..
board-2430sdp.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
board-3430sdp.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
board-4430sdp.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
board-apollon.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
board-generic.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
board-h4.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
board-ldp.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
board-omap3beagle.c
OMAP3: Setup MUX settings for SDRC CKE signals
2009-07-24 19:43:25 -06:00
board-omap3evm.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
board-omap3pandora.c
OMAP3: Setup MUX settings for SDRC CKE signals
2009-07-24 19:43:25 -06:00
board-overo.c
OMAP3: Setup MUX settings for SDRC CKE signals
2009-07-24 19:43:25 -06:00
board-rx51-peripherals.c
OMAP3: RX51: Use OneNAND sync read / write
2009-06-23 13:30:25 +03:00
board-rx51.c
OMAP3: Setup MUX settings for SDRC CKE signals
2009-07-24 19:43:25 -06:00
board-zoom-debugboard.c
ARM: OMAP3: Add support for OMAP3 Zoom2 board
2009-05-28 14:04:04 -07:00
board-zoom2.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
clock.c
OMAP2/3 clock: split, rename omap2_wait_clock_ready()
2009-07-24 20:10:35 -06:00
clock.h
OMAP2/3 clock: split, rename omap2_wait_clock_ready()
2009-07-24 20:10:35 -06:00
clock24xx.c
OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register
2009-07-24 20:10:36 -06:00
clock24xx.h
OMAP2 clock: 2430 I2CHS uses non-standard CM_IDLEST register
2009-07-24 20:10:36 -06:00
clock34xx.c
OMAP3 clock: correct module IDLEST bits: SSI; DSS; USBHOST; HSOTGUSB
2009-07-24 20:10:36 -06:00
clock34xx.h
OMAP3 clock: correct module IDLEST bits: SSI; DSS; USBHOST; HSOTGUSB
2009-07-24 20:10:36 -06:00
clockdomain.c
[ARM] omap: ensure that failing power domain lookups produce errors
2009-02-23 14:55:34 +00:00
clockdomains.h
OMAP3: PM: D2D clockdomain supports SW supervised transitions
2009-05-28 10:59:08 -07:00
cm-regbits-24xx.h
[ARM] OMAP2 PRCM: clean up CM_IDLEST bits
2009-02-08 17:50:37 +00:00
cm-regbits-34xx.h
OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init
2009-05-28 10:59:07 -07:00
cm.h
ARM: OMAP2/3: Remove OMAP_CM_REGADDR
2009-05-25 11:26:46 -07:00
control.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
devices.c
ARM: OMAP2: Fix SPI driver failure on 2420 when running multi-omap config
2009-05-12 11:20:30 -07:00
gpmc-onenand.c
OMAP2/3: gpmc-onenand: correct use of async timings
2009-06-23 13:30:24 +03:00
gpmc-smc91x.c
ARM: OMAP2/3: Add generic smc91x support when connected to GPMC
2009-05-28 13:23:52 -07:00
gpmc.c
ARM: OMAP4: Add minimal support for omap4
2009-05-28 14:16:04 -07:00
id.c
OMAP2/3: Add omap_type() for determining GP/EMU/HS
2009-06-23 13:30:23 +03:00
io.c
OMAP3 SDRC: add support for 2 SDRAM chip selects
2009-07-24 19:43:25 -06:00
iommu2.c
omap iommu: omap2 architecture specific functions
2009-05-05 14:52:39 +03:00
irq.c
OMAP: Add new function to check wether there is irq pending
2009-05-28 10:59:04 -07:00
Kconfig
ARM: OMAP4: Add support for 4430 SDP
2009-05-28 14:16:05 -07:00
mailbox.c
OMAP2/3: omap mailbox: platform_get_irq() error ignored
2009-06-23 13:30:22 +03:00
Makefile
ARM: OMAP4: SMP: Enable SMP support for OMAP4430
2009-06-09 13:04:06 +05:30
Makefile.boot
[ARM] 3145/1: OMAP 3a/5: Add support for omap24xx
2005-11-10 14:26:51 +00:00
mcbsp.c
[ARM] omap: mcbsp: convert to use fck/ick clocks directly
2009-02-08 17:50:19 +00:00
mmc-twl4030.c
OMAP2/3: mmc-twl4030: use correct controller in twl_mmc23_set_power
2009-06-23 13:30:22 +03:00
mmc-twl4030.h
ARM: OMAP3: mmc-twl4030 uses regulator framework
2009-05-28 14:04:03 -07:00
mux.c
OMAP3: Setup MUX settings for SDRC CKE signals
2009-07-24 19:43:25 -06:00
omap-headsmp.S
ARM: OMAP4: SMP: Add OMAP4430 SMP board files
2009-06-09 13:03:50 +05:30
omap-smp.c
ARM: OMAP4: SMP: Add OMAP4430 SMP board files
2009-06-09 13:03:50 +05:30
omap3-iommu.c
omap iommu: add MPU_BRIDGE_IOMMU for tidspbridge migration
2009-05-22 10:17:02 +03:00
pm-debug.c
OMAP2/3: PM: push core PM code from linux-omap
2009-05-28 10:58:50 -07:00
pm.h
OMAP2/3: PM: push core PM code from linux-omap
2009-05-28 10:58:50 -07:00
pm24xx.c
OMAP3: PM: UART: disable clocks when idle and off-mode support
2009-05-28 10:59:06 -07:00
pm34xx.c
OMAP3: PM: prevent module wakeups from waking IVA2
2009-05-28 10:59:10 -07:00
powerdomain.c
OMAP2 clock/powerdomain: off by 1 error in loop timeout comparisons
2009-06-19 19:09:32 -06:00
powerdomains.h
[ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond
2009-02-23 14:52:51 +00:00
powerdomains24xx.h
ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains
2008-08-19 11:08:42 +03:00
powerdomains34xx.h
[ARM] OMAP3 powerdomains: make USBTLL SAR only available on ES3.1 and beyond
2009-02-23 14:52:51 +00:00
prcm-common.h
OMAP2/3: PM: push core PM code from linux-omap
2009-05-28 10:58:50 -07:00
prcm.c
OMAP2/3 clock: split, rename omap2_wait_clock_ready()
2009-07-24 20:10:35 -06:00
prm-regbits-24xx.h
ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains
2008-08-19 11:08:42 +03:00
prm-regbits-34xx.h
ARM: OMAP3: Fix HW SAVEANDRESTORE shift define
2009-05-16 08:28:17 -07:00
prm.h
OMAP3: PM: prevent module wakeups from waking IVA2
2009-05-28 10:59:10 -07:00
sdram-micron-mt46h32m32lf-6.h
ARM: OMAP3: SDRC: add timing data for Micron MT46H32M32LF-6, v2
2009-05-28 14:03:59 -07:00
sdram-qimonda-hyb18m512160af-6.h
ARM: OMAP3: SDRC: add timing data for Qimonda HYB18M512160AF-6
2009-05-28 14:03:59 -07:00
sdrc.c
OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on boot
2009-07-24 19:44:01 -06:00
sdrc.h
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
sdrc2xxx.c
ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE
2009-05-25 11:26:42 -07:00
serial.c
Merge branch 'omap4' into for-next
2009-05-28 15:45:14 -07:00
sleep24xx.S
OMAP2/3: PM: push core PM code from linux-omap
2009-05-28 10:58:50 -07:00
sleep34xx.S
OMAP2/3: PM: push core PM code from linux-omap
2009-05-28 10:58:50 -07:00
sram34xx.S
OMAP3 SDRC: Move the clk stabilization delay to the right place
2009-07-24 20:10:35 -06:00
sram242x.S
ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE
2009-05-25 11:26:42 -07:00
sram243x.S
ARM: OMAP2/3: Remove OMAP_PRM_REGADDR and OMAP2_PRM_BASE
2009-05-25 11:26:42 -07:00
timer-gp.c
ARM: OMAP4: SMP: Add mpu timer support for OMAP4430
2009-06-09 13:03:59 +05:30
timer-mpu.c
ARM: OMAP4: SMP: Add mpu timer support for OMAP4430
2009-06-09 13:03:59 +05:30
usb-musb.c
OMAP3: PM: Ensure MUSB block can idle when driver not loaded
2009-05-28 10:59:09 -07:00
usb-tusb6010.c
ARM: OMAP2: Fix tusb6010 init error and compilation warning
2009-05-12 11:20:02 -07:00