515c208db8
This adds support for a hybrid PAL/DVB/FM card. Unfortunately I tested only the DVB since I don't have any proper antenna available and I can receive even the DVB just barely so; I can hear noise in the FM part but I couldn't catch any station, then again I don't have an FM antenna either. The PAL/FM and IR control data are based on what I harvested on the 'net. Perhaps I or someone else will fix them if they turn out to be wrong. Signed-off-by: Petr Baudis <pasky@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
1295 lines
39 KiB
C
1295 lines
39 KiB
C
/*
|
|
*
|
|
* (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
|
|
*
|
|
* Extended 3 / 2005 by Hartmut Hackmann to support various
|
|
* cards with the tda10046 DVB-T channel decoder
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/suspend.h>
|
|
|
|
#include "saa7134-reg.h"
|
|
#include "saa7134.h"
|
|
#include <media/v4l2-common.h>
|
|
#include "dvb-pll.h"
|
|
|
|
#include "mt352.h"
|
|
#include "mt352_priv.h" /* FIXME */
|
|
#include "tda1004x.h"
|
|
#include "nxt200x.h"
|
|
|
|
#include "tda10086.h"
|
|
#include "tda826x.h"
|
|
#include "isl6421.h"
|
|
MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static unsigned int antenna_pwr = 0;
|
|
|
|
module_param(antenna_pwr, int, 0444);
|
|
MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
|
|
{
|
|
u32 ok;
|
|
|
|
if (!on) {
|
|
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
|
|
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
|
|
return 0;
|
|
}
|
|
|
|
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
|
|
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
|
|
udelay(10);
|
|
|
|
saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28));
|
|
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
|
|
udelay(10);
|
|
saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
|
|
udelay(10);
|
|
ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
|
|
printk("%s: %s %s\n", dev->name, __FUNCTION__,
|
|
ok ? "on" : "off");
|
|
|
|
if (!ok)
|
|
saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
|
|
return ok;
|
|
}
|
|
|
|
static int mt352_pinnacle_init(struct dvb_frontend* fe)
|
|
{
|
|
static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 };
|
|
static u8 reset [] = { RESET, 0x80 };
|
|
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
|
|
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
|
|
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
|
|
static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 };
|
|
static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f };
|
|
static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d };
|
|
static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
|
|
struct saa7134_dev *dev= fe->dvb->priv;
|
|
|
|
printk("%s: %s called\n",dev->name,__FUNCTION__);
|
|
|
|
mt352_write(fe, clock_config, sizeof(clock_config));
|
|
udelay(200);
|
|
mt352_write(fe, reset, sizeof(reset));
|
|
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
|
|
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
|
|
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
|
|
mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
|
|
|
|
mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
|
|
mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
|
|
mt352_write(fe, irq_cfg, sizeof(irq_cfg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_aver777_init(struct dvb_frontend* fe)
|
|
{
|
|
static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
|
|
static u8 reset [] = { RESET, 0x80 };
|
|
static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
|
|
static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
|
|
static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
|
|
|
|
mt352_write(fe, clock_config, sizeof(clock_config));
|
|
udelay(200);
|
|
mt352_write(fe, reset, sizeof(reset));
|
|
mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
|
|
mt352_write(fe, agc_cfg, sizeof(agc_cfg));
|
|
mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters* params)
|
|
{
|
|
u8 off[] = { 0x00, 0xf1};
|
|
u8 on[] = { 0x00, 0x71};
|
|
struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
|
|
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
struct v4l2_frequency f;
|
|
|
|
/* set frequency (mt2050) */
|
|
f.tuner = 0;
|
|
f.type = V4L2_TUNER_DIGITAL_TV;
|
|
f.frequency = params->frequency / 1000 * 16 / 1000;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
|
saa7134_i2c_call_clients(dev,VIDIOC_S_FREQUENCY,&f);
|
|
msg.buf = on;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
|
|
|
pinnacle_antenna_pwr(dev, antenna_pwr);
|
|
|
|
/* mt352 setup */
|
|
return mt352_pinnacle_init(fe);
|
|
}
|
|
|
|
static int mt352_aver777_tuner_calc_regs(struct dvb_frontend *fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
|
|
{
|
|
if (buf_len < 5)
|
|
return -EINVAL;
|
|
|
|
pllbuf[0] = 0x61;
|
|
dvb_pll_configure(&dvb_pll_philips_td1316, pllbuf+1,
|
|
params->frequency,
|
|
params->u.ofdm.bandwidth);
|
|
return 5;
|
|
}
|
|
|
|
static struct mt352_config pinnacle_300i = {
|
|
.demod_address = 0x3c >> 1,
|
|
.adc_clock = 20333,
|
|
.if2 = 36150,
|
|
.no_tuner = 1,
|
|
.demod_init = mt352_pinnacle_init,
|
|
};
|
|
|
|
static struct mt352_config avermedia_777 = {
|
|
.demod_address = 0xf,
|
|
.demod_init = mt352_aver777_init,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
static int philips_tda6651_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
u8 tuner_buf[4];
|
|
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
|
|
sizeof(tuner_buf) };
|
|
int tuner_frequency = 0;
|
|
u8 band, cp, filter;
|
|
|
|
/* determine charge pump */
|
|
tuner_frequency = params->frequency + 36166000;
|
|
if (tuner_frequency < 87000000)
|
|
return -EINVAL;
|
|
else if (tuner_frequency < 130000000)
|
|
cp = 3;
|
|
else if (tuner_frequency < 160000000)
|
|
cp = 5;
|
|
else if (tuner_frequency < 200000000)
|
|
cp = 6;
|
|
else if (tuner_frequency < 290000000)
|
|
cp = 3;
|
|
else if (tuner_frequency < 420000000)
|
|
cp = 5;
|
|
else if (tuner_frequency < 480000000)
|
|
cp = 6;
|
|
else if (tuner_frequency < 620000000)
|
|
cp = 3;
|
|
else if (tuner_frequency < 830000000)
|
|
cp = 5;
|
|
else if (tuner_frequency < 895000000)
|
|
cp = 7;
|
|
else
|
|
return -EINVAL;
|
|
|
|
/* determine band */
|
|
if (params->frequency < 49000000)
|
|
return -EINVAL;
|
|
else if (params->frequency < 161000000)
|
|
band = 1;
|
|
else if (params->frequency < 444000000)
|
|
band = 2;
|
|
else if (params->frequency < 861000000)
|
|
band = 4;
|
|
else
|
|
return -EINVAL;
|
|
|
|
/* setup PLL filter */
|
|
switch (params->u.ofdm.bandwidth) {
|
|
case BANDWIDTH_6_MHZ:
|
|
filter = 0;
|
|
break;
|
|
|
|
case BANDWIDTH_7_MHZ:
|
|
filter = 0;
|
|
break;
|
|
|
|
case BANDWIDTH_8_MHZ:
|
|
filter = 1;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* calculate divisor
|
|
* ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
|
|
*/
|
|
tuner_frequency = (((params->frequency / 1000) * 6) + 217496) / 1000;
|
|
|
|
/* setup tuner buffer */
|
|
tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
|
|
tuner_buf[1] = tuner_frequency & 0xff;
|
|
tuner_buf[2] = 0xca;
|
|
tuner_buf[3] = (cp << 5) | (filter << 3) | band;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
return -EIO;
|
|
msleep(1);
|
|
return 0;
|
|
}
|
|
|
|
static int philips_tda6651_pll_init(u8 addr, struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
|
|
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
|
|
|
|
/* setup PLL configuration */
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
return -EIO;
|
|
msleep(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int philips_tu1216_tuner_60_init(struct dvb_frontend *fe)
|
|
{
|
|
return philips_tda6651_pll_init(0x60, fe);
|
|
}
|
|
|
|
static int philips_tu1216_tuner_60_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
return philips_tda6651_pll_set(0x60, fe, params);
|
|
}
|
|
|
|
static int philips_tu1216_request_firmware(struct dvb_frontend *fe,
|
|
const struct firmware **fw, char *name)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
return request_firmware(fw, name, &dev->pci->dev);
|
|
}
|
|
|
|
static struct tda1004x_config philips_tu1216_60_config = {
|
|
|
|
.demod_address = 0x8,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_4M,
|
|
.agc_config = TDA10046_AGC_DEFAULT,
|
|
.if_freq = TDA10046_FREQ_3617,
|
|
.request_firmware = philips_tu1216_request_firmware,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int philips_tu1216_tuner_61_init(struct dvb_frontend *fe)
|
|
{
|
|
return philips_tda6651_pll_init(0x61, fe);
|
|
}
|
|
|
|
static int philips_tu1216_tuner_61_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
return philips_tda6651_pll_set(0x61, fe, params);
|
|
}
|
|
|
|
static struct tda1004x_config philips_tu1216_61_config = {
|
|
|
|
.demod_address = 0x8,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_4M,
|
|
.agc_config = TDA10046_AGC_DEFAULT,
|
|
.if_freq = TDA10046_FREQ_3617,
|
|
.request_firmware = philips_tu1216_request_firmware,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int philips_europa_tuner_init(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
|
|
struct i2c_msg init_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) };
|
|
|
|
/* setup PLL configuration */
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
|
|
return -EIO;
|
|
msleep(1);
|
|
|
|
/* switch the board to dvb mode */
|
|
init_msg.addr = 0x43;
|
|
init_msg.len = 0x02;
|
|
msg[0] = 0x00;
|
|
msg[1] = 0x40;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int philips_td1316_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
return philips_tda6651_pll_set(0x61, fe, params);
|
|
}
|
|
|
|
static int philips_europa_tuner_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
/* this message actually turns the tuner back to analog mode */
|
|
static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
|
|
struct i2c_msg analog_msg = {.addr = 0x61,.flags = 0,.buf = msg,.len = sizeof(msg) };
|
|
|
|
i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
|
|
msleep(1);
|
|
|
|
/* switch the board to analog mode */
|
|
analog_msg.addr = 0x43;
|
|
analog_msg.len = 0x02;
|
|
msg[0] = 0x00;
|
|
msg[1] = 0x14;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
|
|
return 0;
|
|
}
|
|
|
|
static int philips_europa_demod_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
|
|
if (dev->original_demod_sleep)
|
|
dev->original_demod_sleep(fe);
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
return 0;
|
|
}
|
|
|
|
static struct tda1004x_config philips_europa_config = {
|
|
|
|
.demod_address = 0x8,
|
|
.invert = 0,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_4M,
|
|
.agc_config = TDA10046_AGC_IFO_AUTO_POS,
|
|
.if_freq = TDA10046_FREQ_052,
|
|
.request_firmware = NULL,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int philips_fmd1216_tuner_init(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
/* this message is to set up ATC and ALC */
|
|
static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0xa0 };
|
|
struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
return -EIO;
|
|
msleep(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int philips_fmd1216_tuner_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
/* this message actually turns the tuner back to analog mode */
|
|
static u8 fmd1216_init[] = { 0x0b, 0xdc, 0x9c, 0x60 };
|
|
struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = fmd1216_init,.len = sizeof(fmd1216_init) };
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
|
|
msleep(1);
|
|
fmd1216_init[2] = 0x86;
|
|
fmd1216_init[3] = 0x54;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
|
|
msleep(1);
|
|
return 0;
|
|
}
|
|
|
|
static int philips_fmd1216_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
u8 tuner_buf[4];
|
|
struct i2c_msg tuner_msg = {.addr = 0x61,.flags = 0,.buf = tuner_buf,.len =
|
|
sizeof(tuner_buf) };
|
|
int tuner_frequency = 0;
|
|
int divider = 0;
|
|
u8 band, mode, cp;
|
|
|
|
/* determine charge pump */
|
|
tuner_frequency = params->frequency + 36130000;
|
|
if (tuner_frequency < 87000000)
|
|
return -EINVAL;
|
|
/* low band */
|
|
else if (tuner_frequency < 180000000) {
|
|
band = 1;
|
|
mode = 7;
|
|
cp = 0;
|
|
} else if (tuner_frequency < 195000000) {
|
|
band = 1;
|
|
mode = 6;
|
|
cp = 1;
|
|
/* mid band */
|
|
} else if (tuner_frequency < 366000000) {
|
|
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
band = 10;
|
|
} else {
|
|
band = 2;
|
|
}
|
|
mode = 7;
|
|
cp = 0;
|
|
} else if (tuner_frequency < 478000000) {
|
|
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
band = 10;
|
|
} else {
|
|
band = 2;
|
|
}
|
|
mode = 6;
|
|
cp = 1;
|
|
/* high band */
|
|
} else if (tuner_frequency < 662000000) {
|
|
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
band = 12;
|
|
} else {
|
|
band = 4;
|
|
}
|
|
mode = 7;
|
|
cp = 0;
|
|
} else if (tuner_frequency < 840000000) {
|
|
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
band = 12;
|
|
} else {
|
|
band = 4;
|
|
}
|
|
mode = 6;
|
|
cp = 1;
|
|
} else {
|
|
if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) {
|
|
band = 12;
|
|
} else {
|
|
band = 4;
|
|
}
|
|
mode = 7;
|
|
cp = 1;
|
|
|
|
}
|
|
/* calculate divisor */
|
|
/* ((36166000 + Finput) / 166666) rounded! */
|
|
divider = (tuner_frequency + 83333) / 166667;
|
|
|
|
/* setup tuner buffer */
|
|
tuner_buf[0] = (divider >> 8) & 0x7f;
|
|
tuner_buf[1] = divider & 0xff;
|
|
tuner_buf[2] = 0x80 | (cp << 6) | (mode << 3) | 4;
|
|
tuner_buf[3] = 0x40 | band;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static struct tda1004x_config medion_cardbus = {
|
|
.demod_address = 0x08,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_16M,
|
|
.agc_config = TDA10046_AGC_IFO_AUTO_NEG,
|
|
.if_freq = TDA10046_FREQ_3613,
|
|
.request_firmware = NULL,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
struct tda827x_data {
|
|
u32 lomax;
|
|
u8 spd;
|
|
u8 bs;
|
|
u8 bp;
|
|
u8 cp;
|
|
u8 gc3;
|
|
u8 div1p5;
|
|
};
|
|
|
|
static struct tda827x_data tda827x_dvbt[] = {
|
|
{ .lomax = 62000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
|
|
{ .lomax = 66000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 1},
|
|
{ .lomax = 76000000, .spd = 3, .bs = 1, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
|
|
{ .lomax = 84000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 3, .div1p5 = 0},
|
|
{ .lomax = 93000000, .spd = 3, .bs = 2, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 98000000, .spd = 3, .bs = 3, .bp = 0, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 109000000, .spd = 3, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 123000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
{ .lomax = 133000000, .spd = 2, .bs = 3, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
{ .lomax = 151000000, .spd = 2, .bs = 1, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 154000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 181000000, .spd = 2, .bs = 2, .bp = 1, .cp = 0, .gc3 = 0, .div1p5 = 0},
|
|
{ .lomax = 185000000, .spd = 2, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 217000000, .spd = 2, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 244000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
{ .lomax = 265000000, .spd = 1, .bs = 3, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
{ .lomax = 302000000, .spd = 1, .bs = 1, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 324000000, .spd = 1, .bs = 2, .bp = 2, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 370000000, .spd = 1, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 454000000, .spd = 1, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 493000000, .spd = 0, .bs = 2, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
{ .lomax = 530000000, .spd = 0, .bs = 3, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 1},
|
|
{ .lomax = 554000000, .spd = 0, .bs = 1, .bp = 3, .cp = 0, .gc3 = 1, .div1p5 = 0},
|
|
{ .lomax = 604000000, .spd = 0, .bs = 1, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
|
|
{ .lomax = 696000000, .spd = 0, .bs = 2, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
|
|
{ .lomax = 740000000, .spd = 0, .bs = 2, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
|
|
{ .lomax = 820000000, .spd = 0, .bs = 3, .bp = 4, .cp = 0, .gc3 = 0, .div1p5 = 0},
|
|
{ .lomax = 865000000, .spd = 0, .bs = 3, .bp = 4, .cp = 1, .gc3 = 0, .div1p5 = 0},
|
|
{ .lomax = 0, .spd = 0, .bs = 0, .bp = 0, .cp = 0, .gc3 = 0, .div1p5 = 0}
|
|
};
|
|
|
|
static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int philips_tda827x_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
u8 tuner_buf[14];
|
|
|
|
struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tuner_buf,
|
|
.len = sizeof(tuner_buf) };
|
|
int i, tuner_freq, if_freq;
|
|
u32 N;
|
|
switch (params->u.ofdm.bandwidth) {
|
|
case BANDWIDTH_6_MHZ:
|
|
if_freq = 4000000;
|
|
break;
|
|
case BANDWIDTH_7_MHZ:
|
|
if_freq = 4500000;
|
|
break;
|
|
default: /* 8 MHz or Auto */
|
|
if_freq = 5000000;
|
|
break;
|
|
}
|
|
tuner_freq = params->frequency + if_freq;
|
|
|
|
i = 0;
|
|
while (tda827x_dvbt[i].lomax < tuner_freq) {
|
|
if(tda827x_dvbt[i + 1].lomax == 0)
|
|
break;
|
|
i++;
|
|
}
|
|
|
|
N = ((tuner_freq + 125000) / 250000) << (tda827x_dvbt[i].spd + 2);
|
|
tuner_buf[0] = 0;
|
|
tuner_buf[1] = (N>>8) | 0x40;
|
|
tuner_buf[2] = N & 0xff;
|
|
tuner_buf[3] = 0;
|
|
tuner_buf[4] = 0x52;
|
|
tuner_buf[5] = (tda827x_dvbt[i].spd << 6) + (tda827x_dvbt[i].div1p5 << 5) +
|
|
(tda827x_dvbt[i].bs << 3) + tda827x_dvbt[i].bp;
|
|
tuner_buf[6] = (tda827x_dvbt[i].gc3 << 4) + 0x8f;
|
|
tuner_buf[7] = 0xbf;
|
|
tuner_buf[8] = 0x2a;
|
|
tuner_buf[9] = 0x05;
|
|
tuner_buf[10] = 0xff;
|
|
tuner_buf[11] = 0x00;
|
|
tuner_buf[12] = 0x00;
|
|
tuner_buf[13] = 0x40;
|
|
|
|
tuner_msg.len = 14;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
|
|
return -EIO;
|
|
|
|
msleep(500);
|
|
/* correct CP value */
|
|
tuner_buf[0] = 0x30;
|
|
tuner_buf[1] = 0x50 + tda827x_dvbt[i].cp;
|
|
tuner_msg.len = 2;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
static u8 tda827x_sleep[] = { 0x30, 0xd0};
|
|
struct i2c_msg tuner_msg = {.addr = 0x60,.flags = 0,.buf = tda827x_sleep,
|
|
.len = sizeof(tda827x_sleep) };
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
|
|
return 0;
|
|
}
|
|
|
|
static struct tda1004x_config tda827x_lifeview_config = {
|
|
.demod_address = 0x08,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_16M,
|
|
.agc_config = TDA10046_AGC_TDA827X,
|
|
.if_freq = TDA10046_FREQ_045,
|
|
.request_firmware = NULL,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
struct tda827xa_data {
|
|
u32 lomax;
|
|
u8 svco;
|
|
u8 spd;
|
|
u8 scr;
|
|
u8 sbs;
|
|
u8 gc3;
|
|
};
|
|
|
|
static struct tda827xa_data tda827xa_dvbt[] = {
|
|
{ .lomax = 56875000, .svco = 3, .spd = 4, .scr = 0, .sbs = 0, .gc3 = 1},
|
|
{ .lomax = 67250000, .svco = 0, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1},
|
|
{ .lomax = 81250000, .svco = 1, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1},
|
|
{ .lomax = 97500000, .svco = 2, .spd = 3, .scr = 0, .sbs = 0, .gc3 = 1},
|
|
{ .lomax = 113750000, .svco = 3, .spd = 3, .scr = 0, .sbs = 1, .gc3 = 1},
|
|
{ .lomax = 134500000, .svco = 0, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
|
|
{ .lomax = 154000000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
|
|
{ .lomax = 162500000, .svco = 1, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
|
|
{ .lomax = 183000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 1, .gc3 = 1},
|
|
{ .lomax = 195000000, .svco = 2, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1},
|
|
{ .lomax = 227500000, .svco = 3, .spd = 2, .scr = 0, .sbs = 2, .gc3 = 1},
|
|
{ .lomax = 269000000, .svco = 0, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1},
|
|
{ .lomax = 290000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 2, .gc3 = 1},
|
|
{ .lomax = 325000000, .svco = 1, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1},
|
|
{ .lomax = 390000000, .svco = 2, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1},
|
|
{ .lomax = 455000000, .svco = 3, .spd = 1, .scr = 0, .sbs = 3, .gc3 = 1},
|
|
{ .lomax = 520000000, .svco = 0, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1},
|
|
{ .lomax = 538000000, .svco = 0, .spd = 0, .scr = 1, .sbs = 3, .gc3 = 1},
|
|
{ .lomax = 550000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 3, .gc3 = 1},
|
|
{ .lomax = 620000000, .svco = 1, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
|
|
{ .lomax = 650000000, .svco = 1, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
|
|
{ .lomax = 700000000, .svco = 2, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
|
|
{ .lomax = 780000000, .svco = 2, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
|
|
{ .lomax = 820000000, .svco = 3, .spd = 0, .scr = 0, .sbs = 4, .gc3 = 0},
|
|
{ .lomax = 870000000, .svco = 3, .spd = 0, .scr = 1, .sbs = 4, .gc3 = 0},
|
|
{ .lomax = 911000000, .svco = 3, .spd = 0, .scr = 2, .sbs = 4, .gc3 = 0},
|
|
{ .lomax = 0, .svco = 0, .spd = 0, .scr = 0, .sbs = 0, .gc3 = 0}};
|
|
|
|
|
|
static int philips_tda827xa_pll_set(u8 addr, struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
u8 tuner_buf[14];
|
|
unsigned char reg2[2];
|
|
|
|
struct i2c_msg msg = {.addr = addr,.flags = 0,.buf = tuner_buf};
|
|
int i, tuner_freq, if_freq;
|
|
u32 N;
|
|
|
|
switch (params->u.ofdm.bandwidth) {
|
|
case BANDWIDTH_6_MHZ:
|
|
if_freq = 4000000;
|
|
break;
|
|
case BANDWIDTH_7_MHZ:
|
|
if_freq = 4500000;
|
|
break;
|
|
default: /* 8 MHz or Auto */
|
|
if_freq = 5000000;
|
|
break;
|
|
}
|
|
tuner_freq = params->frequency + if_freq;
|
|
|
|
i = 0;
|
|
while (tda827xa_dvbt[i].lomax < tuner_freq) {
|
|
if(tda827xa_dvbt[i + 1].lomax == 0)
|
|
break;
|
|
i++;
|
|
}
|
|
|
|
N = ((tuner_freq + 31250) / 62500) << tda827xa_dvbt[i].spd;
|
|
tuner_buf[0] = 0; // subaddress
|
|
tuner_buf[1] = N >> 8;
|
|
tuner_buf[2] = N & 0xff;
|
|
tuner_buf[3] = 0;
|
|
tuner_buf[4] = 0x16;
|
|
tuner_buf[5] = (tda827xa_dvbt[i].spd << 5) + (tda827xa_dvbt[i].svco << 3) +
|
|
tda827xa_dvbt[i].sbs;
|
|
tuner_buf[6] = 0x4b + (tda827xa_dvbt[i].gc3 << 4);
|
|
tuner_buf[7] = 0x0c;
|
|
tuner_buf[8] = 0x06;
|
|
tuner_buf[9] = 0x24;
|
|
tuner_buf[10] = 0xff;
|
|
tuner_buf[11] = 0x60;
|
|
tuner_buf[12] = 0x00;
|
|
tuner_buf[13] = 0x39; // lpsel
|
|
msg.len = 14;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
|
|
return -EIO;
|
|
|
|
msg.buf= reg2;
|
|
msg.len = 2;
|
|
reg2[0] = 0x60;
|
|
reg2[1] = 0x3c;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
|
|
|
reg2[0] = 0xa0;
|
|
reg2[1] = 0x40;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
|
|
|
msleep(2);
|
|
/* correct CP value */
|
|
reg2[0] = 0x30;
|
|
reg2[1] = 0x10 + tda827xa_dvbt[i].scr;
|
|
msg.len = 2;
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
|
|
|
msleep(550);
|
|
reg2[0] = 0x50;
|
|
reg2[1] = 0x4f + (tda827xa_dvbt[i].gc3 << 4);
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int philips_tda827xa_tuner_sleep(u8 addr, struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
static u8 tda827xa_sleep[] = { 0x30, 0x90};
|
|
struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tda827xa_sleep,
|
|
.len = sizeof(tda827xa_sleep) };
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1);
|
|
i2c_transfer(&dev->i2c_adap, &tuner_msg, 1);
|
|
return 0;
|
|
}
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int philips_tiger_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
int ret;
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
static u8 tda8290_close[] = { 0x21, 0xc0};
|
|
static u8 tda8290_open[] = { 0x21, 0x80};
|
|
struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2};
|
|
|
|
/* close tda8290 i2c bridge */
|
|
tda8290_msg.buf = tda8290_close;
|
|
ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
|
|
if (ret != 1)
|
|
return -EIO;
|
|
msleep(20);
|
|
ret = philips_tda827xa_pll_set(0x61, fe, params);
|
|
if (ret != 0)
|
|
return ret;
|
|
/* open tda8290 i2c bridge */
|
|
tda8290_msg.buf = tda8290_open;
|
|
i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
|
|
return ret;
|
|
}
|
|
|
|
static int philips_tiger_tuner_init(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
static u8 data[] = { 0x3c, 0x33, 0x6a};
|
|
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
|
|
|
|
if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static int philips_tiger_tuner_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
static u8 data[] = { 0x3c, 0x33, 0x68};
|
|
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
|
|
|
|
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
|
philips_tda827xa_tuner_sleep( 0x61, fe);
|
|
return 0;
|
|
}
|
|
|
|
static struct tda1004x_config philips_tiger_config = {
|
|
.demod_address = 0x08,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_16M,
|
|
.agc_config = TDA10046_AGC_TDA827X,
|
|
.if_freq = TDA10046_FREQ_045,
|
|
.request_firmware = NULL,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int lifeview_trio_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
int ret;
|
|
|
|
ret = philips_tda827xa_pll_set(0x60, fe, params);
|
|
return ret;
|
|
}
|
|
|
|
static int lifeview_trio_tuner_sleep(struct dvb_frontend *fe)
|
|
{
|
|
philips_tda827xa_tuner_sleep(0x60, fe);
|
|
return 0;
|
|
}
|
|
|
|
static struct tda1004x_config lifeview_trio_config = {
|
|
.demod_address = 0x09,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_16M,
|
|
.agc_config = TDA10046_AGC_TDA827X_GPL,
|
|
.if_freq = TDA10046_FREQ_045,
|
|
.request_firmware = NULL,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int ads_duo_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
int ret;
|
|
|
|
ret = philips_tda827xa_pll_set(0x61, fe, params);
|
|
return ret;
|
|
}
|
|
|
|
static int ads_duo_tuner_init(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
/* route TDA8275a AGC input to the channel decoder */
|
|
saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x60);
|
|
return 0;
|
|
}
|
|
|
|
static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
/* route TDA8275a AGC input to the analog IF chip*/
|
|
saa_writeb(SAA7134_GPIO_GPSTATUS2, 0x20);
|
|
philips_tda827xa_tuner_sleep( 0x61, fe);
|
|
return 0;
|
|
}
|
|
|
|
static struct tda1004x_config ads_tech_duo_config = {
|
|
.demod_address = 0x08,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_16M,
|
|
.agc_config = TDA10046_AGC_TDA827X_GPL,
|
|
.if_freq = TDA10046_FREQ_045,
|
|
.request_firmware = NULL,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int tevion_dvb220rf_tuner_set_params(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
int ret;
|
|
ret = philips_tda827xa_pll_set(0x60, fe, params);
|
|
return ret;
|
|
}
|
|
|
|
static int tevion_dvb220rf_tuner_sleep(struct dvb_frontend *fe)
|
|
{
|
|
philips_tda827xa_tuner_sleep( 0x61, fe);
|
|
return 0;
|
|
}
|
|
|
|
static struct tda1004x_config tevion_dvbt220rf_config = {
|
|
.demod_address = 0x08,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_16M,
|
|
.agc_config = TDA10046_AGC_TDA827X,
|
|
.if_freq = TDA10046_FREQ_045,
|
|
.request_firmware = NULL,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int md8800_dvbt_analog_mode(struct dvb_frontend *fe)
|
|
{
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
static u8 data[] = { 0x3c, 0x33, 0x68};
|
|
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
|
|
|
|
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
|
philips_tda827xa_tuner_sleep( 0x61, fe);
|
|
return 0;
|
|
}
|
|
|
|
static int md8800_dvbt_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
|
|
{
|
|
int ret;
|
|
struct saa7134_dev *dev = fe->dvb->priv;
|
|
static u8 tda8290_close[] = { 0x21, 0xc0};
|
|
static u8 tda8290_open[] = { 0x21, 0x80};
|
|
struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2};
|
|
/* close tda8290 i2c bridge */
|
|
tda8290_msg.buf = tda8290_close;
|
|
ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
|
|
if (ret != 1)
|
|
return -EIO;
|
|
msleep(20);
|
|
ret = philips_tda827xa_pll_set(0x60, fe, params);
|
|
if (ret != 0)
|
|
return ret;
|
|
/* open tda8290 i2c bridge */
|
|
tda8290_msg.buf = tda8290_open;
|
|
i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
|
|
return ret;
|
|
}
|
|
|
|
static struct tda1004x_config md8800_dvbt_config = {
|
|
.demod_address = 0x08,
|
|
.invert = 1,
|
|
.invert_oclk = 0,
|
|
.xtal_freq = TDA10046_XTAL_16M,
|
|
.agc_config = TDA10046_AGC_TDA827X,
|
|
.if_freq = TDA10046_FREQ_045,
|
|
.request_firmware = NULL,
|
|
};
|
|
|
|
static struct tda10086_config flydvbs = {
|
|
.demod_address = 0x0e,
|
|
.invert = 0,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static struct nxt200x_config avertvhda180 = {
|
|
.demod_address = 0x0a,
|
|
};
|
|
|
|
static int nxt200x_set_pll_input(u8 *buf, int input)
|
|
{
|
|
if (input)
|
|
buf[3] |= 0x08;
|
|
else
|
|
buf[3] &= ~0x08;
|
|
return 0;
|
|
}
|
|
|
|
static struct nxt200x_config kworldatsc110 = {
|
|
.demod_address = 0x0a,
|
|
.set_pll_input = nxt200x_set_pll_input,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
|
|
static int dvb_init(struct saa7134_dev *dev)
|
|
{
|
|
/* init struct videobuf_dvb */
|
|
dev->ts.nr_bufs = 32;
|
|
dev->ts.nr_packets = 32*4;
|
|
dev->dvb.name = dev->name;
|
|
videobuf_queue_init(&dev->dvb.dvbq, &saa7134_ts_qops,
|
|
dev->pci, &dev->slock,
|
|
V4L2_BUF_TYPE_VIDEO_CAPTURE,
|
|
V4L2_FIELD_ALTERNATE,
|
|
sizeof(struct saa7134_buf),
|
|
dev);
|
|
|
|
switch (dev->board) {
|
|
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
|
|
printk("%s: pinnacle 300i dvb setup\n",dev->name);
|
|
dev->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_AVERMEDIA_777:
|
|
case SAA7134_BOARD_AVERMEDIA_A16AR:
|
|
printk("%s: avertv 777 dvb setup\n",dev->name);
|
|
dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.calc_regs = mt352_aver777_tuner_calc_regs;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_MD7134:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&medion_cardbus,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_fmd1216_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = philips_fmd1216_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_fmd1216_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_PHILIPS_TOUGH:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&philips_tu1216_60_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_tuner_60_init;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tu1216_tuner_60_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_FLYDVBTDUO:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&tda827x_lifeview_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&tda827x_lifeview_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_PHILIPS_EUROPA:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&philips_europa_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->original_demod_sleep = dev->dvb.frontend->ops.sleep;
|
|
dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&philips_europa_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_VIDEOMATE_DVBT_200:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&philips_tu1216_61_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_tu1216_tuner_61_init;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tu1216_tuner_61_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_PHILIPS_TIGER:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&philips_tiger_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&philips_tiger_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_FLYDVBT_LR301:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&tda827x_lifeview_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_tda827x_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = philips_tda827x_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tda827x_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_FLYDVB_TRIO:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&lifeview_trio_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = lifeview_trio_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = lifeview_trio_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&ads_tech_duo_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = ads_duo_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = ads_duo_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = ads_duo_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_TEVION_DVBT_220RF:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&tevion_dvbt220rf_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = tevion_dvb220rf_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = tevion_dvb220rf_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
|
|
dev->dvb.frontend = dvb_attach(tda10046_attach,
|
|
&ads_tech_duo_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = ads_duo_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = ads_duo_tuner_sleep;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = ads_duo_tuner_set_params;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
|
|
dev->dvb.frontend = tda10046_attach(&md8800_dvbt_config,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
|
|
dev->dvb.frontend->ops.tuner_ops.sleep = md8800_dvbt_analog_mode;
|
|
dev->dvb.frontend->ops.tuner_ops.set_params = md8800_dvbt_pll_set;
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
|
|
dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
|
|
NULL, &dvb_pll_tdhu2);
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_KWORLD_ATSC110:
|
|
dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
|
|
NULL, &dvb_pll_tuv1236d);
|
|
}
|
|
break;
|
|
case SAA7134_BOARD_FLYDVBS_LR300:
|
|
dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
|
|
&dev->i2c_adap);
|
|
if (dev->dvb.frontend) {
|
|
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
|
|
&dev->i2c_adap, 0) == NULL) {
|
|
printk("%s: No tda826x found!\n", __FUNCTION__);
|
|
}
|
|
if (dvb_attach(isl6421_attach, dev->dvb.frontend,
|
|
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
|
|
printk("%s: No ISL6421 found!\n", __FUNCTION__);
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
printk("%s: Huh? unknown DVB card?\n",dev->name);
|
|
break;
|
|
}
|
|
|
|
if (NULL == dev->dvb.frontend) {
|
|
printk("%s: frontend initialization failed\n",dev->name);
|
|
return -1;
|
|
}
|
|
|
|
/* register everything else */
|
|
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev, &dev->pci->dev);
|
|
}
|
|
|
|
static int dvb_fini(struct saa7134_dev *dev)
|
|
{
|
|
static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
|
|
|
|
switch (dev->board) {
|
|
case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
|
|
/* otherwise we don't detect the tuner on next insmod */
|
|
saa7134_i2c_call_clients(dev,TDA9887_SET_CONFIG,&on);
|
|
break;
|
|
};
|
|
videobuf_dvb_unregister(&dev->dvb);
|
|
return 0;
|
|
}
|
|
|
|
static struct saa7134_mpeg_ops dvb_ops = {
|
|
.type = SAA7134_MPEG_DVB,
|
|
.init = dvb_init,
|
|
.fini = dvb_fini,
|
|
};
|
|
|
|
static int __init dvb_register(void)
|
|
{
|
|
return saa7134_ts_register(&dvb_ops);
|
|
}
|
|
|
|
static void __exit dvb_unregister(void)
|
|
{
|
|
saa7134_ts_unregister(&dvb_ops);
|
|
}
|
|
|
|
module_init(dvb_register);
|
|
module_exit(dvb_unregister);
|
|
|
|
/* ------------------------------------------------------------------ */
|
|
/*
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
*/
|