726f1d1d73
hawao push for android 12 * tag 'MMI-S2SE32.28-28-4' of https://github.com/MotorolaMobilityLLC/kernel-msm: (4348 commits) Hawaii+ OLED: sim1+sim2+sd fast plugGing cause phone hang kernel/config: hawao: usb: sim1+sim2+sd fast plugGing cause phone hang shmem becomes bigger and bigger when launch apps driver/power: Add debug logs Hawao: Fix NFC power consumption in sleep mode. devon:charger bring up lib/iov_iter: initialize "flags" in new pipe_buffer BACKPORT: dmabuf: fix use-after-free of dmabuf's file->f_inode kernel:add bc12 detect channel definition Revert "(CR): drm: mipi: Disable the MIPI DSI commands 0x2E and 0x3E" devon4g: camera flash bringup sctp: add param size validation for SCTP_PARAM_SET_PRIMARY sctp: validate chunk size in __rcv_asconf_lookup sctp: add size validation when walking chunks sctp: validate from_addr_param return aio: fix use-after-free due to missing POLLFREE handling aio: keep poll requests on waitqueue until completed signalfd: use wake_up_pollfree() binder: use wake_up_pollfree() wait: add wake_up_pollfree() FROMGIT: binder: fix test regression due to sender_euid change UPSTREAM: binder: use cred instead of task for getsecid BACKPORT: binder: use cred instead of task for selinux checks UPSTREAM: binder: use euid from cred instead of using task arm64/defconfig: add devon extra configs USB: gadget: bRequestType is a bitfield, not a enum USB: gadget: zero allocate endpoint 0 buffers USB: gadget: detect too-big endpoint 0 requests hawao: devconfig: enable CHACHA20 crypto configs rhode: devconfig: enable CHACHA20 crypto configs regulator: Force shutdown all regulators when system power off. arm64: defconfig: Flash compatible TZ: Distinguishes encrypted and unencrypted TZ logs interfaces. TZ: Fix build err Hawaii+OLED:remove CONFIG_QCOM_FSA4480_I2C defconfig: Disable SLAB_MERGE. arm64/config:Enable Zram writeback on hawao Enable LZ4 on Rhode4G and Hawao dts: rhode: remove CONFIG_QCOM_FSA4480_I2C mm: zram: fix build error when zram wb disabled mm : zram fix swapcached issue on Zram Writeback fs:proc:abort reclaim once process goes to foreground ip_gre: add validation for csum_start arm64/config:Enable Zram writeback on Rhode kernel:add charger termination definition rhode:kernel: add wt6670 get firmware num node kernel/config:hawao:remove FTS TP config to use module kernel/input:hawao:update to use TP module ko kernel: remove wt6670 isp macro definition for user version kernel/config:hawao: add new FTS config to fix build error input/touchscreen: add ft3519 source config input/ft3519: hawao touch driver bringup Revert "(CR) hawaii OLED: visionox ft3519 touch drvier bringup" kernel: add wt6670 macro definition to control i2c nack QC3P:add iio channel definition Rhode: define CONFIG_CAMERA_FLASH_PWM display: Modify LDO driver initialization voltage compatibility Hawao: NFC Bringup(4) - driver hawaii OLED: visionox ft3519 touch drvier bringup kernel: qc3p wt6760 isp download function kernel:add ADC_GPIO3_DIV3 adc channel display/config: Add LDO driver config into the kernel. display: Load the regulator driver directly into the kernel. kernel: use orderly_poweroff when usb plugged out tty:diag:Move tty_flip_buffer_push out of spinlock Revert "tty:revert the tty update from qcom for moto tty_diag driver" kernel:dwc3 delay extcon module registeration ANDROID: xt_quota2: set usersize in xt_match registration object ANDROID: xt_quota2: clear quota2_log message before sending ANDROID: xt_quota2: remove trailing junk which might have a digit in it arm/defconfig: add hawao extra config usb:diag:revert the f_diag update from qcom for moto tty_diag driver tty:revert the tty update from qcom for moto tty_diag driver Enable samsung NFC driver integrate samsung RN4V NFC driver Rhode4G: wide camera bring up kernel: add charger gki kernel: change spi gpio for i2c gpio for charger Remove gpio3 from reserve list for rhode4g arm/defconfig: add rhode extra config [PATCH] f2fs: flush data when enabling checkpoint back [PATCH] f2fs: flush data when enabling checkpoint back Revert "(CR) guamp: emmc add ffu" Removing debug config [PATCH] qseecom: Call INIT_WORK() before flush_work() guamp: emmc add ffu Caprip: modify the actuator noise reduction work flow. Caprip: modify the actuator noise reduction work flow. APP data lost after first R upgrade Porting of (CR) replace WARN with pr_debug for IPA api (CR) Make NCM driver compatible with windows disable CONFIG_SLUB_DEBUG for user builds disable CONFIG_DEBUG_PANIC_ON_OOM in userdebug builds Include inlinecrypt at config.gz to fix Q->R upgrade usb: add xhci-hw-lpm-disable dt property support kernel:ram overwritten by TZ logs to cause random panics Caprip: Add start/stop vibrating notification to actuator. arm64: defconfig: Actuator noise reduction. kernel: driver/vibrator: diff vol for long/short vib skip ipa assert for debug build (patch 2) skip ipa assert for debug build limit ion cache size Revert "(CR) power: Add wakeup source in battery historian logGing" power: print active wakeup source before suspend. alarmtimer: add debug to identify alarmtimers charger:driver:fix non power off issue for factory kill. arm64/defconfig: Capri: open nfc driver for Capri arm64/defconfig: disable debug fs on user build charger:support typec high 2A current at non-turbo product arm/defconfig: enable CONFIG_DEBUG_LIST on R soc: qcom: service-locator: enlarge timeout value arm/defconfig: Caprip: init kernel deconfig arm/defconfig: Capri: init kernel deconfig Revert "Revert "msm: media: uapi: Redefine NV12 format with different alignment"" Revert "msm: media: uapi: Redefine NV12 format with different alignment" clear SDAM for new battery profile loading. disable DEBUG_PANIC_ON_OOM on 3G ram device driver:qg:enale QG_DEBUG_SOC. Charge: fix slab out of bounds risk charge: qc2.0 adapter charge slow charge: Handle QC2.0 charger vbus rise 12V BCL: Enable charge bcl feature arm: setup: support mem= memory limit arm: call idle notifiers in CPU idle charger:improve micro-b input current to 1.9A per HW Capri bring up kernel:distinguish type-c and microb cdp input setting disable SPLIT_RSS_COUNTING to fix zero RSS issue charger:add battery test mode support for cebu. spi: disable_depth > 0 when pm runtime get sync driver/spi: spi driver suspend changes kernel: panel_notifier: Add new panel notify event type mmc:host:sdhci:Fix host->claimer NULL pointer problem Change ION fill mark from 100M to 16M to reduce the Lost RAM arm/defconfig: cebu: init kernel deconfig NFC VEN pin startup and shutdown sequence disable watermark boost charge:Config DCP 2A charge current tune memory configs charger:limit typec high to medium when hvdcp disabled charger:support 2A dcp charger arm64/defconfig: enable external usb camera power: reset: Use warm reset for dload mode Update kernel config of userdebug on Guam/GuamP to improve performance charger:duplicated apsd detection at pmi632 expose ssr_reason to ss_ramdump SD: print SD interrupt log charger:SW_ICL do not used at moto charger:factory image charGing soc over 75% usb audio: Let the usb sound card index from 1 kernel:USB DRP connect debug accessory test charge: config: config batt NTC for bornr NA Kernel: add sys node for panel supplier gpu/drm: Create panelRegDA sysfs to expose panel's reg pwrkey: change printk level to output to console Reboot: trigger warm reset when receive hw_warmreset cmd disable CONFIG_DEBUG_CONSOLE_UNHASHED_POINTERS for sts test Revert (CR): power: smb5: Clear HDC AICL arm/defconfig: borneo: init kernel deconfig guam serials: remove kernel config for PASR Revert "mm, vmstat: hide /proc/pagetypeinfo from normal users" arm/defconfig: guam: init kernel deconfig arm/defconfig: add 32bit debug config defconfig.mk: add arch specific debug enable psi for guam guamp Revert "defconfig: disable MEMCG for bengal 32" Fix QC rebase issue for dual role sysfs access issue ion: display ion total size in debufs node ion: dmabuf improve debugfs kernel:support huawei p10 5A cable bengal:Enable dual role usb interface smb5:Add dual role class support in smb5 usb:Add dual role class support sdcardfs: don't depend on reserved_mb to check free space sdcardfs: check the free space before creating files sdcardfs: copy inode size while getting attributes remove nfc function for guam charger:allow APSD re-run at factory usb detection CONFIG_FPR_FPC disable for rebase fingerprint fix defconfig.mk: Don't force make defconfig gitignore: ignore dts link guamp: arm64/dtsi enable regulator_fixed_voltage power: Add wakeup source in battery historian logGing arm64/defconfig: enable softlockup panic for debug arm64/defconfig : enable NFC kernel:add OCP charger current limitation guam: add touch module support Revert "(CR): config: disable CONFIG_PANIC_ON_REFCOUNT_ERROR" arm64/defconfig: disable debug config config: disable CONFIG_PANIC_ON_REFCOUNT_ERROR arm64/configs: sm4250: Enable USB console tty: msm_geni_serial: Support the match() callback printk: Keep boot console on if enabled arm64/config: support UAS of usb storage arm64/defconfig: enable usbnet drivers usb:configfs:Set udc_name NULL if attach failed usb/dwc3: msm: Enable all Debug Logs gadget: bcdUSB version back to 2.0 when not SuperSpeed usb: configfs: synchronize the secure and udc_name state usb: configfs: skip unregister gadget in secure usb: gadget: f_mtp: Return error if count is negative usb: gadget: storage: Support READ_TOC for MacOS usb: configfs: Implement secure attribute usb: configfs: Reset the use_os_desc flag usb: mass_storage: Add support for SC_REBOOT usb: f_mtp: Handle OS descriptors only when bound config:remove unused smb1355 config guam: input add touch class support arm64/config: enable DIAG_OVER_TTY drivers: tty: add tty diag module char: diag: add write done sync function panel_notify: add api for touch state guam: defconfig: enable panel notifications video: Add panel_notifier framework drm: mipi: disable Elvss dim of HBM for MIPI DSI Add new macro MIPI_DSI_MSG_READ gpu/drm: Create sysfs to expose panel vendor infor drm: mipi: Disable the MIPI DSI commands 0x2E and 0x3E drm/dsi: Implement DCS set disp brightness 2bytes guam: input add drm support defconfig: bengal: enable pstore power: Add function to show active wakelocks power: suspend: Save snapshot of gpio, vreg when suspend PM/Suspend: Print wall time at suspend entry and exit - Do not unload prov TZ app. add system restart warm and panic mode printk: increase log buffer size to 2k qpnp-power-on: Print system timestamp on Power key event regulator: core: Add sysfs node for debug pinctrl: msm: Add sysfs node for debug watchdog_v2: export watchdog trigger pinctrl: pinctrl-msm: do not dump unallocated GPIOs of: conditional status property arm64/dt add kpanic modules kernel:moto charger/battery driver enable config:battery 10k ntc enable guamp: input add touch support input add touch support kernel:JK50 NTC 10K report wrong temp arm/defconfig: update debug option defconfig: enable CONFIG_MEMCG config defconfig: bengal: Add moto defconfigs msm-poweroff: Store restart reason power: pmic-voter: Export Interfaces Do not build moto config while building MSI kernel/config: Add Moto ext_config feature soc: qcom: kconfig opt to build moto dtbs msm: kgsl: Zap performance counters across context switches msm: kgsl: Add a sysfs node to control performance counter reads soc: qcom: socinfo: Add soc information for KhajeP and KhajeQ spi: spi-msm-geni: Put device to suspend if PM status is active cnss2: Handle event processing after shutdown cfg80211: Add support to advertize OCV support i2c: i2c-msm-v2: Set frequency parameters to INT and validate drivers: thermal: validate cdev sysfs state request before using it USB: f_fs: Fix disconnect check during ongoing IO msm: diag: fix copyright diag: Validate the dci client before sending dci packet drivers: soc: qcom: Initialize blocking notifier as per lockdep usb: gadget: u_audio: fix race condition on endpoint stop usb: gadget: u_audio: Free requests only after callback defconfig: Enable usb peripheral audio on SXR2130 msm: ADSPRPC: Fix to avoid Use after free in fastrpc_init_process clk: qcom: vdd-level: Update the vdd level for CX on Khaje msm: ipa3: Fix to validate the NAT table entries during NAT table init msm: synx: fix copyright clk: qcom: gpucc: Update the vdd level for CX on Khaje diag: Ensure dci entry is valid before sending the packet usb: pd: Process request message as soon as it is received mmc: sdhci-msm: Update the MGPI SW check to avoid irq timeout msm: kgsl: Perform cache flush on the pages obtained using get_user_pages() dfc: reset tx queue clk: qcom: gpucc: Add support for higher frequency for Khaje msm: ipa3: fix to cleanup the dma allocation clk: qcom: vdd-level: Update the VDD levels for Bengal/Khaje include: qcom,rpm-smd-regulator.h: Add SUPER_TURBO corner usb: gadget: qdss: Don't clear debug_inface_enabled upon unbind msm: adsprpc: Handle UAF in fastrpc debugfs read usb: gadget: f_hid: Fix unbind issues usb: gadget: f_uvc: Fix unbind issues msm: synx: remove synx handle details from logging clocksource/drivers/arm_arch_timer: Correct fault programming of CNTKCTL_EL1.EVNTI mmc: sdhci-msm: Ensure SD card power isn't ON when card removed msm: kgsl: Fix gpuaddr_in_range() to check upper bound clk: qcom: clk-alpha-pll: Update the steps to slew the Lucid PLL spi: spi-msm-geni: Protect from register access in suspend state spi: spi-msm-geni: Keep device to suspend if PM call fails regulator: qcom_pm8008-regulator: Avoid deadlock in OCP handling usb: gadget: f_uac1: Add support for UAC1 function tzlog: update struct to get normal and fatal diag logs firmware: qcom: Remove garbage characters from qsee log firmware: qcom: add enlarged qsee log support firmware: qcom: encrypted tz and qsee log support input: misc: qcom-power-on: Add support to log KPDPWR status tzlog: update struct to get normal and fatal diag logs firmware: qcom: Remove garbage characters from qsee log firmware: qcom: add enlarged qsee log support firmware: qcom: encrypted tz and qsee log support fs: crypto: Maintain reference count for class keys usb: pd: always log when state machine work is queued leds: qti-tri-led: remove LED_KEEP_TRIGGER flag usb: pd: add usbpd_dbg() in pd_send_msg() diag: Update log and event mask code ranges usb: gadget: Clear string index for RMNET drivers: usb: enable SET_REPORT through EP0 feature clk: qcom: debugcc: Remove gcc_pcnoc_mpu_cfg_ahb_clk for QM215 clk: qcom: debugcc: Remove im_sleep/xo_div4 for QM215 af_unix: fix garbage collect vs MSG_PEEK net: split out functions related to registering inflight socket files uapi: sound: add bt external sink delay parameter mhi: core: Increase RDDM timeout to 350ms msm: npu: remove asynchronous network execution support usb: max-3421: Prevent corruption of freed memory mmc: host: Add recovery_finish crypto vops seq_file: disallow extremely large seq buffer allocations dfc: hold wakelock while powersave timer is running diag: Avoid possible out of bound access while sending masks diag: Sanitize non-hdlc pkt length against buffer capacity diag: Allow DCI packets to be copied separately msm: gsi: Stop Channel support when in Flow Control State msm: kgsl: Signal fence only if last fence refcount was not put media: v4l2: Allow ioctl type of "U" for video devices like usb camera msm: adsprpc: Handle UAF in process shell memory cnss2: Check if firmware asserts before power off for CBC usb: gadget: cdev: Add single packet and dynamic buffer support for Rx path net: qrtr: Use radix_tree_iter_delete to delete tx flow ipa: Null persistent pointers after free net: qrtr: Cleanup flow control during DEL proc qdss_bridge: handle usb write done event net: qrtr: Cleanup flow control during remote socket release leds: qpnp-flash-v2: Add support for dynamic torch current update thermal: Update copyright info for ADC_TM driver net: qrtr: Converting DEL_PROC command to BYE command defconfig: Enable SPMI TEMP ALARM driver for SPF targets msm: ipa3: Fix to NULL terminate the header pointer in proc header table usb: dwc3: Prevent deadlock when wakeup happens through pwr event irq thermal: Read raw values for ADC_TM calibration channels qdss_bridge: fix stuck issue when driver remove media: uvcvideo: Use cached memory for USB transfers defconfig: Enable Novatek NT36xxx Touch for tron target cnss2: Dump PCIE SOC scratch registers along with mhi reg dumps ANDROID: mm: use raw seqcount variants in vm_write_* msm: kgsl: Update the IFPC power up reglist msm: ipa3: Add wait queue for the adpl msm: ipa3: Fix to unlock mutex before return cnss2: Update bound checks for sbl reg dumps to SRAM mem range cnss2: Fix the pbl log sram start address for QCA6490 defconfig: arm: msm: 8937-Turn on coresight configs arm: msm: Add support for coresight etr for 32 bit soc: qcom: memory_dump: Support ETB/ETR register dump defconfig: arm64: msm: 8937-Turn on coresight configs drivers: thermal: Update a variable type in QMI encode logic BACKPORT: dma-buf: Move dma_buf_release() from fops to dentry_ops power: smb1398-charger: Toggle UVLO for Slave CP on USB removal msm: npu: handle system shutdown/reboot event properly dma-mapping-fast: Fix iova address leak with non-zero scatterlist offset net: qrtr: Change error logging in callback defconfig: Enable PMIC related configs for MSM8937_32 defconfig: Enable PMIC related configs for MSM8937_64 defconfig: Enable Charger/LED/RTC configs for MSM8937_32go power: linear-charger: Report the correct battery status at SOC=0 power: charger/fg: Add charger/fg/bms drivers for QM215 defconfig: Enable ADC thermal and SPMI configs for SPF targets thermal: Modify qpnp_adc_tm driver for IIO framework thermal: qpnp-adc: Add snapshot of qpnp-adc-tm driver msm: ipa3: Queue nop desc again if it fails diag: Drop packets to avoid memory exhaustion msm-ipa: fix use-after-free of rt_tbl net: qualcomm: rmnet: enable support for cksumv3 serial: msm_geni_serial: Avoid port pointer access for earlyconsole case rpmsg: glink: Change error logging to avoid throttling USB: gadget: f_uvc: Enable more controls for CT and PU serial: msm_geni_serial: Reduce stale delay added in stop_rx_sequencer msm: kgsl: Add timeline traces msm: kgsl: Add software timelines serial: msm_geni_serial: Reduce stale delay added in stop_rx_sequencer usb: f_mtp: Limit MTP Tx req length to 16k for ChipIdea fuse: give wakeup hints to the scheduler wait: add wake_up_sync() msm: ipa: Fix to free up all pending EOB pages msm: kgsl: Add the user API definition for timelines Add support for new HSP version usb: dwc3: dwc3-msm: optimize perf vote work i2c: i2c-qcom-geni: Change the high and low time for SCL net: qrtr: fix a kernel-infoleak in qrtr_recvmsg() tty: Fix ->session locking msm: ipa3: increasing the uC interrupt timeout value msm: kgsl: Fix out of bound write in adreno_profile_submit_time diag: Update log and event mask code ranges soc: qcom: Set QOS only to silver cluster dwc3-msm: Move override usb speed functionality outside edev check cnss2: Update board data file name for certain RF chip ID platform: qpnp-revid: Add REVID support for PM8010 regulator: qcom_pm8008-regulator: add support for PMIC PM8010 regulator: qcom_pm8008: allow multiple PM8008 instances with unique names block: pm: Fix possible unbalanced nr_pending usb: f_mtp: Don't handle OS descriptors from MTP driver power: supply: qpnp-smb5: specify different ICL for QC2 9V/12V level phy: msm: usb: Check VBUS state before accessing registers in suspend phy: msm: usb: Fail suspend if psy_type is USB or USB_CDP USB: phy: msm: Apply DP pulse for CDP during bootup from sm_work msm: adsprpc: Allocate buffer taking NULL byte into consideration clk: qcom: debugcc: Remove the gcc_camss_camnoc clocks fbdev: msm: Avoid runtime sus/res for DP/HDMI uapi: Add UAPI headers for slatecom_interface driver soc: qcom: smsm: Add wakeup capable flags to SMSM IRQ f2fs: don't sleep while grabing nat_tree_lock Ignore -106 error while opening channel byte-cntr: Don't write csr register when byte-cntr is disabled arm64: defconfig: Set qrtr wakeup for lito net: qrtr: Make wakeup timeout configurable mhi: core: Avoid race condition mhi channel prepare and M0 event msm: synx: acquire ref of synx handle in each function msm: ipa3: Fix to handle zero length frag skb packet cnss_utils: Update the copyright years of file to 2017, 2019-2021 FM: mutex changes modified Revert "qseecom: Add shmbrdige to allocate memory" Revert "ANDROID: net: ipv4: sysfs_net_ipv4: Add sysfs-based knobs for controlling TCP window size" Revert "RFC: ANDROID: net: ipv4: sysfs_net_ipv4: Fix TCP window size controlling knobs" ANDROID: xt_qtaguid: fix UAF race coresight: byte-cntr: Add ETR status check in bypass notifier clk: qcom: debugcc: Remove the gcc_camss_camnoc clocks usb: f_fs: Avoid invalid pointer access in ffs_fs_get_tree serial: msm_geni_serial: Enable SW flow on in runtime suspend defconfig: msm: Enable RPM SMD cooling device driver for KHAJE defconfig: Enable CONFIG_ION_SYSTEM_HEAP for bengal f2fs: fix the periodic wakeups of discard thread f2fs: allow to change discard policy based on cached discard cmds coresight: byte-cnter: limit error log output coresight: byte-cnter: Add ETR status check in bypass notifier msm: synx: fix synx_release_core race condition irqchip: mpm: Add mpm mapping for Khaje f2fs: change to use rwsem for cp_mutex cnss2: Assert on FW memory allocation failure msm: kgsl: Keep the context alive until its fences signal soc: qcom: secure_buffer: Fix the parameter passing to dmac_flush_range cnss_utils: Increase unsafe channel max num for 6G clk: qcom: gpucc: Update voltage fmax table for GPU clock for KHAJE msm: ipa3: Enable hardbyte limit for WAN consumer pipe dma-mapping-fast: Fix sg-list length calculation in fast_smmu_unmap_sg() qseecom: Add shmbrdige to allocate memory msm: kgsl: Use worker to put refcount on mem entry usb: phy: qusb: Add wrapper function for phy reset usb: pd: Clear vdm_tx if SVDM message is sent on SOP' drivers: thermal: virtual-sensor: Add new virtual sensor for MSM8917 defconfig: Enable CONFIG_ION_SYSTEM_HEAP for bengal futex: Handle faults correctly for PI futexes f2fs: fix the periodic wakeups of discard thread f2fs: allow to change discard policy based on cached discard cmds futex: Simplify fixup_pi_state_owner() futex: Provide and use pi_state_update_owner() usb: phy: Reset PHY while disabling dpdm regulator futex: Replace pointless printk in fixup_owner() soc: qcom: smem: Update size of legacy partition USB: diag: Add check for ctxt in usb_diag_request_size() driver: Fix compilation error with new sdclang 12 msm: ipa3: Changes to check disconnect in progress while sending data msm: adsprpc: Protect maps using map mutex USB: f_diag: Report Max request size as 16k for ChipIdea defconfig: Enable thermal emergency poweroff delay mmc: sdhci-msm: Switch to required pad voltage for vbias bypass mmc: sdhci-msm: Add vbias bypass specific hw WA flag Revert "mmc: sdhci-msm: Add support to vote for vdd io parent regulator" defconfig: kona: Add CONFIG_AQFWD for RB5 board clk: qcom: gpucc-khaje: Remove NOM_L1 fmax corner mmc: sdhci: Avoid dumping registers when SD card removed FM: Fix for no sound issue in FM Audio usb: gadget: Do not disconnect unregistered dev HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices defconfig: kona: Make configs required to pass CTS tests mandatory UPSTREAM: HID: playstation: Add DualSense player LED support UPSTREAM: HID: playstation: Add microphone mute support for DualSense UPSTREAM: HID: playstation: Add initial DualSense lightbar support UPSTREAM: HID: playstation: Fix unused variable in ps_battery_get_property UPSTREAM: HID: playstation: Fix array size comparison (off-by-one) BACKPORT: HID: playstation: Report DualSense hardware and firmware version UPSTREAM: HID: playstation: Add DualSense accelerometer and gyroscope BACKPORT: HID: playstation: Add DualSense classic rumble support msm: adsprpc: Lock list before removing node msm: pcie: Add ASM2806 PCIe device and vendor id TREAM: HID: playstation: Track devices in list UPSTREAM: HID: playstation: Add DualSense touchpad support UPSTREAM: HID: playstation: Add DualSense battery support UPSTREAM: HID: playstation: Add DualSense Bluetooth support UPSTREAM: HID: playstation: Use DualSense MAC address as unique identifier defconfig: arm64: msm: Enable CTI_SAVE_DISABLE for SDM660 UPSTREAM: HID: playstation: Initial DualSense USB support defconfig: Enable smb1394 driver for khaje coresight-tmc-etr: remove mem_lock when call usb_qdss_close soc: qcom: socinfo: Add support for kona iot soc-id defconfig: sdm660: Add defconfig changes for camera usb: f_qdss: Flush connect_work in qdss close clk: qcom: gpucc: Update the post div ops for GPUCC PLL for KHAJE clk: qcom: clk-alpha-pll: Update implementation for Zonda PLL coresight: tmc: fix spinlock bad magic/usb_qdss_close scsi: ufs-qcom: fix the issue of get wrong ufs clk status from sysfs node futex: Ensure the correct return value from futex_lock_pi() defconfig: arm: msm: Enable debugcc config for SDM439 dt-bindings: Add gpr header required for AR on kona clk: qcom: gpucc: Update the post div ops for GPUCC PLL for KHAJE clk: qcom: clk-alpha-pll: Update implementation for Zonda PLL drivers: thermal: Add support for RPM SMD cooling device diag: Avoid reallocating if buffer supports hdlc max pkt size mhi: core: Fix find_last_bit() usage diag: Update log and event mask code ranges drivers: rpmh: Always bug_on() upon timeout in rpmh_write_batch() clk: qcom: mdss: Fix flicker issue at early boot of kernel drivers: can: mcp25xxfd: Remove return 0 for void function Revert "kbuild: force to build vmlinux if CONFIG_MODVERSION=y" msm: ipa3: Enabling the HOLB on USB consumer pipe for APQ target soc: qcom: dcc: Avoid dcc_sram_writel overflow qxr-stdalonevwr: changes for oracle mic bias soc: qcom: dcc: Avoid huge memory allcation defconfig: msm8937_64: Update the defconfigs soc: qcom: dcc: Use sscanf instead of strlcpy power: qpnp-qg: Fix a DT property name mmc: host: OTA upgrade scenario support for multi fs combination drivers: cpuidle: lpm-levels: Correct missing list initialize serial: msm_geni_serial: Reset UART error code to default during shutdown serial: msm_geni_serial: Add Workqueue to dump the registers cnss2: Add code to do PCIe L2 suspend during shutdown pinctrl: Update reserved gpio list for Khaje config: enable dcc driver soc: qcom: dcc: Add snapshot of qcom-dcc driver serial: msm_geni_serial: Bailout from suspend if RX data is pending diag: Update log and event mask code ranges usb: f_fs: Free descriptors in func_unbind clk: qcom: alpha-pll: Update Alpha PLL width for Zonda PLL usb: gadget: f_rndis: Add 'wceis' flag to indicate 'Wireless' RNDIS clk: qcom: khaje: Update clock changes for GCC/GPUCC/DISPCC clk: qcom: cpu: Add support to L2 PC latency for SDM429/39 clk: qcom: cpu-sdm: Add cpu clock driver for SDM439 dt-bindings: clock: Add support for CPUCC clock ids for SDM439 clk: qcom: Add LPM Latency support for CPU clocks clk: qcom: clk-pll: Add support for SPM event in PLL serial: msm_geni_serial: Reduce wait for transfer delay usb: f_fs: Avoid use-after-free of ffs_data include: uapi: Add support for 128x32 alignment of NV12 defconfig: Enable refgen regulator driver for khaje clk: qcom: rcg2: Force enable the RCG before update for GFX mhi: core: Notify all mhi client's for PCIe link down recovery power: smblite: Fix max_limit_ma for smblite msm: ipa3: Fix to prevent Integer Overflow dcc_v2: Control the cti trigger of each link list individually msm: kgsl: Fix memory leak for anonymous buffers defconfig: Enable remaining defconfigs clk: qcom: debugcc: Add cpucc debugcc support for SDM439 clk: qcom: gcc: Correct the frequencies in freq_tbl for SDM439 clk: qcom: gcc: Add GPLL6 fixed factor support for qm215 cnss2: Add code to notify mhi about link down defconfig: disable per-cgroup pressure tracking defconfig: arm64: msm: Enable MSM_DEBUG_LAR_UNLOCK for msm8937 defconfig: arm: msm: Enable MSM_DEBUG_LAR_UNLOCK for msm8937 soc: mem_dump: Enable MSM_DEBUG_LAR_UNLOCK for MSM8937 defconfig: sdm660: Add missing coresight configs From bbfaa7d36c1eb465f120f2a3dfe25c1fe022195d Mon Sep 17 00:00:00 2001 From: KaiChieh Chuang <kaichieh.chuang@mediatek.com> Date: Thu, 7 Mar 2019 07:51:09 +0800 Subject: [PATCH] ASoC: dpcm: prevent snd_soc_dpcm use after free soc: qcom: Return correct error code when program_key fails fails msm: ADSPRPC: Fix deadlock during SSR soc: qcom: bam_dmux: Skip disconnect call on bootup usb: dwc3: Use pwr_evt_irq to wakeup if dp/dm directly connected to GIC BACKPORT: cgroup: make per-cgroup pressure stall tracking configurable usb: dwc3-msm: Enable pwr_evt_irq for wakeup after LPM is done power: qpnp-qg: Add support to clear soh upon first profile load msm: kgsl: Make sure gpu-speed-bin-vectors has the correct size msm: kgsl: Add multiple fuses based speed bin Change the subprocess argument to fix the build issue include: uapi: Add QBG UAPI headers defconfig: Enable AW2016 LED driver for khaje clk: qcom: gcc: Add halt check for MSS clocks for SDM660 msm: adsprpc: Handle UAF in process shell memory msm: camera: Add gpio based flash driver support leds: aw2016: update breath sysfs node name Use environment variable to find unifdef tool kernel_headers: Explicitly run headers_install under 'sh' dt-bindings: msm: Add bindings for flash type clk: qcom: mmcc: Change halt to halt_voted for SDM660 msm: kgsl: Keep private intact until last refcount is put clk: qcom: khaje: Update freq_tbl and pll configurations defconfig: Enable power delivery on Khaje coresight-tmc-etr: Fix deadlock issue while switching mode defconfig: Enable memory cgroup config leds: add initial driver for AW2016 LED device pinctrl: Update PINCTRL macro definition for Khaje input: touchscreen: nt36xxx: Add Chip id and firmware ANDROID: Incremental fs: Set credentials before reading/writing pinctrl: Add wakeup GPIO register and bit information for khaje defconfig: khaje: Enable khaje pinctrl pinctrl: msm: add range of reserved gpio for Khaje defconfig: disable debug configs ANDROID: Incremental fs: fix up attempt to copy structures with READ/WRITE_ONCE mmc: cqhci: Handle cqhci crypto configurations correctly disp: uapi: drm: Add fsc format modifier Revert "clk: qcom: Add enable_safe_config for gfx3d_clk_src" mhi: core: Prevent doorbell with invalid tre msm: adsprpc: Remove bad ioctl log pinctrl: qcom: Add support for Khaje SoC pin control dt-bindings: msm: Add bindings for flash type msm: ipa: Fix array out of bound and use after NULL check msm: ipa: Fix to check only reset IPA stats can have data as NULL msm: ipa: Fix pointer checked for NULL may be used msm: kgsl: Remove sysfs entries after releasing memory msm: kgsl: Remove debugfs directory inside lock leds: led-class: Retain the latest user brightness request leds: led-class: add support for max_brightness store mmc: core: Add at least 3 mclk cycle delay before next command after ACMD41 FM: Reduce high scan time soc: qcom: Add check to handle out of bound access defconfig: Enable CONFIG_MSM_TZ_LOG for 8937-perf HID: make arrays usage and value to be the same md: dm-default-key: Override dun value for selected bios defconfig: khaje: Add support for clock controllers clk: qcom: debugcc: Add support for Debugcc for KHAJE fbdev: msm: Avoid race condition while iommu mapping from DSI flow md: dm-default-key: Fix IV with set_dun flag defined cnss2: Log SW_CTRL GPIO value if PCIe link training fails diag: Update log and event mask code ranges camera: smmu: fix for incorrect populated sids msm: npu: Use spinlock for ipc write to avoid context switch msm: kgsl: Fix nr_removed calculation while reducing pools Avoid fatal error if ICE registers are not defined rpmsg: qcom_smd: Return error if receive callback is not present clk: qcom: dispcc: Add support for dispcc driver for KHAJE phy-msm-usb: Add mutex for protecting msm_otg_reset wil6210: Drop unicast sub frame if part of a multicast amsdu clk: qcom: gpucc: Add Graphics Clock controller for KHAJE clk: qcom: gcc-khaje: Add GCC support for KHAJE dt-bindings: clock: gcc-khaje: Add support for USB3 MUX and BCR msm: ipa3: Fix to change the tag process timeout value in cleanup usb: dt-bindings: Add USB QMP PHY registers definition for Khaje power: supply: smb1398-charger: disable WIN_OV deglitch for SMB1394 serial: msm_geni_serial: Add ioctl for sending uart error codes to BT host defconfig: Enable SDM429 configs mmc: cmdq_hci: Notify sdhci for enhanced strobe mmc: sdhci-msm: Skip PWRSAVE_DLL setting for sdcc minor verion 0x4D clk: qcom: Add enable_safe_config for gfx3d_clk_src fbdev: msm: Increment commit count during null commit msm: mdss: clear fences in ESD panel dead scenario defconfig: Add HSUSB PHY configurations to Khaje defconfig: Enable SDM429 configs diag: Add debug logs while reading masks into userspace tty: serial: msm: Add suspend resume support defconfig: Enable config CONFIG_UTS_NS for msm8937_32 f_uac2: increase number of requests to 32 for UAC2 defconfig: Enable SDM429 configs USB: dwc3: gadget: Queue data for 16 micro frames ahead in future USB: uvc: Fix video quality issues for streaming video over USB USB: dwc3: gadget: Increase TX fifo size for isochronous endpoint power: smb1398: Add support for SMB1394 clk: qcom: mdss: fix blank / un-blank issue for DSI 12nm pll msm: camera: Add reset logic for snps phy msm: ipa: Fix considering prefetch buf size when mapping usb_bam: Set default BAM type as DWC3 if not specified dt-bindings: clock: Add support for KHAJE clock ids msm: drm: uapi: add rounded corner uapi USB: gadget: f_uvc: Enable required controls for CT and PU vidc_3x: Change to avoid unloading firmware msm: camera: Update SDM439 csiphy driver ipa: Remove overwrite copy Add support for new comanche 1.3 soc ID wil6210: check integrity of received AMSDU packets wil6210: Drop plaintext frames on secure network wil6210: AP should not forward eapol packets netfilter: nf_conntrack_h323: lost .data_len definition for Q.931/ipv6 vidc_3x: Use static table governor for bus voting usb: f_qdss: Avoid wait_for_completion if qdss_disable is called msm: ipa2: free the skb defconfig: Enable ARCH_KHAJE msm: Add initial support for Khaje in Kconfig platform soc: qcom: socinfo: Add soc information for khaje defconfig: Enable config CONFIG_DEBUG_FS for msm8937_64 clk: qcom: clk-alpha-pll: Add support for FSM legacy mode sysfs: ufs-qcom: Add sysfs entries for flashpvl scsi: ufs-qcom: Add one vendor specific sysfs group msm: ipa3: Fix to copy num of rules from user space defconfig: remove CONFIG_SECURITY_PERF_EVENTS_RESTRICT msm: kgsl: Fix snapshot collection for ib1 input: qti-haptics: ensure valid pointer when calling kfree msm: kgsl: Avoid flooding kernel log with invalid ioctl errors rpmsg: qcom_smd: Add check for remote state in send api msm: kgsl: Flush mem workqueue and retry if failed to find SVM region msm: camera: Update csiphy data rate icnss2: Add support for MHI state info soc: qcom: ssr: Enable the irqs before powering up subsystems icnss2: Add new ipc context to log smp2p related logs diag: Update log and msg mask code ranges ARM: defconfig: Enable config for msm8937_32go usb: gadget: f_cdev: Fix use after free of port in f_cdev defconfig: arm64: Enable CONFIG_HID_NINTENDO for QM215 defconfig: arm: Enable CONFIG_HID_NINTENDO for QM215 defconfig: Enable config for msm8937_32 fbdev: msm: Handle rotator init failure correctly tty: Fix ->pgrp locking in tiocspgrp() max31760: add support for additional registers Revert "ANDROID: security,perf: Allow further restriction of perf_event_open" USB: composite: Increase the IN endpoint buffer allocation USB: f_fs: Avoid NULL pointer dereference during epfile_io() USB: gadget: f_fs: Allocate extra buffer for IN endpoint USB: f_serial/f_acm: Increase the IN endpoint buffer allocation USB: f_fs: Increase the IN endpoint buffer allocation leds: qpnp-flash-v2: Add support to control flash ramp time msm: vidc_3x: Correct the arguments type to align with format string msm: vidc_3x: correct the flags set for bus mode defconfig: msm8937_32: Disable BUILD_ARM64_APPENDED_DTB_IMAGE flag defconfig: msm8937_64: Disable BUILD_ARM64_APPENDED_DTB_IMAGE flag soc: qcom: pil: Reuse carveout region for mdt header clk: qcom: gcc: Change rate max values for SDM439 defconfig: msm8937_32go: Disable BUILD_ARM64_APPENDED_DTB_IMAGE flag qseecom: Update correct parameters before sending to smcinvoke msm: ADSPRPC: Add extra checks for Unsigned request msm: camera: QM215 delay during power up sequence config: enable rmnet_data, msm_rmnet_bam driver msm: kgsl: Add A504 GPU support for SDM429 defconfig: Enable MSM8937 and SDM439 config defconfig: Enable SDM439 config defconfig: Enable MSM8937 and SDM439 config defconfig: Enable default-key driver for msm8937_32 defconfig: Enable default-key driver for msm8937_64 defconfig: Add Radio_IRIS related config parameter defconfig: Add Radio_IRIS related config parameter cnss2: Add CNSS_BUS_EVENT to report bus info cnss2: Add update_uevent API to notify CNSS event rpmsg: qcom_smd: Ensure ordering of channel info updates defconfig: Enable WCNSS configs soc: qcom: bam_dmux: Abort open/close cmd during SSR diag: Use valid data_source for a valid token Add support for new HSP version mmc: sdio: Retune sdio after resume diag: Copy length and buffer locally to send to userspace client diag: Update log mask code ranges config: enable new rmnet_data driver regulator: qpnp-lcdb: Add n_voltages property for LCDB regulators spi: spi-geni-qcom: Set IOEB for MHI on SPI RX only case diag: Prevent out of bound write while sending dci pkt to remote drivers: rpmsg: fix to avoid dump stack in rpm-smd driver msm: kgsl: Enable content protection for A505 GPU serial: msm_geni_serial: Bypass Flow control lines from termios defconfig: Enable config for msm8937_64 iommu/arm-smmu: add option to enable halt/resume of SMMU config: enable new rmnet_data driver usb: gadget: Add snapshot of USB RMNET Function driver extcon: Initialize blocking notifier while registering clk: qcom: gcc: Add GCC driver node support for SDM429 icnss: Avoid qmi register/unregister in case of qmi failure icnss2: Avoid qmi register/unregister in case of qmi failure tcp: adjust rto_base in retransmits_timed_out() tcp: retry more conservatively on local congestion tcp: create a helper to model exponential backoff tcp: always set retrans_stamp on recovery tcp: address problems caused by EDT misshaps cnss2: Add sysfs support for configuring qtimer sync interval iommu/arm-smmu: Allocate non-coherent memory for secure pagetables defconfig: msm: Enable dm-snapshot for msm8937_32go defconfig: msm: Enable dm-snapshot for msm8937_32 defconfig: msm: Enable dm-snapshot for msm8937_64 clk: qcom: clk-pll: Round off req_rate in determine rate include: uapi: Add charger specific headers for QM215 clk: qcom: smd-rpm: Add RPM-SMD clock support for SDM429 defconfig: Enable USB BAM and SMD configs mhi: dev: netdev: Set the mac header to 0 for skbs msm: adsprpc: overflow vulnerability by race condition in adsprpc driver defconfig: Enable USB BAM and SMD configs defconfig: Enable default-key driver for msm8937_32go signal: Avoid corrupting si_pid and si_uid in do_notify_parent defconfig: Enable MDSS PLL for msm8937 defconfig: Initial defconfig files for MSM8937_64 ice: add return value for functions where ICE is disabled cnss2: Check for BT Enable GPIO in QCA6390 soc: qcom: Enable MSM_TZ_SMMU msm8937 usb: gadget: Setup DMA ops for OTG's gadget devices fbdev: msm: Enable mdss rotator driver defconfig: Enable MDSS PLL config for msm8937_32 defconfig: Add Radio_IRIS related config parameter cnss2: Use unified API to get RDDM and recovery timeouts cnss2: Add new API to get QMI related timeouts cnss2: Add support to populate device memory information iommu: Update function for ARM_MSM_SECURE io pagetable type Don't use gpio_free() for output gpios clk: qcom: gcc: Add gcc-mdss driver node support for QM215 RPMSG driver changes for FM in msm-4.19 defconfig: Enable USB BAM configs defconfig: Initial defconfig files for MSM8937_32 cnss2: Add CNSS wrapper function for msm_pcie_reg_dump() clk: qcom: gcc: Add GPLL3 derived frequencies for qm215 iio: spmi-vadc: Add option to specify scale-fn-type in devicetree iio: adc: spmi-vadc: Add adc support for SPF targets cfg80211: Adjust 6 GHz frequency to channel conversion iommu: Do not set COHERENT flag for secure pagetable allocation soc: qcom: smp2p: Add proper retrigger detection drivers: soc: qcom: Fix compilation errors clk: qcom: mdss: Update VCO Clk enums for mdss-dsi-28lpm dt-bindings: clock: Add mdss-28nm-pll-clk for legacy targets drivers: soc: qcom: Add bam dmux smem state handling net: ethernet: Add snapshot of RMNET BAM driver scsi: ufs: Fix IOCTL error checking for input buffer clk: qcom: mdss: fix blank / unblank for DSI 28nm pll soc: qcom: Add support for MSM_TZ_SMMU iommu/arm-smmu: Do not write to slave side protected context banks net/sched: fix race between deactivation and dequeue for NOLOCK qdisc uio: msm_sharedmem: By pass failure for hyp_assign_phys defconfig: enable PSI config for MSM8937_32go spmi: spmi-pmic-arb-debug: replace ioremap_resource with ioremap qcom-geni-se: Avoid dumping of GENI registers in console dm verity: skip verity work on I/O errors when system is shutting down Return Immediately if failed to set to reset gpio state msm: adsprpc: Clean DMA handles maps in case of error diag: Prevent possible out of bound copy to userspace ARM: decompressor: avoid speculative prefetch from protected regions power: smb5-lib: Fix race conditions for typec power role msm: mdss: update the DSI 12nm PHY programming sequence msm: mdss: update the power down sequence for DSI 12nm PHY msm: ice: Fix stack-out-of-bound erros on kasan builds clk: qcom: debugcc: Add cpucc debugcc support for QM215 msm: ipa: Fix use-after-free in ipa3_alloc_counter_id msm: ipa: correct the pointer in idr for FnR stats counter fbdev: msm: update event callback function to perform ESD check ANDROID: xt_qtaguid: Remove tag_entry from process list on untag clk: qcom: mdss: update dsi 12nm clock driver msm: ipa: fix race condition on PM vote on sys pipes msm: ipa3: Fix to null pointer access radio: iris: Add snapshot of iris FM radio support defconfig: Add WCNSS related config parameter wcnss: Update pm wake api's for 4.19 kernel qtee_shmbridge: update copyright diag: Update event and log mask code ranges arm-smmu: add bitmap for secure context banks iommu/arm-smmu: override writel_relaxed in smmu global address space qseecom: Add flush_work based on flag icnss2: Add handler for SMMU faults wcnss: Add wcnss snapshot to msm-4.19 mm: cma: Print correct request pages defconfig: Add clock controller support for QM215 clk: qcom: cpu-sdm: Add cpu clock driver for SDM dt-bindings: iio: Add scale function for QM215 batt therm platform: msm: Add USB BAM support to ChipIdea/RMNET leds: vibrator: Add snapshot of vibrator driver tty: serial: msm_geni_serial: Resolve race btw stop rx and cancel rx msm: kgsl: Access map_count only if entry is successfully allocated tty: serial: msm_geni_serial: Fix timeout for Rx abort defconfig: Enable chipidea USB controller configs msm: sde: Update rotator OT settings for sdm660 msm: mdss: dsi: set backlight handle to NULL in error case clk: qcom: mdss: Add check to read the gdsc status msm: npu: Don't send interrupt if command has been consumed msm: ipa: Send actual DL flt rule length to Q6 sde: rotator: use shared lock while accessing vbif clk: qcom: clk-pll: Add support for HF PLL Ops clk: qcom: Add enable/disable to clk_regmap_mux_div_ops clk: qcom: Update parent map to use parent_map struct qseecom: Update the error val check ARM: qcom: add board config support for sdm439 and sdm429 ARM: qcom: Add board config support for msm8937 Set the default slot for Full Disk Encryption key to 31 msm: ipa: Enable wdi3 API in ipa3 config iio: ch101: Return -ENODEV when get expander GPIO failed USB: EHCI: Add MSM Host Controller driver usb: gadget: Add snapshot of ChipIdea driver usb: phy: Add snapshot of PHY msm usb driver qdss_bridge: fix kfree issue rpmsg: glink: do not break from interrupt handler msm: kgsl: Set correct values for SMMU protect register for A3xx clk: qcom: clk-debug: Add support to dump GDSC registers usb: dwc3: gadget: Prevent double free scenario for cancelled_list diag: Enable graceful transfer of transport diag: Enable diag over rpmsg communication for adsp drivers: char: Fix compilation error for smd pkt driver defconfig: msm: Enable smd pkt driver for QM215/SDM429/439 clk: qcom: mdss: update mdss-dsi-28lpm clk names rtc: rtc-pm8xxx: add support for PM8916 RTC msm: mdss: Fix race condition while iommu mapping from DSI flow defconfig: enable MDSS PLL config for MSM8937_32go msm: ipa: fix potential race condition ioctls dt-bindings: clock: Add support for CPUCC clock ids for QM215 Add support for new versions for BT chip smcinvoke: Update the correct parameters and result from qseecom misc: add qrc ioctl functions misc: add qrc_core and qrc_uart diag: Sanitize the mempools with pool data size check socinfo: Add socinfo support for sdm450 socinfo: Add socinfo support for msm8953 ARM: qcom: Add board config support for sdm450 ARM: qcom: Add board config support for msm8953 usb: dwc3: Enable parkmode for Gen1 controllers msm: camera: Fix for HFR120 crash while msm: gsi: Using kzalloc instead of devm_kzalloc clk: qcom: debugcc: Add debugcc support for QM215 clk: qcom: gcc: Add support for GCC clock driver usb: f_diag: Replace ERROR with pr_err clk: qcom: mdss: add dsi phy 12nm clock dt-bindings: clock: Add 12nm clock device tree bindings rpmsg: qcom_smd: Add NO_SUSPEND flag for smd edge irq rpmsg: qcom_smd: Read data of size equal to fifo size rpmsg: qcom_smd: Read data of size greater than fifo size rpmsg: qcom_smd: Add ipc logging for smd driver msm: kgsl: Change start variable type to int in kgsl_iommu_add_global rpmsg: smd: Signal the TX channel that smd driver read data rpmsg: qcom_smd: Add GET/SET signal support rpmsg: qcom_smd: increase bounce buffer size drivers: rpmsg: Add smd driver module at post core init kona_defconfig: Enable hidraw config usb: misc: nb7vpq904m: update suspend and resume function msm: kgsl: Use pid struct to find the process to reclaim mm: process_reclaim: pass pid struct instead of tgid msm: kgsl: Change vma->vm_file to shmem file mm: process_reclaim: skip target_vma iio: qcom-rradc: Update logic to monitor health of RRADC peripheral cfg80211: export regulatory_hint_user() API msm: mdss: update MDSS DSI ULPS configuration fbdev: msm: call pxl clk unprepare during suspend msm: mdss: add support to handle LP_RX_TO/BTA_TO errors for DSI 12nm PHY msm: mdss: perform DSI PHY s/w reset for 12nm PHY during unblank msm: mdss: update the MDSS DSI ULPS exit sequence msm: mdss: add support to program of HSTX drivers for DSI 12nm PHY msm: mdss: update DSI ULPS entry/exit sequence msm: mdss: add support for DSI 12nm PHY in DSI driver net: qrtr: Excessive logging casuing boot failure defconfig: msm: enable thermal efuse driver for kona iot drivers: thermal: qcom: Add driver to modify thermal zone based on efuse mmc: core: Set cqe_enabled flag correctly serial: msm_geni_serial: Fix false warning for reset failure Kconfig: enable default config of cpu freq qcom for msm8953 msm: Add initial support for sdm450 Kconfig platform msm: Add initial support for msm8953 Kconfig platform Revert "cnss2: Dump mhi debug regs on receiving mhi WAKE event cb" msm: pcie: Restore BME for RC after link_down recovery on SBR msm: ADSPRPC: Substitute vfs check with flags icnss: Allow register/unregister driver execution in serial manner drivers: char: reset signal support for smd channels drivers: char: add stream like read support crypto: Fix possible stack out-of-bound error drivers: irqchip: qcom: Add MSM8953 pin data for MPM defconfig: Enable EXT4 configs drivers: iio: enable compile for TDK sensor power: smb2: Enable read/writing of Type-C Rp value usb: gadget: f_mass_storage: Remove runtime async resume drivers: iio: add Makefile and Kconfig for TDK chirp sensor backlight: qcom-wled: Add "qcom,sync-dly" device tree property usb: dwc3: Issue ENDTRANSFER cmd on ep0 unconditionally coresight: disable the path when enable source link fail qcom: fg-memif: correct timeout condition for memory grant power: qpnp-fg-gen3: Add a property to reset FG BCL device power_supply: Add FG_RESET_CLOCK property qseecom: Check error when allocating coherent buffer defconfig: Enable CPR Regulator for msm8937go diag: Acquire spinlock for list delete operation rpm-smd: Remove redundant spinlocks which are not required regulator: qpnp-lcdb: Disable step voltage ramp for PM8150L V3 power: smb5-lib: Query POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN defconfig: Enable Incremental FS support for msm8937_32go media/dvb: Deregister dma buffers fom shmbridge msm: kgsl: Show max gpu temperature USB: pd: Add support for enabling PD2.0 only as source usb: gadget: Clear transfer started flag if endxfer cmd times out backlight: qcom-spmi-wled: Change the SYNC toggle sequence USB: pd: Restart host mode in high speed if no usb3 & dp concurrency defconfig: Initial defconfig files for MSM8937_32go TDK-Robotics-RB5 drivers source code files diag: Update event and log mask code latest range clk: qcom: smd-rpm: Add RPM-SMD clock support for QM215 fs: crypto: Add support for legacy pfk based FBE fastrpc : fastrpc porting for kernel 4.19 SPF targets qdss_bridge: fix memory leak issue bindings: clock: qcom: Add support for clock IDs for QM215 drivers: char: msm_smd_pkt: Return error in case driver is not ready kernel: driver: Added support msm_smd_pkt driver dt-bindings: clock: Add support for GCC clock ids for SDM429 wigig_sensing: treat data ready as deep sleep exit when needed usb: dwc3: gadget: Replace dev with its parent sysdev in ep_disable usb: dwc3: gadget: Check controller status with endpoint enable/disable coresight: Make coresight functions as inline cnss2: WAR to trigger self-recovery for link recover callback net: qrtr: Excessive logging casuing boot failure pinctrl: Add support for msm8917 pinctrl pinctrl: Add support for msm8937 pinctrl msm: pcie : Extend link recovery for config space access failure cnss_prealloc: Add a 128kB to prealloc pool rpmsg: qcom_smd: allow smd create device if remote state is closing usb: pd: Add support to disable pps capability nl80211: add error messages to nl80211_parse_chandef() cnss2: Increase prealloc table to satisfy latest driver requirement power: smb5-lib: Add additional check to exit charge-termination WA cnss2: Dump mhi debug registers on receiving mhi WAKE event cb msm:ADSPRPC :Fix to avoid Use after free in fastrpc_internal_munmap qseecom: Add boundary checks between two subsequent fields diag: Read from USB without holding spinlock serial:msm_geni_serial: Handling the cts counter in uart driver arm64: fix bootloader_memory_limit usb: phy: qusb2: Update tune value for host mode coresight: cti: Solve boot up issue cnss2: retry mhi suspend in case packets are pending in MHI layer clk: qcom: mdss: Enable mdss 28lpm pll driver msm: pcie : Notify client driver on reading FF's msm: kgsl: Use pid struct to find the process to reclaim mm: process_reclaim: pass pid struct instead of tgid msm: kgsl: Change vma->vm_file to shmem file qcom: step-chg-jeita: Add support for jeita fcc scaling mm: process_reclaim: skip target_vma mhi: core: Check PCIe link status before accessing MHI registers power: qpnp-smb5: Add DT option to enable JEITA-ARB handling power: smb5-lib: Improve the charge-termination WA handling msm: pci: print PCIE LTSSM state at DRV suspend and resume msm: kgsl: Deregister gpu address on memdesc_sg_virt failure diag: Handle drops for diag over rpmsg diag: Enable diag over rpmsg communication for modem diag: Enable diag over rpmsg communication for wcnss usb: gadget: gsi: Ensure the doorbell is blocked before suspend drivers: irqchip: qcom: Add MSM8937 pin data for MPM ARM: qcom: Add board config support for qm215 soc: qcom: socinfo: Add supprot for QM215 QRD soc-id soc: qcom: socinfo: Add support for msm8917 soc-id soc: qcom: socinfo: add support for sdm429 and sdm439 soc: qcom: socinfo: Add support for msm8937 soc-id arm/arm64: Kconfig: Add support for qm215 ARM: qcom: Add board config support for msm8917 arm64: Kconfig: Add ARCH_SDM439 and ARCH_SDM429 support arm64: Kconfig: Add support for msm8937 on msm-4.9 msm: adsprpc: null pointer check for sctx regulator: qpnp-lcdb: fix race between SC interrupt and lcdb enable msm: kgsl: Protect the memdesc->gpuaddr in SVM use cases msm: kgsl: Stop using memdesc->usermem net: sch_generic: fix the missing new qdisc assignment usb: gadget: composite: Add spinlock protection for usb string descriptor msm: kgsl: add condition to check gpuhtw_llc support icnss: Add code to send qdss mode and sysfs interface for qdss icnss: Add code to downdload qdss trace config leds: qpnp-flash-v2: Fix out-of-bound array access mm: skip speculative path for non-anonymous COW faults ARM: msm: Add board config support for 32 bit bengal apq iot cnss2: Add code to fix a print error in update timestamp api icnss2: change to avoid device crash if RF card is not present mmc: sdhci-msm: read this reg IPCAT_MINOR_MASK to sdhc host pci: msm: Add support for linkdown recovery on hot reset net: qrtr: print error case for qrtr receive spi: spi-geni-qcom: Calculate transfer timeout dynamically spi: spi-geni-qcom: Configure DFS index and clk before doing set rate cnss2: Add delay for pci link training retries Revert "msm: kgsl: Add GPUCC register dumps to A6xx GPU snapshot" cnss2: Add code to handle idle-restart failure gracefully icnss2: Clear SMP2P data during SSR Revert "msm: kgsl: Add GPUCC register dumps to A6xx GPU snapshot" net: qualcomm: rmnet: memset before sending genl response diag: Add support for querying diagid for wpss subsystem wil6210: add ability to help debug tx latency regulator: cpr: add snapshot of cpr-regulator driver scsi: ufshcd: Fix double release of hba walt: Add window rollover trace event msm: kgsl: Correct the refcount on current process PID USB: gadget: Add support for superspeed plus for UAC2 & UVC serial: msm_geni_serial: Perform Abort sequence for cancel failure serial: msm_geni_serial: Correct start rx sequence serial: msm_geni_serial: Pull RFR before stop_rx for uart Revert "nl80211: fix non-split wiphy information" qseecom: use legacy command for slateapp USB: f_uac2: Update terminal types as mic and speaker defconfig: kona: Enable USB UVC drivers usb: gadget: f_uvc: Fix video streaming quality issues usb: gadget: f_uvc: Fix crash on disconnect/connect during streaming msm: npu: Prevent unpaired power vote/unvote via sysfs node qdss_bridge: fix use-after-free is on cdev_put defconfig: set CONFIG_HZ = 250 for Bengal USB: uvc_video: Check for return value before halt bulk endpoint USB: configfs: Clear deactivation flag in configfs_composite_unbind() msm: ADSPRPC: Add check to avoid out of bound scenario uapi: ipa: Support uc header proc ctx for DSCP insertion usb: dwc3: core: Destroy ipc log context on remove msm: ipa: add check to see if pm client is not NULL cnss2: Fix KW issues for pointer check and variable init ANDROID: vfs: d_canonical_path for stacked FS msm: ipa3: Add change to increase timeout value defconfig: arm64: msm: enable CONFIG_RB5_GPIOS_ENABLE msm: driver: Add driver to enable RB5 GPIOs msm: ADSPRPC: Reset debug buffer allocation check flag power: smb1355: Extend minoff-time and dead-time for SMB1355 defconfig: arm64: msm: enable CONFIG_RB5_FAN_CONTROLLER msm: fan: Add driver to control fan on RB5 HID: qvr: Remove device pointer on disconnect usb: gadget: uvc: Update frame size as per frame type usb: gadget: f_uvc: Fix incorrect frame indexing usb: gadget: uvc: Add support for UVC 1.5 usb: gadget: Add support for UVC function f2fs: prepare a waiter before entering io_schedule f2fs: fix deadlock between quota writes and checkpoint cnss2: Add api to get pci reg dump for hang data power: smb1398-charger: Toggle UVLO-config on USB removal and shutdown msm: ipa3: Add support PM api in ipav3 fs: crypto: support IV_INO_LBLK_32 for legacy (V1) format msm: ipa3: Fix to unmap LOW LAT consumer pipe buffers msm: pcie: Dump PCIe registers for hang event trace: Fix race in trace_open and buffer resize call msm: ipa4: Add change to stop netdev msm: fbdev: dp: send video notiification after audio teardown msm: kgsl: Poll a6x crashdumper register memory for status usb: dwc3-msm: Rectify 64 bit dma address programming for GSI msm: ADSPRPC: Enable ram dumps collection f2fs: should avoid inode eviction in synchronous path i3c: i3c-master-qcom-geni: Add HW and FW version read support msm: ipa3: Add check to validate rule_cnt i3c: i3c-master-qcom-geni: Manage driver suspend in late PM stage net: qrtr: Use cyclic idr allocator for port assignment mmc: core: change judgement for card busy detection msm: ADSPRPC: Handle third party applications msm:ipa4: Fix race condition msm: kgsl: Check for gmu prealloc failure only in case of prealloc request msm: ipa: Use kvfree instead of kfree scsi : ufs-qcom: Add provision to set qcom specific supplies in LPM fbdev: msm: update fb_release sequence mhi: core: Increase RSC credit to 10 HID: qvr: wake up after acknowledgment from viewer icnss: Update FW_INIT_DONE QMI indication with hang event params wil6210: add max_mcs attribute cnss2: Check link status before setting wlaon_pwr_ctrl registers defconfig: arm64: msm: Enable USB RMNET & RNDIS using IPA over BAM2BAM msm: kgsl: Add apb_pclk to the clock list and increase max clock count usb: gadget: Add snapshot of USB RMNET Function driver drivers: soc: qcom: Add usb bam changes usb: gadget: f_qc_rndis: Add RNDIS support using IPA over BAM2BAM serial: msm_geni_serial: Add enable/disable of dma irq bits serial: msm_geni_serial: Don't queue the rx dma buffer in stop rx msm: kgsl: Allow I/O coherency on imported buffers if we can drivers: phy: ufs: Remove the condition check to calibrate UFS Phy Reverting usb changes defconfig: Sync with Android-4.19 configs clk: qcom: gcc: Update the halt flags for clocks on SDM660 power: qpnp-qg: Expose CHARGE_COUNTER_SHADOW power supply property cnss2: Check for BT Enable GPIO in QCA6490 & QCA6390 icnss2: Avoid race between soc wake release threads icnss2: Add code for SSR dump collection feature for moselle nl80211: fix NL80211_ATTR_HE_6GHZ_CAPABILITY usage cfg80211: Indicate support 6GHz band in kernel cfg80211: treat 6 GHz channels as valid regardless of capability cfg80211: require HE capabilities for 6 GHz band cfg80211: reject HT/VHT capabilities on 6 GHz band cfg80211: add and expose HE 6 GHz band capabilities cfg80211: handle 6 GHz capability of new station ieee80211: add HE ext EIDs and 6 GHz capability defines ieee80211: add code to obtain and parse 6 GHz operation field cfg80211: add a helper to identify 6 GHz PSCs cfg80211: adapt to new channelization of the 6GHz band cfg80211: fix 6 GHz frequencies to kHz ieee80211: update HE IEs to D4.0 spec mac80211: update HE IEs to D3.3 mac80211: update HE operation fields to D3.0 ieee80211: remove redundant leading zeroes iwlwifi: split HE capabilities between AP and STA netlink: add ethernet address policy types netlink: add NLA_REJECT policy type wireless: align to draft 11ax D3.0 mac80211: Add he_capa debugfs entry cfg80211: express channels with a KHz component cfg80211: Add support for 60GHz band channels 5 and 6 cfg80211: apply same mandatory rate flags for 5GHz and 6GHz cfg80211: ibss: use 11a mandatory rates for 6GHz band operation clk: qcom: gpucc: Add support for new clock frequency for Lagoon soc: qcom: minidump: Change the way to locate log_buf qcom-cpufreq: Removing lmh-dcvs parsing in ready callback usb: dwc3: msm: allow suspend in host mode icnss2: Add support for host triggered recovery Bluetooth: Implement a minimum off-time for AON discharge issue defconfig: sdm660: Enable CONFIG_HID_NINTENDO for sdm660 defconfig: For support api_30 kernel changes defconfig: Sync with Android-4.19 configs defconfig: Disable CRYPTO_MD4 config defconfig: Enable VETH config msm:adsprpc: Prevent use after free in fastrpc_set_process_info Revert "ANDROID: Kbuild, LLVMLinux: allow overriding clang target triple" Correct the FM port numbers for Chk 3.x net/ipv4: always honour route mtu during forwarding usb: dwc3: Ensure blocking_sync waits until host mode starts or stops usb: dwc3: gadget: Fix double add due to cleanup_cancelled_request ANDROID: fuse: Add support for d_canonical_path ANDROID: vfs: add d_canonical_path for stacked filesystem support clk: qcom: clk-debug: Add support for debug clock API's cfg80211: use same IR permissive rules for 6GHz band cfg80211: add 6GHz in code handling array with NUM_NL80211_BANDS entries cfg80211: extend ieee80211_operating_class_to_band() for 6GHz cfg80211: util: add 6GHz channel to freq conversion and vice versa cfg80211: add 6GHz UNII band definitions nl80211: add 6GHz band definition to enum nl80211_band ANDROID: Temporarily disable XFRM_USER_COMPAT filtering msm: ipa3: Add debug logs to check unregister netdev completion time Revert "clk: Evict unregistered clks from parent caches" ANDROID: GKI: Enable DEBUG_INFO_DWARF4 timekeeping/vsyscall: Prevent math overflow in BOOTTIME update UPSTREAM: mm/sl[uo]b: export __kmalloc_track(_node)_caller BACKPORT: xfrm/compat: Translate 32-bit user_policy from sockptr BACKPORT: xfrm/compat: Add 32=>64-bit messages translator UPSTREAM: xfrm/compat: Attach xfrm dumps to 64=>32 bit translator UPSTREAM: xfrm/compat: Add 64=>32-bit messages translator BACKPORT: xfrm: Provide API to register translator module ANDROID: Publish uncompressed Image on aarch64 FROMLIST: crypto: arm64/poly1305-neon - reorder PAC authentication with SP update UPSTREAM: crypto: arm64/chacha - fix chacha_4block_xor_neon() for big endian UPSTREAM: crypto: arm64/chacha - fix hchacha_block_neon() for big endian msm: ipa: fix the use-after-free on qmi framework in ssr scenario fscrypt: Handle support for v1 encryption policy ANDROID: GKI: update the ABI xml spi: spi_qsd: Add ipc logging for spi driver qbt_handler: Memset userspace struct to zero drivers: soc: qcom: Port bam dmux driver drivers: soc: qcom: Add bam dmux driver support msm: kgsl: Compare pid pointer instead of TGID for a new process power: qpnp-smb5: Update legacy cable detection logic in bootup spi: spi_qsd: Add Shared EE property check for spi soc: qcom: Correct the module description for llcc-orchid usb: dwc3: core: Add ipc logs when sg lists are used icnss2: Send power save enter/exit via SMP2P ANDROID: clang: update to 11.0.5 FROMLIST: arm64: link with -z norelro regardless of CONFIG_RELOCATABLE defconfig: Enable CONFIG_LEGACY_ENERGY_MODEL_DT for sdm660 scsi: ufs: Increase fDeviceInit flag poll time to 5sec msm: pcie: update with link power on check for user PCIe resume scsi: ufs: Fix ufshcd_hold dead loop issue if error recovery is handing defconfig: arm64: msm: enable CONFIG_FORCE_ALLOC_FROM_DMA_ZONE ANDROID: GKI: enable CONFIG_WIREGUARD UPSTREAM: wireguard: peerlookup: take lock before checking hash in replace operation UPSTREAM: wireguard: noise: take lock when removing handshake entry from table UPSTREAM: wireguard: queueing: make use of ip_tunnel_parse_protocol UPSTREAM: net: ip_tunnel: add header_ops for layer 3 devices UPSTREAM: wireguard: receive: account for napi_gro_receive never returning GRO_DROP UPSTREAM: wireguard: device: avoid circular netns references UPSTREAM: wireguard: noise: do not assign initiation time in if condition UPSTREAM: wireguard: noise: separate receive counter from send counter UPSTREAM: wireguard: queueing: preserve flow hash across packet scrubbing UPSTREAM: wireguard: noise: read preshared key while taking lock UPSTREAM: wireguard: selftests: use newer iproute2 for gcc-10 UPSTREAM: wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing UPSTREAM: wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning UPSTREAM: wireguard: send/receive: cond_resched() when processing worker ringbuffers UPSTREAM: wireguard: socket: remove errant restriction on looping to self UPSTREAM: wireguard: selftests: use normal kernel stack size on ppc64 UPSTREAM: wireguard: receive: use tunnel helpers for decapsulating ECN markings UPSTREAM: wireguard: queueing: cleanup ptr_ring in error path of packet_queue_init UPSTREAM: wireguard: send: remove errant newline from packet_encrypt_worker UPSTREAM: wireguard: noise: error out precomputed DH during handshake rather than config UPSTREAM: wireguard: receive: remove dead code from default packet type case UPSTREAM: wireguard: queueing: account for skb->protocol==0 UPSTREAM: wireguard: selftests: remove duplicated include <sys/types.h> UPSTREAM: wireguard: socket: remove extra call to synchronize_net UPSTREAM: wireguard: send: account for mtu=0 devices UPSTREAM: wireguard: receive: reset last_under_load to zero UPSTREAM: wireguard: selftests: reduce complexity and fix make races UPSTREAM: wireguard: device: use icmp_ndo_send helper UPSTREAM: wireguard: selftests: tie socket waiting to target pid UPSTREAM: wireguard: selftests: ensure non-addition of peers with failed precomputation UPSTREAM: wireguard: noise: reject peers with low order public keys UPSTREAM: wireguard: allowedips: fix use-after-free in root_remove_peer_lists UPSTREAM: net: skbuff: disambiguate argument and member for skb_list_walk_safe helper UPSTREAM: net: introduce skb_list_walk_safe for skb segment walking UPSTREAM: wireguard: socket: mark skbs as not on list when receiving via gro UPSTREAM: wireguard: queueing: do not account for pfmemalloc when clearing skb header UPSTREAM: wireguard: selftests: remove ancient kernel compatibility code UPSTREAM: wireguard: allowedips: use kfree_rcu() instead of call_rcu() UPSTREAM: wireguard: main: remove unused include <linux/version.h> UPSTREAM: wireguard: global: fix spelling mistakes in comments UPSTREAM: wireguard: Kconfig: select parent dependency for crypto UPSTREAM: wireguard: selftests: import harness makefile for test suite UPSTREAM: net: WireGuard secure network tunnel UPSTREAM: timekeeping: Boot should be boottime for coarse ns accessor UPSTREAM: timekeeping: Add missing _ns functions for coarse accessors UPSTREAM: icmp: introduce helper for nat'd source address in network device context UPSTREAM: crypto: poly1305-x86_64 - Use XORL r32,32 UPSTREAM: crypto: curve25519-x86_64 - Use XORL r32,32 UPSTREAM: crypto: arm/poly1305 - Add prototype for poly1305_blocks_neon UPSTREAM: crypto: arm/curve25519 - include <linux/scatterlist.h> UPSTREAM: crypto: x86/curve25519 - Remove unused carry variables UPSTREAM: crypto: x86/chacha-sse3 - use unaligned loads for state array UPSTREAM: crypto: lib/chacha20poly1305 - Add missing function declaration UPSTREAM: crypto: arch/lib - limit simd usage to 4k chunks UPSTREAM: crypto: arm[64]/poly1305 - add artifact to .gitignore files UPSTREAM: crypto: x86/curve25519 - leave r12 as spare register UPSTREAM: crypto: x86/curve25519 - replace with formally verified implementation UPSTREAM: crypto: arm64/chacha - correctly walk through blocks UPSTREAM: crypto: x86/curve25519 - support assemblers with no adx support UPSTREAM: crypto: chacha20poly1305 - prevent integer overflow on large input UPSTREAM: crypto: Kconfig - allow tests to be disabled when manager is disabled UPSTREAM: crypto: arm/chacha - fix build failured when kernel mode NEON is disabled UPSTREAM: crypto: x86/poly1305 - emit does base conversion itself UPSTREAM: crypto: chacha20poly1305 - add back missing test vectors and test chunking UPSTREAM: crypto: x86/poly1305 - fix .gitignore typo UPSTREAM: crypto: curve25519 - Fix selftest build error UPSTREAM: crypto: {arm,arm64,mips}/poly1305 - remove redundant non-reduction from emit UPSTREAM: crypto: x86/poly1305 - wire up faster implementations for kernel UPSTREAM: crypto: x86/poly1305 - import unmodified cryptogams implementation UPSTREAM: crypto: poly1305 - add new 32 and 64-bit generic versions UPSTREAM: crypto: lib/curve25519 - re-add selftests UPSTREAM: crypto: arm/curve25519 - add arch-specific key generation function UPSTREAM: crypto: chacha - fix warning message in header file UPSTREAM: crypto: arch - conditionalize crypto api in arch glue for lib code UPSTREAM: crypto: lib/chacha20poly1305 - use chacha20_crypt() UPSTREAM: crypto: x86/chacha - only unregister algorithms if registered UPSTREAM: crypto: chacha_generic - remove unnecessary setkey() functions UPSTREAM: crypto: lib/chacha20poly1305 - reimplement crypt_from_sg() routine UPSTREAM: crypto: chacha20poly1305 - import construction and selftest from Zinc UPSTREAM: crypto: arm/curve25519 - wire up NEON implementation UPSTREAM: crypto: arm/curve25519 - import Bernstein and Schwabe's Curve25519 ARM implementation UPSTREAM: crypto: curve25519 - x86_64 library and KPP implementations UPSTREAM: crypto: lib/curve25519 - work around Clang stack spilling issue UPSTREAM: crypto: curve25519 - implement generic KPP driver UPSTREAM: crypto: curve25519 - add kpp selftest UPSTREAM: crypto: curve25519 - generic C library implementations UPSTREAM: crypto: blake2s - x86_64 SIMD implementation UPSTREAM: crypto: blake2s - implement generic shash driver UPSTREAM: crypto: testmgr - add test cases for Blake2s UPSTREAM: crypto: blake2s - generic C library implementation and selftest UPSTREAM: crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation UPSTREAM: crypto: arm/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation i3c: i3c-master-qcom-geni: Handle timeout for DMA FSM reset UPSTREAM: crypto: arm64/poly1305 - incorporate OpenSSL/CRYPTOGAMS NEON implementation i3c: i3c-master-qcom-geni: Save master device info to debug list UPSTREAM: crypto: x86/poly1305 - expose existing driver as poly1305 library UPSTREAM: crypto: x86/poly1305 - depend on generic library not generic shash UPSTREAM: crypto: poly1305 - expose init/update/final library interface UPSTREAM: crypto: x86/poly1305 - unify Poly1305 state struct with generic code UPSTREAM: crypto: poly1305 - move core routines into a separate library UPSTREAM: crypto: chacha - unexport chacha_generic routines UPSTREAM: crypto: mips/chacha - wire up accelerated 32r2 code from Zinc UPSTREAM: crypto: mips/chacha - import 32r2 ChaCha code from Zinc UPSTREAM: crypto: arm/chacha - expose ARM ChaCha routine as library function UPSTREAM: crypto: arm/chacha - remove dependency on generic ChaCha driver UPSTREAM: crypto: arm/chacha - import Eric Biggers's scalar accelerated ChaCha code UPSTREAM: crypto: arm64/chacha - expose arm64 ChaCha routine as library function UPSTREAM: crypto: arm64/chacha - depend on generic chacha library instead of crypto driver UPSTREAM: crypto: arm64/chacha - use combined SIMD/ALU routine for more speed UPSTREAM: crypto: arm64/chacha - optimize for arbitrary length inputs UPSTREAM: crypto: x86/chacha - expose SIMD ChaCha routine as library function UPSTREAM: crypto: x86/chacha - depend on generic chacha library instead of crypto driver UPSTREAM: crypto: chacha - move existing library code into lib/crypto UPSTREAM: crypto: lib - tidy up lib/crypto Kconfig and Makefile UPSTREAM: crypto: chacha - constify ctx and iv arguments UPSTREAM: crypto: x86/poly1305 - Clear key material from stack in SSE2 variant i3c: i3c-master-qcom-geni: Log error if DMA mode fails defcong: sdm660 : Adding support to IPA driver msm: ipa: Add ipa rm support for ipa_v2 UPSTREAM: crypto: xchacha20 - fix comments for test vectors UPSTREAM: crypto: xchacha - add test vector from XChaCha20 draft RFC UPSTREAM: crypto: arm64/chacha - add XChaCha12 support UPSTREAM: crypto: arm64/chacha20 - refactor to allow varying number of rounds UPSTREAM: crypto: arm64/chacha20 - add XChaCha20 support UPSTREAM: crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() UPSTREAM: crypto: x86/chacha - yield the FPU occasionally UPSTREAM: crypto: x86/chacha - add XChaCha12 support UPSTREAM: crypto: x86/chacha20 - refactor to allow varying number of rounds UPSTREAM: crypto: x86/chacha20 - add XChaCha20 support UPSTREAM: crypto: x86/chacha20 - Add a 4-block AVX-512VL variant UPSTREAM: crypto: x86/chacha20 - Add a 2-block AVX-512VL variant UPSTREAM: crypto: x86/chacha20 - Add a 8-block AVX-512VL variant UPSTREAM: crypto: x86/chacha20 - Add a 4-block AVX2 variant UPSTREAM: crypto: x86/chacha20 - Add a 2-block AVX2 variant UPSTREAM: crypto: x86/chacha20 - Use larger block functions more aggressively UPSTREAM: crypto: x86/chacha20 - Support partial lengths in 8-block AVX2 variant UPSTREAM: crypto: x86/chacha20 - Support partial lengths in 4-block SSSE3 variant UPSTREAM: crypto: x86/chacha20 - Support partial lengths in 1-block SSSE3 variant msm: ipa3: Add low-level IPA client support net: support __alloc_skb to always use GFP_DMA msm: ipa2: Add changes compatible to kernel-4.19 msm: ipa2: Add change to fix ipa padding msm: ipa: Add Kconfig changes of IPA2 driver msm: ipa2: Add changes compatible to kernel-4.14 i3c: i3c-master-qcom-geni: Fix DMA and FIFO mode timeout scenario ANDROID: GKI: Enable CONFIG_USB_ANNOUNCE_NEW_DEVICES msm: ipa: Add support of IPA2 driver scsi: ufs: reomove Rst_N pulling up action in ufshcd_resume() serial: msm_geni_serial: Add new UART IPC log file in DMA mode serial: msm_geni_serial: Add delay for rx invalid transfer msm_geni_serial: Add ioctl for adding new IPC log in uart msm: kgsl: Don't allow re-importing memory owned by KGSL serial: msm_geni_serial: memset RX buffer to Zero icnss2: Avoid race between SOC WAKE REQ/RESP ANDROID: GKI: Enable CONFIG_X86_X2APIC i3c: i3c-master-qcom-geni: Manage probe time resources fbdev: msm: disable cpu sync during dma_buf_map_attachment scsi: ufs: Add back a missing sanity check to ufshcd_read_desc_param() icnss: check SKIP_QMI test bit for exported qmi messages ANDROID: move builds to use gas prebuilts i3c: i3c-master-qcom-geni: Force the xfer mode as DMA mode msm: ipa3: Fix to use proper clock timer i3c: i3c-master-qcom-geni: Fix IBI and Hot join related issues msm: ipa3: Add change to not reset HOLB timer UPSTREAM: binder: fix UAF when releasing todo list cnss2: Add support for PCIE gen switch FROMLIST: arm64: vdso32: Allow ld.lld to properly link the VDSO mmc: core: Fix clk scaling when card max freq below 50MHz msm: ipa3: Send enable force clear only for producer pipe sched/tune: Fix improper accounting of tasks usb: dwc3: Stop active transfer on control endpoints Add support for block disk encryption mmc: host: Use right parameter for ext4 plus eMMC mmc: host: reprogram the key to cover the invalid config case Fix OTA issue with vts fixes for new fbe framework msm: kgsl: Remove dev_err() from fenced write loop uapi: sound: Fix compilation error defconfig: msm: Enable FS related configs for Android R net:sockev: hold file reference till the sock event is sent net_sched: Add flow control support to prio qdisc msm: camera: Fix for memory leak defconfig: kona: Enable dm-crypt driver soc: qcom: Fix memcpy operations in ramdump_read md: dm-default-key: Use system sector size for SDHCI devices defconfig: msm: Enable CONFIG_STATIC_USERMODEHELPER for bengal_32 fdt: Update CRC check for rng-seed usb: phy: snps: Enable auto resume feature only in host mode msm: ipa: Fix rndis client disconnection gracefully icnss: reject idle restart if wlan driver unregistered soc: qcom: Add LLCC driver for Orchid icnss2: Decrement soc wake ref count fbdev: msm: remove mappings before iommu detach clk: qcom: mdss: Update dfps data struct for FB targets usb: pd: Register typec partner in case AAA is connected binder: update low_latency selection for binder transactions sched/walt: Improve the scheduler msm: kgsl: Use regulator_is_enabled api when gpu-quirk-cx-gdsc is defined icnss2: Send enter power save after driver suspend mmc: host: Update HS400 timing mode before performing tuning defconfig: Enable CONFIG_UTS_NS for sdm660 trace: f2fs: Fix kasan slab-out-of-bounds ANDROID: use arm-linux-androidkernel- for CROSS_COMPILE_COMPAT ANDROID: build.config.common: enable LLVM=1 NFC: Add support for core init command icnss2: Fix race condition during SOC wake req/release msm: kgsl: Don't wait for room in context queue when context is invalidated dt-bindings: msm: Add bindings for MP limit fuse support fbdev: msm: set smmu cb domain attached during probe defconfig: enable SDE rotator mm/Kconfig: forcing allocators to return ZONE_DMA32 memory power: smb5: Fix LPD flag for PMI632 ANDROID: GKI: prevent removal of monitored symbols firmware: qcom: Fix hyp_log issue soc: qcom: Fix smcinvoke_obj->fd assignment drm: increase max limit of drm open count to 128 scsi: ufs: Fix unexpected values get from ufshcd_read_desc_param() usb: gadget: Don't giveback request if ep command times out icnss2: Avoid calibration during SSR of WCN6750 ANDROID: Refresh ABI.xmls with libabigail 1.8.0-98bbf30d edac: improve gold CPU cache way parsing msm: kgsl: Update clk_set_rate() sequence for bimc_gpu_clk scsi: ufs: Fix ufs power down/on specs violation in suspend/resume path defconfig: msm: Enable CONFIG_STATIC_USERMODEHELPER for bengal_32 fdt: Update CRC check for rng-seed defconfig: Enable blk-crypto-fallback to handle sw crypto request md: dm-default-key: Use system sector size for SDHCI devices msm: sde: rotator: enable sde rotator msm: pcie: provide client the ability to control PCIe target_link_speed qcom: qpnp-fg-gen3: Continue fg_gen3_probe() when !DEBUG_FS dcc_v2: fix 1 write 1 read register configuration fail issue leds: qpnp-flash-v2: Acquire the bms_psy handle at runtime regulator: qpnp-labibb: Don't handle LAB_VREG_OK in TTW mode for pmi8998 regulator: qpnp-labibb: Add sysfs class to enable/disable the irq regulator: qpnp-lcdb: Disable the SC irq only for PM660L V1.1 and below regulator: qpnp-lcdb: Add sysfs class to enable/disable the irq cnss2: Enable self-recovery only when host driver detects linkdown ANDROID: drop KERNEL_DIR setting in build.config.common cnss2: Release qmi handle after server exit UPSTREAM: driver core: Avoid deferred probe due to fw_devlink_pause/resume() UPSTREAM: driver core: Rename dev_links_info.defer_sync to defer_hook UPSTREAM: driver core: Don't do deferred probe in parallel with kernel_init thread msm: cvp: Avoid releasing non-existent ARP buffer cnss_utils: Update wlfw power save enter/exit qmi message msm: mink: Fix copy_to_user issue crypto: Fix possible stack out of bound error mhi: core: Extend mhi_device_get_sync_atomic() for panic cases cnss2: Log a message after assert/de-assert WLAN_EN GPIO cnss2: Assert when power on retry reaches maximum usb: dwc3: gadget: Properly handle failed kick_transfer f2fs: remove blk_plugging in block_operations power: smblite-lib: Reduce the ICL immediately when flash is active qseecom: Propagate correct return value from TZ mmc: Remove unused code ANDROID: Refresh ABI.xmls with libabigail 1.8.0-1dca710a irqchip: gic-v3: Add support to get pending irqs serial: msm_geni_serial: Don't use WARN_ON for console uart mmc: core: Fix issue of no clk scaling upon previous scaling failure power: smb1390: Fix taper condition for VPH configuration cnss2: Change to add prints on link down callback dm-crypt: Skip encryption if bio is fscrypto or blk-crypto encrypted power: smblite-lib/smb5-lib: Add partner registration for microusb otg clk: qcom: rpmh: Update new clocks support on LitoMagnus arm: dma-mapping.c: add cpu sync in map_sg and unmap_sg defconfig: Enable blk-crypto-fallback to handle sw crypto request dt-bindings: clock: qcom: Add support for RPMH clocks msm: ipa4: fix the unclock gsi IPA register access clk: qcom: Add BIMC logging support during kernel panic dt-bindings: clock: Add support for BIMC clock usb: core: Don't wait for completion of urbs msm: kgsl: Enable process reclaim for A610 fuse: fix page dereference after free msm: media: uapi: Redefine NV12 format with different alignment sched/walt: Fix a potential accounting issue during window size change UPSTREAM: arm64: vdso: Build vDSO with -ffixed-x18 mhi: core: Add checks for bhie offsets ANDROID: KMI symbol lists: migrate section name usb: phy: qusb: Set the voltage to regulator according to soc capacity cnss2: Collect shadow registers for RDDM scenario mm: slub: Add debugfs interface to capture slub allocs owner msm: kgsl: Don't skip gmufw preallocations during firmware read icnss2: Export API to host driver to exit power save msm: ipa: stay in NAPI mode when default pipe has low credits vidc_3x: Fix crash in user build msm: mink: Fix copy_to_user issue msm: ipa: update the iommu mapping for WDI rings mmc: Port changes for supporting SDIO functionality to 4.19 kernel ANDROID: ABI: refresh with latest libabigail 94f5d4ae ... Conflicts: .gitignore Documentation/arm64/tagged-address-abi.rst Makefile android/abi_gki_aarch64 android/abi_gki_aarch64.xml android/abi_gki_aarch64_cuttlefish android/abi_gki_aarch64_qcom arch/Kconfig arch/arm/Kconfig arch/arm/configs/vendor/msm8937-perf_defconfig arch/arm/configs/vendor/msm8937_32go-perf_defconfig arch/arm/configs/vendor/msm8937_32go_defconfig arch/arm/configs/vendor/msm8937_defconfig arch/arm/crypto/curve25519-core.S arch/arm/crypto/poly1305-glue.c arch/arm64/Kconfig arch/arm64/boot/dts/vendor/bindings/bus/ti-sysc.txt arch/arm64/boot/dts/vendor/bindings/display/mediatek/mediatek,dpi.txt arch/arm64/boot/dts/vendor/bindings/iio/multiplexer/io-channel-mux.txt arch/arm64/boot/dts/vendor/bindings/net/fsl-fman.txt arch/arm64/boot/dts/vendor/bindings/sound/wm8994.txt arch/arm64/boot/dts/vendor/bindings/usb/dwc3.txt arch/arm64/configs/gki_defconfig arch/arm64/configs/vendor/bengal-perf_defconfig arch/arm64/configs/vendor/bengal_defconfig arch/arm64/configs/vendor/kona-perf_defconfig arch/arm64/configs/vendor/kona_defconfig arch/arm64/configs/vendor/lito-perf_defconfig arch/arm64/configs/vendor/lito_defconfig arch/arm64/configs/vendor/sdm660-perf_defconfig arch/arm64/configs/vendor/sdm660_defconfig arch/arm64/crypto/poly1305-glue.c arch/arm64/include/asm/alternative.h arch/arm64/include/asm/cpucaps.h arch/arm64/include/asm/cputype.h arch/arm64/include/asm/lse.h arch/arm64/include/asm/vdso/compat_barrier.h arch/arm64/include/asm/vdso/compat_gettimeofday.h arch/arm64/kernel/asm-offsets.c arch/arm64/kernel/cpu_errata.c arch/arm64/kernel/vdso.c arch/arm64/kernel/vdso/Makefile arch/arm64/kernel/vdso32/Makefile arch/arm64/mm/mmu.c arch/mips/crypto/Makefile arch/mips/crypto/poly1305-glue.c arch/mips/vdso/Makefile arch/x86/configs/gki_defconfig arch/x86/crypto/Makefile arch/x86/crypto/blake2s-glue.c arch/x86/crypto/poly1305_glue.c arch/x86/include/asm/vgtod.h arch/x86/kernel/cpu/common.c build.config.aarch64 build.config.common build.config.gki_kasan build.config.x86_64 crypto/Kconfig crypto/Makefile crypto/blake2s_generic.c crypto/testmgr.c crypto/testmgr.h drivers/android/binder_internal.h drivers/android/binderfs.c drivers/base/core.c drivers/base/power/wakeup_stats.c drivers/block/loop.c drivers/char/Kconfig drivers/char/adsprpc.c drivers/char/diag/diagfwd_peripheral.c drivers/char/random.c drivers/clk/qcom/clk-debug.c drivers/crypto/msm/qcedev.c drivers/devfreq/governor_gpubw_mon.c drivers/dma-buf/dma-buf.c drivers/firmware/qcom/tz_log.c drivers/gpu/drm/drm_connector.c drivers/gpu/drm/drm_mipi_dsi.c drivers/gpu/drm/drm_prime.c drivers/gpu/drm/virtio/virtgpu_ioctl.c drivers/gpu/msm/adreno_debugfs.c drivers/gpu/msm/kgsl.c drivers/gpu/msm/kgsl_device.h drivers/gpu/msm/kgsl_drawobj.c drivers/gpu/msm/kgsl_pool.c drivers/gpu/msm/kgsl_pwrctrl.c drivers/gpu/msm/kgsl_pwrctrl.h drivers/gpu/msm/kgsl_reclaim.c drivers/gpu/msm/kgsl_sharedmem.c drivers/gpu/msm/kgsl_timeline.c drivers/hid/hid-ids.h drivers/hid/hid-quirks.c drivers/hwtracing/coresight/coresight-etm-perf.c drivers/hwtracing/coresight/coresight-etm4x.c drivers/hwtracing/coresight/coresight-etm4x.h drivers/hwtracing/coresight/coresight-tmc-etr.c drivers/i2c/busses/i2c-qcom-geni.c drivers/md/dm-crypt.c drivers/md/dm-table.c drivers/md/dm-verity-target.c drivers/media/platform/msm/sde/rotator/sde_rotator_sync.c drivers/media/platform/msm/synx/synx.c drivers/media/platform/msm/synx/synx_debugfs.c drivers/media/platform/msm/synx/synx_util.c drivers/misc/Kconfig drivers/misc/Makefile drivers/misc/qseecom.c drivers/mmc/core/Kconfig drivers/mmc/core/block.c drivers/mmc/host/cqhci-crypto-qti.c drivers/mmc/host/sdhci-msm.c drivers/mmc/host/sdhci.c drivers/net/Kconfig drivers/net/ethernet/qualcomm/rmnet/rmnet_handlers.c drivers/net/wireguard/Makefile drivers/net/wireguard/allowedips.c drivers/net/wireguard/allowedips.h drivers/net/wireguard/device.c drivers/net/wireguard/device.h drivers/net/wireguard/main.c drivers/net/wireguard/peer.c drivers/net/wireguard/peer.h drivers/net/wireguard/queueing.c drivers/net/wireguard/queueing.h drivers/net/wireguard/ratelimiter.c drivers/net/wireguard/receive.c drivers/net/wireguard/selftest/allowedips.c drivers/net/wireguard/send.c drivers/net/wireguard/socket.c drivers/net/wireless/cnss2/pci.c drivers/net/wireless/mac80211_hwsim.c drivers/of/platform.c drivers/of/property.c drivers/pinctrl/qcom/pinctrl-khaje.c drivers/platform/msm/ipa/ipa_v3/ipa.c drivers/platform/msm/ipa/ipa_v3/ipa_client.c drivers/platform/msm/ipa/ipa_v3/ipa_qmi_service.c drivers/power/supply/power_supply_sysfs.c drivers/power/supply/qcom/Makefile drivers/power/supply/qcom/qg-reg.h drivers/power/supply/qcom/qpnp-qg.c drivers/power/supply/qcom/qpnp-smb5.c drivers/power/supply/qcom/smb1398-charger.c drivers/power/supply/qcom/smb5-lib.c drivers/scsi/ufs/ufshcd-crypto.c drivers/soc/qcom/crypto-qti-tz.c drivers/soc/qcom/icnss2/qmi.c drivers/soc/qcom/icnss_private.h drivers/soc/qcom/qmi_rmnet.c drivers/soc/qcom/qmi_rmnet_i.h drivers/soc/qcom/smcinvoke.c drivers/soc/qcom/socinfo.c drivers/soc/qcom/subsys-pil-tz.c drivers/spi/spi-geni-qcom.c drivers/staging/android/ion/ion.c drivers/tty/serial/msm_geni_serial.c drivers/usb/dwc3/dwc3-msm.c drivers/usb/dwc3/gadget.c drivers/usb/dwc3/gadget.h drivers/usb/gadget/composite.c drivers/usb/gadget/function/f_fs.c drivers/usb/gadget/function/f_hid.c drivers/usb/gadget/function/f_uac1.c drivers/usb/misc/ssusb-redriver-nb7vpq904m.c drivers/usb/musb/Kconfig drivers/usb/musb/mediatek.c drivers/usb/pd/policy_engine.c drivers/usb/phy/phy-msm-qusb.c drivers/usb/typec/bus.c drivers/usb/typec/mux.c drivers/video/fbdev/msm/mdss_sync.c fs/crypto/fscrypt_private.h fs/crypto/inline_crypt.c fs/crypto/keysetup.c fs/crypto/policy.c fs/ext4/dir.c fs/ext4/ext4.h fs/ext4/hash.c fs/ext4/namei.c fs/ext4/page-io.c fs/f2fs/super.c fs/incfs/data_mgmt.h fs/incfs/main.c fs/incfs/vfs.c include/crypto/blake2s.h include/crypto/chacha.h include/crypto/internal/blake2s.h include/crypto/internal/poly1305.h include/crypto/poly1305.h include/drm/drm_mipi_dsi.h include/linux/android_kabi.h include/linux/bits.h include/linux/diagchar.h include/linux/dma-buf.h include/linux/icmpv6.h include/linux/ipv6.h include/linux/page-flags-layout.h include/linux/power_supply.h include/linux/random.h include/linux/sched.h include/linux/usb/gadget.h include/net/icmp.h include/net/ndisc.h include/net/sock.h include/soc/qcom/icnss.h include/soc/qcom/socinfo.h include/trace/events/f2fs.h include/trace/events/random.h include/uapi/linux/android/binderfs.h include/uapi/linux/v4l2-controls.h include/uapi/linux/virtio_ids.h include/uapi/media/msm_camsensor_sdk.h include/uapi/media/msm_media_info.h include/vdso/bits.h include/vdso/datapage.h kernel/bpf/helpers.c kernel/cgroup/cgroup.c kernel/fork.c kernel/futex.c kernel/panic.c kernel/power/wakelock.c kernel/sched/core.c kernel/sched/cpufreq_schedutil.c kernel/sched/sched.h kernel/sched/topology.c kernel/sched/walt.h kernel/time/vsyscall.c lib/Kconfig.kasan lib/crypto/Kconfig lib/crypto/Makefile lib/crypto/blake2s-generic.c lib/crypto/blake2s-selftest.c lib/crypto/blake2s.c lib/crypto/poly1305-donna32.c lib/crypto/poly1305-donna64.c lib/crypto/poly1305.c lib/strnlen_user.c lib/test_meminit.c lib/test_stackinit.c mm/kasan/common.c mm/page_alloc.c mm/page_io.c net/core/filter.c net/ipv4/icmp.c net/ipv6/ip6_icmp.c net/sctp/input.c net/unix/scm.c net/wireless/core.c net/xfrm/xfrm_compat.c net/xfrm/xfrm_state.c net/xfrm/xfrm_user.c scripts/adjust_autoksyms.sh scripts/generate_initcall_order.pl scripts/setlocalversion scripts/tools-support-relr.sh security/Kconfig.hardening security/selinux/hooks.c security/selinux/include/classmap.h security/selinux/include/security.h security/selinux/nlmsgtab.c security/selinux/ss/mls.c security/selinux/ss/policydb.c security/selinux/ss/policydb.h security/selinux/ss/services.c tools/testing/selftests/wireguard/netns.sh tools/testing/selftests/wireguard/qemu/kernel.config Change-Id: I5992ee11f94595fd75ea4cf60b15fe7eee0f28ad |
||
---|---|---|
.. | ||
alpha | ||
arc | ||
arm | ||
arm64 | ||
c6x | ||
h8300 | ||
hexagon | ||
ia64 | ||
m68k | ||
microblaze | ||
mips | ||
nds32 | ||
nios2 | ||
openrisc | ||
parisc | ||
powerpc | ||
riscv | ||
s390 | ||
sh | ||
sparc | ||
um | ||
unicore32 | ||
x86 | ||
xtensa | ||
.gitignore | ||
Kconfig |