android_kernel_motorola_sm6225/include/asm-arm/arch-pnx4008/i2c.h
Vitaly Wool 41561f28e7 i2c: New Philips PNX bus driver
New I2C bus driver for Philips ARM boards (Philips IP3204 I2C IP
block). This I2C controller can be found on (at least) PNX010x,
PNX52xx and PNX4008 Philips boards.

Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2006-12-10 21:21:29 +01:00

67 lines
2 KiB
C

/*
* PNX4008-specific tweaks for I2C IP3204 block
*
* Author: Vitaly Wool <vwool@ru.mvista.com>
*
* 2005 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASM_ARCH_I2C_H__
#define __ASM_ARCH_I2C_H__
#include <linux/pm.h>
#include <linux/platform_device.h>
enum {
mstatus_tdi = 0x00000001,
mstatus_afi = 0x00000002,
mstatus_nai = 0x00000004,
mstatus_drmi = 0x00000008,
mstatus_active = 0x00000020,
mstatus_scl = 0x00000040,
mstatus_sda = 0x00000080,
mstatus_rff = 0x00000100,
mstatus_rfe = 0x00000200,
mstatus_tff = 0x00000400,
mstatus_tfe = 0x00000800,
};
enum {
mcntrl_tdie = 0x00000001,
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
mcntrl_daie = 0x00000020,
mcntrl_rffie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
};
enum {
rw_bit = 1 << 0,
start_bit = 1 << 8,
stop_bit = 1 << 9,
};
#define I2C_REG_RX(a) ((a)->ioaddr) /* Rx FIFO reg (RO) */
#define I2C_REG_TX(a) ((a)->ioaddr) /* Tx FIFO reg (WO) */
#define I2C_REG_STS(a) ((a)->ioaddr + 0x04) /* Status reg (RO) */
#define I2C_REG_CTL(a) ((a)->ioaddr + 0x08) /* Ctl reg */
#define I2C_REG_CKL(a) ((a)->ioaddr + 0x0c) /* Clock divider low */
#define I2C_REG_CKH(a) ((a)->ioaddr + 0x10) /* Clock divider high */
#define I2C_REG_ADR(a) ((a)->ioaddr + 0x14) /* I2C address */
#define I2C_REG_RFL(a) ((a)->ioaddr + 0x18) /* Rx FIFO level (RO) */
#define I2C_REG_TFL(a) ((a)->ioaddr + 0x1c) /* Tx FIFO level (RO) */
#define I2C_REG_RXB(a) ((a)->ioaddr + 0x20) /* Num of bytes Rx-ed (RO) */
#define I2C_REG_TXB(a) ((a)->ioaddr + 0x24) /* Num of bytes Tx-ed (RO) */
#define I2C_REG_TXS(a) ((a)->ioaddr + 0x28) /* Tx slave FIFO (RO) */
#define I2C_REG_STFL(a) ((a)->ioaddr + 0x2c) /* Tx slave FIFO level (RO) */
#define HCLK_MHZ 13
#define I2C_CHIP_NAME "PNX4008-I2C"
#endif /* __ASM_ARCH_I2C_H___ */