android_kernel_motorola_sm6225/arch/arm/mach-sa1100/leds-hackkit.c
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00

112 lines
2.2 KiB
C

/*
* linux/arch/arm/mach-sa1100/leds-hackkit.c
*
* based on leds-lart.c
*
* (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
* (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
*
* The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
* as cpu led, the green one is used as timer led.
*/
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#include "leds.h"
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
static unsigned int led_state;
static unsigned int hw_led_state;
#define LED_GREEN GPIO_GPIO23
#define LED_RED GPIO_GPIO22
#define LED_MASK (LED_RED | LED_GREEN)
void hackkit_leds_event(led_event_t evt)
{
unsigned long flags;
local_irq_save(flags);
switch(evt) {
case led_start:
/* pin 22/23 are outputs */
GPDR |= LED_MASK;
hw_led_state = LED_MASK;
led_state = LED_STATE_ENABLED;
break;
case led_stop:
led_state &= ~LED_STATE_ENABLED;
break;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = LED_MASK;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
hw_led_state = LED_MASK;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state ^= LED_GREEN;
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start:
/* The LART people like the LED to be off when the
system is idle... */
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state &= ~LED_RED;
break;
case led_idle_end:
/* ... and on if the system is not idle */
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state |= LED_RED;
break;
#endif
case led_red_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~LED_RED;
break;
case led_red_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= LED_RED;
break;
case led_green_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~LED_GREEN;
break;
case led_green_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= LED_GREEN;
break;
default:
break;
}
/* Now set the GPIO state, or nothing will happen at all */
if (led_state & LED_STATE_ENABLED) {
GPSR = hw_led_state;
GPCR = hw_led_state ^ LED_MASK;
}
local_irq_restore(flags);
}