3f40d7d6ea
There's a slight problem in the way you've done the transport parameters; reading from the variables actually produces the current settings, not the ones you just set (and there's usually a lag because devices don't renegotiate until the next command goes over the bus). If you set the bit immediately, you get into the situation where the transport parameters report something as being set even if the drive cannot support it. I patched the driver to do it this way and also corrected a panic in the proc routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
354 lines
9.6 KiB
C
354 lines
9.6 KiB
C
/*
|
|
* Copyright (c) 2000-2001 Adaptec Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
* 3. Neither the names of the above-listed copyright holders nor the names
|
|
* of any contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*
|
|
* String handling code courtesy of Gerard Roudier's <groudier@club-internet.fr>
|
|
* sym driver.
|
|
*
|
|
* $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic79xx_proc.c#19 $
|
|
*/
|
|
#include "aic79xx_osm.h"
|
|
#include "aic79xx_inline.h"
|
|
|
|
static void copy_mem_info(struct info_str *info, char *data, int len);
|
|
static int copy_info(struct info_str *info, char *fmt, ...);
|
|
static void ahd_dump_target_state(struct ahd_softc *ahd,
|
|
struct info_str *info,
|
|
u_int our_id, char channel,
|
|
u_int target_id, u_int target_offset);
|
|
static void ahd_dump_device_state(struct info_str *info,
|
|
struct scsi_device *sdev);
|
|
static int ahd_proc_write_seeprom(struct ahd_softc *ahd,
|
|
char *buffer, int length);
|
|
|
|
static void
|
|
copy_mem_info(struct info_str *info, char *data, int len)
|
|
{
|
|
if (info->pos + len > info->offset + info->length)
|
|
len = info->offset + info->length - info->pos;
|
|
|
|
if (info->pos + len < info->offset) {
|
|
info->pos += len;
|
|
return;
|
|
}
|
|
|
|
if (info->pos < info->offset) {
|
|
off_t partial;
|
|
|
|
partial = info->offset - info->pos;
|
|
data += partial;
|
|
info->pos += partial;
|
|
len -= partial;
|
|
}
|
|
|
|
if (len > 0) {
|
|
memcpy(info->buffer, data, len);
|
|
info->pos += len;
|
|
info->buffer += len;
|
|
}
|
|
}
|
|
|
|
static int
|
|
copy_info(struct info_str *info, char *fmt, ...)
|
|
{
|
|
va_list args;
|
|
char buf[256];
|
|
int len;
|
|
|
|
va_start(args, fmt);
|
|
len = vsprintf(buf, fmt, args);
|
|
va_end(args);
|
|
|
|
copy_mem_info(info, buf, len);
|
|
return (len);
|
|
}
|
|
|
|
void
|
|
ahd_format_transinfo(struct info_str *info, struct ahd_transinfo *tinfo)
|
|
{
|
|
u_int speed;
|
|
u_int freq;
|
|
u_int mb;
|
|
|
|
if (tinfo->period == AHD_PERIOD_UNKNOWN) {
|
|
copy_info(info, "Renegotiation Pending\n");
|
|
return;
|
|
}
|
|
speed = 3300;
|
|
freq = 0;
|
|
if (tinfo->offset != 0) {
|
|
freq = aic_calc_syncsrate(tinfo->period);
|
|
speed = freq;
|
|
}
|
|
speed *= (0x01 << tinfo->width);
|
|
mb = speed / 1000;
|
|
if (mb > 0)
|
|
copy_info(info, "%d.%03dMB/s transfers", mb, speed % 1000);
|
|
else
|
|
copy_info(info, "%dKB/s transfers", speed);
|
|
|
|
if (freq != 0) {
|
|
int printed_options;
|
|
|
|
printed_options = 0;
|
|
copy_info(info, " (%d.%03dMHz", freq / 1000, freq % 1000);
|
|
if ((tinfo->ppr_options & MSG_EXT_PPR_RD_STRM) != 0) {
|
|
copy_info(info, " RDSTRM");
|
|
printed_options++;
|
|
}
|
|
if ((tinfo->ppr_options & MSG_EXT_PPR_DT_REQ) != 0) {
|
|
copy_info(info, "%s", printed_options ? "|DT" : " DT");
|
|
printed_options++;
|
|
}
|
|
if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
|
|
copy_info(info, "%s", printed_options ? "|IU" : " IU");
|
|
printed_options++;
|
|
}
|
|
if ((tinfo->ppr_options & MSG_EXT_PPR_RTI) != 0) {
|
|
copy_info(info, "%s",
|
|
printed_options ? "|RTI" : " RTI");
|
|
printed_options++;
|
|
}
|
|
if ((tinfo->ppr_options & MSG_EXT_PPR_QAS_REQ) != 0) {
|
|
copy_info(info, "%s",
|
|
printed_options ? "|QAS" : " QAS");
|
|
printed_options++;
|
|
}
|
|
}
|
|
|
|
if (tinfo->width > 0) {
|
|
if (freq != 0) {
|
|
copy_info(info, ", ");
|
|
} else {
|
|
copy_info(info, " (");
|
|
}
|
|
copy_info(info, "%dbit)", 8 * (0x01 << tinfo->width));
|
|
} else if (freq != 0) {
|
|
copy_info(info, ")");
|
|
}
|
|
copy_info(info, "\n");
|
|
}
|
|
|
|
static void
|
|
ahd_dump_target_state(struct ahd_softc *ahd, struct info_str *info,
|
|
u_int our_id, char channel, u_int target_id,
|
|
u_int target_offset)
|
|
{
|
|
struct ahd_linux_target *targ;
|
|
struct scsi_target *starget;
|
|
struct ahd_initiator_tinfo *tinfo;
|
|
struct ahd_tmode_tstate *tstate;
|
|
int lun;
|
|
|
|
tinfo = ahd_fetch_transinfo(ahd, channel, our_id,
|
|
target_id, &tstate);
|
|
copy_info(info, "Target %d Negotiation Settings\n", target_id);
|
|
copy_info(info, "\tUser: ");
|
|
ahd_format_transinfo(info, &tinfo->user);
|
|
starget = ahd->platform_data->starget[target_offset];
|
|
if (starget == NULL)
|
|
return;
|
|
targ = scsi_transport_target_data(starget);
|
|
|
|
copy_info(info, "\tGoal: ");
|
|
ahd_format_transinfo(info, &tinfo->goal);
|
|
copy_info(info, "\tCurr: ");
|
|
ahd_format_transinfo(info, &tinfo->curr);
|
|
|
|
for (lun = 0; lun < AHD_NUM_LUNS; lun++) {
|
|
struct scsi_device *dev;
|
|
|
|
dev = targ->sdev[lun];
|
|
|
|
if (dev == NULL)
|
|
continue;
|
|
|
|
ahd_dump_device_state(info, dev);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ahd_dump_device_state(struct info_str *info, struct scsi_device *sdev)
|
|
{
|
|
struct ahd_linux_device *dev = scsi_transport_device_data(sdev);
|
|
|
|
copy_info(info, "\tChannel %c Target %d Lun %d Settings\n",
|
|
sdev->sdev_target->channel + 'A',
|
|
sdev->sdev_target->id, sdev->lun);
|
|
|
|
copy_info(info, "\t\tCommands Queued %ld\n", dev->commands_issued);
|
|
copy_info(info, "\t\tCommands Active %d\n", dev->active);
|
|
copy_info(info, "\t\tCommand Openings %d\n", dev->openings);
|
|
copy_info(info, "\t\tMax Tagged Openings %d\n", dev->maxtags);
|
|
copy_info(info, "\t\tDevice Queue Frozen Count %d\n", dev->qfrozen);
|
|
}
|
|
|
|
static int
|
|
ahd_proc_write_seeprom(struct ahd_softc *ahd, char *buffer, int length)
|
|
{
|
|
ahd_mode_state saved_modes;
|
|
int have_seeprom;
|
|
u_long s;
|
|
int paused;
|
|
int written;
|
|
|
|
/* Default to failure. */
|
|
written = -EINVAL;
|
|
ahd_lock(ahd, &s);
|
|
paused = ahd_is_paused(ahd);
|
|
if (!paused)
|
|
ahd_pause(ahd);
|
|
|
|
saved_modes = ahd_save_modes(ahd);
|
|
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
|
|
if (length != sizeof(struct seeprom_config)) {
|
|
printf("ahd_proc_write_seeprom: incorrect buffer size\n");
|
|
goto done;
|
|
}
|
|
|
|
have_seeprom = ahd_verify_cksum((struct seeprom_config*)buffer);
|
|
if (have_seeprom == 0) {
|
|
printf("ahd_proc_write_seeprom: cksum verification failed\n");
|
|
goto done;
|
|
}
|
|
|
|
have_seeprom = ahd_acquire_seeprom(ahd);
|
|
if (!have_seeprom) {
|
|
printf("ahd_proc_write_seeprom: No Serial EEPROM\n");
|
|
goto done;
|
|
} else {
|
|
u_int start_addr;
|
|
|
|
if (ahd->seep_config == NULL) {
|
|
ahd->seep_config = malloc(sizeof(*ahd->seep_config),
|
|
M_DEVBUF, M_NOWAIT);
|
|
if (ahd->seep_config == NULL) {
|
|
printf("aic79xx: Unable to allocate serial "
|
|
"eeprom buffer. Write failing\n");
|
|
goto done;
|
|
}
|
|
}
|
|
printf("aic79xx: Writing Serial EEPROM\n");
|
|
start_addr = 32 * (ahd->channel - 'A');
|
|
ahd_write_seeprom(ahd, (u_int16_t *)buffer, start_addr,
|
|
sizeof(struct seeprom_config)/2);
|
|
ahd_read_seeprom(ahd, (uint16_t *)ahd->seep_config,
|
|
start_addr, sizeof(struct seeprom_config)/2,
|
|
/*ByteStream*/FALSE);
|
|
ahd_release_seeprom(ahd);
|
|
written = length;
|
|
}
|
|
|
|
done:
|
|
ahd_restore_modes(ahd, saved_modes);
|
|
if (!paused)
|
|
ahd_unpause(ahd);
|
|
ahd_unlock(ahd, &s);
|
|
return (written);
|
|
}
|
|
/*
|
|
* Return information to handle /proc support for the driver.
|
|
*/
|
|
int
|
|
ahd_linux_proc_info(struct Scsi_Host *shost, char *buffer, char **start,
|
|
off_t offset, int length, int inout)
|
|
{
|
|
struct ahd_softc *ahd;
|
|
struct info_str info;
|
|
char ahd_info[256];
|
|
u_long l;
|
|
u_int max_targ;
|
|
u_int i;
|
|
int retval;
|
|
|
|
retval = -EINVAL;
|
|
ahd_list_lock(&l);
|
|
ahd = ahd_find_softc(*(struct ahd_softc **)shost->hostdata);
|
|
|
|
if (ahd == NULL)
|
|
goto done;
|
|
|
|
/* Has data been written to the file? */
|
|
if (inout == TRUE) {
|
|
retval = ahd_proc_write_seeprom(ahd, buffer, length);
|
|
goto done;
|
|
}
|
|
|
|
if (start)
|
|
*start = buffer;
|
|
|
|
info.buffer = buffer;
|
|
info.length = length;
|
|
info.offset = offset;
|
|
info.pos = 0;
|
|
|
|
copy_info(&info, "Adaptec AIC79xx driver version: %s\n",
|
|
AIC79XX_DRIVER_VERSION);
|
|
copy_info(&info, "%s\n", ahd->description);
|
|
ahd_controller_info(ahd, ahd_info);
|
|
copy_info(&info, "%s\n", ahd_info);
|
|
copy_info(&info, "Allocated SCBs: %d, SG List Length: %d\n\n",
|
|
ahd->scb_data.numscbs, AHD_NSEG);
|
|
|
|
max_targ = 15;
|
|
|
|
if (ahd->seep_config == NULL)
|
|
copy_info(&info, "No Serial EEPROM\n");
|
|
else {
|
|
copy_info(&info, "Serial EEPROM:\n");
|
|
for (i = 0; i < sizeof(*ahd->seep_config)/2; i++) {
|
|
if (((i % 8) == 0) && (i != 0)) {
|
|
copy_info(&info, "\n");
|
|
}
|
|
copy_info(&info, "0x%.4x ",
|
|
((uint16_t*)ahd->seep_config)[i]);
|
|
}
|
|
copy_info(&info, "\n");
|
|
}
|
|
copy_info(&info, "\n");
|
|
|
|
if ((ahd->features & AHD_WIDE) == 0)
|
|
max_targ = 7;
|
|
|
|
for (i = 0; i <= max_targ; i++) {
|
|
|
|
ahd_dump_target_state(ahd, &info, ahd->our_id, 'A',
|
|
/*target_id*/i, /*target_offset*/i);
|
|
}
|
|
retval = info.pos > info.offset ? info.pos - info.offset : 0;
|
|
done:
|
|
ahd_list_unlock(&l);
|
|
return (retval);
|
|
}
|