7ea3bbbc89
Patch from Richard Purdie Move platform_scoop_config from the SharpSL scoop PCMCIA driver to the SCOOP driver. This avoids build failures when PCMCIA is not built or is modular (scoop.c itself cannot be modular). Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
285 lines
7.5 KiB
C
285 lines
7.5 KiB
C
/*
|
|
* Sharp SL-C7xx Series PCMCIA routines
|
|
*
|
|
* Copyright (c) 2004-2005 Richard Purdie
|
|
*
|
|
* Based on Sharp's 2.4 kernel patches and pxa2xx_mainstone.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/hardware/scoop.h>
|
|
|
|
#include "soc_common.h"
|
|
|
|
#define NO_KEEP_VS 0x0001
|
|
#define SCOOP_DEV platform_scoop_config->devs
|
|
|
|
static void sharpsl_pcmcia_init_reset(struct soc_pcmcia_socket *skt)
|
|
{
|
|
struct scoop_pcmcia_dev *scoopdev = &SCOOP_DEV[skt->nr];
|
|
|
|
reset_scoop(scoopdev->dev);
|
|
|
|
/* Shared power controls need to be handled carefully */
|
|
if (platform_scoop_config->power_ctrl)
|
|
platform_scoop_config->power_ctrl(scoopdev->dev, 0x0000, skt->nr);
|
|
else
|
|
write_scoop_reg(scoopdev->dev, SCOOP_CPR, 0x0000);
|
|
|
|
scoopdev->keep_vs = NO_KEEP_VS;
|
|
scoopdev->keep_rd = 0;
|
|
}
|
|
|
|
static int sharpsl_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
|
|
{
|
|
int ret;
|
|
|
|
if (platform_scoop_config->pcmcia_init)
|
|
platform_scoop_config->pcmcia_init();
|
|
|
|
/* Register interrupts */
|
|
if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
|
|
struct pcmcia_irqs cd_irq;
|
|
|
|
cd_irq.sock = skt->nr;
|
|
cd_irq.irq = SCOOP_DEV[skt->nr].cd_irq;
|
|
cd_irq.str = SCOOP_DEV[skt->nr].cd_irq_str;
|
|
ret = soc_pcmcia_request_irqs(skt, &cd_irq, 1);
|
|
|
|
if (ret) {
|
|
printk(KERN_ERR "Request for Compact Flash IRQ failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
skt->irq = SCOOP_DEV[skt->nr].irq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sharpsl_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
|
|
{
|
|
if (SCOOP_DEV[skt->nr].cd_irq >= 0) {
|
|
struct pcmcia_irqs cd_irq;
|
|
|
|
cd_irq.sock = skt->nr;
|
|
cd_irq.irq = SCOOP_DEV[skt->nr].cd_irq;
|
|
cd_irq.str = SCOOP_DEV[skt->nr].cd_irq_str;
|
|
soc_pcmcia_free_irqs(skt, &cd_irq, 1);
|
|
}
|
|
}
|
|
|
|
|
|
static void sharpsl_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
|
|
struct pcmcia_state *state)
|
|
{
|
|
unsigned short cpr, csr;
|
|
struct device *scoop = SCOOP_DEV[skt->nr].dev;
|
|
|
|
cpr = read_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_CPR);
|
|
|
|
write_scoop_reg(scoop, SCOOP_IRM, 0x00FF);
|
|
write_scoop_reg(scoop, SCOOP_ISR, 0x0000);
|
|
write_scoop_reg(scoop, SCOOP_IRM, 0x0000);
|
|
csr = read_scoop_reg(scoop, SCOOP_CSR);
|
|
if (csr & 0x0004) {
|
|
/* card eject */
|
|
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
|
|
SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
|
|
}
|
|
else if (!(SCOOP_DEV[skt->nr].keep_vs & NO_KEEP_VS)) {
|
|
/* keep vs1,vs2 */
|
|
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
|
|
csr |= SCOOP_DEV[skt->nr].keep_vs;
|
|
}
|
|
else if (cpr & 0x0003) {
|
|
/* power on */
|
|
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
|
|
SCOOP_DEV[skt->nr].keep_vs = (csr & 0x00C0);
|
|
}
|
|
else {
|
|
/* card detect */
|
|
if ((machine_is_spitz() || machine_is_borzoi()) && skt->nr == 1) {
|
|
write_scoop_reg(scoop, SCOOP_CDR, 0x0000);
|
|
} else {
|
|
write_scoop_reg(scoop, SCOOP_CDR, 0x0002);
|
|
}
|
|
}
|
|
|
|
state->detect = (csr & 0x0004) ? 0 : 1;
|
|
state->ready = (csr & 0x0002) ? 1 : 0;
|
|
state->bvd1 = (csr & 0x0010) ? 1 : 0;
|
|
state->bvd2 = (csr & 0x0020) ? 1 : 0;
|
|
state->wrprot = (csr & 0x0008) ? 1 : 0;
|
|
state->vs_3v = (csr & 0x0040) ? 0 : 1;
|
|
state->vs_Xv = (csr & 0x0080) ? 0 : 1;
|
|
|
|
if ((cpr & 0x0080) && ((cpr & 0x8040) != 0x8040)) {
|
|
printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr);
|
|
}
|
|
}
|
|
|
|
|
|
static int sharpsl_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
|
|
const socket_state_t *state)
|
|
{
|
|
unsigned long flags;
|
|
struct device *scoop = SCOOP_DEV[skt->nr].dev;
|
|
|
|
unsigned short cpr, ncpr, ccr, nccr, mcr, nmcr, imr, nimr;
|
|
|
|
switch (state->Vcc) {
|
|
case 0: break;
|
|
case 33: break;
|
|
case 50: break;
|
|
default:
|
|
printk(KERN_ERR "sharpsl_pcmcia_configure_socket(): bad Vcc %u\n", state->Vcc);
|
|
return -1;
|
|
}
|
|
|
|
if ((state->Vpp!=state->Vcc) && (state->Vpp!=0)) {
|
|
printk(KERN_ERR "CF slot cannot support Vpp %u\n", state->Vpp);
|
|
return -1;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
|
|
nmcr = (mcr = read_scoop_reg(scoop, SCOOP_MCR)) & ~0x0010;
|
|
ncpr = (cpr = read_scoop_reg(scoop, SCOOP_CPR)) & ~0x0083;
|
|
nccr = (ccr = read_scoop_reg(scoop, SCOOP_CCR)) & ~0x0080;
|
|
nimr = (imr = read_scoop_reg(scoop, SCOOP_IMR)) & ~0x003E;
|
|
|
|
if ((machine_is_spitz() || machine_is_borzoi() || machine_is_akita()) && skt->nr == 0) {
|
|
ncpr |= (state->Vcc == 33) ? 0x0002 :
|
|
(state->Vcc == 50) ? 0x0002 : 0;
|
|
} else {
|
|
ncpr |= (state->Vcc == 33) ? 0x0001 :
|
|
(state->Vcc == 50) ? 0x0002 : 0;
|
|
}
|
|
nmcr |= (state->flags&SS_IOCARD) ? 0x0010 : 0;
|
|
ncpr |= (state->flags&SS_OUTPUT_ENA) ? 0x0080 : 0;
|
|
nccr |= (state->flags&SS_RESET)? 0x0080: 0;
|
|
nimr |= ((skt->status&SS_DETECT) ? 0x0004 : 0)|
|
|
((skt->status&SS_READY) ? 0x0002 : 0)|
|
|
((skt->status&SS_BATDEAD)? 0x0010 : 0)|
|
|
((skt->status&SS_BATWARN)? 0x0020 : 0)|
|
|
((skt->status&SS_STSCHG) ? 0x0010 : 0)|
|
|
((skt->status&SS_WRPROT) ? 0x0008 : 0);
|
|
|
|
if (!(ncpr & 0x0003)) {
|
|
SCOOP_DEV[skt->nr].keep_rd = 0;
|
|
} else if (!SCOOP_DEV[skt->nr].keep_rd) {
|
|
if (nccr & 0x0080)
|
|
SCOOP_DEV[skt->nr].keep_rd = 1;
|
|
else
|
|
nccr |= 0x0080;
|
|
}
|
|
|
|
if (mcr != nmcr)
|
|
write_scoop_reg(scoop, SCOOP_MCR, nmcr);
|
|
if (cpr != ncpr) {
|
|
if (platform_scoop_config->power_ctrl)
|
|
platform_scoop_config->power_ctrl(scoop, ncpr , skt->nr);
|
|
else
|
|
write_scoop_reg(scoop, SCOOP_CPR, ncpr);
|
|
}
|
|
if (ccr != nccr)
|
|
write_scoop_reg(scoop, SCOOP_CCR, nccr);
|
|
if (imr != nimr)
|
|
write_scoop_reg(scoop, SCOOP_IMR, nimr);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sharpsl_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
|
|
{
|
|
sharpsl_pcmcia_init_reset(skt);
|
|
|
|
/* Enable interrupt */
|
|
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_IMR, 0x00C0);
|
|
write_scoop_reg(SCOOP_DEV[skt->nr].dev, SCOOP_MCR, 0x0101);
|
|
SCOOP_DEV[skt->nr].keep_vs = NO_KEEP_VS;
|
|
}
|
|
|
|
static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
|
|
{
|
|
sharpsl_pcmcia_init_reset(skt);
|
|
}
|
|
|
|
static struct pcmcia_low_level sharpsl_pcmcia_ops = {
|
|
.owner = THIS_MODULE,
|
|
.hw_init = sharpsl_pcmcia_hw_init,
|
|
.hw_shutdown = sharpsl_pcmcia_hw_shutdown,
|
|
.socket_state = sharpsl_pcmcia_socket_state,
|
|
.configure_socket = sharpsl_pcmcia_configure_socket,
|
|
.socket_init = sharpsl_pcmcia_socket_init,
|
|
.socket_suspend = sharpsl_pcmcia_socket_suspend,
|
|
.first = 0,
|
|
.nr = 0,
|
|
};
|
|
|
|
#ifdef CONFIG_SA1100_COLLIE
|
|
#include "sa11xx_base.h"
|
|
|
|
int __init pcmcia_collie_init(struct device *dev)
|
|
{
|
|
int ret = -ENODEV;
|
|
|
|
if (machine_is_collie())
|
|
ret = sa11xx_drv_pcmcia_probe(dev, &sharpsl_pcmcia_ops, 0, 1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#else
|
|
|
|
static struct platform_device *sharpsl_pcmcia_device;
|
|
|
|
static int __init sharpsl_pcmcia_init(void)
|
|
{
|
|
int ret;
|
|
|
|
sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs;
|
|
sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
|
|
|
|
if (!sharpsl_pcmcia_device)
|
|
return -ENOMEM;
|
|
|
|
sharpsl_pcmcia_device->dev.platform_data = &sharpsl_pcmcia_ops;
|
|
sharpsl_pcmcia_device->dev.parent = platform_scoop_config->devs[0].dev;
|
|
|
|
ret = platform_device_add(sharpsl_pcmcia_device);
|
|
|
|
if (ret)
|
|
platform_device_put(sharpsl_pcmcia_device);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void __exit sharpsl_pcmcia_exit(void)
|
|
{
|
|
platform_device_unregister(sharpsl_pcmcia_device);
|
|
}
|
|
|
|
fs_initcall(sharpsl_pcmcia_init);
|
|
module_exit(sharpsl_pcmcia_exit);
|
|
#endif
|
|
|
|
MODULE_DESCRIPTION("Sharp SL Series PCMCIA Support");
|
|
MODULE_LICENSE("GPL");
|