8b4ac6f316
This patch clears PCI errors after showing more debug informations. Signed-off-by: Florian Fainelli <florian.fainelli@int-evry.fr> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
318 lines
8.3 KiB
C
318 lines
8.3 KiB
C
/*
|
|
* BRIEF MODULE DESCRIPTION
|
|
* Alchemy/AMD Au1x00 pci support.
|
|
*
|
|
* Copyright 2001,2002,2003 MontaVista Software Inc.
|
|
* Author: MontaVista Software, Inc.
|
|
* ppopov@mvista.com or source@mvista.com
|
|
*
|
|
* Support for all devices (greater than 16) added by David Gathright.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
|
|
#undef DEBUG
|
|
#ifdef DEBUG
|
|
#define DBG(x...) printk(x)
|
|
#else
|
|
#define DBG(x...)
|
|
#endif
|
|
|
|
#define PCI_ACCESS_READ 0
|
|
#define PCI_ACCESS_WRITE 1
|
|
|
|
|
|
int (*board_pci_idsel)(unsigned int devsel, int assert);
|
|
|
|
void mod_wired_entry(int entry, unsigned long entrylo0,
|
|
unsigned long entrylo1, unsigned long entryhi,
|
|
unsigned long pagemask)
|
|
{
|
|
unsigned long old_pagemask;
|
|
unsigned long old_ctx;
|
|
|
|
/* Save old context and create impossible VPN2 value */
|
|
old_ctx = read_c0_entryhi() & 0xff;
|
|
old_pagemask = read_c0_pagemask();
|
|
write_c0_index(entry);
|
|
write_c0_pagemask(pagemask);
|
|
write_c0_entryhi(entryhi);
|
|
write_c0_entrylo0(entrylo0);
|
|
write_c0_entrylo1(entrylo1);
|
|
tlb_write_indexed();
|
|
write_c0_entryhi(old_ctx);
|
|
write_c0_pagemask(old_pagemask);
|
|
}
|
|
|
|
struct vm_struct *pci_cfg_vm;
|
|
static int pci_cfg_wired_entry;
|
|
static int first_cfg = 1;
|
|
unsigned long last_entryLo0, last_entryLo1;
|
|
|
|
static int config_access(unsigned char access_type, struct pci_bus *bus,
|
|
unsigned int dev_fn, unsigned char where,
|
|
u32 * data)
|
|
{
|
|
#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
|
|
unsigned int device = PCI_SLOT(dev_fn);
|
|
unsigned int function = PCI_FUNC(dev_fn);
|
|
unsigned long offset, status;
|
|
unsigned long cfg_base;
|
|
unsigned long flags;
|
|
int error = PCIBIOS_SUCCESSFUL;
|
|
unsigned long entryLo0, entryLo1;
|
|
|
|
if (device > 19) {
|
|
*data = 0xffffffff;
|
|
return -1;
|
|
}
|
|
|
|
local_irq_save(flags);
|
|
au_writel(((0x2000 << 16) | (au_readl(Au1500_PCI_STATCMD) & 0xffff)),
|
|
Au1500_PCI_STATCMD);
|
|
au_sync_udelay(1);
|
|
|
|
/*
|
|
* We can't ioremap the entire pci config space because it's
|
|
* too large. Nor can we call ioremap dynamically because some
|
|
* device drivers use the pci config routines from within
|
|
* interrupt handlers and that becomes a problem in get_vm_area().
|
|
* We use one wired tlb to handle all config accesses for all
|
|
* busses. To improve performance, if the current device
|
|
* is the same as the last device accessed, we don't touch the
|
|
* tlb.
|
|
*/
|
|
if (first_cfg) {
|
|
/* reserve a wired entry for pci config accesses */
|
|
first_cfg = 0;
|
|
pci_cfg_vm = get_vm_area(0x2000, VM_IOREMAP);
|
|
if (!pci_cfg_vm)
|
|
panic (KERN_ERR "PCI unable to get vm area\n");
|
|
pci_cfg_wired_entry = read_c0_wired();
|
|
add_wired_entry(0, 0, (unsigned long)pci_cfg_vm->addr, PM_4K);
|
|
last_entryLo0 = last_entryLo1 = 0xffffffff;
|
|
}
|
|
|
|
/* Allow board vendors to implement their own off-chip idsel.
|
|
* If it doesn't succeed, may as well bail out at this point.
|
|
*/
|
|
if (board_pci_idsel) {
|
|
if (board_pci_idsel(device, 1) == 0) {
|
|
*data = 0xffffffff;
|
|
local_irq_restore(flags);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* setup the config window */
|
|
if (bus->number == 0) {
|
|
cfg_base = ((1<<device)<<11);
|
|
} else {
|
|
cfg_base = 0x80000000 | (bus->number<<16) | (device<<11);
|
|
}
|
|
|
|
/* setup the lower bits of the 36 bit address */
|
|
offset = (function << 8) | (where & ~0x3);
|
|
/* pick up any address that falls below the page mask */
|
|
offset |= cfg_base & ~PAGE_MASK;
|
|
|
|
/* page boundary */
|
|
cfg_base = cfg_base & PAGE_MASK;
|
|
|
|
entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
|
|
entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
|
|
|
|
if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
|
|
mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
|
|
(unsigned long)pci_cfg_vm->addr, PM_4K);
|
|
last_entryLo0 = entryLo0;
|
|
last_entryLo1 = entryLo1;
|
|
}
|
|
|
|
if (access_type == PCI_ACCESS_WRITE) {
|
|
au_writel(*data, (int)(pci_cfg_vm->addr + offset));
|
|
} else {
|
|
*data = au_readl((int)(pci_cfg_vm->addr + offset));
|
|
}
|
|
au_sync_udelay(2);
|
|
|
|
DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n",
|
|
access_type, bus->number, device, where, *data, offset);
|
|
|
|
/* check master abort */
|
|
status = au_readl(Au1500_PCI_STATCMD);
|
|
|
|
if (status & (1<<29)) {
|
|
*data = 0xffffffff;
|
|
error = -1;
|
|
DBG("Au1x Master Abort\n");
|
|
} else if ((status >> 28) & 0xf) {
|
|
DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf));
|
|
|
|
/* clear errors */
|
|
au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
|
|
|
|
*data = 0xffffffff;
|
|
error = -1;
|
|
}
|
|
|
|
/* Take away the idsel.
|
|
*/
|
|
if (board_pci_idsel) {
|
|
(void)board_pci_idsel(device, 0);
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
return error;
|
|
#endif
|
|
}
|
|
|
|
static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u8 * val)
|
|
{
|
|
u32 data;
|
|
int ret;
|
|
|
|
ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
|
|
if (where & 1)
|
|
data >>= 8;
|
|
if (where & 2)
|
|
data >>= 16;
|
|
*val = data & 0xff;
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int read_config_word(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u16 * val)
|
|
{
|
|
u32 data;
|
|
int ret;
|
|
|
|
ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
|
|
if (where & 2)
|
|
data >>= 16;
|
|
*val = data & 0xffff;
|
|
return ret;
|
|
}
|
|
|
|
static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
|
|
int where, u32 * val)
|
|
{
|
|
int ret;
|
|
|
|
ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
|
|
u8 val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
|
|
return -1;
|
|
|
|
data = (data & ~(0xff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
|
|
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
|
|
return -1;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int
|
|
write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
|
|
u16 val)
|
|
{
|
|
u32 data = 0;
|
|
|
|
if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
|
|
return -1;
|
|
|
|
data = (data & ~(0xffff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
|
|
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
|
|
return -1;
|
|
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int
|
|
write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
|
|
u32 val)
|
|
{
|
|
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
|
|
return -1;
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int config_read(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 * val)
|
|
{
|
|
switch (size) {
|
|
case 1: {
|
|
u8 _val;
|
|
int rc = read_config_byte(bus, devfn, where, &_val);
|
|
*val = _val;
|
|
return rc;
|
|
}
|
|
case 2: {
|
|
u16 _val;
|
|
int rc = read_config_word(bus, devfn, where, &_val);
|
|
*val = _val;
|
|
return rc;
|
|
}
|
|
default:
|
|
return read_config_dword(bus, devfn, where, val);
|
|
}
|
|
}
|
|
|
|
static int config_write(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
switch (size) {
|
|
case 1:
|
|
return write_config_byte(bus, devfn, where, (u8) val);
|
|
case 2:
|
|
return write_config_word(bus, devfn, where, (u16) val);
|
|
default:
|
|
return write_config_dword(bus, devfn, where, val);
|
|
}
|
|
}
|
|
|
|
|
|
struct pci_ops au1x_pci_ops = {
|
|
config_read,
|
|
config_write
|
|
};
|