asgardius/android_kernel_motorola_sm6225
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_motorola_sm6225/arch/sparc64/kernel/head.S
David S. Miller 5fd29752f0 [SPARC64]: Fix fault handling in unaligned trap handler. 
We were not calling kernel_mna_trap_fault() correctly.
Instead of being fancy, just return 0 vs. -EFAULT from
the assembler stubs, and handle that return value as
appropriate.

Create an "__retl_efault" stub for assembler exception
table entries and use it where possible.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-28 20:41:45 -07:00

550 lines
13 KiB
ArmAsm
Raw Blame History

/* $Id: head.S,v 1.87 2002/02/09 19:49:31 davem Exp $
* head.S: Initial boot code for the Sparc64 port of Linux.
*
* Copyright (C) 1996,1997 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1996 David Sitsky (David.Sitsky@anu.edu.au)
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
* Copyright (C) 1997 Miguel de Icaza (miguel@nuclecu.unam.mx)
*/
#include <linux/config.h>
#include <linux/version.h>
#include <linux/errno.h>
#include <asm/thread_info.h>
#include <asm/asi.h>
#include <asm/pstate.h>
#include <asm/ptrace.h>
#include <asm/spitfire.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/errno.h>
#include <asm/signal.h>
#include <asm/processor.h>
#include <asm/lsu.h>
#include <asm/dcr.h>
#include <asm/dcu.h>
#include <asm/head.h>
#include <asm/ttable.h>
#include <asm/mmu.h>
/* This section from from _start to sparc64_boot_end should fit into
* 0x0000.0000.0040.4000 to 0x0000.0000.0040.8000 and will be sharing space
* with bootup_user_stack, which is from 0x0000.0000.0040.4000 to
* 0x0000.0000.0040.6000 and empty_bad_page, which is from
* 0x0000.0000.0040.6000 to 0x0000.0000.0040.8000.
*/
.text
.globl start, _start, stext, _stext
_start:
start:
_stext:
stext:
bootup_user_stack:
! 0x0000000000404000
b sparc64_boot
flushw /* Flush register file. */
/* This stuff has to be in sync with SILO and other potential boot loaders
* Fields should be kept upward compatible and whenever any change is made,
* HdrS version should be incremented.
*/
.global root_flags, ram_flags, root_dev
.global sparc_ramdisk_image, sparc_ramdisk_size
.global sparc_ramdisk_image64
.ascii "HdrS"
.word LINUX_VERSION_CODE
/* History:
*
* 0x0300 : Supports being located at other than 0x4000
* 0x0202 : Supports kernel params string
* 0x0201 : Supports reboot_command
*/
.half 0x0301 /* HdrS version */
root_flags:
.half 1
root_dev:
.half 0
ram_flags:
.half 0
sparc_ramdisk_image:
.word 0
sparc_ramdisk_size:
.word 0
.xword reboot_command
.xword bootstr_info
sparc_ramdisk_image64:
.xword 0
.word _end
/* PROM cif handler code address is in %o4. */
sparc64_boot:
1: rd %pc, %g7
set 1b, %g1
cmp %g1, %g7
be,pn %xcc, sparc64_boot_after_remap
mov %o4, %l7
/* We need to remap the kernel. Use position independant
* code to remap us to KERNBASE.
*
* SILO can invoke us with 32-bit address masking enabled,
* so make sure that's clear.
*/
rdpr %pstate, %g1
andn %g1, PSTATE_AM, %g1
wrpr %g1, 0x0, %pstate
ba,a,pt %xcc, 1f
.globl prom_finddev_name, prom_chosen_path
.globl prom_getprop_name, prom_mmu_name
.globl prom_callmethod_name, prom_translate_name
.globl prom_map_name, prom_unmap_name, prom_mmu_ihandle_cache
.globl prom_boot_mapped_pc, prom_boot_mapping_mode
.globl prom_boot_mapping_phys_high, prom_boot_mapping_phys_low
prom_finddev_name:
.asciz "finddevice"
prom_chosen_path:
.asciz "/chosen"
prom_getprop_name:
.asciz "getprop"
prom_mmu_name:
.asciz "mmu"
prom_callmethod_name:
.asciz "call-method"
prom_translate_name:
.asciz "translate"
prom_map_name:
.asciz "map"
prom_unmap_name:
.asciz "unmap"
.align 4
prom_mmu_ihandle_cache:
.word 0
prom_boot_mapped_pc:
.word 0
prom_boot_mapping_mode:
.word 0
.align 8
prom_boot_mapping_phys_high:
.xword 0
prom_boot_mapping_phys_low:
.xword 0
1:
rd %pc, %l0
mov (1b - prom_finddev_name), %l1
mov (1b - prom_chosen_path), %l2
mov (1b - prom_boot_mapped_pc), %l3
sub %l0, %l1, %l1
sub %l0, %l2, %l2
sub %l0, %l3, %l3
stw %l0, [%l3]
sub %sp, (192 + 128), %sp
/* chosen_node = prom_finddevice("/chosen") */
stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "finddevice"
mov 1, %l3
stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 1
stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1
stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1, "/chosen"
stx %g0, [%sp + 2047 + 128 + 0x20] ! ret1
call %l7
add %sp, (2047 + 128), %o0 ! argument array
ldx [%sp + 2047 + 128 + 0x20], %l4 ! chosen device node
mov (1b - prom_getprop_name), %l1
mov (1b - prom_mmu_name), %l2
mov (1b - prom_mmu_ihandle_cache), %l5
sub %l0, %l1, %l1
sub %l0, %l2, %l2
sub %l0, %l5, %l5
/* prom_mmu_ihandle_cache = prom_getint(chosen_node, "mmu") */
stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "getprop"
mov 4, %l3
stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 4
mov 1, %l3
stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1
stx %l4, [%sp + 2047 + 128 + 0x18] ! arg1, chosen_node
stx %l2, [%sp + 2047 + 128 + 0x20] ! arg2, "mmu"
stx %l5, [%sp + 2047 + 128 + 0x28] ! arg3, &prom_mmu_ihandle_cache
mov 4, %l3
stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4, sizeof(arg3)
stx %g0, [%sp + 2047 + 128 + 0x38] ! ret1
call %l7
add %sp, (2047 + 128), %o0 ! argument array
mov (1b - prom_callmethod_name), %l1
mov (1b - prom_translate_name), %l2
sub %l0, %l1, %l1
sub %l0, %l2, %l2
lduw [%l5], %l5 ! prom_mmu_ihandle_cache
stx %l1, [%sp + 2047 + 128 + 0x00] ! service, "call-method"
mov 3, %l3
stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 3
mov 5, %l3
stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 5
stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1: "translate"
stx %l5, [%sp + 2047 + 128 + 0x20] ! arg2: prom_mmu_ihandle_cache
srlx %l0, 22, %l3
sllx %l3, 22, %l3
stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: vaddr, our PC
stx %g0, [%sp + 2047 + 128 + 0x30] ! res1
stx %g0, [%sp + 2047 + 128 + 0x38] ! res2
stx %g0, [%sp + 2047 + 128 + 0x40] ! res3
stx %g0, [%sp + 2047 + 128 + 0x48] ! res4
stx %g0, [%sp + 2047 + 128 + 0x50] ! res5
call %l7
add %sp, (2047 + 128), %o0 ! argument array
ldx [%sp + 2047 + 128 + 0x40], %l1 ! translation mode
mov (1b - prom_boot_mapping_mode), %l4
sub %l0, %l4, %l4
stw %l1, [%l4]
mov (1b - prom_boot_mapping_phys_high), %l4
sub %l0, %l4, %l4
ldx [%sp + 2047 + 128 + 0x48], %l2 ! physaddr high
stx %l2, [%l4 + 0x0]
ldx [%sp + 2047 + 128 + 0x50], %l3 ! physaddr low
stx %l3, [%l4 + 0x8]
/* Leave service as-is, "call-method" */
mov 7, %l3
stx %l3, [%sp + 2047 + 128 + 0x08] ! num_args, 7
mov 1, %l3
stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 1
mov (1b - prom_map_name), %l3
sub %l0, %l3, %l3
stx %l3, [%sp + 2047 + 128 + 0x18] ! arg1: "map"
/* Leave arg2 as-is, prom_mmu_ihandle_cache */
mov -1, %l3
stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: mode (-1 default)
sethi %hi(8 * 1024 * 1024), %l3
stx %l3, [%sp + 2047 + 128 + 0x30] ! arg4: size (8MB)
sethi %hi(KERNBASE), %l3
stx %l3, [%sp + 2047 + 128 + 0x38] ! arg5: vaddr (KERNBASE)
stx %g0, [%sp + 2047 + 128 + 0x40] ! arg6: empty
mov (1b - prom_boot_mapping_phys_low), %l3
sub %l0, %l3, %l3
ldx [%l3], %l3
stx %l3, [%sp + 2047 + 128 + 0x48] ! arg7: phys addr
call %l7
add %sp, (2047 + 128), %o0 ! argument array
add %sp, (192 + 128), %sp
sparc64_boot_after_remap:
BRANCH_IF_CHEETAH_BASE(g1,g7,cheetah_boot)
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,cheetah_plus_boot)
ba,pt %xcc, spitfire_boot
nop
cheetah_plus_boot:
/* Preserve OBP chosen DCU and DCR register settings. */
ba,pt %xcc, cheetah_generic_boot
nop
cheetah_boot:
mov DCR_BPE | DCR_RPE | DCR_SI | DCR_IFPOE | DCR_MS, %g1
wr %g1, %asr18
sethi %uhi(DCU_ME|DCU_RE|DCU_HPE|DCU_SPE|DCU_SL|DCU_WE), %g7
or %g7, %ulo(DCU_ME|DCU_RE|DCU_HPE|DCU_SPE|DCU_SL|DCU_WE), %g7
sllx %g7, 32, %g7
or %g7, DCU_DM | DCU_IM | DCU_DC | DCU_IC, %g7
stxa %g7, [%g0] ASI_DCU_CONTROL_REG
membar #Sync
cheetah_generic_boot:
mov TSB_EXTENSION_P, %g3
stxa %g0, [%g3] ASI_DMMU
stxa %g0, [%g3] ASI_IMMU
membar #Sync
mov TSB_EXTENSION_S, %g3
stxa %g0, [%g3] ASI_DMMU
membar #Sync
mov TSB_EXTENSION_N, %g3
stxa %g0, [%g3] ASI_DMMU
stxa %g0, [%g3] ASI_IMMU
membar #Sync
ba,a,pt %xcc, jump_to_sun4u_init
spitfire_boot:
/* Typically PROM has already enabled both MMU's and both on-chip
* caches, but we do it here anyway just to be paranoid.
*/
mov (LSU_CONTROL_IC|LSU_CONTROL_DC|LSU_CONTROL_IM|LSU_CONTROL_DM), %g1
stxa %g1, [%g0] ASI_LSU_CONTROL
membar #Sync
jump_to_sun4u_init:
/*
* Make sure we are in privileged mode, have address masking,
* using the ordinary globals and have enabled floating
* point.
*
* Again, typically PROM has left %pil at 13 or similar, and
* (PSTATE_PRIV | PSTATE_PEF | PSTATE_IE) in %pstate.
*/
wrpr %g0, (PSTATE_PRIV|PSTATE_PEF|PSTATE_IE), %pstate
wr %g0, 0, %fprs
set sun4u_init, %g2
jmpl %g2 + %g0, %g0
nop
sun4u_init:
/* Set ctx 0 */
mov PRIMARY_CONTEXT, %g7
stxa %g0, [%g7] ASI_DMMU
membar #Sync
mov SECONDARY_CONTEXT, %g7
stxa %g0, [%g7] ASI_DMMU
membar #Sync
BRANCH_IF_ANY_CHEETAH(g1,g7,cheetah_tlb_fixup)
ba,pt %xcc, spitfire_tlb_fixup
nop
cheetah_tlb_fixup:
mov 2, %g2 /* Set TLB type to cheetah+. */
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
mov 1, %g2 /* Set TLB type to cheetah. */
1: sethi %hi(tlb_type), %g1
stw %g2, [%g1 + %lo(tlb_type)]
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f)
ba,pt %xcc, 2f
nop
1: /* Patch context register writes to support nucleus page
* size correctly.
*/
call cheetah_plus_patch_etrap
nop
call cheetah_plus_patch_rtrap
nop
call cheetah_plus_patch_fpdis
nop
call cheetah_plus_patch_winfixup
nop
2: /* Patch copy/page operations to cheetah optimized versions. */
call cheetah_patch_copyops
nop
call cheetah_patch_copy_page
nop
call cheetah_patch_cachetlbops
nop
ba,pt %xcc, tlb_fixup_done
nop
spitfire_tlb_fixup:
/* Set TLB type to spitfire. */
mov 0, %g2
sethi %hi(tlb_type), %g1
stw %g2, [%g1 + %lo(tlb_type)]
tlb_fixup_done:
sethi %hi(init_thread_union), %g6
or %g6, %lo(init_thread_union), %g6
ldx [%g6 + TI_TASK], %g4
mov %sp, %l6
mov %o4, %l7
wr %g0, ASI_P, %asi
mov 1, %g1
sllx %g1, THREAD_SHIFT, %g1
sub %g1, (STACKFRAME_SZ + STACK_BIAS), %g1
add %g6, %g1, %sp
mov 0, %fp
/* Set per-cpu pointer initially to zero, this makes
* the boot-cpu use the in-kernel-image per-cpu areas
* before setup_per_cpu_area() is invoked.
*/
clr %g5
wrpr %g0, 0, %wstate
wrpr %g0, 0x0, %tl
/* Clear the bss */
sethi %hi(__bss_start), %o0
or %o0, %lo(__bss_start), %o0
sethi %hi(_end), %o1
or %o1, %lo(_end), %o1
call __bzero
sub %o1, %o0, %o1
mov %l6, %o1 ! OpenPROM stack
call prom_init
mov %l7, %o0 ! OpenPROM cif handler
/* Off we go.... */
call start_kernel
nop
/* Not reached... */
/* IMPORTANT NOTE: Whenever making changes here, check
* trampoline.S as well. -jj */
.globl setup_tba
setup_tba: /* i0 = is_starfire */
save %sp, -160, %sp
rdpr %tba, %g7
sethi %hi(prom_tba), %o1
or %o1, %lo(prom_tba), %o1
stx %g7, [%o1]
/* Setup "Linux" globals 8-) */
rdpr %pstate, %o1
mov %g6, %o2
wrpr %o1, (PSTATE_AG|PSTATE_IE), %pstate
sethi %hi(sparc64_ttable_tl0), %g1
wrpr %g1, %tba
mov %o2, %g6
/* Set up MMU globals */
wrpr %o1, (PSTATE_MG|PSTATE_IE), %pstate
/* Set fixed globals used by dTLB miss handler. */
#define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000)
#define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W)
mov TSB_REG, %g1
stxa %g0, [%g1] ASI_DMMU
membar #Sync
stxa %g0, [%g1] ASI_IMMU
membar #Sync
mov TLB_SFSR, %g1
sethi %uhi(KERN_HIGHBITS), %g2
or %g2, %ulo(KERN_HIGHBITS), %g2
sllx %g2, 32, %g2
or %g2, KERN_LOWBITS, %g2
BRANCH_IF_ANY_CHEETAH(g3,g7,cheetah_vpte_base)
ba,pt %xcc, spitfire_vpte_base
nop
cheetah_vpte_base:
sethi %uhi(VPTE_BASE_CHEETAH), %g3
or %g3, %ulo(VPTE_BASE_CHEETAH), %g3
ba,pt %xcc, 2f
sllx %g3, 32, %g3
spitfire_vpte_base:
sethi %uhi(VPTE_BASE_SPITFIRE), %g3
or %g3, %ulo(VPTE_BASE_SPITFIRE), %g3
sllx %g3, 32, %g3
2:
clr %g7
#undef KERN_HIGHBITS
#undef KERN_LOWBITS
/* Kill PROM timer */
sethi %hi(0x80000000), %o2
sllx %o2, 32, %o2
wr %o2, 0, %tick_cmpr
BRANCH_IF_ANY_CHEETAH(o2,o3,1f)
ba,pt %xcc, 2f
nop
/* Disable STICK_INT interrupts. */
1:
sethi %hi(0x80000000), %o2
sllx %o2, 32, %o2
wr %o2, %asr25
/* Ok, we're done setting up all the state our trap mechanims needs,
* now get back into normal globals and let the PROM know what is up.
*/
2:
wrpr %g0, %g0, %wstate
wrpr %o1, PSTATE_IE, %pstate
call init_irqwork_curcpu
nop
call prom_set_trap_table
sethi %hi(sparc64_ttable_tl0), %o0
BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f)
ba,pt %xcc, 2f
nop
1: /* Start using proper page size encodings in ctx register. */
sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3
mov PRIMARY_CONTEXT, %g1
sllx %g3, 32, %g3
sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2
or %g3, %g2, %g3
stxa %g3, [%g1] ASI_DMMU
membar #Sync
2:
rdpr %pstate, %o1
or %o1, PSTATE_IE, %o1
wrpr %o1, 0, %pstate
ret
restore
/*
* The following skips make sure the trap table in ttable.S is aligned
* on a 32K boundary as required by the v9 specs for TBA register.
*/
sparc64_boot_end:
.skip 0x2000 + _start - sparc64_boot_end
bootup_user_stack_end:
.skip 0x2000
#ifdef CONFIG_SBUS
/* This is just a hack to fool make depend config.h discovering
strategy: As the .S files below need config.h, but
make depend does not find it for them, we include config.h
in head.S */
#endif
! 0x0000000000408000
#include "ttable.S"
#include "systbls.S"
#include "ktlb.S"
#include "etrap.S"
#include "rtrap.S"
#include "winfixup.S"
#include "entry.S"
/* This is just anal retentiveness on my part... */
.align 16384
.data
.align 8
.globl prom_tba, tlb_type
prom_tba: .xword 0
tlb_type: .word 0 /* Must NOT end up in BSS */
.section ".fixup",#alloc,#execinstr
.globl __ret_efault, __retl_efault
__ret_efault:
ret
restore %g0, -EFAULT, %o0
__retl_efault:
retl
mov -EFAULT, %o0
Reference in a new issue View git blame Copy permalink