cc155c6f2c
For some platforms, it is inappropriate to register all PXA UARTs. In some cases, the UARTs may not be used, and in others we may want to avoid registering the UARTs to allow other drivers (eg, FICP) to make use of the UART. In addition, a while back there was a request to be able to pass platform data to the UART driver. This patch enables all of this by providing functions platforms can call to register each individual UART. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
800 lines
18 KiB
C
800 lines
18 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/stargate2.c
|
|
*
|
|
* Author: Ed C. Epp
|
|
* Created: Nov 05, 2002
|
|
* Copyright: Intel Corp.
|
|
*
|
|
* Modified 2009: Jonathan Cameron <jic23@cam.ac.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/plat-ram.h>
|
|
#include <linux/mtd/partitions.h>
|
|
|
|
#include <linux/i2c/pcf857x.h>
|
|
#include <linux/i2c/at24.h>
|
|
#include <linux/smc91x.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include <mach/pxa27x.h>
|
|
#include <plat/i2c.h>
|
|
#include <mach/mmc.h>
|
|
#include <mach/udc.h>
|
|
#include <mach/pxa2xx_spi.h>
|
|
#include <mach/pxa27x-udc.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/mfd/da903x.h>
|
|
#include <linux/sht15.h>
|
|
|
|
#include "devices.h"
|
|
#include "generic.h"
|
|
|
|
/* Bluetooth */
|
|
#define SG2_BT_RESET 81
|
|
|
|
/* SD */
|
|
#define SG2_GPIO_nSD_DETECT 90
|
|
#define SG2_SD_POWER_ENABLE 89
|
|
|
|
static unsigned long stargate2_pin_config[] __initdata = {
|
|
|
|
GPIO15_nCS_1, /* SRAM */
|
|
/* SMC91x */
|
|
GPIO80_nCS_4,
|
|
GPIO40_GPIO, /*cable detect?*/
|
|
/* Device Identification for wakeup*/
|
|
GPIO102_GPIO,
|
|
|
|
/* Button */
|
|
GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH,
|
|
|
|
/* DA9030 */
|
|
GPIO1_GPIO,
|
|
|
|
/* Compact Flash */
|
|
GPIO79_PSKTSEL,
|
|
GPIO48_nPOE,
|
|
GPIO49_nPWE,
|
|
GPIO50_nPIOR,
|
|
GPIO51_nPIOW,
|
|
GPIO85_nPCE_1,
|
|
GPIO54_nPCE_2,
|
|
GPIO55_nPREG,
|
|
GPIO56_nPWAIT,
|
|
GPIO57_nIOIS16,
|
|
GPIO120_GPIO, /* Buff ctrl */
|
|
GPIO108_GPIO, /* Power ctrl */
|
|
GPIO82_GPIO, /* Reset */
|
|
GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */
|
|
|
|
/* MMC */
|
|
GPIO32_MMC_CLK,
|
|
GPIO112_MMC_CMD,
|
|
GPIO92_MMC_DAT_0,
|
|
GPIO109_MMC_DAT_1,
|
|
GPIO110_MMC_DAT_2,
|
|
GPIO111_MMC_DAT_3,
|
|
GPIO90_GPIO, /* nSD detect */
|
|
GPIO89_GPIO, /* SD_POWER_ENABLE */
|
|
|
|
/* Bluetooth */
|
|
GPIO81_GPIO, /* reset */
|
|
|
|
/* cc2420 802.15.4 radio */
|
|
GPIO22_GPIO, /* CC_RSTN (out)*/
|
|
GPIO114_GPIO, /* CC_FIFO (in) */
|
|
GPIO116_GPIO, /* CC_CCA (in) */
|
|
GPIO0_GPIO, /* CC_FIFOP (in) */
|
|
GPIO16_GPIO, /* CCSFD (in) */
|
|
GPIO39_GPIO, /* CSn (out) */
|
|
|
|
/* I2C */
|
|
GPIO117_I2C_SCL,
|
|
GPIO118_I2C_SDA,
|
|
|
|
/* SSP 3 - 802.15.4 radio */
|
|
GPIO39_GPIO, /* chip select */
|
|
GPIO34_SSP3_SCLK,
|
|
GPIO35_SSP3_TXD,
|
|
GPIO41_SSP3_RXD,
|
|
|
|
/* SSP 2 */
|
|
GPIO11_SSP2_RXD,
|
|
GPIO38_SSP2_TXD,
|
|
GPIO36_SSP2_SCLK,
|
|
GPIO37_GPIO, /* chip select */
|
|
|
|
/* SSP 1 */
|
|
GPIO26_SSP1_RXD,
|
|
GPIO25_SSP1_TXD,
|
|
GPIO23_SSP1_SCLK,
|
|
GPIO24_GPIO, /* chip select */
|
|
|
|
/* BTUART */
|
|
GPIO42_BTUART_RXD,
|
|
GPIO43_BTUART_TXD,
|
|
GPIO44_BTUART_CTS,
|
|
GPIO45_BTUART_RTS,
|
|
|
|
/* STUART */
|
|
GPIO46_STUART_RXD,
|
|
GPIO47_STUART_TXD,
|
|
|
|
/* Basic sensor board */
|
|
GPIO96_GPIO, /* accelerometer interrupt */
|
|
GPIO99_GPIO, /* ADC interrupt */
|
|
|
|
/* Connector pins specified as gpios */
|
|
GPIO94_GPIO, /* large basic connector pin 14 */
|
|
GPIO10_GPIO, /* large basic connector pin 23 */
|
|
|
|
/* SHT15 */
|
|
GPIO100_GPIO,
|
|
GPIO98_GPIO,
|
|
};
|
|
|
|
/**
|
|
* stargate2_reset_bluetooth() reset the bluecore to ensure consistent state
|
|
**/
|
|
static int stargate2_reset_bluetooth(void)
|
|
{
|
|
int err;
|
|
err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET");
|
|
if (err) {
|
|
printk(KERN_ERR "Could not get gpio for bluetooth reset \n");
|
|
return err;
|
|
}
|
|
gpio_direction_output(SG2_BT_RESET, 1);
|
|
mdelay(5);
|
|
/* now reset it - 5 msec minimum */
|
|
gpio_set_value(SG2_BT_RESET, 0);
|
|
mdelay(10);
|
|
gpio_set_value(SG2_BT_RESET, 1);
|
|
gpio_free(SG2_BT_RESET);
|
|
return 0;
|
|
}
|
|
|
|
static struct led_info stargate2_leds[] = {
|
|
{
|
|
.name = "sg2:red",
|
|
.flags = DA9030_LED_RATE_ON,
|
|
}, {
|
|
.name = "sg2:blue",
|
|
.flags = DA9030_LED_RATE_ON,
|
|
}, {
|
|
.name = "sg2:green",
|
|
.flags = DA9030_LED_RATE_ON,
|
|
},
|
|
};
|
|
|
|
static struct sht15_platform_data platform_data_sht15 = {
|
|
.gpio_data = 100,
|
|
.gpio_sck = 98,
|
|
};
|
|
|
|
static struct platform_device sht15 = {
|
|
.name = "sht15",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &platform_data_sht15,
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply stargate2_sensor_3_con[] = {
|
|
{
|
|
.dev = &sht15.dev,
|
|
.supply = "vcc",
|
|
},
|
|
};
|
|
|
|
enum stargate2_ldos{
|
|
vcc_vref,
|
|
vcc_cc2420,
|
|
/* a mote connector? */
|
|
vcc_mica,
|
|
/* the CSR bluecore chip */
|
|
vcc_bt,
|
|
/* The two voltages available to sensor boards */
|
|
vcc_sensor_1_8,
|
|
vcc_sensor_3,
|
|
/* directly connected to the pxa27x */
|
|
vcc_sram_ext,
|
|
vcc_pxa_pll,
|
|
vcc_pxa_usim, /* Reference voltage for certain gpios */
|
|
vcc_pxa_mem,
|
|
vcc_pxa_flash,
|
|
vcc_pxa_core, /*Dc-Dc buck not yet supported */
|
|
vcc_lcd,
|
|
vcc_bb,
|
|
vcc_bbio, /*not sure!*/
|
|
vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/
|
|
};
|
|
|
|
/* The values of the various regulator constraints are obviously dependent
|
|
* on exactly what is wired to each ldo. Unfortunately this information is
|
|
* not generally available. More information has been requested from Xbow.
|
|
*/
|
|
static struct regulator_init_data stargate2_ldo_init_data[] = {
|
|
[vcc_bbio] = {
|
|
.constraints = { /* board default 1.8V */
|
|
.name = "vcc_bbio",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
[vcc_bb] = {
|
|
.constraints = { /* board default 2.8V */
|
|
.name = "vcc_bb",
|
|
.min_uV = 2700000,
|
|
.max_uV = 3000000,
|
|
},
|
|
},
|
|
[vcc_pxa_flash] = {
|
|
.constraints = {/* default is 1.8V */
|
|
.name = "vcc_pxa_flash",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
[vcc_cc2420] = { /* also vcc_io */
|
|
.constraints = {
|
|
/* board default is 2.8V */
|
|
.name = "vcc_cc2420",
|
|
.min_uV = 2700000,
|
|
.max_uV = 3300000,
|
|
},
|
|
},
|
|
[vcc_vref] = { /* Reference for what? */
|
|
.constraints = { /* default 1.8V */
|
|
.name = "vcc_vref",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
[vcc_sram_ext] = {
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_sram_ext",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
},
|
|
},
|
|
[vcc_mica] = {
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_mica",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
},
|
|
},
|
|
[vcc_bt] = {
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_bt",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
},
|
|
},
|
|
[vcc_lcd] = {
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_lcd",
|
|
.min_uV = 2700000,
|
|
.max_uV = 3300000,
|
|
},
|
|
},
|
|
[vcc_io] = { /* Same or higher than everything
|
|
* bar vccbat and vccusb */
|
|
.constraints = { /* default 2.8V */
|
|
.name = "vcc_io",
|
|
.min_uV = 2692000,
|
|
.max_uV = 3300000,
|
|
},
|
|
},
|
|
[vcc_sensor_1_8] = {
|
|
.constraints = { /* default 1.8V */
|
|
.name = "vcc_sensor_1_8",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
[vcc_sensor_3] = { /* curiously default 2.8V */
|
|
.constraints = {
|
|
.name = "vcc_sensor_3",
|
|
.min_uV = 2800000,
|
|
.max_uV = 3000000,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con),
|
|
.consumer_supplies = stargate2_sensor_3_con,
|
|
},
|
|
[vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/
|
|
.constraints = {
|
|
.name = "vcc_pxa_pll",
|
|
.min_uV = 1170000,
|
|
.max_uV = 1430000,
|
|
},
|
|
},
|
|
[vcc_pxa_usim] = {
|
|
.constraints = { /* default 1.8V */
|
|
.name = "vcc_pxa_usim",
|
|
.min_uV = 1710000,
|
|
.max_uV = 2160000,
|
|
},
|
|
},
|
|
[vcc_pxa_mem] = {
|
|
.constraints = { /* default 1.8V */
|
|
.name = "vcc_pxa_mem",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct da903x_subdev_info stargate2_da9030_subdevs[] = {
|
|
{
|
|
.name = "da903x-led",
|
|
.id = DA9030_ID_LED_2,
|
|
.platform_data = &stargate2_leds[0],
|
|
}, {
|
|
.name = "da903x-led",
|
|
.id = DA9030_ID_LED_3,
|
|
.platform_data = &stargate2_leds[2],
|
|
}, {
|
|
.name = "da903x-led",
|
|
.id = DA9030_ID_LED_4,
|
|
.platform_data = &stargate2_leds[1],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO2,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_bbio],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO3,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_bb],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO4,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_pxa_flash],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO5,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_cc2420],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO6,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_vref],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO7,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_sram_ext],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO8,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_mica],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO9,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_bt],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO10,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO11,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_sensor_3],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO12,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_lcd],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO15,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_pxa_pll],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO17,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_pxa_usim],
|
|
}, {
|
|
.name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */
|
|
.id = DA9030_ID_LDO18,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_io],
|
|
}, {
|
|
.name = "da903x-regulator",
|
|
.id = DA9030_ID_LDO19,
|
|
.platform_data = &stargate2_ldo_init_data[vcc_pxa_mem],
|
|
},
|
|
};
|
|
|
|
static struct da903x_platform_data stargate2_da9030_pdata = {
|
|
.num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs),
|
|
.subdevs = stargate2_da9030_subdevs,
|
|
};
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.name = "smc91x-regs",
|
|
.start = (PXA_CS4_PHYS + 0x300),
|
|
.end = (PXA_CS4_PHYS + 0xfffff),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_GPIO(40),
|
|
.end = IRQ_GPIO(40),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
|
|
}
|
|
};
|
|
|
|
static struct smc91x_platdata stargate2_smc91x_info = {
|
|
.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT
|
|
| SMC91X_NOWAIT | SMC91X_USE_DMA,
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
.dev = {
|
|
.platform_data = &stargate2_smc91x_info,
|
|
},
|
|
};
|
|
|
|
|
|
|
|
static struct pxamci_platform_data stargate2_mci_platform_data;
|
|
|
|
/*
|
|
* The card detect interrupt isn't debounced so we delay it by 250ms
|
|
* to give the card a chance to fully insert / eject.
|
|
*/
|
|
static int stargate2_mci_init(struct device *dev,
|
|
irq_handler_t stargate2_detect_int,
|
|
void *data)
|
|
{
|
|
int err;
|
|
|
|
err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable");
|
|
if (err) {
|
|
printk(KERN_ERR "Can't get the gpio for SD power control");
|
|
goto return_err;
|
|
}
|
|
gpio_direction_output(SG2_SD_POWER_ENABLE, 0);
|
|
|
|
err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect");
|
|
if (err) {
|
|
printk(KERN_ERR "Can't get the sd detect gpio");
|
|
goto free_power_en;
|
|
}
|
|
gpio_direction_input(SG2_GPIO_nSD_DETECT);
|
|
/* Delay to allow for full insertion */
|
|
stargate2_mci_platform_data.detect_delay = msecs_to_jiffies(250);
|
|
|
|
err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
|
|
stargate2_detect_int,
|
|
IRQ_TYPE_EDGE_BOTH,
|
|
"MMC card detect",
|
|
data);
|
|
if (err) {
|
|
printk(KERN_ERR "can't request MMC card detect IRQ\n");
|
|
goto free_nsd_detect;
|
|
}
|
|
return 0;
|
|
|
|
free_nsd_detect:
|
|
gpio_free(SG2_GPIO_nSD_DETECT);
|
|
free_power_en:
|
|
gpio_free(SG2_SD_POWER_ENABLE);
|
|
return_err:
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* stargate2_mci_setpower() - set state of mmc power supply
|
|
*
|
|
* Very simple control. Either it is on or off and is controlled by
|
|
* a gpio pin */
|
|
static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd);
|
|
}
|
|
|
|
static void stargate2_mci_exit(struct device *dev, void *data)
|
|
{
|
|
free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
|
|
gpio_free(SG2_SD_POWER_ENABLE);
|
|
gpio_free(SG2_GPIO_nSD_DETECT);
|
|
}
|
|
|
|
static struct pxamci_platform_data stargate2_mci_platform_data = {
|
|
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
|
|
.init = stargate2_mci_init,
|
|
.setpower = stargate2_mci_setpower,
|
|
.exit = stargate2_mci_exit,
|
|
};
|
|
|
|
static struct mtd_partition stargate2flash_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = 0,
|
|
}, {
|
|
.name = "Kernel",
|
|
.size = 0x00200000,
|
|
.offset = 0x00040000,
|
|
.mask_flags = 0
|
|
}, {
|
|
.name = "Filesystem",
|
|
.size = 0x01DC0000,
|
|
.offset = 0x00240000,
|
|
.mask_flags = 0
|
|
},
|
|
};
|
|
|
|
static struct resource flash_resources = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_32M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct flash_platform_data stargate2_flash_data = {
|
|
.map_name = "cfi_probe",
|
|
.parts = stargate2flash_partitions,
|
|
.nr_parts = ARRAY_SIZE(stargate2flash_partitions),
|
|
.name = "PXA27xOnChipROM",
|
|
.width = 2,
|
|
};
|
|
|
|
static struct platform_device stargate2_flash_device = {
|
|
.name = "pxa2xx-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &stargate2_flash_data,
|
|
},
|
|
.resource = &flash_resources,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
/*
|
|
* SRAM - The Stargate 2 has 32MB of SRAM.
|
|
*
|
|
* Here it is made available as an MTD. This will then
|
|
* typically have a cifs filesystem created on it to provide
|
|
* fast temporary storage.
|
|
*/
|
|
static struct resource sram_resources = {
|
|
.start = PXA_CS1_PHYS,
|
|
.end = PXA_CS1_PHYS + SZ_32M-1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platdata_mtd_ram stargate2_sram_pdata = {
|
|
.mapname = "Stargate2 SRAM",
|
|
.bankwidth = 2,
|
|
};
|
|
|
|
static struct platform_device stargate2_sram = {
|
|
.name = "mtd-ram",
|
|
.id = 0,
|
|
.resource = &sram_resources,
|
|
.num_resources = 1,
|
|
.dev = {
|
|
.platform_data = &stargate2_sram_pdata,
|
|
},
|
|
};
|
|
|
|
static struct pcf857x_platform_data platform_data_pcf857x = {
|
|
.gpio_base = 128,
|
|
.n_latch = 0,
|
|
.setup = NULL,
|
|
.teardown = NULL,
|
|
.context = NULL,
|
|
};
|
|
|
|
static struct at24_platform_data pca9500_eeprom_pdata = {
|
|
.byte_len = 256,
|
|
.page_size = 4,
|
|
};
|
|
|
|
|
|
static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
|
|
/* Techically this a pca9500 - but it's compatible with the 8574
|
|
* for gpio expansion and the 24c02 for eeprom access.
|
|
*/
|
|
{
|
|
.type = "pcf8574",
|
|
.addr = 0x27,
|
|
.platform_data = &platform_data_pcf857x,
|
|
}, {
|
|
.type = "24c02",
|
|
.addr = 0x57,
|
|
.platform_data = &pca9500_eeprom_pdata,
|
|
}, {
|
|
.type = "max1238",
|
|
.addr = 0x35,
|
|
}, { /* ITS400 Sensor board only */
|
|
.type = "max1363",
|
|
.addr = 0x34,
|
|
/* Through a nand gate - Also beware, on V2 sensor board the
|
|
* pull up resistors are missing.
|
|
*/
|
|
.irq = IRQ_GPIO(99),
|
|
}, { /* ITS400 Sensor board only */
|
|
.type = "tsl2561",
|
|
.addr = 0x49,
|
|
/* Through a nand gate - Also beware, on V2 sensor board the
|
|
* pull up resistors are missing.
|
|
*/
|
|
.irq = IRQ_GPIO(99),
|
|
}, { /* ITS400 Sensor board only */
|
|
.type = "tmp175",
|
|
.addr = 0x4A,
|
|
.irq = IRQ_GPIO(96),
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
|
|
{
|
|
.type = "da9030",
|
|
.addr = 0x49,
|
|
.platform_data = &stargate2_da9030_pdata,
|
|
.irq = gpio_to_irq(1),
|
|
},
|
|
};
|
|
|
|
static struct pxa2xx_spi_master pxa_ssp_master_0_info = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct pxa2xx_spi_master pxa_ssp_master_1_info = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct pxa2xx_spi_master pxa_ssp_master_2_info = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
/* An upcoming kernel change will scrap SFRM usage so these
|
|
* drivers have been moved to use gpio's via cs_control */
|
|
static struct pxa2xx_spi_chip staccel_chip_info = {
|
|
.tx_threshold = 8,
|
|
.rx_threshold = 8,
|
|
.dma_burst_size = 8,
|
|
.timeout = 235,
|
|
.gpio_cs = 24,
|
|
};
|
|
|
|
static struct pxa2xx_spi_chip cc2420_info = {
|
|
.tx_threshold = 8,
|
|
.rx_threshold = 8,
|
|
.dma_burst_size = 8,
|
|
.timeout = 235,
|
|
.gpio_cs = 39,
|
|
};
|
|
|
|
static struct spi_board_info spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "lis3l02dq",
|
|
.max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */
|
|
.bus_num = 1,
|
|
.chip_select = 0,
|
|
.controller_data = &staccel_chip_info,
|
|
.irq = IRQ_GPIO(96),
|
|
}, {
|
|
.modalias = "cc2420",
|
|
.max_speed_hz = 6500000,
|
|
.bus_num = 3,
|
|
.chip_select = 0,
|
|
.controller_data = &cc2420_info,
|
|
},
|
|
};
|
|
|
|
static void sg2_udc_command(int cmd)
|
|
{
|
|
switch (cmd) {
|
|
case PXA2XX_UDC_CMD_CONNECT:
|
|
UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE;
|
|
break;
|
|
case PXA2XX_UDC_CMD_DISCONNECT:
|
|
UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Board doesn't support cable detection - so always lie and say
|
|
* something is there.
|
|
*/
|
|
static int sg2_udc_detect(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = {
|
|
.udc_is_connected = sg2_udc_detect,
|
|
.udc_command = sg2_udc_command,
|
|
};
|
|
|
|
static struct platform_device *stargate2_devices[] = {
|
|
&stargate2_flash_device,
|
|
&stargate2_sram,
|
|
&smc91x_device,
|
|
&sht15,
|
|
};
|
|
|
|
static struct i2c_pxa_platform_data i2c_pwr_pdata = {
|
|
.fast_mode = 1,
|
|
};
|
|
|
|
static struct i2c_pxa_platform_data i2c_pdata = {
|
|
.fast_mode = 1,
|
|
};
|
|
|
|
static void __init stargate2_init(void)
|
|
{
|
|
/* This is probably a board specific hack as this must be set
|
|
prior to connecting the MFP stuff up. */
|
|
MECR &= ~MECR_NOS;
|
|
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
|
|
/* spi chip selects */
|
|
gpio_direction_output(37, 0);
|
|
gpio_direction_output(24, 0);
|
|
gpio_direction_output(39, 0);
|
|
|
|
platform_add_devices(ARRAY_AND_SIZE(stargate2_devices));
|
|
|
|
pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info);
|
|
pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info);
|
|
pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info);
|
|
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
|
|
|
|
i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info));
|
|
i2c_register_board_info(1,
|
|
ARRAY_AND_SIZE(stargate2_pwr_i2c_board_info));
|
|
pxa27x_set_i2c_power_info(&i2c_pwr_pdata);
|
|
pxa_set_i2c_info(&i2c_pdata);
|
|
|
|
pxa_set_mci_info(&stargate2_mci_platform_data);
|
|
|
|
pxa_set_udc_info(&stargate2_udc_info);
|
|
|
|
stargate2_reset_bluetooth();
|
|
}
|
|
|
|
MACHINE_START(STARGATE2, "Stargate 2")
|
|
.phys_io = 0x40000000,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa27x_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = stargate2_init,
|
|
.boot_params = 0xA0000100,
|
|
MACHINE_END
|