android_kernel_motorola_sm6225/drivers/scsi/FlashPoint.c
Alexey Dobriyan 3235798804 Fix "stuct", "strut", "struc" typos
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-15 02:12:54 +01:00

8233 lines
214 KiB
C

/*
FlashPoint.c -- FlashPoint SCCB Manager for Linux
This file contains the FlashPoint SCCB Manager from BusLogic's FlashPoint
Driver Developer's Kit, with minor modifications by Leonard N. Zubkoff for
Linux compatibility. It was provided by BusLogic in the form of 16 separate
source files, which would have unnecessarily cluttered the scsi directory, so
the individual files have been combined into this single file.
Copyright 1995-1996 by Mylex Corporation. All Rights Reserved
This file is available under both the GNU General Public License
and a BSD-style copyright; see LICENSE.FlashPoint for details.
*/
#include <linux/config.h>
#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
#define MAX_CARDS 8
#undef BUSTYPE_PCI
#define OS_InPortByte(port) inb(port)
#define OS_InPortWord(port) inw(port)
#define OS_InPortLong(port) inl(port)
#define OS_OutPortByte(port, value) outb(value, port)
#define OS_OutPortWord(port, value) outw(value, port)
#define OS_OutPortLong(port, value) outl(value, port)
/*
Define name replacements for compatibility with the Linux BusLogic Driver.
*/
#define SccbMgr_sense_adapter FlashPoint_ProbeHostAdapter
#define SccbMgr_config_adapter FlashPoint_HardwareResetHostAdapter
#define SccbMgr_unload_card FlashPoint_ReleaseHostAdapter
#define SccbMgr_start_sccb FlashPoint_StartCCB
#define SccbMgr_abort_sccb FlashPoint_AbortCCB
#define SccbMgr_my_int FlashPoint_InterruptPending
#define SccbMgr_isr FlashPoint_HandleInterrupt
#define MAX_CDBLEN 12
#define SCAM_LEV_2 1
#define CRCMASK 0xA001
#define BL_VENDOR_ID 0x104B
#define FP_DEVICE_ID 0x8130
#define MM_DEVICE_ID 0x1040
#define FAILURE 0xFFFFFFFFL
typedef unsigned char UCHAR;
typedef unsigned short USHORT;
typedef unsigned int UINT;
typedef unsigned long ULONG;
typedef unsigned char * PUCHAR;
typedef unsigned short* PUSHORT;
typedef unsigned long * PULONG;
typedef void * PVOID;
typedef unsigned char * uchar_ptr;
typedef unsigned short * ushort_ptr;
typedef unsigned long * ulong_ptr;
#define s08bits char
#define s16bits short
#define s32bits long
#define u08bits unsigned s08bits
#define u16bits unsigned s16bits
#define u32bits unsigned s32bits
typedef u08bits * pu08bits;
typedef u16bits * pu16bits;
typedef u32bits * pu32bits;
#define BIT(x) ((UCHAR)(1<<(x))) /* single-bit mask in bit position x */
#define BITW(x) ((USHORT)(1<<(x))) /* single-bit mask in bit position x */
typedef struct _SCCB *PSCCB;
typedef void (*CALL_BK_FN)(PSCCB);
typedef struct SCCBMgr_info {
ULONG si_baseaddr;
UCHAR si_present;
UCHAR si_intvect;
UCHAR si_id;
UCHAR si_lun;
USHORT si_fw_revision;
USHORT si_per_targ_init_sync;
USHORT si_per_targ_fast_nego;
USHORT si_per_targ_ultra_nego;
USHORT si_per_targ_no_disc;
USHORT si_per_targ_wide_nego;
USHORT si_flags;
UCHAR si_card_family;
UCHAR si_bustype;
UCHAR si_card_model[3];
UCHAR si_relative_cardnum;
UCHAR si_reserved[4];
ULONG si_OS_reserved;
UCHAR si_XlatInfo[4];
ULONG si_reserved2[5];
ULONG si_secondary_range;
} SCCBMGR_INFO;
typedef SCCBMGR_INFO * PSCCBMGR_INFO;
#define SCSI_PARITY_ENA 0x0001
#define LOW_BYTE_TERM 0x0010
#define HIGH_BYTE_TERM 0x0020
#define BUSTYPE_PCI 0x3
#define SUPPORT_16TAR_32LUN 0x0002
#define SOFT_RESET 0x0004
#define EXTENDED_TRANSLATION 0x0008
#define POST_ALL_UNDERRRUNS 0x0040
#define FLAG_SCAM_ENABLED 0x0080
#define FLAG_SCAM_LEVEL2 0x0100
#define HARPOON_FAMILY 0x02
#define ISA_BUS_CARD 0x01
#define EISA_BUS_CARD 0x02
#define PCI_BUS_CARD 0x03
#define VESA_BUS_CARD 0x04
/* SCCB struct used for both SCCB and UCB manager compiles!
* The UCB Manager treats the SCCB as it's 'native hardware structure'
*/
#pragma pack(1)
typedef struct _SCCB {
UCHAR OperationCode;
UCHAR ControlByte;
UCHAR CdbLength;
UCHAR RequestSenseLength;
ULONG DataLength;
ULONG DataPointer;
UCHAR CcbRes[2];
UCHAR HostStatus;
UCHAR TargetStatus;
UCHAR TargID;
UCHAR Lun;
UCHAR Cdb[12];
UCHAR CcbRes1;
UCHAR Reserved1;
ULONG Reserved2;
ULONG SensePointer;
CALL_BK_FN SccbCallback; /* VOID (*SccbCallback)(); */
ULONG SccbIOPort; /* Identifies board base port */
UCHAR SccbStatus;
UCHAR SCCBRes2;
USHORT SccbOSFlags;
ULONG Sccb_XferCnt; /* actual transfer count */
ULONG Sccb_ATC;
ULONG SccbVirtDataPtr; /* virtual addr for OS/2 */
ULONG Sccb_res1;
USHORT Sccb_MGRFlags;
USHORT Sccb_sgseg;
UCHAR Sccb_scsimsg; /* identify msg for selection */
UCHAR Sccb_tag;
UCHAR Sccb_scsistat;
UCHAR Sccb_idmsg; /* image of last msg in */
PSCCB Sccb_forwardlink;
PSCCB Sccb_backlink;
ULONG Sccb_savedATC;
UCHAR Save_Cdb[6];
UCHAR Save_CdbLen;
UCHAR Sccb_XferState;
ULONG Sccb_SGoffset;
} SCCB;
#define SCCB_SIZE sizeof(SCCB)
#pragma pack()
#define SCSI_INITIATOR_COMMAND 0x00
#define TARGET_MODE_COMMAND 0x01
#define SCATTER_GATHER_COMMAND 0x02
#define RESIDUAL_COMMAND 0x03
#define RESIDUAL_SG_COMMAND 0x04
#define RESET_COMMAND 0x81
#define F_USE_CMD_Q 0x20 /*Inidcates TAGGED command. */
#define TAG_TYPE_MASK 0xC0 /*Type of tag msg to send. */
#define TAG_Q_MASK 0xE0
#define SCCB_DATA_XFER_OUT 0x10 /* Write */
#define SCCB_DATA_XFER_IN 0x08 /* Read */
#define FOURTEEN_BYTES 0x00 /* Request Sense Buffer size */
#define NO_AUTO_REQUEST_SENSE 0x01 /* No Request Sense Buffer */
#define BUS_FREE_ST 0
#define SELECT_ST 1
#define SELECT_BDR_ST 2 /* Select w\ Bus Device Reset */
#define SELECT_SN_ST 3 /* Select w\ Sync Nego */
#define SELECT_WN_ST 4 /* Select w\ Wide Data Nego */
#define SELECT_Q_ST 5 /* Select w\ Tagged Q'ing */
#define COMMAND_ST 6
#define DATA_OUT_ST 7
#define DATA_IN_ST 8
#define DISCONNECT_ST 9
#define STATUS_ST 10
#define ABORT_ST 11
#define MESSAGE_ST 12
#define F_HOST_XFER_DIR 0x01
#define F_ALL_XFERRED 0x02
#define F_SG_XFER 0x04
#define F_AUTO_SENSE 0x08
#define F_ODD_BALL_CNT 0x10
#define F_NO_DATA_YET 0x80
#define F_STATUSLOADED 0x01
#define F_MSGLOADED 0x02
#define F_DEV_SELECTED 0x04
#define SCCB_COMPLETE 0x00 /* SCCB completed without error */
#define SCCB_DATA_UNDER_RUN 0x0C
#define SCCB_SELECTION_TIMEOUT 0x11 /* Set SCSI selection timed out */
#define SCCB_DATA_OVER_RUN 0x12
#define SCCB_UNEXPECTED_BUS_FREE 0x13 /* Target dropped SCSI BSY */
#define SCCB_PHASE_SEQUENCE_FAIL 0x14 /* Target bus phase sequence failure */
#define SCCB_INVALID_OP_CODE 0x16 /* SCCB invalid operation code */
#define SCCB_INVALID_SCCB 0x1A /* Invalid SCCB - bad parameter */
#define SCCB_GROSS_FW_ERR 0x27 /* Major problem! */
#define SCCB_BM_ERR 0x30 /* BusMaster error. */
#define SCCB_PARITY_ERR 0x34 /* SCSI parity error */
#define SCCB_INVALID_DIRECTION 0x18 /* Invalid target direction */
#define SCCB_DUPLICATE_SCCB 0x19 /* Duplicate SCCB */
#define SCCB_SCSI_RST 0x35 /* SCSI RESET detected. */
#define SCCB_IN_PROCESS 0x00
#define SCCB_SUCCESS 0x01
#define SCCB_ABORT 0x02
#define SCCB_NOT_FOUND 0x03
#define SCCB_ERROR 0x04
#define SCCB_INVALID 0x05
#define SCCB_SIZE sizeof(SCCB)
#define ORION_FW_REV 3110
#define HARP_REVD 1
#define QUEUE_DEPTH 254+1 /*1 for Normal disconnect 32 for Q'ing. */
#define MAX_MB_CARDS 4 /* Max. no of cards suppoerted on Mother Board */
#define WIDE_SCSI 1
#define MAX_SCSI_TAR 16
#define MAX_LUN 32
#define LUN_MASK 0x1f
#if defined(HARP_REVA)
#define SG_BUF_CNT 15 /*Number of prefetched elements. */
#else
#define SG_BUF_CNT 16 /*Number of prefetched elements. */
#endif
#define SG_ELEMENT_SIZE 8 /*Eight byte per element. */
#define SG_LOCAL_MASK 0x00000000L
#define SG_ELEMENT_MASK 0xFFFFFFFFL
#define RD_HARPOON(ioport) OS_InPortByte((u32bits)ioport)
#define RDW_HARPOON(ioport) OS_InPortWord((u32bits)ioport)
#define RD_HARP32(ioport,offset,data) (data = OS_InPortLong((u32bits)(ioport + offset)))
#define WR_HARPOON(ioport,val) OS_OutPortByte((u32bits)ioport,(u08bits) val)
#define WRW_HARPOON(ioport,val) OS_OutPortWord((u32bits)ioport,(u16bits)val)
#define WR_HARP32(ioport,offset,data) OS_OutPortLong((u32bits)(ioport + offset), data)
#define TAR_SYNC_MASK (BIT(7)+BIT(6))
#define SYNC_UNKNOWN 0x00
#define SYNC_TRYING BIT(6)
#define SYNC_SUPPORTED (BIT(7)+BIT(6))
#define TAR_WIDE_MASK (BIT(5)+BIT(4))
#define WIDE_DISABLED 0x00
#define WIDE_ENABLED BIT(4)
#define WIDE_NEGOCIATED BIT(5)
#define TAR_TAG_Q_MASK (BIT(3)+BIT(2))
#define TAG_Q_UNKNOWN 0x00
#define TAG_Q_TRYING BIT(2)
#define TAG_Q_REJECT BIT(3)
#define TAG_Q_SUPPORTED (BIT(3)+BIT(2))
#define TAR_ALLOW_DISC BIT(0)
#define EE_SYNC_MASK (BIT(0)+BIT(1))
#define EE_SYNC_ASYNC 0x00
#define EE_SYNC_5MB BIT(0)
#define EE_SYNC_10MB BIT(1)
#define EE_SYNC_20MB (BIT(0)+BIT(1))
#define EE_ALLOW_DISC BIT(6)
#define EE_WIDE_SCSI BIT(7)
typedef struct SCCBMgr_tar_info *PSCCBMgr_tar_info;
typedef struct SCCBMgr_tar_info {
PSCCB TarSelQ_Head;
PSCCB TarSelQ_Tail;
UCHAR TarLUN_CA; /*Contingent Allgiance */
UCHAR TarTagQ_Cnt;
UCHAR TarSelQ_Cnt;
UCHAR TarStatus;
UCHAR TarEEValue;
UCHAR TarSyncCtrl;
UCHAR TarReserved[2]; /* for alignment */
UCHAR LunDiscQ_Idx[MAX_LUN];
UCHAR TarLUNBusy[MAX_LUN];
} SCCBMGR_TAR_INFO;
typedef struct NVRAMInfo {
UCHAR niModel; /* Model No. of card */
UCHAR niCardNo; /* Card no. */
ULONG niBaseAddr; /* Port Address of card */
UCHAR niSysConf; /* Adapter Configuration byte - Byte 16 of eeprom map */
UCHAR niScsiConf; /* SCSI Configuration byte - Byte 17 of eeprom map */
UCHAR niScamConf; /* SCAM Configuration byte - Byte 20 of eeprom map */
UCHAR niAdapId; /* Host Adapter ID - Byte 24 of eerpom map */
UCHAR niSyncTbl[MAX_SCSI_TAR / 2]; /* Sync/Wide byte of targets */
UCHAR niScamTbl[MAX_SCSI_TAR][4]; /* Compressed Scam name string of Targets */
}NVRAMINFO;
typedef NVRAMINFO *PNVRamInfo;
#define MODEL_LT 1
#define MODEL_DL 2
#define MODEL_LW 3
#define MODEL_DW 4
typedef struct SCCBcard {
PSCCB currentSCCB;
PSCCBMGR_INFO cardInfo;
ULONG ioPort;
USHORT cmdCounter;
UCHAR discQCount;
UCHAR tagQ_Lst;
UCHAR cardIndex;
UCHAR scanIndex;
UCHAR globalFlags;
UCHAR ourId;
PNVRamInfo pNvRamInfo;
PSCCB discQ_Tbl[QUEUE_DEPTH];
}SCCBCARD;
typedef struct SCCBcard *PSCCBcard;
#define F_TAG_STARTED 0x01
#define F_CONLUN_IO 0x02
#define F_DO_RENEGO 0x04
#define F_NO_FILTER 0x08
#define F_GREEN_PC 0x10
#define F_HOST_XFER_ACT 0x20
#define F_NEW_SCCB_CMD 0x40
#define F_UPDATE_EEPROM 0x80
#define ID_STRING_LENGTH 32
#define TYPE_CODE0 0x63 /*Level2 Mstr (bits 7-6), */
#define TYPE_CODE1 00 /*No ID yet */
#define SLV_TYPE_CODE0 0xA3 /*Priority Bit set (bits 7-6), */
#define ASSIGN_ID 0x00
#define SET_P_FLAG 0x01
#define CFG_CMPLT 0x03
#define DOM_MSTR 0x0F
#define SYNC_PTRN 0x1F
#define ID_0_7 0x18
#define ID_8_F 0x11
#define ID_10_17 0x12
#define ID_18_1F 0x0B
#define MISC_CODE 0x14
#define CLR_P_FLAG 0x18
#define LOCATE_ON 0x12
#define LOCATE_OFF 0x0B
#define LVL_1_MST 0x00
#define LVL_2_MST 0x40
#define DOM_LVL_2 0xC0
#define INIT_SELTD 0x01
#define LEVEL2_TAR 0x02
enum scam_id_st { ID0,ID1,ID2,ID3,ID4,ID5,ID6,ID7,ID8,ID9,ID10,ID11,ID12,
ID13,ID14,ID15,ID_UNUSED,ID_UNASSIGNED,ID_ASSIGNED,LEGACY,
CLR_PRIORITY,NO_ID_AVAIL };
typedef struct SCCBscam_info {
UCHAR id_string[ID_STRING_LENGTH];
enum scam_id_st state;
} SCCBSCAM_INFO, *PSCCBSCAM_INFO;
#define SCSI_TEST_UNIT_READY 0x00
#define SCSI_REZERO_UNIT 0x01
#define SCSI_REQUEST_SENSE 0x03
#define SCSI_FORMAT_UNIT 0x04
#define SCSI_REASSIGN 0x07
#define SCSI_READ 0x08
#define SCSI_WRITE 0x0A
#define SCSI_SEEK 0x0B
#define SCSI_INQUIRY 0x12
#define SCSI_MODE_SELECT 0x15
#define SCSI_RESERVE_UNIT 0x16
#define SCSI_RELEASE_UNIT 0x17
#define SCSI_MODE_SENSE 0x1A
#define SCSI_START_STOP_UNIT 0x1B
#define SCSI_SEND_DIAGNOSTIC 0x1D
#define SCSI_READ_CAPACITY 0x25
#define SCSI_READ_EXTENDED 0x28
#define SCSI_WRITE_EXTENDED 0x2A
#define SCSI_SEEK_EXTENDED 0x2B
#define SCSI_WRITE_AND_VERIFY 0x2E
#define SCSI_VERIFY 0x2F
#define SCSI_READ_DEFECT_DATA 0x37
#define SCSI_WRITE_BUFFER 0x3B
#define SCSI_READ_BUFFER 0x3C
#define SCSI_RECV_DIAGNOSTIC 0x1C
#define SCSI_READ_LONG 0x3E
#define SCSI_WRITE_LONG 0x3F
#define SCSI_LAST_SCSI_CMND SCSI_WRITE_LONG
#define SCSI_INVALID_CMND 0xFF
#define SSGOOD 0x00
#define SSCHECK 0x02
#define SSCOND_MET 0x04
#define SSBUSY 0x08
#define SSRESERVATION_CONFLICT 0x18
#define SSCMD_TERM 0x22
#define SSQ_FULL 0x28
#define SKNO_SEN 0x00
#define SKRECOV_ERR 0x01
#define SKNOT_RDY 0x02
#define SKMED_ERR 0x03
#define SKHW_ERR 0x04
#define SKILL_REQ 0x05
#define SKUNIT_ATTN 0x06
#define SKDATA_PROTECT 0x07
#define SKBLNK_CHK 0x08
#define SKCPY_ABORT 0x0A
#define SKABORT_CMD 0x0B
#define SKEQUAL 0x0C
#define SKVOL_OVF 0x0D
#define SKMIS_CMP 0x0E
#define SMCMD_COMP 0x00
#define SMEXT 0x01
#define SMSAVE_DATA_PTR 0x02
#define SMREST_DATA_PTR 0x03
#define SMDISC 0x04
#define SMINIT_DETEC_ERR 0x05
#define SMABORT 0x06
#define SMREJECT 0x07
#define SMNO_OP 0x08
#define SMPARITY 0x09
#define SMDEV_RESET 0x0C
#define SMABORT_TAG 0x0D
#define SMINIT_RECOVERY 0x0F
#define SMREL_RECOVERY 0x10
#define SMIDENT 0x80
#define DISC_PRIV 0x40
#define SMSYNC 0x01
#define SM10MBS 0x19 /* 100ns */
#define SM5MBS 0x32 /* 200ns */
#define SMOFFSET 0x0F /* Maxoffset value */
#define SMWDTR 0x03
#define SM8BIT 0x00
#define SM16BIT 0x01
#define SM32BIT 0x02
#define SMIGNORWR 0x23 /* Ignore Wide Residue */
#define ARBITRATION_DELAY 0x01 /* 2.4us using a 40Mhz clock */
#define BUS_SETTLE_DELAY 0x01 /* 400ns */
#define BUS_CLEAR_DELAY 0x01 /* 800ns */
#define SPHASE_TO 0x0A /* 10 second timeout waiting for */
#define SCMD_TO 0x0F /* Overall command timeout */
#define SIX_BYTE_CMD 0x06
#define TEN_BYTE_CMD 0x0A
#define TWELVE_BYTE_CMD 0x0C
#define ASYNC 0x00
#define PERI25NS 0x06 /* 25/4ns to next clock for xbow. */
#define SYNC10MBS 0x19
#define SYNC5MBS 0x32
#define MAX_OFFSET 0x0F /* Maxbyteoffset for Sync Xfers */
#define EEPROM_WD_CNT 256
#define EEPROM_CHECK_SUM 0
#define FW_SIGNATURE 2
#define MODEL_NUMB_0 4
#define MODEL_NUMB_1 5
#define MODEL_NUMB_2 6
#define MODEL_NUMB_3 7
#define MODEL_NUMB_4 8
#define MODEL_NUMB_5 9
#define IO_BASE_ADDR 10
#define IRQ_NUMBER 12
#define PCI_INT_PIN 13
#define BUS_DELAY 14 /*On time in byte 14 off delay in 15 */
#define SYSTEM_CONFIG 16
#define SCSI_CONFIG 17
#define BIOS_CONFIG 18
#define SPIN_UP_DELAY 19
#define SCAM_CONFIG 20
#define ADAPTER_SCSI_ID 24
#define IGNORE_B_SCAN 32
#define SEND_START_ENA 34
#define DEVICE_ENABLE 36
#define SYNC_RATE_TBL 38
#define SYNC_RATE_TBL01 38
#define SYNC_RATE_TBL23 40
#define SYNC_RATE_TBL45 42
#define SYNC_RATE_TBL67 44
#define SYNC_RATE_TBL89 46
#define SYNC_RATE_TBLab 48
#define SYNC_RATE_TBLcd 50
#define SYNC_RATE_TBLef 52
#define EE_SCAMBASE 256
#define DOM_MASTER (BIT(0) + BIT(1))
#define SCAM_ENABLED BIT(2)
#define SCAM_LEVEL2 BIT(3)
#define RENEGO_ENA BITW(10)
#define CONNIO_ENA BITW(11)
#define GREEN_PC_ENA BITW(12)
#define AUTO_RATE_00 00
#define AUTO_RATE_05 01
#define AUTO_RATE_10 02
#define AUTO_RATE_20 03
#define WIDE_NEGO_BIT BIT(7)
#define DISC_ENABLE_BIT BIT(6)
#define hp_vendor_id_0 0x00 /* LSB */
#define ORION_VEND_0 0x4B
#define hp_vendor_id_1 0x01 /* MSB */
#define ORION_VEND_1 0x10
#define hp_device_id_0 0x02 /* LSB */
#define ORION_DEV_0 0x30
#define hp_device_id_1 0x03 /* MSB */
#define ORION_DEV_1 0x81
/* Sub Vendor ID and Sub Device ID only available in
Harpoon Version 2 and higher */
#define hp_sub_vendor_id_0 0x04 /* LSB */
#define hp_sub_vendor_id_1 0x05 /* MSB */
#define hp_sub_device_id_0 0x06 /* LSB */
#define hp_sub_device_id_1 0x07 /* MSB */
#define hp_dual_addr_lo 0x08
#define hp_dual_addr_lmi 0x09
#define hp_dual_addr_hmi 0x0A
#define hp_dual_addr_hi 0x0B
#define hp_semaphore 0x0C
#define SCCB_MGR_ACTIVE BIT(0)
#define TICKLE_ME BIT(1)
#define SCCB_MGR_PRESENT BIT(3)
#define BIOS_IN_USE BIT(4)
#define hp_user_defined_D 0x0D
#define hp_reserved_E 0x0E
#define hp_sys_ctrl 0x0F
#define STOP_CLK BIT(0) /*Turn off BusMaster Clock */
#define DRVR_RST BIT(1) /*Firmware Reset to 80C15 chip */
#define HALT_MACH BIT(3) /*Halt State Machine */
#define HARD_ABORT BIT(4) /*Hard Abort */
#define DIAG_MODE BIT(5) /*Diagnostic Mode */
#define BM_ABORT_TMOUT 0x50 /*Halt State machine time out */
#define hp_sys_cfg 0x10
#define DONT_RST_FIFO BIT(7) /*Don't reset FIFO */
#define hp_host_ctrl0 0x11
#define DUAL_ADDR_MODE BIT(0) /*Enable 64-bit addresses */
#define IO_MEM_SPACE BIT(1) /*I/O Memory Space */
#define RESOURCE_LOCK BIT(2) /*Enable Resource Lock */
#define IGNOR_ACCESS_ERR BIT(3) /*Ignore Access Error */
#define HOST_INT_EDGE BIT(4) /*Host interrupt level/edge mode sel */
#define SIX_CLOCKS BIT(5) /*6 Clocks between Strobe */
#define DMA_EVEN_PARITY BIT(6) /*Enable DMA Enen Parity */
/*
#define BURST_MODE BIT(0)
*/
#define hp_reserved_12 0x12
#define hp_host_blk_cnt 0x13
#define XFER_BLK1 0x00 /* 0 0 0 1 byte per block*/
#define XFER_BLK2 0x01 /* 0 0 1 2 byte per block*/
#define XFER_BLK4 0x02 /* 0 1 0 4 byte per block*/
#define XFER_BLK8 0x03 /* 0 1 1 8 byte per block*/
#define XFER_BLK16 0x04 /* 1 0 0 16 byte per block*/
#define XFER_BLK32 0x05 /* 1 0 1 32 byte per block*/
#define XFER_BLK64 0x06 /* 1 1 0 64 byte per block*/
#define BM_THRESHOLD 0x40 /* PCI mode can only xfer 16 bytes*/
#define hp_reserved_14 0x14
#define hp_reserved_15 0x15
#define hp_reserved_16 0x16
#define hp_int_mask 0x17
#define INT_CMD_COMPL BIT(0) /* DMA command complete */
#define INT_EXT_STATUS BIT(1) /* Extended Status Set */
#define INT_SCSI BIT(2) /* Scsi block interrupt */
#define INT_FIFO_RDY BIT(4) /* FIFO data ready */
#define hp_xfer_cnt_lo 0x18
#define hp_xfer_cnt_mi 0x19
#define hp_xfer_cnt_hi 0x1A
#define hp_xfer_cmd 0x1B
#define XFER_HOST_DMA 0x00 /* 0 0 0 Transfer Host -> DMA */
#define XFER_DMA_HOST 0x01 /* 0 0 1 Transfer DMA -> Host */
#define XFER_HOST_MPU 0x02 /* 0 1 0 Transfer Host -> MPU */
#define XFER_MPU_HOST 0x03 /* 0 1 1 Transfer MPU -> Host */
#define XFER_DMA_MPU 0x04 /* 1 0 0 Transfer DMA -> MPU */
#define XFER_MPU_DMA 0x05 /* 1 0 1 Transfer MPU -> DMA */
#define SET_SEMAPHORE 0x06 /* 1 1 0 Set Semaphore */
#define XFER_NOP 0x07 /* 1 1 1 Transfer NOP */
#define XFER_MB_MPU 0x06 /* 1 1 0 Transfer MB -> MPU */
#define XFER_MB_DMA 0x07 /* 1 1 1 Transfer MB -> DMA */
#define XFER_HOST_AUTO 0x00 /* 0 0 Auto Transfer Size */
#define XFER_HOST_8BIT 0x08 /* 0 1 8 BIT Transfer Size */
#define XFER_HOST_16BIT 0x10 /* 1 0 16 BIT Transfer Size */
#define XFER_HOST_32BIT 0x18 /* 1 1 32 BIT Transfer Size */
#define XFER_DMA_8BIT 0x20 /* 0 1 8 BIT Transfer Size */
#define XFER_DMA_16BIT 0x40 /* 1 0 16 BIT Transfer Size */
#define DISABLE_INT BIT(7) /*Do not interrupt at end of cmd. */
#define HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_8BIT))
#define HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_8BIT))
#define WIDE_HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_16BIT))
#define WIDE_HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_16BIT))
#define hp_host_addr_lo 0x1C
#define hp_host_addr_lmi 0x1D
#define hp_host_addr_hmi 0x1E
#define hp_host_addr_hi 0x1F
#define hp_pio_data 0x20
#define hp_reserved_21 0x21
#define hp_ee_ctrl 0x22
#define EXT_ARB_ACK BIT(7)
#define SCSI_TERM_ENA_H BIT(6) /* SCSI high byte terminator */
#define SEE_MS BIT(5)
#define SEE_CS BIT(3)
#define SEE_CLK BIT(2)
#define SEE_DO BIT(1)
#define SEE_DI BIT(0)
#define EE_READ 0x06
#define EE_WRITE 0x05
#define EWEN 0x04
#define EWEN_ADDR 0x03C0
#define EWDS 0x04
#define EWDS_ADDR 0x0000
#define hp_brdctl 0x23
#define DAT_7 BIT(7)
#define DAT_6 BIT(6)
#define DAT_5 BIT(5)
#define BRD_STB BIT(4)
#define BRD_CS BIT(3)
#define BRD_WR BIT(2)
#define hp_reserved_24 0x24
#define hp_reserved_25 0x25
#define hp_bm_ctrl 0x26
#define SCSI_TERM_ENA_L BIT(0) /*Enable/Disable external terminators */
#define FLUSH_XFER_CNTR BIT(1) /*Flush transfer counter */
#define BM_XFER_MIN_8 BIT(2) /*Enable bus master transfer of 9 */
#define BIOS_ENA BIT(3) /*Enable BIOS/FLASH Enable */
#define FORCE1_XFER BIT(5) /*Always xfer one byte in byte mode */
#define FAST_SINGLE BIT(6) /*?? */
#define BMCTRL_DEFAULT (FORCE1_XFER|FAST_SINGLE|SCSI_TERM_ENA_L)
#define hp_reserved_27 0x27
#define hp_sg_addr 0x28
#define hp_page_ctrl 0x29
#define SCATTER_EN BIT(0)
#define SGRAM_ARAM BIT(1)
#define BIOS_SHADOW BIT(2)
#define G_INT_DISABLE BIT(3) /* Enable/Disable all Interrupts */
#define NARROW_SCSI_CARD BIT(4) /* NARROW/WIDE SCSI config pin */
#define hp_reserved_2A 0x2A
#define hp_pci_cmd_cfg 0x2B
#define IO_SPACE_ENA BIT(0) /*enable I/O space */
#define MEM_SPACE_ENA BIT(1) /*enable memory space */
#define BUS_MSTR_ENA BIT(2) /*enable bus master operation */
#define MEM_WI_ENA BIT(4) /*enable Write and Invalidate */
#define PAR_ERR_RESP BIT(6) /*enable parity error responce. */
#define hp_reserved_2C 0x2C
#define hp_pci_stat_cfg 0x2D
#define DATA_PARITY_ERR BIT(0)
#define REC_TARGET_ABORT BIT(4) /*received Target abort */
#define REC_MASTER_ABORT BIT(5) /*received Master abort */
#define SIG_SYSTEM_ERR BIT(6)
#define DETECTED_PAR_ERR BIT(7)
#define hp_reserved_2E 0x2E
#define hp_sys_status 0x2F
#define SLV_DATA_RDY BIT(0) /*Slave data ready */
#define XFER_CNT_ZERO BIT(1) /*Transfer counter = 0 */
#define BM_FIFO_EMPTY BIT(2) /*FIFO empty */
#define BM_FIFO_FULL BIT(3) /*FIFO full */
#define HOST_OP_DONE BIT(4) /*host operation done */
#define DMA_OP_DONE BIT(5) /*DMA operation done */
#define SLV_OP_DONE BIT(6) /*Slave operation done */
#define PWR_ON_FLAG BIT(7) /*Power on flag */
#define hp_reserved_30 0x30
#define hp_host_status0 0x31
#define HOST_TERM BIT(5) /*Host Terminal Count */
#define HOST_TRSHLD BIT(6) /*Host Threshold */
#define CONNECTED_2_HOST BIT(7) /*Connected to Host */
#define hp_reserved_32 0x32
#define hp_rev_num 0x33
#define REV_A_CONST 0x0E
#define REV_B_CONST 0x0E
#define hp_stack_data 0x34
#define hp_stack_addr 0x35
#define hp_ext_status 0x36
#define BM_FORCE_OFF BIT(0) /*Bus Master is forced to get off */
#define PCI_TGT_ABORT BIT(0) /*PCI bus master transaction aborted */
#define PCI_DEV_TMOUT BIT(1) /*PCI Device Time out */
#define FIFO_TC_NOT_ZERO BIT(2) /*FIFO or transfer counter not zero */
#define CHIP_RST_OCCUR BIT(3) /*Chip reset occurs */
#define CMD_ABORTED BIT(4) /*Command aborted */
#define BM_PARITY_ERR BIT(5) /*parity error on data received */
#define PIO_OVERRUN BIT(6) /*Slave data overrun */
#define BM_CMD_BUSY BIT(7) /*Bus master transfer command busy */
#define BAD_EXT_STATUS (BM_FORCE_OFF | PCI_DEV_TMOUT | CMD_ABORTED | \
BM_PARITY_ERR | PIO_OVERRUN)
#define hp_int_status 0x37
#define BM_CMD_CMPL BIT(0) /*Bus Master command complete */
#define EXT_STATUS_ON BIT(1) /*Extended status is valid */
#define SCSI_INTERRUPT BIT(2) /*Global indication of a SCSI int. */
#define BM_FIFO_RDY BIT(4)
#define INT_ASSERTED BIT(5) /* */
#define SRAM_BUSY BIT(6) /*Scatter/Gather RAM busy */
#define CMD_REG_BUSY BIT(7)
#define hp_fifo_cnt 0x38
#define hp_curr_host_cnt 0x39
#define hp_reserved_3A 0x3A
#define hp_fifo_in_addr 0x3B
#define hp_fifo_out_addr 0x3C
#define hp_reserved_3D 0x3D
#define hp_reserved_3E 0x3E
#define hp_reserved_3F 0x3F
#define hp_intena 0x40
#define RESET BITW(7)
#define PROG_HLT BITW(6)
#define PARITY BITW(5)
#define FIFO BITW(4)
#define SEL BITW(3)
#define SCAM_SEL BITW(2)
#define RSEL BITW(1)
#define TIMEOUT BITW(0)
#define BUS_FREE BITW(15)
#define XFER_CNT_0 BITW(14)
#define PHASE BITW(13)
#define IUNKWN BITW(12)
#define ICMD_COMP BITW(11)
#define ITICKLE BITW(10)
#define IDO_STRT BITW(9)
#define ITAR_DISC BITW(8)
#define AUTO_INT (BITW(12)+BITW(11)+BITW(10)+BITW(9)+BITW(8))
#define CLR_ALL_INT 0xFFFF
#define CLR_ALL_INT_1 0xFF00
#define hp_intstat 0x42
#define hp_scsisig 0x44
#define SCSI_SEL BIT(7)
#define SCSI_BSY BIT(6)
#define SCSI_REQ BIT(5)
#define SCSI_ACK BIT(4)
#define SCSI_ATN BIT(3)
#define SCSI_CD BIT(2)
#define SCSI_MSG BIT(1)
#define SCSI_IOBIT BIT(0)
#define S_SCSI_PHZ (BIT(2)+BIT(1)+BIT(0))
#define S_CMD_PH (BIT(2) )
#define S_MSGO_PH (BIT(2)+BIT(1) )
#define S_STAT_PH (BIT(2) +BIT(0))
#define S_MSGI_PH (BIT(2)+BIT(1)+BIT(0))
#define S_DATAI_PH ( BIT(0))
#define S_DATAO_PH 0x00
#define S_ILL_PH ( BIT(1) )
#define hp_scsictrl_0 0x45
#define NO_ARB BIT(7)
#define SEL_TAR BIT(6)
#define ENA_ATN BIT(4)
#define ENA_RESEL BIT(2)
#define SCSI_RST BIT(1)
#define ENA_SCAM_SEL BIT(0)
#define hp_portctrl_0 0x46
#define SCSI_PORT BIT(7)
#define SCSI_INBIT BIT(6)
#define DMA_PORT BIT(5)
#define DMA_RD BIT(4)
#define HOST_PORT BIT(3)
#define HOST_WRT BIT(2)
#define SCSI_BUS_EN BIT(1)
#define START_TO BIT(0)
#define hp_scsireset 0x47
#define SCSI_TAR BIT(7)
#define SCSI_INI BIT(6)
#define SCAM_EN BIT(5)
#define ACK_HOLD BIT(4)
#define DMA_RESET BIT(3)
#define HPSCSI_RESET BIT(2)
#define PROG_RESET BIT(1)
#define FIFO_CLR BIT(0)
#define hp_xfercnt_0 0x48
#define hp_xfercnt_1 0x49
#define hp_xfercnt_2 0x4A
#define hp_xfercnt_3 0x4B
#define hp_fifodata_0 0x4C
#define hp_fifodata_1 0x4D
#define hp_addstat 0x4E
#define SCAM_TIMER BIT(7)
#define AUTO_RUNNING BIT(6)
#define FAST_SYNC BIT(5)
#define SCSI_MODE8 BIT(3)
#define SCSI_PAR_ERR BIT(0)
#define hp_prgmcnt_0 0x4F
#define AUTO_PC_MASK 0x3F
#define hp_selfid_0 0x50
#define hp_selfid_1 0x51
#define hp_arb_id 0x52
#define ARB_ID (BIT(3) + BIT(2) + BIT(1) + BIT(0))
#define hp_select_id 0x53
#define RESEL_ID (BIT(7) + BIT(6) + BIT(5) + BIT(4))
#define SELECT_ID (BIT(3) + BIT(2) + BIT(1) + BIT(0))
#define hp_synctarg_base 0x54
#define hp_synctarg_12 0x54
#define hp_synctarg_13 0x55
#define hp_synctarg_14 0x56
#define hp_synctarg_15 0x57
#define hp_synctarg_8 0x58
#define hp_synctarg_9 0x59
#define hp_synctarg_10 0x5A
#define hp_synctarg_11 0x5B
#define hp_synctarg_4 0x5C
#define hp_synctarg_5 0x5D
#define hp_synctarg_6 0x5E
#define hp_synctarg_7 0x5F
#define hp_synctarg_0 0x60
#define hp_synctarg_1 0x61
#define hp_synctarg_2 0x62
#define hp_synctarg_3 0x63
#define RATE_20MB 0x00
#define RATE_10MB ( BIT(5))
#define RATE_6_6MB ( BIT(6) )
#define RATE_5MB ( BIT(6)+BIT(5))
#define RATE_4MB (BIT(7) )
#define RATE_3_33MB (BIT(7) +BIT(5))
#define RATE_2_85MB (BIT(7)+BIT(6) )
#define RATE_2_5MB (BIT(7)+BIT(5)+BIT(6))
#define NEXT_CLK BIT(5)
#define SLOWEST_SYNC (BIT(7)+BIT(6)+BIT(5))
#define NARROW_SCSI BIT(4)
#define SYNC_OFFSET (BIT(3) + BIT(2) + BIT(1) + BIT(0))
#define DEFAULT_ASYNC 0x00
#define DEFAULT_OFFSET 0x0F
#define hp_autostart_0 0x64
#define hp_autostart_1 0x65
#define hp_autostart_2 0x66
#define hp_autostart_3 0x67
#define DISABLE 0x00
#define AUTO_IMMED BIT(5)
#define SELECT BIT(6)
#define RESELECT (BIT(6)+BIT(5))
#define BUSFREE BIT(7)
#define XFER_0 (BIT(7)+BIT(5))
#define END_DATA (BIT(7)+BIT(6))
#define MSG_PHZ (BIT(7)+BIT(6)+BIT(5))
#define hp_gp_reg_0 0x68
#define hp_gp_reg_1 0x69
#define hp_gp_reg_2 0x6A
#define hp_gp_reg_3 0x6B
#define hp_seltimeout 0x6C
#define TO_2ms 0x54 /* 2.0503ms */
#define TO_4ms 0x67 /* 3.9959ms */
#define TO_5ms 0x03 /* 4.9152ms */
#define TO_10ms 0x07 /* 11.xxxms */
#define TO_250ms 0x99 /* 250.68ms */
#define TO_290ms 0xB1 /* 289.99ms */
#define TO_350ms 0xD6 /* 350.62ms */
#define TO_417ms 0xFF /* 417.79ms */
#define hp_clkctrl_0 0x6D
#define PWR_DWN BIT(6)
#define ACTdeassert BIT(4)
#define ATNonErr BIT(3)
#define CLK_30MHZ BIT(1)
#define CLK_40MHZ (BIT(1) + BIT(0))
#define CLK_50MHZ BIT(2)
#define CLKCTRL_DEFAULT (ACTdeassert | CLK_40MHZ)
#define hp_fiforead 0x6E
#define hp_fifowrite 0x6F
#define hp_offsetctr 0x70
#define hp_xferstat 0x71
#define FIFO_FULL BIT(7)
#define FIFO_EMPTY BIT(6)
#define FIFO_MASK 0x3F /* Mask for the FIFO count value. */
#define FIFO_LEN 0x20
#define hp_portctrl_1 0x72
#define EVEN_HOST_P BIT(5)
#define INVT_SCSI BIT(4)
#define CHK_SCSI_P BIT(3)
#define HOST_MODE8 BIT(0)
#define HOST_MODE16 0x00
#define hp_xfer_pad 0x73
#define ID_UNLOCK BIT(3)
#define XFER_PAD BIT(2)
#define hp_scsidata_0 0x74
#define hp_scsidata_1 0x75
#define hp_timer_0 0x76
#define hp_timer_1 0x77
#define hp_reserved_78 0x78
#define hp_reserved_79 0x79
#define hp_reserved_7A 0x7A
#define hp_reserved_7B 0x7B
#define hp_reserved_7C 0x7C
#define hp_reserved_7D 0x7D
#define hp_reserved_7E 0x7E
#define hp_reserved_7F 0x7F
#define hp_aramBase 0x80
#define BIOS_DATA_OFFSET 0x60
#define BIOS_RELATIVE_CARD 0x64
#define AUTO_LEN 0x80
#define AR0 0x00
#define AR1 BITW(8)
#define AR2 BITW(9)
#define AR3 (BITW(9) + BITW(8))
#define SDATA BITW(10)
#define NOP_OP 0x00 /* Nop command */
#define CRD_OP BITW(11) /* Cmp Reg. w/ Data */
#define CRR_OP BITW(12) /* Cmp Reg. w. Reg. */
#define CBE_OP (BITW(14)+BITW(12)+BITW(11)) /* Cmp SCSI cmd class & Branch EQ */
#define CBN_OP (BITW(14)+BITW(13)) /* Cmp SCSI cmd class & Branch NOT EQ */
#define CPE_OP (BITW(14)+BITW(11)) /* Cmp SCSI phs & Branch EQ */
#define CPN_OP (BITW(14)+BITW(12)) /* Cmp SCSI phs & Branch NOT EQ */
#define ADATA_OUT 0x00
#define ADATA_IN BITW(8)
#define ACOMMAND BITW(10)
#define ASTATUS (BITW(10)+BITW(8))
#define AMSG_OUT (BITW(10)+BITW(9))
#define AMSG_IN (BITW(10)+BITW(9)+BITW(8))
#define AILLEGAL (BITW(9)+BITW(8))
#define BRH_OP BITW(13) /* Branch */
#define ALWAYS 0x00
#define EQUAL BITW(8)
#define NOT_EQ BITW(9)
#define TCB_OP (BITW(13)+BITW(11)) /* Test condition & branch */
#define ATN_SET BITW(8)
#define ATN_RESET BITW(9)
#define XFER_CNT (BITW(9)+BITW(8))
#define FIFO_0 BITW(10)
#define FIFO_NOT0 (BITW(10)+BITW(8))
#define T_USE_SYNC0 (BITW(10)+BITW(9))
#define MPM_OP BITW(15) /* Match phase and move data */
#define MDR_OP (BITW(12)+BITW(11)) /* Move data to Reg. */
#define MRR_OP BITW(14) /* Move DReg. to Reg. */
#define S_IDREG (BIT(2)+BIT(1)+BIT(0))
#define D_AR0 0x00
#define D_AR1 BIT(0)
#define D_AR2 BIT(1)
#define D_AR3 (BIT(1) + BIT(0))
#define D_SDATA BIT(2)
#define D_BUCKET (BIT(2) + BIT(1) + BIT(0))
#define ADR_OP (BITW(13)+BITW(12)) /* Logical AND Reg. w. Data */
#define ADS_OP (BITW(14)+BITW(13)+BITW(12))
#define ODR_OP (BITW(13)+BITW(12)+BITW(11))
#define ODS_OP (BITW(14)+BITW(13)+BITW(12)+BITW(11))
#define STR_OP (BITW(15)+BITW(14)) /* Store to A_Reg. */
#define AINT_ENA1 0x00
#define AINT_STAT1 BITW(8)
#define ASCSI_SIG BITW(9)
#define ASCSI_CNTL (BITW(9)+BITW(8))
#define APORT_CNTL BITW(10)
#define ARST_CNTL (BITW(10)+BITW(8))
#define AXFERCNT0 (BITW(10)+BITW(9))
#define AXFERCNT1 (BITW(10)+BITW(9)+BITW(8))
#define AXFERCNT2 BITW(11)
#define AFIFO_DATA (BITW(11)+BITW(8))
#define ASCSISELID (BITW(11)+BITW(9))
#define ASCSISYNC0 (BITW(11)+BITW(9)+BITW(8))
#define RAT_OP (BITW(14)+BITW(13)+BITW(11))
#define SSI_OP (BITW(15)+BITW(11))
#define SSI_ITAR_DISC (ITAR_DISC >> 8)
#define SSI_IDO_STRT (IDO_STRT >> 8)
#define SSI_IDI_STRT (IDO_STRT >> 8)
#define SSI_ICMD_COMP (ICMD_COMP >> 8)
#define SSI_ITICKLE (ITICKLE >> 8)
#define SSI_IUNKWN (IUNKWN >> 8)
#define SSI_INO_CC (IUNKWN >> 8)
#define SSI_IRFAIL (IUNKWN >> 8)
#define NP 0x10 /*Next Phase */
#define NTCMD 0x02 /*Non- Tagged Command start */
#define CMDPZ 0x04 /*Command phase */
#define DINT 0x12 /*Data Out/In interrupt */
#define DI 0x13 /*Data Out */
#define MI 0x14 /*Message In */
#define DC 0x19 /*Disconnect Message */
#define ST 0x1D /*Status Phase */
#define UNKNWN 0x24 /*Unknown bus action */
#define CC 0x25 /*Command Completion failure */
#define TICK 0x26 /*New target reselected us. */
#define RFAIL 0x27 /*Reselection failed */
#define SELCHK 0x28 /*Select & Check SCSI ID latch reg */
#define ID_MSG_STRT hp_aramBase + 0x00
#define NON_TAG_ID_MSG hp_aramBase + 0x06
#define CMD_STRT hp_aramBase + 0x08
#define SYNC_MSGS hp_aramBase + 0x08
#define TAG_STRT 0x00
#define SELECTION_START 0x00
#define DISCONNECT_START 0x10/2
#define END_DATA_START 0x14/2
#define NONTAG_STRT 0x02/2
#define CMD_ONLY_STRT CMDPZ/2
#define TICKLE_STRT TICK/2
#define SELCHK_STRT SELCHK/2
#define mEEPROM_CLK_DELAY(port) (RD_HARPOON(port+hp_intstat_1))
#define mWAIT_10MS(port) (RD_HARPOON(port+hp_intstat_1))
#define CLR_XFER_CNT(port) (WR_HARPOON(port+hp_xfercnt_0, 0x00))
#define SET_XFER_CNT(port, data) (WR_HARP32(port,hp_xfercnt_0,data))
#define GET_XFER_CNT(port, xfercnt) {RD_HARP32(port,hp_xfercnt_0,xfercnt); xfercnt &= 0xFFFFFF;}
/* #define GET_XFER_CNT(port, xfercnt) (xfercnt = RD_HARPOON(port+hp_xfercnt_2), \
xfercnt <<= 16,\
xfercnt |= RDW_HARPOON((USHORT)(port+hp_xfercnt_0)))
*/
#define HP_SETUP_ADDR_CNT(port,addr,count) (WRW_HARPOON((port+hp_host_addr_lo), (USHORT)(addr & 0x0000FFFFL)),\
addr >>= 16,\
WRW_HARPOON((port+hp_host_addr_hmi), (USHORT)(addr & 0x0000FFFFL)),\
WR_HARP32(port,hp_xfercnt_0,count),\
WRW_HARPOON((port+hp_xfer_cnt_lo), (USHORT)(count & 0x0000FFFFL)),\
count >>= 16,\
WR_HARPOON(port+hp_xfer_cnt_hi, (count & 0xFF)))
#define ACCEPT_MSG(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
WR_HARPOON(port+hp_scsisig, S_ILL_PH);}
#define ACCEPT_MSG_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));}
#define ACCEPT_STAT(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
WR_HARPOON(port+hp_scsisig, S_ILL_PH);}
#define ACCEPT_STAT_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));}
#define DISABLE_AUTO(port) (WR_HARPOON(port+hp_scsireset, PROG_RESET),\
WR_HARPOON(port+hp_scsireset, 0x00))
#define ARAM_ACCESS(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
(RD_HARPOON(p_port+hp_page_ctrl) | SGRAM_ARAM)))
#define SGRAM_ACCESS(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
(RD_HARPOON(p_port+hp_page_ctrl) & ~SGRAM_ARAM)))
#define MDISABLE_INT(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
(RD_HARPOON(p_port+hp_page_ctrl) | G_INT_DISABLE)))
#define MENABLE_INT(p_port) (WR_HARPOON(p_port+hp_page_ctrl, \
(RD_HARPOON(p_port+hp_page_ctrl) & ~G_INT_DISABLE)))
void scsiStartAuto(ULONG port);
static UCHAR FPT_sisyncn(ULONG port, UCHAR p_card, UCHAR syncFlag);
static void FPT_ssel(ULONG port, UCHAR p_card);
static void FPT_sres(ULONG port, UCHAR p_card, PSCCBcard pCurrCard);
static void FPT_shandem(ULONG port, UCHAR p_card,PSCCB pCurrSCCB);
static void FPT_stsyncn(ULONG port, UCHAR p_card);
static void FPT_sisyncr(ULONG port,UCHAR sync_pulse, UCHAR offset);
static void FPT_sssyncv(ULONG p_port, UCHAR p_id, UCHAR p_sync_value,
PSCCBMgr_tar_info currTar_Info);
static void FPT_sresb(ULONG port, UCHAR p_card);
static void FPT_sxfrp(ULONG p_port, UCHAR p_card);
static void FPT_schkdd(ULONG port, UCHAR p_card);
static UCHAR FPT_RdStack(ULONG port, UCHAR index);
static void FPT_WrStack(ULONG portBase, UCHAR index, UCHAR data);
static UCHAR FPT_ChkIfChipInitialized(ULONG ioPort);
static void FPT_SendMsg(ULONG port, UCHAR message);
static void FPT_queueFlushTargSccb(UCHAR p_card, UCHAR thisTarg,
UCHAR error_code);
static void FPT_sinits(PSCCB p_sccb, UCHAR p_card);
static void FPT_RNVRamData(PNVRamInfo pNvRamInfo);
static UCHAR FPT_siwidn(ULONG port, UCHAR p_card);
static void FPT_stwidn(ULONG port, UCHAR p_card);
static void FPT_siwidr(ULONG port, UCHAR width);
static void FPT_queueSelectFail(PSCCBcard pCurrCard, UCHAR p_card);
static void FPT_queueDisconnect(PSCCB p_SCCB, UCHAR p_card);
static void FPT_queueCmdComplete(PSCCBcard pCurrCard, PSCCB p_SCCB,
UCHAR p_card);
static void FPT_queueSearchSelect(PSCCBcard pCurrCard, UCHAR p_card);
static void FPT_queueFlushSccb(UCHAR p_card, UCHAR error_code);
static void FPT_queueAddSccb(PSCCB p_SCCB, UCHAR card);
static UCHAR FPT_queueFindSccb(PSCCB p_SCCB, UCHAR p_card);
static void FPT_utilUpdateResidual(PSCCB p_SCCB);
static USHORT FPT_CalcCrc16(UCHAR buffer[]);
static UCHAR FPT_CalcLrc(UCHAR buffer[]);
static void FPT_Wait1Second(ULONG p_port);
static void FPT_Wait(ULONG p_port, UCHAR p_delay);
static void FPT_utilEEWriteOnOff(ULONG p_port,UCHAR p_mode);
static void FPT_utilEEWrite(ULONG p_port, USHORT ee_data, USHORT ee_addr);
static USHORT FPT_utilEERead(ULONG p_port, USHORT ee_addr);
static USHORT FPT_utilEEReadOrg(ULONG p_port, USHORT ee_addr);
static void FPT_utilEESendCmdAddr(ULONG p_port, UCHAR ee_cmd, USHORT ee_addr);
static void FPT_phaseDataOut(ULONG port, UCHAR p_card);
static void FPT_phaseDataIn(ULONG port, UCHAR p_card);
static void FPT_phaseCommand(ULONG port, UCHAR p_card);
static void FPT_phaseStatus(ULONG port, UCHAR p_card);
static void FPT_phaseMsgOut(ULONG port, UCHAR p_card);
static void FPT_phaseMsgIn(ULONG port, UCHAR p_card);
static void FPT_phaseIllegal(ULONG port, UCHAR p_card);
static void FPT_phaseDecode(ULONG port, UCHAR p_card);
static void FPT_phaseChkFifo(ULONG port, UCHAR p_card);
static void FPT_phaseBusFree(ULONG p_port, UCHAR p_card);
static void FPT_XbowInit(ULONG port, UCHAR scamFlg);
static void FPT_BusMasterInit(ULONG p_port);
static void FPT_DiagEEPROM(ULONG p_port);
void busMstrAbort(ULONG port);
static void FPT_dataXferProcessor(ULONG port, PSCCBcard pCurrCard);
static void FPT_busMstrSGDataXferStart(ULONG port, PSCCB pCurrSCCB);
static void FPT_busMstrDataXferStart(ULONG port, PSCCB pCurrSCCB);
static void FPT_hostDataXferAbort(ULONG port, UCHAR p_card, PSCCB pCurrSCCB);
static void FPT_hostDataXferRestart(PSCCB currSCCB);
static UCHAR FPT_SccbMgr_bad_isr(ULONG p_port, UCHAR p_card,
PSCCBcard pCurrCard, USHORT p_int);
static void FPT_SccbMgrTableInitAll(void);
static void FPT_SccbMgrTableInitCard(PSCCBcard pCurrCard, UCHAR p_card);
static void FPT_SccbMgrTableInitTarget(UCHAR p_card, UCHAR target);
static void FPT_scini(UCHAR p_card, UCHAR p_our_id, UCHAR p_power_up);
static int FPT_scarb(ULONG p_port, UCHAR p_sel_type);
static void FPT_scbusf(ULONG p_port);
static void FPT_scsel(ULONG p_port);
static void FPT_scasid(UCHAR p_card, ULONG p_port);
static UCHAR FPT_scxferc(ULONG p_port, UCHAR p_data);
static UCHAR FPT_scsendi(ULONG p_port, UCHAR p_id_string[]);
static UCHAR FPT_sciso(ULONG p_port, UCHAR p_id_string[]);
static void FPT_scwirod(ULONG p_port, UCHAR p_data_bit);
static void FPT_scwiros(ULONG p_port, UCHAR p_data_bit);
static UCHAR FPT_scvalq(UCHAR p_quintet);
static UCHAR FPT_scsell(ULONG p_port, UCHAR targ_id);
static void FPT_scwtsel(ULONG p_port);
static void FPT_inisci(UCHAR p_card, ULONG p_port, UCHAR p_our_id);
static void FPT_scsavdi(UCHAR p_card, ULONG p_port);
static UCHAR FPT_scmachid(UCHAR p_card, UCHAR p_id_string[]);
static void FPT_autoCmdCmplt(ULONG p_port, UCHAR p_card);
static void FPT_autoLoadDefaultMap(ULONG p_port);
void OS_start_timer(unsigned long ioport, unsigned long timeout);
void OS_stop_timer(unsigned long ioport, unsigned long timeout);
void OS_disable_int(unsigned char intvec);
void OS_enable_int(unsigned char intvec);
void OS_delay(unsigned long count);
int OS_VirtToPhys(u32bits CardHandle, u32bits *physaddr, u32bits *virtaddr);
static SCCBMGR_TAR_INFO FPT_sccbMgrTbl[MAX_CARDS][MAX_SCSI_TAR] = { { { 0 } } };
static SCCBCARD FPT_BL_Card[MAX_CARDS] = { { 0 } };
static SCCBSCAM_INFO FPT_scamInfo[MAX_SCSI_TAR] = { { { 0 } } };
static NVRAMINFO FPT_nvRamInfo[MAX_MB_CARDS] = { { 0 } };
static UCHAR FPT_mbCards = 0;
static UCHAR FPT_scamHAString[] = {0x63, 0x07, 'B', 'U', 'S', 'L', 'O', 'G', 'I', 'C', \
' ', 'B', 'T', '-', '9', '3', '0', \
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, \
0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20};
static USHORT FPT_default_intena = 0;
static void (*FPT_s_PhaseTbl[8]) (ULONG, UCHAR)= { 0 };
/*---------------------------------------------------------------------
*
* Function: SccbMgr_sense_adapter
*
* Description: Setup and/or Search for cards and return info to caller.
*
*---------------------------------------------------------------------*/
static int SccbMgr_sense_adapter(PSCCBMGR_INFO pCardInfo)
{
static UCHAR first_time = 1;
UCHAR i,j,id,ScamFlg;
USHORT temp,temp2,temp3,temp4,temp5,temp6;
ULONG ioport;
PNVRamInfo pCurrNvRam;
ioport = pCardInfo->si_baseaddr;
if (RD_HARPOON(ioport+hp_vendor_id_0) != ORION_VEND_0)
return((int)FAILURE);
if ((RD_HARPOON(ioport+hp_vendor_id_1) != ORION_VEND_1))
return((int)FAILURE);
if ((RD_HARPOON(ioport+hp_device_id_0) != ORION_DEV_0))
return((int)FAILURE);
if ((RD_HARPOON(ioport+hp_device_id_1) != ORION_DEV_1))
return((int)FAILURE);
if (RD_HARPOON(ioport+hp_rev_num) != 0x0f){
/* For new Harpoon then check for sub_device ID LSB
the bits(0-3) must be all ZERO for compatible with
current version of SCCBMgr, else skip this Harpoon
device. */
if (RD_HARPOON(ioport+hp_sub_device_id_0) & 0x0f)
return((int)FAILURE);
}
if (first_time)
{
FPT_SccbMgrTableInitAll();
first_time = 0;
FPT_mbCards = 0;
}
if(FPT_RdStack(ioport, 0) != 0x00) {
if(FPT_ChkIfChipInitialized(ioport) == 0)
{
pCurrNvRam = NULL;
WR_HARPOON(ioport+hp_semaphore, 0x00);
FPT_XbowInit(ioport, 0); /*Must Init the SCSI before attempting */
FPT_DiagEEPROM(ioport);
}
else
{
if(FPT_mbCards < MAX_MB_CARDS) {
pCurrNvRam = &FPT_nvRamInfo[FPT_mbCards];
FPT_mbCards++;
pCurrNvRam->niBaseAddr = ioport;
FPT_RNVRamData(pCurrNvRam);
}else
return((int) FAILURE);
}
}else
pCurrNvRam = NULL;
WR_HARPOON(ioport+hp_clkctrl_0, CLKCTRL_DEFAULT);
WR_HARPOON(ioport+hp_sys_ctrl, 0x00);
if(pCurrNvRam)
pCardInfo->si_id = pCurrNvRam->niAdapId;
else
pCardInfo->si_id = (UCHAR)(FPT_utilEERead(ioport, (ADAPTER_SCSI_ID/2)) &
(UCHAR)0x0FF);
pCardInfo->si_lun = 0x00;
pCardInfo->si_fw_revision = ORION_FW_REV;
temp2 = 0x0000;
temp3 = 0x0000;
temp4 = 0x0000;
temp5 = 0x0000;
temp6 = 0x0000;
for (id = 0; id < (16/2); id++) {
if(pCurrNvRam){
temp = (USHORT) pCurrNvRam->niSyncTbl[id];
temp = ((temp & 0x03) + ((temp << 4) & 0xc0)) +
(((temp << 4) & 0x0300) + ((temp << 8) & 0xc000));
}else
temp = FPT_utilEERead(ioport, (USHORT)((SYNC_RATE_TBL/2)+id));
for (i = 0; i < 2; temp >>=8,i++) {
temp2 >>= 1;
temp3 >>= 1;
temp4 >>= 1;
temp5 >>= 1;
temp6 >>= 1;
switch (temp & 0x3)
{
case AUTO_RATE_20: /* Synchronous, 20 mega-transfers/second */
temp6 |= 0x8000; /* Fall through */
case AUTO_RATE_10: /* Synchronous, 10 mega-transfers/second */
temp5 |= 0x8000; /* Fall through */
case AUTO_RATE_05: /* Synchronous, 5 mega-transfers/second */
temp2 |= 0x8000; /* Fall through */
case AUTO_RATE_00: /* Asynchronous */
break;
}
if (temp & DISC_ENABLE_BIT)
temp3 |= 0x8000;
if (temp & WIDE_NEGO_BIT)
temp4 |= 0x8000;
}
}
pCardInfo->si_per_targ_init_sync = temp2;
pCardInfo->si_per_targ_no_disc = temp3;
pCardInfo->si_per_targ_wide_nego = temp4;
pCardInfo->si_per_targ_fast_nego = temp5;
pCardInfo->si_per_targ_ultra_nego = temp6;
if(pCurrNvRam)
i = pCurrNvRam->niSysConf;
else
i = (UCHAR)(FPT_utilEERead(ioport, (SYSTEM_CONFIG/2)));
if(pCurrNvRam)
ScamFlg = pCurrNvRam->niScamConf;
else
ScamFlg = (UCHAR) FPT_utilEERead(ioport, SCAM_CONFIG/2);
pCardInfo->si_flags = 0x0000;
if (i & 0x01)
pCardInfo->si_flags |= SCSI_PARITY_ENA;
if (!(i & 0x02))
pCardInfo->si_flags |= SOFT_RESET;
if (i & 0x10)
pCardInfo->si_flags |= EXTENDED_TRANSLATION;
if (ScamFlg & SCAM_ENABLED)
pCardInfo->si_flags |= FLAG_SCAM_ENABLED;
if (ScamFlg & SCAM_LEVEL2)
pCardInfo->si_flags |= FLAG_SCAM_LEVEL2;
j = (RD_HARPOON(ioport+hp_bm_ctrl) & ~SCSI_TERM_ENA_L);
if (i & 0x04) {
j |= SCSI_TERM_ENA_L;
}
WR_HARPOON(ioport+hp_bm_ctrl, j );
j = (RD_HARPOON(ioport+hp_ee_ctrl) & ~SCSI_TERM_ENA_H);
if (i & 0x08) {
j |= SCSI_TERM_ENA_H;
}
WR_HARPOON(ioport+hp_ee_ctrl, j );
if (!(RD_HARPOON(ioport+hp_page_ctrl) & NARROW_SCSI_CARD))
pCardInfo->si_flags |= SUPPORT_16TAR_32LUN;
pCardInfo->si_card_family = HARPOON_FAMILY;
pCardInfo->si_bustype = BUSTYPE_PCI;
if(pCurrNvRam){
pCardInfo->si_card_model[0] = '9';
switch(pCurrNvRam->niModel & 0x0f){
case MODEL_LT:
pCardInfo->si_card_model[1] = '3';
pCardInfo->si_card_model[2] = '0';
break;
case MODEL_LW:
pCardInfo->si_card_model[1] = '5';
pCardInfo->si_card_model[2] = '0';
break;
case MODEL_DL:
pCardInfo->si_card_model[1] = '3';
pCardInfo->si_card_model[2] = '2';
break;
case MODEL_DW:
pCardInfo->si_card_model[1] = '5';
pCardInfo->si_card_model[2] = '2';
break;
}
}else{
temp = FPT_utilEERead(ioport, (MODEL_NUMB_0/2));
pCardInfo->si_card_model[0] = (UCHAR)(temp >> 8);
temp = FPT_utilEERead(ioport, (MODEL_NUMB_2/2));
pCardInfo->si_card_model[1] = (UCHAR)(temp & 0x00FF);
pCardInfo->si_card_model[2] = (UCHAR)(temp >> 8);
}
if (pCardInfo->si_card_model[1] == '3')
{
if (RD_HARPOON(ioport+hp_ee_ctrl) & BIT(7))
pCardInfo->si_flags |= LOW_BYTE_TERM;
}
else if (pCardInfo->si_card_model[2] == '0')
{
temp = RD_HARPOON(ioport+hp_xfer_pad);
WR_HARPOON(ioport+hp_xfer_pad, (temp & ~BIT(4)));
if (RD_HARPOON(ioport+hp_ee_ctrl) & BIT(7))
pCardInfo->si_flags |= LOW_BYTE_TERM;
WR_HARPOON(ioport+hp_xfer_pad, (temp | BIT(4)));
if (RD_HARPOON(ioport+hp_ee_ctrl) & BIT(7))
pCardInfo->si_flags |= HIGH_BYTE_TERM;
WR_HARPOON(ioport+hp_xfer_pad, temp);
}
else
{
temp = RD_HARPOON(ioport+hp_ee_ctrl);
temp2 = RD_HARPOON(ioport+hp_xfer_pad);
WR_HARPOON(ioport+hp_ee_ctrl, (temp | SEE_CS));
WR_HARPOON(ioport+hp_xfer_pad, (temp2 | BIT(4)));
temp3 = 0;
for (i = 0; i < 8; i++)
{
temp3 <<= 1;
if (!(RD_HARPOON(ioport+hp_ee_ctrl) & BIT(7)))
temp3 |= 1;
WR_HARPOON(ioport+hp_xfer_pad, (temp2 & ~BIT(4)));
WR_HARPOON(ioport+hp_xfer_pad, (temp2 | BIT(4)));
}
WR_HARPOON(ioport+hp_ee_ctrl, temp);
WR_HARPOON(ioport+hp_xfer_pad, temp2);
if (!(temp3 & BIT(7)))
pCardInfo->si_flags |= LOW_BYTE_TERM;
if (!(temp3 & BIT(6)))
pCardInfo->si_flags |= HIGH_BYTE_TERM;
}
ARAM_ACCESS(ioport);
for ( i = 0; i < 4; i++ ) {
pCardInfo->si_XlatInfo[i] =
RD_HARPOON(ioport+hp_aramBase+BIOS_DATA_OFFSET+i);
}
/* return with -1 if no sort, else return with
logical card number sorted by BIOS (zero-based) */
pCardInfo->si_relative_cardnum =
(UCHAR)(RD_HARPOON(ioport+hp_aramBase+BIOS_RELATIVE_CARD)-1);
SGRAM_ACCESS(ioport);
FPT_s_PhaseTbl[0] = FPT_phaseDataOut;
FPT_s_PhaseTbl[1] = FPT_phaseDataIn;
FPT_s_PhaseTbl[2] = FPT_phaseIllegal;
FPT_s_PhaseTbl[3] = FPT_phaseIllegal;
FPT_s_PhaseTbl[4] = FPT_phaseCommand;
FPT_s_PhaseTbl[5] = FPT_phaseStatus;
FPT_s_PhaseTbl[6] = FPT_phaseMsgOut;
FPT_s_PhaseTbl[7] = FPT_phaseMsgIn;
pCardInfo->si_present = 0x01;
return(0);
}
/*---------------------------------------------------------------------
*
* Function: SccbMgr_config_adapter
*
* Description: Setup adapter for normal operation (hard reset).
*
*---------------------------------------------------------------------*/
static ULONG SccbMgr_config_adapter(PSCCBMGR_INFO pCardInfo)
{
PSCCBcard CurrCard = NULL;
PNVRamInfo pCurrNvRam;
UCHAR i,j,thisCard, ScamFlg;
USHORT temp,sync_bit_map,id;
ULONG ioport;
ioport = pCardInfo->si_baseaddr;
for(thisCard =0; thisCard <= MAX_CARDS; thisCard++) {
if (thisCard == MAX_CARDS) {
return(FAILURE);
}
if (FPT_BL_Card[thisCard].ioPort == ioport) {
CurrCard = &FPT_BL_Card[thisCard];
FPT_SccbMgrTableInitCard(CurrCard,thisCard);
break;
}
else if (FPT_BL_Card[thisCard].ioPort == 0x00) {
FPT_BL_Card[thisCard].ioPort = ioport;
CurrCard = &FPT_BL_Card[thisCard];
if(FPT_mbCards)
for(i = 0; i < FPT_mbCards; i++){
if(CurrCard->ioPort == FPT_nvRamInfo[i].niBaseAddr)
CurrCard->pNvRamInfo = &FPT_nvRamInfo[i];
}
FPT_SccbMgrTableInitCard(CurrCard,thisCard);
CurrCard->cardIndex = thisCard;
CurrCard->cardInfo = pCardInfo;
break;
}
}
pCurrNvRam = CurrCard->pNvRamInfo;
if(pCurrNvRam){
ScamFlg = pCurrNvRam->niScamConf;
}
else{
ScamFlg = (UCHAR) FPT_utilEERead(ioport, SCAM_CONFIG/2);
}
FPT_BusMasterInit(ioport);
FPT_XbowInit(ioport, ScamFlg);
FPT_autoLoadDefaultMap(ioport);
for (i = 0,id = 0x01; i != pCardInfo->si_id; i++,id <<= 1){}
WR_HARPOON(ioport+hp_selfid_0, id);
WR_HARPOON(ioport+hp_selfid_1, 0x00);
WR_HARPOON(ioport+hp_arb_id, pCardInfo->si_id);
CurrCard->ourId = pCardInfo->si_id;
i = (UCHAR) pCardInfo->si_flags;
if (i & SCSI_PARITY_ENA)
WR_HARPOON(ioport+hp_portctrl_1,(HOST_MODE8 | CHK_SCSI_P));
j = (RD_HARPOON(ioport+hp_bm_ctrl) & ~SCSI_TERM_ENA_L);
if (i & LOW_BYTE_TERM)
j |= SCSI_TERM_ENA_L;
WR_HARPOON(ioport+hp_bm_ctrl, j);
j = (RD_HARPOON(ioport+hp_ee_ctrl) & ~SCSI_TERM_ENA_H);
if (i & HIGH_BYTE_TERM)
j |= SCSI_TERM_ENA_H;
WR_HARPOON(ioport+hp_ee_ctrl, j );
if (!(pCardInfo->si_flags & SOFT_RESET)) {
FPT_sresb(ioport,thisCard);
FPT_scini(thisCard, pCardInfo->si_id, 0);
}
if (pCardInfo->si_flags & POST_ALL_UNDERRRUNS)
CurrCard->globalFlags |= F_NO_FILTER;
if(pCurrNvRam){
if(pCurrNvRam->niSysConf & 0x10)
CurrCard->globalFlags |= F_GREEN_PC;
}
else{
if (FPT_utilEERead(ioport, (SYSTEM_CONFIG/2)) & GREEN_PC_ENA)
CurrCard->globalFlags |= F_GREEN_PC;
}
/* Set global flag to indicate Re-Negotiation to be done on all
ckeck condition */
if(pCurrNvRam){
if(pCurrNvRam->niScsiConf & 0x04)
CurrCard->globalFlags |= F_DO_RENEGO;
}
else{
if (FPT_utilEERead(ioport, (SCSI_CONFIG/2)) & RENEGO_ENA)
CurrCard->globalFlags |= F_DO_RENEGO;
}
if(pCurrNvRam){
if(pCurrNvRam->niScsiConf & 0x08)
CurrCard->globalFlags |= F_CONLUN_IO;
}
else{
if (FPT_utilEERead(ioport, (SCSI_CONFIG/2)) & CONNIO_ENA)
CurrCard->globalFlags |= F_CONLUN_IO;
}
temp = pCardInfo->si_per_targ_no_disc;
for (i = 0,id = 1; i < MAX_SCSI_TAR; i++, id <<= 1) {
if (temp & id)
FPT_sccbMgrTbl[thisCard][i].TarStatus |= TAR_ALLOW_DISC;
}
sync_bit_map = 0x0001;
for (id = 0; id < (MAX_SCSI_TAR/2); id++) {
if(pCurrNvRam){
temp = (USHORT) pCurrNvRam->niSyncTbl[id];
temp = ((temp & 0x03) + ((temp << 4) & 0xc0)) +
(((temp << 4) & 0x0300) + ((temp << 8) & 0xc000));
}else
temp = FPT_utilEERead(ioport, (USHORT)((SYNC_RATE_TBL/2)+id));
for (i = 0; i < 2; temp >>=8,i++) {
if (pCardInfo->si_per_targ_init_sync & sync_bit_map) {
FPT_sccbMgrTbl[thisCard][id*2+i].TarEEValue = (UCHAR)temp;
}
else {
FPT_sccbMgrTbl[thisCard][id*2+i].TarStatus |= SYNC_SUPPORTED;
FPT_sccbMgrTbl[thisCard][id*2+i].TarEEValue =
(UCHAR)(temp & ~EE_SYNC_MASK);
}
/* if ((pCardInfo->si_per_targ_wide_nego & sync_bit_map) ||
(id*2+i >= 8)){
*/
if (pCardInfo->si_per_targ_wide_nego & sync_bit_map){
FPT_sccbMgrTbl[thisCard][id*2+i].TarEEValue |= EE_WIDE_SCSI;
}
else { /* NARROW SCSI */
FPT_sccbMgrTbl[thisCard][id*2+i].TarStatus |= WIDE_NEGOCIATED;
}
sync_bit_map <<= 1;
}
}
WR_HARPOON((ioport+hp_semaphore),
(UCHAR)(RD_HARPOON((ioport+hp_semaphore)) | SCCB_MGR_PRESENT));
return((ULONG)CurrCard);
}
static void SccbMgr_unload_card(ULONG pCurrCard)
{
UCHAR i;
ULONG portBase;
ULONG regOffset;
ULONG scamData;
ULONG *pScamTbl;
PNVRamInfo pCurrNvRam;
pCurrNvRam = ((PSCCBcard)pCurrCard)->pNvRamInfo;
if(pCurrNvRam){
FPT_WrStack(pCurrNvRam->niBaseAddr, 0, pCurrNvRam->niModel);
FPT_WrStack(pCurrNvRam->niBaseAddr, 1, pCurrNvRam->niSysConf);
FPT_WrStack(pCurrNvRam->niBaseAddr, 2, pCurrNvRam->niScsiConf);
FPT_WrStack(pCurrNvRam->niBaseAddr, 3, pCurrNvRam->niScamConf);
FPT_WrStack(pCurrNvRam->niBaseAddr, 4, pCurrNvRam->niAdapId);
for(i = 0; i < MAX_SCSI_TAR / 2; i++)
FPT_WrStack(pCurrNvRam->niBaseAddr, (UCHAR)(i+5), pCurrNvRam->niSyncTbl[i]);
portBase = pCurrNvRam->niBaseAddr;
for(i = 0; i < MAX_SCSI_TAR; i++){
regOffset = hp_aramBase + 64 + i*4;
pScamTbl = (ULONG *) &pCurrNvRam->niScamTbl[i];
scamData = *pScamTbl;
WR_HARP32(portBase, regOffset, scamData);
}
}else{
FPT_WrStack(((PSCCBcard)pCurrCard)->ioPort, 0, 0);
}
}
static void FPT_RNVRamData(PNVRamInfo pNvRamInfo)
{
UCHAR i;
ULONG portBase;
ULONG regOffset;
ULONG scamData;
ULONG *pScamTbl;
pNvRamInfo->niModel = FPT_RdStack(pNvRamInfo->niBaseAddr, 0);
pNvRamInfo->niSysConf = FPT_RdStack(pNvRamInfo->niBaseAddr, 1);
pNvRamInfo->niScsiConf = FPT_RdStack(pNvRamInfo->niBaseAddr, 2);
pNvRamInfo->niScamConf = FPT_RdStack(pNvRamInfo->niBaseAddr, 3);
pNvRamInfo->niAdapId = FPT_RdStack(pNvRamInfo->niBaseAddr, 4);
for(i = 0; i < MAX_SCSI_TAR / 2; i++)
pNvRamInfo->niSyncTbl[i] = FPT_RdStack(pNvRamInfo->niBaseAddr, (UCHAR)(i+5));
portBase = pNvRamInfo->niBaseAddr;
for(i = 0; i < MAX_SCSI_TAR; i++){
regOffset = hp_aramBase + 64 + i*4;
RD_HARP32(portBase, regOffset, scamData);
pScamTbl = (ULONG *) &pNvRamInfo->niScamTbl[i];
*pScamTbl = scamData;
}
}
static UCHAR FPT_RdStack(ULONG portBase, UCHAR index)
{
WR_HARPOON(portBase + hp_stack_addr, index);
return(RD_HARPOON(portBase + hp_stack_data));
}
static void FPT_WrStack(ULONG portBase, UCHAR index, UCHAR data)
{
WR_HARPOON(portBase + hp_stack_addr, index);
WR_HARPOON(portBase + hp_stack_data, data);
}
static UCHAR FPT_ChkIfChipInitialized(ULONG ioPort)
{
if((RD_HARPOON(ioPort + hp_arb_id) & 0x0f) != FPT_RdStack(ioPort, 4))
return(0);
if((RD_HARPOON(ioPort + hp_clkctrl_0) & CLKCTRL_DEFAULT)
!= CLKCTRL_DEFAULT)
return(0);
if((RD_HARPOON(ioPort + hp_seltimeout) == TO_250ms) ||
(RD_HARPOON(ioPort + hp_seltimeout) == TO_290ms))
return(1);
return(0);
}
/*---------------------------------------------------------------------
*
* Function: SccbMgr_start_sccb
*
* Description: Start a command pointed to by p_Sccb. When the
* command is completed it will be returned via the
* callback function.
*
*---------------------------------------------------------------------*/
static void SccbMgr_start_sccb(ULONG pCurrCard, PSCCB p_Sccb)
{
ULONG ioport;
UCHAR thisCard, lun;
PSCCB pSaveSccb;
CALL_BK_FN callback;
thisCard = ((PSCCBcard) pCurrCard)->cardIndex;
ioport = ((PSCCBcard) pCurrCard)->ioPort;
if((p_Sccb->TargID > MAX_SCSI_TAR) || (p_Sccb->Lun > MAX_LUN))
{
p_Sccb->HostStatus = SCCB_COMPLETE;
p_Sccb->SccbStatus = SCCB_ERROR;
callback = (CALL_BK_FN)p_Sccb->SccbCallback;
if (callback)
callback(p_Sccb);
return;
}
FPT_sinits(p_Sccb,thisCard);
if (!((PSCCBcard) pCurrCard)->cmdCounter)
{
WR_HARPOON(ioport+hp_semaphore, (RD_HARPOON(ioport+hp_semaphore)
| SCCB_MGR_ACTIVE));
if (((PSCCBcard) pCurrCard)->globalFlags & F_GREEN_PC)
{
WR_HARPOON(ioport+hp_clkctrl_0, CLKCTRL_DEFAULT);
WR_HARPOON(ioport+hp_sys_ctrl, 0x00);
}
}
((PSCCBcard)pCurrCard)->cmdCounter++;
if (RD_HARPOON(ioport+hp_semaphore) & BIOS_IN_USE) {
WR_HARPOON(ioport+hp_semaphore, (RD_HARPOON(ioport+hp_semaphore)
| TICKLE_ME));
if(p_Sccb->OperationCode == RESET_COMMAND)
{
pSaveSccb = ((PSCCBcard) pCurrCard)->currentSCCB;
((PSCCBcard) pCurrCard)->currentSCCB = p_Sccb;
FPT_queueSelectFail(&FPT_BL_Card[thisCard], thisCard);
((PSCCBcard) pCurrCard)->currentSCCB = pSaveSccb;
}
else
{
FPT_queueAddSccb(p_Sccb,thisCard);
}
}
else if ((RD_HARPOON(ioport+hp_page_ctrl) & G_INT_DISABLE)) {
if(p_Sccb->OperationCode == RESET_COMMAND)
{
pSaveSccb = ((PSCCBcard) pCurrCard)->currentSCCB;
((PSCCBcard) pCurrCard)->currentSCCB = p_Sccb;
FPT_queueSelectFail(&FPT_BL_Card[thisCard], thisCard);
((PSCCBcard) pCurrCard)->currentSCCB = pSaveSccb;
}
else
{
FPT_queueAddSccb(p_Sccb,thisCard);
}
}
else {
MDISABLE_INT(ioport);
if((((PSCCBcard) pCurrCard)->globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[thisCard][p_Sccb->TargID].TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
lun = p_Sccb->Lun;
else
lun = 0;
if ((((PSCCBcard) pCurrCard)->currentSCCB == NULL) &&
(FPT_sccbMgrTbl[thisCard][p_Sccb->TargID].TarSelQ_Cnt == 0) &&
(FPT_sccbMgrTbl[thisCard][p_Sccb->TargID].TarLUNBusy[lun]
== 0)) {
((PSCCBcard) pCurrCard)->currentSCCB = p_Sccb;
FPT_ssel(p_Sccb->SccbIOPort,thisCard);
}
else {
if(p_Sccb->OperationCode == RESET_COMMAND)
{
pSaveSccb = ((PSCCBcard) pCurrCard)->currentSCCB;
((PSCCBcard) pCurrCard)->currentSCCB = p_Sccb;
FPT_queueSelectFail(&FPT_BL_Card[thisCard], thisCard);
((PSCCBcard) pCurrCard)->currentSCCB = pSaveSccb;
}
else
{
FPT_queueAddSccb(p_Sccb,thisCard);
}
}
MENABLE_INT(ioport);
}
}
/*---------------------------------------------------------------------
*
* Function: SccbMgr_abort_sccb
*
* Description: Abort the command pointed to by p_Sccb. When the
* command is completed it will be returned via the
* callback function.
*
*---------------------------------------------------------------------*/
static int SccbMgr_abort_sccb(ULONG pCurrCard, PSCCB p_Sccb)
{
ULONG ioport;
UCHAR thisCard;
CALL_BK_FN callback;
UCHAR TID;
PSCCB pSaveSCCB;
PSCCBMgr_tar_info currTar_Info;
ioport = ((PSCCBcard) pCurrCard)->ioPort;
thisCard = ((PSCCBcard)pCurrCard)->cardIndex;
if (!(RD_HARPOON(ioport+hp_page_ctrl) & G_INT_DISABLE))
{
if (FPT_queueFindSccb(p_Sccb,thisCard))
{
((PSCCBcard)pCurrCard)->cmdCounter--;
if (!((PSCCBcard)pCurrCard)->cmdCounter)
WR_HARPOON(ioport+hp_semaphore,(RD_HARPOON(ioport+hp_semaphore)
& (UCHAR)(~(SCCB_MGR_ACTIVE | TICKLE_ME)) ));
p_Sccb->SccbStatus = SCCB_ABORT;
callback = p_Sccb->SccbCallback;
callback(p_Sccb);
return(0);
}
else
{
if (((PSCCBcard)pCurrCard)->currentSCCB == p_Sccb)
{
p_Sccb->SccbStatus = SCCB_ABORT;
return(0);
}
else
{
TID = p_Sccb->TargID;
if(p_Sccb->Sccb_tag)
{
MDISABLE_INT(ioport);
if (((PSCCBcard) pCurrCard)->discQ_Tbl[p_Sccb->Sccb_tag]==p_Sccb)
{
p_Sccb->SccbStatus = SCCB_ABORT;
p_Sccb->Sccb_scsistat = ABORT_ST;
p_Sccb->Sccb_scsimsg = SMABORT_TAG;
if(((PSCCBcard) pCurrCard)->currentSCCB == NULL)
{
((PSCCBcard) pCurrCard)->currentSCCB = p_Sccb;
FPT_ssel(ioport, thisCard);
}
else
{
pSaveSCCB = ((PSCCBcard) pCurrCard)->currentSCCB;
((PSCCBcard) pCurrCard)->currentSCCB = p_Sccb;
FPT_queueSelectFail((PSCCBcard) pCurrCard, thisCard);
((PSCCBcard) pCurrCard)->currentSCCB = pSaveSCCB;
}
}
MENABLE_INT(ioport);
return(0);
}
else
{
currTar_Info = &FPT_sccbMgrTbl[thisCard][p_Sccb->TargID];
if(FPT_BL_Card[thisCard].discQ_Tbl[currTar_Info->LunDiscQ_Idx[p_Sccb->Lun]]
== p_Sccb)
{
p_Sccb->SccbStatus = SCCB_ABORT;
return(0);
}
}
}
}
}
return(-1);
}
/*---------------------------------------------------------------------
*
* Function: SccbMgr_my_int
*
* Description: Do a quick check to determine if there is a pending
* interrupt for this card and disable the IRQ Pin if so.
*
*---------------------------------------------------------------------*/
static UCHAR SccbMgr_my_int(ULONG pCurrCard)
{
ULONG ioport;
ioport = ((PSCCBcard)pCurrCard)->ioPort;
if (RD_HARPOON(ioport+hp_int_status) & INT_ASSERTED)
{
return(1);
}
else
return(0);
}
/*---------------------------------------------------------------------
*
* Function: SccbMgr_isr
*
* Description: This is our entry point when an interrupt is generated
* by the card and the upper level driver passes it on to
* us.
*
*---------------------------------------------------------------------*/
static int SccbMgr_isr(ULONG pCurrCard)
{
PSCCB currSCCB;
UCHAR thisCard,result,bm_status, bm_int_st;
USHORT hp_int;
UCHAR i, target;
ULONG ioport;
thisCard = ((PSCCBcard)pCurrCard)->cardIndex;
ioport = ((PSCCBcard)pCurrCard)->ioPort;
MDISABLE_INT(ioport);
if ((bm_int_st=RD_HARPOON(ioport+hp_int_status)) & EXT_STATUS_ON)
bm_status = RD_HARPOON(ioport+hp_ext_status) & (UCHAR)BAD_EXT_STATUS;
else
bm_status = 0;
WR_HARPOON(ioport+hp_int_mask, (INT_CMD_COMPL | SCSI_INTERRUPT));
while ((hp_int = RDW_HARPOON((ioport+hp_intstat)) & FPT_default_intena) |
bm_status)
{
currSCCB = ((PSCCBcard)pCurrCard)->currentSCCB;
if (hp_int & (FIFO | TIMEOUT | RESET | SCAM_SEL) || bm_status) {
result = FPT_SccbMgr_bad_isr(ioport,thisCard,((PSCCBcard)pCurrCard),hp_int);
WRW_HARPOON((ioport+hp_intstat), (FIFO | TIMEOUT | RESET | SCAM_SEL));
bm_status = 0;
if (result) {
MENABLE_INT(ioport);
return(result);
}
}
else if (hp_int & ICMD_COMP) {
if ( !(hp_int & BUS_FREE) ) {
/* Wait for the BusFree before starting a new command. We
must also check for being reselected since the BusFree
may not show up if another device reselects us in 1.5us or
less. SRR Wednesday, 3/8/1995.
*/
while (!(RDW_HARPOON((ioport+hp_intstat)) & (BUS_FREE | RSEL))) ;
}
if (((PSCCBcard)pCurrCard)->globalFlags & F_HOST_XFER_ACT)
FPT_phaseChkFifo(ioport, thisCard);
/* WRW_HARPOON((ioport+hp_intstat),
(BUS_FREE | ICMD_COMP | ITAR_DISC | XFER_CNT_0));
*/
WRW_HARPOON((ioport+hp_intstat), CLR_ALL_INT_1);
FPT_autoCmdCmplt(ioport,thisCard);
}
else if (hp_int & ITAR_DISC)
{
if (((PSCCBcard)pCurrCard)->globalFlags & F_HOST_XFER_ACT) {
FPT_phaseChkFifo(ioport, thisCard);
}
if (RD_HARPOON(ioport+hp_gp_reg_1) == SMSAVE_DATA_PTR) {
WR_HARPOON(ioport+hp_gp_reg_1, 0x00);
currSCCB->Sccb_XferState |= F_NO_DATA_YET;
currSCCB->Sccb_savedATC = currSCCB->Sccb_ATC;
}
currSCCB->Sccb_scsistat = DISCONNECT_ST;
FPT_queueDisconnect(currSCCB,thisCard);
/* Wait for the BusFree before starting a new command. We
must also check for being reselected since the BusFree
may not show up if another device reselects us in 1.5us or
less. SRR Wednesday, 3/8/1995.
*/
while (!(RDW_HARPOON((ioport+hp_intstat)) & (BUS_FREE | RSEL)) &&
!((RDW_HARPOON((ioport+hp_intstat)) & PHASE) &&
RD_HARPOON((ioport+hp_scsisig)) ==
(SCSI_BSY | SCSI_REQ | SCSI_CD | SCSI_MSG | SCSI_IOBIT))) ;
/*
The additional loop exit condition above detects a timing problem
with the revision D/E harpoon chips. The caller should reset the
host adapter to recover when 0xFE is returned.
*/
if (!(RDW_HARPOON((ioport+hp_intstat)) & (BUS_FREE | RSEL)))
{
MENABLE_INT(ioport);
return 0xFE;
}
WRW_HARPOON((ioport+hp_intstat), (BUS_FREE | ITAR_DISC));
((PSCCBcard)pCurrCard)->globalFlags |= F_NEW_SCCB_CMD;
}
else if (hp_int & RSEL) {
WRW_HARPOON((ioport+hp_intstat), (PROG_HLT | RSEL | PHASE | BUS_FREE));
if (RDW_HARPOON((ioport+hp_intstat)) & ITAR_DISC)
{
if (((PSCCBcard)pCurrCard)->globalFlags & F_HOST_XFER_ACT)
{
FPT_phaseChkFifo(ioport, thisCard);
}
if (RD_HARPOON(ioport+hp_gp_reg_1) == SMSAVE_DATA_PTR)
{
WR_HARPOON(ioport+hp_gp_reg_1, 0x00);
currSCCB->Sccb_XferState |= F_NO_DATA_YET;
currSCCB->Sccb_savedATC = currSCCB->Sccb_ATC;
}
WRW_HARPOON((ioport+hp_intstat), (BUS_FREE | ITAR_DISC));
currSCCB->Sccb_scsistat = DISCONNECT_ST;
FPT_queueDisconnect(currSCCB,thisCard);
}
FPT_sres(ioport,thisCard,((PSCCBcard)pCurrCard));
FPT_phaseDecode(ioport,thisCard);
}
else if ((hp_int & IDO_STRT) && (!(hp_int & BUS_FREE)))
{
WRW_HARPOON((ioport+hp_intstat), (IDO_STRT | XFER_CNT_0));
FPT_phaseDecode(ioport,thisCard);
}
else if ( (hp_int & IUNKWN) || (hp_int & PROG_HLT) )
{
WRW_HARPOON((ioport+hp_intstat), (PHASE | IUNKWN | PROG_HLT));
if ((RD_HARPOON(ioport+hp_prgmcnt_0) & (UCHAR)0x3f)< (UCHAR)SELCHK)
{
FPT_phaseDecode(ioport,thisCard);
}
else
{
/* Harpoon problem some SCSI target device respond to selection
with short BUSY pulse (<400ns) this will make the Harpoon is not able
to latch the correct Target ID into reg. x53.
The work around require to correct this reg. But when write to this
reg. (0x53) also increment the FIFO write addr reg (0x6f), thus we
need to read this reg first then restore it later. After update to 0x53 */
i = (UCHAR)(RD_HARPOON(ioport+hp_fifowrite));
target = (UCHAR)(RD_HARPOON(ioport+hp_gp_reg_3));
WR_HARPOON(ioport+hp_xfer_pad, (UCHAR) ID_UNLOCK);
WR_HARPOON(ioport+hp_select_id, (UCHAR)(target | target<<4));
WR_HARPOON(ioport+hp_xfer_pad, (UCHAR) 0x00);
WR_HARPOON(ioport+hp_fifowrite, i);
WR_HARPOON(ioport+hp_autostart_3, (AUTO_IMMED+TAG_STRT));
}
}
else if (hp_int & XFER_CNT_0) {
WRW_HARPOON((ioport+hp_intstat), XFER_CNT_0);
FPT_schkdd(ioport,thisCard);
}
else if (hp_int & BUS_FREE) {
WRW_HARPOON((ioport+hp_intstat), BUS_FREE);
if (((PSCCBcard)pCurrCard)->globalFlags & F_HOST_XFER_ACT) {
FPT_hostDataXferAbort(ioport,thisCard,currSCCB);
}
FPT_phaseBusFree(ioport,thisCard);
}
else if (hp_int & ITICKLE) {
WRW_HARPOON((ioport+hp_intstat), ITICKLE);
((PSCCBcard)pCurrCard)->globalFlags |= F_NEW_SCCB_CMD;
}
if (((PSCCBcard)pCurrCard)->globalFlags & F_NEW_SCCB_CMD) {
((PSCCBcard)pCurrCard)->globalFlags &= ~F_NEW_SCCB_CMD;
if (((PSCCBcard)pCurrCard)->currentSCCB == NULL) {
FPT_queueSearchSelect(((PSCCBcard)pCurrCard),thisCard);
}
if (((PSCCBcard)pCurrCard)->currentSCCB != NULL) {
((PSCCBcard)pCurrCard)->globalFlags &= ~F_NEW_SCCB_CMD;
FPT_ssel(ioport,thisCard);
}
break;
}
} /*end while */
MENABLE_INT(ioport);
return(0);
}
/*---------------------------------------------------------------------
*
* Function: Sccb_bad_isr
*
* Description: Some type of interrupt has occurred which is slightly
* out of the ordinary. We will now decode it fully, in
* this routine. This is broken up in an attempt to save
* processing time.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_SccbMgr_bad_isr(ULONG p_port, UCHAR p_card,
PSCCBcard pCurrCard, USHORT p_int)
{
UCHAR temp, ScamFlg;
PSCCBMgr_tar_info currTar_Info;
PNVRamInfo pCurrNvRam;
if (RD_HARPOON(p_port+hp_ext_status) &
(BM_FORCE_OFF | PCI_DEV_TMOUT | BM_PARITY_ERR | PIO_OVERRUN) )
{
if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
{
FPT_hostDataXferAbort(p_port,p_card, pCurrCard->currentSCCB);
}
if (RD_HARPOON(p_port+hp_pci_stat_cfg) & REC_MASTER_ABORT)
{
WR_HARPOON(p_port+hp_pci_stat_cfg,
(RD_HARPOON(p_port+hp_pci_stat_cfg) & ~REC_MASTER_ABORT));
WR_HARPOON(p_port+hp_host_blk_cnt, 0x00);
}
if (pCurrCard->currentSCCB != NULL)
{
if (!pCurrCard->currentSCCB->HostStatus)
pCurrCard->currentSCCB->HostStatus = SCCB_BM_ERR;
FPT_sxfrp(p_port,p_card);
temp = (UCHAR)(RD_HARPOON(p_port+hp_ee_ctrl) &
(EXT_ARB_ACK | SCSI_TERM_ENA_H));
WR_HARPOON(p_port+hp_ee_ctrl, ((UCHAR)temp | SEE_MS | SEE_CS));
WR_HARPOON(p_port+hp_ee_ctrl, temp);
if (!(RDW_HARPOON((p_port+hp_intstat)) & (BUS_FREE | RESET)))
{
FPT_phaseDecode(p_port,p_card);
}
}
}
else if (p_int & RESET)
{
WR_HARPOON(p_port+hp_clkctrl_0, CLKCTRL_DEFAULT);
WR_HARPOON(p_port+hp_sys_ctrl, 0x00);
if (pCurrCard->currentSCCB != NULL) {
if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
FPT_hostDataXferAbort(p_port,p_card, pCurrCard->currentSCCB);
}
DISABLE_AUTO(p_port);
FPT_sresb(p_port,p_card);
while(RD_HARPOON(p_port+hp_scsictrl_0) & SCSI_RST) {}
pCurrNvRam = pCurrCard->pNvRamInfo;
if(pCurrNvRam){
ScamFlg = pCurrNvRam->niScamConf;
}
else{
ScamFlg = (UCHAR) FPT_utilEERead(p_port, SCAM_CONFIG/2);
}
FPT_XbowInit(p_port, ScamFlg);
FPT_scini(p_card, pCurrCard->ourId, 0);
return(0xFF);
}
else if (p_int & FIFO) {
WRW_HARPOON((p_port+hp_intstat), FIFO);
if (pCurrCard->currentSCCB != NULL)
FPT_sxfrp(p_port,p_card);
}
else if (p_int & TIMEOUT)
{
DISABLE_AUTO(p_port);
WRW_HARPOON((p_port+hp_intstat),
(PROG_HLT | TIMEOUT | SEL |BUS_FREE | PHASE | IUNKWN));
pCurrCard->currentSCCB->HostStatus = SCCB_SELECTION_TIMEOUT;
currTar_Info = &FPT_sccbMgrTbl[p_card][pCurrCard->currentSCCB->TargID];
if((pCurrCard->globalFlags & F_CONLUN_IO) &&
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
currTar_Info->TarLUNBusy[pCurrCard->currentSCCB->Lun] = 0;
else
currTar_Info->TarLUNBusy[0] = 0;
if (currTar_Info->TarEEValue & EE_SYNC_MASK)
{
currTar_Info->TarSyncCtrl = 0;
currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
}
if (currTar_Info->TarEEValue & EE_WIDE_SCSI)
{
currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
}
FPT_sssyncv(p_port, pCurrCard->currentSCCB->TargID, NARROW_SCSI,currTar_Info);
FPT_queueCmdComplete(pCurrCard, pCurrCard->currentSCCB, p_card);
}
else if (p_int & SCAM_SEL)
{
FPT_scarb(p_port,LEVEL2_TAR);
FPT_scsel(p_port);
FPT_scasid(p_card, p_port);
FPT_scbusf(p_port);
WRW_HARPOON((p_port+hp_intstat), SCAM_SEL);
}
return(0x00);
}
/*---------------------------------------------------------------------
*
* Function: SccbMgrTableInit
*
* Description: Initialize all Sccb manager data structures.
*
*---------------------------------------------------------------------*/
static void FPT_SccbMgrTableInitAll()
{
UCHAR thisCard;
for (thisCard = 0; thisCard < MAX_CARDS; thisCard++)
{
FPT_SccbMgrTableInitCard(&FPT_BL_Card[thisCard],thisCard);
FPT_BL_Card[thisCard].ioPort = 0x00;
FPT_BL_Card[thisCard].cardInfo = NULL;
FPT_BL_Card[thisCard].cardIndex = 0xFF;
FPT_BL_Card[thisCard].ourId = 0x00;
FPT_BL_Card[thisCard].pNvRamInfo = NULL;
}
}
/*---------------------------------------------------------------------
*
* Function: SccbMgrTableInit
*
* Description: Initialize all Sccb manager data structures.
*
*---------------------------------------------------------------------*/
static void FPT_SccbMgrTableInitCard(PSCCBcard pCurrCard, UCHAR p_card)
{
UCHAR scsiID, qtag;
for (qtag = 0; qtag < QUEUE_DEPTH; qtag++)
{
FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
}
for (scsiID = 0; scsiID < MAX_SCSI_TAR; scsiID++)
{
FPT_sccbMgrTbl[p_card][scsiID].TarStatus = 0;
FPT_sccbMgrTbl[p_card][scsiID].TarEEValue = 0;
FPT_SccbMgrTableInitTarget(p_card, scsiID);
}
pCurrCard->scanIndex = 0x00;
pCurrCard->currentSCCB = NULL;
pCurrCard->globalFlags = 0x00;
pCurrCard->cmdCounter = 0x00;
pCurrCard->tagQ_Lst = 0x01;
pCurrCard->discQCount = 0;
}
/*---------------------------------------------------------------------
*
* Function: SccbMgrTableInit
*
* Description: Initialize all Sccb manager data structures.
*
*---------------------------------------------------------------------*/
static void FPT_SccbMgrTableInitTarget(UCHAR p_card, UCHAR target)
{
UCHAR lun, qtag;
PSCCBMgr_tar_info currTar_Info;
currTar_Info = &FPT_sccbMgrTbl[p_card][target];
currTar_Info->TarSelQ_Cnt = 0;
currTar_Info->TarSyncCtrl = 0;
currTar_Info->TarSelQ_Head = NULL;
currTar_Info->TarSelQ_Tail = NULL;
currTar_Info->TarTagQ_Cnt = 0;
currTar_Info->TarLUN_CA = 0;
for (lun = 0; lun < MAX_LUN; lun++)
{
currTar_Info->TarLUNBusy[lun] = 0;
currTar_Info->LunDiscQ_Idx[lun] = 0;
}
for (qtag = 0; qtag < QUEUE_DEPTH; qtag++)
{
if(FPT_BL_Card[p_card].discQ_Tbl[qtag] != NULL)
{
if(FPT_BL_Card[p_card].discQ_Tbl[qtag]->TargID == target)
{
FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
FPT_BL_Card[p_card].discQCount--;
}
}
}
}
/*---------------------------------------------------------------------
*
* Function: sfetm
*
* Description: Read in a message byte from the SCSI bus, and check
* for a parity error.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_sfm(ULONG port, PSCCB pCurrSCCB)
{
UCHAR message;
USHORT TimeOutLoop;
TimeOutLoop = 0;
while( (!(RD_HARPOON(port+hp_scsisig) & SCSI_REQ)) &&
(TimeOutLoop++ < 20000) ){}
WR_HARPOON(port+hp_portctrl_0, SCSI_PORT);
message = RD_HARPOON(port+hp_scsidata_0);
WR_HARPOON(port+hp_scsisig, SCSI_ACK + S_MSGI_PH);
if (TimeOutLoop > 20000)
message = 0x00; /* force message byte = 0 if Time Out on Req */
if ((RDW_HARPOON((port+hp_intstat)) & PARITY) &&
(RD_HARPOON(port+hp_addstat) & SCSI_PAR_ERR))
{
WR_HARPOON(port+hp_scsisig, (SCSI_ACK + S_ILL_PH));
WR_HARPOON(port+hp_xferstat, 0);
WR_HARPOON(port+hp_fiforead, 0);
WR_HARPOON(port+hp_fifowrite, 0);
if (pCurrSCCB != NULL)
{
pCurrSCCB->Sccb_scsimsg = SMPARITY;
}
message = 0x00;
do
{
ACCEPT_MSG_ATN(port);
TimeOutLoop = 0;
while( (!(RD_HARPOON(port+hp_scsisig) & SCSI_REQ)) &&
(TimeOutLoop++ < 20000) ){}
if (TimeOutLoop > 20000)
{
WRW_HARPOON((port+hp_intstat), PARITY);
return(message);
}
if ((RD_HARPOON(port+hp_scsisig) & S_SCSI_PHZ) != S_MSGI_PH)
{
WRW_HARPOON((port+hp_intstat), PARITY);
return(message);
}
WR_HARPOON(port+hp_portctrl_0, SCSI_PORT);
RD_HARPOON(port+hp_scsidata_0);
WR_HARPOON(port+hp_scsisig, (SCSI_ACK + S_ILL_PH));
}while(1);
}
WR_HARPOON(port+hp_scsisig, (SCSI_ACK + S_ILL_PH));
WR_HARPOON(port+hp_xferstat, 0);
WR_HARPOON(port+hp_fiforead, 0);
WR_HARPOON(port+hp_fifowrite, 0);
return(message);
}
/*---------------------------------------------------------------------
*
* Function: FPT_ssel
*
* Description: Load up automation and select target device.
*
*---------------------------------------------------------------------*/
static void FPT_ssel(ULONG port, UCHAR p_card)
{
UCHAR auto_loaded, i, target, *theCCB;
ULONG cdb_reg;
PSCCBcard CurrCard;
PSCCB currSCCB;
PSCCBMgr_tar_info currTar_Info;
UCHAR lastTag, lun;
CurrCard = &FPT_BL_Card[p_card];
currSCCB = CurrCard->currentSCCB;
target = currSCCB->TargID;
currTar_Info = &FPT_sccbMgrTbl[p_card][target];
lastTag = CurrCard->tagQ_Lst;
ARAM_ACCESS(port);
if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) == TAG_Q_REJECT)
currSCCB->ControlByte &= ~F_USE_CMD_Q;
if(((CurrCard->globalFlags & F_CONLUN_IO) &&
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
lun = currSCCB->Lun;
else
lun = 0;
if (CurrCard->globalFlags & F_TAG_STARTED)
{
if (!(currSCCB->ControlByte & F_USE_CMD_Q))
{
if ((currTar_Info->TarLUN_CA == 0)
&& ((currTar_Info->TarStatus & TAR_TAG_Q_MASK)
== TAG_Q_TRYING))
{
if (currTar_Info->TarTagQ_Cnt !=0)
{
currTar_Info->TarLUNBusy[lun] = 1;
FPT_queueSelectFail(CurrCard,p_card);
SGRAM_ACCESS(port);
return;
}
else {
currTar_Info->TarLUNBusy[lun] = 1;
}
} /*End non-tagged */
else {
currTar_Info->TarLUNBusy[lun] = 1;
}
} /*!Use cmd Q Tagged */
else {
if (currTar_Info->TarLUN_CA == 1)
{
FPT_queueSelectFail(CurrCard,p_card);
SGRAM_ACCESS(port);
return;
}
currTar_Info->TarLUNBusy[lun] = 1;
} /*else use cmd Q tagged */
} /*if glob tagged started */
else {
currTar_Info->TarLUNBusy[lun] = 1;
}
if((((CurrCard->globalFlags & F_CONLUN_IO) &&
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
|| (!(currSCCB->ControlByte & F_USE_CMD_Q))))
{
if(CurrCard->discQCount >= QUEUE_DEPTH)
{
currTar_Info->TarLUNBusy[lun] = 1;
FPT_queueSelectFail(CurrCard,p_card);
SGRAM_ACCESS(port);
return;
}
for (i = 1; i < QUEUE_DEPTH; i++)
{
if (++lastTag >= QUEUE_DEPTH) lastTag = 1;
if (CurrCard->discQ_Tbl[lastTag] == NULL)
{
CurrCard->tagQ_Lst = lastTag;
currTar_Info->LunDiscQ_Idx[lun] = lastTag;
CurrCard->discQ_Tbl[lastTag] = currSCCB;
CurrCard->discQCount++;
break;
}
}
if(i == QUEUE_DEPTH)
{
currTar_Info->TarLUNBusy[lun] = 1;
FPT_queueSelectFail(CurrCard,p_card);
SGRAM_ACCESS(port);
return;
}
}
auto_loaded = 0;
WR_HARPOON(port+hp_select_id, target);
WR_HARPOON(port+hp_gp_reg_3, target); /* Use by new automation logic */
if (currSCCB->OperationCode == RESET_COMMAND) {
WRW_HARPOON((port+ID_MSG_STRT), (MPM_OP+AMSG_OUT+
(currSCCB->Sccb_idmsg & ~DISC_PRIV)));
WRW_HARPOON((port+ID_MSG_STRT+2),BRH_OP+ALWAYS+NP);
currSCCB->Sccb_scsimsg = SMDEV_RESET;
WR_HARPOON(port+hp_autostart_3, (SELECT+SELCHK_STRT));
auto_loaded = 1;
currSCCB->Sccb_scsistat = SELECT_BDR_ST;
if (currTar_Info->TarEEValue & EE_SYNC_MASK)
{
currTar_Info->TarSyncCtrl = 0;
currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
}
if (currTar_Info->TarEEValue & EE_WIDE_SCSI)
{
currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
}
FPT_sssyncv(port, target, NARROW_SCSI,currTar_Info);
FPT_SccbMgrTableInitTarget(p_card, target);
}
else if(currSCCB->Sccb_scsistat == ABORT_ST)
{
WRW_HARPOON((port+ID_MSG_STRT), (MPM_OP+AMSG_OUT+
(currSCCB->Sccb_idmsg & ~DISC_PRIV)));
WRW_HARPOON((port+ID_MSG_STRT+2),BRH_OP+ALWAYS+CMDPZ);
WRW_HARPOON((port+SYNC_MSGS+0), (MPM_OP+AMSG_OUT+
(((UCHAR)(currSCCB->ControlByte & TAG_TYPE_MASK)
>> 6) | (UCHAR)0x20)));
WRW_HARPOON((port+SYNC_MSGS+2),
(MPM_OP+AMSG_OUT+currSCCB->Sccb_tag));
WRW_HARPOON((port+SYNC_MSGS+4), (BRH_OP+ALWAYS+NP ));
WR_HARPOON(port+hp_autostart_3, (SELECT+SELCHK_STRT));
auto_loaded = 1;
}
else if (!(currTar_Info->TarStatus & WIDE_NEGOCIATED)) {
auto_loaded = FPT_siwidn(port,p_card);
currSCCB->Sccb_scsistat = SELECT_WN_ST;
}
else if (!((currTar_Info->TarStatus & TAR_SYNC_MASK)
== SYNC_SUPPORTED)) {
auto_loaded = FPT_sisyncn(port,p_card, 0);
currSCCB->Sccb_scsistat = SELECT_SN_ST;
}
if (!auto_loaded)
{
if (currSCCB->ControlByte & F_USE_CMD_Q)
{
CurrCard->globalFlags |= F_TAG_STARTED;
if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK)
== TAG_Q_REJECT)
{
currSCCB->ControlByte &= ~F_USE_CMD_Q;
/* Fix up the start instruction with a jump to
Non-Tag-CMD handling */
WRW_HARPOON((port+ID_MSG_STRT),BRH_OP+ALWAYS+NTCMD);
WRW_HARPOON((port+NON_TAG_ID_MSG),
(MPM_OP+AMSG_OUT+currSCCB->Sccb_idmsg));
WR_HARPOON(port+hp_autostart_3, (SELECT+SELCHK_STRT));
/* Setup our STATE so we know what happend when
the wheels fall off. */
currSCCB->Sccb_scsistat = SELECT_ST;
currTar_Info->TarLUNBusy[lun] = 1;
}
else
{
WRW_HARPOON((port+ID_MSG_STRT), (MPM_OP+AMSG_OUT+currSCCB->Sccb_idmsg));
WRW_HARPOON((port+ID_MSG_STRT+2), (MPM_OP+AMSG_OUT+
(((UCHAR)(currSCCB->ControlByte & TAG_TYPE_MASK)
>> 6) | (UCHAR)0x20)));
for (i = 1; i < QUEUE_DEPTH; i++)
{
if (++lastTag >= QUEUE_DEPTH) lastTag = 1;
if (CurrCard->discQ_Tbl[lastTag] == NULL)
{
WRW_HARPOON((port+ID_MSG_STRT+6),
(MPM_OP+AMSG_OUT+lastTag));
CurrCard->tagQ_Lst = lastTag;
currSCCB->Sccb_tag = lastTag;
CurrCard->discQ_Tbl[lastTag] = currSCCB;
CurrCard->discQCount++;
break;
}
}
if ( i == QUEUE_DEPTH )
{
currTar_Info->TarLUNBusy[lun] = 1;
FPT_queueSelectFail(CurrCard,p_card);
SGRAM_ACCESS(port);
return;
}
currSCCB->Sccb_scsistat = SELECT_Q_ST;
WR_HARPOON(port+hp_autostart_3, (SELECT+SELCHK_STRT));
}
}
else
{
WRW_HARPOON((port+ID_MSG_STRT),BRH_OP+ALWAYS+NTCMD);
WRW_HARPOON((port+NON_TAG_ID_MSG),
(MPM_OP+AMSG_OUT+currSCCB->Sccb_idmsg));
currSCCB->Sccb_scsistat = SELECT_ST;
WR_HARPOON(port+hp_autostart_3, (SELECT+SELCHK_STRT));
}
theCCB = (UCHAR *)&currSCCB->Cdb[0];
cdb_reg = port + CMD_STRT;
for (i=0; i < currSCCB->CdbLength; i++)
{
WRW_HARPOON(cdb_reg, (MPM_OP + ACOMMAND + *theCCB));
cdb_reg +=2;
theCCB++;
}
if (currSCCB->CdbLength != TWELVE_BYTE_CMD)
WRW_HARPOON(cdb_reg, (BRH_OP+ALWAYS+ NP));
} /* auto_loaded */
WRW_HARPOON((port+hp_fiforead), (USHORT) 0x00);
WR_HARPOON(port+hp_xferstat, 0x00);
WRW_HARPOON((port+hp_intstat), (PROG_HLT | TIMEOUT | SEL | BUS_FREE));
WR_HARPOON(port+hp_portctrl_0,(SCSI_PORT));
if (!(currSCCB->Sccb_MGRFlags & F_DEV_SELECTED))
{
WR_HARPOON(port+hp_scsictrl_0, (SEL_TAR | ENA_ATN | ENA_RESEL | ENA_SCAM_SEL));
}
else
{
/* auto_loaded = (RD_HARPOON(port+hp_autostart_3) & (UCHAR)0x1F);
auto_loaded |= AUTO_IMMED; */
auto_loaded = AUTO_IMMED;
DISABLE_AUTO(port);
WR_HARPOON(port+hp_autostart_3, auto_loaded);
}
SGRAM_ACCESS(port);
}
/*---------------------------------------------------------------------
*
* Function: FPT_sres
*
* Description: Hookup the correct CCB and handle the incoming messages.
*
*---------------------------------------------------------------------*/
static void FPT_sres(ULONG port, UCHAR p_card, PSCCBcard pCurrCard)
{
UCHAR our_target, message, lun = 0, tag, msgRetryCount;
PSCCBMgr_tar_info currTar_Info;
PSCCB currSCCB;
if(pCurrCard->currentSCCB != NULL)
{
currTar_Info = &FPT_sccbMgrTbl[p_card][pCurrCard->currentSCCB->TargID];
DISABLE_AUTO(port);
WR_HARPOON((port+hp_scsictrl_0),(ENA_RESEL | ENA_SCAM_SEL));
currSCCB = pCurrCard->currentSCCB;
if(currSCCB->Sccb_scsistat == SELECT_WN_ST)
{
currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
currSCCB->Sccb_scsistat = BUS_FREE_ST;
}
if(currSCCB->Sccb_scsistat == SELECT_SN_ST)
{
currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
currSCCB->Sccb_scsistat = BUS_FREE_ST;
}
if(((pCurrCard->globalFlags & F_CONLUN_IO) &&
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
{
currTar_Info->TarLUNBusy[currSCCB->Lun] = 0;
if(currSCCB->Sccb_scsistat != ABORT_ST)
{
pCurrCard->discQCount--;
pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[currSCCB->Lun]]
= NULL;
}
}
else
{
currTar_Info->TarLUNBusy[0] = 0;
if(currSCCB->Sccb_tag)
{
if(currSCCB->Sccb_scsistat != ABORT_ST)
{
pCurrCard->discQCount--;
pCurrCard->discQ_Tbl[currSCCB->Sccb_tag] = NULL;
}
}else
{
if(currSCCB->Sccb_scsistat != ABORT_ST)
{
pCurrCard->discQCount--;
pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[0]] = NULL;
}
}
}
FPT_queueSelectFail(&FPT_BL_Card[p_card],p_card);
}
WRW_HARPOON((port+hp_fiforead), (USHORT) 0x00);
our_target = (UCHAR)(RD_HARPOON(port+hp_select_id) >> 4);
currTar_Info = &FPT_sccbMgrTbl[p_card][our_target];
msgRetryCount = 0;
do
{
currTar_Info = &FPT_sccbMgrTbl[p_card][our_target];
tag = 0;
while(!(RD_HARPOON(port+hp_scsisig) & SCSI_REQ))
{
if (! (RD_HARPOON(port+hp_scsisig) & SCSI_BSY))
{
WRW_HARPOON((port+hp_intstat), PHASE);
return;
}
}
WRW_HARPOON((port+hp_intstat), PHASE);
if ((RD_HARPOON(port+hp_scsisig) & S_SCSI_PHZ) == S_MSGI_PH)
{
message = FPT_sfm(port,pCurrCard->currentSCCB);
if (message)
{
if (message <= (0x80 | LUN_MASK))
{
lun = message & (UCHAR)LUN_MASK;
if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) == TAG_Q_TRYING)
{
if (currTar_Info->TarTagQ_Cnt != 0)
{
if (!(currTar_Info->TarLUN_CA))
{
ACCEPT_MSG(port); /*Release the ACK for ID msg. */
message = FPT_sfm(port,pCurrCard->currentSCCB);
if (message)
{
ACCEPT_MSG(port);
}
else
message = 0;
if(message != 0)
{
tag = FPT_sfm(port,pCurrCard->currentSCCB);
if (!(tag))
message = 0;
}
} /*C.A. exists! */
} /*End Q cnt != 0 */
} /*End Tag cmds supported! */
} /*End valid ID message. */
else
{
ACCEPT_MSG_ATN(port);
}
} /* End good id message. */
else
{
message = 0;
}
}
else
{
ACCEPT_MSG_ATN(port);
while (!(RDW_HARPOON((port+hp_intstat)) & (PHASE | RESET)) &&
!(RD_HARPOON(port+hp_scsisig) & SCSI_REQ) &&
(RD_HARPOON(port+hp_scsisig) & SCSI_BSY)) ;
return;
}
if(message == 0)
{
msgRetryCount++;
if(msgRetryCount == 1)
{
FPT_SendMsg(port, SMPARITY);
}
else
{
FPT_SendMsg(port, SMDEV_RESET);
FPT_sssyncv(port, our_target, NARROW_SCSI,currTar_Info);
if (FPT_sccbMgrTbl[p_card][our_target].TarEEValue & EE_SYNC_MASK)
{
FPT_sccbMgrTbl[p_card][our_target].TarStatus &= ~TAR_SYNC_MASK;
}
if (FPT_sccbMgrTbl[p_card][our_target].TarEEValue & EE_WIDE_SCSI)
{
FPT_sccbMgrTbl[p_card][our_target].TarStatus &= ~TAR_WIDE_MASK;
}
FPT_queueFlushTargSccb(p_card, our_target, SCCB_COMPLETE);
FPT_SccbMgrTableInitTarget(p_card,our_target);
return;
}
}
}while(message == 0);
if(((pCurrCard->globalFlags & F_CONLUN_IO) &&
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
{
currTar_Info->TarLUNBusy[lun] = 1;
pCurrCard->currentSCCB = pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[lun]];
if(pCurrCard->currentSCCB != NULL)
{
ACCEPT_MSG(port);
}
else
{
ACCEPT_MSG_ATN(port);
}
}
else
{
currTar_Info->TarLUNBusy[0] = 1;
if (tag)
{
if (pCurrCard->discQ_Tbl[tag] != NULL)
{
pCurrCard->currentSCCB = pCurrCard->discQ_Tbl[tag];
currTar_Info->TarTagQ_Cnt--;
ACCEPT_MSG(port);
}
else
{
ACCEPT_MSG_ATN(port);
}
}else
{
pCurrCard->currentSCCB = pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[0]];
if(pCurrCard->currentSCCB != NULL)
{
ACCEPT_MSG(port);
}
else
{
ACCEPT_MSG_ATN(port);
}
}
}
if(pCurrCard->currentSCCB != NULL)
{
if(pCurrCard->currentSCCB->Sccb_scsistat == ABORT_ST)
{
/* During Abort Tag command, the target could have got re-selected
and completed the command. Check the select Q and remove the CCB
if it is in the Select Q */
FPT_queueFindSccb(pCurrCard->currentSCCB, p_card);
}
}
while (!(RDW_HARPOON((port+hp_intstat)) & (PHASE | RESET)) &&
!(RD_HARPOON(port+hp_scsisig) & SCSI_REQ) &&
(RD_HARPOON(port+hp_scsisig) & SCSI_BSY)) ;
}
static void FPT_SendMsg(ULONG port, UCHAR message)
{
while(!(RD_HARPOON(port+hp_scsisig) & SCSI_REQ))
{
if (! (RD_HARPOON(port+hp_scsisig) & SCSI_BSY))
{
WRW_HARPOON((port+hp_intstat), PHASE);
return;
}
}
WRW_HARPOON((port+hp_intstat), PHASE);
if ((RD_HARPOON(port+hp_scsisig) & S_SCSI_PHZ) == S_MSGO_PH)
{
WRW_HARPOON((port+hp_intstat), (BUS_FREE | PHASE | XFER_CNT_0));
WR_HARPOON(port+hp_portctrl_0, SCSI_BUS_EN);
WR_HARPOON(port+hp_scsidata_0,message);
WR_HARPOON(port+hp_scsisig, (SCSI_ACK + S_ILL_PH));
ACCEPT_MSG(port);
WR_HARPOON(port+hp_portctrl_0, 0x00);
if ((message == SMABORT) || (message == SMDEV_RESET) ||
(message == SMABORT_TAG) )
{
while(!(RDW_HARPOON((port+hp_intstat)) & (BUS_FREE | PHASE))) {}
if (RDW_HARPOON((port+hp_intstat)) & BUS_FREE)
{
WRW_HARPOON((port+hp_intstat), BUS_FREE);
}
}
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_sdecm
*
* Description: Determine the proper responce to the message from the
* target device.
*
*---------------------------------------------------------------------*/
static void FPT_sdecm(UCHAR message, ULONG port, UCHAR p_card)
{
PSCCB currSCCB;
PSCCBcard CurrCard;
PSCCBMgr_tar_info currTar_Info;
CurrCard = &FPT_BL_Card[p_card];
currSCCB = CurrCard->currentSCCB;
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
if (message == SMREST_DATA_PTR)
{
if (!(currSCCB->Sccb_XferState & F_NO_DATA_YET))
{
currSCCB->Sccb_ATC = currSCCB->Sccb_savedATC;
FPT_hostDataXferRestart(currSCCB);
}
ACCEPT_MSG(port);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
else if (message == SMCMD_COMP)
{
if (currSCCB->Sccb_scsistat == SELECT_Q_ST)
{
currTar_Info->TarStatus &= ~(UCHAR)TAR_TAG_Q_MASK;
currTar_Info->TarStatus |= (UCHAR)TAG_Q_REJECT;
}
ACCEPT_MSG(port);
}
else if ((message == SMNO_OP) || (message >= SMIDENT)
|| (message == SMINIT_RECOVERY) || (message == SMREL_RECOVERY))
{
ACCEPT_MSG(port);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
else if (message == SMREJECT)
{
if ((currSCCB->Sccb_scsistat == SELECT_SN_ST) ||
(currSCCB->Sccb_scsistat == SELECT_WN_ST) ||
((currTar_Info->TarStatus & TAR_SYNC_MASK) == SYNC_TRYING ) ||
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) == TAG_Q_TRYING ) )
{
WRW_HARPOON((port+hp_intstat), BUS_FREE);
ACCEPT_MSG(port);
while ((!(RD_HARPOON(port+hp_scsisig) & SCSI_REQ)) &&
(!(RDW_HARPOON((port+hp_intstat)) & BUS_FREE))) {}
if(currSCCB->Lun == 0x00)
{
if ((currSCCB->Sccb_scsistat == SELECT_SN_ST))
{
currTar_Info->TarStatus |= (UCHAR)SYNC_SUPPORTED;
currTar_Info->TarEEValue &= ~EE_SYNC_MASK;
}
else if ((currSCCB->Sccb_scsistat == SELECT_WN_ST))
{
currTar_Info->TarStatus = (currTar_Info->TarStatus &
~WIDE_ENABLED) | WIDE_NEGOCIATED;
currTar_Info->TarEEValue &= ~EE_WIDE_SCSI;
}
else if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) == TAG_Q_TRYING )
{
currTar_Info->TarStatus = (currTar_Info->TarStatus &
~(UCHAR)TAR_TAG_Q_MASK) | TAG_Q_REJECT;
currSCCB->ControlByte &= ~F_USE_CMD_Q;
CurrCard->discQCount--;
CurrCard->discQ_Tbl[currSCCB->Sccb_tag] = NULL;
currSCCB->Sccb_tag = 0x00;
}
}
if (RDW_HARPOON((port+hp_intstat)) & BUS_FREE)
{
if(currSCCB->Lun == 0x00)
{
WRW_HARPOON((port+hp_intstat), BUS_FREE);
CurrCard->globalFlags |= F_NEW_SCCB_CMD;
}
}
else
{
if((CurrCard->globalFlags & F_CONLUN_IO) &&
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
currTar_Info->TarLUNBusy[currSCCB->Lun] = 1;
else
currTar_Info->TarLUNBusy[0] = 1;
currSCCB->ControlByte &= ~(UCHAR)F_USE_CMD_Q;
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
}
else
{
ACCEPT_MSG(port);
while ((!(RD_HARPOON(port+hp_scsisig) & SCSI_REQ)) &&
(!(RDW_HARPOON((port+hp_intstat)) & BUS_FREE))) {}
if (!(RDW_HARPOON((port+hp_intstat)) & BUS_FREE))
{
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
}
}
else if (message == SMEXT)
{
ACCEPT_MSG(port);
FPT_shandem(port,p_card,currSCCB);
}
else if (message == SMIGNORWR)
{
ACCEPT_MSG(port); /* ACK the RESIDUE MSG */
message = FPT_sfm(port,currSCCB);
if(currSCCB->Sccb_scsimsg != SMPARITY)
ACCEPT_MSG(port);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
else
{
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
currSCCB->Sccb_scsimsg = SMREJECT;
ACCEPT_MSG_ATN(port);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_shandem
*
* Description: Decide what to do with the extended message.
*
*---------------------------------------------------------------------*/
static void FPT_shandem(ULONG port, UCHAR p_card, PSCCB pCurrSCCB)
{
UCHAR length,message;
length = FPT_sfm(port,pCurrSCCB);
if (length)
{
ACCEPT_MSG(port);
message = FPT_sfm(port,pCurrSCCB);
if (message)
{
if (message == SMSYNC)
{
if (length == 0x03)
{
ACCEPT_MSG(port);
FPT_stsyncn(port,p_card);
}
else
{
pCurrSCCB->Sccb_scsimsg = SMREJECT;
ACCEPT_MSG_ATN(port);
}
}
else if (message == SMWDTR)
{
if (length == 0x02)
{
ACCEPT_MSG(port);
FPT_stwidn(port,p_card);
}
else
{
pCurrSCCB->Sccb_scsimsg = SMREJECT;
ACCEPT_MSG_ATN(port);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
}
else
{
pCurrSCCB->Sccb_scsimsg = SMREJECT;
ACCEPT_MSG_ATN(port);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
}
else
{
if(pCurrSCCB->Sccb_scsimsg != SMPARITY)
ACCEPT_MSG(port);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
}else
{
if(pCurrSCCB->Sccb_scsimsg == SMPARITY)
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_sisyncn
*
* Description: Read in a message byte from the SCSI bus, and check
* for a parity error.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_sisyncn(ULONG port, UCHAR p_card, UCHAR syncFlag)
{
PSCCB currSCCB;
PSCCBMgr_tar_info currTar_Info;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
if (!((currTar_Info->TarStatus & TAR_SYNC_MASK) == SYNC_TRYING)) {
WRW_HARPOON((port+ID_MSG_STRT),
(MPM_OP+AMSG_OUT+(currSCCB->Sccb_idmsg & ~(UCHAR)DISC_PRIV)));
WRW_HARPOON((port+ID_MSG_STRT+2),BRH_OP+ALWAYS+CMDPZ);
WRW_HARPOON((port+SYNC_MSGS+0), (MPM_OP+AMSG_OUT+SMEXT ));
WRW_HARPOON((port+SYNC_MSGS+2), (MPM_OP+AMSG_OUT+0x03 ));
WRW_HARPOON((port+SYNC_MSGS+4), (MPM_OP+AMSG_OUT+SMSYNC));
if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_20MB)
WRW_HARPOON((port+SYNC_MSGS+6), (MPM_OP+AMSG_OUT+ 12));
else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_10MB)
WRW_HARPOON((port+SYNC_MSGS+6), (MPM_OP+AMSG_OUT+ 25));
else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_5MB)
WRW_HARPOON((port+SYNC_MSGS+6), (MPM_OP+AMSG_OUT+ 50));
else
WRW_HARPOON((port+SYNC_MSGS+6), (MPM_OP+AMSG_OUT+ 00));
WRW_HARPOON((port+SYNC_MSGS+8), (RAT_OP ));
WRW_HARPOON((port+SYNC_MSGS+10),(MPM_OP+AMSG_OUT+DEFAULT_OFFSET));
WRW_HARPOON((port+SYNC_MSGS+12),(BRH_OP+ALWAYS+NP ));
if(syncFlag == 0)
{
WR_HARPOON(port+hp_autostart_3, (SELECT+SELCHK_STRT));
currTar_Info->TarStatus = ((currTar_Info->TarStatus &
~(UCHAR)TAR_SYNC_MASK) | (UCHAR)SYNC_TRYING);
}
else
{
WR_HARPOON(port+hp_autostart_3, (AUTO_IMMED + CMD_ONLY_STRT));
}
return(1);
}
else {
currTar_Info->TarStatus |= (UCHAR)SYNC_SUPPORTED;
currTar_Info->TarEEValue &= ~EE_SYNC_MASK;
return(0);
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_stsyncn
*
* Description: The has sent us a Sync Nego message so handle it as
* necessary.
*
*---------------------------------------------------------------------*/
static void FPT_stsyncn(ULONG port, UCHAR p_card)
{
UCHAR sync_msg,offset,sync_reg,our_sync_msg;
PSCCB currSCCB;
PSCCBMgr_tar_info currTar_Info;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
sync_msg = FPT_sfm(port,currSCCB);
if((sync_msg == 0x00) && (currSCCB->Sccb_scsimsg == SMPARITY))
{
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
return;
}
ACCEPT_MSG(port);
offset = FPT_sfm(port,currSCCB);
if((offset == 0x00) && (currSCCB->Sccb_scsimsg == SMPARITY))
{
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
return;
}
if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_20MB)
our_sync_msg = 12; /* Setup our Message to 20mb/s */
else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_10MB)
our_sync_msg = 25; /* Setup our Message to 10mb/s */
else if ((currTar_Info->TarEEValue & EE_SYNC_MASK) == EE_SYNC_5MB)
our_sync_msg = 50; /* Setup our Message to 5mb/s */
else
our_sync_msg = 0; /* Message = Async */
if (sync_msg < our_sync_msg) {
sync_msg = our_sync_msg; /*if faster, then set to max. */
}
if (offset == ASYNC)
sync_msg = ASYNC;
if (offset > MAX_OFFSET)
offset = MAX_OFFSET;
sync_reg = 0x00;
if (sync_msg > 12)
sync_reg = 0x20; /* Use 10MB/s */
if (sync_msg > 25)
sync_reg = 0x40; /* Use 6.6MB/s */
if (sync_msg > 38)
sync_reg = 0x60; /* Use 5MB/s */
if (sync_msg > 50)
sync_reg = 0x80; /* Use 4MB/s */
if (sync_msg > 62)
sync_reg = 0xA0; /* Use 3.33MB/s */
if (sync_msg > 75)
sync_reg = 0xC0; /* Use 2.85MB/s */
if (sync_msg > 87)
sync_reg = 0xE0; /* Use 2.5MB/s */
if (sync_msg > 100) {
sync_reg = 0x00; /* Use ASYNC */
offset = 0x00;
}
if (currTar_Info->TarStatus & WIDE_ENABLED)
sync_reg |= offset;
else
sync_reg |= (offset | NARROW_SCSI);
FPT_sssyncv(port,currSCCB->TargID,sync_reg,currTar_Info);
if (currSCCB->Sccb_scsistat == SELECT_SN_ST) {
ACCEPT_MSG(port);
currTar_Info->TarStatus = ((currTar_Info->TarStatus &
~(UCHAR)TAR_SYNC_MASK) | (UCHAR)SYNC_SUPPORTED);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
else {
ACCEPT_MSG_ATN(port);
FPT_sisyncr(port,sync_msg,offset);
currTar_Info->TarStatus = ((currTar_Info->TarStatus &
~(UCHAR)TAR_SYNC_MASK) | (UCHAR)SYNC_SUPPORTED);
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_sisyncr
*
* Description: Answer the targets sync message.
*
*---------------------------------------------------------------------*/
static void FPT_sisyncr(ULONG port,UCHAR sync_pulse, UCHAR offset)
{
ARAM_ACCESS(port);
WRW_HARPOON((port+SYNC_MSGS+0), (MPM_OP+AMSG_OUT+SMEXT ));
WRW_HARPOON((port+SYNC_MSGS+2), (MPM_OP+AMSG_OUT+0x03 ));
WRW_HARPOON((port+SYNC_MSGS+4), (MPM_OP+AMSG_OUT+SMSYNC));
WRW_HARPOON((port+SYNC_MSGS+6), (MPM_OP+AMSG_OUT+sync_pulse));
WRW_HARPOON((port+SYNC_MSGS+8), (RAT_OP ));
WRW_HARPOON((port+SYNC_MSGS+10),(MPM_OP+AMSG_OUT+offset));
WRW_HARPOON((port+SYNC_MSGS+12),(BRH_OP+ALWAYS+NP ));
SGRAM_ACCESS(port);
WR_HARPOON(port+hp_portctrl_0, SCSI_PORT);
WRW_HARPOON((port+hp_intstat), CLR_ALL_INT_1);
WR_HARPOON(port+hp_autostart_3, (AUTO_IMMED+CMD_ONLY_STRT));
while (!(RDW_HARPOON((port+hp_intstat)) & (BUS_FREE | AUTO_INT))) {}
}
/*---------------------------------------------------------------------
*
* Function: FPT_siwidn
*
* Description: Read in a message byte from the SCSI bus, and check
* for a parity error.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_siwidn(ULONG port, UCHAR p_card)
{
PSCCB currSCCB;
PSCCBMgr_tar_info currTar_Info;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
if (!((currTar_Info->TarStatus & TAR_WIDE_MASK) == WIDE_NEGOCIATED)) {
WRW_HARPOON((port+ID_MSG_STRT),
(MPM_OP+AMSG_OUT+(currSCCB->Sccb_idmsg & ~(UCHAR)DISC_PRIV)));
WRW_HARPOON((port+ID_MSG_STRT+2),BRH_OP+ALWAYS+CMDPZ);
WRW_HARPOON((port+SYNC_MSGS+0), (MPM_OP+AMSG_OUT+SMEXT ));
WRW_HARPOON((port+SYNC_MSGS+2), (MPM_OP+AMSG_OUT+0x02 ));
WRW_HARPOON((port+SYNC_MSGS+4), (MPM_OP+AMSG_OUT+SMWDTR));
WRW_HARPOON((port+SYNC_MSGS+6), (RAT_OP ));
WRW_HARPOON((port+SYNC_MSGS+8), (MPM_OP+AMSG_OUT+ SM16BIT));
WRW_HARPOON((port+SYNC_MSGS+10),(BRH_OP+ALWAYS+NP ));
WR_HARPOON(port+hp_autostart_3, (SELECT+SELCHK_STRT));
currTar_Info->TarStatus = ((currTar_Info->TarStatus &
~(UCHAR)TAR_WIDE_MASK) | (UCHAR)WIDE_ENABLED);
return(1);
}
else {
currTar_Info->TarStatus = ((currTar_Info->TarStatus &
~(UCHAR)TAR_WIDE_MASK) | WIDE_NEGOCIATED);
currTar_Info->TarEEValue &= ~EE_WIDE_SCSI;
return(0);
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_stwidn
*
* Description: The has sent us a Wide Nego message so handle it as
* necessary.
*
*---------------------------------------------------------------------*/
static void FPT_stwidn(ULONG port, UCHAR p_card)
{
UCHAR width;
PSCCB currSCCB;
PSCCBMgr_tar_info currTar_Info;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
currTar_Info = &FPT_sccbMgrTbl[p_card][currSCCB->TargID];
width = FPT_sfm(port,currSCCB);
if((width == 0x00) && (currSCCB->Sccb_scsimsg == SMPARITY))
{
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
return;
}
if (!(currTar_Info->TarEEValue & EE_WIDE_SCSI))
width = 0;
if (width) {
currTar_Info->TarStatus |= WIDE_ENABLED;
width = 0;
}
else {
width = NARROW_SCSI;
currTar_Info->TarStatus &= ~WIDE_ENABLED;
}
FPT_sssyncv(port,currSCCB->TargID,width,currTar_Info);
if (currSCCB->Sccb_scsistat == SELECT_WN_ST)
{
currTar_Info->TarStatus |= WIDE_NEGOCIATED;
if (!((currTar_Info->TarStatus & TAR_SYNC_MASK) == SYNC_SUPPORTED))
{
ACCEPT_MSG_ATN(port);
ARAM_ACCESS(port);
FPT_sisyncn(port,p_card, 1);
currSCCB->Sccb_scsistat = SELECT_SN_ST;
SGRAM_ACCESS(port);
}
else
{
ACCEPT_MSG(port);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
}
else {
ACCEPT_MSG_ATN(port);
if (currTar_Info->TarEEValue & EE_WIDE_SCSI)
width = SM16BIT;
else
width = SM8BIT;
FPT_siwidr(port,width);
currTar_Info->TarStatus |= (WIDE_NEGOCIATED | WIDE_ENABLED);
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_siwidr
*
* Description: Answer the targets Wide nego message.
*
*---------------------------------------------------------------------*/
static void FPT_siwidr(ULONG port, UCHAR width)
{
ARAM_ACCESS(port);
WRW_HARPOON((port+SYNC_MSGS+0), (MPM_OP+AMSG_OUT+SMEXT ));
WRW_HARPOON((port+SYNC_MSGS+2), (MPM_OP+AMSG_OUT+0x02 ));
WRW_HARPOON((port+SYNC_MSGS+4), (MPM_OP+AMSG_OUT+SMWDTR));
WRW_HARPOON((port+SYNC_MSGS+6), (RAT_OP ));
WRW_HARPOON((port+SYNC_MSGS+8),(MPM_OP+AMSG_OUT+width));
WRW_HARPOON((port+SYNC_MSGS+10),(BRH_OP+ALWAYS+NP ));
SGRAM_ACCESS(port);
WR_HARPOON(port+hp_portctrl_0, SCSI_PORT);
WRW_HARPOON((port+hp_intstat), CLR_ALL_INT_1);
WR_HARPOON(port+hp_autostart_3, (AUTO_IMMED+CMD_ONLY_STRT));
while (!(RDW_HARPOON((port+hp_intstat)) & (BUS_FREE | AUTO_INT))) {}
}
/*---------------------------------------------------------------------
*
* Function: FPT_sssyncv
*
* Description: Write the desired value to the Sync Register for the
* ID specified.
*
*---------------------------------------------------------------------*/
static void FPT_sssyncv(ULONG p_port, UCHAR p_id, UCHAR p_sync_value,
PSCCBMgr_tar_info currTar_Info)
{
UCHAR index;
index = p_id;
switch (index) {
case 0:
index = 12; /* hp_synctarg_0 */
break;
case 1:
index = 13; /* hp_synctarg_1 */
break;
case 2:
index = 14; /* hp_synctarg_2 */
break;
case 3:
index = 15; /* hp_synctarg_3 */
break;
case 4:
index = 8; /* hp_synctarg_4 */
break;
case 5:
index = 9; /* hp_synctarg_5 */
break;
case 6:
index = 10; /* hp_synctarg_6 */
break;
case 7:
index = 11; /* hp_synctarg_7 */
break;
case 8:
index = 4; /* hp_synctarg_8 */
break;
case 9:
index = 5; /* hp_synctarg_9 */
break;
case 10:
index = 6; /* hp_synctarg_10 */
break;
case 11:
index = 7; /* hp_synctarg_11 */
break;
case 12:
index = 0; /* hp_synctarg_12 */
break;
case 13:
index = 1; /* hp_synctarg_13 */
break;
case 14:
index = 2; /* hp_synctarg_14 */
break;
case 15:
index = 3; /* hp_synctarg_15 */
}
WR_HARPOON(p_port+hp_synctarg_base+index, p_sync_value);
currTar_Info->TarSyncCtrl = p_sync_value;
}
/*---------------------------------------------------------------------
*
* Function: FPT_sresb
*
* Description: Reset the desired card's SCSI bus.
*
*---------------------------------------------------------------------*/
static void FPT_sresb(ULONG port, UCHAR p_card)
{
UCHAR scsiID, i;
PSCCBMgr_tar_info currTar_Info;
WR_HARPOON(port+hp_page_ctrl,
(RD_HARPOON(port+hp_page_ctrl) | G_INT_DISABLE));
WRW_HARPOON((port+hp_intstat), CLR_ALL_INT);
WR_HARPOON(port+hp_scsictrl_0, SCSI_RST);
scsiID = RD_HARPOON(port+hp_seltimeout);
WR_HARPOON(port+hp_seltimeout,TO_5ms);
WRW_HARPOON((port+hp_intstat), TIMEOUT);
WR_HARPOON(port+hp_portctrl_0,(SCSI_PORT | START_TO));
while (!(RDW_HARPOON((port+hp_intstat)) & TIMEOUT)) {}
WR_HARPOON(port+hp_seltimeout,scsiID);
WR_HARPOON(port+hp_scsictrl_0, ENA_SCAM_SEL);
FPT_Wait(port, TO_5ms);
WRW_HARPOON((port+hp_intstat), CLR_ALL_INT);
WR_HARPOON(port+hp_int_mask, (RD_HARPOON(port+hp_int_mask) | 0x00));
for (scsiID = 0; scsiID < MAX_SCSI_TAR; scsiID++)
{
currTar_Info = &FPT_sccbMgrTbl[p_card][scsiID];
if (currTar_Info->TarEEValue & EE_SYNC_MASK)
{
currTar_Info->TarSyncCtrl = 0;
currTar_Info->TarStatus &= ~TAR_SYNC_MASK;
}
if (currTar_Info->TarEEValue & EE_WIDE_SCSI)
{
currTar_Info->TarStatus &= ~TAR_WIDE_MASK;
}
FPT_sssyncv(port, scsiID, NARROW_SCSI,currTar_Info);
FPT_SccbMgrTableInitTarget(p_card, scsiID);
}
FPT_BL_Card[p_card].scanIndex = 0x00;
FPT_BL_Card[p_card].currentSCCB = NULL;
FPT_BL_Card[p_card].globalFlags &= ~(F_TAG_STARTED | F_HOST_XFER_ACT
| F_NEW_SCCB_CMD);
FPT_BL_Card[p_card].cmdCounter = 0x00;
FPT_BL_Card[p_card].discQCount = 0x00;
FPT_BL_Card[p_card].tagQ_Lst = 0x01;
for(i = 0; i < QUEUE_DEPTH; i++)
FPT_BL_Card[p_card].discQ_Tbl[i] = NULL;
WR_HARPOON(port+hp_page_ctrl,
(RD_HARPOON(port+hp_page_ctrl) & ~G_INT_DISABLE));
}
/*---------------------------------------------------------------------
*
* Function: FPT_ssenss
*
* Description: Setup for the Auto Sense command.
*
*---------------------------------------------------------------------*/
static void FPT_ssenss(PSCCBcard pCurrCard)
{
UCHAR i;
PSCCB currSCCB;
currSCCB = pCurrCard->currentSCCB;
currSCCB->Save_CdbLen = currSCCB->CdbLength;
for (i = 0; i < 6; i++) {
currSCCB->Save_Cdb[i] = currSCCB->Cdb[i];
}
currSCCB->CdbLength = SIX_BYTE_CMD;
currSCCB->Cdb[0] = SCSI_REQUEST_SENSE;
currSCCB->Cdb[1] = currSCCB->Cdb[1] & (UCHAR)0xE0; /*Keep LUN. */
currSCCB->Cdb[2] = 0x00;
currSCCB->Cdb[3] = 0x00;
currSCCB->Cdb[4] = currSCCB->RequestSenseLength;
currSCCB->Cdb[5] = 0x00;
currSCCB->Sccb_XferCnt = (unsigned long)currSCCB->RequestSenseLength;
currSCCB->Sccb_ATC = 0x00;
currSCCB->Sccb_XferState |= F_AUTO_SENSE;
currSCCB->Sccb_XferState &= ~F_SG_XFER;
currSCCB->Sccb_idmsg = currSCCB->Sccb_idmsg & ~(UCHAR)DISC_PRIV;
currSCCB->ControlByte = 0x00;
currSCCB->Sccb_MGRFlags &= F_STATUSLOADED;
}
/*---------------------------------------------------------------------
*
* Function: FPT_sxfrp
*
* Description: Transfer data into the bit bucket until the device
* decides to switch phase.
*
*---------------------------------------------------------------------*/
static void FPT_sxfrp(ULONG p_port, UCHAR p_card)
{
UCHAR curr_phz;
DISABLE_AUTO(p_port);
if (FPT_BL_Card[p_card].globalFlags & F_HOST_XFER_ACT) {
FPT_hostDataXferAbort(p_port,p_card,FPT_BL_Card[p_card].currentSCCB);
}
/* If the Automation handled the end of the transfer then do not
match the phase or we will get out of sync with the ISR. */
if (RDW_HARPOON((p_port+hp_intstat)) & (BUS_FREE | XFER_CNT_0 | AUTO_INT))
return;
WR_HARPOON(p_port+hp_xfercnt_0, 0x00);
curr_phz = RD_HARPOON(p_port+hp_scsisig) & (UCHAR)S_SCSI_PHZ;
WRW_HARPOON((p_port+hp_intstat), XFER_CNT_0);
WR_HARPOON(p_port+hp_scsisig, curr_phz);
while ( !(RDW_HARPOON((p_port+hp_intstat)) & (BUS_FREE | RESET)) &&
(curr_phz == (RD_HARPOON(p_port+hp_scsisig) & (UCHAR)S_SCSI_PHZ)) )
{
if (curr_phz & (UCHAR)SCSI_IOBIT)
{
WR_HARPOON(p_port+hp_portctrl_0, (SCSI_PORT | HOST_PORT | SCSI_INBIT));
if (!(RD_HARPOON(p_port+hp_xferstat) & FIFO_EMPTY))
{
RD_HARPOON(p_port+hp_fifodata_0);
}
}
else
{
WR_HARPOON(p_port+hp_portctrl_0, (SCSI_PORT | HOST_PORT | HOST_WRT));
if (RD_HARPOON(p_port+hp_xferstat) & FIFO_EMPTY)
{
WR_HARPOON(p_port+hp_fifodata_0,0xFA);
}
}
} /* End of While loop for padding data I/O phase */
while ( !(RDW_HARPOON((p_port+hp_intstat)) & (BUS_FREE | RESET)))
{
if (RD_HARPOON(p_port+hp_scsisig) & SCSI_REQ)
break;
}
WR_HARPOON(p_port+hp_portctrl_0, (SCSI_PORT | HOST_PORT | SCSI_INBIT));
while (!(RD_HARPOON(p_port+hp_xferstat) & FIFO_EMPTY))
{
RD_HARPOON(p_port+hp_fifodata_0);
}
if ( !(RDW_HARPOON((p_port+hp_intstat)) & (BUS_FREE | RESET)))
{
WR_HARPOON(p_port+hp_autostart_0, (AUTO_IMMED+DISCONNECT_START));
while (!(RDW_HARPOON((p_port+hp_intstat)) & AUTO_INT)) {}
if (RDW_HARPOON((p_port+hp_intstat)) & (ICMD_COMP | ITAR_DISC))
while (!(RDW_HARPOON((p_port+hp_intstat)) & (BUS_FREE | RSEL))) ;
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_schkdd
*
* Description: Make sure data has been flushed from both FIFOs and abort
* the operations if necessary.
*
*---------------------------------------------------------------------*/
static void FPT_schkdd(ULONG port, UCHAR p_card)
{
USHORT TimeOutLoop;
UCHAR sPhase;
PSCCB currSCCB;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
if ((currSCCB->Sccb_scsistat != DATA_OUT_ST) &&
(currSCCB->Sccb_scsistat != DATA_IN_ST)) {
return;
}
if (currSCCB->Sccb_XferState & F_ODD_BALL_CNT)
{
currSCCB->Sccb_ATC += (currSCCB->Sccb_XferCnt-1);
currSCCB->Sccb_XferCnt = 1;
currSCCB->Sccb_XferState &= ~F_ODD_BALL_CNT;
WRW_HARPOON((port+hp_fiforead), (USHORT) 0x00);
WR_HARPOON(port+hp_xferstat, 0x00);
}
else
{
currSCCB->Sccb_ATC += currSCCB->Sccb_XferCnt;
currSCCB->Sccb_XferCnt = 0;
}
if ((RDW_HARPOON((port+hp_intstat)) & PARITY) &&
(currSCCB->HostStatus == SCCB_COMPLETE)) {
currSCCB->HostStatus = SCCB_PARITY_ERR;
WRW_HARPOON((port+hp_intstat), PARITY);
}
FPT_hostDataXferAbort(port,p_card,currSCCB);
while (RD_HARPOON(port+hp_scsisig) & SCSI_ACK) {}
TimeOutLoop = 0;
while(RD_HARPOON(port+hp_xferstat) & FIFO_EMPTY)
{
if (RDW_HARPOON((port+hp_intstat)) & BUS_FREE) {
return;
}
if (RD_HARPOON(port+hp_offsetctr) & (UCHAR)0x1F) {
break;
}
if (RDW_HARPOON((port+hp_intstat)) & RESET) {
return;
}
if ((RD_HARPOON(port+hp_scsisig) & SCSI_REQ) || (TimeOutLoop++>0x3000) )
break;
}
sPhase = RD_HARPOON(port+hp_scsisig) & (SCSI_BSY | S_SCSI_PHZ);
if ((!(RD_HARPOON(port+hp_xferstat) & FIFO_EMPTY)) ||
(RD_HARPOON(port+hp_offsetctr) & (UCHAR)0x1F) ||
(sPhase == (SCSI_BSY | S_DATAO_PH)) ||
(sPhase == (SCSI_BSY | S_DATAI_PH)))
{
WR_HARPOON(port+hp_portctrl_0, SCSI_PORT);
if (!(currSCCB->Sccb_XferState & F_ALL_XFERRED))
{
if (currSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
FPT_phaseDataIn(port,p_card);
}
else {
FPT_phaseDataOut(port,p_card);
}
}
else
{
FPT_sxfrp(port,p_card);
if (!(RDW_HARPOON((port+hp_intstat)) &
(BUS_FREE | ICMD_COMP | ITAR_DISC | RESET)))
{
WRW_HARPOON((port+hp_intstat), AUTO_INT);
FPT_phaseDecode(port,p_card);
}
}
}
else {
WR_HARPOON(port+hp_portctrl_0, 0x00);
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_sinits
*
* Description: Setup SCCB manager fields in this SCCB.
*
*---------------------------------------------------------------------*/
static void FPT_sinits(PSCCB p_sccb, UCHAR p_card)
{
PSCCBMgr_tar_info currTar_Info;
if((p_sccb->TargID > MAX_SCSI_TAR) || (p_sccb->Lun > MAX_LUN))
{
return;
}
currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
p_sccb->Sccb_XferState = 0x00;
p_sccb->Sccb_XferCnt = p_sccb->DataLength;
if ((p_sccb->OperationCode == SCATTER_GATHER_COMMAND) ||
(p_sccb->OperationCode == RESIDUAL_SG_COMMAND)) {
p_sccb->Sccb_SGoffset = 0;
p_sccb->Sccb_XferState = F_SG_XFER;
p_sccb->Sccb_XferCnt = 0x00;
}
if (p_sccb->DataLength == 0x00)
p_sccb->Sccb_XferState |= F_ALL_XFERRED;
if (p_sccb->ControlByte & F_USE_CMD_Q)
{
if ((currTar_Info->TarStatus & TAR_TAG_Q_MASK) == TAG_Q_REJECT)
p_sccb->ControlByte &= ~F_USE_CMD_Q;
else
currTar_Info->TarStatus |= TAG_Q_TRYING;
}
/* For !single SCSI device in system & device allow Disconnect
or command is tag_q type then send Cmd with Disconnect Enable
else send Cmd with Disconnect Disable */
/*
if (((!(FPT_BL_Card[p_card].globalFlags & F_SINGLE_DEVICE)) &&
(currTar_Info->TarStatus & TAR_ALLOW_DISC)) ||
(currTar_Info->TarStatus & TAG_Q_TRYING)) {
*/
if ((currTar_Info->TarStatus & TAR_ALLOW_DISC) ||
(currTar_Info->TarStatus & TAG_Q_TRYING)) {
p_sccb->Sccb_idmsg = (UCHAR)(SMIDENT | DISC_PRIV) | p_sccb->Lun;
}
else {
p_sccb->Sccb_idmsg = (UCHAR)SMIDENT | p_sccb->Lun;
}
p_sccb->HostStatus = 0x00;
p_sccb->TargetStatus = 0x00;
p_sccb->Sccb_tag = 0x00;
p_sccb->Sccb_MGRFlags = 0x00;
p_sccb->Sccb_sgseg = 0x00;
p_sccb->Sccb_ATC = 0x00;
p_sccb->Sccb_savedATC = 0x00;
/*
p_sccb->SccbVirtDataPtr = 0x00;
p_sccb->Sccb_forwardlink = NULL;
p_sccb->Sccb_backlink = NULL;
*/
p_sccb->Sccb_scsistat = BUS_FREE_ST;
p_sccb->SccbStatus = SCCB_IN_PROCESS;
p_sccb->Sccb_scsimsg = SMNO_OP;
}
/*---------------------------------------------------------------------
*
* Function: Phase Decode
*
* Description: Determine the phase and call the appropriate function.
*
*---------------------------------------------------------------------*/
static void FPT_phaseDecode(ULONG p_port, UCHAR p_card)
{
unsigned char phase_ref;
void (*phase) (ULONG, UCHAR);
DISABLE_AUTO(p_port);
phase_ref = (UCHAR) (RD_HARPOON(p_port+hp_scsisig) & S_SCSI_PHZ);
phase = FPT_s_PhaseTbl[phase_ref];
(*phase)(p_port, p_card); /* Call the correct phase func */
}
/*---------------------------------------------------------------------
*
* Function: Data Out Phase
*
* Description: Start up both the BusMaster and Xbow.
*
*---------------------------------------------------------------------*/
static void FPT_phaseDataOut(ULONG port, UCHAR p_card)
{
PSCCB currSCCB;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
if (currSCCB == NULL)
{
return; /* Exit if No SCCB record */
}
currSCCB->Sccb_scsistat = DATA_OUT_ST;
currSCCB->Sccb_XferState &= ~(F_HOST_XFER_DIR | F_NO_DATA_YET);
WR_HARPOON(port+hp_portctrl_0, SCSI_PORT);
WRW_HARPOON((port+hp_intstat), XFER_CNT_0);
WR_HARPOON(port+hp_autostart_0, (END_DATA+END_DATA_START));
FPT_dataXferProcessor(port, &FPT_BL_Card[p_card]);
if (currSCCB->Sccb_XferCnt == 0) {
if ((currSCCB->ControlByte & SCCB_DATA_XFER_OUT) &&
(currSCCB->HostStatus == SCCB_COMPLETE))
currSCCB->HostStatus = SCCB_DATA_OVER_RUN;
FPT_sxfrp(port,p_card);
if (!(RDW_HARPOON((port+hp_intstat)) & (BUS_FREE | RESET)))
FPT_phaseDecode(port,p_card);
}
}
/*---------------------------------------------------------------------
*
* Function: Data In Phase
*
* Description: Startup the BusMaster and the XBOW.
*
*---------------------------------------------------------------------*/
static void FPT_phaseDataIn(ULONG port, UCHAR p_card)
{
PSCCB currSCCB;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
if (currSCCB == NULL)
{
return; /* Exit if No SCCB record */
}
currSCCB->Sccb_scsistat = DATA_IN_ST;
currSCCB->Sccb_XferState |= F_HOST_XFER_DIR;
currSCCB->Sccb_XferState &= ~F_NO_DATA_YET;
WR_HARPOON(port+hp_portctrl_0, SCSI_PORT);
WRW_HARPOON((port+hp_intstat), XFER_CNT_0);
WR_HARPOON(port+hp_autostart_0, (END_DATA+END_DATA_START));
FPT_dataXferProcessor(port, &FPT_BL_Card[p_card]);
if (currSCCB->Sccb_XferCnt == 0) {
if ((currSCCB->ControlByte & SCCB_DATA_XFER_IN) &&
(currSCCB->HostStatus == SCCB_COMPLETE))
currSCCB->HostStatus = SCCB_DATA_OVER_RUN;
FPT_sxfrp(port,p_card);
if (!(RDW_HARPOON((port+hp_intstat)) & (BUS_FREE | RESET)))
FPT_phaseDecode(port,p_card);
}
}
/*---------------------------------------------------------------------
*
* Function: Command Phase
*
* Description: Load the CDB into the automation and start it up.
*
*---------------------------------------------------------------------*/
static void FPT_phaseCommand(ULONG p_port, UCHAR p_card)
{
PSCCB currSCCB;
ULONG cdb_reg;
UCHAR i;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
if (currSCCB->OperationCode == RESET_COMMAND) {
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
currSCCB->CdbLength = SIX_BYTE_CMD;
}
WR_HARPOON(p_port+hp_scsisig, 0x00);
ARAM_ACCESS(p_port);
cdb_reg = p_port + CMD_STRT;
for (i=0; i < currSCCB->CdbLength; i++) {
if (currSCCB->OperationCode == RESET_COMMAND)
WRW_HARPOON(cdb_reg, (MPM_OP + ACOMMAND + 0x00));
else
WRW_HARPOON(cdb_reg, (MPM_OP + ACOMMAND + currSCCB->Cdb[i]));
cdb_reg +=2;
}
if (currSCCB->CdbLength != TWELVE_BYTE_CMD)
WRW_HARPOON(cdb_reg, (BRH_OP+ALWAYS+ NP));
WR_HARPOON(p_port+hp_portctrl_0,(SCSI_PORT));
currSCCB->Sccb_scsistat = COMMAND_ST;
WR_HARPOON(p_port+hp_autostart_3, (AUTO_IMMED | CMD_ONLY_STRT));
SGRAM_ACCESS(p_port);
}
/*---------------------------------------------------------------------
*
* Function: Status phase
*
* Description: Bring in the status and command complete message bytes
*
*---------------------------------------------------------------------*/
static void FPT_phaseStatus(ULONG port, UCHAR p_card)
{
/* Start-up the automation to finish off this command and let the
isr handle the interrupt for command complete when it comes in.
We could wait here for the interrupt to be generated?
*/
WR_HARPOON(port+hp_scsisig, 0x00);
WR_HARPOON(port+hp_autostart_0, (AUTO_IMMED+END_DATA_START));
}
/*---------------------------------------------------------------------
*
* Function: Phase Message Out
*
* Description: Send out our message (if we have one) and handle whatever
* else is involed.
*
*---------------------------------------------------------------------*/
static void FPT_phaseMsgOut(ULONG port, UCHAR p_card)
{
UCHAR message,scsiID;
PSCCB currSCCB;
PSCCBMgr_tar_info currTar_Info;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
if (currSCCB != NULL) {
message = currSCCB->Sccb_scsimsg;
scsiID = currSCCB->TargID;
if (message == SMDEV_RESET)
{
currTar_Info = &FPT_sccbMgrTbl[p_card][scsiID];
currTar_Info->TarSyncCtrl = 0;
FPT_sssyncv(port, scsiID, NARROW_SCSI,currTar_Info);
if (FPT_sccbMgrTbl[p_card][scsiID].TarEEValue & EE_SYNC_MASK)
{
FPT_sccbMgrTbl[p_card][scsiID].TarStatus &= ~TAR_SYNC_MASK;
}
if (FPT_sccbMgrTbl[p_card][scsiID].TarEEValue & EE_WIDE_SCSI)
{
FPT_sccbMgrTbl[p_card][scsiID].TarStatus &= ~TAR_WIDE_MASK;
}
FPT_queueFlushSccb(p_card,SCCB_COMPLETE);
FPT_SccbMgrTableInitTarget(p_card,scsiID);
}
else if (currSCCB->Sccb_scsistat == ABORT_ST)
{
currSCCB->HostStatus = SCCB_COMPLETE;
if(FPT_BL_Card[p_card].discQ_Tbl[currSCCB->Sccb_tag] != NULL)
{
FPT_BL_Card[p_card].discQ_Tbl[currSCCB->Sccb_tag] = NULL;
FPT_sccbMgrTbl[p_card][scsiID].TarTagQ_Cnt--;
}
}
else if (currSCCB->Sccb_scsistat < COMMAND_ST)
{
if(message == SMNO_OP)
{
currSCCB->Sccb_MGRFlags |= F_DEV_SELECTED;
FPT_ssel(port,p_card);
return;
}
}
else
{
if (message == SMABORT)
FPT_queueFlushSccb(p_card,SCCB_COMPLETE);
}
}
else
{
message = SMABORT;
}
WRW_HARPOON((port+hp_intstat), (BUS_FREE | PHASE | XFER_CNT_0));
WR_HARPOON(port+hp_portctrl_0, SCSI_BUS_EN);
WR_HARPOON(port+hp_scsidata_0,message);
WR_HARPOON(port+hp_scsisig, (SCSI_ACK + S_ILL_PH));
ACCEPT_MSG(port);
WR_HARPOON(port+hp_portctrl_0, 0x00);
if ((message == SMABORT) || (message == SMDEV_RESET) ||
(message == SMABORT_TAG) )
{
while(!(RDW_HARPOON((port+hp_intstat)) & (BUS_FREE | PHASE))) {}
if (RDW_HARPOON((port+hp_intstat)) & BUS_FREE)
{
WRW_HARPOON((port+hp_intstat), BUS_FREE);
if (currSCCB != NULL)
{
if((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->Lun] = 0;
else
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 0;
FPT_queueCmdComplete(&FPT_BL_Card[p_card],currSCCB, p_card);
}
else
{
FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
}
}
else
{
FPT_sxfrp(port,p_card);
}
}
else
{
if(message == SMPARITY)
{
currSCCB->Sccb_scsimsg = SMNO_OP;
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
else
{
FPT_sxfrp(port,p_card);
}
}
}
/*---------------------------------------------------------------------
*
* Function: Message In phase
*
* Description: Bring in the message and determine what to do with it.
*
*---------------------------------------------------------------------*/
static void FPT_phaseMsgIn(ULONG port, UCHAR p_card)
{
UCHAR message;
PSCCB currSCCB;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
if (FPT_BL_Card[p_card].globalFlags & F_HOST_XFER_ACT)
{
FPT_phaseChkFifo(port, p_card);
}
message = RD_HARPOON(port+hp_scsidata_0);
if ((message == SMDISC) || (message == SMSAVE_DATA_PTR))
{
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+END_DATA_START));
}
else
{
message = FPT_sfm(port,currSCCB);
if (message)
{
FPT_sdecm(message,port,p_card);
}
else
{
if(currSCCB->Sccb_scsimsg != SMPARITY)
ACCEPT_MSG(port);
WR_HARPOON(port+hp_autostart_1, (AUTO_IMMED+DISCONNECT_START));
}
}
}
/*---------------------------------------------------------------------
*
* Function: Illegal phase
*
* Description: Target switched to some illegal phase, so all we can do
* is report an error back to the host (if that is possible)
* and send an ABORT message to the misbehaving target.
*
*---------------------------------------------------------------------*/
static void FPT_phaseIllegal(ULONG port, UCHAR p_card)
{
PSCCB currSCCB;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
WR_HARPOON(port+hp_scsisig, RD_HARPOON(port+hp_scsisig));
if (currSCCB != NULL) {
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
currSCCB->Sccb_scsistat = ABORT_ST;
currSCCB->Sccb_scsimsg = SMABORT;
}
ACCEPT_MSG_ATN(port);
}
/*---------------------------------------------------------------------
*
* Function: Phase Check FIFO
*
* Description: Make sure data has been flushed from both FIFOs and abort
* the operations if necessary.
*
*---------------------------------------------------------------------*/
static void FPT_phaseChkFifo(ULONG port, UCHAR p_card)
{
ULONG xfercnt;
PSCCB currSCCB;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
if (currSCCB->Sccb_scsistat == DATA_IN_ST)
{
while((!(RD_HARPOON(port+hp_xferstat) & FIFO_EMPTY)) &&
(RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY)) {}
if (!(RD_HARPOON(port+hp_xferstat) & FIFO_EMPTY))
{
currSCCB->Sccb_ATC += currSCCB->Sccb_XferCnt;
currSCCB->Sccb_XferCnt = 0;
if ((RDW_HARPOON((port+hp_intstat)) & PARITY) &&
(currSCCB->HostStatus == SCCB_COMPLETE))
{
currSCCB->HostStatus = SCCB_PARITY_ERR;
WRW_HARPOON((port+hp_intstat), PARITY);
}
FPT_hostDataXferAbort(port,p_card,currSCCB);
FPT_dataXferProcessor(port, &FPT_BL_Card[p_card]);
while((!(RD_HARPOON(port+hp_xferstat) & FIFO_EMPTY)) &&
(RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY)) {}
}
} /*End Data In specific code. */
GET_XFER_CNT(port,xfercnt);
WR_HARPOON(port+hp_xfercnt_0, 0x00);
WR_HARPOON(port+hp_portctrl_0, 0x00);
currSCCB->Sccb_ATC += (currSCCB->Sccb_XferCnt - xfercnt);
currSCCB->Sccb_XferCnt = xfercnt;
if ((RDW_HARPOON((port+hp_intstat)) & PARITY) &&
(currSCCB->HostStatus == SCCB_COMPLETE)) {
currSCCB->HostStatus = SCCB_PARITY_ERR;
WRW_HARPOON((port+hp_intstat), PARITY);
}
FPT_hostDataXferAbort(port,p_card,currSCCB);
WR_HARPOON(port+hp_fifowrite, 0x00);
WR_HARPOON(port+hp_fiforead, 0x00);
WR_HARPOON(port+hp_xferstat, 0x00);
WRW_HARPOON((port+hp_intstat), XFER_CNT_0);
}
/*---------------------------------------------------------------------
*
* Function: Phase Bus Free
*
* Description: We just went bus free so figure out if it was
* because of command complete or from a disconnect.
*
*---------------------------------------------------------------------*/
static void FPT_phaseBusFree(ULONG port, UCHAR p_card)
{
PSCCB currSCCB;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
if (currSCCB != NULL)
{
DISABLE_AUTO(port);
if (currSCCB->OperationCode == RESET_COMMAND)
{
if((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->Lun] = 0;
else
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 0;
FPT_queueCmdComplete(&FPT_BL_Card[p_card], currSCCB, p_card);
FPT_queueSearchSelect(&FPT_BL_Card[p_card],p_card);
}
else if(currSCCB->Sccb_scsistat == SELECT_SN_ST)
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus |=
(UCHAR)SYNC_SUPPORTED;
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &= ~EE_SYNC_MASK;
}
else if(currSCCB->Sccb_scsistat == SELECT_WN_ST)
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus =
(FPT_sccbMgrTbl[p_card][currSCCB->TargID].
TarStatus & ~WIDE_ENABLED) | WIDE_NEGOCIATED;
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &= ~EE_WIDE_SCSI;
}
else if(currSCCB->Sccb_scsistat == SELECT_Q_ST)
{
/* Make sure this is not a phony BUS_FREE. If we were
reselected or if BUSY is NOT on then this is a
valid BUS FREE. SRR Wednesday, 5/10/1995. */
if ((!(RD_HARPOON(port+hp_scsisig) & SCSI_BSY)) ||
(RDW_HARPOON((port+hp_intstat)) & RSEL))
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus &= ~TAR_TAG_Q_MASK;
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus |= TAG_Q_REJECT;
}
else
{
return;
}
}
else
{
currSCCB->Sccb_scsistat = BUS_FREE_ST;
if (!currSCCB->HostStatus)
{
currSCCB->HostStatus = SCCB_PHASE_SEQUENCE_FAIL;
}
if((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->Lun] = 0;
else
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 0;
FPT_queueCmdComplete(&FPT_BL_Card[p_card], currSCCB, p_card);
return;
}
FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
} /*end if !=null */
}
/*---------------------------------------------------------------------
*
* Function: Auto Load Default Map
*
* Description: Load the Automation RAM with the defualt map values.
*
*---------------------------------------------------------------------*/
static void FPT_autoLoadDefaultMap(ULONG p_port)
{
ULONG map_addr;
ARAM_ACCESS(p_port);
map_addr = p_port + hp_aramBase;
WRW_HARPOON(map_addr, (MPM_OP+AMSG_OUT+ 0xC0)); /*ID MESSAGE */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+AMSG_OUT+ 0x20)); /*SIMPLE TAG QUEUEING MSG */
map_addr +=2;
WRW_HARPOON(map_addr, RAT_OP); /*RESET ATTENTION */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+AMSG_OUT+ 0x00)); /*TAG ID MSG */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 0 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 1 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 2 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 3 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 4 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 5 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 6 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 7 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 8 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 9 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 10 */
map_addr +=2;
WRW_HARPOON(map_addr, (MPM_OP+ACOMMAND+ 0x00)); /*CDB BYTE 11 */
map_addr +=2;
WRW_HARPOON(map_addr, (CPE_OP+ADATA_OUT+ DINT)); /*JUMP IF DATA OUT */
map_addr +=2;
WRW_HARPOON(map_addr, (TCB_OP+FIFO_0+ DI)); /*JUMP IF NO DATA IN FIFO */
map_addr +=2; /*This means AYNC DATA IN */
WRW_HARPOON(map_addr, (SSI_OP+ SSI_IDO_STRT)); /*STOP AND INTERRUPT */
map_addr +=2;
WRW_HARPOON(map_addr, (CPE_OP+ADATA_IN+DINT)); /*JUMP IF NOT DATA IN PHZ */
map_addr +=2;
WRW_HARPOON(map_addr, (CPN_OP+AMSG_IN+ ST)); /*IF NOT MSG IN CHECK 4 DATA IN */
map_addr +=2;
WRW_HARPOON(map_addr, (CRD_OP+SDATA+ 0x02)); /*SAVE DATA PTR MSG? */
map_addr +=2;
WRW_HARPOON(map_addr, (BRH_OP+NOT_EQ+ DC)); /*GO CHECK FOR DISCONNECT MSG */
map_addr +=2;
WRW_HARPOON(map_addr, (MRR_OP+SDATA+ D_AR1)); /*SAVE DATA PTRS MSG */
map_addr +=2;
WRW_HARPOON(map_addr, (CPN_OP+AMSG_IN+ ST)); /*IF NOT MSG IN CHECK DATA IN */
map_addr +=2;
WRW_HARPOON(map_addr, (CRD_OP+SDATA+ 0x04)); /*DISCONNECT MSG? */
map_addr +=2;
WRW_HARPOON(map_addr, (BRH_OP+NOT_EQ+ UNKNWN));/*UKNKNOWN MSG */
map_addr +=2;
WRW_HARPOON(map_addr, (MRR_OP+SDATA+ D_BUCKET));/*XFER DISCONNECT MSG */
map_addr +=2;
WRW_HARPOON(map_addr, (SSI_OP+ SSI_ITAR_DISC));/*STOP AND INTERRUPT */
map_addr +=2;
WRW_HARPOON(map_addr, (CPN_OP+ASTATUS+ UNKNWN));/*JUMP IF NOT STATUS PHZ. */
map_addr +=2;
WRW_HARPOON(map_addr, (MRR_OP+SDATA+ D_AR0)); /*GET STATUS BYTE */
map_addr +=2;
WRW_HARPOON(map_addr, (CPN_OP+AMSG_IN+ CC)); /*ERROR IF NOT MSG IN PHZ */
map_addr +=2;
WRW_HARPOON(map_addr, (CRD_OP+SDATA+ 0x00)); /*CHECK FOR CMD COMPLETE MSG. */
map_addr +=2;
WRW_HARPOON(map_addr, (BRH_OP+NOT_EQ+ CC)); /*ERROR IF NOT CMD COMPLETE MSG. */
map_addr +=2;
WRW_HARPOON(map_addr, (MRR_OP+SDATA+ D_BUCKET));/*GET CMD COMPLETE MSG */
map_addr +=2;
WRW_HARPOON(map_addr, (SSI_OP+ SSI_ICMD_COMP));/*END OF COMMAND */
map_addr +=2;
WRW_HARPOON(map_addr, (SSI_OP+ SSI_IUNKWN)); /*RECEIVED UNKNOWN MSG BYTE */
map_addr +=2;
WRW_HARPOON(map_addr, (SSI_OP+ SSI_INO_CC)); /*NO COMMAND COMPLETE AFTER STATUS */
map_addr +=2;
WRW_HARPOON(map_addr, (SSI_OP+ SSI_ITICKLE)); /*BIOS Tickled the Mgr */
map_addr +=2;
WRW_HARPOON(map_addr, (SSI_OP+ SSI_IRFAIL)); /*EXPECTED ID/TAG MESSAGES AND */
map_addr +=2; /* DIDN'T GET ONE */
WRW_HARPOON(map_addr, (CRR_OP+AR3+ S_IDREG)); /* comp SCSI SEL ID & AR3*/
map_addr +=2;
WRW_HARPOON(map_addr, (BRH_OP+EQUAL+ 0x00)); /*SEL ID OK then Conti. */
map_addr +=2;
WRW_HARPOON(map_addr, (SSI_OP+ SSI_INO_CC)); /*NO COMMAND COMPLETE AFTER STATUS */
SGRAM_ACCESS(p_port);
}
/*---------------------------------------------------------------------
*
* Function: Auto Command Complete
*
* Description: Post command back to host and find another command
* to execute.
*
*---------------------------------------------------------------------*/
static void FPT_autoCmdCmplt(ULONG p_port, UCHAR p_card)
{
PSCCB currSCCB;
UCHAR status_byte;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
status_byte = RD_HARPOON(p_port+hp_gp_reg_0);
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUN_CA = 0;
if (status_byte != SSGOOD) {
if (status_byte == SSQ_FULL) {
if(((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->Lun] = 1;
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[FPT_sccbMgrTbl[p_card][currSCCB->TargID].LunDiscQ_Idx[currSCCB->Lun]] = NULL;
}
else
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 1;
if(currSCCB->Sccb_tag)
{
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[currSCCB->Sccb_tag] = NULL;
}else
{
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[FPT_sccbMgrTbl[p_card][currSCCB->TargID].LunDiscQ_Idx[0]] = NULL;
}
}
currSCCB->Sccb_MGRFlags |= F_STATUSLOADED;
FPT_queueSelectFail(&FPT_BL_Card[p_card],p_card);
return;
}
if(currSCCB->Sccb_scsistat == SELECT_SN_ST)
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus |=
(UCHAR)SYNC_SUPPORTED;
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &= ~EE_SYNC_MASK;
FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
if(((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->Lun] = 1;
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[FPT_sccbMgrTbl[p_card][currSCCB->TargID].LunDiscQ_Idx[currSCCB->Lun]] = NULL;
}
else
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 1;
if(currSCCB->Sccb_tag)
{
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[currSCCB->Sccb_tag] = NULL;
}else
{
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[FPT_sccbMgrTbl[p_card][currSCCB->TargID].LunDiscQ_Idx[0]] = NULL;
}
}
return;
}
if(currSCCB->Sccb_scsistat == SELECT_WN_ST)
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus =
(FPT_sccbMgrTbl[p_card][currSCCB->TargID].
TarStatus & ~WIDE_ENABLED) | WIDE_NEGOCIATED;
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue &= ~EE_WIDE_SCSI;
FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
if(((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->Lun] = 1;
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[FPT_sccbMgrTbl[p_card][currSCCB->TargID].LunDiscQ_Idx[currSCCB->Lun]] = NULL;
}
else
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 1;
if(currSCCB->Sccb_tag)
{
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[currSCCB->Sccb_tag] = NULL;
}else
{
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[FPT_sccbMgrTbl[p_card][currSCCB->TargID].LunDiscQ_Idx[0]] = NULL;
}
}
return;
}
if (status_byte == SSCHECK)
{
if(FPT_BL_Card[p_card].globalFlags & F_DO_RENEGO)
{
if (FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue & EE_SYNC_MASK)
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus &= ~TAR_SYNC_MASK;
}
if (FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarEEValue & EE_WIDE_SCSI)
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus &= ~TAR_WIDE_MASK;
}
}
}
if (!(currSCCB->Sccb_XferState & F_AUTO_SENSE)) {
currSCCB->SccbStatus = SCCB_ERROR;
currSCCB->TargetStatus = status_byte;
if (status_byte == SSCHECK) {
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUN_CA
= 1;
if (currSCCB->RequestSenseLength != NO_AUTO_REQUEST_SENSE) {
if (currSCCB->RequestSenseLength == 0)
currSCCB->RequestSenseLength = 14;
FPT_ssenss(&FPT_BL_Card[p_card]);
FPT_BL_Card[p_card].globalFlags |= F_NEW_SCCB_CMD;
if(((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->Lun] = 1;
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[FPT_sccbMgrTbl[p_card][currSCCB->TargID].LunDiscQ_Idx[currSCCB->Lun]] = NULL;
}
else
{
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 1;
if(currSCCB->Sccb_tag)
{
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[currSCCB->Sccb_tag] = NULL;
}else
{
if(FPT_BL_Card[p_card].discQCount != 0)
FPT_BL_Card[p_card].discQCount--;
FPT_BL_Card[p_card].discQ_Tbl[FPT_sccbMgrTbl[p_card][currSCCB->TargID].LunDiscQ_Idx[0]] = NULL;
}
}
return;
}
}
}
}
if((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[currSCCB->Lun] = 0;
else
FPT_sccbMgrTbl[p_card][currSCCB->TargID].TarLUNBusy[0] = 0;
FPT_queueCmdComplete(&FPT_BL_Card[p_card], currSCCB, p_card);
}
#define SHORT_WAIT 0x0000000F
#define LONG_WAIT 0x0000FFFFL
/*---------------------------------------------------------------------
*
* Function: Data Transfer Processor
*
* Description: This routine performs two tasks.
* (1) Start data transfer by calling HOST_DATA_XFER_START
* function. Once data transfer is started, (2) Depends
* on the type of data transfer mode Scatter/Gather mode
* or NON Scatter/Gather mode. In NON Scatter/Gather mode,
* this routine checks Sccb_MGRFlag (F_HOST_XFER_ACT bit) for
* data transfer done. In Scatter/Gather mode, this routine
* checks bus master command complete and dual rank busy
* bit to keep chaining SC transfer command. Similarly,
* in Scatter/Gather mode, it checks Sccb_MGRFlag
* (F_HOST_XFER_ACT bit) for data transfer done.
*
*---------------------------------------------------------------------*/
static void FPT_dataXferProcessor(ULONG port, PSCCBcard pCurrCard)
{
PSCCB currSCCB;
currSCCB = pCurrCard->currentSCCB;
if (currSCCB->Sccb_XferState & F_SG_XFER)
{
if (pCurrCard->globalFlags & F_HOST_XFER_ACT)
{
currSCCB->Sccb_sgseg += (UCHAR)SG_BUF_CNT;
currSCCB->Sccb_SGoffset = 0x00;
}
pCurrCard->globalFlags |= F_HOST_XFER_ACT;
FPT_busMstrSGDataXferStart(port, currSCCB);
}
else
{
if (!(pCurrCard->globalFlags & F_HOST_XFER_ACT))
{
pCurrCard->globalFlags |= F_HOST_XFER_ACT;
FPT_busMstrDataXferStart(port, currSCCB);
}
}
}
/*---------------------------------------------------------------------
*
* Function: BusMaster Scatter Gather Data Transfer Start
*
* Description:
*
*---------------------------------------------------------------------*/
static void FPT_busMstrSGDataXferStart(ULONG p_port, PSCCB pcurrSCCB)
{
ULONG count,addr,tmpSGCnt;
UINT sg_index;
UCHAR sg_count, i;
ULONG reg_offset;
if (pcurrSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
count = ((ULONG) HOST_RD_CMD)<<24;
}
else {
count = ((ULONG) HOST_WRT_CMD)<<24;
}
sg_count = 0;
tmpSGCnt = 0;
sg_index = pcurrSCCB->Sccb_sgseg;
reg_offset = hp_aramBase;
i = (UCHAR) (RD_HARPOON(p_port+hp_page_ctrl) & ~(SGRAM_ARAM|SCATTER_EN));
WR_HARPOON(p_port+hp_page_ctrl, i);
while ((sg_count < (UCHAR)SG_BUF_CNT) &&
((ULONG)(sg_index * (UINT)SG_ELEMENT_SIZE) < pcurrSCCB->DataLength) ) {
tmpSGCnt += *(((ULONG *)pcurrSCCB->DataPointer)+
(sg_index * 2));
count |= *(((ULONG *)pcurrSCCB->DataPointer)+
(sg_index * 2));
addr = *(((ULONG *)pcurrSCCB->DataPointer)+
((sg_index * 2) + 1));
if ((!sg_count) && (pcurrSCCB->Sccb_SGoffset)) {
addr += ((count & 0x00FFFFFFL) - pcurrSCCB->Sccb_SGoffset);
count = (count & 0xFF000000L) | pcurrSCCB->Sccb_SGoffset;
tmpSGCnt = count & 0x00FFFFFFL;
}
WR_HARP32(p_port,reg_offset,addr);
reg_offset +=4;
WR_HARP32(p_port,reg_offset,count);
reg_offset +=4;
count &= 0xFF000000L;
sg_index++;
sg_count++;
} /*End While */
pcurrSCCB->Sccb_XferCnt = tmpSGCnt;
WR_HARPOON(p_port+hp_sg_addr,(sg_count<<4));
if (pcurrSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
WR_HARP32(p_port,hp_xfercnt_0,tmpSGCnt);
WR_HARPOON(p_port+hp_portctrl_0,(DMA_PORT | SCSI_PORT | SCSI_INBIT));
WR_HARPOON(p_port+hp_scsisig, S_DATAI_PH);
}
else {
if ((!(RD_HARPOON(p_port+hp_synctarg_0) & NARROW_SCSI)) &&
(tmpSGCnt & 0x000000001))
{
pcurrSCCB->Sccb_XferState |= F_ODD_BALL_CNT;
tmpSGCnt--;
}
WR_HARP32(p_port,hp_xfercnt_0,tmpSGCnt);
WR_HARPOON(p_port+hp_portctrl_0,(SCSI_PORT | DMA_PORT | DMA_RD));
WR_HARPOON(p_port+hp_scsisig, S_DATAO_PH);
}
WR_HARPOON(p_port+hp_page_ctrl, (UCHAR) (i | SCATTER_EN));
}
/*---------------------------------------------------------------------
*
* Function: BusMaster Data Transfer Start
*
* Description:
*
*---------------------------------------------------------------------*/
static void FPT_busMstrDataXferStart(ULONG p_port, PSCCB pcurrSCCB)
{
ULONG addr,count;
if (!(pcurrSCCB->Sccb_XferState & F_AUTO_SENSE)) {
count = pcurrSCCB->Sccb_XferCnt;
addr = (ULONG) pcurrSCCB->DataPointer + pcurrSCCB->Sccb_ATC;
}
else {
addr = pcurrSCCB->SensePointer;
count = pcurrSCCB->RequestSenseLength;
}
HP_SETUP_ADDR_CNT(p_port,addr,count);
if (pcurrSCCB->Sccb_XferState & F_HOST_XFER_DIR) {
WR_HARPOON(p_port+hp_portctrl_0,(DMA_PORT | SCSI_PORT | SCSI_INBIT));
WR_HARPOON(p_port+hp_scsisig, S_DATAI_PH);
WR_HARPOON(p_port+hp_xfer_cmd,
(XFER_DMA_HOST | XFER_HOST_AUTO | XFER_DMA_8BIT));
}
else {
WR_HARPOON(p_port+hp_portctrl_0,(SCSI_PORT | DMA_PORT | DMA_RD));
WR_HARPOON(p_port+hp_scsisig, S_DATAO_PH);
WR_HARPOON(p_port+hp_xfer_cmd,
(XFER_HOST_DMA | XFER_HOST_AUTO | XFER_DMA_8BIT));
}
}
/*---------------------------------------------------------------------
*
* Function: BusMaster Timeout Handler
*
* Description: This function is called after a bus master command busy time
* out is detected. This routines issue halt state machine
* with a software time out for command busy. If command busy
* is still asserted at the end of the time out, it issues
* hard abort with another software time out. It hard abort
* command busy is also time out, it'll just give up.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_busMstrTimeOut(ULONG p_port)
{
ULONG timeout;
timeout = LONG_WAIT;
WR_HARPOON(p_port+hp_sys_ctrl, HALT_MACH);
while ((!(RD_HARPOON(p_port+hp_ext_status) & CMD_ABORTED)) && timeout--) {}
if (RD_HARPOON(p_port+hp_ext_status) & BM_CMD_BUSY) {
WR_HARPOON(p_port+hp_sys_ctrl, HARD_ABORT);
timeout = LONG_WAIT;
while ((RD_HARPOON(p_port+hp_ext_status) & BM_CMD_BUSY) && timeout--) {}
}
RD_HARPOON(p_port+hp_int_status); /*Clear command complete */
if (RD_HARPOON(p_port+hp_ext_status) & BM_CMD_BUSY) {
return(1);
}
else {
return(0);
}
}
/*---------------------------------------------------------------------
*
* Function: Host Data Transfer Abort
*
* Description: Abort any in progress transfer.
*
*---------------------------------------------------------------------*/
static void FPT_hostDataXferAbort(ULONG port, UCHAR p_card, PSCCB pCurrSCCB)
{
ULONG timeout;
ULONG remain_cnt;
UINT sg_ptr;
FPT_BL_Card[p_card].globalFlags &= ~F_HOST_XFER_ACT;
if (pCurrSCCB->Sccb_XferState & F_AUTO_SENSE) {
if (!(RD_HARPOON(port+hp_int_status) & INT_CMD_COMPL)) {
WR_HARPOON(port+hp_bm_ctrl, (RD_HARPOON(port+hp_bm_ctrl) | FLUSH_XFER_CNTR));
timeout = LONG_WAIT;
while ((RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) && timeout--) {}
WR_HARPOON(port+hp_bm_ctrl, (RD_HARPOON(port+hp_bm_ctrl) & ~FLUSH_XFER_CNTR));
if (RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) {
if (FPT_busMstrTimeOut(port)) {
if (pCurrSCCB->HostStatus == 0x00)
pCurrSCCB->HostStatus = SCCB_BM_ERR;
}
if (RD_HARPOON(port+hp_int_status) & INT_EXT_STATUS)
if (RD_HARPOON(port+hp_ext_status) & BAD_EXT_STATUS)
if (pCurrSCCB->HostStatus == 0x00)
{
pCurrSCCB->HostStatus = SCCB_BM_ERR;
}
}
}
}
else if (pCurrSCCB->Sccb_XferCnt) {
if (pCurrSCCB->Sccb_XferState & F_SG_XFER) {
WR_HARPOON(port+hp_page_ctrl, (RD_HARPOON(port+hp_page_ctrl) &
~SCATTER_EN));
WR_HARPOON(port+hp_sg_addr,0x00);
sg_ptr = pCurrSCCB->Sccb_sgseg + SG_BUF_CNT;
if (sg_ptr > (UINT)(pCurrSCCB->DataLength / SG_ELEMENT_SIZE)) {
sg_ptr = (UINT)(pCurrSCCB->DataLength / SG_ELEMENT_SIZE);
}
remain_cnt = pCurrSCCB->Sccb_XferCnt;
while (remain_cnt < 0x01000000L) {
sg_ptr--;
if (remain_cnt > (ULONG)(*(((ULONG *)pCurrSCCB->
DataPointer) + (sg_ptr * 2)))) {
remain_cnt -= (ULONG)(*(((ULONG *)pCurrSCCB->
DataPointer) + (sg_ptr * 2)));
}
else {
break;
}
}
if (remain_cnt < 0x01000000L) {
pCurrSCCB->Sccb_SGoffset = remain_cnt;
pCurrSCCB->Sccb_sgseg = (USHORT)sg_ptr;
if ((ULONG)(sg_ptr * SG_ELEMENT_SIZE) == pCurrSCCB->DataLength
&& (remain_cnt == 0))
pCurrSCCB->Sccb_XferState |= F_ALL_XFERRED;
}
else {
if (pCurrSCCB->HostStatus == 0x00) {
pCurrSCCB->HostStatus = SCCB_GROSS_FW_ERR;
}
}
}
if (!(pCurrSCCB->Sccb_XferState & F_HOST_XFER_DIR)) {
if (RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) {
FPT_busMstrTimeOut(port);
}
else {
if (RD_HARPOON(port+hp_int_status) & INT_EXT_STATUS) {
if (RD_HARPOON(port+hp_ext_status) & BAD_EXT_STATUS) {
if (pCurrSCCB->HostStatus == 0x00) {
pCurrSCCB->HostStatus = SCCB_BM_ERR;
}
}
}
}
}
else {
if ((RD_HARPOON(port+hp_fifo_cnt)) >= BM_THRESHOLD) {
timeout = SHORT_WAIT;
while ((RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) &&
((RD_HARPOON(port+hp_fifo_cnt)) >= BM_THRESHOLD) &&
timeout--) {}
}
if (RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) {
WR_HARPOON(port+hp_bm_ctrl, (RD_HARPOON(port+hp_bm_ctrl) |
FLUSH_XFER_CNTR));
timeout = LONG_WAIT;
while ((RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) &&
timeout--) {}
WR_HARPOON(port+hp_bm_ctrl, (RD_HARPOON(port+hp_bm_ctrl) &
~FLUSH_XFER_CNTR));
if (RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) {
if (pCurrSCCB->HostStatus == 0x00) {
pCurrSCCB->HostStatus = SCCB_BM_ERR;
}
FPT_busMstrTimeOut(port);
}
}
if (RD_HARPOON(port+hp_int_status) & INT_EXT_STATUS) {
if (RD_HARPOON(port+hp_ext_status) & BAD_EXT_STATUS) {
if (pCurrSCCB->HostStatus == 0x00) {
pCurrSCCB->HostStatus = SCCB_BM_ERR;
}
}
}
}
}
else {
if (RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) {
timeout = LONG_WAIT;
while ((RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) && timeout--) {}
if (RD_HARPOON(port+hp_ext_status) & BM_CMD_BUSY) {
if (pCurrSCCB->HostStatus == 0x00) {
pCurrSCCB->HostStatus = SCCB_BM_ERR;
}
FPT_busMstrTimeOut(port);
}
}
if (RD_HARPOON(port+hp_int_status) & INT_EXT_STATUS) {
if (RD_HARPOON(port+hp_ext_status) & BAD_EXT_STATUS) {
if (pCurrSCCB->HostStatus == 0x00) {
pCurrSCCB->HostStatus = SCCB_BM_ERR;
}
}
}
if (pCurrSCCB->Sccb_XferState & F_SG_XFER) {
WR_HARPOON(port+hp_page_ctrl, (RD_HARPOON(port+hp_page_ctrl) &
~SCATTER_EN));
WR_HARPOON(port+hp_sg_addr,0x00);
pCurrSCCB->Sccb_sgseg += SG_BUF_CNT;
pCurrSCCB->Sccb_SGoffset = 0x00;
if ((ULONG)(pCurrSCCB->Sccb_sgseg * SG_ELEMENT_SIZE) >=
pCurrSCCB->DataLength) {
pCurrSCCB->Sccb_XferState |= F_ALL_XFERRED;
pCurrSCCB->Sccb_sgseg = (USHORT)(pCurrSCCB->DataLength / SG_ELEMENT_SIZE);
}
}
else {
if (!(pCurrSCCB->Sccb_XferState & F_AUTO_SENSE))
pCurrSCCB->Sccb_XferState |= F_ALL_XFERRED;
}
}
WR_HARPOON(port+hp_int_mask,(INT_CMD_COMPL | SCSI_INTERRUPT));
}
/*---------------------------------------------------------------------
*
* Function: Host Data Transfer Restart
*
* Description: Reset the available count due to a restore data
* pointers message.
*
*---------------------------------------------------------------------*/
static void FPT_hostDataXferRestart(PSCCB currSCCB)
{
ULONG data_count;
UINT sg_index;
ULONG *sg_ptr;
if (currSCCB->Sccb_XferState & F_SG_XFER) {
currSCCB->Sccb_XferCnt = 0;
sg_index = 0xffff; /*Index by long words into sg list. */
data_count = 0; /*Running count of SG xfer counts. */
sg_ptr = (ULONG *)currSCCB->DataPointer;
while (data_count < currSCCB->Sccb_ATC) {
sg_index++;
data_count += *(sg_ptr+(sg_index * 2));
}
if (data_count == currSCCB->Sccb_ATC) {
currSCCB->Sccb_SGoffset = 0;
sg_index++;
}
else {
currSCCB->Sccb_SGoffset = data_count - currSCCB->Sccb_ATC;
}
currSCCB->Sccb_sgseg = (USHORT)sg_index;
}
else {
currSCCB->Sccb_XferCnt = currSCCB->DataLength - currSCCB->Sccb_ATC;
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_scini
*
* Description: Setup all data structures necessary for SCAM selection.
*
*---------------------------------------------------------------------*/
static void FPT_scini(UCHAR p_card, UCHAR p_our_id, UCHAR p_power_up)
{
UCHAR loser,assigned_id;
ULONG p_port;
UCHAR i,k,ScamFlg ;
PSCCBcard currCard;
PNVRamInfo pCurrNvRam;
currCard = &FPT_BL_Card[p_card];
p_port = currCard->ioPort;
pCurrNvRam = currCard->pNvRamInfo;
if(pCurrNvRam){
ScamFlg = pCurrNvRam->niScamConf;
i = pCurrNvRam->niSysConf;
}
else{
ScamFlg = (UCHAR) FPT_utilEERead(p_port, SCAM_CONFIG/2);
i = (UCHAR)(FPT_utilEERead(p_port, (SYSTEM_CONFIG/2)));
}
if(!(i & 0x02)) /* check if reset bus in AutoSCSI parameter set */
return;
FPT_inisci(p_card,p_port, p_our_id);
/* Force to wait 1 sec after SCSI bus reset. Some SCAM device FW
too slow to return to SCAM selection */
/* if (p_power_up)
FPT_Wait1Second(p_port);
else
FPT_Wait(p_port, TO_250ms); */
FPT_Wait1Second(p_port);
if ((ScamFlg & SCAM_ENABLED) && (ScamFlg & SCAM_LEVEL2))
{
while (!(FPT_scarb(p_port,INIT_SELTD))) {}
FPT_scsel(p_port);
do {
FPT_scxferc(p_port,SYNC_PTRN);
FPT_scxferc(p_port,DOM_MSTR);
loser = FPT_scsendi(p_port,&FPT_scamInfo[p_our_id].id_string[0]);
} while ( loser == 0xFF );
FPT_scbusf(p_port);
if ((p_power_up) && (!loser))
{
FPT_sresb(p_port,p_card);
FPT_Wait(p_port, TO_250ms);
while (!(FPT_scarb(p_port,INIT_SELTD))) {}
FPT_scsel(p_port);
do {
FPT_scxferc(p_port, SYNC_PTRN);
FPT_scxferc(p_port, DOM_MSTR);
loser = FPT_scsendi(p_port,&FPT_scamInfo[p_our_id].
id_string[0]);
} while ( loser == 0xFF );
FPT_scbusf(p_port);
}
}
else
{
loser = 0;
}
if (!loser)
{
FPT_scamInfo[p_our_id].state = ID_ASSIGNED;
if (ScamFlg & SCAM_ENABLED)
{
for (i=0; i < MAX_SCSI_TAR; i++)
{
if ((FPT_scamInfo[i].state == ID_UNASSIGNED) ||
(FPT_scamInfo[i].state == ID_UNUSED))
{
if (FPT_scsell(p_port,i))
{
FPT_scamInfo[i].state = LEGACY;
if ((FPT_scamInfo[i].id_string[0] != 0xFF) ||
(FPT_scamInfo[i].id_string[1] != 0xFA))
{
FPT_scamInfo[i].id_string[0] = 0xFF;
FPT_scamInfo[i].id_string[1] = 0xFA;
if(pCurrNvRam == NULL)
currCard->globalFlags |= F_UPDATE_EEPROM;
}
}
}
}
FPT_sresb(p_port,p_card);
FPT_Wait1Second(p_port);
while (!(FPT_scarb(p_port,INIT_SELTD))) {}
FPT_scsel(p_port);
FPT_scasid(p_card, p_port);
}
}
else if ((loser) && (ScamFlg & SCAM_ENABLED))
{
FPT_scamInfo[p_our_id].id_string[0] = SLV_TYPE_CODE0;
assigned_id = 0;
FPT_scwtsel(p_port);
do {
while (FPT_scxferc(p_port,0x00) != SYNC_PTRN) {}
i = FPT_scxferc(p_port,0x00);
if (i == ASSIGN_ID)
{
if (!(FPT_scsendi(p_port,&FPT_scamInfo[p_our_id].id_string[0])))
{
i = FPT_scxferc(p_port,0x00);
if (FPT_scvalq(i))
{
k = FPT_scxferc(p_port,0x00);
if (FPT_scvalq(k))
{
currCard->ourId =
((UCHAR)(i<<3)+(k & (UCHAR)7)) & (UCHAR) 0x3F;
FPT_inisci(p_card, p_port, p_our_id);
FPT_scamInfo[currCard->ourId].state = ID_ASSIGNED;
FPT_scamInfo[currCard->ourId].id_string[0]
= SLV_TYPE_CODE0;
assigned_id = 1;
}
}
}
}
else if (i == SET_P_FLAG)
{
if (!(FPT_scsendi(p_port,
&FPT_scamInfo[p_our_id].id_string[0])))
FPT_scamInfo[p_our_id].id_string[0] |= 0x80;
}
}while (!assigned_id);
while (FPT_scxferc(p_port,0x00) != CFG_CMPLT) {}
}
if (ScamFlg & SCAM_ENABLED)
{
FPT_scbusf(p_port);
if (currCard->globalFlags & F_UPDATE_EEPROM)
{
FPT_scsavdi(p_card, p_port);
currCard->globalFlags &= ~F_UPDATE_EEPROM;
}
}
/*
for (i=0,k=0; i < MAX_SCSI_TAR; i++)
{
if ((FPT_scamInfo[i].state == ID_ASSIGNED) ||
(FPT_scamInfo[i].state == LEGACY))
k++;
}
if (k==2)
currCard->globalFlags |= F_SINGLE_DEVICE;
else
currCard->globalFlags &= ~F_SINGLE_DEVICE;
*/
}
/*---------------------------------------------------------------------
*
* Function: FPT_scarb
*
* Description: Gain control of the bus and wait SCAM select time (250ms)
*
*---------------------------------------------------------------------*/
static int FPT_scarb(ULONG p_port, UCHAR p_sel_type)
{
if (p_sel_type == INIT_SELTD)
{
while (RD_HARPOON(p_port+hp_scsisig) & (SCSI_SEL | SCSI_BSY)) {}
if (RD_HARPOON(p_port+hp_scsisig) & SCSI_SEL)
return(0);
if (RD_HARPOON(p_port+hp_scsidata_0) != 00)
return(0);
WR_HARPOON(p_port+hp_scsisig, (RD_HARPOON(p_port+hp_scsisig) | SCSI_BSY));
if (RD_HARPOON(p_port+hp_scsisig) & SCSI_SEL) {
WR_HARPOON(p_port+hp_scsisig, (RD_HARPOON(p_port+hp_scsisig) &
~SCSI_BSY));
return(0);
}
WR_HARPOON(p_port+hp_scsisig, (RD_HARPOON(p_port+hp_scsisig) | SCSI_SEL));
if (RD_HARPOON(p_port+hp_scsidata_0) != 00) {
WR_HARPOON(p_port+hp_scsisig, (RD_HARPOON(p_port+hp_scsisig) &
~(SCSI_BSY | SCSI_SEL)));
return(0);
}
}
WR_HARPOON(p_port+hp_clkctrl_0, (RD_HARPOON(p_port+hp_clkctrl_0)
& ~ACTdeassert));
WR_HARPOON(p_port+hp_scsireset, SCAM_EN);
WR_HARPOON(p_port+hp_scsidata_0, 0x00);
WR_HARPOON(p_port+hp_scsidata_1, 0x00);
WR_HARPOON(p_port+hp_portctrl_0, SCSI_BUS_EN);
WR_HARPOON(p_port+hp_scsisig, (RD_HARPOON(p_port+hp_scsisig) | SCSI_MSG));
WR_HARPOON(p_port+hp_scsisig, (RD_HARPOON(p_port+hp_scsisig)
& ~SCSI_BSY));
FPT_Wait(p_port,TO_250ms);
return(1);
}
/*---------------------------------------------------------------------
*
* Function: FPT_scbusf
*
* Description: Release the SCSI bus and disable SCAM selection.
*
*---------------------------------------------------------------------*/
static void FPT_scbusf(ULONG p_port)
{
WR_HARPOON(p_port+hp_page_ctrl,
(RD_HARPOON(p_port+hp_page_ctrl) | G_INT_DISABLE));
WR_HARPOON(p_port+hp_scsidata_0, 0x00);
WR_HARPOON(p_port+hp_portctrl_0, (RD_HARPOON(p_port+hp_portctrl_0)
& ~SCSI_BUS_EN));
WR_HARPOON(p_port+hp_scsisig, 0x00);
WR_HARPOON(p_port+hp_scsireset, (RD_HARPOON(p_port+hp_scsireset)
& ~SCAM_EN));
WR_HARPOON(p_port+hp_clkctrl_0, (RD_HARPOON(p_port+hp_clkctrl_0)
| ACTdeassert));
WRW_HARPOON((p_port+hp_intstat), (BUS_FREE | AUTO_INT | SCAM_SEL));
WR_HARPOON(p_port+hp_page_ctrl,
(RD_HARPOON(p_port+hp_page_ctrl) & ~G_INT_DISABLE));
}
/*---------------------------------------------------------------------
*
* Function: FPT_scasid
*
* Description: Assign an ID to all the SCAM devices.
*
*---------------------------------------------------------------------*/
static void FPT_scasid(UCHAR p_card, ULONG p_port)
{
UCHAR temp_id_string[ID_STRING_LENGTH];
UCHAR i,k,scam_id;
UCHAR crcBytes[3];
PNVRamInfo pCurrNvRam;
ushort_ptr pCrcBytes;
pCurrNvRam = FPT_BL_Card[p_card].pNvRamInfo;
i=0;
while (!i)
{
for (k=0; k < ID_STRING_LENGTH; k++)
{
temp_id_string[k] = (UCHAR) 0x00;
}
FPT_scxferc(p_port,SYNC_PTRN);
FPT_scxferc(p_port,ASSIGN_ID);
if (!(FPT_sciso(p_port,&temp_id_string[0])))
{
if(pCurrNvRam){
pCrcBytes = (ushort_ptr)&crcBytes[0];
*pCrcBytes = FPT_CalcCrc16(&temp_id_string[0]);
crcBytes[2] = FPT_CalcLrc(&temp_id_string[0]);
temp_id_string[1] = crcBytes[2];
temp_id_string[2] = crcBytes[0];
temp_id_string[3] = crcBytes[1];
for(k = 4; k < ID_STRING_LENGTH; k++)
temp_id_string[k] = (UCHAR) 0x00;
}
i = FPT_scmachid(p_card,temp_id_string);
if (i == CLR_PRIORITY)
{
FPT_scxferc(p_port,MISC_CODE);
FPT_scxferc(p_port,CLR_P_FLAG);
i = 0; /*Not the last ID yet. */
}
else if (i != NO_ID_AVAIL)
{
if (i < 8 )
FPT_scxferc(p_port,ID_0_7);
else
FPT_scxferc(p_port,ID_8_F);
scam_id = (i & (UCHAR) 0x07);
for (k=1; k < 0x08; k <<= 1)
if (!( k & i ))
scam_id += 0x08; /*Count number of zeros in DB0-3. */
FPT_scxferc(p_port,scam_id);
i = 0; /*Not the last ID yet. */
}
}
else
{
i = 1;
}
} /*End while */
FPT_scxferc(p_port,SYNC_PTRN);
FPT_scxferc(p_port,CFG_CMPLT);
}
/*---------------------------------------------------------------------
*
* Function: FPT_scsel
*
* Description: Select all the SCAM devices.
*
*---------------------------------------------------------------------*/
static void FPT_scsel(ULONG p_port)
{
WR_HARPOON(p_port+hp_scsisig, SCSI_SEL);
FPT_scwiros(p_port, SCSI_MSG);
WR_HARPOON(p_port+hp_scsisig, (SCSI_SEL | SCSI_BSY));
WR_HARPOON(p_port+hp_scsisig, (SCSI_SEL | SCSI_BSY | SCSI_IOBIT | SCSI_CD));
WR_HARPOON(p_port+hp_scsidata_0, (UCHAR)(RD_HARPOON(p_port+hp_scsidata_0) |
(UCHAR)(BIT(7)+BIT(6))));
WR_HARPOON(p_port+hp_scsisig, (SCSI_BSY | SCSI_IOBIT | SCSI_CD));
FPT_scwiros(p_port, SCSI_SEL);
WR_HARPOON(p_port+hp_scsidata_0, (UCHAR)(RD_HARPOON(p_port+hp_scsidata_0) &
~(UCHAR)BIT(6)));
FPT_scwirod(p_port, BIT(6));
WR_HARPOON(p_port+hp_scsisig, (SCSI_SEL | SCSI_BSY | SCSI_IOBIT | SCSI_CD));
}
/*---------------------------------------------------------------------
*
* Function: FPT_scxferc
*
* Description: Handshake the p_data (DB4-0) across the bus.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_scxferc(ULONG p_port, UCHAR p_data)
{
UCHAR curr_data, ret_data;
curr_data = p_data | BIT(7) | BIT(5); /*Start with DB7 & DB5 asserted. */
WR_HARPOON(p_port+hp_scsidata_0, curr_data);
curr_data &= ~BIT(7);
WR_HARPOON(p_port+hp_scsidata_0, curr_data);
FPT_scwirod(p_port,BIT(7)); /*Wait for DB7 to be released. */
while (!(RD_HARPOON(p_port+hp_scsidata_0) & BIT(5)));
ret_data = (RD_HARPOON(p_port+hp_scsidata_0) & (UCHAR) 0x1F);
curr_data |= BIT(6);
WR_HARPOON(p_port+hp_scsidata_0, curr_data);
curr_data &= ~BIT(5);
WR_HARPOON(p_port+hp_scsidata_0, curr_data);
FPT_scwirod(p_port,BIT(5)); /*Wait for DB5 to be released. */
curr_data &= ~(BIT(4)|BIT(3)|BIT(2)|BIT(1)|BIT(0)); /*Release data bits */
curr_data |= BIT(7);
WR_HARPOON(p_port+hp_scsidata_0, curr_data);
curr_data &= ~BIT(6);
WR_HARPOON(p_port+hp_scsidata_0, curr_data);
FPT_scwirod(p_port,BIT(6)); /*Wait for DB6 to be released. */
return(ret_data);
}
/*---------------------------------------------------------------------
*
* Function: FPT_scsendi
*
* Description: Transfer our Identification string to determine if we
* will be the dominant master.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_scsendi(ULONG p_port, UCHAR p_id_string[])
{
UCHAR ret_data,byte_cnt,bit_cnt,defer;
defer = 0;
for (byte_cnt = 0; byte_cnt < ID_STRING_LENGTH; byte_cnt++) {
for (bit_cnt = 0x80; bit_cnt != 0 ; bit_cnt >>= 1) {
if (defer)
ret_data = FPT_scxferc(p_port,00);
else if (p_id_string[byte_cnt] & bit_cnt)
ret_data = FPT_scxferc(p_port,02);
else {
ret_data = FPT_scxferc(p_port,01);
if (ret_data & 02)
defer = 1;
}
if ((ret_data & 0x1C) == 0x10)
return(0x00); /*End of isolation stage, we won! */
if (ret_data & 0x1C)
return(0xFF);
if ((defer) && (!(ret_data & 0x1F)))
return(0x01); /*End of isolation stage, we lost. */
} /*bit loop */
} /*byte loop */
if (defer)
return(0x01); /*We lost */
else
return(0); /*We WON! Yeeessss! */
}
/*---------------------------------------------------------------------
*
* Function: FPT_sciso
*
* Description: Transfer the Identification string.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_sciso(ULONG p_port, UCHAR p_id_string[])
{
UCHAR ret_data,the_data,byte_cnt,bit_cnt;
the_data = 0;
for (byte_cnt = 0; byte_cnt < ID_STRING_LENGTH; byte_cnt++) {
for (bit_cnt = 0; bit_cnt < 8; bit_cnt++) {
ret_data = FPT_scxferc(p_port,0);
if (ret_data & 0xFC)
return(0xFF);
else {
the_data <<= 1;
if (ret_data & BIT(1)) {
the_data |= 1;
}
}
if ((ret_data & 0x1F) == 0)
{
/*
if(bit_cnt != 0 || bit_cnt != 8)
{
byte_cnt = 0;
bit_cnt = 0;
FPT_scxferc(p_port, SYNC_PTRN);
FPT_scxferc(p_port, ASSIGN_ID);
continue;
}
*/
if (byte_cnt)
return(0x00);
else
return(0xFF);
}
} /*bit loop */
p_id_string[byte_cnt] = the_data;
} /*byte loop */
return(0);
}
/*---------------------------------------------------------------------
*
* Function: FPT_scwirod
*
* Description: Sample the SCSI data bus making sure the signal has been
* deasserted for the correct number of consecutive samples.
*
*---------------------------------------------------------------------*/
static void FPT_scwirod(ULONG p_port, UCHAR p_data_bit)
{
UCHAR i;
i = 0;
while ( i < MAX_SCSI_TAR ) {
if (RD_HARPOON(p_port+hp_scsidata_0) & p_data_bit)
i = 0;
else
i++;
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_scwiros
*
* Description: Sample the SCSI Signal lines making sure the signal has been
* deasserted for the correct number of consecutive samples.
*
*---------------------------------------------------------------------*/
static void FPT_scwiros(ULONG p_port, UCHAR p_data_bit)
{
UCHAR i;
i = 0;
while ( i < MAX_SCSI_TAR ) {
if (RD_HARPOON(p_port+hp_scsisig) & p_data_bit)
i = 0;
else
i++;
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_scvalq
*
* Description: Make sure we received a valid data byte.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_scvalq(UCHAR p_quintet)
{
UCHAR count;
for (count=1; count < 0x08; count<<=1) {
if (!(p_quintet & count))
p_quintet -= 0x80;
}
if (p_quintet & 0x18)
return(0);
else
return(1);
}
/*---------------------------------------------------------------------
*
* Function: FPT_scsell
*
* Description: Select the specified device ID using a selection timeout
* less than 4ms. If somebody responds then it is a legacy
* drive and this ID must be marked as such.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_scsell(ULONG p_port, UCHAR targ_id)
{
ULONG i;
WR_HARPOON(p_port+hp_page_ctrl,
(RD_HARPOON(p_port+hp_page_ctrl) | G_INT_DISABLE));
ARAM_ACCESS(p_port);
WR_HARPOON(p_port+hp_addstat,(RD_HARPOON(p_port+hp_addstat) | SCAM_TIMER));
WR_HARPOON(p_port+hp_seltimeout,TO_4ms);
for (i = p_port+CMD_STRT; i < p_port+CMD_STRT+12; i+=2) {
WRW_HARPOON(i, (MPM_OP+ACOMMAND));
}
WRW_HARPOON(i, (BRH_OP+ALWAYS+ NP));
WRW_HARPOON((p_port+hp_intstat),
(RESET | TIMEOUT | SEL | BUS_FREE | AUTO_INT));
WR_HARPOON(p_port+hp_select_id, targ_id);
WR_HARPOON(p_port+hp_portctrl_0, SCSI_PORT);
WR_HARPOON(p_port+hp_autostart_3, (SELECT | CMD_ONLY_STRT));
WR_HARPOON(p_port+hp_scsictrl_0, (SEL_TAR | ENA_RESEL));
while (!(RDW_HARPOON((p_port+hp_intstat)) &
(RESET | PROG_HLT | TIMEOUT | AUTO_INT))) {}
if (RDW_HARPOON((p_port+hp_intstat)) & RESET)
FPT_Wait(p_port, TO_250ms);
DISABLE_AUTO(p_port);
WR_HARPOON(p_port+hp_addstat,(RD_HARPOON(p_port+hp_addstat) & ~SCAM_TIMER));
WR_HARPOON(p_port+hp_seltimeout,TO_290ms);
SGRAM_ACCESS(p_port);
if (RDW_HARPOON((p_port+hp_intstat)) & (RESET | TIMEOUT) ) {
WRW_HARPOON((p_port+hp_intstat),
(RESET | TIMEOUT | SEL | BUS_FREE | PHASE));
WR_HARPOON(p_port+hp_page_ctrl,
(RD_HARPOON(p_port+hp_page_ctrl) & ~G_INT_DISABLE));
return(0); /*No legacy device */
}
else {
while(!(RDW_HARPOON((p_port+hp_intstat)) & BUS_FREE)) {
if (RD_HARPOON(p_port+hp_scsisig) & SCSI_REQ)
{
WR_HARPOON(p_port+hp_scsisig, (SCSI_ACK + S_ILL_PH));
ACCEPT_MSG(p_port);
}
}
WRW_HARPOON((p_port+hp_intstat), CLR_ALL_INT_1);
WR_HARPOON(p_port+hp_page_ctrl,
(RD_HARPOON(p_port+hp_page_ctrl) & ~G_INT_DISABLE));
return(1); /*Found one of them oldies! */
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_scwtsel
*
* Description: Wait to be selected by another SCAM initiator.
*
*---------------------------------------------------------------------*/
static void FPT_scwtsel(ULONG p_port)
{
while(!(RDW_HARPOON((p_port+hp_intstat)) & SCAM_SEL)) {}
}
/*---------------------------------------------------------------------
*
* Function: FPT_inisci
*
* Description: Setup the data Structure with the info from the EEPROM.
*
*---------------------------------------------------------------------*/
static void FPT_inisci(UCHAR p_card, ULONG p_port, UCHAR p_our_id)
{
UCHAR i,k,max_id;
USHORT ee_data;
PNVRamInfo pCurrNvRam;
pCurrNvRam = FPT_BL_Card[p_card].pNvRamInfo;
if (RD_HARPOON(p_port+hp_page_ctrl) & NARROW_SCSI_CARD)
max_id = 0x08;
else
max_id = 0x10;
if(pCurrNvRam){
for(i = 0; i < max_id; i++){
for(k = 0; k < 4; k++)
FPT_scamInfo[i].id_string[k] = pCurrNvRam->niScamTbl[i][k];
for(k = 4; k < ID_STRING_LENGTH; k++)
FPT_scamInfo[i].id_string[k] = (UCHAR) 0x00;
if(FPT_scamInfo[i].id_string[0] == 0x00)
FPT_scamInfo[i].state = ID_UNUSED; /*Default to unused ID. */
else
FPT_scamInfo[i].state = ID_UNASSIGNED; /*Default to unassigned ID. */
}
}else {
for (i=0; i < max_id; i++)
{
for (k=0; k < ID_STRING_LENGTH; k+=2)
{
ee_data = FPT_utilEERead(p_port, (USHORT)((EE_SCAMBASE/2) +
(USHORT) (i*((USHORT)ID_STRING_LENGTH/2)) + (USHORT)(k/2)));
FPT_scamInfo[i].id_string[k] = (UCHAR) ee_data;
ee_data >>= 8;
FPT_scamInfo[i].id_string[k+1] = (UCHAR) ee_data;
}
if ((FPT_scamInfo[i].id_string[0] == 0x00) ||
(FPT_scamInfo[i].id_string[0] == 0xFF))
FPT_scamInfo[i].state = ID_UNUSED; /*Default to unused ID. */
else
FPT_scamInfo[i].state = ID_UNASSIGNED; /*Default to unassigned ID. */
}
}
for(k = 0; k < ID_STRING_LENGTH; k++)
FPT_scamInfo[p_our_id].id_string[k] = FPT_scamHAString[k];
}
/*---------------------------------------------------------------------
*
* Function: FPT_scmachid
*
* Description: Match the Device ID string with our values stored in
* the EEPROM.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_scmachid(UCHAR p_card, UCHAR p_id_string[])
{
UCHAR i,k,match;
for (i=0; i < MAX_SCSI_TAR; i++) {
match = 1;
for (k=0; k < ID_STRING_LENGTH; k++)
{
if (p_id_string[k] != FPT_scamInfo[i].id_string[k])
match = 0;
}
if (match)
{
FPT_scamInfo[i].state = ID_ASSIGNED;
return(i);
}
}
if (p_id_string[0] & BIT(5))
i = 8;
else
i = MAX_SCSI_TAR;
if (((p_id_string[0] & 0x06) == 0x02) || ((p_id_string[0] & 0x06) == 0x04))
match = p_id_string[1] & (UCHAR) 0x1F;
else
match = 7;
while (i > 0)
{
i--;
if (FPT_scamInfo[match].state == ID_UNUSED)
{
for (k=0; k < ID_STRING_LENGTH; k++)
{
FPT_scamInfo[match].id_string[k] = p_id_string[k];
}
FPT_scamInfo[match].state = ID_ASSIGNED;
if(FPT_BL_Card[p_card].pNvRamInfo == NULL)
FPT_BL_Card[p_card].globalFlags |= F_UPDATE_EEPROM;
return(match);
}
match--;
if (match == 0xFF)
{
if (p_id_string[0] & BIT(5))
match = 7;
else
match = MAX_SCSI_TAR-1;
}
}
if (p_id_string[0] & BIT(7))
{
return(CLR_PRIORITY);
}
if (p_id_string[0] & BIT(5))
i = 8;
else
i = MAX_SCSI_TAR;
if (((p_id_string[0] & 0x06) == 0x02) || ((p_id_string[0] & 0x06) == 0x04))
match = p_id_string[1] & (UCHAR) 0x1F;
else
match = 7;
while (i > 0)
{
i--;
if (FPT_scamInfo[match].state == ID_UNASSIGNED)
{
for (k=0; k < ID_STRING_LENGTH; k++)
{
FPT_scamInfo[match].id_string[k] = p_id_string[k];
}
FPT_scamInfo[match].id_string[0] |= BIT(7);
FPT_scamInfo[match].state = ID_ASSIGNED;
if(FPT_BL_Card[p_card].pNvRamInfo == NULL)
FPT_BL_Card[p_card].globalFlags |= F_UPDATE_EEPROM;
return(match);
}
match--;
if (match == 0xFF)
{
if (p_id_string[0] & BIT(5))
match = 7;
else
match = MAX_SCSI_TAR-1;
}
}
return(NO_ID_AVAIL);
}
/*---------------------------------------------------------------------
*
* Function: FPT_scsavdi
*
* Description: Save off the device SCAM ID strings.
*
*---------------------------------------------------------------------*/
static void FPT_scsavdi(UCHAR p_card, ULONG p_port)
{
UCHAR i,k,max_id;
USHORT ee_data,sum_data;
sum_data = 0x0000;
for (i = 1; i < EE_SCAMBASE/2; i++)
{
sum_data += FPT_utilEERead(p_port, i);
}
FPT_utilEEWriteOnOff(p_port,1); /* Enable write access to the EEPROM */
if (RD_HARPOON(p_port+hp_page_ctrl) & NARROW_SCSI_CARD)
max_id = 0x08;
else
max_id = 0x10;
for (i=0; i < max_id; i++)
{
for (k=0; k < ID_STRING_LENGTH; k+=2)
{
ee_data = FPT_scamInfo[i].id_string[k+1];
ee_data <<= 8;
ee_data |= FPT_scamInfo[i].id_string[k];
sum_data += ee_data;
FPT_utilEEWrite(p_port, ee_data, (USHORT)((EE_SCAMBASE/2) +
(USHORT)(i*((USHORT)ID_STRING_LENGTH/2)) + (USHORT)(k/2)));
}
}
FPT_utilEEWrite(p_port, sum_data, EEPROM_CHECK_SUM/2);
FPT_utilEEWriteOnOff(p_port,0); /* Turn off write access */
}
/*---------------------------------------------------------------------
*
* Function: FPT_XbowInit
*
* Description: Setup the Xbow for normal operation.
*
*---------------------------------------------------------------------*/
static void FPT_XbowInit(ULONG port, UCHAR ScamFlg)
{
UCHAR i;
i = RD_HARPOON(port+hp_page_ctrl);
WR_HARPOON(port+hp_page_ctrl, (UCHAR) (i | G_INT_DISABLE));
WR_HARPOON(port+hp_scsireset,0x00);
WR_HARPOON(port+hp_portctrl_1,HOST_MODE8);
WR_HARPOON(port+hp_scsireset,(DMA_RESET | HPSCSI_RESET | PROG_RESET | \
FIFO_CLR));
WR_HARPOON(port+hp_scsireset,SCSI_INI);
WR_HARPOON(port+hp_clkctrl_0,CLKCTRL_DEFAULT);
WR_HARPOON(port+hp_scsisig,0x00); /* Clear any signals we might */
WR_HARPOON(port+hp_scsictrl_0,ENA_SCAM_SEL);
WRW_HARPOON((port+hp_intstat), CLR_ALL_INT);
FPT_default_intena = RESET | RSEL | PROG_HLT | TIMEOUT |
BUS_FREE | XFER_CNT_0 | AUTO_INT;
if ((ScamFlg & SCAM_ENABLED) && (ScamFlg & SCAM_LEVEL2))
FPT_default_intena |= SCAM_SEL;
WRW_HARPOON((port+hp_intena), FPT_default_intena);
WR_HARPOON(port+hp_seltimeout,TO_290ms);
/* Turn on SCSI_MODE8 for narrow cards to fix the
strapping issue with the DUAL CHANNEL card */
if (RD_HARPOON(port+hp_page_ctrl) & NARROW_SCSI_CARD)
WR_HARPOON(port+hp_addstat,SCSI_MODE8);
WR_HARPOON(port+hp_page_ctrl, i);
}
/*---------------------------------------------------------------------
*
* Function: FPT_BusMasterInit
*
* Description: Initialize the BusMaster for normal operations.
*
*---------------------------------------------------------------------*/
static void FPT_BusMasterInit(ULONG p_port)
{
WR_HARPOON(p_port+hp_sys_ctrl, DRVR_RST);
WR_HARPOON(p_port+hp_sys_ctrl, 0x00);
WR_HARPOON(p_port+hp_host_blk_cnt, XFER_BLK64);
WR_HARPOON(p_port+hp_bm_ctrl, (BMCTRL_DEFAULT));
WR_HARPOON(p_port+hp_ee_ctrl, (SCSI_TERM_ENA_H));
RD_HARPOON(p_port+hp_int_status); /*Clear interrupts. */
WR_HARPOON(p_port+hp_int_mask, (INT_CMD_COMPL | SCSI_INTERRUPT));
WR_HARPOON(p_port+hp_page_ctrl, (RD_HARPOON(p_port+hp_page_ctrl) &
~SCATTER_EN));
}
/*---------------------------------------------------------------------
*
* Function: FPT_DiagEEPROM
*
* Description: Verfiy checksum and 'Key' and initialize the EEPROM if
* necessary.
*
*---------------------------------------------------------------------*/
static void FPT_DiagEEPROM(ULONG p_port)
{
USHORT index,temp,max_wd_cnt;
if (RD_HARPOON(p_port+hp_page_ctrl) & NARROW_SCSI_CARD)
max_wd_cnt = EEPROM_WD_CNT;
else
max_wd_cnt = EEPROM_WD_CNT * 2;
temp = FPT_utilEERead(p_port, FW_SIGNATURE/2);
if (temp == 0x4641) {
for (index = 2; index < max_wd_cnt; index++) {
temp += FPT_utilEERead(p_port, index);
}
if (temp == FPT_utilEERead(p_port, EEPROM_CHECK_SUM/2)) {
return; /*EEPROM is Okay so return now! */
}
}
FPT_utilEEWriteOnOff(p_port,(UCHAR)1);
for (index = 0; index < max_wd_cnt; index++) {
FPT_utilEEWrite(p_port, 0x0000, index);
}
temp = 0;
FPT_utilEEWrite(p_port, 0x4641, FW_SIGNATURE/2);
temp += 0x4641;
FPT_utilEEWrite(p_port, 0x3920, MODEL_NUMB_0/2);
temp += 0x3920;
FPT_utilEEWrite(p_port, 0x3033, MODEL_NUMB_2/2);
temp += 0x3033;
FPT_utilEEWrite(p_port, 0x2020, MODEL_NUMB_4/2);
temp += 0x2020;
FPT_utilEEWrite(p_port, 0x70D3, SYSTEM_CONFIG/2);
temp += 0x70D3;
FPT_utilEEWrite(p_port, 0x0010, BIOS_CONFIG/2);
temp += 0x0010;
FPT_utilEEWrite(p_port, 0x0003, SCAM_CONFIG/2);
temp += 0x0003;
FPT_utilEEWrite(p_port, 0x0007, ADAPTER_SCSI_ID/2);
temp += 0x0007;
FPT_utilEEWrite(p_port, 0x0000, IGNORE_B_SCAN/2);
temp += 0x0000;
FPT_utilEEWrite(p_port, 0x0000, SEND_START_ENA/2);
temp += 0x0000;
FPT_utilEEWrite(p_port, 0x0000, DEVICE_ENABLE/2);
temp += 0x0000;
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL01/2);
temp += 0x4242;
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL23/2);
temp += 0x4242;
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL45/2);
temp += 0x4242;
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL67/2);
temp += 0x4242;
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBL89/2);
temp += 0x4242;
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBLab/2);
temp += 0x4242;
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBLcd/2);
temp += 0x4242;
FPT_utilEEWrite(p_port, 0x4242, SYNC_RATE_TBLef/2);
temp += 0x4242;
FPT_utilEEWrite(p_port, 0x6C46, 64/2); /*PRODUCT ID */
temp += 0x6C46;
FPT_utilEEWrite(p_port, 0x7361, 66/2); /* FlashPoint LT */
temp += 0x7361;
FPT_utilEEWrite(p_port, 0x5068, 68/2);
temp += 0x5068;
FPT_utilEEWrite(p_port, 0x696F, 70/2);
temp += 0x696F;
FPT_utilEEWrite(p_port, 0x746E, 72/2);
temp += 0x746E;
FPT_utilEEWrite(p_port, 0x4C20, 74/2);
temp += 0x4C20;
FPT_utilEEWrite(p_port, 0x2054, 76/2);
temp += 0x2054;
FPT_utilEEWrite(p_port, 0x2020, 78/2);
temp += 0x2020;
index = ((EE_SCAMBASE/2)+(7*16));
FPT_utilEEWrite(p_port, (0x0700+TYPE_CODE0), index);
temp += (0x0700+TYPE_CODE0);
index++;
FPT_utilEEWrite(p_port, 0x5542, index); /*Vendor ID code */
temp += 0x5542; /* BUSLOGIC */
index++;
FPT_utilEEWrite(p_port, 0x4C53, index);
temp += 0x4C53;
index++;
FPT_utilEEWrite(p_port, 0x474F, index);
temp += 0x474F;
index++;
FPT_utilEEWrite(p_port, 0x4349, index);
temp += 0x4349;
index++;
FPT_utilEEWrite(p_port, 0x5442, index); /*Vendor unique code */
temp += 0x5442; /* BT- 930 */
index++;
FPT_utilEEWrite(p_port, 0x202D, index);
temp += 0x202D;
index++;
FPT_utilEEWrite(p_port, 0x3339, index);
temp += 0x3339;
index++; /*Serial # */
FPT_utilEEWrite(p_port, 0x2030, index); /* 01234567 */
temp += 0x2030;
index++;
FPT_utilEEWrite(p_port, 0x5453, index);
temp += 0x5453;
index++;
FPT_utilEEWrite(p_port, 0x5645, index);
temp += 0x5645;
index++;
FPT_utilEEWrite(p_port, 0x2045, index);
temp += 0x2045;
index++;
FPT_utilEEWrite(p_port, 0x202F, index);
temp += 0x202F;
index++;
FPT_utilEEWrite(p_port, 0x4F4A, index);
temp += 0x4F4A;
index++;
FPT_utilEEWrite(p_port, 0x204E, index);
temp += 0x204E;
index++;
FPT_utilEEWrite(p_port, 0x3539, index);
temp += 0x3539;
FPT_utilEEWrite(p_port, temp, EEPROM_CHECK_SUM/2);
FPT_utilEEWriteOnOff(p_port,(UCHAR)0);
}
/*---------------------------------------------------------------------
*
* Function: Queue Search Select
*
* Description: Try to find a new command to execute.
*
*---------------------------------------------------------------------*/
static void FPT_queueSearchSelect(PSCCBcard pCurrCard, UCHAR p_card)
{
UCHAR scan_ptr, lun;
PSCCBMgr_tar_info currTar_Info;
PSCCB pOldSccb;
scan_ptr = pCurrCard->scanIndex;
do
{
currTar_Info = &FPT_sccbMgrTbl[p_card][scan_ptr];
if((pCurrCard->globalFlags & F_CONLUN_IO) &&
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING))
{
if (currTar_Info->TarSelQ_Cnt != 0)
{
scan_ptr++;
if (scan_ptr == MAX_SCSI_TAR)
scan_ptr = 0;
for(lun=0; lun < MAX_LUN; lun++)
{
if(currTar_Info->TarLUNBusy[lun] == 0)
{
pCurrCard->currentSCCB = currTar_Info->TarSelQ_Head;
pOldSccb = NULL;
while((pCurrCard->currentSCCB != NULL) &&
(lun != pCurrCard->currentSCCB->Lun))
{
pOldSccb = pCurrCard->currentSCCB;
pCurrCard->currentSCCB = (PSCCB)(pCurrCard->currentSCCB)->
Sccb_forwardlink;
}
if(pCurrCard->currentSCCB == NULL)
continue;
if(pOldSccb != NULL)
{
pOldSccb->Sccb_forwardlink = (PSCCB)(pCurrCard->currentSCCB)->
Sccb_forwardlink;
pOldSccb->Sccb_backlink = (PSCCB)(pCurrCard->currentSCCB)->
Sccb_backlink;
currTar_Info->TarSelQ_Cnt--;
}
else
{
currTar_Info->TarSelQ_Head = (PSCCB)(pCurrCard->currentSCCB)->Sccb_forwardlink;
if (currTar_Info->TarSelQ_Head == NULL)
{
currTar_Info->TarSelQ_Tail = NULL;
currTar_Info->TarSelQ_Cnt = 0;
}
else
{
currTar_Info->TarSelQ_Cnt--;
currTar_Info->TarSelQ_Head->Sccb_backlink = (PSCCB)NULL;
}
}
pCurrCard->scanIndex = scan_ptr;
pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
break;
}
}
}
else
{
scan_ptr++;
if (scan_ptr == MAX_SCSI_TAR) {
scan_ptr = 0;
}
}
}
else
{
if ((currTar_Info->TarSelQ_Cnt != 0) &&
(currTar_Info->TarLUNBusy[0] == 0))
{
pCurrCard->currentSCCB = currTar_Info->TarSelQ_Head;
currTar_Info->TarSelQ_Head = (PSCCB)(pCurrCard->currentSCCB)->Sccb_forwardlink;
if (currTar_Info->TarSelQ_Head == NULL)
{
currTar_Info->TarSelQ_Tail = NULL;
currTar_Info->TarSelQ_Cnt = 0;
}
else
{
currTar_Info->TarSelQ_Cnt--;
currTar_Info->TarSelQ_Head->Sccb_backlink = (PSCCB)NULL;
}
scan_ptr++;
if (scan_ptr == MAX_SCSI_TAR)
scan_ptr = 0;
pCurrCard->scanIndex = scan_ptr;
pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
break;
}
else
{
scan_ptr++;
if (scan_ptr == MAX_SCSI_TAR)
{
scan_ptr = 0;
}
}
}
} while (scan_ptr != pCurrCard->scanIndex);
}
/*---------------------------------------------------------------------
*
* Function: Queue Select Fail
*
* Description: Add the current SCCB to the head of the Queue.
*
*---------------------------------------------------------------------*/
static void FPT_queueSelectFail(PSCCBcard pCurrCard, UCHAR p_card)
{
UCHAR thisTarg;
PSCCBMgr_tar_info currTar_Info;
if (pCurrCard->currentSCCB != NULL)
{
thisTarg = (UCHAR)(((PSCCB)(pCurrCard->currentSCCB))->TargID);
currTar_Info = &FPT_sccbMgrTbl[p_card][thisTarg];
pCurrCard->currentSCCB->Sccb_backlink = (PSCCB)NULL;
pCurrCard->currentSCCB->Sccb_forwardlink = currTar_Info->TarSelQ_Head;
if (currTar_Info->TarSelQ_Cnt == 0)
{
currTar_Info->TarSelQ_Tail = pCurrCard->currentSCCB;
}
else
{
currTar_Info->TarSelQ_Head->Sccb_backlink = pCurrCard->currentSCCB;
}
currTar_Info->TarSelQ_Head = pCurrCard->currentSCCB;
pCurrCard->currentSCCB = NULL;
currTar_Info->TarSelQ_Cnt++;
}
}
/*---------------------------------------------------------------------
*
* Function: Queue Command Complete
*
* Description: Call the callback function with the current SCCB.
*
*---------------------------------------------------------------------*/
static void FPT_queueCmdComplete(PSCCBcard pCurrCard, PSCCB p_sccb,
UCHAR p_card)
{
UCHAR i, SCSIcmd;
CALL_BK_FN callback;
PSCCBMgr_tar_info currTar_Info;
SCSIcmd = p_sccb->Cdb[0];
if (!(p_sccb->Sccb_XferState & F_ALL_XFERRED)) {
if ((p_sccb->ControlByte & (SCCB_DATA_XFER_OUT | SCCB_DATA_XFER_IN)) &&
(p_sccb->HostStatus == SCCB_COMPLETE) &&
(p_sccb->TargetStatus != SSCHECK))
if ((SCSIcmd == SCSI_READ) ||
(SCSIcmd == SCSI_WRITE) ||
(SCSIcmd == SCSI_READ_EXTENDED) ||
(SCSIcmd == SCSI_WRITE_EXTENDED) ||
(SCSIcmd == SCSI_WRITE_AND_VERIFY) ||
(SCSIcmd == SCSI_START_STOP_UNIT) ||
(pCurrCard->globalFlags & F_NO_FILTER)
)
p_sccb->HostStatus = SCCB_DATA_UNDER_RUN;
}
if(p_sccb->SccbStatus == SCCB_IN_PROCESS)
{
if (p_sccb->HostStatus || p_sccb->TargetStatus)
p_sccb->SccbStatus = SCCB_ERROR;
else
p_sccb->SccbStatus = SCCB_SUCCESS;
}
if (p_sccb->Sccb_XferState & F_AUTO_SENSE) {
p_sccb->CdbLength = p_sccb->Save_CdbLen;
for (i=0; i < 6; i++) {
p_sccb->Cdb[i] = p_sccb->Save_Cdb[i];
}
}
if ((p_sccb->OperationCode == RESIDUAL_SG_COMMAND) ||
(p_sccb->OperationCode == RESIDUAL_COMMAND)) {
FPT_utilUpdateResidual(p_sccb);
}
pCurrCard->cmdCounter--;
if (!pCurrCard->cmdCounter) {
if (pCurrCard->globalFlags & F_GREEN_PC) {
WR_HARPOON(pCurrCard->ioPort+hp_clkctrl_0,(PWR_DWN | CLKCTRL_DEFAULT));
WR_HARPOON(pCurrCard->ioPort+hp_sys_ctrl, STOP_CLK);
}
WR_HARPOON(pCurrCard->ioPort+hp_semaphore,
(RD_HARPOON(pCurrCard->ioPort+hp_semaphore) & ~SCCB_MGR_ACTIVE));
}
if(pCurrCard->discQCount != 0)
{
currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
if(((pCurrCard->globalFlags & F_CONLUN_IO) &&
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
{
pCurrCard->discQCount--;
pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[p_sccb->Lun]] = NULL;
}
else
{
if(p_sccb->Sccb_tag)
{
pCurrCard->discQCount--;
pCurrCard->discQ_Tbl[p_sccb->Sccb_tag] = NULL;
}else
{
pCurrCard->discQCount--;
pCurrCard->discQ_Tbl[currTar_Info->LunDiscQ_Idx[0]] = NULL;
}
}
}
callback = (CALL_BK_FN)p_sccb->SccbCallback;
callback(p_sccb);
pCurrCard->globalFlags |= F_NEW_SCCB_CMD;
pCurrCard->currentSCCB = NULL;
}
/*---------------------------------------------------------------------
*
* Function: Queue Disconnect
*
* Description: Add SCCB to our disconnect array.
*
*---------------------------------------------------------------------*/
static void FPT_queueDisconnect(PSCCB p_sccb, UCHAR p_card)
{
PSCCBMgr_tar_info currTar_Info;
currTar_Info = &FPT_sccbMgrTbl[p_card][p_sccb->TargID];
if(((FPT_BL_Card[p_card].globalFlags & F_CONLUN_IO) &&
((currTar_Info->TarStatus & TAR_TAG_Q_MASK) != TAG_Q_TRYING)))
{
FPT_BL_Card[p_card].discQ_Tbl[currTar_Info->LunDiscQ_Idx[p_sccb->Lun]] = p_sccb;
}
else
{
if (p_sccb->Sccb_tag)
{
FPT_BL_Card[p_card].discQ_Tbl[p_sccb->Sccb_tag] = p_sccb;
FPT_sccbMgrTbl[p_card][p_sccb->TargID].TarLUNBusy[0] = 0;
FPT_sccbMgrTbl[p_card][p_sccb->TargID].TarTagQ_Cnt++;
}else
{
FPT_BL_Card[p_card].discQ_Tbl[currTar_Info->LunDiscQ_Idx[0]] = p_sccb;
}
}
FPT_BL_Card[p_card].currentSCCB = NULL;
}
/*---------------------------------------------------------------------
*
* Function: Queue Flush SCCB
*
* Description: Flush all SCCB's back to the host driver for this target.
*
*---------------------------------------------------------------------*/
static void FPT_queueFlushSccb(UCHAR p_card, UCHAR error_code)
{
UCHAR qtag,thisTarg;
PSCCB currSCCB;
PSCCBMgr_tar_info currTar_Info;
currSCCB = FPT_BL_Card[p_card].currentSCCB;
if(currSCCB != NULL)
{
thisTarg = (UCHAR)currSCCB->TargID;
currTar_Info = &FPT_sccbMgrTbl[p_card][thisTarg];
for (qtag=0; qtag<QUEUE_DEPTH; qtag++) {
if (FPT_BL_Card[p_card].discQ_Tbl[qtag] &&
(FPT_BL_Card[p_card].discQ_Tbl[qtag]->TargID == thisTarg))
{
FPT_BL_Card[p_card].discQ_Tbl[qtag]->HostStatus = (UCHAR)error_code;
FPT_queueCmdComplete(&FPT_BL_Card[p_card],FPT_BL_Card[p_card].discQ_Tbl[qtag], p_card);
FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
currTar_Info->TarTagQ_Cnt--;
}
}
}
}
/*---------------------------------------------------------------------
*
* Function: Queue Flush Target SCCB
*
* Description: Flush all SCCB's back to the host driver for this target.
*
*---------------------------------------------------------------------*/
static void FPT_queueFlushTargSccb(UCHAR p_card, UCHAR thisTarg,
UCHAR error_code)
{
UCHAR qtag;
PSCCBMgr_tar_info currTar_Info;
currTar_Info = &FPT_sccbMgrTbl[p_card][thisTarg];
for (qtag=0; qtag<QUEUE_DEPTH; qtag++) {
if (FPT_BL_Card[p_card].discQ_Tbl[qtag] &&
(FPT_BL_Card[p_card].discQ_Tbl[qtag]->TargID == thisTarg))
{
FPT_BL_Card[p_card].discQ_Tbl[qtag]->HostStatus = (UCHAR)error_code;
FPT_queueCmdComplete(&FPT_BL_Card[p_card],FPT_BL_Card[p_card].discQ_Tbl[qtag], p_card);
FPT_BL_Card[p_card].discQ_Tbl[qtag] = NULL;
currTar_Info->TarTagQ_Cnt--;
}
}
}
static void FPT_queueAddSccb(PSCCB p_SCCB, UCHAR p_card)
{
PSCCBMgr_tar_info currTar_Info;
currTar_Info = &FPT_sccbMgrTbl[p_card][p_SCCB->TargID];
p_SCCB->Sccb_forwardlink = NULL;
p_SCCB->Sccb_backlink = currTar_Info->TarSelQ_Tail;
if (currTar_Info->TarSelQ_Cnt == 0) {
currTar_Info->TarSelQ_Head = p_SCCB;
}
else {
currTar_Info->TarSelQ_Tail->Sccb_forwardlink = p_SCCB;
}
currTar_Info->TarSelQ_Tail = p_SCCB;
currTar_Info->TarSelQ_Cnt++;
}
/*---------------------------------------------------------------------
*
* Function: Queue Find SCCB
*
* Description: Search the target select Queue for this SCCB, and
* remove it if found.
*
*---------------------------------------------------------------------*/
static UCHAR FPT_queueFindSccb(PSCCB p_SCCB, UCHAR p_card)
{
PSCCB q_ptr;
PSCCBMgr_tar_info currTar_Info;
currTar_Info = &FPT_sccbMgrTbl[p_card][p_SCCB->TargID];
q_ptr = currTar_Info->TarSelQ_Head;
while(q_ptr != NULL) {
if (q_ptr == p_SCCB) {
if (currTar_Info->TarSelQ_Head == q_ptr) {
currTar_Info->TarSelQ_Head = q_ptr->Sccb_forwardlink;
}
if (currTar_Info->TarSelQ_Tail == q_ptr) {
currTar_Info->TarSelQ_Tail = q_ptr->Sccb_backlink;
}
if (q_ptr->Sccb_forwardlink != NULL) {
q_ptr->Sccb_forwardlink->Sccb_backlink = q_ptr->Sccb_backlink;
}
if (q_ptr->Sccb_backlink != NULL) {
q_ptr->Sccb_backlink->Sccb_forwardlink = q_ptr->Sccb_forwardlink;
}
currTar_Info->TarSelQ_Cnt--;
return(1);
}
else {
q_ptr = q_ptr->Sccb_forwardlink;
}
}
return(0);
}
/*---------------------------------------------------------------------
*
* Function: Utility Update Residual Count
*
* Description: Update the XferCnt to the remaining byte count.
* If we transferred all the data then just write zero.
* If Non-SG transfer then report Total Cnt - Actual Transfer
* Cnt. For SG transfers add the count fields of all
* remaining SG elements, as well as any partial remaining
* element.
*
*---------------------------------------------------------------------*/
static void FPT_utilUpdateResidual(PSCCB p_SCCB)
{
ULONG partial_cnt;
UINT sg_index;
ULONG *sg_ptr;
if (p_SCCB->Sccb_XferState & F_ALL_XFERRED) {
p_SCCB->DataLength = 0x0000;
}
else if (p_SCCB->Sccb_XferState & F_SG_XFER) {
partial_cnt = 0x0000;
sg_index = p_SCCB->Sccb_sgseg;
sg_ptr = (ULONG *)p_SCCB->DataPointer;
if (p_SCCB->Sccb_SGoffset) {
partial_cnt = p_SCCB->Sccb_SGoffset;
sg_index++;
}
while ( ((ULONG)sg_index * (ULONG)SG_ELEMENT_SIZE) <
p_SCCB->DataLength ) {
partial_cnt += *(sg_ptr+(sg_index * 2));
sg_index++;
}
p_SCCB->DataLength = partial_cnt;
}
else {
p_SCCB->DataLength -= p_SCCB->Sccb_ATC;
}
}
/*---------------------------------------------------------------------
*
* Function: Wait 1 Second
*
* Description: Wait for 1 second.
*
*---------------------------------------------------------------------*/
static void FPT_Wait1Second(ULONG p_port)
{
UCHAR i;
for(i=0; i < 4; i++) {
FPT_Wait(p_port, TO_250ms);
if ((RD_HARPOON(p_port+hp_scsictrl_0) & SCSI_RST))
break;
if((RDW_HARPOON((p_port+hp_intstat)) & SCAM_SEL))
break;
}
}
/*---------------------------------------------------------------------
*
* Function: FPT_Wait
*
* Description: Wait the desired delay.
*
*---------------------------------------------------------------------*/
static void FPT_Wait(ULONG p_port, UCHAR p_delay)
{
UCHAR old_timer;
UCHAR green_flag;
old_timer = RD_HARPOON(p_port+hp_seltimeout);
green_flag=RD_HARPOON(p_port+hp_clkctrl_0);
WR_HARPOON(p_port+hp_clkctrl_0, CLKCTRL_DEFAULT);
WR_HARPOON(p_port+hp_seltimeout,p_delay);
WRW_HARPOON((p_port+hp_intstat), TIMEOUT);
WRW_HARPOON((p_port+hp_intena), (FPT_default_intena & ~TIMEOUT));
WR_HARPOON(p_port+hp_portctrl_0,
(RD_HARPOON(p_port+hp_portctrl_0) | START_TO));
while (!(RDW_HARPOON((p_port+hp_intstat)) & TIMEOUT)) {
if ((RD_HARPOON(p_port+hp_scsictrl_0) & SCSI_RST))
break;
if ((RDW_HARPOON((p_port+hp_intstat)) & SCAM_SEL))
break;
}
WR_HARPOON(p_port+hp_portctrl_0,
(RD_HARPOON(p_port+hp_portctrl_0) & ~START_TO));
WRW_HARPOON((p_port+hp_intstat), TIMEOUT);
WRW_HARPOON((p_port+hp_intena), FPT_default_intena);
WR_HARPOON(p_port+hp_clkctrl_0,green_flag);
WR_HARPOON(p_port+hp_seltimeout,old_timer);
}
/*---------------------------------------------------------------------
*
* Function: Enable/Disable Write to EEPROM
*
* Description: The EEPROM must first be enabled for writes
* A total of 9 clocks are needed.
*
*---------------------------------------------------------------------*/
static void FPT_utilEEWriteOnOff(ULONG p_port,UCHAR p_mode)
{
UCHAR ee_value;
ee_value = (UCHAR)(RD_HARPOON(p_port+hp_ee_ctrl) & (EXT_ARB_ACK | SCSI_TERM_ENA_H));
if (p_mode)
FPT_utilEESendCmdAddr(p_port, EWEN, EWEN_ADDR);
else
FPT_utilEESendCmdAddr(p_port, EWDS, EWDS_ADDR);
WR_HARPOON(p_port+hp_ee_ctrl, (ee_value | SEE_MS)); /*Turn off CS */
WR_HARPOON(p_port+hp_ee_ctrl, ee_value); /*Turn off Master Select */
}
/*---------------------------------------------------------------------
*
* Function: Write EEPROM
*
* Description: Write a word to the EEPROM at the specified
* address.
*
*---------------------------------------------------------------------*/
static void FPT_utilEEWrite(ULONG p_port, USHORT ee_data, USHORT ee_addr)
{
UCHAR ee_value;
USHORT i;
ee_value = (UCHAR)((RD_HARPOON(p_port+hp_ee_ctrl) & (EXT_ARB_ACK | SCSI_TERM_ENA_H))|
(SEE_MS | SEE_CS));
FPT_utilEESendCmdAddr(p_port, EE_WRITE, ee_addr);
ee_value |= (SEE_MS + SEE_CS);
for(i = 0x8000; i != 0; i>>=1) {
if (i & ee_data)
ee_value |= SEE_DO;
else
ee_value &= ~SEE_DO;
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
ee_value |= SEE_CLK; /* Clock data! */
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
ee_value &= ~SEE_CLK;
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
}
ee_value &= (EXT_ARB_ACK | SCSI_TERM_ENA_H);
WR_HARPOON(p_port+hp_ee_ctrl, (ee_value | SEE_MS));
FPT_Wait(p_port, TO_10ms);
WR_HARPOON(p_port+hp_ee_ctrl, (ee_value | SEE_MS | SEE_CS)); /* Set CS to EEPROM */
WR_HARPOON(p_port+hp_ee_ctrl, (ee_value | SEE_MS)); /* Turn off CS */
WR_HARPOON(p_port+hp_ee_ctrl, ee_value); /* Turn off Master Select */
}
/*---------------------------------------------------------------------
*
* Function: Read EEPROM
*
* Description: Read a word from the EEPROM at the desired
* address.
*
*---------------------------------------------------------------------*/
static USHORT FPT_utilEERead(ULONG p_port, USHORT ee_addr)
{
USHORT i, ee_data1, ee_data2;
i = 0;
ee_data1 = FPT_utilEEReadOrg(p_port, ee_addr);
do
{
ee_data2 = FPT_utilEEReadOrg(p_port, ee_addr);
if(ee_data1 == ee_data2)
return(ee_data1);
ee_data1 = ee_data2;
i++;
}while(i < 4);
return(ee_data1);
}
/*---------------------------------------------------------------------
*
* Function: Read EEPROM Original
*
* Description: Read a word from the EEPROM at the desired
* address.
*
*---------------------------------------------------------------------*/
static USHORT FPT_utilEEReadOrg(ULONG p_port, USHORT ee_addr)
{
UCHAR ee_value;
USHORT i, ee_data;
ee_value = (UCHAR)((RD_HARPOON(p_port+hp_ee_ctrl) & (EXT_ARB_ACK | SCSI_TERM_ENA_H))|
(SEE_MS | SEE_CS));
FPT_utilEESendCmdAddr(p_port, EE_READ, ee_addr);
ee_value |= (SEE_MS + SEE_CS);
ee_data = 0;
for(i = 1; i <= 16; i++) {
ee_value |= SEE_CLK; /* Clock data! */
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
ee_value &= ~SEE_CLK;
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
ee_data <<= 1;
if (RD_HARPOON(p_port+hp_ee_ctrl) & SEE_DI)
ee_data |= 1;
}
ee_value &= ~(SEE_MS + SEE_CS);
WR_HARPOON(p_port+hp_ee_ctrl, (ee_value | SEE_MS)); /*Turn off CS */
WR_HARPOON(p_port+hp_ee_ctrl, ee_value); /*Turn off Master Select */
return(ee_data);
}
/*---------------------------------------------------------------------
*
* Function: Send EE command and Address to the EEPROM
*
* Description: Transfers the correct command and sends the address
* to the eeprom.
*
*---------------------------------------------------------------------*/
static void FPT_utilEESendCmdAddr(ULONG p_port, UCHAR ee_cmd, USHORT ee_addr)
{
UCHAR ee_value;
UCHAR narrow_flg;
USHORT i;
narrow_flg= (UCHAR)(RD_HARPOON(p_port+hp_page_ctrl) & NARROW_SCSI_CARD);
ee_value = SEE_MS;
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
ee_value |= SEE_CS; /* Set CS to EEPROM */
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
for(i = 0x04; i != 0; i>>=1) {
if (i & ee_cmd)
ee_value |= SEE_DO;
else
ee_value &= ~SEE_DO;
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
ee_value |= SEE_CLK; /* Clock data! */
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
ee_value &= ~SEE_CLK;
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
}
if (narrow_flg)
i = 0x0080;
else
i = 0x0200;
while (i != 0) {
if (i & ee_addr)
ee_value |= SEE_DO;
else
ee_value &= ~SEE_DO;
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
ee_value |= SEE_CLK; /* Clock data! */
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
ee_value &= ~SEE_CLK;
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
WR_HARPOON(p_port+hp_ee_ctrl, ee_value);
i >>= 1;
}
}
static USHORT FPT_CalcCrc16(UCHAR buffer[])
{
USHORT crc=0;
int i,j;
USHORT ch;
for (i=0; i < ID_STRING_LENGTH; i++)
{
ch = (USHORT) buffer[i];
for(j=0; j < 8; j++)
{
if ((crc ^ ch) & 1)
crc = (crc >> 1) ^ CRCMASK;
else
crc >>= 1;
ch >>= 1;
}
}
return(crc);
}
static UCHAR FPT_CalcLrc(UCHAR buffer[])
{
int i;
UCHAR lrc;
lrc = 0;
for(i = 0; i < ID_STRING_LENGTH; i++)
lrc ^= buffer[i];
return(lrc);
}
/*
The following inline definitions avoid type conflicts.
*/
static inline unsigned char
FlashPoint__ProbeHostAdapter(struct FlashPoint_Info *FlashPointInfo)
{
return FlashPoint_ProbeHostAdapter((PSCCBMGR_INFO) FlashPointInfo);
}
static inline FlashPoint_CardHandle_T
FlashPoint__HardwareResetHostAdapter(struct FlashPoint_Info *FlashPointInfo)
{
return FlashPoint_HardwareResetHostAdapter((PSCCBMGR_INFO) FlashPointInfo);
}
static inline void
FlashPoint__ReleaseHostAdapter(FlashPoint_CardHandle_T CardHandle)
{
FlashPoint_ReleaseHostAdapter(CardHandle);
}
static inline void
FlashPoint__StartCCB(FlashPoint_CardHandle_T CardHandle, struct BusLogic_CCB *CCB)
{
FlashPoint_StartCCB(CardHandle, (PSCCB) CCB);
}
static inline void
FlashPoint__AbortCCB(FlashPoint_CardHandle_T CardHandle, struct BusLogic_CCB *CCB)
{
FlashPoint_AbortCCB(CardHandle, (PSCCB) CCB);
}
static inline boolean
FlashPoint__InterruptPending(FlashPoint_CardHandle_T CardHandle)
{
return FlashPoint_InterruptPending(CardHandle);
}
static inline int
FlashPoint__HandleInterrupt(FlashPoint_CardHandle_T CardHandle)
{
return FlashPoint_HandleInterrupt(CardHandle);
}
#define FlashPoint_ProbeHostAdapter FlashPoint__ProbeHostAdapter
#define FlashPoint_HardwareResetHostAdapter FlashPoint__HardwareResetHostAdapter
#define FlashPoint_ReleaseHostAdapter FlashPoint__ReleaseHostAdapter
#define FlashPoint_StartCCB FlashPoint__StartCCB
#define FlashPoint_AbortCCB FlashPoint__AbortCCB
#define FlashPoint_InterruptPending FlashPoint__InterruptPending
#define FlashPoint_HandleInterrupt FlashPoint__HandleInterrupt
#else /* CONFIG_SCSI_OMIT_FLASHPOINT */
/*
Define prototypes for the FlashPoint SCCB Manager Functions.
*/
extern unsigned char FlashPoint_ProbeHostAdapter(struct FlashPoint_Info *);
extern FlashPoint_CardHandle_T
FlashPoint_HardwareResetHostAdapter(struct FlashPoint_Info *);
extern void FlashPoint_StartCCB(FlashPoint_CardHandle_T, struct BusLogic_CCB *);
extern int FlashPoint_AbortCCB(FlashPoint_CardHandle_T, struct BusLogic_CCB *);
extern boolean FlashPoint_InterruptPending(FlashPoint_CardHandle_T);
extern int FlashPoint_HandleInterrupt(FlashPoint_CardHandle_T);
extern void FlashPoint_ReleaseHostAdapter(FlashPoint_CardHandle_T);
#endif /* CONFIG_SCSI_OMIT_FLASHPOINT */