCI_BLKR / 4] >> 16) & 0xffff);
|
|
|
|
/* Don't read RSPR and RDR; it will consume the data there */
|
|
|
|
atmci_show_status_reg(s, "SR", buf[MCI_SR / 4]);
|
|
atmci_show_status_reg(s, "IMR", buf[MCI_IMR / 4]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmci_regs_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, atmci_regs_show, inode->i_private);
|
|
}
|
|
|
|
static const struct file_operations atmci_regs_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = atmci_regs_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static void atmci_init_debugfs(struct atmel_mci *host)
|
|
{
|
|
struct mmc_host *mmc;
|
|
struct dentry *root;
|
|
struct dentry *node;
|
|
struct resource *res;
|
|
|
|
mmc = host->mmc;
|
|
root = mmc->debugfs_root;
|
|
if (!root)
|
|
return;
|
|
|
|
node = debugfs_create_file("regs", S_IRUSR, root, host,
|
|
&atmci_regs_fops);
|
|
if (IS_ERR(node))
|
|
return;
|
|
if (!node)
|
|
goto err;
|
|
|
|
res = platform_get_resource(host->pdev, IORESOURCE_MEM, 0);
|
|
node->d_inode->i_size = res->end - res->start + 1;
|
|
|
|
node = debugfs_create_file("req", S_IRUSR, root, host, &atmci_req_fops);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_x32("pending_events", S_IRUSR, root,
|
|
(u32 *)&host->pending_events);
|
|
if (!node)
|
|
goto err;
|
|
|
|
node = debugfs_create_x32("completed_events", S_IRUSR, root,
|
|
(u32 *)&host->completed_events);
|
|
if (!node)
|
|
goto err;
|
|
|
|
return;
|
|
|
|
err:
|
|
dev_err(&host->pdev->dev,
|
|
"failed to initialize debugfs for controller\n");
|
|
}
|
|
|
|
static void atmci_enable(struct atmel_mci *host)
|
|
{
|
|
clk_enable(host->mck);
|
|
mci_writel(host, CR, MCI_CR_MCIEN);
|
|
mci_writel(host, MR, host->mode_reg);
|
|
mci_writel(host, SDCR, host->sdc_reg);
|
|
}
|
|
|
|
static void atmci_disable(struct atmel_mci *host)
|
|
{
|
|
mci_writel(host, CR, MCI_CR_SWRST);
|
|
|
|
/* Stall until write is complete, then disable the bus clock */
|
|
mci_readl(host, SR);
|
|
clk_disable(host->mck);
|
|
}
|
|
|
|
static inline unsigned int ns_to_clocks(struct atmel_mci *host,
|
|
unsigned int ns)
|
|
{
|
|
return (ns * (host->bus_hz / 1000000) + 999) / 1000;
|
|
}
|
|
|
|
static void atmci_set_timeout(struct atmel_mci *host,
|
|
struct mmc_data *data)
|
|
{
|
|
static unsigned dtomul_to_shift[] = {
|
|
0, 4, 7, 8, 10, 12, 16, 20
|
|
};
|
|
unsigned timeout;
|
|
unsigned dtocyc;
|
|
unsigned dtomul;
|
|
|
|
timeout = ns_to_clocks(host, data->timeout_ns) + data->timeout_clks;
|
|
|
|
for (dtomul = 0; dtomul < 8; dtomul++) {
|
|
unsigned shift = dtomul_to_shift[dtomul];
|
|
dtocyc = (timeout + (1 << shift) - 1) >> shift;
|
|
if (dtocyc < 15)
|
|
break;
|
|
}
|
|
|
|
if (dtomul >= 8) {
|
|
dtomul = 7;
|
|
dtocyc = 15;
|
|
}
|
|
|
|
dev_vdbg(&host->mmc->class_dev, "setting timeout to %u cycles\n",
|
|
dtocyc << dtomul_to_shift[dtomul]);
|
|
mci_writel(host, DTOR, (MCI_DTOMUL(dtomul) | MCI_DTOCYC(dtocyc)));
|
|
}
|
|
|
|
/*
|
|
* Return mask with command flags to be enabled for this command.
|
|
*/
|
|
static u32 atmci_prepare_command(struct mmc_host *mmc,
|
|
struct mmc_command *cmd)
|
|
{
|
|
struct mmc_data *data;
|
|
u32 cmdr;
|
|
|
|
cmd->error = -EINPROGRESS;
|
|
|
|
cmdr = MCI_CMDR_CMDNB(cmd->opcode);
|
|
|
|
if (cmd->flags & MMC_RSP_PRESENT) {
|
|
if (cmd->flags & MMC_RSP_136)
|
|
cmdr |= MCI_CMDR_RSPTYP_136BIT;
|
|
else
|
|
cmdr |= MCI_CMDR_RSPTYP_48BIT;
|
|
}
|
|
|
|
/*
|
|
* This should really be MAXLAT_5 for CMD2 and ACMD41, but
|
|
* it's too difficult to determine whether this is an ACMD or
|
|
* not. Better make it 64.
|
|
*/
|
|
cmdr |= MCI_CMDR_MAXLAT_64CYC;
|
|
|
|
if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN)
|
|
cmdr |= MCI_CMDR_OPDCMD;
|
|
|
|
data = cmd->data;
|
|
if (data) {
|
|
cmdr |= MCI_CMDR_START_XFER;
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
cmdr |= MCI_CMDR_STREAM;
|
|
else if (data->blocks > 1)
|
|
cmdr |= MCI_CMDR_MULTI_BLOCK;
|
|
else
|
|
cmdr |= MCI_CMDR_BLOCK;
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
cmdr |= MCI_CMDR_TRDIR_READ;
|
|
}
|
|
|
|
return cmdr;
|
|
}
|
|
|
|
static void atmci_start_command(struct atmel_mci *host,
|
|
struct mmc_command *cmd,
|
|
u32 cmd_flags)
|
|
{
|
|
/* Must read host->cmd after testing event flags */
|
|
smp_rmb();
|
|
WARN_ON(host->cmd);
|
|
host->cmd = cmd;
|
|
|
|
dev_vdbg(&host->mmc->class_dev,
|
|
"start command: ARGR=0x%08x CMDR=0x%08x\n",
|
|
cmd->arg, cmd_flags);
|
|
|
|
mci_writel(host, ARGR, cmd->arg);
|
|
mci_writel(host, CMDR, cmd_flags);
|
|
}
|
|
|
|
static void send_stop_cmd(struct mmc_host *mmc, struct mmc_data *data)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
atmci_start_command(host, data->stop, host->stop_cmdr);
|
|
mci_writel(host, IER, MCI_CMDRDY);
|
|
}
|
|
|
|
static void atmci_request_end(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
WARN_ON(host->cmd || host->data);
|
|
host->mrq = NULL;
|
|
|
|
atmci_disable(host);
|
|
|
|
mmc_request_done(mmc, mrq);
|
|
}
|
|
|
|
/*
|
|
* Returns a mask of interrupt flags to be enabled after the whole
|
|
* request has been prepared.
|
|
*/
|
|
static u32 atmci_submit_data(struct mmc_host *mmc, struct mmc_data *data)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
u32 iflags;
|
|
|
|
data->error = -EINPROGRESS;
|
|
|
|
WARN_ON(host->data);
|
|
host->sg = NULL;
|
|
host->data = data;
|
|
|
|
mci_writel(host, BLKR, MCI_BCNT(data->blocks)
|
|
| MCI_BLKLEN(data->blksz));
|
|
dev_vdbg(&mmc->class_dev, "BLKR=0x%08x\n",
|
|
MCI_BCNT(data->blocks) | MCI_BLKLEN(data->blksz));
|
|
|
|
iflags = ATMCI_DATA_ERROR_FLAGS;
|
|
host->sg = data->sg;
|
|
host->pio_offset = 0;
|
|
if (data->flags & MMC_DATA_READ)
|
|
iflags |= MCI_RXRDY;
|
|
else
|
|
iflags |= MCI_TXRDY;
|
|
|
|
return iflags;
|
|
}
|
|
|
|
static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
struct mmc_data *data;
|
|
struct mmc_command *cmd;
|
|
u32 iflags;
|
|
u32 cmdflags = 0;
|
|
|
|
iflags = mci_readl(host, IMR);
|
|
if (iflags)
|
|
dev_warn(&mmc->class_dev, "WARNING: IMR=0x%08x\n",
|
|
mci_readl(host, IMR));
|
|
|
|
WARN_ON(host->mrq != NULL);
|
|
|
|
/*
|
|
* We may "know" the card is gone even though there's still an
|
|
* electrical connection. If so, we really need to communicate
|
|
* this to the MMC core since there won't be any more
|
|
* interrupts as the card is completely removed. Otherwise,
|
|
* the MMC core might believe the card is still there even
|
|
* though the card was just removed very slowly.
|
|
*/
|
|
if (!host->present) {
|
|
mrq->cmd->error = -ENOMEDIUM;
|
|
mmc_request_done(mmc, mrq);
|
|
return;
|
|
}
|
|
|
|
host->mrq = mrq;
|
|
host->pending_events = 0;
|
|
host->completed_events = 0;
|
|
|
|
atmci_enable(host);
|
|
|
|
/* We don't support multiple blocks of weird lengths. */
|
|
data = mrq->data;
|
|
if (data) {
|
|
if (data->blocks > 1 && data->blksz & 3)
|
|
goto fail;
|
|
atmci_set_timeout(host, data);
|
|
}
|
|
|
|
iflags = MCI_CMDRDY;
|
|
cmd = mrq->cmd;
|
|
cmdflags = atmci_prepare_command(mmc, cmd);
|
|
atmci_start_command(host, cmd, cmdflags);
|
|
|
|
if (data)
|
|
iflags |= atmci_submit_data(mmc, data);
|
|
|
|
if (mrq->stop) {
|
|
host->stop_cmdr = atmci_prepare_command(mmc, mrq->stop);
|
|
host->stop_cmdr |= MCI_CMDR_STOP_XFER;
|
|
if (!(data->flags & MMC_DATA_WRITE))
|
|
host->stop_cmdr |= MCI_CMDR_TRDIR_READ;
|
|
if (data->flags & MMC_DATA_STREAM)
|
|
host->stop_cmdr |= MCI_CMDR_STREAM;
|
|
else
|
|
host->stop_cmdr |= MCI_CMDR_MULTI_BLOCK;
|
|
}
|
|
|
|
/*
|
|
* We could have enabled interrupts earlier, but I suspect
|
|
* that would open up a nice can of interesting race
|
|
* conditions (e.g. command and data complete, but stop not
|
|
* prepared yet.)
|
|
*/
|
|
mci_writel(host, IER, iflags);
|
|
|
|
return;
|
|
|
|
fail:
|
|
atmci_disable(host);
|
|
host->mrq = NULL;
|
|
mrq->cmd->error = -EINVAL;
|
|
mmc_request_done(mmc, mrq);
|
|
}
|
|
|
|
static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
if (ios->clock) {
|
|
u32 clkdiv;
|
|
|
|
/* Set clock rate */
|
|
clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * ios->clock) - 1;
|
|
if (clkdiv > 255) {
|
|
dev_warn(&mmc->class_dev,
|
|
"clock %u too slow; using %lu\n",
|
|
ios->clock, host->bus_hz / (2 * 256));
|
|
clkdiv = 255;
|
|
}
|
|
|
|
host->mode_reg = MCI_MR_CLKDIV(clkdiv) | MCI_MR_WRPROOF
|
|
| MCI_MR_RDPROOF;
|
|
}
|
|
|
|
switch (ios->bus_width) {
|
|
case MMC_BUS_WIDTH_1:
|
|
host->sdc_reg = 0;
|
|
break;
|
|
case MMC_BUS_WIDTH_4:
|
|
host->sdc_reg = MCI_SDCBUS_4BIT;
|
|
break;
|
|
}
|
|
|
|
switch (ios->power_mode) {
|
|
case MMC_POWER_ON:
|
|
/* Send init sequence (74 clock cycles) */
|
|
atmci_enable(host);
|
|
mci_writel(host, CMDR, MCI_CMDR_SPCMD_INIT);
|
|
while (!(mci_readl(host, SR) & MCI_CMDRDY))
|
|
cpu_relax();
|
|
atmci_disable(host);
|
|
break;
|
|
default:
|
|
/*
|
|
* TODO: None of the currently available AVR32-based
|
|
* boards allow MMC power to be turned off. Implement
|
|
* power control when this can be tested properly.
|
|
*/
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int atmci_get_ro(struct mmc_host *mmc)
|
|
{
|
|
int read_only = 0;
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
if (gpio_is_valid(host->wp_pin)) {
|
|
read_only = gpio_get_value(host->wp_pin);
|
|
dev_dbg(&mmc->class_dev, "card is %s\n",
|
|
read_only ? "read-only" : "read-write");
|
|
} else {
|
|
dev_dbg(&mmc->class_dev,
|
|
"no pin for checking read-only switch."
|
|
" Assuming write-enable.\n");
|
|
}
|
|
|
|
return read_only;
|
|
}
|
|
|
|
static struct mmc_host_ops atmci_ops = {
|
|
.request = atmci_request,
|
|
.set_ios = atmci_set_ios,
|
|
.get_ro = atmci_get_ro,
|
|
};
|
|
|
|
static void atmci_command_complete(struct atmel_mci *host,
|
|
struct mmc_command *cmd, u32 status)
|
|
{
|
|
/* Read the response from the card (up to 16 bytes) */
|
|
cmd->resp[0] = mci_readl(host, RSPR);
|
|
cmd->resp[1] = mci_readl(host, RSPR);
|
|
cmd->resp[2] = mci_readl(host, RSPR);
|
|
cmd->resp[3] = mci_readl(host, RSPR);
|
|
|
|
if (status & MCI_RTOE)
|
|
cmd->error = -ETIMEDOUT;
|
|
else if ((cmd->flags & MMC_RSP_CRC) && (status & MCI_RCRCE))
|
|
cmd->error = -EILSEQ;
|
|
else if (status & (MCI_RINDE | MCI_RDIRE | MCI_RENDE))
|
|
cmd->error = -EIO;
|
|
else
|
|
cmd->error = 0;
|
|
|
|
if (cmd->error) {
|
|
dev_dbg(&host->mmc->class_dev,
|
|
"command error: status=0x%08x\n", status);
|
|
|
|
if (cmd->data) {
|
|
host->data = NULL;
|
|
mci_writel(host, IDR, MCI_NOTBUSY
|
|
| MCI_TXRDY | MCI_RXRDY
|
|
| ATMCI_DATA_ERROR_FLAGS);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void atmci_detect_change(unsigned long data)
|
|
{
|
|
struct atmel_mci *host = (struct atmel_mci *)data;
|
|
struct mmc_request *mrq = host->mrq;
|
|
int present;
|
|
|
|
/*
|
|
* atmci_remove() sets detect_pin to -1 before freeing the
|
|
* interrupt. We must not re-enable the interrupt if it has
|
|
* been freed.
|
|
*/
|
|
smp_rmb();
|
|
if (!gpio_is_valid(host->detect_pin))
|
|
return;
|
|
|
|
enable_irq(gpio_to_irq(host->detect_pin));
|
|
present = !gpio_get_value(host->detect_pin);
|
|
|
|
dev_vdbg(&host->pdev->dev, "detect change: %d (was %d)\n",
|
|
present, host->present);
|
|
|
|
if (present != host->present) {
|
|
dev_dbg(&host->mmc->class_dev, "card %s\n",
|
|
present ? "inserted" : "removed");
|
|
host->present = present;
|
|
|
|
/* Reset controller if card is gone */
|
|
if (!present) {
|
|
mci_writel(host, CR, MCI_CR_SWRST);
|
|
mci_writel(host, IDR, ~0UL);
|
|
mci_writel(host, CR, MCI_CR_MCIEN);
|
|
}
|
|
|
|
/* Clean up queue if present */
|
|
if (mrq) {
|
|
/*
|
|
* Reset controller to terminate any ongoing
|
|
* commands or data transfers.
|
|
*/
|
|
mci_writel(host, CR, MCI_CR_SWRST);
|
|
|
|
if (!atmci_is_completed(host, EVENT_CMD_COMPLETE))
|
|
mrq->cmd->error = -ENOMEDIUM;
|
|
|
|
if (mrq->data && !atmci_is_completed(host,
|
|
EVENT_DATA_COMPLETE)) {
|
|
host->data = NULL;
|
|
mrq->data->error = -ENOMEDIUM;
|
|
}
|
|
if (mrq->stop && !atmci_is_completed(host,
|
|
EVENT_STOP_COMPLETE))
|
|
mrq->stop->error = -ENOMEDIUM;
|
|
|
|
host->cmd = NULL;
|
|
atmci_request_end(host->mmc, mrq);
|
|
}
|
|
|
|
mmc_detect_change(host->mmc, 0);
|
|
}
|
|
}
|
|
|
|
static void atmci_tasklet_func(unsigned long priv)
|
|
{
|
|
struct mmc_host *mmc = (struct mmc_host *)priv;
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
struct mmc_request *mrq = host->mrq;
|
|
struct mmc_data *data = host->data;
|
|
|
|
dev_vdbg(&mmc->class_dev,
|
|
"tasklet: pending/completed/mask %lx/%lx/%x\n",
|
|
host->pending_events, host->completed_events,
|
|
mci_readl(host, IMR));
|
|
|
|
if (atmci_test_and_clear_pending(host, EVENT_CMD_COMPLETE)) {
|
|
/*
|
|
* host->cmd must be set to NULL before the interrupt
|
|
* handler sees EVENT_CMD_COMPLETE
|
|
*/
|
|
host->cmd = NULL;
|
|
smp_wmb();
|
|
atmci_set_completed(host, EVENT_CMD_COMPLETE);
|
|
atmci_command_complete(host, mrq->cmd, host->cmd_status);
|
|
|
|
if (!mrq->cmd->error && mrq->stop
|
|
&& atmci_is_completed(host, EVENT_XFER_COMPLETE)
|
|
&& !atmci_test_and_set_completed(host,
|
|
EVENT_STOP_SENT))
|
|
send_stop_cmd(host->mmc, mrq->data);
|
|
}
|
|
if (atmci_test_and_clear_pending(host, EVENT_STOP_COMPLETE)) {
|
|
/*
|
|
* host->cmd must be set to NULL before the interrupt
|
|
* handler sees EVENT_STOP_COMPLETE
|
|
*/
|
|
host->cmd = NULL;
|
|
smp_wmb();
|
|
atmci_set_completed(host, EVENT_STOP_COMPLETE);
|
|
atmci_command_complete(host, mrq->stop, host->stop_status);
|
|
}
|
|
if (atmci_test_and_clear_pending(host, EVENT_DATA_ERROR)) {
|
|
u32 status = host->data_status;
|
|
|
|
dev_vdbg(&mmc->class_dev, "data error: status=%08x\n", status);
|
|
|
|
atmci_set_completed(host, EVENT_DATA_ERROR);
|
|
atmci_set_completed(host, EVENT_DATA_COMPLETE);
|
|
|
|
if (status & MCI_DTOE) {
|
|
dev_dbg(&mmc->class_dev,
|
|
"data timeout error\n");
|
|
data->error = -ETIMEDOUT;
|
|
} else if (status & MCI_DCRCE) {
|
|
dev_dbg(&mmc->class_dev, "data CRC error\n");
|
|
data->error = -EILSEQ;
|
|
} else {
|
|
dev_dbg(&mmc->class_dev,
|
|
"data FIFO error (status=%08x)\n",
|
|
status);
|
|
data->error = -EIO;
|
|
}
|
|
|
|
if (host->present && data->stop
|
|
&& atmci_is_completed(host, EVENT_CMD_COMPLETE)
|
|
&& !atmci_test_and_set_completed(
|
|
host, EVENT_STOP_SENT))
|
|
send_stop_cmd(host->mmc, data);
|
|
|
|
host->data = NULL;
|
|
}
|
|
if (atmci_test_and_clear_pending(host, EVENT_DATA_COMPLETE)) {
|
|
atmci_set_completed(host, EVENT_DATA_COMPLETE);
|
|
|
|
if (!atmci_is_completed(host, EVENT_DATA_ERROR)) {
|
|
data->bytes_xfered = data->blocks * data->blksz;
|
|
data->error = 0;
|
|
}
|
|
|
|
host->data = NULL;
|
|
}
|
|
|
|
if (host->mrq && !host->cmd && !host->data)
|
|
atmci_request_end(mmc, host->mrq);
|
|
}
|
|
|
|
static void atmci_read_data_pio(struct atmel_mci *host)
|
|
{
|
|
struct scatterlist *sg = host->sg;
|
|
void *buf = sg_virt(sg);
|
|
unsigned int offset = host->pio_offset;
|
|
struct mmc_data *data = host->data;
|
|
u32 value;
|
|
u32 status;
|
|
unsigned int nbytes = 0;
|
|
|
|
do {
|
|
value = mci_readl(host, RDR);
|
|
if (likely(offset + 4 <= sg->length)) {
|
|
put_unaligned(value, (u32 *)(buf + offset));
|
|
|
|
offset += 4;
|
|
nbytes += 4;
|
|
|
|
if (offset == sg->length) {
|
|
host->sg = sg = sg_next(sg);
|
|
if (!sg)
|
|
goto done;
|
|
|
|
offset = 0;
|
|
buf = sg_virt(sg);
|
|
}
|
|
} else {
|
|
unsigned int remaining = sg->length - offset;
|
|
memcpy(buf + offset, &value, remaining);
|
|
nbytes += remaining;
|
|
|
|
flush_dcache_page(sg_page(sg));
|
|
host->sg = sg = sg_next(sg);
|
|
if (!sg)
|
|
goto done;
|
|
|
|
offset = 4 - remaining;
|
|
buf = sg_virt(sg);
|
|
memcpy(buf, (u8 *)&value + remaining, offset);
|
|
nbytes += offset;
|
|
}
|
|
|
|
status = mci_readl(host, SR);
|
|
if (status & ATMCI_DATA_ERROR_FLAGS) {
|
|
mci_writel(host, IDR, (MCI_NOTBUSY | MCI_RXRDY
|
|
| ATMCI_DATA_ERROR_FLAGS));
|
|
host->data_status = status;
|
|
atmci_set_pending(host, EVENT_DATA_ERROR);
|
|
tasklet_schedule(&host->tasklet);
|
|
break;
|
|
}
|
|
} while (status & MCI_RXRDY);
|
|
|
|
host->pio_offset = offset;
|
|
data->bytes_xfered += nbytes;
|
|
|
|
return;
|
|
|
|
done:
|
|
mci_writel(host, IDR, MCI_RXRDY);
|
|
mci_writel(host, IER, MCI_NOTBUSY);
|
|
data->bytes_xfered += nbytes;
|
|
atmci_set_completed(host, EVENT_XFER_COMPLETE);
|
|
if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
|
|
&& !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
|
|
send_stop_cmd(host->mmc, data);
|
|
}
|
|
|
|
static void atmci_write_data_pio(struct atmel_mci *host)
|
|
{
|
|
struct scatterlist *sg = host->sg;
|
|
void *buf = sg_virt(sg);
|
|
unsigned int offset = host->pio_offset;
|
|
struct mmc_data *data = host->data;
|
|
u32 value;
|
|
u32 status;
|
|
unsigned int nbytes = 0;
|
|
|
|
do {
|
|
if (likely(offset + 4 <= sg->length)) {
|
|
value = get_unaligned((u32 *)(buf + offset));
|
|
mci_writel(host, TDR, value);
|
|
|
|
offset += 4;
|
|
nbytes += 4;
|
|
if (offset == sg->length) {
|
|
host->sg = sg = sg_next(sg);
|
|
if (!sg)
|
|
goto done;
|
|
|
|
offset = 0;
|
|
buf = sg_virt(sg);
|
|
}
|
|
} else {
|
|
unsigned int remaining = sg->length - offset;
|
|
|
|
value = 0;
|
|
memcpy(&value, buf + offset, remaining);
|
|
nbytes += remaining;
|
|
|
|
host->sg = sg = sg_next(sg);
|
|
if (!sg) {
|
|
mci_writel(host, TDR, value);
|
|
goto done;
|
|
}
|
|
|
|
offset = 4 - remaining;
|
|
buf = sg_virt(sg);
|
|
memcpy((u8 *)&value + remaining, buf, offset);
|
|
mci_writel(host, TDR, value);
|
|
nbytes += offset;
|
|
}
|
|
|
|
status = mci_readl(host, SR);
|
|
if (status & ATMCI_DATA_ERROR_FLAGS) {
|
|
mci_writel(host, IDR, (MCI_NOTBUSY | MCI_TXRDY
|
|
| ATMCI_DATA_ERROR_FLAGS));
|
|
host->data_status = status;
|
|
atmci_set_pending(host, EVENT_DATA_ERROR);
|
|
tasklet_schedule(&host->tasklet);
|
|
break;
|
|
}
|
|
} while (status & MCI_TXRDY);
|
|
|
|
host->pio_offset = offset;
|
|
data->bytes_xfered += nbytes;
|
|
|
|
return;
|
|
|
|
done:
|
|
mci_writel(host, IDR, MCI_TXRDY);
|
|
mci_writel(host, IER, MCI_NOTBUSY);
|
|
data->bytes_xfered += nbytes;
|
|
atmci_set_completed(host, EVENT_XFER_COMPLETE);
|
|
if (data->stop && atmci_is_completed(host, EVENT_CMD_COMPLETE)
|
|
&& !atmci_test_and_set_completed(host, EVENT_STOP_SENT))
|
|
send_stop_cmd(host->mmc, data);
|
|
}
|
|
|
|
static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
|
|
{
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
mci_writel(host, IDR, MCI_CMDRDY);
|
|
|
|
if (atmci_is_completed(host, EVENT_STOP_SENT)) {
|
|
host->stop_status = status;
|
|
atmci_set_pending(host, EVENT_STOP_COMPLETE);
|
|
} else {
|
|
host->cmd_status = status;
|
|
atmci_set_pending(host, EVENT_CMD_COMPLETE);
|
|
}
|
|
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
|
|
static irqreturn_t atmci_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mmc_host *mmc = dev_id;
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
u32 status, mask, pending;
|
|
unsigned int pass_count = 0;
|
|
|
|
spin_lock(&mmc->lock);
|
|
|
|
do {
|
|
status = mci_readl(host, SR);
|
|
mask = mci_readl(host, IMR);
|
|
pending = status & mask;
|
|
if (!pending)
|
|
break;
|
|
|
|
if (pending & ATMCI_DATA_ERROR_FLAGS) {
|
|
mci_writel(host, IDR, ATMCI_DATA_ERROR_FLAGS
|
|
| MCI_RXRDY | MCI_TXRDY);
|
|
pending &= mci_readl(host, IMR);
|
|
host->data_status = status;
|
|
atmci_set_pending(host, EVENT_DATA_ERROR);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
if (pending & MCI_NOTBUSY) {
|
|
mci_writel(host, IDR, (MCI_NOTBUSY
|
|
| ATMCI_DATA_ERROR_FLAGS));
|
|
atmci_set_pending(host, EVENT_DATA_COMPLETE);
|
|
tasklet_schedule(&host->tasklet);
|
|
}
|
|
if (pending & MCI_RXRDY)
|
|
atmci_read_data_pio(host);
|
|
if (pending & MCI_TXRDY)
|
|
atmci_write_data_pio(host);
|
|
|
|
if (pending & MCI_CMDRDY)
|
|
atmci_cmd_interrupt(mmc, status);
|
|
} while (pass_count++ < 5);
|
|
|
|
spin_unlock(&mmc->lock);
|
|
|
|
return pass_count ? IRQ_HANDLED : IRQ_NONE;
|
|
}
|
|
|
|
static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mmc_host *mmc = dev_id;
|
|
struct atmel_mci *host = mmc_priv(mmc);
|
|
|
|
/*
|
|
* Disable interrupts until the pin has stabilized and check
|
|
* the state then. Use mod_timer() since we may be in the
|
|
* middle of the timer routine when this interrupt triggers.
|
|
*/
|
|
disable_irq_nosync(irq);
|
|
mod_timer(&host->detect_timer, jiffies + msecs_to_jiffies(20));
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int __init atmci_probe(struct platform_device *pdev)
|
|
{
|
|
struct mci_platform_data *pdata;
|
|
struct atmel_mci *host;
|
|
struct mmc_host *mmc;
|
|
struct resource *regs;
|
|
int irq;
|
|
int ret;
|
|
|
|
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!regs)
|
|
return -ENXIO;
|
|
pdata = pdev->dev.platform_data;
|
|
if (!pdata)
|
|
return -ENXIO;
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
|
|
if (!mmc)
|
|
return -ENOMEM;
|
|
|
|
host = mmc_priv(mmc);
|
|
host->pdev = pdev;
|
|
host->mmc = mmc;
|
|
host->detect_pin = pdata->detect_pin;
|
|
host->wp_pin = pdata->wp_pin;
|
|
|
|
host->mck = clk_get(&pdev->dev, "mci_clk");
|
|
if (IS_ERR(host->mck)) {
|
|
ret = PTR_ERR(host->mck);
|
|
goto err_clk_get;
|
|
}
|
|
|
|
ret = -ENOMEM;
|
|
host->regs = ioremap(regs->start, regs->end - regs->start + 1);
|
|
if (!host->regs)
|
|
goto err_ioremap;
|
|
|
|
clk_enable(host->mck);
|
|
mci_writel(host, CR, MCI_CR_SWRST);
|
|
host->bus_hz = clk_get_rate(host->mck);
|
|
clk_disable(host->mck);
|
|
|
|
host->mapbase = regs->start;
|
|
|
|
mmc->ops = &atmci_ops;
|
|
mmc->f_min = (host->bus_hz + 511) / 512;
|
|
mmc->f_max = host->bus_hz / 2;
|
|
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
mmc->caps |= MMC_CAP_4_BIT_DATA;
|
|
|
|
mmc->max_hw_segs = 64;
|
|
mmc->max_phys_segs = 64;
|
|
mmc->max_req_size = 32768 * 512;
|
|
mmc->max_blk_size = 32768;
|
|
mmc->max_blk_count = 512;
|
|
|
|
tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)mmc);
|
|
|
|
ret = request_irq(irq, atmci_interrupt, 0, pdev->dev.bus_id, mmc);
|
|
if (ret)
|
|
goto err_request_irq;
|
|
|
|
/* Assume card is present if we don't have a detect pin */
|
|
host->present = 1;
|
|
if (gpio_is_valid(host->detect_pin)) {
|
|
if (gpio_request(host->detect_pin, "mmc_detect")) {
|
|
dev_dbg(&mmc->class_dev, "no detect pin available\n");
|
|
host->detect_pin = -1;
|
|
} else {
|
|
host->present = !gpio_get_value(host->detect_pin);
|
|
}
|
|
}
|
|
if (gpio_is_valid(host->wp_pin)) {
|
|
if (gpio_request(host->wp_pin, "mmc_wp")) {
|
|
dev_dbg(&mmc->class_dev, "no WP pin available\n");
|
|
host->wp_pin = -1;
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, host);
|
|
|
|
mmc_add_host(mmc);
|
|
|
|
if (gpio_is_valid(host->detect_pin)) {
|
|
setup_timer(&host->detect_timer, atmci_detect_change,
|
|
(unsigned long)host);
|
|
|
|
ret = request_irq(gpio_to_irq(host->detect_pin),
|
|
atmci_detect_interrupt,
|
|
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
|
|
"mmc-detect", mmc);
|
|
if (ret) {
|
|
dev_dbg(&mmc->class_dev,
|
|
"could not request IRQ %d for detect pin\n",
|
|
gpio_to_irq(host->detect_pin));
|
|
gpio_free(host->detect_pin);
|
|
host->detect_pin = -1;
|
|
}
|
|
}
|
|
|
|
dev_info(&mmc->class_dev,
|
|
"Atmel MCI controller at 0x%08lx irq %d\n",
|
|
host->mapbase, irq);
|
|
|
|
atmci_init_debugfs(host);
|
|
|
|
return 0;
|
|
|
|
err_request_irq:
|
|
iounmap(host->regs);
|
|
err_ioremap:
|
|
clk_put(host->mck);
|
|
err_clk_get:
|
|
mmc_free_host(mmc);
|
|
return ret;
|
|
}
|
|
|
|
static int __exit atmci_remove(struct platform_device *pdev)
|
|
{
|
|
struct atmel_mci *host = platform_get_drvdata(pdev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
if (host) {
|
|
/* Debugfs stuff is cleaned up by mmc core */
|
|
|
|
if (gpio_is_valid(host->detect_pin)) {
|
|
int pin = host->detect_pin;
|
|
|
|
/* Make sure the timer doesn't enable the interrupt */
|
|
host->detect_pin = -1;
|
|
smp_wmb();
|
|
|
|
free_irq(gpio_to_irq(pin), host->mmc);
|
|
del_timer_sync(&host->detect_timer);
|
|
gpio_free(pin);
|
|
}
|
|
|
|
mmc_remove_host(host->mmc);
|
|
|
|
clk_enable(host->mck);
|
|
mci_writel(host, IDR, ~0UL);
|
|
mci_writel(host, CR, MCI_CR_MCIDIS);
|
|
mci_readl(host, SR);
|
|
clk_disable(host->mck);
|
|
|
|
if (gpio_is_valid(host->wp_pin))
|
|
gpio_free(host->wp_pin);
|
|
|
|
free_irq(platform_get_irq(pdev, 0), host->mmc);
|
|
iounmap(host->regs);
|
|
|
|
clk_put(host->mck);
|
|
|
|
mmc_free_host(host->mmc);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver atmci_driver = {
|
|
.remove = __exit_p(atmci_remove),
|
|
.driver = {
|
|
.name = "atmel_mci",
|
|
},
|
|
};
|
|
|
|
static int __init atmci_init(void)
|
|
{
|
|
return platform_driver_probe(&atmci_driver, atmci_probe);
|
|
}
|
|
|
|
static void __exit atmci_exit(void)
|
|
{
|
|
platform_driver_unregister(&atmci_driver);
|
|
}
|
|
|
|
module_init(atmci_init);
|
|
module_exit(atmci_exit);
|
|
|
|
MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
|
|
MODULE_AUTHOR("Haavard Skinnemoen <haavard.skinnemoen@atmel.com>");
|
|
MODULE_LICENSE("GPL v2");
|