Helmut Schaa 7fe7ee7776 rt2x00: Generate sw sequence numbers only for devices that need it ... Newer devices like rt2800* own a hardware sequence counter and thus don't need to use a software sequence counter at all. Add a new driver flag to shortcut the software sequence number generation on devices that don't need it. rt61pci, rt73usb and rt2800* seem to make use of a hw sequence counter while rt2400pci and rt2500* need to do it in software. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2011-03-04 14:06:47 -05:00
..
Kconfig	rt2x00: Add support for RT5390 chip	2011-02-21 15:40:00 -05:00
Makefile
rt2x00.h	rt2x00: Generate sw sequence numbers only for devices that need it	2011-03-04 14:06:47 -05:00
rt2x00config.c	rt2x00: Fix pointer errors.	2011-01-04 14:35:14 -05:00
rt2x00crypto.c
rt2x00debug.c	rt2x00: Protect queue control with mutex	2010-12-13 15:23:35 -05:00
rt2x00debug.h
rt2x00dev.c	rt2x00: Move TX/RX work into dedicated workqueue	2011-01-31 15:06:25 -05:00
rt2x00dump.h
rt2x00firmware.c	rt2x00: Don't leak mem in error path of rt2x00lib_request_firmware()	2011-01-13 15:46:45 -05:00
rt2x00ht.c	rt2x00: Remove superfluos empty line	2011-02-21 15:39:59 -05:00
rt2x00leds.c
rt2x00leds.h
rt2x00lib.h	rt2x00: Introduce beacon_update_locked that requires caller locking	2011-01-31 15:06:22 -05:00
rt2x00link.c	rt2x00: Move TX/RX work into dedicated workqueue	2011-01-31 15:06:25 -05:00
rt2x00mac.c	rt2x00: Use unlikely for unexpected error condition in rt2x00_mac_tx	2011-03-04 14:06:47 -05:00
rt2x00pci.c	rt2x00: Remove interrupt thread registration	2011-01-31 15:06:23 -05:00
rt2x00pci.h	rt2x00: Fix firmware loading regression on x86_64.	2010-12-13 15:23:37 -05:00
rt2x00queue.c	rt2x00: Generate sw sequence numbers only for devices that need it	2011-03-04 14:06:47 -05:00
rt2x00queue.h	rt2x00: Fix WMM Queue naming	2010-12-13 15:23:36 -05:00
rt2x00reg.h	rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR	2011-01-31 15:06:24 -05:00
rt2x00soc.c	rt2x00: Use ioremap for SoC devices instead of KSEG1ADDR.	2010-11-17 16:18:54 -05:00
rt2x00soc.h
rt2x00usb.c	rt2x00: Move TX/RX work into dedicated workqueue	2011-01-31 15:06:25 -05:00
rt2x00usb.h	rt2x00: Add "flush" queue command	2010-12-13 15:23:35 -05:00
rt61pci.c	rt2x00: Optimize calls to rt2x00queue_get_queue	2011-03-04 14:06:46 -05:00
rt61pci.h	rt2x00: Fix WMM Queue naming	2010-12-13 15:23:36 -05:00
rt73usb.c	rt2x00: Optimize calls to rt2x00queue_get_queue	2011-03-04 14:06:46 -05:00
rt73usb.h	rt2x00: Fix WMM Queue naming	2010-12-13 15:23:36 -05:00
rt2400pci.c	rt2x00: Generate sw sequence numbers only for devices that need it	2011-03-04 14:06:47 -05:00
rt2400pci.h	rt2x00: checkpatch.pl error fixes for rt2400pci.h	2010-11-15 13:26:13 -05:00
rt2500pci.c	rt2x00: Generate sw sequence numbers only for devices that need it	2011-03-04 14:06:47 -05:00
rt2500pci.h	rt2x00: checkpatch.pl error fixes for rt2500pci.h	2010-11-15 13:26:15 -05:00
rt2500usb.c	rt2x00: Generate sw sequence numbers only for devices that need it	2011-03-04 14:06:47 -05:00
rt2500usb.h
rt2800.h	rt2x00: fix whitespace damage in the rt2800 specific code	2011-03-04 14:05:18 -05:00
rt2800lib.c	rt2x00: Add unlikely macro to special case tx status handling	2011-03-04 14:06:47 -05:00
rt2800lib.h	rt2x00: Refactor beacon code to make use of start- and stop_queue	2011-01-31 15:06:22 -05:00
rt2800pci.c	rt2x00: Make use of unlikely during tx status processing	2011-03-04 14:06:46 -05:00
rt2800pci.h	rt2x00: checkpatch.pl error fixes for rt2800pci.h	2010-11-15 13:26:20 -05:00
rt2800usb.c	rt2x00: Fix WPA TKIP Michael MIC failures.	2011-01-31 15:06:24 -05:00
rt2800usb.h	rt2x00: checkpatch.pl error fixes for rt2800usb.h	2010-11-15 13:26:23 -05:00