asgardius/android_kernel_motorola_sm6225
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_motorola_sm6225/sound/soc/pxa/pxa2xx-ac97.c
Eric Miao 7053acbd78 [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX 
This patch removes the unnecessary bit number from CKENnn_XXXX
definitions for PXA, so that

	CKEN0_PWM0 --> CKEN_PWM0
	CKEN1_PWM1 --> CKEN_PWM1
	...
	CKEN24_CAMERA --> CKEN_CAMERA

The reasons for the change of these defitions are:

1. they do not scale - they are currently valid for pxa2xx, but
definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera
instead of bit 24

2. they are unnecessary - the peripheral name within the definition
has already announced its usage, we don't need those bit numbers
to know which peripheral we are going to enable/disable clock for

3. they are inconvenient - think about this: a driver programmer
for pxa has to remember which bit in the CKEN register to turn
on/off

Another change in the patch is to make the definitions equal to its
clock bit index, so that

   #define CKEN_CAMERA  (24)

instead of

   #define CKEN_CAMERA  (1 << 24)

this change, however, will add a run-time bit shift operation in
pxa_set_cken(), but the benefit of this change is that it scales
when bit index exceeds 32, e.g., pxa3xx has two registers CKENA
and CKENB, totally 64 bit for this, suppose CAMERA clock enabling
bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10)
and so that pxa_set_cken() need minimum change to adapt to that.

Signed-off-by: eric miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21 23:14:01 +01:00

431 lines
11 KiB
C
Raw Blame History

/*
* linux/sound/pxa2xx-ac97.c -- AC97 support for the Intel PXA2xx chip.
*
* Author: Nicolas Pitre
* Created: Dec 02, 2004
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/delay.h>
#include <sound/driver.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/ac97_codec.h>
#include <sound/initval.h>
#include <sound/soc.h>
#include <asm/irq.h>
#include <linux/mutex.h>
#include <asm/hardware.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/audio.h>
#include "pxa2xx-pcm.h"
#include "pxa2xx-ac97.h"
static DEFINE_MUTEX(car_mutex);
static DECLARE_WAIT_QUEUE_HEAD(gsr_wq);
static volatile long gsr_bits;
/*
* Beware PXA27x bugs:
*
* o Slot 12 read from modem space will hang controller.
* o CDONE, SDONE interrupt fails after any slot 12 IO.
*
* We therefore have an hybrid approach for waiting on SDONE (interrupt or
* 1 jiffy timeout if interrupt never comes).
*/
static unsigned short pxa2xx_ac97_read(struct snd_ac97 *ac97,
unsigned short reg)
{
unsigned short val = -1;
volatile u32 *reg_addr;
mutex_lock(&car_mutex);
/* set up primary or secondary codec/modem space */
#ifdef CONFIG_PXA27x
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
#else
if (reg == AC97_GPIO_STATUS)
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
else
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
#endif
reg_addr += (reg >> 1);
#ifndef CONFIG_PXA27x
if (reg == AC97_GPIO_STATUS) {
/* read from controller cache */
val = *reg_addr;
goto out;
}
#endif
/* start read access across the ac97 link */
GSR = GSR_CDONE | GSR_SDONE;
gsr_bits = 0;
val = *reg_addr;
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
if (!((GSR | gsr_bits) & GSR_SDONE)) {
printk(KERN_ERR "%s: read error (ac97_reg=%x GSR=%#lx)\n",
__FUNCTION__, reg, GSR | gsr_bits);
val = -1;
goto out;
}
/* valid data now */
GSR = GSR_CDONE | GSR_SDONE;
gsr_bits = 0;
val = *reg_addr;
/* but we've just started another cycle... */
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_SDONE, 1);
out: mutex_unlock(&car_mutex);
return val;
}
static void pxa2xx_ac97_write(struct snd_ac97 *ac97, unsigned short reg,
unsigned short val)
{
volatile u32 *reg_addr;
mutex_lock(&car_mutex);
/* set up primary or secondary codec/modem space */
#ifdef CONFIG_PXA27x
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
#else
if (reg == AC97_GPIO_STATUS)
reg_addr = ac97->num ? &SMC_REG_BASE : &PMC_REG_BASE;
else
reg_addr = ac97->num ? &SAC_REG_BASE : &PAC_REG_BASE;
#endif
reg_addr += (reg >> 1);
GSR = GSR_CDONE | GSR_SDONE;
gsr_bits = 0;
*reg_addr = val;
wait_event_timeout(gsr_wq, (GSR | gsr_bits) & GSR_CDONE, 1);
if (!((GSR | gsr_bits) & GSR_CDONE))
printk(KERN_ERR "%s: write error (ac97_reg=%x GSR=%#lx)\n",
__FUNCTION__, reg, GSR | gsr_bits);
mutex_unlock(&car_mutex);
}
static void pxa2xx_ac97_warm_reset(struct snd_ac97 *ac97)
{
gsr_bits = 0;
#ifdef CONFIG_PXA27x
/* warm reset broken on Bulverde,
so manually keep AC97 reset high */
pxa_gpio_mode(113 | GPIO_OUT | GPIO_DFLT_HIGH);
udelay(10);
GCR |= GCR_WARM_RST;
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
udelay(500);
#else
GCR |= GCR_WARM_RST | GCR_PRIRDY_IEN | GCR_SECRDY_IEN;
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
#endif
if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
__FUNCTION__, gsr_bits);
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
}
static void pxa2xx_ac97_cold_reset(struct snd_ac97 *ac97)
{
GCR &= GCR_COLD_RST; /* clear everything but nCRST */
GCR &= ~GCR_COLD_RST; /* then assert nCRST */
gsr_bits = 0;
#ifdef CONFIG_PXA27x
/* PXA27x Developers Manual section 13.5.2.2.1 */
pxa_set_cken(1 << 31, 1);
udelay(5);
pxa_set_cken(1 << 31, 0);
GCR = GCR_COLD_RST;
udelay(50);
#else
GCR = GCR_COLD_RST;
GCR |= GCR_CDONE_IE|GCR_SDONE_IE;
wait_event_timeout(gsr_wq, gsr_bits & (GSR_PCR | GSR_SCR), 1);
#endif
if (!((GSR | gsr_bits) & (GSR_PCR | GSR_SCR)))
printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
__FUNCTION__, gsr_bits);
GCR &= ~(GCR_PRIRDY_IEN|GCR_SECRDY_IEN);
GCR |= GCR_SDONE_IE|GCR_CDONE_IE;
}
static irqreturn_t pxa2xx_ac97_irq(int irq, void *dev_id)
{
long status;
status = GSR;
if (status) {
GSR = status;
gsr_bits |= status;
wake_up(&gsr_wq);
#ifdef CONFIG_PXA27x
/* Although we don't use those we still need to clear them
since they tend to spuriously trigger when MMC is used
(hardware bug? go figure)... */
MISR = MISR_EOC;
PISR = PISR_EOC;
MCSR = MCSR_EOC;
#endif
return IRQ_HANDLED;
}
return IRQ_NONE;
}
struct snd_ac97_bus_ops soc_ac97_ops = {
.read = pxa2xx_ac97_read,
.write = pxa2xx_ac97_write,
.warm_reset = pxa2xx_ac97_warm_reset,
.reset = pxa2xx_ac97_cold_reset,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_out = {
.name = "AC97 PCM Stereo out",
.dev_addr = __PREG(PCDR),
.drcmr = &DRCMRTXPCDR,
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST32 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_stereo_in = {
.name = "AC97 PCM Stereo in",
.dev_addr = __PREG(PCDR),
.drcmr = &DRCMRRXPCDR,
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST32 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_out = {
.name = "AC97 Aux PCM (Slot 5) Mono out",
.dev_addr = __PREG(MODR),
.drcmr = &DRCMRTXMODR,
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_aux_mono_in = {
.name = "AC97 Aux PCM (Slot 5) Mono in",
.dev_addr = __PREG(MODR),
.drcmr = &DRCMRRXMODR,
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa2xx_ac97_pcm_mic_mono_in = {
.name = "AC97 Mic PCM (Slot 6) Mono in",
.dev_addr = __PREG(MCDR),
.drcmr = &DRCMRRXMCDR,
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
#ifdef CONFIG_PM
static int pxa2xx_ac97_suspend(struct platform_device *pdev,
struct snd_soc_cpu_dai *dai)
{
GCR |= GCR_ACLINK_OFF;
pxa_set_cken(CKEN_AC97, 0);
return 0;
}
static int pxa2xx_ac97_resume(struct platform_device *pdev,
struct snd_soc_cpu_dai *dai)
{
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
#ifdef CONFIG_PXA27x
/* Use GPIO 113 as AC97 Reset on Bulverde */
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
#endif
pxa_set_cken(CKEN_AC97, 1);
return 0;
}
#else
#define pxa2xx_ac97_suspend NULL
#define pxa2xx_ac97_resume NULL
#endif
static int pxa2xx_ac97_probe(struct platform_device *pdev)
{
int ret;
ret = request_irq(IRQ_AC97, pxa2xx_ac97_irq, IRQF_DISABLED, "AC97", NULL);
if (ret < 0)
goto err;
pxa_gpio_mode(GPIO31_SYNC_AC97_MD);
pxa_gpio_mode(GPIO30_SDATA_OUT_AC97_MD);
pxa_gpio_mode(GPIO28_BITCLK_AC97_MD);
pxa_gpio_mode(GPIO29_SDATA_IN_AC97_MD);
#ifdef CONFIG_PXA27x
/* Use GPIO 113 as AC97 Reset on Bulverde */
pxa_gpio_mode(113 | GPIO_ALT_FN_2_OUT);
#endif
pxa_set_cken(CKEN_AC97, 1);
return 0;
err:
if (CKEN & CKEN_AC97) {
GCR |= GCR_ACLINK_OFF;
free_irq(IRQ_AC97, NULL);
pxa_set_cken(CKEN_AC97, 0);
}
return ret;
}
static void pxa2xx_ac97_remove(struct platform_device *pdev)
{
GCR |= GCR_ACLINK_OFF;
free_irq(IRQ_AC97, NULL);
pxa_set_cken(CKEN_AC97, 0);
}
static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_out;
else
cpu_dai->dma_data = &pxa2xx_ac97_pcm_stereo_in;
return 0;
}
static int pxa2xx_ac97_hw_aux_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_out;
else
cpu_dai->dma_data = &pxa2xx_ac97_pcm_aux_mono_in;
return 0;
}
static int pxa2xx_ac97_hw_mic_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_cpu_dai *cpu_dai = rtd->dai->cpu_dai;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
return -ENODEV;
else
cpu_dai->dma_data = &pxa2xx_ac97_pcm_mic_mono_in;
return 0;
}
#define PXA2XX_AC97_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000)
/*
* There is only 1 physical AC97 interface for pxa2xx, but it
* has extra fifo's that can be used for aux DACs and ADCs.
*/
struct snd_soc_cpu_dai pxa_ac97_dai[] = {
{
.name = "pxa2xx-ac97",
.id = 0,
.type = SND_SOC_DAI_AC97,
.probe = pxa2xx_ac97_probe,
.remove = pxa2xx_ac97_remove,
.suspend = pxa2xx_ac97_suspend,
.resume = pxa2xx_ac97_resume,
.playback = {
.stream_name = "AC97 Playback",
.channels_min = 2,
.channels_max = 2,
.rates = PXA2XX_AC97_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.capture = {
.stream_name = "AC97 Capture",
.channels_min = 2,
.channels_max = 2,
.rates = PXA2XX_AC97_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.ops = {
.hw_params = pxa2xx_ac97_hw_params,},
},
{
.name = "pxa2xx-ac97-aux",
.id = 1,
.type = SND_SOC_DAI_AC97,
.playback = {
.stream_name = "AC97 Aux Playback",
.channels_min = 1,
.channels_max = 1,
.rates = PXA2XX_AC97_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.capture = {
.stream_name = "AC97 Aux Capture",
.channels_min = 1,
.channels_max = 1,
.rates = PXA2XX_AC97_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.ops = {
.hw_params = pxa2xx_ac97_hw_aux_params,},
},
{
.name = "pxa2xx-ac97-mic",
.id = 2,
.type = SND_SOC_DAI_AC97,
.capture = {
.stream_name = "AC97 Mic Capture",
.channels_min = 1,
.channels_max = 1,
.rates = PXA2XX_AC97_RATES,
.formats = SNDRV_PCM_FMTBIT_S16_LE,},
.ops = {
.hw_params = pxa2xx_ac97_hw_mic_params,},
},
};
EXPORT_SYMBOL_GPL(pxa_ac97_dai);
EXPORT_SYMBOL_GPL(soc_ac97_ops);
MODULE_AUTHOR("Nicolas Pitre");
MODULE_DESCRIPTION("AC97 driver for the Intel PXA2xx chip");
MODULE_LICENSE("GPL");
Reference in a new issue View git blame Copy permalink