android_kernel_motorola_sm6225/include/scsi/scsi_cmnd.h
Boaz Harrosh db4742dd8f [SCSI] add support for variable length extended commands
Add support for variable-length, extended, and vendor specific
CDBs to scsi-ml. It is now possible for initiators and ULD's
to issue these types of commands. LLDs need not change much.
All they need is to raise the .max_cmd_len to the longest command
they support (see iscsi patch).

- clean-up some code paths that did not expect commands to be
  larger than 16, and change cmd_len members' type to short as
  char is not enough.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-05-02 11:33:25 -05:00

212 lines
6.2 KiB
C

#ifndef _SCSI_SCSI_CMND_H
#define _SCSI_SCSI_CMND_H
#include <linux/dma-mapping.h>
#include <linux/blkdev.h>
#include <linux/list.h>
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
struct Scsi_Host;
struct scsi_device;
/*
* MAX_COMMAND_SIZE is:
* The longest fixed-length SCSI CDB as per the SCSI standard.
* fixed-length means: commands that their size can be determined
* by their opcode and the CDB does not carry a length specifier, (unlike
* the VARIABLE_LENGTH_CMD(0x7f) command). This is actually not exactly
* true and the SCSI standard also defines extended commands and
* vendor specific commands that can be bigger than 16 bytes. The kernel
* will support these using the same infrastructure used for VARLEN CDB's.
* So in effect MAX_COMMAND_SIZE means the maximum size command scsi-ml
* supports without specifying a cmd_len by ULD's
*/
#define MAX_COMMAND_SIZE 16
#if (MAX_COMMAND_SIZE > BLK_MAX_CDB)
# error MAX_COMMAND_SIZE can not be bigger than BLK_MAX_CDB
#endif
struct scsi_data_buffer {
struct sg_table table;
unsigned length;
int resid;
};
/* embedded in scsi_cmnd */
struct scsi_pointer {
char *ptr; /* data pointer */
int this_residual; /* left in this buffer */
struct scatterlist *buffer; /* which buffer */
int buffers_residual; /* how many buffers left */
dma_addr_t dma_handle;
volatile int Status;
volatile int Message;
volatile int have_data_in;
volatile int sent_command;
volatile int phase;
};
struct scsi_cmnd {
struct scsi_device *device;
struct list_head list; /* scsi_cmnd participates in queue lists */
struct list_head eh_entry; /* entry for the host eh_cmd_q */
int eh_eflags; /* Used by error handlr */
/*
* A SCSI Command is assigned a nonzero serial_number before passed
* to the driver's queue command function. The serial_number is
* cleared when scsi_done is entered indicating that the command
* has been completed. It is a bug for LLDDs to use this number
* for purposes other than printk (and even that is only useful
* for debugging).
*/
unsigned long serial_number;
/*
* This is set to jiffies as it was when the command was first
* allocated. It is used to time how long the command has
* been outstanding
*/
unsigned long jiffies_at_alloc;
int retries;
int allowed;
int timeout_per_command;
unsigned short cmd_len;
enum dma_data_direction sc_data_direction;
/* These elements define the operation we are about to perform */
unsigned char *cmnd;
struct timer_list eh_timeout; /* Used to time out the command. */
/* These elements define the operation we ultimately want to perform */
struct scsi_data_buffer sdb;
unsigned underflow; /* Return error if less than
this amount is transferred */
unsigned transfersize; /* How much we are guaranteed to
transfer with each SCSI transfer
(ie, between disconnect /
reconnects. Probably == sector
size */
struct request *request; /* The command we are
working on */
#define SCSI_SENSE_BUFFERSIZE 96
unsigned char *sense_buffer;
/* obtained by REQUEST SENSE when
* CHECK CONDITION is received on original
* command (auto-sense) */
/* Low-level done function - can be used by low-level driver to point
* to completion function. Not used by mid/upper level code. */
void (*scsi_done) (struct scsi_cmnd *);
/*
* The following fields can be written to by the host specific code.
* Everything else should be left alone.
*/
struct scsi_pointer SCp; /* Scratchpad used by some host adapters */
unsigned char *host_scribble; /* The host adapter is allowed to
* call scsi_malloc and get some memory
* and hang it here. The host adapter
* is also expected to call scsi_free
* to release this memory. (The memory
* obtained by scsi_malloc is guaranteed
* to be at an address < 16Mb). */
int result; /* Status code from lower level driver */
unsigned char tag; /* SCSI-II queued command tag */
};
extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
extern struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *, gfp_t);
extern void scsi_put_command(struct scsi_cmnd *);
extern void __scsi_put_command(struct Scsi_Host *, struct scsi_cmnd *,
struct device *);
extern void scsi_finish_command(struct scsi_cmnd *cmd);
extern void scsi_req_abort_cmd(struct scsi_cmnd *cmd);
extern void *scsi_kmap_atomic_sg(struct scatterlist *sg, int sg_count,
size_t *offset, size_t *len);
extern void scsi_kunmap_atomic_sg(void *virt);
extern int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask);
extern void scsi_release_buffers(struct scsi_cmnd *cmd);
extern int scsi_dma_map(struct scsi_cmnd *cmd);
extern void scsi_dma_unmap(struct scsi_cmnd *cmd);
struct scsi_cmnd *scsi_allocate_command(gfp_t gfp_mask);
void scsi_free_command(gfp_t gfp_mask, struct scsi_cmnd *cmd);
static inline unsigned scsi_sg_count(struct scsi_cmnd *cmd)
{
return cmd->sdb.table.nents;
}
static inline struct scatterlist *scsi_sglist(struct scsi_cmnd *cmd)
{
return cmd->sdb.table.sgl;
}
static inline unsigned scsi_bufflen(struct scsi_cmnd *cmd)
{
return cmd->sdb.length;
}
static inline void scsi_set_resid(struct scsi_cmnd *cmd, int resid)
{
cmd->sdb.resid = resid;
}
static inline int scsi_get_resid(struct scsi_cmnd *cmd)
{
return cmd->sdb.resid;
}
#define scsi_for_each_sg(cmd, sg, nseg, __i) \
for_each_sg(scsi_sglist(cmd), sg, nseg, __i)
static inline int scsi_bidi_cmnd(struct scsi_cmnd *cmd)
{
return blk_bidi_rq(cmd->request) &&
(cmd->request->next_rq->special != NULL);
}
static inline struct scsi_data_buffer *scsi_in(struct scsi_cmnd *cmd)
{
return scsi_bidi_cmnd(cmd) ?
cmd->request->next_rq->special : &cmd->sdb;
}
static inline struct scsi_data_buffer *scsi_out(struct scsi_cmnd *cmd)
{
return &cmd->sdb;
}
static inline int scsi_sg_copy_from_buffer(struct scsi_cmnd *cmd,
void *buf, int buflen)
{
return sg_copy_from_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
buf, buflen);
}
static inline int scsi_sg_copy_to_buffer(struct scsi_cmnd *cmd,
void *buf, int buflen)
{
return sg_copy_to_buffer(scsi_sglist(cmd), scsi_sg_count(cmd),
buf, buflen);
}
#endif /* _SCSI_SCSI_CMND_H */