c907d3b09f
Correctly initialize the on-chip EHCI controller on the AMCC PPC440EPx. Fix "USB 0.0" initialization message, and properly put the controller into a known state before starting it. Add "FIXME" comment to the au1xxx bus glue which is doing the same wrong thing here. (Who maintains that, now that AMD sold off Alchemy?) Remove some false copyright attributions which were somehow placed in the au1xxx bus glue then copied into ppc-soc. Signed-off-by: Mike Nuss <mike@terascala.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: K.Boge <karsten.boge@amd.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
200 lines
4.7 KiB
C
200 lines
4.7 KiB
C
/*
|
|
* EHCI HCD (Host Controller Driver) for USB.
|
|
*
|
|
* (C) Copyright 2006-2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
|
|
*
|
|
* Bus Glue for PPC On-Chip EHCI driver
|
|
* Tested on AMCC 440EPx
|
|
*
|
|
* Based on "ehci-au1xxx.c" by K.Boge <karsten.boge@amd.com>
|
|
*
|
|
* This file is licenced under the GPL.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
extern int usb_disabled(void);
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int ehci_ppc_soc_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
int retval;
|
|
|
|
retval = ehci_halt(ehci);
|
|
if (retval)
|
|
return retval;
|
|
|
|
retval = ehci_init(hcd);
|
|
if (retval)
|
|
return retval;
|
|
|
|
ehci->sbrn = 0x20;
|
|
return ehci_reset(ehci);
|
|
}
|
|
|
|
/**
|
|
* usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Allocates basic resources for this USB host controller, and
|
|
* then invokes the start() method for the HCD associated with it
|
|
* through the hotplug entry's driver_data.
|
|
*
|
|
*/
|
|
int usb_ehci_ppc_soc_probe(const struct hc_driver *driver,
|
|
struct usb_hcd **hcd_out,
|
|
struct platform_device *dev)
|
|
{
|
|
int retval;
|
|
struct usb_hcd *hcd;
|
|
struct ehci_hcd *ehci;
|
|
|
|
if (dev->resource[1].flags != IORESOURCE_IRQ) {
|
|
pr_debug("resource[1] is not IORESOURCE_IRQ");
|
|
retval = -ENOMEM;
|
|
}
|
|
hcd = usb_create_hcd(driver, &dev->dev, "PPC-SOC EHCI");
|
|
if (!hcd)
|
|
return -ENOMEM;
|
|
hcd->rsrc_start = dev->resource[0].start;
|
|
hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
|
|
|
|
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
|
|
pr_debug("request_mem_region failed");
|
|
retval = -EBUSY;
|
|
goto err1;
|
|
}
|
|
|
|
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
|
|
if (!hcd->regs) {
|
|
pr_debug("ioremap failed");
|
|
retval = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
|
|
ehci = hcd_to_ehci(hcd);
|
|
ehci->big_endian_mmio = 1;
|
|
ehci->big_endian_desc = 1;
|
|
ehci->caps = hcd->regs;
|
|
ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
|
|
|
|
/* cache this readonly data; minimize chip reads */
|
|
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
|
|
|
|
#if defined(CONFIG_440EPX)
|
|
/*
|
|
* 440EPx Errata USBH_3
|
|
* Fix: Enable Break Memory Transfer (BMT) in INSNREG3
|
|
*/
|
|
out_be32((void *)((ulong)(&ehci->regs->command) + 0x8c), (1 << 0));
|
|
ehci_dbg(ehci, "Break Memory Transfer (BMT) has beed enabled!\n");
|
|
#endif
|
|
|
|
retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
|
|
if (retval == 0)
|
|
return retval;
|
|
|
|
iounmap(hcd->regs);
|
|
err2:
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
err1:
|
|
usb_put_hcd(hcd);
|
|
return retval;
|
|
}
|
|
|
|
/* may be called without controller electrically present */
|
|
/* may be called with controller, bus, and devices active */
|
|
|
|
/**
|
|
* usb_ehci_hcd_ppc_soc_remove - shutdown processing for PPC-SoC-based HCDs
|
|
* @dev: USB Host Controller being removed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Reverses the effect of usb_ehci_hcd_ppc_soc_probe(), first invoking
|
|
* the HCD's stop() method. It is always called from a thread
|
|
* context, normally "rmmod", "apmd", or something similar.
|
|
*
|
|
*/
|
|
void usb_ehci_ppc_soc_remove(struct usb_hcd *hcd, struct platform_device *dev)
|
|
{
|
|
usb_remove_hcd(hcd);
|
|
iounmap(hcd->regs);
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
usb_put_hcd(hcd);
|
|
}
|
|
|
|
static const struct hc_driver ehci_ppc_soc_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "PPC-SOC EHCI",
|
|
.hcd_priv_size = sizeof(struct ehci_hcd),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
.irq = ehci_irq,
|
|
.flags = HCD_MEMORY | HCD_USB2,
|
|
|
|
/*
|
|
* basic lifecycle operations
|
|
*/
|
|
.reset = ehci_ppc_soc_setup,
|
|
.start = ehci_run,
|
|
.stop = ehci_stop,
|
|
.shutdown = ehci_shutdown,
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = ehci_urb_enqueue,
|
|
.urb_dequeue = ehci_urb_dequeue,
|
|
.endpoint_disable = ehci_endpoint_disable,
|
|
|
|
/*
|
|
* scheduling support
|
|
*/
|
|
.get_frame_number = ehci_get_frame,
|
|
|
|
/*
|
|
* root hub support
|
|
*/
|
|
.hub_status_data = ehci_hub_status_data,
|
|
.hub_control = ehci_hub_control,
|
|
#ifdef CONFIG_PM
|
|
.hub_suspend = ehci_hub_suspend,
|
|
.hub_resume = ehci_hub_resume,
|
|
#endif
|
|
};
|
|
|
|
static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = NULL;
|
|
int ret;
|
|
|
|
pr_debug("In ehci_hcd_ppc_soc_drv_probe\n");
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
ret = usb_ehci_ppc_soc_probe(&ehci_ppc_soc_hc_driver, &hcd, pdev);
|
|
return ret;
|
|
}
|
|
|
|
static int ehci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
usb_ehci_ppc_soc_remove(hcd, pdev);
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("ppc-soc-ehci");
|
|
static struct platform_driver ehci_ppc_soc_driver = {
|
|
.probe = ehci_hcd_ppc_soc_drv_probe,
|
|
.remove = ehci_hcd_ppc_soc_drv_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "ppc-soc-ehci",
|
|
.bus = &platform_bus_type
|
|
}
|
|
};
|