5582b0648d
This fixes a build error where references to pci_cache_line_size are undefined, as this ceases to be exported when PCI_DISABLE_MWI is enabled, as is now the default. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
146 lines
4.1 KiB
C
146 lines
4.1 KiB
C
/*
|
|
* Low-Level PCI Support for the SH7780
|
|
*
|
|
* Copyright (C) 2005 - 2009 Paul Mundt
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include "pci-sh4.h"
|
|
|
|
static struct resource sh7785_io_resource = {
|
|
.name = "SH7785_IO",
|
|
.start = SH7780_PCI_IO_BASE,
|
|
.end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
|
|
.flags = IORESOURCE_IO
|
|
};
|
|
|
|
static struct resource sh7785_mem_resource = {
|
|
.name = "SH7785_mem",
|
|
.start = SH7780_PCI_MEMORY_BASE,
|
|
.end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
|
|
.flags = IORESOURCE_MEM
|
|
};
|
|
|
|
static struct pci_channel sh7780_pci_controller = {
|
|
.pci_ops = &sh4_pci_ops,
|
|
.mem_resource = &sh7785_mem_resource,
|
|
.mem_offset = 0x00000000,
|
|
.io_resource = &sh7785_io_resource,
|
|
.io_offset = 0x00000000,
|
|
.io_map_base = SH7780_PCI_IO_BASE,
|
|
};
|
|
|
|
static struct sh4_pci_address_map sh7780_pci_map = {
|
|
.window0 = {
|
|
#if defined(CONFIG_32BIT)
|
|
.base = SH7780_32BIT_DDR_BASE_ADDR,
|
|
.size = 0x40000000,
|
|
#else
|
|
.base = SH7780_CS0_BASE_ADDR,
|
|
.size = 0x20000000,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
static int __init sh7780_pci_init(void)
|
|
{
|
|
struct pci_channel *chan = &sh7780_pci_controller;
|
|
unsigned int id;
|
|
const char *type = NULL;
|
|
int ret;
|
|
u32 word;
|
|
|
|
printk(KERN_NOTICE "PCI: Starting intialization.\n");
|
|
|
|
chan->reg_base = 0xfe040000;
|
|
|
|
/* Enable CPU access to the PCIC registers. */
|
|
__raw_writel(PCIECR_ENBL, PCIECR);
|
|
|
|
id = __raw_readw(chan->reg_base + SH7780_PCIVID);
|
|
if (id != SH7780_VENDOR_ID) {
|
|
printk(KERN_ERR "PCI: Unknown vendor ID 0x%04x.\n", id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
id = __raw_readw(chan->reg_base + SH7780_PCIDID);
|
|
type = (id == SH7763_DEVICE_ID) ? "SH7763" :
|
|
(id == SH7780_DEVICE_ID) ? "SH7780" :
|
|
(id == SH7781_DEVICE_ID) ? "SH7781" :
|
|
(id == SH7785_DEVICE_ID) ? "SH7785" :
|
|
NULL;
|
|
if (unlikely(!type)) {
|
|
printk(KERN_ERR "PCI: Found an unsupported Renesas host "
|
|
"controller, device id 0x%04x.\n", id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
printk(KERN_NOTICE "PCI: Found a Renesas %s host "
|
|
"controller, revision %d.\n", type,
|
|
__raw_readb(chan->reg_base + SH7780_PCIRID));
|
|
|
|
if ((ret = sh4_pci_check_direct(chan)) != 0)
|
|
return ret;
|
|
|
|
/*
|
|
* Set the class and sub-class codes.
|
|
*/
|
|
__raw_writeb(PCI_CLASS_BRIDGE_HOST >> 8,
|
|
chan->reg_base + SH7780_PCIBCC);
|
|
__raw_writeb(PCI_CLASS_BRIDGE_HOST & 0xff,
|
|
chan->reg_base + SH7780_PCISUB);
|
|
|
|
/*
|
|
* Set IO and Mem windows to local address
|
|
* Make PCI and local address the same for easy 1 to 1 mapping
|
|
*/
|
|
pci_write_reg(chan, sh7780_pci_map.window0.size - 0xfffff, SH4_PCILSR0);
|
|
/* Set the values on window 0 PCI config registers */
|
|
pci_write_reg(chan, sh7780_pci_map.window0.base, SH4_PCILAR0);
|
|
pci_write_reg(chan, sh7780_pci_map.window0.base, SH7780_PCIMBAR0);
|
|
|
|
pci_write_reg(chan, 0x0000380f, SH4_PCIAINTM);
|
|
|
|
/* Set up standard PCI config registers */
|
|
__raw_writew(0xFB00, chan->reg_base + SH7780_PCISTATUS);
|
|
__raw_writew(0x0047, chan->reg_base + SH7780_PCICMD);
|
|
__raw_writew(0x1912, chan->reg_base + SH7780_PCISVID);
|
|
__raw_writew(0x0001, chan->reg_base + SH7780_PCISID);
|
|
|
|
__raw_writeb(0x00, chan->reg_base + SH7780_PCIPIF);
|
|
|
|
/* Apply any last-minute PCIC fixups */
|
|
pci_fixup_pcic(chan);
|
|
|
|
pci_write_reg(chan, 0xfd000000, SH7780_PCIMBR0);
|
|
pci_write_reg(chan, 0x00fc0000, SH7780_PCIMBMR0);
|
|
|
|
#ifdef CONFIG_32BIT
|
|
pci_write_reg(chan, 0xc0000000, SH7780_PCIMBR2);
|
|
pci_write_reg(chan, 0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
|
|
#endif
|
|
|
|
/* Set IOBR for windows containing area specified in pci.h */
|
|
pci_write_reg(chan, chan->io_resource->start & ~(SH7780_PCI_IO_SIZE-1),
|
|
SH7780_PCIIOBR);
|
|
pci_write_reg(chan, ((SH7780_PCI_IO_SIZE-1) & (7<<18)),
|
|
SH7780_PCIIOBMR);
|
|
|
|
/* SH7780 init done, set central function init complete */
|
|
/* use round robin mode to stop a device starving/overruning */
|
|
word = SH4_PCICR_PREFIX | SH4_PCICR_CFIN | SH4_PCICR_FTO;
|
|
pci_write_reg(chan, word, SH4_PCICR);
|
|
|
|
register_pci_controller(chan);
|
|
|
|
return 0;
|
|
}
|
|
arch_initcall(sh7780_pci_init);
|