android_kernel_motorola_sm6225/arch/m68k/mm/fault.c
Johannes Weiner 759496ba64 arch: mm: pass userspace fault flag to generic fault handler
Unlike global OOM handling, memory cgroup code will invoke the OOM killer
in any OOM situation because it has no way of telling faults occuring in
kernel context - which could be handled more gracefully - from
user-triggered faults.

Pass a flag that identifies faults originating in user space from the
architecture-specific fault handlers to generic code so that memcg OOM
handling can be improved.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:01 -07:00

226 lines
5.3 KiB
C

/*
* linux/arch/m68k/mm/fault.c
*
* Copyright (C) 1995 Hamish Macdonald
*/
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/ptrace.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <asm/setup.h>
#include <asm/traps.h>
#include <asm/uaccess.h>
#include <asm/pgalloc.h>
extern void die_if_kernel(char *, struct pt_regs *, long);
int send_fault_sig(struct pt_regs *regs)
{
siginfo_t siginfo = { 0, 0, 0, };
siginfo.si_signo = current->thread.signo;
siginfo.si_code = current->thread.code;
siginfo.si_addr = (void *)current->thread.faddr;
#ifdef DEBUG
printk("send_fault_sig: %p,%d,%d\n", siginfo.si_addr, siginfo.si_signo, siginfo.si_code);
#endif
if (user_mode(regs)) {
force_sig_info(siginfo.si_signo,
&siginfo, current);
} else {
if (handle_kernel_fault(regs))
return -1;
//if (siginfo.si_signo == SIGBUS)
// force_sig_info(siginfo.si_signo,
// &siginfo, current);
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
if ((unsigned long)siginfo.si_addr < PAGE_SIZE)
printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
else
printk(KERN_ALERT "Unable to handle kernel access");
printk(" at virtual address %p\n", siginfo.si_addr);
die_if_kernel("Oops", regs, 0 /*error_code*/);
do_exit(SIGKILL);
}
return 1;
}
/*
* This routine handles page faults. It determines the problem, and
* then passes it off to one of the appropriate routines.
*
* error_code:
* bit 0 == 0 means no page found, 1 means protection fault
* bit 1 == 0 means read, 1 means write
*
* If this routine detects a bad access, it returns 1, otherwise it
* returns 0.
*/
int do_page_fault(struct pt_regs *regs, unsigned long address,
unsigned long error_code)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct * vma;
int fault;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
#ifdef DEBUG
printk ("do page fault:\nregs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld, %p\n",
regs->sr, regs->pc, address, error_code,
current->mm->pgd);
#endif
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
if (in_atomic() || !mm)
goto no_context;
if (user_mode(regs))
flags |= FAULT_FLAG_USER;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
goto map_err;
if (vma->vm_flags & VM_IO)
goto acc_err;
if (vma->vm_start <= address)
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto map_err;
if (user_mode(regs)) {
/* Accessing the stack below usp is always a bug. The
"+ 256" is there due to some instructions doing
pre-decrement on the stack and that doesn't show up
until later. */
if (address + 256 < rdusp())
goto map_err;
}
if (expand_stack(vma, address))
goto map_err;
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
good_area:
#ifdef DEBUG
printk("do_page_fault: good_area\n");
#endif
switch (error_code & 3) {
default: /* 3: write, present */
/* fall through */
case 2: /* write, not present */
if (!(vma->vm_flags & VM_WRITE))
goto acc_err;
flags |= FAULT_FLAG_WRITE;
break;
case 1: /* read, present */
goto acc_err;
case 0: /* read, not present */
if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
goto acc_err;
}
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(mm, vma, address, flags);
#ifdef DEBUG
printk("handle_mm_fault returns %d\n",fault);
#endif
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
return 0;
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
else if (fault & VM_FAULT_SIGBUS)
goto bus_err;
BUG();
}
/*
* Major/minor page fault accounting is only done on the
* initial attempt. If we go through a retry, it is extremely
* likely that the page will be found in page cache at that point.
*/
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR)
current->maj_flt++;
else
current->min_flt++;
if (fault & VM_FAULT_RETRY) {
/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
* of starvation. */
flags &= ~FAULT_FLAG_ALLOW_RETRY;
flags |= FAULT_FLAG_TRIED;
/*
* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);
return 0;
/*
* We ran out of memory, or some other thing happened to us that made
* us unable to handle the page fault gracefully.
*/
out_of_memory:
up_read(&mm->mmap_sem);
if (!user_mode(regs))
goto no_context;
pagefault_out_of_memory();
return 0;
no_context:
current->thread.signo = SIGBUS;
current->thread.faddr = address;
return send_fault_sig(regs);
bus_err:
current->thread.signo = SIGBUS;
current->thread.code = BUS_ADRERR;
current->thread.faddr = address;
goto send_sig;
map_err:
current->thread.signo = SIGSEGV;
current->thread.code = SEGV_MAPERR;
current->thread.faddr = address;
goto send_sig;
acc_err:
current->thread.signo = SIGSEGV;
current->thread.code = SEGV_ACCERR;
current->thread.faddr = address;
send_sig:
up_read(&mm->mmap_sem);
return send_fault_sig(regs);
}