android_kernel_motorola_sm6225/arch/x86/kernel/mfgpt_32.c
Jens Rottmann 0d5cdc97e2 x86, geode-mfgpt: check IRQ before using MFGPT as clocksource
Adds a simple IRQ autodetection to the AMD Geode MFGPT driver, and more
importantly, adds some checks, if IRQs can actually be received on the
chosen line.  This fixes cases where MFGPT is selected as clocksource
though not producing any ticks, so the kernel simply starves during
boot.

Signed-off-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de>
Cc: Andres Salomon <dilinger@debian.org>
Cc: linux-geode@bombadil.infradead.org
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-15 17:12:32 +02:00

411 lines
10 KiB
C

/*
* Driver/API for AMD Geode Multi-Function General Purpose Timers (MFGPT)
*
* Copyright (C) 2006, Advanced Micro Devices, Inc.
* Copyright (C) 2007, Andres Salomon <dilinger@debian.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public License
* as published by the Free Software Foundation.
*
* The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book.
*/
/*
* We are using the 32.768kHz input clock - it's the only one that has the
* ranges we find desirable. The following table lists the suitable
* divisors and the associated Hz, minimum interval and the maximum interval:
*
* Divisor Hz Min Delta (s) Max Delta (s)
* 1 32768 .00048828125 2.000
* 2 16384 .0009765625 4.000
* 4 8192 .001953125 8.000
* 8 4096 .00390625 16.000
* 16 2048 .0078125 32.000
* 32 1024 .015625 64.000
* 64 512 .03125 128.000
* 128 256 .0625 256.000
* 256 128 .125 512.000
*/
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/geode.h>
#define MFGPT_DEFAULT_IRQ 7
static struct mfgpt_timer_t {
unsigned int avail:1;
} mfgpt_timers[MFGPT_MAX_TIMERS];
/* Selected from the table above */
#define MFGPT_DIVISOR 16
#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
#define MFGPT_HZ (32768 / MFGPT_DIVISOR)
#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
/* Allow for disabling of MFGPTs */
static int disable;
static int __init mfgpt_disable(char *s)
{
disable = 1;
return 1;
}
__setup("nomfgpt", mfgpt_disable);
/* Reset the MFGPT timers. This is required by some broken BIOSes which already
* do the same and leave the system in an unstable state. TinyBIOS 0.98 is
* affected at least (0.99 is OK with MFGPT workaround left to off).
*/
static int __init mfgpt_fix(char *s)
{
u32 val, dummy;
/* The following udocumented bit resets the MFGPT timers */
val = 0xFF; dummy = 0;
wrmsr(MSR_MFGPT_SETUP, val, dummy);
return 1;
}
__setup("mfgptfix", mfgpt_fix);
/*
* Check whether any MFGPTs are available for the kernel to use. In most
* cases, firmware that uses AMD's VSA code will claim all timers during
* bootup; we certainly don't want to take them if they're already in use.
* In other cases (such as with VSAless OpenFirmware), the system firmware
* leaves timers available for us to use.
*/
static int timers = -1;
static void geode_mfgpt_detect(void)
{
int i;
u16 val;
timers = 0;
if (disable) {
printk(KERN_INFO "geode-mfgpt: MFGPT support is disabled\n");
goto done;
}
if (!geode_get_dev_base(GEODE_DEV_MFGPT)) {
printk(KERN_INFO "geode-mfgpt: MFGPT LBAR is not set up\n");
goto done;
}
for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
val = geode_mfgpt_read(i, MFGPT_REG_SETUP);
if (!(val & MFGPT_SETUP_SETUP)) {
mfgpt_timers[i].avail = 1;
timers++;
}
}
done:
printk(KERN_INFO "geode-mfgpt: %d MFGPT timers available.\n", timers);
}
int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable)
{
u32 msr, mask, value, dummy;
int shift = (cmp == MFGPT_CMP1) ? 0 : 8;
if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
return -EIO;
/*
* The register maps for these are described in sections 6.17.1.x of
* the AMD Geode CS5536 Companion Device Data Book.
*/
switch (event) {
case MFGPT_EVENT_RESET:
/*
* XXX: According to the docs, we cannot reset timers above
* 6; that is, resets for 7 and 8 will be ignored. Is this
* a problem? -dilinger
*/
msr = MSR_MFGPT_NR;
mask = 1 << (timer + 24);
break;
case MFGPT_EVENT_NMI:
msr = MSR_MFGPT_NR;
mask = 1 << (timer + shift);
break;
case MFGPT_EVENT_IRQ:
msr = MSR_MFGPT_IRQ;
mask = 1 << (timer + shift);
break;
default:
return -EIO;
}
rdmsr(msr, value, dummy);
if (enable)
value |= mask;
else
value &= ~mask;
wrmsr(msr, value, dummy);
return 0;
}
EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable)
{
u32 zsel, lpc, dummy;
int shift;
if (timer < 0 || timer >= MFGPT_MAX_TIMERS)
return -EIO;
/*
* Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA
* is using the same CMP of the timer's Siamese twin, the IRQ is set to
* 2, and we mustn't use nor change it.
* XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the
* IRQ of the 1st. This can only happen if forcing an IRQ, calling this
* with *irq==0 is safe. Currently there _are_ no 2 drivers.
*/
rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4;
if (((zsel >> shift) & 0xF) == 2)
return -EIO;
/* Choose IRQ: if none supplied, keep IRQ already set or use default */
if (!*irq)
*irq = (zsel >> shift) & 0xF;
if (!*irq)
*irq = MFGPT_DEFAULT_IRQ;
/* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */
if (*irq < 1 || *irq == 2 || *irq > 15)
return -EIO;
rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy);
if (lpc & (1 << *irq))
return -EIO;
/* All chosen and checked - go for it */
if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable))
return -EIO;
if (enable) {
zsel = (zsel & ~(0xF << shift)) | (*irq << shift);
wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy);
}
return 0;
}
static int mfgpt_get(int timer)
{
mfgpt_timers[timer].avail = 0;
printk(KERN_INFO "geode-mfgpt: Registered timer %d\n", timer);
return timer;
}
int geode_mfgpt_alloc_timer(int timer, int domain)
{
int i;
if (timers == -1) {
/* timers haven't been detected yet */
geode_mfgpt_detect();
}
if (!timers)
return -1;
if (timer >= MFGPT_MAX_TIMERS)
return -1;
if (timer < 0) {
/* Try to find an available timer */
for (i = 0; i < MFGPT_MAX_TIMERS; i++) {
if (mfgpt_timers[i].avail)
return mfgpt_get(i);
if (i == 5 && domain == MFGPT_DOMAIN_WORKING)
break;
}
} else {
/* If they requested a specific timer, try to honor that */
if (mfgpt_timers[timer].avail)
return mfgpt_get(timer);
}
/* No timers available - too bad */
return -1;
}
EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
#ifdef CONFIG_GEODE_MFGPT_TIMER
/*
* The MFPGT timers on the CS5536 provide us with suitable timers to use
* as clock event sources - not as good as a HPET or APIC, but certainly
* better then the PIT. This isn't a general purpose MFGPT driver, but
* a simplified one designed specifically to act as a clock event source.
* For full details about the MFGPT, please consult the CS5536 data sheet.
*/
#include <linux/clocksource.h>
#include <linux/clockchips.h>
static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN;
static u16 mfgpt_event_clock;
static int irq;
static int __init mfgpt_setup(char *str)
{
get_option(&str, &irq);
return 1;
}
__setup("mfgpt_irq=", mfgpt_setup);
static void mfgpt_disable_timer(u16 clock)
{
/* avoid races by clearing CMP1 and CMP2 unconditionally */
geode_mfgpt_write(clock, MFGPT_REG_SETUP, (u16) ~MFGPT_SETUP_CNTEN |
MFGPT_SETUP_CMP1 | MFGPT_SETUP_CMP2);
}
static int mfgpt_next_event(unsigned long, struct clock_event_device *);
static void mfgpt_set_mode(enum clock_event_mode, struct clock_event_device *);
static struct clock_event_device mfgpt_clockevent = {
.name = "mfgpt-timer",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = mfgpt_set_mode,
.set_next_event = mfgpt_next_event,
.rating = 250,
.cpumask = CPU_MASK_ALL,
.shift = 32
};
static void mfgpt_start_timer(u16 delta)
{
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_CMP2, (u16) delta);
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
}
static void mfgpt_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
mfgpt_disable_timer(mfgpt_event_clock);
if (mode == CLOCK_EVT_MODE_PERIODIC)
mfgpt_start_timer(MFGPT_PERIODIC);
mfgpt_tick_mode = mode;
}
static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
{
mfgpt_start_timer(delta);
return 0;
}
static irqreturn_t mfgpt_tick(int irq, void *dev_id)
{
u16 val = geode_mfgpt_read(mfgpt_event_clock, MFGPT_REG_SETUP);
/* See if the interrupt was for us */
if (!(val & (MFGPT_SETUP_SETUP | MFGPT_SETUP_CMP2 | MFGPT_SETUP_CMP1)))
return IRQ_NONE;
/* Turn off the clock (and clear the event) */
mfgpt_disable_timer(mfgpt_event_clock);
if (mfgpt_tick_mode == CLOCK_EVT_MODE_SHUTDOWN)
return IRQ_HANDLED;
/* Clear the counter */
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_COUNTER, 0);
/* Restart the clock in periodic mode */
if (mfgpt_tick_mode == CLOCK_EVT_MODE_PERIODIC) {
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP,
MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
}
mfgpt_clockevent.event_handler(&mfgpt_clockevent);
return IRQ_HANDLED;
}
static struct irqaction mfgptirq = {
.handler = mfgpt_tick,
.flags = IRQF_DISABLED | IRQF_NOBALANCING,
.mask = CPU_MASK_NONE,
.name = "mfgpt-timer"
};
int __init mfgpt_timer_setup(void)
{
int timer, ret;
u16 val;
timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
if (timer < 0) {
printk(KERN_ERR
"mfgpt-timer: Could not allocate a MFPGT timer\n");
return -ENODEV;
}
mfgpt_event_clock = timer;
/* Set up the IRQ on the MFGPT side */
if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) {
printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq);
return -EIO;
}
/* And register it with the kernel */
ret = setup_irq(irq, &mfgptirq);
if (ret) {
printk(KERN_ERR
"mfgpt-timer: Unable to set up the interrupt.\n");
goto err;
}
/* Set the clock scale and enable the event mode for CMP2 */
val = MFGPT_SCALE | (3 << 8);
geode_mfgpt_write(mfgpt_event_clock, MFGPT_REG_SETUP, val);
/* Set up the clock event */
mfgpt_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
mfgpt_clockevent.shift);
mfgpt_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
&mfgpt_clockevent);
mfgpt_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
&mfgpt_clockevent);
printk(KERN_INFO
"mfgpt-timer: Registering MFGPT timer %d as a clock event, using IRQ %d\n",
timer, irq);
clockevents_register_device(&mfgpt_clockevent);
return 0;
err:
geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq);
printk(KERN_ERR
"mfgpt-timer: Unable to set up the MFGPT clock source\n");
return -EIO;
}
#endif