android_kernel_motorola_sm6225/drivers/input/touchscreen/fujitsu_ts.c
Jiri Slaby 7b19ada2ed get rid of input BIT* duplicate defines
get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:42 -07:00

189 lines
4.2 KiB
C

/*
* Fujitsu serial touchscreen driver
*
* Copyright (c) Dmitry Torokhov <dtor@mail.ru>
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#define DRIVER_DESC "Fujitsu serial touchscreen driver"
MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
#define FUJITSU_LENGTH 5
/*
* Per-touchscreen data.
*/
struct fujitsu {
struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[FUJITSU_LENGTH];
char phys[32];
};
/*
* Decode serial data (5 bytes per packet)
* First byte
* 1 C 0 0 R S S S
* Where C is 1 while in calibration mode (which we don't use)
* R is 1 when no coordinate corection was done.
* S are button state
*/
static irqreturn_t fujitsu_interrupt(struct serio *serio,
unsigned char data, unsigned int flags)
{
struct fujitsu *fujitsu = serio_get_drvdata(serio);
struct input_dev *dev = fujitsu->dev;
if (fujitsu->idx == 0) {
/* resync skip until start of frame */
if ((data & 0xf0) != 0x80)
return IRQ_HANDLED;
} else {
/* resync skip garbage */
if (data & 0x80) {
fujitsu->idx = 0;
return IRQ_HANDLED;
}
}
fujitsu->data[fujitsu->idx++] = data;
if (fujitsu->idx == FUJITSU_LENGTH) {
input_report_abs(dev, ABS_X,
(fujitsu->data[2] << 7) | fujitsu->data[1]);
input_report_abs(dev, ABS_Y,
(fujitsu->data[4] << 7) | fujitsu->data[3]);
input_report_key(dev, BTN_TOUCH,
(fujitsu->data[0] & 0x03) != 2);
input_sync(dev);
fujitsu->idx = 0;
}
return IRQ_HANDLED;
}
/*
* fujitsu_disconnect() is the opposite of fujitsu_connect()
*/
static void fujitsu_disconnect(struct serio *serio)
{
struct fujitsu *fujitsu = serio_get_drvdata(serio);
input_get_device(fujitsu->dev);
input_unregister_device(fujitsu->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_put_device(fujitsu->dev);
kfree(fujitsu);
}
/*
* fujitsu_connect() is the routine that is called when someone adds a
* new serio device that supports the Fujitsu protocol and registers it
* as input device.
*/
static int fujitsu_connect(struct serio *serio, struct serio_driver *drv)
{
struct fujitsu *fujitsu;
struct input_dev *input_dev;
int err;
fujitsu = kzalloc(sizeof(struct fujitsu), GFP_KERNEL);
input_dev = input_allocate_device();
if (!fujitsu || !input_dev) {
err = -ENOMEM;
goto fail1;
}
fujitsu->serio = serio;
fujitsu->dev = input_dev;
snprintf(fujitsu->phys, sizeof(fujitsu->phys),
"%s/input0", serio->phys);
input_dev->name = "Fujitsu Serial Touchscreen";
input_dev->phys = fujitsu->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_FUJITSU;
input_dev->id.product = 0;
input_dev->id.version = 0x0100;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(input_dev, ABS_X, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_Y, 0, 4096, 0, 0);
serio_set_drvdata(serio, fujitsu);
err = serio_open(serio, drv);
if (err)
goto fail2;
err = input_register_device(fujitsu->dev);
if (err)
goto fail3;
return 0;
fail3:
serio_close(serio);
fail2:
serio_set_drvdata(serio, NULL);
fail1:
input_free_device(input_dev);
kfree(fujitsu);
return err;
}
/*
* The serio driver structure.
*/
static struct serio_device_id fujitsu_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_FUJITSU,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, fujitsu_serio_ids);
static struct serio_driver fujitsu_drv = {
.driver = {
.name = "fujitsu_ts",
},
.description = DRIVER_DESC,
.id_table = fujitsu_serio_ids,
.interrupt = fujitsu_interrupt,
.connect = fujitsu_connect,
.disconnect = fujitsu_disconnect,
};
static int __init fujitsu_init(void)
{
return serio_register_driver(&fujitsu_drv);
}
static void __exit fujitsu_exit(void)
{
serio_unregister_driver(&fujitsu_drv);
}
module_init(fujitsu_init);
module_exit(fujitsu_exit);