android_kernel_motorola_sm6225/drivers/mtd/maps/ipaq-flash.c
Russell King 0c2e4b4ff3 [ARM] Drivers should not make use of architecture private __ioremap
__ioremap is an architecture private interface and must not be used
by drivers when the architecture independent interface will do just
as well.  Switch the ipaq drivers to use the correct interface.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-17 16:46:41 +00:00

463 lines
11 KiB
C

/*
* Flash memory access on iPAQ Handhelds (either SA1100 or PXA250 based)
*
* (C) 2000 Nicolas Pitre <nico@cam.org>
* (C) 2002 Hewlett-Packard Company <jamey.hicks@hp.com>
* (C) 2003 Christian Pellegrin <chri@ascensit.com>, <chri@infis.univ.ts.it>: concatenation of multiple flashes
*
* $Id: ipaq-flash.c,v 1.5 2005/11/07 11:14:27 gleixner Exp $
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <asm/page.h>
#include <asm/mach-types.h>
#include <asm/system.h>
#include <asm/errno.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#ifdef CONFIG_MTD_CONCAT
#include <linux/mtd/concat.h>
#endif
#include <asm/hardware.h>
#include <asm/arch-sa1100/h3600.h>
#include <asm/io.h>
#ifndef CONFIG_IPAQ_HANDHELD
#error This is for iPAQ Handhelds only
#endif
#ifdef CONFIG_SA1100_JORNADA56X
static void jornada56x_set_vpp(struct map_info *map, int vpp)
{
if (vpp)
GPSR = GPIO_GPIO26;
else
GPCR = GPIO_GPIO26;
GPDR |= GPIO_GPIO26;
}
#endif
#ifdef CONFIG_SA1100_JORNADA720
static void jornada720_set_vpp(struct map_info *map, int vpp)
{
if (vpp)
PPSR |= 0x80;
else
PPSR &= ~0x80;
PPDR |= 0x80;
}
#endif
#define MAX_IPAQ_CS 2 /* Number of CS we are going to test */
#define IPAQ_MAP_INIT(X) \
{ \
name: "IPAQ flash " X, \
}
static struct map_info ipaq_map[MAX_IPAQ_CS] = {
IPAQ_MAP_INIT("bank 1"),
IPAQ_MAP_INIT("bank 2")
};
static struct mtd_info *my_sub_mtd[MAX_IPAQ_CS] = {
NULL,
NULL
};
/*
* Here are partition information for all known IPAQ-based devices.
* See include/linux/mtd/partitions.h for definition of the mtd_partition
* structure.
*
* The *_max_flash_size is the maximum possible mapped flash size which
* is not necessarily the actual flash size. It must be no more than
* the value specified in the "struct map_desc *_io_desc" mapping
* definition for the corresponding machine.
*
* Please keep these in alphabetical order, and formatted as per existing
* entries. Thanks.
*/
#ifdef CONFIG_IPAQ_HANDHELD
static unsigned long h3xxx_max_flash_size = 0x04000000;
static struct mtd_partition h3xxx_partitions[] = {
{
name: "H3XXX boot firmware",
#ifndef CONFIG_LAB
size: 0x00040000,
#else
size: 0x00080000,
#endif
offset: 0,
#ifndef CONFIG_LAB
mask_flags: MTD_WRITEABLE, /* force read-only */
#endif
},
{
name: "H3XXX root jffs2",
#ifndef CONFIG_LAB
size: 0x2000000 - 2*0x40000, /* Warning, this is fixed later */
offset: 0x00040000,
#else
size: 0x2000000 - 0x40000 - 0x80000, /* Warning, this is fixed later */
offset: 0x00080000,
#endif
},
{
name: "asset",
size: 0x40000,
offset: 0x2000000 - 0x40000, /* Warning, this is fixed later */
mask_flags: MTD_WRITEABLE, /* force read-only */
}
};
#ifndef CONFIG_MTD_CONCAT
static struct mtd_partition h3xxx_partitions_bank2[] = {
/* this is used only on 2 CS machines when concat is not present */
{
name: "second H3XXX root jffs2",
size: 0x1000000 - 0x40000, /* Warning, this is fixed later */
offset: 0x00000000,
},
{
name: "second asset",
size: 0x40000,
offset: 0x1000000 - 0x40000, /* Warning, this is fixed later */
mask_flags: MTD_WRITEABLE, /* force read-only */
}
};
#endif
static DEFINE_SPINLOCK(ipaq_vpp_lock);
static void h3xxx_set_vpp(struct map_info *map, int vpp)
{
static int nest = 0;
spin_lock(&ipaq_vpp_lock);
if (vpp)
nest++;
else
nest--;
if (nest)
assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 1);
else
assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, 0);
spin_unlock(&ipaq_vpp_lock);
}
#endif
#if defined(CONFIG_SA1100_JORNADA56X) || defined(CONFIG_SA1100_JORNADA720)
static unsigned long jornada_max_flash_size = 0x02000000;
static struct mtd_partition jornada_partitions[] = {
{
name: "Jornada boot firmware",
size: 0x00040000,
offset: 0,
mask_flags: MTD_WRITEABLE, /* force read-only */
}, {
name: "Jornada root jffs2",
size: MTDPART_SIZ_FULL,
offset: 0x00040000,
}
};
#endif
static struct mtd_partition *parsed_parts;
static struct mtd_info *mymtd;
static unsigned long cs_phys[] = {
#ifdef CONFIG_ARCH_SA1100
SA1100_CS0_PHYS,
SA1100_CS1_PHYS,
SA1100_CS2_PHYS,
SA1100_CS3_PHYS,
SA1100_CS4_PHYS,
SA1100_CS5_PHYS,
#else
PXA_CS0_PHYS,
PXA_CS1_PHYS,
PXA_CS2_PHYS,
PXA_CS3_PHYS,
PXA_CS4_PHYS,
PXA_CS5_PHYS,
#endif
};
static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
static int __init h1900_special_case(void);
int __init ipaq_mtd_init(void)
{
struct mtd_partition *parts = NULL;
int nb_parts = 0;
int parsed_nr_parts = 0;
const char *part_type;
int i; /* used when we have >1 flash chips */
unsigned long tot_flashsize = 0; /* used when we have >1 flash chips */
/* Default flash bankwidth */
// ipaq_map.bankwidth = (MSC0 & MSC_RBW) ? 2 : 4;
if (machine_is_h1900())
{
/* For our intents, the h1900 is not a real iPAQ, so we special-case it. */
return h1900_special_case();
}
if (machine_is_h3100() || machine_is_h1900())
for(i=0; i<MAX_IPAQ_CS; i++)
ipaq_map[i].bankwidth = 2;
else
for(i=0; i<MAX_IPAQ_CS; i++)
ipaq_map[i].bankwidth = 4;
/*
* Static partition definition selection
*/
part_type = "static";
simple_map_init(&ipaq_map[0]);
simple_map_init(&ipaq_map[1]);
#ifdef CONFIG_IPAQ_HANDHELD
if (machine_is_ipaq()) {
parts = h3xxx_partitions;
nb_parts = ARRAY_SIZE(h3xxx_partitions);
for(i=0; i<MAX_IPAQ_CS; i++) {
ipaq_map[i].size = h3xxx_max_flash_size;
ipaq_map[i].set_vpp = h3xxx_set_vpp;
ipaq_map[i].phys = cs_phys[i];
ipaq_map[i].virt = ioremap(cs_phys[i], 0x04000000);
if (machine_is_h3100 () || machine_is_h1900())
ipaq_map[i].bankwidth = 2;
}
if (machine_is_h3600()) {
/* No asset partition here */
h3xxx_partitions[1].size += 0x40000;
nb_parts--;
}
}
#endif
#ifdef CONFIG_ARCH_H5400
if (machine_is_h5400()) {
ipaq_map[0].size = 0x02000000;
ipaq_map[1].size = 0x02000000;
ipaq_map[1].phys = 0x02000000;
ipaq_map[1].virt = ipaq_map[0].virt + 0x02000000;
}
#endif
#ifdef CONFIG_ARCH_H1900
if (machine_is_h1900()) {
ipaq_map[0].size = 0x00400000;
ipaq_map[1].size = 0x02000000;
ipaq_map[1].phys = 0x00080000;
ipaq_map[1].virt = ipaq_map[0].virt + 0x00080000;
}
#endif
#ifdef CONFIG_SA1100_JORNADA56X
if (machine_is_jornada56x()) {
parts = jornada_partitions;
nb_parts = ARRAY_SIZE(jornada_partitions);
ipaq_map[0].size = jornada_max_flash_size;
ipaq_map[0].set_vpp = jornada56x_set_vpp;
ipaq_map[0].virt = (__u32)ioremap(0x0, 0x04000000);
}
#endif
#ifdef CONFIG_SA1100_JORNADA720
if (machine_is_jornada720()) {
parts = jornada_partitions;
nb_parts = ARRAY_SIZE(jornada_partitions);
ipaq_map[0].size = jornada_max_flash_size;
ipaq_map[0].set_vpp = jornada720_set_vpp;
}
#endif
if (machine_is_ipaq()) { /* for iPAQs only */
for(i=0; i<MAX_IPAQ_CS; i++) {
printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with CFI.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt);
my_sub_mtd[i] = do_map_probe("cfi_probe", &ipaq_map[i]);
if (!my_sub_mtd[i]) {
printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[i].bankwidth*8, ipaq_map[i].virt);
my_sub_mtd[i] = do_map_probe("jedec_probe", &ipaq_map[i]);
}
if (!my_sub_mtd[i]) {
printk(KERN_NOTICE "iPAQ flash: failed to find flash.\n");
if (i)
break;
else
return -ENXIO;
} else
printk(KERN_NOTICE "iPAQ flash: found %d bytes\n", my_sub_mtd[i]->size);
/* do we really need this debugging? --joshua 20030703 */
// printk("my_sub_mtd[%d]=%p\n", i, my_sub_mtd[i]);
my_sub_mtd[i]->owner = THIS_MODULE;
tot_flashsize += my_sub_mtd[i]->size;
}
#ifdef CONFIG_MTD_CONCAT
/* fix the asset location */
# ifdef CONFIG_LAB
h3xxx_partitions[1].size = tot_flashsize - 0x40000 - 0x80000 /* extra big boot block */;
# else
h3xxx_partitions[1].size = tot_flashsize - 2 * 0x40000;
# endif
h3xxx_partitions[2].offset = tot_flashsize - 0x40000;
/* and concat the devices */
mymtd = mtd_concat_create(&my_sub_mtd[0], i,
"ipaq");
if (!mymtd) {
printk("Cannot create iPAQ concat device\n");
return -ENXIO;
}
#else
mymtd = my_sub_mtd[0];
/*
*In the very near future, command line partition parsing
* will use the device name as 'mtd-id' instead of a value
* passed to the parse_cmdline_partitions() routine. Since
* the bootldr says 'ipaq', make sure it continues to work.
*/
mymtd->name = "ipaq";
if ((machine_is_h3600())) {
# ifdef CONFIG_LAB
h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x80000;
# else
h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000;
# endif
nb_parts = 2;
} else {
# ifdef CONFIG_LAB
h3xxx_partitions[1].size = my_sub_mtd[0]->size - 0x40000 - 0x80000; /* extra big boot block */
# else
h3xxx_partitions[1].size = my_sub_mtd[0]->size - 2*0x40000;
# endif
h3xxx_partitions[2].offset = my_sub_mtd[0]->size - 0x40000;
}
if (my_sub_mtd[1]) {
# ifdef CONFIG_LAB
h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x80000;
# else
h3xxx_partitions_bank2[0].size = my_sub_mtd[1]->size - 0x40000;
# endif
h3xxx_partitions_bank2[1].offset = my_sub_mtd[1]->size - 0x40000;
}
#endif
}
else {
/*
* Now let's probe for the actual flash. Do it here since
* specific machine settings might have been set above.
*/
printk(KERN_NOTICE "IPAQ flash: probing %d-bit flash bus, window=%lx\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
mymtd = do_map_probe("cfi_probe", &ipaq_map[0]);
if (!mymtd)
return -ENXIO;
mymtd->owner = THIS_MODULE;
}
/*
* Dynamic partition selection stuff (might override the static ones)
*/
i = parse_mtd_partitions(mymtd, part_probes, &parsed_parts, 0);
if (i > 0) {
nb_parts = parsed_nr_parts = i;
parts = parsed_parts;
part_type = "dynamic";
}
if (!parts) {
printk(KERN_NOTICE "IPAQ flash: no partition info available, registering whole flash at once\n");
add_mtd_device(mymtd);
#ifndef CONFIG_MTD_CONCAT
if (my_sub_mtd[1])
add_mtd_device(my_sub_mtd[1]);
#endif
} else {
printk(KERN_NOTICE "Using %s partition definition\n", part_type);
add_mtd_partitions(mymtd, parts, nb_parts);
#ifndef CONFIG_MTD_CONCAT
if (my_sub_mtd[1])
add_mtd_partitions(my_sub_mtd[1], h3xxx_partitions_bank2, ARRAY_SIZE(h3xxx_partitions_bank2));
#endif
}
return 0;
}
static void __exit ipaq_mtd_cleanup(void)
{
int i;
if (mymtd) {
del_mtd_partitions(mymtd);
#ifndef CONFIG_MTD_CONCAT
if (my_sub_mtd[1])
del_mtd_partitions(my_sub_mtd[1]);
#endif
map_destroy(mymtd);
#ifdef CONFIG_MTD_CONCAT
for(i=0; i<MAX_IPAQ_CS; i++)
#else
for(i=1; i<MAX_IPAQ_CS; i++)
#endif
{
if (my_sub_mtd[i])
map_destroy(my_sub_mtd[i]);
}
kfree(parsed_parts);
}
}
static int __init h1900_special_case(void)
{
/* The iPAQ h1900 is a special case - it has weird ROM. */
simple_map_init(&ipaq_map[0]);
ipaq_map[0].size = 0x80000;
ipaq_map[0].set_vpp = h3xxx_set_vpp;
ipaq_map[0].phys = 0x0;
ipaq_map[0].virt = ioremap(0x0, 0x04000000);
ipaq_map[0].bankwidth = 2;
printk(KERN_NOTICE "iPAQ flash: probing %d-bit flash bus, window=%lx with JEDEC.\n", ipaq_map[0].bankwidth*8, ipaq_map[0].virt);
mymtd = do_map_probe("jedec_probe", &ipaq_map[0]);
if (!mymtd)
return -ENODEV;
add_mtd_device(mymtd);
printk(KERN_NOTICE "iPAQ flash: registered h1910 flash\n");
return 0;
}
module_init(ipaq_mtd_init);
module_exit(ipaq_mtd_cleanup);
MODULE_AUTHOR("Jamey Hicks");
MODULE_DESCRIPTION("IPAQ CFI map driver");
MODULE_LICENSE("MIT");