c07f87f22e
Add power management support to the VIC by registering each VIC as a system device to get suspend/resume events going. Since the VIC registeration is done early, we need to record the VICs in a static array which is used to add the system devices later once the initcalls are run. This means there is now a configuration value for the number of VICs in the system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
256 lines
6.1 KiB
C
256 lines
6.1 KiB
C
/* arch/arm/plat-s3c64xx/irq.c
|
|
*
|
|
* Copyright 2008 Openmoko, Inc.
|
|
* Copyright 2008 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
* http://armlinux.simtec.co.uk/
|
|
*
|
|
* S3C64XX - Interrupt handling
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/hardware/vic.h>
|
|
|
|
#include <mach/map.h>
|
|
#include <plat/regs-serial.h>
|
|
#include <plat/regs-timer.h>
|
|
#include <plat/cpu.h>
|
|
|
|
/* Timer interrupt handling */
|
|
|
|
static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq)
|
|
{
|
|
generic_handle_irq(sub_irq);
|
|
}
|
|
|
|
static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
s3c_irq_demux_timer(irq, IRQ_TIMER0);
|
|
}
|
|
|
|
static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
s3c_irq_demux_timer(irq, IRQ_TIMER1);
|
|
}
|
|
|
|
static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
s3c_irq_demux_timer(irq, IRQ_TIMER2);
|
|
}
|
|
|
|
static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
s3c_irq_demux_timer(irq, IRQ_TIMER3);
|
|
}
|
|
|
|
static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
s3c_irq_demux_timer(irq, IRQ_TIMER4);
|
|
}
|
|
|
|
/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */
|
|
|
|
static void s3c_irq_timer_mask(unsigned int irq)
|
|
{
|
|
u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
|
|
|
|
reg &= 0x1f; /* mask out pending interrupts */
|
|
reg &= ~(1 << (irq - IRQ_TIMER0));
|
|
__raw_writel(reg, S3C64XX_TINT_CSTAT);
|
|
}
|
|
|
|
static void s3c_irq_timer_unmask(unsigned int irq)
|
|
{
|
|
u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
|
|
|
|
reg &= 0x1f; /* mask out pending interrupts */
|
|
reg |= 1 << (irq - IRQ_TIMER0);
|
|
__raw_writel(reg, S3C64XX_TINT_CSTAT);
|
|
}
|
|
|
|
static void s3c_irq_timer_ack(unsigned int irq)
|
|
{
|
|
u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
|
|
|
|
reg &= 0x1f;
|
|
reg |= (1 << 5) << (irq - IRQ_TIMER0);
|
|
__raw_writel(reg, S3C64XX_TINT_CSTAT);
|
|
}
|
|
|
|
static struct irq_chip s3c_irq_timer = {
|
|
.name = "s3c-timer",
|
|
.mask = s3c_irq_timer_mask,
|
|
.unmask = s3c_irq_timer_unmask,
|
|
.ack = s3c_irq_timer_ack,
|
|
};
|
|
|
|
struct uart_irq {
|
|
void __iomem *regs;
|
|
unsigned int base_irq;
|
|
unsigned int parent_irq;
|
|
};
|
|
|
|
/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
|
|
* are consecutive when looking up the interrupt in the demux routines.
|
|
*/
|
|
static struct uart_irq uart_irqs[] = {
|
|
[0] = {
|
|
.regs = S3C_VA_UART0,
|
|
.base_irq = IRQ_S3CUART_BASE0,
|
|
.parent_irq = IRQ_UART0,
|
|
},
|
|
[1] = {
|
|
.regs = S3C_VA_UART1,
|
|
.base_irq = IRQ_S3CUART_BASE1,
|
|
.parent_irq = IRQ_UART1,
|
|
},
|
|
[2] = {
|
|
.regs = S3C_VA_UART2,
|
|
.base_irq = IRQ_S3CUART_BASE2,
|
|
.parent_irq = IRQ_UART2,
|
|
},
|
|
[3] = {
|
|
.regs = S3C_VA_UART3,
|
|
.base_irq = IRQ_S3CUART_BASE3,
|
|
.parent_irq = IRQ_UART3,
|
|
},
|
|
};
|
|
|
|
static inline void __iomem *s3c_irq_uart_base(unsigned int irq)
|
|
{
|
|
struct uart_irq *uirq = get_irq_chip_data(irq);
|
|
return uirq->regs;
|
|
}
|
|
|
|
static inline unsigned int s3c_irq_uart_bit(unsigned int irq)
|
|
{
|
|
return irq & 3;
|
|
}
|
|
|
|
/* UART interrupt registers, not worth adding to seperate include header */
|
|
|
|
static void s3c_irq_uart_mask(unsigned int irq)
|
|
{
|
|
void __iomem *regs = s3c_irq_uart_base(irq);
|
|
unsigned int bit = s3c_irq_uart_bit(irq);
|
|
u32 reg;
|
|
|
|
reg = __raw_readl(regs + S3C64XX_UINTM);
|
|
reg |= (1 << bit);
|
|
__raw_writel(reg, regs + S3C64XX_UINTM);
|
|
}
|
|
|
|
static void s3c_irq_uart_maskack(unsigned int irq)
|
|
{
|
|
void __iomem *regs = s3c_irq_uart_base(irq);
|
|
unsigned int bit = s3c_irq_uart_bit(irq);
|
|
u32 reg;
|
|
|
|
reg = __raw_readl(regs + S3C64XX_UINTM);
|
|
reg |= (1 << bit);
|
|
__raw_writel(reg, regs + S3C64XX_UINTM);
|
|
__raw_writel(1 << bit, regs + S3C64XX_UINTP);
|
|
}
|
|
|
|
static void s3c_irq_uart_unmask(unsigned int irq)
|
|
{
|
|
void __iomem *regs = s3c_irq_uart_base(irq);
|
|
unsigned int bit = s3c_irq_uart_bit(irq);
|
|
u32 reg;
|
|
|
|
reg = __raw_readl(regs + S3C64XX_UINTM);
|
|
reg &= ~(1 << bit);
|
|
__raw_writel(reg, regs + S3C64XX_UINTM);
|
|
}
|
|
|
|
static void s3c_irq_uart_ack(unsigned int irq)
|
|
{
|
|
void __iomem *regs = s3c_irq_uart_base(irq);
|
|
unsigned int bit = s3c_irq_uart_bit(irq);
|
|
|
|
__raw_writel(1 << bit, regs + S3C64XX_UINTP);
|
|
}
|
|
|
|
static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0];
|
|
u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
|
|
int base = uirq->base_irq;
|
|
|
|
if (pend & (1 << 0))
|
|
generic_handle_irq(base);
|
|
if (pend & (1 << 1))
|
|
generic_handle_irq(base + 1);
|
|
if (pend & (1 << 2))
|
|
generic_handle_irq(base + 2);
|
|
if (pend & (1 << 3))
|
|
generic_handle_irq(base + 3);
|
|
}
|
|
|
|
static struct irq_chip s3c_irq_uart = {
|
|
.name = "s3c-uart",
|
|
.mask = s3c_irq_uart_mask,
|
|
.unmask = s3c_irq_uart_unmask,
|
|
.mask_ack = s3c_irq_uart_maskack,
|
|
.ack = s3c_irq_uart_ack,
|
|
};
|
|
|
|
static void __init s3c64xx_uart_irq(struct uart_irq *uirq)
|
|
{
|
|
void __iomem *reg_base = uirq->regs;
|
|
unsigned int irq;
|
|
int offs;
|
|
|
|
/* mask all interrupts at the start. */
|
|
__raw_writel(0xf, reg_base + S3C64XX_UINTM);
|
|
|
|
for (offs = 0; offs < 3; offs++) {
|
|
irq = uirq->base_irq + offs;
|
|
|
|
set_irq_chip(irq, &s3c_irq_uart);
|
|
set_irq_chip_data(irq, uirq);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
|
|
set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
|
|
}
|
|
|
|
void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
|
|
{
|
|
int uart, irq;
|
|
|
|
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
|
|
|
|
/* initialise the pair of VICs */
|
|
vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
|
|
vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
|
|
|
|
/* add the timer sub-irqs */
|
|
|
|
set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0);
|
|
set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1);
|
|
set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2);
|
|
set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3);
|
|
set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4);
|
|
|
|
for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) {
|
|
set_irq_chip(irq, &s3c_irq_timer);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID);
|
|
}
|
|
|
|
for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++)
|
|
s3c64xx_uart_irq(&uart_irqs[uart]);
|
|
}
|
|
|
|
|