asgardius/android_kernel_motorola_sm6225
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_motorola_sm6225/drivers/hwmon/asb100.c
Jean Delvare 303760b44a [PATCH] hwmon: hwmon vs i2c, second round (07/11) 
The only part left in i2c-sensor is the VRM/VRD/VID handling code.
This is in no way related to i2c, so it doesn't belong there. Move
the code to hwmon, where it belongs.

Note that not all hardware monitoring drivers do VRM/VRD/VID
operations, so less drivers depend on hwmon-vid than there were
depending on i2c-sensor.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-09-05 09:14:22 -07:00

1069 lines
30 KiB
C
Raw Blame History

/*
asb100.c - Part of lm_sensors, Linux kernel modules for hardware
monitoring
Copyright (C) 2004 Mark M. Hoffman <mhoffman@lightlink.com>
(derived from w83781d.c)
Copyright (C) 1998 - 2003 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>, and
Mark Studebaker <mdsxyz123@yahoo.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
This driver supports the hardware sensor chips: Asus ASB100 and
ASB100-A "BACH".
ASB100-A supports pwm1, while plain ASB100 does not. There is no known
way for the driver to tell which one is there.
Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
asb100 7 3 1 4 0x31 0x0694 yes no
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-vid.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/jiffies.h>
#include "lm75.h"
/*
HISTORY:
2003-12-29 1.0.0 Ported from lm_sensors project for kernel 2.6
*/
#define ASB100_VERSION "1.0.0"
/* I2C addresses to scan */
static unsigned short normal_i2c[] = { 0x2d, I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_1(asb100);
I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
/* Voltage IN registers 0-6 */
#define ASB100_REG_IN(nr) (0x20 + (nr))
#define ASB100_REG_IN_MAX(nr) (0x2b + (nr * 2))
#define ASB100_REG_IN_MIN(nr) (0x2c + (nr * 2))
/* FAN IN registers 1-3 */
#define ASB100_REG_FAN(nr) (0x28 + (nr))
#define ASB100_REG_FAN_MIN(nr) (0x3b + (nr))
/* TEMPERATURE registers 1-4 */
static const u16 asb100_reg_temp[] = {0, 0x27, 0x150, 0x250, 0x17};
static const u16 asb100_reg_temp_max[] = {0, 0x39, 0x155, 0x255, 0x18};
static const u16 asb100_reg_temp_hyst[] = {0, 0x3a, 0x153, 0x253, 0x19};
#define ASB100_REG_TEMP(nr) (asb100_reg_temp[nr])
#define ASB100_REG_TEMP_MAX(nr) (asb100_reg_temp_max[nr])
#define ASB100_REG_TEMP_HYST(nr) (asb100_reg_temp_hyst[nr])
#define ASB100_REG_TEMP2_CONFIG 0x0152
#define ASB100_REG_TEMP3_CONFIG 0x0252
#define ASB100_REG_CONFIG 0x40
#define ASB100_REG_ALARM1 0x41
#define ASB100_REG_ALARM2 0x42
#define ASB100_REG_SMIM1 0x43
#define ASB100_REG_SMIM2 0x44
#define ASB100_REG_VID_FANDIV 0x47
#define ASB100_REG_I2C_ADDR 0x48
#define ASB100_REG_CHIPID 0x49
#define ASB100_REG_I2C_SUBADDR 0x4a
#define ASB100_REG_PIN 0x4b
#define ASB100_REG_IRQ 0x4c
#define ASB100_REG_BANK 0x4e
#define ASB100_REG_CHIPMAN 0x4f
#define ASB100_REG_WCHIPID 0x58
/* bit 7 -> enable, bits 0-3 -> duty cycle */
#define ASB100_REG_PWM1 0x59
/* CONVERSIONS
Rounding and limit checking is only done on the TO_REG variants. */
/* These constants are a guess, consistent w/ w83781d */
#define ASB100_IN_MIN ( 0)
#define ASB100_IN_MAX (4080)
/* IN: 1/1000 V (0V to 4.08V)
REG: 16mV/bit */
static u8 IN_TO_REG(unsigned val)
{
unsigned nval = SENSORS_LIMIT(val, ASB100_IN_MIN, ASB100_IN_MAX);
return (nval + 8) / 16;
}
static unsigned IN_FROM_REG(u8 reg)
{
return reg * 16;
}
static u8 FAN_TO_REG(long rpm, int div)
{
if (rpm == -1)
return 0;
if (rpm == 0)
return 255;
rpm = SENSORS_LIMIT(rpm, 1, 1000000);
return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
static int FAN_FROM_REG(u8 val, int div)
{
return val==0 ? -1 : val==255 ? 0 : 1350000/(val*div);
}
/* These constants are a guess, consistent w/ w83781d */
#define ASB100_TEMP_MIN (-128000)
#define ASB100_TEMP_MAX ( 127000)
/* TEMP: 0.001C/bit (-128C to +127C)
REG: 1C/bit, two's complement */
static u8 TEMP_TO_REG(int temp)
{
int ntemp = SENSORS_LIMIT(temp, ASB100_TEMP_MIN, ASB100_TEMP_MAX);
ntemp += (ntemp<0 ? -500 : 500);
return (u8)(ntemp / 1000);
}
static int TEMP_FROM_REG(u8 reg)
{
return (s8)reg * 1000;
}
/* PWM: 0 - 255 per sensors documentation
REG: (6.25% duty cycle per bit) */
static u8 ASB100_PWM_TO_REG(int pwm)
{
pwm = SENSORS_LIMIT(pwm, 0, 255);
return (u8)(pwm / 16);
}
static int ASB100_PWM_FROM_REG(u8 reg)
{
return reg * 16;
}
#define DIV_FROM_REG(val) (1 << (val))
/* FAN DIV: 1, 2, 4, or 8 (defaults to 2)
REG: 0, 1, 2, or 3 (respectively) (defaults to 1) */
static u8 DIV_TO_REG(long val)
{
return val==8 ? 3 : val==4 ? 2 : val==1 ? 0 : 1;
}
/* For each registered client, we need to keep some data in memory. That
data is pointed to by client->data. The structure itself is
dynamically allocated, at the same time the client itself is allocated. */
struct asb100_data {
struct i2c_client client;
struct class_device *class_dev;
struct semaphore lock;
enum chips type;
struct semaphore update_lock;
unsigned long last_updated; /* In jiffies */
/* array of 2 pointers to subclients */
struct i2c_client *lm75[2];
char valid; /* !=0 if following fields are valid */
u8 in[7]; /* Register value */
u8 in_max[7]; /* Register value */
u8 in_min[7]; /* Register value */
u8 fan[3]; /* Register value */
u8 fan_min[3]; /* Register value */
u16 temp[4]; /* Register value (0 and 3 are u8 only) */
u16 temp_max[4]; /* Register value (0 and 3 are u8 only) */
u16 temp_hyst[4]; /* Register value (0 and 3 are u8 only) */
u8 fan_div[3]; /* Register encoding, right justified */
u8 pwm; /* Register encoding */
u8 vid; /* Register encoding, combined */
u32 alarms; /* Register encoding, combined */
u8 vrm;
};
static int asb100_read_value(struct i2c_client *client, u16 reg);
static void asb100_write_value(struct i2c_client *client, u16 reg, u16 val);
static int asb100_attach_adapter(struct i2c_adapter *adapter);
static int asb100_detect(struct i2c_adapter *adapter, int address, int kind);
static int asb100_detach_client(struct i2c_client *client);
static struct asb100_data *asb100_update_device(struct device *dev);
static void asb100_init_client(struct i2c_client *client);
static struct i2c_driver asb100_driver = {
.owner = THIS_MODULE,
.name = "asb100",
.id = I2C_DRIVERID_ASB100,
.flags = I2C_DF_NOTIFY,
.attach_adapter = asb100_attach_adapter,
.detach_client = asb100_detach_client,
};
/* 7 Voltages */
#define show_in_reg(reg) \
static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
{ \
struct asb100_data *data = asb100_update_device(dev); \
return sprintf(buf, "%d\n", IN_FROM_REG(data->reg[nr])); \
}
show_in_reg(in)
show_in_reg(in_min)
show_in_reg(in_max)
#define set_in_reg(REG, reg) \
static ssize_t set_in_##reg(struct device *dev, const char *buf, \
size_t count, int nr) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct asb100_data *data = i2c_get_clientdata(client); \
unsigned long val = simple_strtoul(buf, NULL, 10); \
\
down(&data->update_lock); \
data->in_##reg[nr] = IN_TO_REG(val); \
asb100_write_value(client, ASB100_REG_IN_##REG(nr), \
data->in_##reg[nr]); \
up(&data->update_lock); \
return count; \
}
set_in_reg(MIN, min)
set_in_reg(MAX, max)
#define sysfs_in(offset) \
static ssize_t \
show_in##offset (struct device *dev, struct device_attribute *attr, char *buf) \
{ \
return show_in(dev, buf, offset); \
} \
static DEVICE_ATTR(in##offset##_input, S_IRUGO, \
show_in##offset, NULL); \
static ssize_t \
show_in##offset##_min (struct device *dev, struct device_attribute *attr, char *buf) \
{ \
return show_in_min(dev, buf, offset); \
} \
static ssize_t \
show_in##offset##_max (struct device *dev, struct device_attribute *attr, char *buf) \
{ \
return show_in_max(dev, buf, offset); \
} \
static ssize_t set_in##offset##_min (struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
return set_in_min(dev, buf, count, offset); \
} \
static ssize_t set_in##offset##_max (struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
return set_in_max(dev, buf, count, offset); \
} \
static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \
show_in##offset##_min, set_in##offset##_min); \
static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \
show_in##offset##_max, set_in##offset##_max);
sysfs_in(0);
sysfs_in(1);
sysfs_in(2);
sysfs_in(3);
sysfs_in(4);
sysfs_in(5);
sysfs_in(6);
#define device_create_file_in(client, offset) do { \
device_create_file(&client->dev, &dev_attr_in##offset##_input); \
device_create_file(&client->dev, &dev_attr_in##offset##_min); \
device_create_file(&client->dev, &dev_attr_in##offset##_max); \
} while (0)
/* 3 Fans */
static ssize_t show_fan(struct device *dev, char *buf, int nr)
{
struct asb100_data *data = asb100_update_device(dev);
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr],
DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
{
struct asb100_data *data = asb100_update_device(dev);
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_div(struct device *dev, char *buf, int nr)
{
struct asb100_data *data = asb100_update_device(dev);
return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
}
static ssize_t set_fan_min(struct device *dev, const char *buf,
size_t count, int nr)
{
struct i2c_client *client = to_i2c_client(dev);
struct asb100_data *data = i2c_get_clientdata(client);
u32 val = simple_strtoul(buf, NULL, 10);
down(&data->update_lock);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
up(&data->update_lock);
return count;
}
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
least suprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t set_fan_div(struct device *dev, const char *buf,
size_t count, int nr)
{
struct i2c_client *client = to_i2c_client(dev);
struct asb100_data *data = i2c_get_clientdata(client);
unsigned long min;
unsigned long val = simple_strtoul(buf, NULL, 10);
int reg;
down(&data->update_lock);
min = FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr]));
data->fan_div[nr] = DIV_TO_REG(val);
switch(nr) {
case 0: /* fan 1 */
reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
reg = (reg & 0xcf) | (data->fan_div[0] << 4);
asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
break;
case 1: /* fan 2 */
reg = asb100_read_value(client, ASB100_REG_VID_FANDIV);
reg = (reg & 0x3f) | (data->fan_div[1] << 6);
asb100_write_value(client, ASB100_REG_VID_FANDIV, reg);
break;
case 2: /* fan 3 */
reg = asb100_read_value(client, ASB100_REG_PIN);
reg = (reg & 0x3f) | (data->fan_div[2] << 6);
asb100_write_value(client, ASB100_REG_PIN, reg);
break;
}
data->fan_min[nr] =
FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
asb100_write_value(client, ASB100_REG_FAN_MIN(nr), data->fan_min[nr]);
up(&data->update_lock);
return count;
}
#define sysfs_fan(offset) \
static ssize_t show_fan##offset(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
return show_fan(dev, buf, offset - 1); \
} \
static ssize_t show_fan##offset##_min(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
return show_fan_min(dev, buf, offset - 1); \
} \
static ssize_t show_fan##offset##_div(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
return show_fan_div(dev, buf, offset - 1); \
} \
static ssize_t set_fan##offset##_min(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
return set_fan_min(dev, buf, count, offset - 1); \
} \
static ssize_t set_fan##offset##_div(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
return set_fan_div(dev, buf, count, offset - 1); \
} \
static DEVICE_ATTR(fan##offset##_input, S_IRUGO, \
show_fan##offset, NULL); \
static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \
show_fan##offset##_min, set_fan##offset##_min); \
static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \
show_fan##offset##_div, set_fan##offset##_div);
sysfs_fan(1);
sysfs_fan(2);
sysfs_fan(3);
#define device_create_file_fan(client, offset) do { \
device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
} while (0)
/* 4 Temp. Sensors */
static int sprintf_temp_from_reg(u16 reg, char *buf, int nr)
{
int ret = 0;
switch (nr) {
case 1: case 2:
ret = sprintf(buf, "%d\n", LM75_TEMP_FROM_REG(reg));
break;
case 0: case 3: default:
ret = sprintf(buf, "%d\n", TEMP_FROM_REG(reg));
break;
}
return ret;
}
#define show_temp_reg(reg) \
static ssize_t show_##reg(struct device *dev, char *buf, int nr) \
{ \
struct asb100_data *data = asb100_update_device(dev); \
return sprintf_temp_from_reg(data->reg[nr], buf, nr); \
}
show_temp_reg(temp);
show_temp_reg(temp_max);
show_temp_reg(temp_hyst);
#define set_temp_reg(REG, reg) \
static ssize_t set_##reg(struct device *dev, const char *buf, \
size_t count, int nr) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct asb100_data *data = i2c_get_clientdata(client); \
unsigned long val = simple_strtoul(buf, NULL, 10); \
\
down(&data->update_lock); \
switch (nr) { \
case 1: case 2: \
data->reg[nr] = LM75_TEMP_TO_REG(val); \
break; \
case 0: case 3: default: \
data->reg[nr] = TEMP_TO_REG(val); \
break; \
} \
asb100_write_value(client, ASB100_REG_TEMP_##REG(nr+1), \
data->reg[nr]); \
up(&data->update_lock); \
return count; \
}
set_temp_reg(MAX, temp_max);
set_temp_reg(HYST, temp_hyst);
#define sysfs_temp(num) \
static ssize_t show_temp##num(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
return show_temp(dev, buf, num-1); \
} \
static DEVICE_ATTR(temp##num##_input, S_IRUGO, show_temp##num, NULL); \
static ssize_t show_temp_max##num(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
return show_temp_max(dev, buf, num-1); \
} \
static ssize_t set_temp_max##num(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
return set_temp_max(dev, buf, count, num-1); \
} \
static DEVICE_ATTR(temp##num##_max, S_IRUGO | S_IWUSR, \
show_temp_max##num, set_temp_max##num); \
static ssize_t show_temp_hyst##num(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
return show_temp_hyst(dev, buf, num-1); \
} \
static ssize_t set_temp_hyst##num(struct device *dev, struct device_attribute *attr, const char *buf, \
size_t count) \
{ \
return set_temp_hyst(dev, buf, count, num-1); \
} \
static DEVICE_ATTR(temp##num##_max_hyst, S_IRUGO | S_IWUSR, \
show_temp_hyst##num, set_temp_hyst##num);
sysfs_temp(1);
sysfs_temp(2);
sysfs_temp(3);
sysfs_temp(4);
/* VID */
#define device_create_file_temp(client, num) do { \
device_create_file(&client->dev, &dev_attr_temp##num##_input); \
device_create_file(&client->dev, &dev_attr_temp##num##_max); \
device_create_file(&client->dev, &dev_attr_temp##num##_max_hyst); \
} while (0)
static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
struct asb100_data *data = asb100_update_device(dev);
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
}
static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
#define device_create_file_vid(client) \
device_create_file(&client->dev, &dev_attr_cpu0_vid)
/* VRM */
static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
{
struct asb100_data *data = asb100_update_device(dev);
return sprintf(buf, "%d\n", data->vrm);
}
static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct asb100_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
data->vrm = val;
return count;
}
/* Alarms */
static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm, set_vrm);
#define device_create_file_vrm(client) \
device_create_file(&client->dev, &dev_attr_vrm);
static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
{
struct asb100_data *data = asb100_update_device(dev);
return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
#define device_create_file_alarms(client) \
device_create_file(&client->dev, &dev_attr_alarms)
/* 1 PWM */
static ssize_t show_pwm1(struct device *dev, struct device_attribute *attr, char *buf)
{
struct asb100_data *data = asb100_update_device(dev);
return sprintf(buf, "%d\n", ASB100_PWM_FROM_REG(data->pwm & 0x0f));
}
static ssize_t set_pwm1(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct asb100_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
down(&data->update_lock);
data->pwm &= 0x80; /* keep the enable bit */
data->pwm |= (0x0f & ASB100_PWM_TO_REG(val));
asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
up(&data->update_lock);
return count;
}
static ssize_t show_pwm_enable1(struct device *dev, struct device_attribute *attr, char *buf)
{
struct asb100_data *data = asb100_update_device(dev);
return sprintf(buf, "%d\n", (data->pwm & 0x80) ? 1 : 0);
}
static ssize_t set_pwm_enable1(struct device *dev, struct device_attribute *attr, const char *buf,
size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct asb100_data *data = i2c_get_clientdata(client);
unsigned long val = simple_strtoul(buf, NULL, 10);
down(&data->update_lock);
data->pwm &= 0x0f; /* keep the duty cycle bits */
data->pwm |= (val ? 0x80 : 0x00);
asb100_write_value(client, ASB100_REG_PWM1, data->pwm);
up(&data->update_lock);
return count;
}
static DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm1, set_pwm1);
static DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
show_pwm_enable1, set_pwm_enable1);
#define device_create_file_pwm1(client) do { \
device_create_file(&new_client->dev, &dev_attr_pwm1); \
device_create_file(&new_client->dev, &dev_attr_pwm1_enable); \
} while (0)
/* This function is called when:
asb100_driver is inserted (when this module is loaded), for each
available adapter
when a new adapter is inserted (and asb100_driver is still present)
*/
static int asb100_attach_adapter(struct i2c_adapter *adapter)
{
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
return i2c_probe(adapter, &addr_data, asb100_detect);
}
static int asb100_detect_subclients(struct i2c_adapter *adapter, int address,
int kind, struct i2c_client *new_client)
{
int i, id, err;
struct asb100_data *data = i2c_get_clientdata(new_client);
data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[0])) {
err = -ENOMEM;
goto ERROR_SC_0;
}
memset(data->lm75[0], 0x00, sizeof(struct i2c_client));
data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!(data->lm75[1])) {
err = -ENOMEM;
goto ERROR_SC_1;
}
memset(data->lm75[1], 0x00, sizeof(struct i2c_client));
id = i2c_adapter_id(adapter);
if (force_subclients[0] == id && force_subclients[1] == address) {
for (i = 2; i <= 3; i++) {
if (force_subclients[i] < 0x48 ||
force_subclients[i] > 0x4f) {
dev_err(&new_client->dev, "invalid subclient "
"address %d; must be 0x48-0x4f\n",
force_subclients[i]);
err = -ENODEV;
goto ERROR_SC_2;
}
}
asb100_write_value(new_client, ASB100_REG_I2C_SUBADDR,
(force_subclients[2] & 0x07) |
((force_subclients[3] & 0x07) <<4));
data->lm75[0]->addr = force_subclients[2];
data->lm75[1]->addr = force_subclients[3];
} else {
int val = asb100_read_value(new_client, ASB100_REG_I2C_SUBADDR);
data->lm75[0]->addr = 0x48 + (val & 0x07);
data->lm75[1]->addr = 0x48 + ((val >> 4) & 0x07);
}
if(data->lm75[0]->addr == data->lm75[1]->addr) {
dev_err(&new_client->dev, "duplicate addresses 0x%x "
"for subclients\n", data->lm75[0]->addr);
err = -ENODEV;
goto ERROR_SC_2;
}
for (i = 0; i <= 1; i++) {
i2c_set_clientdata(data->lm75[i], NULL);
data->lm75[i]->adapter = adapter;
data->lm75[i]->driver = &asb100_driver;
data->lm75[i]->flags = 0;
strlcpy(data->lm75[i]->name, "asb100 subclient", I2C_NAME_SIZE);
}
if ((err = i2c_attach_client(data->lm75[0]))) {
dev_err(&new_client->dev, "subclient %d registration "
"at address 0x%x failed.\n", i, data->lm75[0]->addr);
goto ERROR_SC_2;
}
if ((err = i2c_attach_client(data->lm75[1]))) {
dev_err(&new_client->dev, "subclient %d registration "
"at address 0x%x failed.\n", i, data->lm75[1]->addr);
goto ERROR_SC_3;
}
return 0;
/* Undo inits in case of errors */
ERROR_SC_3:
i2c_detach_client(data->lm75[0]);
ERROR_SC_2:
kfree(data->lm75[1]);
ERROR_SC_1:
kfree(data->lm75[0]);
ERROR_SC_0:
return err;
}
static int asb100_detect(struct i2c_adapter *adapter, int address, int kind)
{
int err;
struct i2c_client *new_client;
struct asb100_data *data;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
pr_debug("asb100.o: detect failed, "
"smbus byte data not supported!\n");
err = -ENODEV;
goto ERROR0;
}
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access asb100_{read,write}_value. */
if (!(data = kmalloc(sizeof(struct asb100_data), GFP_KERNEL))) {
pr_debug("asb100.o: detect failed, kmalloc failed!\n");
err = -ENOMEM;
goto ERROR0;
}
memset(data, 0, sizeof(struct asb100_data));
new_client = &data->client;
init_MUTEX(&data->lock);
i2c_set_clientdata(new_client, data);
new_client->addr = address;
new_client->adapter = adapter;
new_client->driver = &asb100_driver;
new_client->flags = 0;
/* Now, we do the remaining detection. */
/* The chip may be stuck in some other bank than bank 0. This may
make reading other information impossible. Specify a force=... or
force_*=... parameter, and the chip will be reset to the right
bank. */
if (kind < 0) {
int val1 = asb100_read_value(new_client, ASB100_REG_BANK);
int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN);
/* If we're in bank 0 */
if ( (!(val1 & 0x07)) &&
/* Check for ASB100 ID (low byte) */
( ((!(val1 & 0x80)) && (val2 != 0x94)) ||
/* Check for ASB100 ID (high byte ) */
((val1 & 0x80) && (val2 != 0x06)) ) ) {
pr_debug("asb100.o: detect failed, "
"bad chip id 0x%02x!\n", val2);
err = -ENODEV;
goto ERROR1;
}
} /* kind < 0 */
/* We have either had a force parameter, or we have already detected
Winbond. Put it now into bank 0 and Vendor ID High Byte */
asb100_write_value(new_client, ASB100_REG_BANK,
(asb100_read_value(new_client, ASB100_REG_BANK) & 0x78) | 0x80);
/* Determine the chip type. */
if (kind <= 0) {
int val1 = asb100_read_value(new_client, ASB100_REG_WCHIPID);
int val2 = asb100_read_value(new_client, ASB100_REG_CHIPMAN);
if ((val1 == 0x31) && (val2 == 0x06))
kind = asb100;
else {
if (kind == 0)
dev_warn(&new_client->dev, "ignoring "
"'force' parameter for unknown chip "
"at adapter %d, address 0x%02x.\n",
i2c_adapter_id(adapter), address);
err = -ENODEV;
goto ERROR1;
}
}
/* Fill in remaining client fields and put it into the global list */
strlcpy(new_client->name, "asb100", I2C_NAME_SIZE);
data->type = kind;
data->valid = 0;
init_MUTEX(&data->update_lock);
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
goto ERROR1;
/* Attach secondary lm75 clients */
if ((err = asb100_detect_subclients(adapter, address, kind,
new_client)))
goto ERROR2;
/* Initialize the chip */
asb100_init_client(new_client);
/* A few vars need to be filled upon startup */
data->fan_min[0] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(0));
data->fan_min[1] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(1));
data->fan_min[2] = asb100_read_value(new_client, ASB100_REG_FAN_MIN(2));
/* Register sysfs hooks */
data->class_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->class_dev)) {
err = PTR_ERR(data->class_dev);
goto ERROR3;
}
device_create_file_in(new_client, 0);
device_create_file_in(new_client, 1);
device_create_file_in(new_client, 2);
device_create_file_in(new_client, 3);
device_create_file_in(new_client, 4);
device_create_file_in(new_client, 5);
device_create_file_in(new_client, 6);
device_create_file_fan(new_client, 1);
device_create_file_fan(new_client, 2);
device_create_file_fan(new_client, 3);
device_create_file_temp(new_client, 1);
device_create_file_temp(new_client, 2);
device_create_file_temp(new_client, 3);
device_create_file_temp(new_client, 4);
device_create_file_vid(new_client);
device_create_file_vrm(new_client);
device_create_file_alarms(new_client);
device_create_file_pwm1(new_client);
return 0;
ERROR3:
i2c_detach_client(data->lm75[1]);
i2c_detach_client(data->lm75[0]);
kfree(data->lm75[1]);
kfree(data->lm75[0]);
ERROR2:
i2c_detach_client(new_client);
ERROR1:
kfree(data);
ERROR0:
return err;
}
static int asb100_detach_client(struct i2c_client *client)
{
struct asb100_data *data = i2c_get_clientdata(client);
int err;
/* main client */
if (data)
hwmon_device_unregister(data->class_dev);
if ((err = i2c_detach_client(client)))
return err;
/* main client */
if (data)
kfree(data);
/* subclient */
else
kfree(client);
return 0;
}
/* The SMBus locks itself, usually, but nothing may access the chip between
bank switches. */
static int asb100_read_value(struct i2c_client *client, u16 reg)
{
struct asb100_data *data = i2c_get_clientdata(client);
struct i2c_client *cl;
int res, bank;
down(&data->lock);
bank = (reg >> 8) & 0x0f;
if (bank > 2)
/* switch banks */
i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
if (bank == 0 || bank > 2) {
res = i2c_smbus_read_byte_data(client, reg & 0xff);
} else {
/* switch to subclient */
cl = data->lm75[bank - 1];
/* convert from ISA to LM75 I2C addresses */
switch (reg & 0xff) {
case 0x50: /* TEMP */
res = swab16(i2c_smbus_read_word_data (cl, 0));
break;
case 0x52: /* CONFIG */
res = i2c_smbus_read_byte_data(cl, 1);
break;
case 0x53: /* HYST */
res = swab16(i2c_smbus_read_word_data (cl, 2));
break;
case 0x55: /* MAX */
default:
res = swab16(i2c_smbus_read_word_data (cl, 3));
break;
}
}
if (bank > 2)
i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
up(&data->lock);
return res;
}
static void asb100_write_value(struct i2c_client *client, u16 reg, u16 value)
{
struct asb100_data *data = i2c_get_clientdata(client);
struct i2c_client *cl;
int bank;
down(&data->lock);
bank = (reg >> 8) & 0x0f;
if (bank > 2)
/* switch banks */
i2c_smbus_write_byte_data(client, ASB100_REG_BANK, bank);
if (bank == 0 || bank > 2) {
i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff);
} else {
/* switch to subclient */
cl = data->lm75[bank - 1];
/* convert from ISA to LM75 I2C addresses */
switch (reg & 0xff) {
case 0x52: /* CONFIG */
i2c_smbus_write_byte_data(cl, 1, value & 0xff);
break;
case 0x53: /* HYST */
i2c_smbus_write_word_data(cl, 2, swab16(value));
break;
case 0x55: /* MAX */
i2c_smbus_write_word_data(cl, 3, swab16(value));
break;
}
}
if (bank > 2)
i2c_smbus_write_byte_data(client, ASB100_REG_BANK, 0);
up(&data->lock);
}
static void asb100_init_client(struct i2c_client *client)
{
struct asb100_data *data = i2c_get_clientdata(client);
int vid = 0;
vid = asb100_read_value(client, ASB100_REG_VID_FANDIV) & 0x0f;
vid |= (asb100_read_value(client, ASB100_REG_CHIPID) & 0x01) << 4;
data->vrm = vid_which_vrm();
vid = vid_from_reg(vid, data->vrm);
/* Start monitoring */
asb100_write_value(client, ASB100_REG_CONFIG,
(asb100_read_value(client, ASB100_REG_CONFIG) & 0xf7) | 0x01);
}
static struct asb100_data *asb100_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct asb100_data *data = i2c_get_clientdata(client);
int i;
down(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
dev_dbg(&client->dev, "starting device update...\n");
/* 7 voltage inputs */
for (i = 0; i < 7; i++) {
data->in[i] = asb100_read_value(client,
ASB100_REG_IN(i));
data->in_min[i] = asb100_read_value(client,
ASB100_REG_IN_MIN(i));
data->in_max[i] = asb100_read_value(client,
ASB100_REG_IN_MAX(i));
}
/* 3 fan inputs */
for (i = 0; i < 3; i++) {
data->fan[i] = asb100_read_value(client,
ASB100_REG_FAN(i));
data->fan_min[i] = asb100_read_value(client,
ASB100_REG_FAN_MIN(i));
}
/* 4 temperature inputs */
for (i = 1; i <= 4; i++) {
data->temp[i-1] = asb100_read_value(client,
ASB100_REG_TEMP(i));
data->temp_max[i-1] = asb100_read_value(client,
ASB100_REG_TEMP_MAX(i));
data->temp_hyst[i-1] = asb100_read_value(client,
ASB100_REG_TEMP_HYST(i));
}
/* VID and fan divisors */
i = asb100_read_value(client, ASB100_REG_VID_FANDIV);
data->vid = i & 0x0f;
data->vid |= (asb100_read_value(client,
ASB100_REG_CHIPID) & 0x01) << 4;
data->fan_div[0] = (i >> 4) & 0x03;
data->fan_div[1] = (i >> 6) & 0x03;
data->fan_div[2] = (asb100_read_value(client,
ASB100_REG_PIN) >> 6) & 0x03;
/* PWM */
data->pwm = asb100_read_value(client, ASB100_REG_PWM1);
/* alarms */
data->alarms = asb100_read_value(client, ASB100_REG_ALARM1) +
(asb100_read_value(client, ASB100_REG_ALARM2) << 8);
data->last_updated = jiffies;
data->valid = 1;
dev_dbg(&client->dev, "... device update complete\n");
}
up(&data->update_lock);
return data;
}
static int __init asb100_init(void)
{
return i2c_add_driver(&asb100_driver);
}
static void __exit asb100_exit(void)
{
i2c_del_driver(&asb100_driver);
}
MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>");
MODULE_DESCRIPTION("ASB100 Bach driver");
MODULE_LICENSE("GPL");
module_init(asb100_init);
module_exit(asb100_exit);
Reference in a new issue View git blame Copy permalink