android_kernel_motorola_sm6225/include/asm-arm/arch-pxa
eric miao fe69af002e [MTD] [NAND] support for pxa3xx
This is preliminary since:

1. It supports only _one_ chip select at the moment. As there is no
   existing platforms available using two chip selects of the NAND
   controller, it shall really not include code for supporting the
   2nd chip select for now, as such code cannot be verified.

2. It resorts to the default and simpliest memory based badblock
   table

3. Only limited types of nand flash are currently supported. Most
   PXA3xx processors come with on-chip NAND flash dies, so there
   isn't much flexibility for other types of NAND.

4. The NAND controller should be configured to detect the device's
   ID, thus making it difficult to use nand_scan_ident() to assist
   the detection process (though it's not impossible)

TODO: fix all the above limitations of cuz :-)

Signed-off-by: eric miao <eric.miao@marvell.com>
Cc: Sergey Podstavin <spodstavin@ru.mvista.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-04-22 19:27:27 +01:00
..
akita.h [ARM] 3149/1: SharpSL: Add Akita (SL-C1000) machine support 2005-11-12 18:53:48 +00:00
audio.h [ALSA] Remove sound/driver.h 2008-01-31 17:29:48 +01:00
bitfield.h Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
camera.h [ARM] pxa: V4L2 soc_camera driver for PXA270 2008-04-19 17:14:30 +01:00
cm-x270.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
colibri.h [ARM] 4762/1: Basic support for Toradex Colibri module 2008-01-28 13:13:27 +00:00
corgi.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
debug-macro.S [ARM] Collect 8250-based debug implementations together 2006-03-21 22:05:57 +00:00
dma.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
entry-macro.S [ARM] 4840/1: pxa: fix the typo in get_irqnr_and_base 2008-02-29 22:47:23 +00:00
gpio.h gpiolib support for the PXA architecture 2008-02-05 09:44:13 -08:00
gumstix.h [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
hardware.h [ARM] pxa: silence warnings from cpu_is_xxx() macros 2008-01-10 12:33:54 +00:00
i2c.h i2c-pxa: Add polling transfer 2008-01-27 18:14:50 +01:00
idp.h Don't include linux/config.h from anywhere else in include/ 2006-04-26 12:56:16 +01:00
io.h [ARM] 3631/1: Remove legacy __mem_isa() definitions 2006-06-24 10:34:48 +01:00
irda.h [ARM] 4971/1: pxaficp_ir: provide startup and shutdown hooks 2008-04-19 11:29:08 +01:00
irqs.h [ARM] 4948/1: magician: use htc-egpio to drive the GPIO/IRQ expander CPLD 2008-04-19 11:29:07 +01:00
littleton.h [ARM] pxa: add basic support for Littleton (PXA3xx Form Factor Platform) 2008-01-28 13:13:17 +00:00
lpd270.h [ARM] 3417/1: add support for logicpd pxa270 card engine 2006-03-28 21:08:13 +01:00
lubbock.h Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
magician.h [ARM] 4952/1: magician: add LCD detection, LCD power switching, update pxafb settings 2008-04-19 11:29:07 +01:00
mainstone.h Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
memory.h [ARM] 4576/1: CM-X270 machine support 2007-10-15 18:53:57 +01:00
mfp-pxa2xx.h [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
mfp-pxa3xx.h [ARM] pxa: make MFP configuration processor independent 2008-01-26 15:07:56 +00:00
mfp-pxa25x.h [ARM] pxa: add MFP-alike pin configuration support for pxa{25x, 27x} 2008-04-19 11:29:04 +01:00
mfp-pxa27x.h [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
mfp-pxa300.h [ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations 2008-01-26 15:07:56 +00:00
mfp-pxa320.h [ARM] pxa: introduce a new file mfp-pxa3xx.h for common pin configurations 2008-01-26 15:07:56 +00:00
mfp.h [ARM] pxa: make MFP configuration processor independent 2008-01-26 15:07:56 +00:00
mmc.h [ARM] pxa: mmc: add 3rd host controller support for pxa310 2008-01-26 15:07:53 +00:00
mtd-xip.h [MTD] XIP cleanup 2005-07-07 16:50:16 +02:00
ohci.h [ARM] 3547/1: PXA-OHCI: Allow platforms to specify a power budget 2006-06-08 22:44:07 +01:00
pcm027.h [ARM] 4744/1: pcm027: add support for phyCORE-PXA270 CPU module 2008-01-28 13:13:20 +00:00
pcm990_baseboard.h [ARM] 4747/1: pcm027: support for pcm990 baseboard for phyCORE-PXA270 2008-01-28 13:13:24 +00:00
pm.h PM: Move definition of struct pm_ops to suspend.h 2007-10-18 14:37:18 -07:00
poodle.h [ARM] 3594/1: Poodle: Add touchscreen support + other updates 2006-06-19 20:46:05 +01:00
pxa-regs.h [ARM] 4959/1: PXA: Fix misprint in CICR1_RGBT_CONV 2008-04-19 11:29:07 +01:00
pxa2xx-gpio.h [ARM] pxa: V4L2 soc_camera driver for PXA270 2008-04-19 17:14:30 +01:00
pxa2xx-regs.h [ARM] pxa: move memory controller registers into pxa2xx-regs.h 2008-01-26 15:07:54 +00:00
pxa2xx_spi.h [ARM] pxa: make pxa2xx_spi driver use ssp_request()/ssp_free() 2008-01-26 15:07:52 +00:00
pxa3xx-regs.h [ARM] 4830/1: Add support for the CLK_POUT pin on PXA3xx CPUs 2008-04-19 11:29:02 +01:00
pxa3xx_nand.h [MTD] [NAND] support for pxa3xx 2008-04-22 19:27:27 +01:00
pxa27x_keypad.h [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
pxafb.h pxafb: Add support for other palette formats 2007-10-16 09:43:15 -07:00
regs-ssp.h spi: pxa2xx_spi clock polarity fix 2008-02-23 17:12:14 -08:00
sharpsl.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
spitz.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
ssp.h [ARM] pxa: define "struct ssp_device" and add ssp_request()/ssp_free() 2008-01-26 15:07:51 +00:00
system.h [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handhelds 2006-06-19 19:57:12 +01:00
timex.h [ARM] pxa: PXA3xx base support 2007-10-15 18:53:43 +01:00
tosa.h [ARM] 5002/1: tosa: add two more leds 2008-04-19 11:29:09 +01:00
trizeps4.h [ARM] 3666/1: TRIZEPS4 [1/5] core 2006-06-29 16:25:37 +01:00
udc.h USB: pxa2xx_udc: use generic gpio layer 2007-07-12 16:34:42 -07:00
uncompress.h [ARM] 4718/1: Fix redefinition warnings in PXA uncompressor code 2008-01-26 15:07:52 +00:00
vmalloc.h [PATCH] ARM: cleanup vmalloc start/offset macros 2005-05-03 12:20:29 +01:00
zylonite.h [ARM] 4976/1: zylonite: Configure GPIO for WM9713 IRQ line 2008-04-19 11:29:09 +01:00