dea74869f3
The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
550 lines
14 KiB
C
550 lines
14 KiB
C
/*
|
|
Driver for VES1893 and VES1993 QPSK Demodulators
|
|
|
|
Copyright (C) 1999 Convergence Integrated Media GmbH <ralph@convergence.de>
|
|
Copyright (C) 2001 Ronny Strutz <3des@elitedvb.de>
|
|
Copyright (C) 2002 Dennis Noermann <dennis.noermann@noernet.de>
|
|
Copyright (C) 2002-2003 Andreas Oberritter <obi@linuxtv.org>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "ves1x93.h"
|
|
|
|
|
|
struct ves1x93_state {
|
|
struct i2c_adapter* i2c;
|
|
/* configuration settings */
|
|
const struct ves1x93_config* config;
|
|
struct dvb_frontend frontend;
|
|
|
|
/* previous uncorrected block counter */
|
|
fe_spectral_inversion_t inversion;
|
|
u8 *init_1x93_tab;
|
|
u8 *init_1x93_wtab;
|
|
u8 tab_size;
|
|
u8 demod_type;
|
|
};
|
|
|
|
static int debug = 0;
|
|
#define dprintk if (debug) printk
|
|
|
|
#define DEMOD_VES1893 0
|
|
#define DEMOD_VES1993 1
|
|
|
|
static u8 init_1893_tab [] = {
|
|
0x01, 0xa4, 0x35, 0x80, 0x2a, 0x0b, 0x55, 0xc4,
|
|
0x09, 0x69, 0x00, 0x86, 0x4c, 0x28, 0x7f, 0x00,
|
|
0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x80, 0x00, 0x21, 0xb0, 0x14, 0x00, 0xdc, 0x00,
|
|
0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x55, 0x00, 0x00, 0x7f, 0x00
|
|
};
|
|
|
|
static u8 init_1993_tab [] = {
|
|
0x00, 0x9c, 0x35, 0x80, 0x6a, 0x09, 0x72, 0x8c,
|
|
0x09, 0x6b, 0x00, 0x00, 0x4c, 0x08, 0x00, 0x00,
|
|
0x00, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x80, 0x40, 0x21, 0xb0, 0x00, 0x00, 0x00, 0x10,
|
|
0x81, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x55, 0x03, 0x00, 0x00, 0x00, 0x00, 0x03,
|
|
0x00, 0x00, 0x0e, 0x80, 0x00
|
|
};
|
|
|
|
static u8 init_1893_wtab[] =
|
|
{
|
|
1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
|
|
0,1,0,0,0,0,0,0, 1,0,1,1,0,0,0,1,
|
|
1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
|
|
1,1,1,0,1,1
|
|
};
|
|
|
|
static u8 init_1993_wtab[] =
|
|
{
|
|
1,1,1,1,1,1,1,1, 1,1,0,0,1,1,0,0,
|
|
0,1,0,0,0,0,0,0, 1,1,1,1,0,0,0,1,
|
|
1,1,1,0,0,0,0,0, 0,0,1,1,0,0,0,0,
|
|
1,1,1,0,1,1,1,1, 1,1,1,1,1
|
|
};
|
|
|
|
static int ves1x93_writereg (struct ves1x93_state* state, u8 reg, u8 data)
|
|
{
|
|
u8 buf [] = { 0x00, reg, data };
|
|
struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 3 };
|
|
int err;
|
|
|
|
if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
|
|
dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 ves1x93_readreg (struct ves1x93_state* state, u8 reg)
|
|
{
|
|
int ret;
|
|
u8 b0 [] = { 0x00, reg };
|
|
u8 b1 [] = { 0 };
|
|
struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
|
|
{ .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 } };
|
|
|
|
ret = i2c_transfer (state->i2c, msg, 2);
|
|
|
|
if (ret != 2) return ret;
|
|
|
|
return b1[0];
|
|
}
|
|
|
|
static int ves1x93_clr_bit (struct ves1x93_state* state)
|
|
{
|
|
msleep(10);
|
|
ves1x93_writereg (state, 0, state->init_1x93_tab[0] & 0xfe);
|
|
ves1x93_writereg (state, 0, state->init_1x93_tab[0]);
|
|
msleep(50);
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_set_inversion (struct ves1x93_state* state, fe_spectral_inversion_t inversion)
|
|
{
|
|
u8 val;
|
|
|
|
/*
|
|
* inversion on/off are interchanged because i and q seem to
|
|
* be swapped on the hardware
|
|
*/
|
|
|
|
switch (inversion) {
|
|
case INVERSION_OFF:
|
|
val = 0xc0;
|
|
break;
|
|
case INVERSION_ON:
|
|
val = 0x80;
|
|
break;
|
|
case INVERSION_AUTO:
|
|
val = 0x00;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return ves1x93_writereg (state, 0x0c, (state->init_1x93_tab[0x0c] & 0x3f) | val);
|
|
}
|
|
|
|
static int ves1x93_set_fec (struct ves1x93_state* state, fe_code_rate_t fec)
|
|
{
|
|
if (fec == FEC_AUTO)
|
|
return ves1x93_writereg (state, 0x0d, 0x08);
|
|
else if (fec < FEC_1_2 || fec > FEC_8_9)
|
|
return -EINVAL;
|
|
else
|
|
return ves1x93_writereg (state, 0x0d, fec - FEC_1_2);
|
|
}
|
|
|
|
static fe_code_rate_t ves1x93_get_fec (struct ves1x93_state* state)
|
|
{
|
|
return FEC_1_2 + ((ves1x93_readreg (state, 0x0d) >> 4) & 0x7);
|
|
}
|
|
|
|
static int ves1x93_set_symbolrate (struct ves1x93_state* state, u32 srate)
|
|
{
|
|
u32 BDR;
|
|
u32 ratio;
|
|
u8 ADCONF, FCONF, FNR, AGCR;
|
|
u32 BDRI;
|
|
u32 tmp;
|
|
u32 FIN;
|
|
|
|
dprintk("%s: srate == %d\n", __FUNCTION__, (unsigned int) srate);
|
|
|
|
if (srate > state->config->xin/2)
|
|
srate = state->config->xin/2;
|
|
|
|
if (srate < 500000)
|
|
srate = 500000;
|
|
|
|
#define MUL (1UL<<26)
|
|
|
|
FIN = (state->config->xin + 6000) >> 4;
|
|
|
|
tmp = srate << 6;
|
|
ratio = tmp / FIN;
|
|
|
|
tmp = (tmp % FIN) << 8;
|
|
ratio = (ratio << 8) + tmp / FIN;
|
|
|
|
tmp = (tmp % FIN) << 8;
|
|
ratio = (ratio << 8) + tmp / FIN;
|
|
|
|
FNR = 0xff;
|
|
|
|
if (ratio < MUL/3) FNR = 0;
|
|
if (ratio < (MUL*11)/50) FNR = 1;
|
|
if (ratio < MUL/6) FNR = 2;
|
|
if (ratio < MUL/9) FNR = 3;
|
|
if (ratio < MUL/12) FNR = 4;
|
|
if (ratio < (MUL*11)/200) FNR = 5;
|
|
if (ratio < MUL/24) FNR = 6;
|
|
if (ratio < (MUL*27)/1000) FNR = 7;
|
|
if (ratio < MUL/48) FNR = 8;
|
|
if (ratio < (MUL*137)/10000) FNR = 9;
|
|
|
|
if (FNR == 0xff) {
|
|
ADCONF = 0x89;
|
|
FCONF = 0x80;
|
|
FNR = 0;
|
|
} else {
|
|
ADCONF = 0x81;
|
|
FCONF = 0x88 | (FNR >> 1) | ((FNR & 0x01) << 5);
|
|
/*FCONF = 0x80 | ((FNR & 0x01) << 5) | (((FNR > 1) & 0x03) << 3) | ((FNR >> 1) & 0x07);*/
|
|
}
|
|
|
|
BDR = (( (ratio << (FNR >> 1)) >> 4) + 1) >> 1;
|
|
BDRI = ( ((FIN << 8) / ((srate << (FNR >> 1)) >> 2)) + 1) >> 1;
|
|
|
|
dprintk("FNR= %d\n", FNR);
|
|
dprintk("ratio= %08x\n", (unsigned int) ratio);
|
|
dprintk("BDR= %08x\n", (unsigned int) BDR);
|
|
dprintk("BDRI= %02x\n", (unsigned int) BDRI);
|
|
|
|
if (BDRI > 0xff)
|
|
BDRI = 0xff;
|
|
|
|
ves1x93_writereg (state, 0x06, 0xff & BDR);
|
|
ves1x93_writereg (state, 0x07, 0xff & (BDR >> 8));
|
|
ves1x93_writereg (state, 0x08, 0x0f & (BDR >> 16));
|
|
|
|
ves1x93_writereg (state, 0x09, BDRI);
|
|
ves1x93_writereg (state, 0x20, ADCONF);
|
|
ves1x93_writereg (state, 0x21, FCONF);
|
|
|
|
AGCR = state->init_1x93_tab[0x05];
|
|
if (state->config->invert_pwm)
|
|
AGCR |= 0x20;
|
|
|
|
if (srate < 6000000)
|
|
AGCR |= 0x80;
|
|
else
|
|
AGCR &= ~0x80;
|
|
|
|
ves1x93_writereg (state, 0x05, AGCR);
|
|
|
|
/* ves1993 hates this, will lose lock */
|
|
if (state->demod_type != DEMOD_VES1993)
|
|
ves1x93_clr_bit (state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_init (struct dvb_frontend* fe)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
int i;
|
|
int val;
|
|
|
|
dprintk("%s: init chip\n", __FUNCTION__);
|
|
|
|
for (i = 0; i < state->tab_size; i++) {
|
|
if (state->init_1x93_wtab[i]) {
|
|
val = state->init_1x93_tab[i];
|
|
|
|
if (state->config->invert_pwm && (i == 0x05)) val |= 0x20; /* invert PWM */
|
|
ves1x93_writereg (state, i, val);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
switch (voltage) {
|
|
case SEC_VOLTAGE_13:
|
|
return ves1x93_writereg (state, 0x1f, 0x20);
|
|
case SEC_VOLTAGE_18:
|
|
return ves1x93_writereg (state, 0x1f, 0x30);
|
|
case SEC_VOLTAGE_OFF:
|
|
return ves1x93_writereg (state, 0x1f, 0x00);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int ves1x93_read_status(struct dvb_frontend* fe, fe_status_t* status)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
u8 sync = ves1x93_readreg (state, 0x0e);
|
|
|
|
/*
|
|
* The ves1893 sometimes returns sync values that make no sense,
|
|
* because, e.g., the SIGNAL bit is 0, while some of the higher
|
|
* bits are 1 (and how can there be a CARRIER w/o a SIGNAL?).
|
|
* Tests showed that the the VITERBI and SYNC bits are returned
|
|
* reliably, while the SIGNAL and CARRIER bits ar sometimes wrong.
|
|
* If such a case occurs, we read the value again, until we get a
|
|
* valid value.
|
|
*/
|
|
int maxtry = 10; /* just for safety - let's not get stuck here */
|
|
while ((sync & 0x03) != 0x03 && (sync & 0x0c) && maxtry--) {
|
|
msleep(10);
|
|
sync = ves1x93_readreg (state, 0x0e);
|
|
}
|
|
|
|
*status = 0;
|
|
|
|
if (sync & 1)
|
|
*status |= FE_HAS_SIGNAL;
|
|
|
|
if (sync & 2)
|
|
*status |= FE_HAS_CARRIER;
|
|
|
|
if (sync & 4)
|
|
*status |= FE_HAS_VITERBI;
|
|
|
|
if (sync & 8)
|
|
*status |= FE_HAS_SYNC;
|
|
|
|
if ((sync & 0x1f) == 0x1f)
|
|
*status |= FE_HAS_LOCK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_read_ber(struct dvb_frontend* fe, u32* ber)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
*ber = ves1x93_readreg (state, 0x15);
|
|
*ber |= (ves1x93_readreg (state, 0x16) << 8);
|
|
*ber |= ((ves1x93_readreg (state, 0x17) & 0x0F) << 16);
|
|
*ber *= 10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_read_signal_strength(struct dvb_frontend* fe, u16* strength)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
u8 signal = ~ves1x93_readreg (state, 0x0b);
|
|
*strength = (signal << 8) | signal;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_read_snr(struct dvb_frontend* fe, u16* snr)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
u8 _snr = ~ves1x93_readreg (state, 0x1c);
|
|
*snr = (_snr << 8) | _snr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
*ucblocks = ves1x93_readreg (state, 0x18) & 0x7f;
|
|
|
|
if (*ucblocks == 0x7f)
|
|
*ucblocks = 0xffffffff; /* counter overflow... */
|
|
|
|
ves1x93_writereg (state, 0x18, 0x00); /* reset the counter */
|
|
ves1x93_writereg (state, 0x18, 0x80); /* dto. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe, p);
|
|
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
ves1x93_set_inversion (state, p->inversion);
|
|
ves1x93_set_fec (state, p->u.qpsk.fec_inner);
|
|
ves1x93_set_symbolrate (state, p->u.qpsk.symbol_rate);
|
|
state->inversion = p->inversion;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
int afc;
|
|
|
|
afc = ((int)((char)(ves1x93_readreg (state, 0x0a) << 1)))/2;
|
|
afc = (afc * (int)(p->u.qpsk.symbol_rate/1000/8))/16;
|
|
|
|
p->frequency -= afc;
|
|
|
|
/*
|
|
* inversion indicator is only valid
|
|
* if auto inversion was used
|
|
*/
|
|
if (state->inversion == INVERSION_AUTO)
|
|
p->inversion = (ves1x93_readreg (state, 0x0f) & 2) ?
|
|
INVERSION_OFF : INVERSION_ON;
|
|
p->u.qpsk.fec_inner = ves1x93_get_fec (state);
|
|
/* XXX FIXME: timing offset !! */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ves1x93_sleep(struct dvb_frontend* fe)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
return ves1x93_writereg (state, 0x00, 0x08);
|
|
}
|
|
|
|
static void ves1x93_release(struct dvb_frontend* fe)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static int ves1x93_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
|
|
{
|
|
struct ves1x93_state* state = fe->demodulator_priv;
|
|
|
|
if (enable) {
|
|
return ves1x93_writereg(state, 0x00, 0x11);
|
|
} else {
|
|
return ves1x93_writereg(state, 0x00, 0x01);
|
|
}
|
|
}
|
|
|
|
static struct dvb_frontend_ops ves1x93_ops;
|
|
|
|
struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct ves1x93_state* state = NULL;
|
|
u8 identity;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kmalloc(sizeof(struct ves1x93_state), GFP_KERNEL);
|
|
if (state == NULL) goto error;
|
|
|
|
/* setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
state->inversion = INVERSION_OFF;
|
|
|
|
/* check if the demod is there + identify it */
|
|
identity = ves1x93_readreg(state, 0x1e);
|
|
switch (identity) {
|
|
case 0xdc: /* VES1893A rev1 */
|
|
printk("ves1x93: Detected ves1893a rev1\n");
|
|
state->demod_type = DEMOD_VES1893;
|
|
state->init_1x93_tab = init_1893_tab;
|
|
state->init_1x93_wtab = init_1893_wtab;
|
|
state->tab_size = sizeof(init_1893_tab);
|
|
break;
|
|
|
|
case 0xdd: /* VES1893A rev2 */
|
|
printk("ves1x93: Detected ves1893a rev2\n");
|
|
state->demod_type = DEMOD_VES1893;
|
|
state->init_1x93_tab = init_1893_tab;
|
|
state->init_1x93_wtab = init_1893_wtab;
|
|
state->tab_size = sizeof(init_1893_tab);
|
|
break;
|
|
|
|
case 0xde: /* VES1993 */
|
|
printk("ves1x93: Detected ves1993\n");
|
|
state->demod_type = DEMOD_VES1993;
|
|
state->init_1x93_tab = init_1993_tab;
|
|
state->init_1x93_wtab = init_1993_wtab;
|
|
state->tab_size = sizeof(init_1993_tab);
|
|
break;
|
|
|
|
default:
|
|
goto error;
|
|
}
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &ves1x93_ops, sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
static struct dvb_frontend_ops ves1x93_ops = {
|
|
|
|
.info = {
|
|
.name = "VLSI VES1x93 DVB-S",
|
|
.type = FE_QPSK,
|
|
.frequency_min = 950000,
|
|
.frequency_max = 2150000,
|
|
.frequency_stepsize = 125, /* kHz for QPSK frontends */
|
|
.frequency_tolerance = 29500,
|
|
.symbol_rate_min = 1000000,
|
|
.symbol_rate_max = 45000000,
|
|
/* .symbol_rate_tolerance = ???,*/
|
|
.caps = FE_CAN_INVERSION_AUTO |
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
|
|
FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
|
|
FE_CAN_QPSK
|
|
},
|
|
|
|
.release = ves1x93_release,
|
|
|
|
.init = ves1x93_init,
|
|
.sleep = ves1x93_sleep,
|
|
.i2c_gate_ctrl = ves1x93_i2c_gate_ctrl,
|
|
|
|
.set_frontend = ves1x93_set_frontend,
|
|
.get_frontend = ves1x93_get_frontend,
|
|
|
|
.read_status = ves1x93_read_status,
|
|
.read_ber = ves1x93_read_ber,
|
|
.read_signal_strength = ves1x93_read_signal_strength,
|
|
.read_snr = ves1x93_read_snr,
|
|
.read_ucblocks = ves1x93_read_ucblocks,
|
|
|
|
.set_voltage = ves1x93_set_voltage,
|
|
};
|
|
|
|
module_param(debug, int, 0644);
|
|
|
|
MODULE_DESCRIPTION("VLSI VES1x93 DVB-S Demodulator driver");
|
|
MODULE_AUTHOR("Ralph Metzler");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(ves1x93_attach);
|