0080e66755
Intel now has support for Architectural Performance Monitoring Counters ( Refer to IA-32 Intel Architecture Software Developer's Manual http://www.intel.com/design/pentium4/manuals/253669.htm ). This feature is present starting from Intel Core Duo and Intel Core Solo processors. What this means is, the performance monitoring counters and some performance monitoring events are now defined in an architectural way (using cpuid). And there will be no need to check for family/model etc for these architectural events. Below is the patch to use this performance counters in nmi watchdog driver. Patch handles both i386 and x86-64 kernels. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
680 lines
17 KiB
C
680 lines
17 KiB
C
/*
|
|
* linux/arch/i386/nmi.c
|
|
*
|
|
* NMI watchdog support on APIC systems
|
|
*
|
|
* Started by Ingo Molnar <mingo@redhat.com>
|
|
*
|
|
* Fixes:
|
|
* Mikael Pettersson : AMD K7 support for local APIC NMI watchdog.
|
|
* Mikael Pettersson : Power Management for local APIC NMI watchdog.
|
|
* Mikael Pettersson : Pentium 4 support for local APIC NMI watchdog.
|
|
* Pavel Machek and
|
|
* Mikael Pettersson : PM converted to driver model. Disable/enable API.
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nmi.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/sysctl.h>
|
|
#include <linux/percpu.h>
|
|
|
|
#include <asm/smp.h>
|
|
#include <asm/nmi.h>
|
|
#include <asm/intel_arch_perfmon.h>
|
|
|
|
#include "mach_traps.h"
|
|
|
|
unsigned int nmi_watchdog = NMI_NONE;
|
|
extern int unknown_nmi_panic;
|
|
static unsigned int nmi_hz = HZ;
|
|
static unsigned int nmi_perfctr_msr; /* the MSR to reset in NMI handler */
|
|
static unsigned int nmi_p4_cccr_val;
|
|
extern void show_registers(struct pt_regs *regs);
|
|
|
|
/*
|
|
* lapic_nmi_owner tracks the ownership of the lapic NMI hardware:
|
|
* - it may be reserved by some other driver, or not
|
|
* - when not reserved by some other driver, it may be used for
|
|
* the NMI watchdog, or not
|
|
*
|
|
* This is maintained separately from nmi_active because the NMI
|
|
* watchdog may also be driven from the I/O APIC timer.
|
|
*/
|
|
static DEFINE_SPINLOCK(lapic_nmi_owner_lock);
|
|
static unsigned int lapic_nmi_owner;
|
|
#define LAPIC_NMI_WATCHDOG (1<<0)
|
|
#define LAPIC_NMI_RESERVED (1<<1)
|
|
|
|
/* nmi_active:
|
|
* +1: the lapic NMI watchdog is active, but can be disabled
|
|
* 0: the lapic NMI watchdog has not been set up, and cannot
|
|
* be enabled
|
|
* -1: the lapic NMI watchdog is disabled, but can be enabled
|
|
*/
|
|
int nmi_active;
|
|
|
|
#define K7_EVNTSEL_ENABLE (1 << 22)
|
|
#define K7_EVNTSEL_INT (1 << 20)
|
|
#define K7_EVNTSEL_OS (1 << 17)
|
|
#define K7_EVNTSEL_USR (1 << 16)
|
|
#define K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING 0x76
|
|
#define K7_NMI_EVENT K7_EVENT_CYCLES_PROCESSOR_IS_RUNNING
|
|
|
|
#define P6_EVNTSEL0_ENABLE (1 << 22)
|
|
#define P6_EVNTSEL_INT (1 << 20)
|
|
#define P6_EVNTSEL_OS (1 << 17)
|
|
#define P6_EVNTSEL_USR (1 << 16)
|
|
#define P6_EVENT_CPU_CLOCKS_NOT_HALTED 0x79
|
|
#define P6_NMI_EVENT P6_EVENT_CPU_CLOCKS_NOT_HALTED
|
|
|
|
#define MSR_P4_MISC_ENABLE 0x1A0
|
|
#define MSR_P4_MISC_ENABLE_PERF_AVAIL (1<<7)
|
|
#define MSR_P4_MISC_ENABLE_PEBS_UNAVAIL (1<<12)
|
|
#define MSR_P4_PERFCTR0 0x300
|
|
#define MSR_P4_CCCR0 0x360
|
|
#define P4_ESCR_EVENT_SELECT(N) ((N)<<25)
|
|
#define P4_ESCR_OS (1<<3)
|
|
#define P4_ESCR_USR (1<<2)
|
|
#define P4_CCCR_OVF_PMI0 (1<<26)
|
|
#define P4_CCCR_OVF_PMI1 (1<<27)
|
|
#define P4_CCCR_THRESHOLD(N) ((N)<<20)
|
|
#define P4_CCCR_COMPLEMENT (1<<19)
|
|
#define P4_CCCR_COMPARE (1<<18)
|
|
#define P4_CCCR_REQUIRED (3<<16)
|
|
#define P4_CCCR_ESCR_SELECT(N) ((N)<<13)
|
|
#define P4_CCCR_ENABLE (1<<12)
|
|
/* Set up IQ_COUNTER0 to behave like a clock, by having IQ_CCCR0 filter
|
|
CRU_ESCR0 (with any non-null event selector) through a complemented
|
|
max threshold. [IA32-Vol3, Section 14.9.9] */
|
|
#define MSR_P4_IQ_COUNTER0 0x30C
|
|
#define P4_NMI_CRU_ESCR0 (P4_ESCR_EVENT_SELECT(0x3F)|P4_ESCR_OS|P4_ESCR_USR)
|
|
#define P4_NMI_IQ_CCCR0 \
|
|
(P4_CCCR_OVF_PMI0|P4_CCCR_THRESHOLD(15)|P4_CCCR_COMPLEMENT| \
|
|
P4_CCCR_COMPARE|P4_CCCR_REQUIRED|P4_CCCR_ESCR_SELECT(4)|P4_CCCR_ENABLE)
|
|
|
|
#define ARCH_PERFMON_NMI_EVENT_SEL ARCH_PERFMON_UNHALTED_CORE_CYCLES_SEL
|
|
#define ARCH_PERFMON_NMI_EVENT_UMASK ARCH_PERFMON_UNHALTED_CORE_CYCLES_UMASK
|
|
|
|
#ifdef CONFIG_SMP
|
|
/* The performance counters used by NMI_LOCAL_APIC don't trigger when
|
|
* the CPU is idle. To make sure the NMI watchdog really ticks on all
|
|
* CPUs during the test make them busy.
|
|
*/
|
|
static __init void nmi_cpu_busy(void *data)
|
|
{
|
|
volatile int *endflag = data;
|
|
local_irq_enable();
|
|
/* Intentionally don't use cpu_relax here. This is
|
|
to make sure that the performance counter really ticks,
|
|
even if there is a simulator or similar that catches the
|
|
pause instruction. On a real HT machine this is fine because
|
|
all other CPUs are busy with "useless" delay loops and don't
|
|
care if they get somewhat less cycles. */
|
|
while (*endflag == 0)
|
|
barrier();
|
|
}
|
|
#endif
|
|
|
|
static int __init check_nmi_watchdog(void)
|
|
{
|
|
volatile int endflag = 0;
|
|
unsigned int *prev_nmi_count;
|
|
int cpu;
|
|
|
|
if (nmi_watchdog == NMI_NONE)
|
|
return 0;
|
|
|
|
prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
|
|
if (!prev_nmi_count)
|
|
return -1;
|
|
|
|
printk(KERN_INFO "Testing NMI watchdog ... ");
|
|
|
|
if (nmi_watchdog == NMI_LOCAL_APIC)
|
|
smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
|
|
|
|
for_each_possible_cpu(cpu)
|
|
prev_nmi_count[cpu] = per_cpu(irq_stat, cpu).__nmi_count;
|
|
local_irq_enable();
|
|
mdelay((10*1000)/nmi_hz); // wait 10 ticks
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
#ifdef CONFIG_SMP
|
|
/* Check cpu_callin_map here because that is set
|
|
after the timer is started. */
|
|
if (!cpu_isset(cpu, cpu_callin_map))
|
|
continue;
|
|
#endif
|
|
if (nmi_count(cpu) - prev_nmi_count[cpu] <= 5) {
|
|
endflag = 1;
|
|
printk("CPU#%d: NMI appears to be stuck (%d->%d)!\n",
|
|
cpu,
|
|
prev_nmi_count[cpu],
|
|
nmi_count(cpu));
|
|
nmi_active = 0;
|
|
lapic_nmi_owner &= ~LAPIC_NMI_WATCHDOG;
|
|
kfree(prev_nmi_count);
|
|
return -1;
|
|
}
|
|
}
|
|
endflag = 1;
|
|
printk("OK.\n");
|
|
|
|
/* now that we know it works we can reduce NMI frequency to
|
|
something more reasonable; makes a difference in some configs */
|
|
if (nmi_watchdog == NMI_LOCAL_APIC)
|
|
nmi_hz = 1;
|
|
|
|
kfree(prev_nmi_count);
|
|
return 0;
|
|
}
|
|
/* This needs to happen later in boot so counters are working */
|
|
late_initcall(check_nmi_watchdog);
|
|
|
|
static int __init setup_nmi_watchdog(char *str)
|
|
{
|
|
int nmi;
|
|
|
|
get_option(&str, &nmi);
|
|
|
|
if (nmi >= NMI_INVALID)
|
|
return 0;
|
|
if (nmi == NMI_NONE)
|
|
nmi_watchdog = nmi;
|
|
/*
|
|
* If any other x86 CPU has a local APIC, then
|
|
* please test the NMI stuff there and send me the
|
|
* missing bits. Right now Intel P6/P4 and AMD K7 only.
|
|
*/
|
|
if ((nmi == NMI_LOCAL_APIC) &&
|
|
(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
|
|
(boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
|
|
nmi_watchdog = nmi;
|
|
if ((nmi == NMI_LOCAL_APIC) &&
|
|
(boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
|
|
(boot_cpu_data.x86 == 6 || boot_cpu_data.x86 == 15))
|
|
nmi_watchdog = nmi;
|
|
/*
|
|
* We can enable the IO-APIC watchdog
|
|
* unconditionally.
|
|
*/
|
|
if (nmi == NMI_IO_APIC) {
|
|
nmi_active = 1;
|
|
nmi_watchdog = nmi;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
__setup("nmi_watchdog=", setup_nmi_watchdog);
|
|
|
|
static void disable_intel_arch_watchdog(void);
|
|
|
|
static void disable_lapic_nmi_watchdog(void)
|
|
{
|
|
if (nmi_active <= 0)
|
|
return;
|
|
switch (boot_cpu_data.x86_vendor) {
|
|
case X86_VENDOR_AMD:
|
|
wrmsr(MSR_K7_EVNTSEL0, 0, 0);
|
|
break;
|
|
case X86_VENDOR_INTEL:
|
|
if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
|
|
disable_intel_arch_watchdog();
|
|
break;
|
|
}
|
|
switch (boot_cpu_data.x86) {
|
|
case 6:
|
|
if (boot_cpu_data.x86_model > 0xd)
|
|
break;
|
|
|
|
wrmsr(MSR_P6_EVNTSEL0, 0, 0);
|
|
break;
|
|
case 15:
|
|
if (boot_cpu_data.x86_model > 0x4)
|
|
break;
|
|
|
|
wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
|
|
wrmsr(MSR_P4_CRU_ESCR0, 0, 0);
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
nmi_active = -1;
|
|
/* tell do_nmi() and others that we're not active any more */
|
|
nmi_watchdog = 0;
|
|
}
|
|
|
|
static void enable_lapic_nmi_watchdog(void)
|
|
{
|
|
if (nmi_active < 0) {
|
|
nmi_watchdog = NMI_LOCAL_APIC;
|
|
setup_apic_nmi_watchdog();
|
|
}
|
|
}
|
|
|
|
int reserve_lapic_nmi(void)
|
|
{
|
|
unsigned int old_owner;
|
|
|
|
spin_lock(&lapic_nmi_owner_lock);
|
|
old_owner = lapic_nmi_owner;
|
|
lapic_nmi_owner |= LAPIC_NMI_RESERVED;
|
|
spin_unlock(&lapic_nmi_owner_lock);
|
|
if (old_owner & LAPIC_NMI_RESERVED)
|
|
return -EBUSY;
|
|
if (old_owner & LAPIC_NMI_WATCHDOG)
|
|
disable_lapic_nmi_watchdog();
|
|
return 0;
|
|
}
|
|
|
|
void release_lapic_nmi(void)
|
|
{
|
|
unsigned int new_owner;
|
|
|
|
spin_lock(&lapic_nmi_owner_lock);
|
|
new_owner = lapic_nmi_owner & ~LAPIC_NMI_RESERVED;
|
|
lapic_nmi_owner = new_owner;
|
|
spin_unlock(&lapic_nmi_owner_lock);
|
|
if (new_owner & LAPIC_NMI_WATCHDOG)
|
|
enable_lapic_nmi_watchdog();
|
|
}
|
|
|
|
void disable_timer_nmi_watchdog(void)
|
|
{
|
|
if ((nmi_watchdog != NMI_IO_APIC) || (nmi_active <= 0))
|
|
return;
|
|
|
|
unset_nmi_callback();
|
|
nmi_active = -1;
|
|
nmi_watchdog = NMI_NONE;
|
|
}
|
|
|
|
void enable_timer_nmi_watchdog(void)
|
|
{
|
|
if (nmi_active < 0) {
|
|
nmi_watchdog = NMI_IO_APIC;
|
|
touch_nmi_watchdog();
|
|
nmi_active = 1;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int nmi_pm_active; /* nmi_active before suspend */
|
|
|
|
static int lapic_nmi_suspend(struct sys_device *dev, pm_message_t state)
|
|
{
|
|
nmi_pm_active = nmi_active;
|
|
disable_lapic_nmi_watchdog();
|
|
return 0;
|
|
}
|
|
|
|
static int lapic_nmi_resume(struct sys_device *dev)
|
|
{
|
|
if (nmi_pm_active > 0)
|
|
enable_lapic_nmi_watchdog();
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct sysdev_class nmi_sysclass = {
|
|
set_kset_name("lapic_nmi"),
|
|
.resume = lapic_nmi_resume,
|
|
.suspend = lapic_nmi_suspend,
|
|
};
|
|
|
|
static struct sys_device device_lapic_nmi = {
|
|
.id = 0,
|
|
.cls = &nmi_sysclass,
|
|
};
|
|
|
|
static int __init init_lapic_nmi_sysfs(void)
|
|
{
|
|
int error;
|
|
|
|
if (nmi_active == 0 || nmi_watchdog != NMI_LOCAL_APIC)
|
|
return 0;
|
|
|
|
error = sysdev_class_register(&nmi_sysclass);
|
|
if (!error)
|
|
error = sysdev_register(&device_lapic_nmi);
|
|
return error;
|
|
}
|
|
/* must come after the local APIC's device_initcall() */
|
|
late_initcall(init_lapic_nmi_sysfs);
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
/*
|
|
* Activate the NMI watchdog via the local APIC.
|
|
* Original code written by Keith Owens.
|
|
*/
|
|
|
|
static void clear_msr_range(unsigned int base, unsigned int n)
|
|
{
|
|
unsigned int i;
|
|
|
|
for(i = 0; i < n; ++i)
|
|
wrmsr(base+i, 0, 0);
|
|
}
|
|
|
|
static void write_watchdog_counter(const char *descr)
|
|
{
|
|
u64 count = (u64)cpu_khz * 1000;
|
|
|
|
do_div(count, nmi_hz);
|
|
if(descr)
|
|
Dprintk("setting %s to -0x%08Lx\n", descr, count);
|
|
wrmsrl(nmi_perfctr_msr, 0 - count);
|
|
}
|
|
|
|
static void setup_k7_watchdog(void)
|
|
{
|
|
unsigned int evntsel;
|
|
|
|
nmi_perfctr_msr = MSR_K7_PERFCTR0;
|
|
|
|
clear_msr_range(MSR_K7_EVNTSEL0, 4);
|
|
clear_msr_range(MSR_K7_PERFCTR0, 4);
|
|
|
|
evntsel = K7_EVNTSEL_INT
|
|
| K7_EVNTSEL_OS
|
|
| K7_EVNTSEL_USR
|
|
| K7_NMI_EVENT;
|
|
|
|
wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
|
|
write_watchdog_counter("K7_PERFCTR0");
|
|
apic_write(APIC_LVTPC, APIC_DM_NMI);
|
|
evntsel |= K7_EVNTSEL_ENABLE;
|
|
wrmsr(MSR_K7_EVNTSEL0, evntsel, 0);
|
|
}
|
|
|
|
static void setup_p6_watchdog(void)
|
|
{
|
|
unsigned int evntsel;
|
|
|
|
nmi_perfctr_msr = MSR_P6_PERFCTR0;
|
|
|
|
clear_msr_range(MSR_P6_EVNTSEL0, 2);
|
|
clear_msr_range(MSR_P6_PERFCTR0, 2);
|
|
|
|
evntsel = P6_EVNTSEL_INT
|
|
| P6_EVNTSEL_OS
|
|
| P6_EVNTSEL_USR
|
|
| P6_NMI_EVENT;
|
|
|
|
wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
|
|
write_watchdog_counter("P6_PERFCTR0");
|
|
apic_write(APIC_LVTPC, APIC_DM_NMI);
|
|
evntsel |= P6_EVNTSEL0_ENABLE;
|
|
wrmsr(MSR_P6_EVNTSEL0, evntsel, 0);
|
|
}
|
|
|
|
static int setup_p4_watchdog(void)
|
|
{
|
|
unsigned int misc_enable, dummy;
|
|
|
|
rdmsr(MSR_P4_MISC_ENABLE, misc_enable, dummy);
|
|
if (!(misc_enable & MSR_P4_MISC_ENABLE_PERF_AVAIL))
|
|
return 0;
|
|
|
|
nmi_perfctr_msr = MSR_P4_IQ_COUNTER0;
|
|
nmi_p4_cccr_val = P4_NMI_IQ_CCCR0;
|
|
#ifdef CONFIG_SMP
|
|
if (smp_num_siblings == 2)
|
|
nmi_p4_cccr_val |= P4_CCCR_OVF_PMI1;
|
|
#endif
|
|
|
|
if (!(misc_enable & MSR_P4_MISC_ENABLE_PEBS_UNAVAIL))
|
|
clear_msr_range(0x3F1, 2);
|
|
/* MSR 0x3F0 seems to have a default value of 0xFC00, but current
|
|
docs doesn't fully define it, so leave it alone for now. */
|
|
if (boot_cpu_data.x86_model >= 0x3) {
|
|
/* MSR_P4_IQ_ESCR0/1 (0x3ba/0x3bb) removed */
|
|
clear_msr_range(0x3A0, 26);
|
|
clear_msr_range(0x3BC, 3);
|
|
} else {
|
|
clear_msr_range(0x3A0, 31);
|
|
}
|
|
clear_msr_range(0x3C0, 6);
|
|
clear_msr_range(0x3C8, 6);
|
|
clear_msr_range(0x3E0, 2);
|
|
clear_msr_range(MSR_P4_CCCR0, 18);
|
|
clear_msr_range(MSR_P4_PERFCTR0, 18);
|
|
|
|
wrmsr(MSR_P4_CRU_ESCR0, P4_NMI_CRU_ESCR0, 0);
|
|
wrmsr(MSR_P4_IQ_CCCR0, P4_NMI_IQ_CCCR0 & ~P4_CCCR_ENABLE, 0);
|
|
write_watchdog_counter("P4_IQ_COUNTER0");
|
|
apic_write(APIC_LVTPC, APIC_DM_NMI);
|
|
wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
|
|
return 1;
|
|
}
|
|
|
|
static void disable_intel_arch_watchdog(void)
|
|
{
|
|
unsigned ebx;
|
|
|
|
/*
|
|
* Check whether the Architectural PerfMon supports
|
|
* Unhalted Core Cycles Event or not.
|
|
* NOTE: Corresponding bit = 0 in ebp indicates event present.
|
|
*/
|
|
ebx = cpuid_ebx(10);
|
|
if (!(ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
|
|
wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, 0, 0);
|
|
}
|
|
|
|
static int setup_intel_arch_watchdog(void)
|
|
{
|
|
unsigned int evntsel;
|
|
unsigned ebx;
|
|
|
|
/*
|
|
* Check whether the Architectural PerfMon supports
|
|
* Unhalted Core Cycles Event or not.
|
|
* NOTE: Corresponding bit = 0 in ebp indicates event present.
|
|
*/
|
|
ebx = cpuid_ebx(10);
|
|
if ((ebx & ARCH_PERFMON_UNHALTED_CORE_CYCLES_PRESENT))
|
|
return 0;
|
|
|
|
nmi_perfctr_msr = MSR_ARCH_PERFMON_PERFCTR0;
|
|
|
|
clear_msr_range(MSR_ARCH_PERFMON_EVENTSEL0, 2);
|
|
clear_msr_range(MSR_ARCH_PERFMON_PERFCTR0, 2);
|
|
|
|
evntsel = ARCH_PERFMON_EVENTSEL_INT
|
|
| ARCH_PERFMON_EVENTSEL_OS
|
|
| ARCH_PERFMON_EVENTSEL_USR
|
|
| ARCH_PERFMON_NMI_EVENT_SEL
|
|
| ARCH_PERFMON_NMI_EVENT_UMASK;
|
|
|
|
wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0);
|
|
write_watchdog_counter("INTEL_ARCH_PERFCTR0");
|
|
apic_write(APIC_LVTPC, APIC_DM_NMI);
|
|
evntsel |= ARCH_PERFMON_EVENTSEL0_ENABLE;
|
|
wrmsr(MSR_ARCH_PERFMON_EVENTSEL0, evntsel, 0);
|
|
return 1;
|
|
}
|
|
|
|
void setup_apic_nmi_watchdog (void)
|
|
{
|
|
switch (boot_cpu_data.x86_vendor) {
|
|
case X86_VENDOR_AMD:
|
|
if (boot_cpu_data.x86 != 6 && boot_cpu_data.x86 != 15)
|
|
return;
|
|
setup_k7_watchdog();
|
|
break;
|
|
case X86_VENDOR_INTEL:
|
|
if (cpu_has(&boot_cpu_data, X86_FEATURE_ARCH_PERFMON)) {
|
|
if (!setup_intel_arch_watchdog())
|
|
return;
|
|
break;
|
|
}
|
|
switch (boot_cpu_data.x86) {
|
|
case 6:
|
|
if (boot_cpu_data.x86_model > 0xd)
|
|
return;
|
|
|
|
setup_p6_watchdog();
|
|
break;
|
|
case 15:
|
|
if (boot_cpu_data.x86_model > 0x4)
|
|
return;
|
|
|
|
if (!setup_p4_watchdog())
|
|
return;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
lapic_nmi_owner = LAPIC_NMI_WATCHDOG;
|
|
nmi_active = 1;
|
|
}
|
|
|
|
/*
|
|
* the best way to detect whether a CPU has a 'hard lockup' problem
|
|
* is to check it's local APIC timer IRQ counts. If they are not
|
|
* changing then that CPU has some problem.
|
|
*
|
|
* as these watchdog NMI IRQs are generated on every CPU, we only
|
|
* have to check the current processor.
|
|
*
|
|
* since NMIs don't listen to _any_ locks, we have to be extremely
|
|
* careful not to rely on unsafe variables. The printk might lock
|
|
* up though, so we have to break up any console locks first ...
|
|
* [when there will be more tty-related locks, break them up
|
|
* here too!]
|
|
*/
|
|
|
|
static unsigned int
|
|
last_irq_sums [NR_CPUS],
|
|
alert_counter [NR_CPUS];
|
|
|
|
void touch_nmi_watchdog (void)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Just reset the alert counters, (other CPUs might be
|
|
* spinning on locks we hold):
|
|
*/
|
|
for_each_possible_cpu(i)
|
|
alert_counter[i] = 0;
|
|
|
|
/*
|
|
* Tickle the softlockup detector too:
|
|
*/
|
|
touch_softlockup_watchdog();
|
|
}
|
|
|
|
extern void die_nmi(struct pt_regs *, const char *msg);
|
|
|
|
void nmi_watchdog_tick (struct pt_regs * regs)
|
|
{
|
|
|
|
/*
|
|
* Since current_thread_info()-> is always on the stack, and we
|
|
* always switch the stack NMI-atomically, it's safe to use
|
|
* smp_processor_id().
|
|
*/
|
|
unsigned int sum;
|
|
int cpu = smp_processor_id();
|
|
|
|
sum = per_cpu(irq_stat, cpu).apic_timer_irqs;
|
|
|
|
if (last_irq_sums[cpu] == sum) {
|
|
/*
|
|
* Ayiee, looks like this CPU is stuck ...
|
|
* wait a few IRQs (5 seconds) before doing the oops ...
|
|
*/
|
|
alert_counter[cpu]++;
|
|
if (alert_counter[cpu] == 5*nmi_hz)
|
|
/*
|
|
* die_nmi will return ONLY if NOTIFY_STOP happens..
|
|
*/
|
|
die_nmi(regs, "BUG: NMI Watchdog detected LOCKUP");
|
|
} else {
|
|
last_irq_sums[cpu] = sum;
|
|
alert_counter[cpu] = 0;
|
|
}
|
|
if (nmi_perfctr_msr) {
|
|
if (nmi_perfctr_msr == MSR_P4_IQ_COUNTER0) {
|
|
/*
|
|
* P4 quirks:
|
|
* - An overflown perfctr will assert its interrupt
|
|
* until the OVF flag in its CCCR is cleared.
|
|
* - LVTPC is masked on interrupt and must be
|
|
* unmasked by the LVTPC handler.
|
|
*/
|
|
wrmsr(MSR_P4_IQ_CCCR0, nmi_p4_cccr_val, 0);
|
|
apic_write(APIC_LVTPC, APIC_DM_NMI);
|
|
}
|
|
else if (nmi_perfctr_msr == MSR_P6_PERFCTR0 ||
|
|
nmi_perfctr_msr == MSR_ARCH_PERFMON_PERFCTR0) {
|
|
/* Only P6 based Pentium M need to re-unmask
|
|
* the apic vector but it doesn't hurt
|
|
* other P6 variant */
|
|
apic_write(APIC_LVTPC, APIC_DM_NMI);
|
|
}
|
|
write_watchdog_counter(NULL);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SYSCTL
|
|
|
|
static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
|
|
{
|
|
unsigned char reason = get_nmi_reason();
|
|
char buf[64];
|
|
|
|
if (!(reason & 0xc0)) {
|
|
sprintf(buf, "NMI received for unknown reason %02x\n", reason);
|
|
die_nmi(regs, buf);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* proc handler for /proc/sys/kernel/unknown_nmi_panic
|
|
*/
|
|
int proc_unknown_nmi_panic(ctl_table *table, int write, struct file *file,
|
|
void __user *buffer, size_t *length, loff_t *ppos)
|
|
{
|
|
int old_state;
|
|
|
|
old_state = unknown_nmi_panic;
|
|
proc_dointvec(table, write, file, buffer, length, ppos);
|
|
if (!!old_state == !!unknown_nmi_panic)
|
|
return 0;
|
|
|
|
if (unknown_nmi_panic) {
|
|
if (reserve_lapic_nmi() < 0) {
|
|
unknown_nmi_panic = 0;
|
|
return -EBUSY;
|
|
} else {
|
|
set_nmi_callback(unknown_nmi_panic_callback);
|
|
}
|
|
} else {
|
|
release_lapic_nmi();
|
|
unset_nmi_callback();
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
EXPORT_SYMBOL(nmi_active);
|
|
EXPORT_SYMBOL(nmi_watchdog);
|
|
EXPORT_SYMBOL(reserve_lapic_nmi);
|
|
EXPORT_SYMBOL(release_lapic_nmi);
|
|
EXPORT_SYMBOL(disable_timer_nmi_watchdog);
|
|
EXPORT_SYMBOL(enable_timer_nmi_watchdog);
|