android_kernel_motorola_sm6225/drivers/usb/gadget/uvc_video.c
Bhupesh Sharma 326b0e613b usb: gadget: uvc: Make video streaming buffer size comply with USB3.0 SS
As per the USB3.0 specs, the bandwidth requirements of a UVC's video
streaming endpoint will change to support super-speed. These changes
will be dependent on whether the UVC video streaming endpoint is Bulk or
Isochronous:

- If video streaming endpoint is Isochronous:
  As per Section 4.4.8.2 (Isochronous Transfer Bandwidth Requirements)
  of the USB3.0 specs:

    A SuperSpeed isochronous endpoint can move up to three burst
    transactions of up to 16 maximum sized packets (3 * 16 * 1024 bytes)
    per service interval.

- If video streaming endpoint is Bulk:
  As per 4.4.6.1 (Bulk Transfer Data Packet Size) of the USB3.0 specs:

    An endpoint for bulk transfers shall set the maximum data packet
    payload size in its endpoint descriptor to 1024 bytes. It also
    specifies the burst size that the endpoint can accept from or
    transmit on the SuperSpeed bus. The allowable burst size for a bulk
    endpoint shall be in the range of 1 to 16.

So, in the Isochronous case, we can define the USB request's buffer to
be equal to = (Maximum packet size) * (bMaxBurst + 1) * (Mult + 1), so
that the UDC driver can try to send out this buffer in one Isochronous
service interval.

The same computation will hold good for the Bulk case as the Mult
value is 0 here and we can have a USB request buffer of maximum
16 * 1024 bytes size, which can be sent out by the UDC driver as
per the Bulk bandwidth allocation on the USB3 bus.

This patch adds the above-mentioned support and is also USB2.0 backward
compliant.

Signed-off-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Bhupesh Sharma <bhupesh.sharma@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-03-18 11:18:22 +02:00

390 lines
9.5 KiB
C

/*
* uvc_video.c -- USB Video Class Gadget driver
*
* Copyright (C) 2009-2010
* Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <media/v4l2-dev.h>
#include "uvc.h"
#include "uvc_queue.h"
/* --------------------------------------------------------------------------
* Video codecs
*/
static int
uvc_video_encode_header(struct uvc_video *video, struct uvc_buffer *buf,
u8 *data, int len)
{
data[0] = 2;
data[1] = UVC_STREAM_EOH | video->fid;
if (buf->buf.bytesused - video->queue.buf_used <= len - 2)
data[1] |= UVC_STREAM_EOF;
return 2;
}
static int
uvc_video_encode_data(struct uvc_video *video, struct uvc_buffer *buf,
u8 *data, int len)
{
struct uvc_video_queue *queue = &video->queue;
unsigned int nbytes;
void *mem;
/* Copy video data to the USB buffer. */
mem = queue->mem + buf->buf.m.offset + queue->buf_used;
nbytes = min((unsigned int)len, buf->buf.bytesused - queue->buf_used);
memcpy(data, mem, nbytes);
queue->buf_used += nbytes;
return nbytes;
}
static void
uvc_video_encode_bulk(struct usb_request *req, struct uvc_video *video,
struct uvc_buffer *buf)
{
void *mem = req->buf;
int len = video->req_size;
int ret;
/* Add a header at the beginning of the payload. */
if (video->payload_size == 0) {
ret = uvc_video_encode_header(video, buf, mem, len);
video->payload_size += ret;
mem += ret;
len -= ret;
}
/* Process video data. */
len = min((int)(video->max_payload_size - video->payload_size), len);
ret = uvc_video_encode_data(video, buf, mem, len);
video->payload_size += ret;
len -= ret;
req->length = video->req_size - len;
req->zero = video->payload_size == video->max_payload_size;
if (buf->buf.bytesused == video->queue.buf_used) {
video->queue.buf_used = 0;
buf->state = UVC_BUF_STATE_DONE;
uvc_queue_next_buffer(&video->queue, buf);
video->fid ^= UVC_STREAM_FID;
video->payload_size = 0;
}
if (video->payload_size == video->max_payload_size ||
buf->buf.bytesused == video->queue.buf_used)
video->payload_size = 0;
}
static void
uvc_video_encode_isoc(struct usb_request *req, struct uvc_video *video,
struct uvc_buffer *buf)
{
void *mem = req->buf;
int len = video->req_size;
int ret;
/* Add the header. */
ret = uvc_video_encode_header(video, buf, mem, len);
mem += ret;
len -= ret;
/* Process video data. */
ret = uvc_video_encode_data(video, buf, mem, len);
len -= ret;
req->length = video->req_size - len;
if (buf->buf.bytesused == video->queue.buf_used) {
video->queue.buf_used = 0;
buf->state = UVC_BUF_STATE_DONE;
uvc_queue_next_buffer(&video->queue, buf);
video->fid ^= UVC_STREAM_FID;
}
}
/* --------------------------------------------------------------------------
* Request handling
*/
/*
* I somehow feel that synchronisation won't be easy to achieve here. We have
* three events that control USB requests submission:
*
* - USB request completion: the completion handler will resubmit the request
* if a video buffer is available.
*
* - USB interface setting selection: in response to a SET_INTERFACE request,
* the handler will start streaming if a video buffer is available and if
* video is not currently streaming.
*
* - V4L2 buffer queueing: the driver will start streaming if video is not
* currently streaming.
*
* Race conditions between those 3 events might lead to deadlocks or other
* nasty side effects.
*
* The "video currently streaming" condition can't be detected by the irqqueue
* being empty, as a request can still be in flight. A separate "queue paused"
* flag is thus needed.
*
* The paused flag will be set when we try to retrieve the irqqueue head if the
* queue is empty, and cleared when we queue a buffer.
*
* The USB request completion handler will get the buffer at the irqqueue head
* under protection of the queue spinlock. If the queue is empty, the streaming
* paused flag will be set. Right after releasing the spinlock a userspace
* application can queue a buffer. The flag will then cleared, and the ioctl
* handler will restart the video stream.
*/
static void
uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
{
struct uvc_video *video = req->context;
struct uvc_buffer *buf;
unsigned long flags;
int ret;
switch (req->status) {
case 0:
break;
case -ESHUTDOWN:
printk(KERN_INFO "VS request cancelled.\n");
goto requeue;
default:
printk(KERN_INFO "VS request completed with status %d.\n",
req->status);
goto requeue;
}
spin_lock_irqsave(&video->queue.irqlock, flags);
buf = uvc_queue_head(&video->queue);
if (buf == NULL) {
spin_unlock_irqrestore(&video->queue.irqlock, flags);
goto requeue;
}
video->encode(req, video, buf);
if ((ret = usb_ep_queue(ep, req, GFP_ATOMIC)) < 0) {
printk(KERN_INFO "Failed to queue request (%d).\n", ret);
usb_ep_set_halt(ep);
spin_unlock_irqrestore(&video->queue.irqlock, flags);
goto requeue;
}
spin_unlock_irqrestore(&video->queue.irqlock, flags);
return;
requeue:
spin_lock_irqsave(&video->req_lock, flags);
list_add_tail(&req->list, &video->req_free);
spin_unlock_irqrestore(&video->req_lock, flags);
}
static int
uvc_video_free_requests(struct uvc_video *video)
{
unsigned int i;
for (i = 0; i < UVC_NUM_REQUESTS; ++i) {
if (video->req[i]) {
usb_ep_free_request(video->ep, video->req[i]);
video->req[i] = NULL;
}
if (video->req_buffer[i]) {
kfree(video->req_buffer[i]);
video->req_buffer[i] = NULL;
}
}
INIT_LIST_HEAD(&video->req_free);
video->req_size = 0;
return 0;
}
static int
uvc_video_alloc_requests(struct uvc_video *video)
{
unsigned int req_size;
unsigned int i;
int ret = -ENOMEM;
BUG_ON(video->req_size);
req_size = video->ep->maxpacket
* max_t(unsigned int, video->ep->maxburst, 1)
* (video->ep->mult + 1);
for (i = 0; i < UVC_NUM_REQUESTS; ++i) {
video->req_buffer[i] = kmalloc(req_size, GFP_KERNEL);
if (video->req_buffer[i] == NULL)
goto error;
video->req[i] = usb_ep_alloc_request(video->ep, GFP_KERNEL);
if (video->req[i] == NULL)
goto error;
video->req[i]->buf = video->req_buffer[i];
video->req[i]->length = 0;
video->req[i]->complete = uvc_video_complete;
video->req[i]->context = video;
list_add_tail(&video->req[i]->list, &video->req_free);
}
video->req_size = req_size;
return 0;
error:
uvc_video_free_requests(video);
return ret;
}
/* --------------------------------------------------------------------------
* Video streaming
*/
/*
* uvc_video_pump - Pump video data into the USB requests
*
* This function fills the available USB requests (listed in req_free) with
* video data from the queued buffers.
*/
static int
uvc_video_pump(struct uvc_video *video)
{
struct usb_request *req;
struct uvc_buffer *buf;
unsigned long flags;
int ret;
/* FIXME TODO Race between uvc_video_pump and requests completion
* handler ???
*/
while (1) {
/* Retrieve the first available USB request, protected by the
* request lock.
*/
spin_lock_irqsave(&video->req_lock, flags);
if (list_empty(&video->req_free)) {
spin_unlock_irqrestore(&video->req_lock, flags);
return 0;
}
req = list_first_entry(&video->req_free, struct usb_request,
list);
list_del(&req->list);
spin_unlock_irqrestore(&video->req_lock, flags);
/* Retrieve the first available video buffer and fill the
* request, protected by the video queue irqlock.
*/
spin_lock_irqsave(&video->queue.irqlock, flags);
buf = uvc_queue_head(&video->queue);
if (buf == NULL) {
spin_unlock_irqrestore(&video->queue.irqlock, flags);
break;
}
video->encode(req, video, buf);
/* Queue the USB request */
if ((ret = usb_ep_queue(video->ep, req, GFP_KERNEL)) < 0) {
printk(KERN_INFO "Failed to queue request (%d)\n", ret);
usb_ep_set_halt(video->ep);
spin_unlock_irqrestore(&video->queue.irqlock, flags);
break;
}
spin_unlock_irqrestore(&video->queue.irqlock, flags);
}
spin_lock_irqsave(&video->req_lock, flags);
list_add_tail(&req->list, &video->req_free);
spin_unlock_irqrestore(&video->req_lock, flags);
return 0;
}
/*
* Enable or disable the video stream.
*/
static int
uvc_video_enable(struct uvc_video *video, int enable)
{
unsigned int i;
int ret;
if (video->ep == NULL) {
printk(KERN_INFO "Video enable failed, device is "
"uninitialized.\n");
return -ENODEV;
}
if (!enable) {
for (i = 0; i < UVC_NUM_REQUESTS; ++i)
usb_ep_dequeue(video->ep, video->req[i]);
uvc_video_free_requests(video);
uvc_queue_enable(&video->queue, 0);
return 0;
}
if ((ret = uvc_queue_enable(&video->queue, 1)) < 0)
return ret;
if ((ret = uvc_video_alloc_requests(video)) < 0)
return ret;
if (video->max_payload_size) {
video->encode = uvc_video_encode_bulk;
video->payload_size = 0;
} else
video->encode = uvc_video_encode_isoc;
return uvc_video_pump(video);
}
/*
* Initialize the UVC video stream.
*/
static int
uvc_video_init(struct uvc_video *video)
{
INIT_LIST_HEAD(&video->req_free);
spin_lock_init(&video->req_lock);
video->fcc = V4L2_PIX_FMT_YUYV;
video->bpp = 16;
video->width = 320;
video->height = 240;
video->imagesize = 320 * 240 * 2;
/* Initialize the video buffers queue. */
uvc_queue_init(&video->queue, V4L2_BUF_TYPE_VIDEO_OUTPUT);
return 0;
}