e58ca3de64
This fixes some problems with the way the some things represented in the device tree for the Holly and Taiga boards. This means changes both to the dts files, and to the code which instantiates the tsi108 ethernet platform devices based on the device tree. - First, and most importantly, the ethernet PHYs are given with an identical 'reg' property. This reg currently encodes the accessible register used to initiate mdio interaction with the PHYs, rather than a meaningful address on the parent bus (mdio in this case), which is incorrect. Instead we give the address of these registers as 'reg' in the mdio node itself, and encode the ID of each phy in their 'reg' propertyies. - Currently the platform device constructor enables a workaround in the tsi108 ethernet driver based on the compatible property of the PHY. This is incorrect, because the workaround in question is necessary due to the board's wiring of the PHY, not the model of PHY itself. This patch alters the constructor to instead enable the workaround based on a new special property in the PHY node. - The compatible properties on a number of nodes in the device tree are insufficiently precise. In particular the PHYs give only "bcm54xx", which is broken, since there are many bcm54xx PHY models, and they have differences which matter. The mdio had a compatible property of "tsi-ethernet" identical to the ethernet MAC nodes, which doesn't make sense. The ethernet, i2c, bridge and PCI nodes were given only as "tsi-*" which is somewhat inprecise, we replace with "tsi108-*" in the case of Taiga (which has a TSI108 bridge), and "tsi109-*", "tsi108-*" in the case of Holly (which has a TSI109 bridge). - We remove some "model" properties from the ethernets on Taiga board which were neither useful nor adequately precise. - On Holly we change to using a dtc label instead of a full path to reference the MPIC node, which makes the dts a little more readable. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
200 lines
4.6 KiB
Text
200 lines
4.6 KiB
Text
/*
|
|
* Device Tree Source for IBM Holly (PPC 750CL with TSI controller)
|
|
* Copyright 2007, IBM Corporation
|
|
*
|
|
* Stephen Winiecki <stevewin@us.ibm.com>
|
|
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*
|
|
* To build:
|
|
* dtc -I dts -O asm -o holly.S -b 0 holly.dts
|
|
* dtc -I dts -O dtb -o holly.dtb -b 0 holly.dts
|
|
*/
|
|
|
|
/ {
|
|
model = "41K7339";
|
|
compatible = "ibm,holly";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells =<0>;
|
|
PowerPC,750CL@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <20>;
|
|
i-cache-line-size = <20>;
|
|
d-cache-size = <8000>;
|
|
i-cache-size = <8000>;
|
|
d-cache-sets = <80>;
|
|
i-cache-sets = <80>;
|
|
timebase-frequency = <2faf080>;
|
|
clock-frequency = <23c34600>;
|
|
bus-frequency = <bebc200>;
|
|
32-bit;
|
|
};
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <00000000 20000000>;
|
|
};
|
|
|
|
tsi109@c0000000 {
|
|
device_type = "tsi-bridge";
|
|
compatible = "tsi109-bridge", "tsi108-bridge";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <00000000 c0000000 00010000>;
|
|
reg = <c0000000 00010000>;
|
|
|
|
i2c@7000 {
|
|
device_type = "i2c";
|
|
compatible = "tsi109-i2c", "tsi108-i2c";
|
|
interrupt-parent = <&MPIC>;
|
|
interrupts = <e 2>;
|
|
reg = <7000 400>;
|
|
};
|
|
|
|
MDIO: mdio@6000 {
|
|
device_type = "mdio";
|
|
compatible = "tsi109-mdio", "tsi108-mdio";
|
|
reg = <6000 50>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PHY1: ethernet-phy@1 {
|
|
compatible = "bcm5461a";
|
|
reg = <1>;
|
|
txc-rxc-delay-disable;
|
|
};
|
|
|
|
PHY2: ethernet-phy@2 {
|
|
compatible = "bcm5461a";
|
|
reg = <2>;
|
|
txc-rxc-delay-disable;
|
|
};
|
|
};
|
|
|
|
ethernet@6200 {
|
|
device_type = "network";
|
|
compatible = "tsi109-ethernet", "tsi108-ethernet";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <6000 200>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupt-parent = <&MPIC>;
|
|
interrupts = <10 2>;
|
|
mdio-handle = <&MDIO>;
|
|
phy-handle = <&PHY1>;
|
|
};
|
|
|
|
ethernet@6600 {
|
|
device_type = "network";
|
|
compatible = "tsi109-ethernet", "tsi108-ethernet";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <6400 200>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupt-parent = <&MPIC>;
|
|
interrupts = <11 2>;
|
|
mdio-handle = <&MDIO>;
|
|
phy-handle = <&PHY2>;
|
|
};
|
|
|
|
serial@7808 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <7808 200>;
|
|
virtual-reg = <c0007808>;
|
|
clock-frequency = <3F9C6000>;
|
|
current-speed = <1c200>;
|
|
interrupt-parent = <&MPIC>;
|
|
interrupts = <c 2>;
|
|
};
|
|
|
|
serial@7c08 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <7c08 200>;
|
|
virtual-reg = <c0007c08>;
|
|
clock-frequency = <3F9C6000>;
|
|
current-speed = <1c200>;
|
|
interrupt-parent = <&MPIC>;
|
|
interrupts = <d 2>;
|
|
};
|
|
|
|
MPIC: pic@7400 {
|
|
device_type = "open-pic";
|
|
compatible = "chrp,open-pic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <7400 400>;
|
|
big-endian;
|
|
};
|
|
|
|
pci@1000 {
|
|
device_type = "pci";
|
|
compatible = "tsi109-pci", "tsi108-pci";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <1000 1000>;
|
|
bus-range = <0 0>;
|
|
/*----------------------------------------------------+
|
|
| PCI memory range.
|
|
| 01 denotes I/O space
|
|
| 02 denotes 32-bit memory space
|
|
+----------------------------------------------------*/
|
|
ranges = <02000000 0 40000000 40000000 0 10000000
|
|
01000000 0 00000000 7e000000 0 00010000>;
|
|
clock-frequency = <7f28154>;
|
|
interrupt-parent = <&MPIC>;
|
|
interrupts = <17 2>;
|
|
interrupt-map-mask = <f800 0 0 7>;
|
|
/*----------------------------------------------------+
|
|
| The INTA, INTB, INTC, INTD are shared.
|
|
+----------------------------------------------------*/
|
|
interrupt-map = <
|
|
0800 0 0 1 &RT0 24 0
|
|
0800 0 0 2 &RT0 25 0
|
|
0800 0 0 3 &RT0 26 0
|
|
0800 0 0 4 &RT0 27 0
|
|
|
|
1000 0 0 1 &RT0 25 0
|
|
1000 0 0 2 &RT0 26 0
|
|
1000 0 0 3 &RT0 27 0
|
|
1000 0 0 4 &RT0 24 0
|
|
|
|
1800 0 0 1 &RT0 26 0
|
|
1800 0 0 2 &RT0 27 0
|
|
1800 0 0 3 &RT0 24 0
|
|
1800 0 0 4 &RT0 25 0
|
|
|
|
2000 0 0 1 &RT0 27 0
|
|
2000 0 0 2 &RT0 24 0
|
|
2000 0 0 3 &RT0 25 0
|
|
2000 0 0 4 &RT0 26 0
|
|
>;
|
|
|
|
RT0: router@1180 {
|
|
device_type = "pic-router";
|
|
interrupt-controller;
|
|
big-endian;
|
|
clock-frequency = <0>;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <17 2>;
|
|
interrupt-parent = <&MPIC>;
|
|
};
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
linux,stdout-path = "/tsi109@c0000000/serial@7808";
|
|
};
|
|
};
|