9ee1ba474f
This patch give the iwlwifi the ability to support A-MSDU up to 8K Please notice - in order to work in 8K A-MSDU ucode support is needed, version 4.44.1.19 (soon to be published). 4K A-MSDU works in current ucode version as well. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
4947 lines
139 KiB
C
4947 lines
139 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2003 - 2007 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* James P. Ketrenos <ipw2100-admin@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/version.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/wireless.h>
|
|
#include <net/mac80211.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include "iwl-4965.h"
|
|
#include "iwl-helpers.h"
|
|
|
|
static void iwl4965_hw_card_show_info(struct iwl4965_priv *priv);
|
|
|
|
#define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np) \
|
|
[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \
|
|
IWL_RATE_SISO_##s##M_PLCP, \
|
|
IWL_RATE_MIMO_##s##M_PLCP, \
|
|
IWL_RATE_##r##M_IEEE, \
|
|
IWL_RATE_##ip##M_INDEX, \
|
|
IWL_RATE_##in##M_INDEX, \
|
|
IWL_RATE_##rp##M_INDEX, \
|
|
IWL_RATE_##rn##M_INDEX, \
|
|
IWL_RATE_##pp##M_INDEX, \
|
|
IWL_RATE_##np##M_INDEX }
|
|
|
|
/*
|
|
* Parameter order:
|
|
* rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
|
|
*
|
|
* If there isn't a valid next or previous rate then INV is used which
|
|
* maps to IWL_RATE_INVALID
|
|
*
|
|
*/
|
|
const struct iwl4965_rate_info iwl4965_rates[IWL_RATE_COUNT] = {
|
|
IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2), /* 1mbps */
|
|
IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5), /* 2mbps */
|
|
IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11), /*5.5mbps */
|
|
IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18), /* 11mbps */
|
|
IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11), /* 6mbps */
|
|
IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11), /* 9mbps */
|
|
IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18), /* 12mbps */
|
|
IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24), /* 18mbps */
|
|
IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36), /* 24mbps */
|
|
IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48), /* 36mbps */
|
|
IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54), /* 48mbps */
|
|
IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
|
|
IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
|
|
};
|
|
|
|
static int is_fat_channel(__le32 rxon_flags)
|
|
{
|
|
return (rxon_flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) ||
|
|
(rxon_flags & RXON_FLG_CHANNEL_MODE_MIXED_MSK);
|
|
}
|
|
|
|
static u8 is_single_stream(struct iwl4965_priv *priv)
|
|
{
|
|
#ifdef CONFIG_IWL4965_HT
|
|
if (!priv->current_ht_config.is_ht ||
|
|
(priv->current_ht_config.supp_mcs_set[1] == 0) ||
|
|
(priv->ps_mode == IWL_MIMO_PS_STATIC))
|
|
return 1;
|
|
#else
|
|
return 1;
|
|
#endif /*CONFIG_IWL4965_HT */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Determine how many receiver/antenna chains to use.
|
|
* More provides better reception via diversity. Fewer saves power.
|
|
* MIMO (dual stream) requires at least 2, but works better with 3.
|
|
* This does not determine *which* chains to use, just how many.
|
|
*/
|
|
static int iwl4965_get_rx_chain_counter(struct iwl4965_priv *priv,
|
|
u8 *idle_state, u8 *rx_state)
|
|
{
|
|
u8 is_single = is_single_stream(priv);
|
|
u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
|
|
|
|
/* # of Rx chains to use when expecting MIMO. */
|
|
if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
|
|
*rx_state = 2;
|
|
else
|
|
*rx_state = 3;
|
|
|
|
/* # Rx chains when idling and maybe trying to save power */
|
|
switch (priv->ps_mode) {
|
|
case IWL_MIMO_PS_STATIC:
|
|
case IWL_MIMO_PS_DYNAMIC:
|
|
*idle_state = (is_cam) ? 2 : 1;
|
|
break;
|
|
case IWL_MIMO_PS_NONE:
|
|
*idle_state = (is_cam) ? *rx_state : 1;
|
|
break;
|
|
default:
|
|
*idle_state = 1;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int iwl4965_hw_rxq_stop(struct iwl4965_priv *priv)
|
|
{
|
|
int rc;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/* stop Rx DMA */
|
|
iwl4965_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
|
|
rc = iwl4965_poll_direct_bit(priv, FH_MEM_RSSR_RX_STATUS_REG,
|
|
(1 << 24), 1000);
|
|
if (rc < 0)
|
|
IWL_ERROR("Can't stop Rx DMA.\n");
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
u8 iwl4965_hw_find_station(struct iwl4965_priv *priv, const u8 *addr)
|
|
{
|
|
int i;
|
|
int start = 0;
|
|
int ret = IWL_INVALID_STATION;
|
|
unsigned long flags;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) ||
|
|
(priv->iw_mode == IEEE80211_IF_TYPE_AP))
|
|
start = IWL_STA_ID;
|
|
|
|
if (is_broadcast_ether_addr(addr))
|
|
return IWL4965_BROADCAST_ID;
|
|
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
for (i = start; i < priv->hw_setting.max_stations; i++)
|
|
if ((priv->stations[i].used) &&
|
|
(!compare_ether_addr
|
|
(priv->stations[i].sta.sta.addr, addr))) {
|
|
ret = i;
|
|
goto out;
|
|
}
|
|
|
|
IWL_DEBUG_ASSOC_LIMIT("can not find STA %s total %d\n",
|
|
print_mac(mac, addr), priv->num_stations);
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int iwl4965_nic_set_pwr_src(struct iwl4965_priv *priv, int pwr_max)
|
|
{
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
ret = iwl4965_grab_nic_access(priv);
|
|
if (ret) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
if (!pwr_max) {
|
|
u32 val;
|
|
|
|
ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE,
|
|
&val);
|
|
|
|
if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT)
|
|
iwl4965_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
|
|
APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
|
|
~APMG_PS_CTRL_MSK_PWR_SRC);
|
|
} else
|
|
iwl4965_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
|
|
APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
|
|
~APMG_PS_CTRL_MSK_PWR_SRC);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int iwl4965_rx_init(struct iwl4965_priv *priv, struct iwl4965_rx_queue *rxq)
|
|
{
|
|
int rc;
|
|
unsigned long flags;
|
|
unsigned int rb_size;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
if (iwl4965_param_amsdu_size_8K)
|
|
rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
|
|
else
|
|
rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
|
|
|
|
/* Stop Rx DMA */
|
|
iwl4965_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
|
|
|
|
/* Reset driver's Rx queue write index */
|
|
iwl4965_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
|
|
|
|
/* Tell device where to find RBD circular buffer in DRAM */
|
|
iwl4965_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
|
|
rxq->dma_addr >> 8);
|
|
|
|
/* Tell device where in DRAM to update its Rx status */
|
|
iwl4965_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
|
|
(priv->hw_setting.shared_phys +
|
|
offsetof(struct iwl4965_shared, val0)) >> 4);
|
|
|
|
/* Enable Rx DMA, enable host interrupt, Rx buffer size 4k, 256 RBDs */
|
|
iwl4965_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
|
|
FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
|
|
FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
|
|
rb_size |
|
|
/*0x10 << 4 | */
|
|
(RX_QUEUE_SIZE_LOG <<
|
|
FH_RCSR_RX_CONFIG_RBDCB_SIZE_BITSHIFT));
|
|
|
|
/*
|
|
* iwl4965_write32(priv,CSR_INT_COAL_REG,0);
|
|
*/
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Tell 4965 where to find the "keep warm" buffer */
|
|
static int iwl4965_kw_init(struct iwl4965_priv *priv)
|
|
{
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc)
|
|
goto out;
|
|
|
|
iwl4965_write_direct32(priv, IWL_FH_KW_MEM_ADDR_REG,
|
|
priv->kw.dma_addr >> 4);
|
|
iwl4965_release_nic_access(priv);
|
|
out:
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
static int iwl4965_kw_alloc(struct iwl4965_priv *priv)
|
|
{
|
|
struct pci_dev *dev = priv->pci_dev;
|
|
struct iwl4965_kw *kw = &priv->kw;
|
|
|
|
kw->size = IWL4965_KW_SIZE; /* TBW need set somewhere else */
|
|
kw->v_addr = pci_alloc_consistent(dev, kw->size, &kw->dma_addr);
|
|
if (!kw->v_addr)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \
|
|
? # x " " : "")
|
|
|
|
/**
|
|
* iwl4965_set_fat_chan_info - Copy fat channel info into driver's priv.
|
|
*
|
|
* Does not set up a command, or touch hardware.
|
|
*/
|
|
int iwl4965_set_fat_chan_info(struct iwl4965_priv *priv, int phymode, u16 channel,
|
|
const struct iwl4965_eeprom_channel *eeprom_ch,
|
|
u8 fat_extension_channel)
|
|
{
|
|
struct iwl4965_channel_info *ch_info;
|
|
|
|
ch_info = (struct iwl4965_channel_info *)
|
|
iwl4965_get_channel_info(priv, phymode, channel);
|
|
|
|
if (!is_channel_valid(ch_info))
|
|
return -1;
|
|
|
|
IWL_DEBUG_INFO("FAT Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x"
|
|
" %ddBm): Ad-Hoc %ssupported\n",
|
|
ch_info->channel,
|
|
is_channel_a_band(ch_info) ?
|
|
"5.2" : "2.4",
|
|
CHECK_AND_PRINT(IBSS),
|
|
CHECK_AND_PRINT(ACTIVE),
|
|
CHECK_AND_PRINT(RADAR),
|
|
CHECK_AND_PRINT(WIDE),
|
|
CHECK_AND_PRINT(NARROW),
|
|
CHECK_AND_PRINT(DFS),
|
|
eeprom_ch->flags,
|
|
eeprom_ch->max_power_avg,
|
|
((eeprom_ch->flags & EEPROM_CHANNEL_IBSS)
|
|
&& !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ?
|
|
"" : "not ");
|
|
|
|
ch_info->fat_eeprom = *eeprom_ch;
|
|
ch_info->fat_max_power_avg = eeprom_ch->max_power_avg;
|
|
ch_info->fat_curr_txpow = eeprom_ch->max_power_avg;
|
|
ch_info->fat_min_power = 0;
|
|
ch_info->fat_scan_power = eeprom_ch->max_power_avg;
|
|
ch_info->fat_flags = eeprom_ch->flags;
|
|
ch_info->fat_extension_channel = fat_extension_channel;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_kw_free - Free the "keep warm" buffer
|
|
*/
|
|
static void iwl4965_kw_free(struct iwl4965_priv *priv)
|
|
{
|
|
struct pci_dev *dev = priv->pci_dev;
|
|
struct iwl4965_kw *kw = &priv->kw;
|
|
|
|
if (kw->v_addr) {
|
|
pci_free_consistent(dev, kw->size, kw->v_addr, kw->dma_addr);
|
|
memset(kw, 0, sizeof(*kw));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* iwl4965_txq_ctx_reset - Reset TX queue context
|
|
* Destroys all DMA structures and initialise them again
|
|
*
|
|
* @param priv
|
|
* @return error code
|
|
*/
|
|
static int iwl4965_txq_ctx_reset(struct iwl4965_priv *priv)
|
|
{
|
|
int rc = 0;
|
|
int txq_id, slots_num;
|
|
unsigned long flags;
|
|
|
|
iwl4965_kw_free(priv);
|
|
|
|
/* Free all tx/cmd queues and keep-warm buffer */
|
|
iwl4965_hw_txq_ctx_free(priv);
|
|
|
|
/* Alloc keep-warm buffer */
|
|
rc = iwl4965_kw_alloc(priv);
|
|
if (rc) {
|
|
IWL_ERROR("Keep Warm allocation failed");
|
|
goto error_kw;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (unlikely(rc)) {
|
|
IWL_ERROR("TX reset failed");
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
goto error_reset;
|
|
}
|
|
|
|
/* Turn off all Tx DMA channels */
|
|
iwl4965_write_prph(priv, KDR_SCD_TXFACT, 0);
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
/* Tell 4965 where to find the keep-warm buffer */
|
|
rc = iwl4965_kw_init(priv);
|
|
if (rc) {
|
|
IWL_ERROR("kw_init failed\n");
|
|
goto error_reset;
|
|
}
|
|
|
|
/* Alloc and init all (default 16) Tx queues,
|
|
* including the command queue (#4) */
|
|
for (txq_id = 0; txq_id < priv->hw_setting.max_txq_num; txq_id++) {
|
|
slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
|
|
TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
|
|
rc = iwl4965_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
|
|
txq_id);
|
|
if (rc) {
|
|
IWL_ERROR("Tx %d queue init failed\n", txq_id);
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
|
|
error:
|
|
iwl4965_hw_txq_ctx_free(priv);
|
|
error_reset:
|
|
iwl4965_kw_free(priv);
|
|
error_kw:
|
|
return rc;
|
|
}
|
|
|
|
int iwl4965_hw_nic_init(struct iwl4965_priv *priv)
|
|
{
|
|
int rc;
|
|
unsigned long flags;
|
|
struct iwl4965_rx_queue *rxq = &priv->rxq;
|
|
u8 rev_id;
|
|
u32 val;
|
|
u8 val_link;
|
|
|
|
iwl4965_power_init_handle(priv);
|
|
|
|
/* nic_init */
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
iwl4965_set_bit(priv, CSR_GIO_CHICKEN_BITS,
|
|
CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
|
|
|
|
iwl4965_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
|
|
rc = iwl4965_poll_bit(priv, CSR_GP_CNTRL,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
|
|
if (rc < 0) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
IWL_DEBUG_INFO("Failed to init the card\n");
|
|
return rc;
|
|
}
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
iwl4965_read_prph(priv, APMG_CLK_CTRL_REG);
|
|
|
|
iwl4965_write_prph(priv, APMG_CLK_CTRL_REG,
|
|
APMG_CLK_VAL_DMA_CLK_RQT |
|
|
APMG_CLK_VAL_BSM_CLK_RQT);
|
|
iwl4965_read_prph(priv, APMG_CLK_CTRL_REG);
|
|
|
|
udelay(20);
|
|
|
|
iwl4965_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
|
|
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
iwl4965_write32(priv, CSR_INT_COALESCING, 512 / 32);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
/* Determine HW type */
|
|
rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
|
|
if (rc)
|
|
return rc;
|
|
|
|
IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id);
|
|
|
|
iwl4965_nic_set_pwr_src(priv, 1);
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
if ((rev_id & 0x80) == 0x80 && (rev_id & 0x7f) < 8) {
|
|
pci_read_config_dword(priv->pci_dev, PCI_REG_WUM8, &val);
|
|
/* Enable No Snoop field */
|
|
pci_write_config_dword(priv->pci_dev, PCI_REG_WUM8,
|
|
val & ~(1 << 11));
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
/* Read the EEPROM */
|
|
rc = iwl4965_eeprom_init(priv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (priv->eeprom.calib_version < EEPROM_TX_POWER_VERSION_NEW) {
|
|
IWL_ERROR("Older EEPROM detected! Aborting.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
|
|
|
|
/* disable L1 entry -- workaround for pre-B1 */
|
|
pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
/* set CSR_HW_CONFIG_REG for uCode use */
|
|
|
|
iwl4965_set_bit(priv, CSR_SW_VER, CSR_HW_IF_CONFIG_REG_BIT_KEDRON_R |
|
|
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
|
|
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc < 0) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
IWL_DEBUG_INFO("Failed to init the card\n");
|
|
return rc;
|
|
}
|
|
|
|
iwl4965_read_prph(priv, APMG_PS_CTRL_REG);
|
|
iwl4965_set_bits_prph(priv, APMG_PS_CTRL_REG,
|
|
APMG_PS_CTRL_VAL_RESET_REQ);
|
|
udelay(5);
|
|
iwl4965_clear_bits_prph(priv, APMG_PS_CTRL_REG,
|
|
APMG_PS_CTRL_VAL_RESET_REQ);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
iwl4965_hw_card_show_info(priv);
|
|
|
|
/* end nic_init */
|
|
|
|
/* Allocate the RX queue, or reset if it is already allocated */
|
|
if (!rxq->bd) {
|
|
rc = iwl4965_rx_queue_alloc(priv);
|
|
if (rc) {
|
|
IWL_ERROR("Unable to initialize Rx queue\n");
|
|
return -ENOMEM;
|
|
}
|
|
} else
|
|
iwl4965_rx_queue_reset(priv, rxq);
|
|
|
|
iwl4965_rx_replenish(priv);
|
|
|
|
iwl4965_rx_init(priv, rxq);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
rxq->need_update = 1;
|
|
iwl4965_rx_queue_update_write_ptr(priv, rxq);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
/* Allocate and init all Tx and Command queues */
|
|
rc = iwl4965_txq_ctx_reset(priv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
|
|
IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n");
|
|
|
|
if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
|
|
IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n");
|
|
|
|
set_bit(STATUS_INIT, &priv->status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int iwl4965_hw_nic_stop_master(struct iwl4965_priv *priv)
|
|
{
|
|
int rc = 0;
|
|
u32 reg_val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
/* set stop master bit */
|
|
iwl4965_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
|
|
|
|
reg_val = iwl4965_read32(priv, CSR_GP_CNTRL);
|
|
|
|
if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE ==
|
|
(reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE))
|
|
IWL_DEBUG_INFO("Card in power save, master is already "
|
|
"stopped\n");
|
|
else {
|
|
rc = iwl4965_poll_bit(priv, CSR_RESET,
|
|
CSR_RESET_REG_FLAG_MASTER_DISABLED,
|
|
CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
|
|
if (rc < 0) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
IWL_DEBUG_INFO("stop master\n");
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_hw_txq_ctx_stop - Stop all Tx DMA channels, free Tx queue memory
|
|
*/
|
|
void iwl4965_hw_txq_ctx_stop(struct iwl4965_priv *priv)
|
|
{
|
|
|
|
int txq_id;
|
|
unsigned long flags;
|
|
|
|
/* Stop each Tx DMA channel, and wait for it to be idle */
|
|
for (txq_id = 0; txq_id < priv->hw_setting.max_txq_num; txq_id++) {
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (iwl4965_grab_nic_access(priv)) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
continue;
|
|
}
|
|
|
|
iwl4965_write_direct32(priv,
|
|
IWL_FH_TCSR_CHNL_TX_CONFIG_REG(txq_id),
|
|
0x0);
|
|
iwl4965_poll_direct_bit(priv, IWL_FH_TSSR_TX_STATUS_REG,
|
|
IWL_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE
|
|
(txq_id), 200);
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
}
|
|
|
|
/* Deallocate memory for all Tx queues */
|
|
iwl4965_hw_txq_ctx_free(priv);
|
|
}
|
|
|
|
int iwl4965_hw_nic_reset(struct iwl4965_priv *priv)
|
|
{
|
|
int rc = 0;
|
|
unsigned long flags;
|
|
|
|
iwl4965_hw_nic_stop_master(priv);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
iwl4965_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
|
|
|
|
udelay(10);
|
|
|
|
iwl4965_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
|
|
rc = iwl4965_poll_bit(priv, CSR_RESET,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
|
|
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25);
|
|
|
|
udelay(10);
|
|
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (!rc) {
|
|
iwl4965_write_prph(priv, APMG_CLK_EN_REG,
|
|
APMG_CLK_VAL_DMA_CLK_RQT |
|
|
APMG_CLK_VAL_BSM_CLK_RQT);
|
|
|
|
udelay(10);
|
|
|
|
iwl4965_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
|
|
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
}
|
|
|
|
clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
|
|
wake_up_interruptible(&priv->wait_command_queue);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
#define REG_RECALIB_PERIOD (60)
|
|
|
|
/**
|
|
* iwl4965_bg_statistics_periodic - Timer callback to queue statistics
|
|
*
|
|
* This callback is provided in order to queue the statistics_work
|
|
* in work_queue context (v. softirq)
|
|
*
|
|
* This timer function is continually reset to execute within
|
|
* REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
|
|
* was received. We need to ensure we receive the statistics in order
|
|
* to update the temperature used for calibrating the TXPOWER. However,
|
|
* we can't send the statistics command from softirq context (which
|
|
* is the context which timers run at) so we have to queue off the
|
|
* statistics_work to actually send the command to the hardware.
|
|
*/
|
|
static void iwl4965_bg_statistics_periodic(unsigned long data)
|
|
{
|
|
struct iwl4965_priv *priv = (struct iwl4965_priv *)data;
|
|
|
|
queue_work(priv->workqueue, &priv->statistics_work);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_bg_statistics_work - Send the statistics request to the hardware.
|
|
*
|
|
* This is queued by iwl4965_bg_statistics_periodic.
|
|
*/
|
|
static void iwl4965_bg_statistics_work(struct work_struct *work)
|
|
{
|
|
struct iwl4965_priv *priv = container_of(work, struct iwl4965_priv,
|
|
statistics_work);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
iwl4965_send_statistics_request(priv);
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
#define CT_LIMIT_CONST 259
|
|
#define TM_CT_KILL_THRESHOLD 110
|
|
|
|
void iwl4965_rf_kill_ct_config(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_ct_kill_config cmd;
|
|
u32 R1, R2, R3;
|
|
u32 temp_th;
|
|
u32 crit_temperature;
|
|
unsigned long flags;
|
|
int rc = 0;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR,
|
|
CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
if (priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK) {
|
|
R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
|
|
R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
|
|
R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
|
|
} else {
|
|
R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
|
|
R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
|
|
R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
|
|
}
|
|
|
|
temp_th = CELSIUS_TO_KELVIN(TM_CT_KILL_THRESHOLD);
|
|
|
|
crit_temperature = ((temp_th * (R3-R1))/CT_LIMIT_CONST) + R2;
|
|
cmd.critical_temperature_R = cpu_to_le32(crit_temperature);
|
|
rc = iwl4965_send_cmd_pdu(priv,
|
|
REPLY_CT_KILL_CONFIG_CMD, sizeof(cmd), &cmd);
|
|
if (rc)
|
|
IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n");
|
|
else
|
|
IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded\n");
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_SENSITIVITY
|
|
|
|
/* "false alarms" are signals that our DSP tries to lock onto,
|
|
* but then determines that they are either noise, or transmissions
|
|
* from a distant wireless network (also "noise", really) that get
|
|
* "stepped on" by stronger transmissions within our own network.
|
|
* This algorithm attempts to set a sensitivity level that is high
|
|
* enough to receive all of our own network traffic, but not so
|
|
* high that our DSP gets too busy trying to lock onto non-network
|
|
* activity/noise. */
|
|
static int iwl4965_sens_energy_cck(struct iwl4965_priv *priv,
|
|
u32 norm_fa,
|
|
u32 rx_enable_time,
|
|
struct statistics_general_data *rx_info)
|
|
{
|
|
u32 max_nrg_cck = 0;
|
|
int i = 0;
|
|
u8 max_silence_rssi = 0;
|
|
u32 silence_ref = 0;
|
|
u8 silence_rssi_a = 0;
|
|
u8 silence_rssi_b = 0;
|
|
u8 silence_rssi_c = 0;
|
|
u32 val;
|
|
|
|
/* "false_alarms" values below are cross-multiplications to assess the
|
|
* numbers of false alarms within the measured period of actual Rx
|
|
* (Rx is off when we're txing), vs the min/max expected false alarms
|
|
* (some should be expected if rx is sensitive enough) in a
|
|
* hypothetical listening period of 200 time units (TU), 204.8 msec:
|
|
*
|
|
* MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time
|
|
*
|
|
* */
|
|
u32 false_alarms = norm_fa * 200 * 1024;
|
|
u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
|
|
u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
|
|
struct iwl4965_sensitivity_data *data = NULL;
|
|
|
|
data = &(priv->sensitivity_data);
|
|
|
|
data->nrg_auto_corr_silence_diff = 0;
|
|
|
|
/* Find max silence rssi among all 3 receivers.
|
|
* This is background noise, which may include transmissions from other
|
|
* networks, measured during silence before our network's beacon */
|
|
silence_rssi_a = (u8)((rx_info->beacon_silence_rssi_a &
|
|
ALL_BAND_FILTER)>>8);
|
|
silence_rssi_b = (u8)((rx_info->beacon_silence_rssi_b &
|
|
ALL_BAND_FILTER)>>8);
|
|
silence_rssi_c = (u8)((rx_info->beacon_silence_rssi_c &
|
|
ALL_BAND_FILTER)>>8);
|
|
|
|
val = max(silence_rssi_b, silence_rssi_c);
|
|
max_silence_rssi = max(silence_rssi_a, (u8) val);
|
|
|
|
/* Store silence rssi in 20-beacon history table */
|
|
data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi;
|
|
data->nrg_silence_idx++;
|
|
if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L)
|
|
data->nrg_silence_idx = 0;
|
|
|
|
/* Find max silence rssi across 20 beacon history */
|
|
for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) {
|
|
val = data->nrg_silence_rssi[i];
|
|
silence_ref = max(silence_ref, val);
|
|
}
|
|
IWL_DEBUG_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n",
|
|
silence_rssi_a, silence_rssi_b, silence_rssi_c,
|
|
silence_ref);
|
|
|
|
/* Find max rx energy (min value!) among all 3 receivers,
|
|
* measured during beacon frame.
|
|
* Save it in 10-beacon history table. */
|
|
i = data->nrg_energy_idx;
|
|
val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c);
|
|
data->nrg_value[i] = min(rx_info->beacon_energy_a, val);
|
|
|
|
data->nrg_energy_idx++;
|
|
if (data->nrg_energy_idx >= 10)
|
|
data->nrg_energy_idx = 0;
|
|
|
|
/* Find min rx energy (max value) across 10 beacon history.
|
|
* This is the minimum signal level that we want to receive well.
|
|
* Add backoff (margin so we don't miss slightly lower energy frames).
|
|
* This establishes an upper bound (min value) for energy threshold. */
|
|
max_nrg_cck = data->nrg_value[0];
|
|
for (i = 1; i < 10; i++)
|
|
max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
|
|
max_nrg_cck += 6;
|
|
|
|
IWL_DEBUG_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
|
|
rx_info->beacon_energy_a, rx_info->beacon_energy_b,
|
|
rx_info->beacon_energy_c, max_nrg_cck - 6);
|
|
|
|
/* Count number of consecutive beacons with fewer-than-desired
|
|
* false alarms. */
|
|
if (false_alarms < min_false_alarms)
|
|
data->num_in_cck_no_fa++;
|
|
else
|
|
data->num_in_cck_no_fa = 0;
|
|
IWL_DEBUG_CALIB("consecutive bcns with few false alarms = %u\n",
|
|
data->num_in_cck_no_fa);
|
|
|
|
/* If we got too many false alarms this time, reduce sensitivity */
|
|
if (false_alarms > max_false_alarms) {
|
|
IWL_DEBUG_CALIB("norm FA %u > max FA %u\n",
|
|
false_alarms, max_false_alarms);
|
|
IWL_DEBUG_CALIB("... reducing sensitivity\n");
|
|
data->nrg_curr_state = IWL_FA_TOO_MANY;
|
|
|
|
if (data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK) {
|
|
/* Store for "fewer than desired" on later beacon */
|
|
data->nrg_silence_ref = silence_ref;
|
|
|
|
/* increase energy threshold (reduce nrg value)
|
|
* to decrease sensitivity */
|
|
if (data->nrg_th_cck > (NRG_MAX_CCK + NRG_STEP_CCK))
|
|
data->nrg_th_cck = data->nrg_th_cck
|
|
- NRG_STEP_CCK;
|
|
}
|
|
|
|
/* increase auto_corr values to decrease sensitivity */
|
|
if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK)
|
|
data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1;
|
|
else {
|
|
val = data->auto_corr_cck + AUTO_CORR_STEP_CCK;
|
|
data->auto_corr_cck = min((u32)AUTO_CORR_MAX_CCK, val);
|
|
}
|
|
val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
|
|
data->auto_corr_cck_mrc = min((u32)AUTO_CORR_MAX_CCK_MRC, val);
|
|
|
|
/* Else if we got fewer than desired, increase sensitivity */
|
|
} else if (false_alarms < min_false_alarms) {
|
|
data->nrg_curr_state = IWL_FA_TOO_FEW;
|
|
|
|
/* Compare silence level with silence level for most recent
|
|
* healthy number or too many false alarms */
|
|
data->nrg_auto_corr_silence_diff = (s32)data->nrg_silence_ref -
|
|
(s32)silence_ref;
|
|
|
|
IWL_DEBUG_CALIB("norm FA %u < min FA %u, silence diff %d\n",
|
|
false_alarms, min_false_alarms,
|
|
data->nrg_auto_corr_silence_diff);
|
|
|
|
/* Increase value to increase sensitivity, but only if:
|
|
* 1a) previous beacon did *not* have *too many* false alarms
|
|
* 1b) AND there's a significant difference in Rx levels
|
|
* from a previous beacon with too many, or healthy # FAs
|
|
* OR 2) We've seen a lot of beacons (100) with too few
|
|
* false alarms */
|
|
if ((data->nrg_prev_state != IWL_FA_TOO_MANY) &&
|
|
((data->nrg_auto_corr_silence_diff > NRG_DIFF) ||
|
|
(data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA))) {
|
|
|
|
IWL_DEBUG_CALIB("... increasing sensitivity\n");
|
|
/* Increase nrg value to increase sensitivity */
|
|
val = data->nrg_th_cck + NRG_STEP_CCK;
|
|
data->nrg_th_cck = min((u32)NRG_MIN_CCK, val);
|
|
|
|
/* Decrease auto_corr values to increase sensitivity */
|
|
val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
|
|
data->auto_corr_cck = max((u32)AUTO_CORR_MIN_CCK, val);
|
|
|
|
val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK;
|
|
data->auto_corr_cck_mrc =
|
|
max((u32)AUTO_CORR_MIN_CCK_MRC, val);
|
|
|
|
} else
|
|
IWL_DEBUG_CALIB("... but not changing sensitivity\n");
|
|
|
|
/* Else we got a healthy number of false alarms, keep status quo */
|
|
} else {
|
|
IWL_DEBUG_CALIB(" FA in safe zone\n");
|
|
data->nrg_curr_state = IWL_FA_GOOD_RANGE;
|
|
|
|
/* Store for use in "fewer than desired" with later beacon */
|
|
data->nrg_silence_ref = silence_ref;
|
|
|
|
/* If previous beacon had too many false alarms,
|
|
* give it some extra margin by reducing sensitivity again
|
|
* (but don't go below measured energy of desired Rx) */
|
|
if (IWL_FA_TOO_MANY == data->nrg_prev_state) {
|
|
IWL_DEBUG_CALIB("... increasing margin\n");
|
|
data->nrg_th_cck -= NRG_MARGIN;
|
|
}
|
|
}
|
|
|
|
/* Make sure the energy threshold does not go above the measured
|
|
* energy of the desired Rx signals (reduced by backoff margin),
|
|
* or else we might start missing Rx frames.
|
|
* Lower value is higher energy, so we use max()!
|
|
*/
|
|
data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
|
|
IWL_DEBUG_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck);
|
|
|
|
data->nrg_prev_state = data->nrg_curr_state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int iwl4965_sens_auto_corr_ofdm(struct iwl4965_priv *priv,
|
|
u32 norm_fa,
|
|
u32 rx_enable_time)
|
|
{
|
|
u32 val;
|
|
u32 false_alarms = norm_fa * 200 * 1024;
|
|
u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
|
|
u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
|
|
struct iwl4965_sensitivity_data *data = NULL;
|
|
|
|
data = &(priv->sensitivity_data);
|
|
|
|
/* If we got too many false alarms this time, reduce sensitivity */
|
|
if (false_alarms > max_false_alarms) {
|
|
|
|
IWL_DEBUG_CALIB("norm FA %u > max FA %u)\n",
|
|
false_alarms, max_false_alarms);
|
|
|
|
val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
|
|
data->auto_corr_ofdm =
|
|
min((u32)AUTO_CORR_MAX_OFDM, val);
|
|
|
|
val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM;
|
|
data->auto_corr_ofdm_mrc =
|
|
min((u32)AUTO_CORR_MAX_OFDM_MRC, val);
|
|
|
|
val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM;
|
|
data->auto_corr_ofdm_x1 =
|
|
min((u32)AUTO_CORR_MAX_OFDM_X1, val);
|
|
|
|
val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM;
|
|
data->auto_corr_ofdm_mrc_x1 =
|
|
min((u32)AUTO_CORR_MAX_OFDM_MRC_X1, val);
|
|
}
|
|
|
|
/* Else if we got fewer than desired, increase sensitivity */
|
|
else if (false_alarms < min_false_alarms) {
|
|
|
|
IWL_DEBUG_CALIB("norm FA %u < min FA %u\n",
|
|
false_alarms, min_false_alarms);
|
|
|
|
val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
|
|
data->auto_corr_ofdm =
|
|
max((u32)AUTO_CORR_MIN_OFDM, val);
|
|
|
|
val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM;
|
|
data->auto_corr_ofdm_mrc =
|
|
max((u32)AUTO_CORR_MIN_OFDM_MRC, val);
|
|
|
|
val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM;
|
|
data->auto_corr_ofdm_x1 =
|
|
max((u32)AUTO_CORR_MIN_OFDM_X1, val);
|
|
|
|
val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM;
|
|
data->auto_corr_ofdm_mrc_x1 =
|
|
max((u32)AUTO_CORR_MIN_OFDM_MRC_X1, val);
|
|
}
|
|
|
|
else
|
|
IWL_DEBUG_CALIB("min FA %u < norm FA %u < max FA %u OK\n",
|
|
min_false_alarms, false_alarms, max_false_alarms);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iwl4965_sensitivity_callback(struct iwl4965_priv *priv,
|
|
struct iwl4965_cmd *cmd, struct sk_buff *skb)
|
|
{
|
|
/* We didn't cache the SKB; let the caller free it */
|
|
return 1;
|
|
}
|
|
|
|
/* Prepare a SENSITIVITY_CMD, send to uCode if values have changed */
|
|
static int iwl4965_sensitivity_write(struct iwl4965_priv *priv, u8 flags)
|
|
{
|
|
int rc = 0;
|
|
struct iwl4965_sensitivity_cmd cmd ;
|
|
struct iwl4965_sensitivity_data *data = NULL;
|
|
struct iwl4965_host_cmd cmd_out = {
|
|
.id = SENSITIVITY_CMD,
|
|
.len = sizeof(struct iwl4965_sensitivity_cmd),
|
|
.meta.flags = flags,
|
|
.data = &cmd,
|
|
};
|
|
|
|
data = &(priv->sensitivity_data);
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
|
|
cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_INDEX] =
|
|
cpu_to_le16((u16)data->auto_corr_ofdm);
|
|
cmd.table[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_INDEX] =
|
|
cpu_to_le16((u16)data->auto_corr_ofdm_mrc);
|
|
cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_INDEX] =
|
|
cpu_to_le16((u16)data->auto_corr_ofdm_x1);
|
|
cmd.table[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_INDEX] =
|
|
cpu_to_le16((u16)data->auto_corr_ofdm_mrc_x1);
|
|
|
|
cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX] =
|
|
cpu_to_le16((u16)data->auto_corr_cck);
|
|
cmd.table[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_INDEX] =
|
|
cpu_to_le16((u16)data->auto_corr_cck_mrc);
|
|
|
|
cmd.table[HD_MIN_ENERGY_CCK_DET_INDEX] =
|
|
cpu_to_le16((u16)data->nrg_th_cck);
|
|
cmd.table[HD_MIN_ENERGY_OFDM_DET_INDEX] =
|
|
cpu_to_le16((u16)data->nrg_th_ofdm);
|
|
|
|
cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
|
|
__constant_cpu_to_le16(190);
|
|
cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
|
|
__constant_cpu_to_le16(390);
|
|
cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] =
|
|
__constant_cpu_to_le16(62);
|
|
|
|
IWL_DEBUG_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
|
|
data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
|
|
data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
|
|
data->nrg_th_ofdm);
|
|
|
|
IWL_DEBUG_CALIB("cck: ac %u mrc %u thresh %u\n",
|
|
data->auto_corr_cck, data->auto_corr_cck_mrc,
|
|
data->nrg_th_cck);
|
|
|
|
/* Update uCode's "work" table, and copy it to DSP */
|
|
cmd.control = SENSITIVITY_CMD_CONTROL_WORK_TABLE;
|
|
|
|
if (flags & CMD_ASYNC)
|
|
cmd_out.meta.u.callback = iwl4965_sensitivity_callback;
|
|
|
|
/* Don't send command to uCode if nothing has changed */
|
|
if (!memcmp(&cmd.table[0], &(priv->sensitivity_tbl[0]),
|
|
sizeof(u16)*HD_TABLE_SIZE)) {
|
|
IWL_DEBUG_CALIB("No change in SENSITIVITY_CMD\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Copy table for comparison next time */
|
|
memcpy(&(priv->sensitivity_tbl[0]), &(cmd.table[0]),
|
|
sizeof(u16)*HD_TABLE_SIZE);
|
|
|
|
rc = iwl4965_send_cmd(priv, &cmd_out);
|
|
if (!rc) {
|
|
IWL_DEBUG_CALIB("SENSITIVITY_CMD succeeded\n");
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void iwl4965_init_sensitivity(struct iwl4965_priv *priv, u8 flags, u8 force)
|
|
{
|
|
int rc = 0;
|
|
int i;
|
|
struct iwl4965_sensitivity_data *data = NULL;
|
|
|
|
IWL_DEBUG_CALIB("Start iwl4965_init_sensitivity\n");
|
|
|
|
if (force)
|
|
memset(&(priv->sensitivity_tbl[0]), 0,
|
|
sizeof(u16)*HD_TABLE_SIZE);
|
|
|
|
/* Clear driver's sensitivity algo data */
|
|
data = &(priv->sensitivity_data);
|
|
memset(data, 0, sizeof(struct iwl4965_sensitivity_data));
|
|
|
|
data->num_in_cck_no_fa = 0;
|
|
data->nrg_curr_state = IWL_FA_TOO_MANY;
|
|
data->nrg_prev_state = IWL_FA_TOO_MANY;
|
|
data->nrg_silence_ref = 0;
|
|
data->nrg_silence_idx = 0;
|
|
data->nrg_energy_idx = 0;
|
|
|
|
for (i = 0; i < 10; i++)
|
|
data->nrg_value[i] = 0;
|
|
|
|
for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
|
|
data->nrg_silence_rssi[i] = 0;
|
|
|
|
data->auto_corr_ofdm = 90;
|
|
data->auto_corr_ofdm_mrc = 170;
|
|
data->auto_corr_ofdm_x1 = 105;
|
|
data->auto_corr_ofdm_mrc_x1 = 220;
|
|
data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF;
|
|
data->auto_corr_cck_mrc = 200;
|
|
data->nrg_th_cck = 100;
|
|
data->nrg_th_ofdm = 100;
|
|
|
|
data->last_bad_plcp_cnt_ofdm = 0;
|
|
data->last_fa_cnt_ofdm = 0;
|
|
data->last_bad_plcp_cnt_cck = 0;
|
|
data->last_fa_cnt_cck = 0;
|
|
|
|
/* Clear prior Sensitivity command data to force send to uCode */
|
|
if (force)
|
|
memset(&(priv->sensitivity_tbl[0]), 0,
|
|
sizeof(u16)*HD_TABLE_SIZE);
|
|
|
|
rc |= iwl4965_sensitivity_write(priv, flags);
|
|
IWL_DEBUG_CALIB("<<return 0x%X\n", rc);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
|
|
* Called after every association, but this runs only once!
|
|
* ... once chain noise is calibrated the first time, it's good forever. */
|
|
void iwl4965_chain_noise_reset(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_chain_noise_data *data = NULL;
|
|
int rc = 0;
|
|
|
|
data = &(priv->chain_noise_data);
|
|
if ((data->state == IWL_CHAIN_NOISE_ALIVE) && iwl4965_is_associated(priv)) {
|
|
struct iwl4965_calibration_cmd cmd;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
|
|
cmd.diff_gain_a = 0;
|
|
cmd.diff_gain_b = 0;
|
|
cmd.diff_gain_c = 0;
|
|
rc = iwl4965_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
|
|
sizeof(cmd), &cmd);
|
|
msleep(4);
|
|
data->state = IWL_CHAIN_NOISE_ACCUMULATE;
|
|
IWL_DEBUG_CALIB("Run chain_noise_calibrate\n");
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Accumulate 20 beacons of signal and noise statistics for each of
|
|
* 3 receivers/antennas/rx-chains, then figure out:
|
|
* 1) Which antennas are connected.
|
|
* 2) Differential rx gain settings to balance the 3 receivers.
|
|
*/
|
|
static void iwl4965_noise_calibration(struct iwl4965_priv *priv,
|
|
struct iwl4965_notif_statistics *stat_resp)
|
|
{
|
|
struct iwl4965_chain_noise_data *data = NULL;
|
|
int rc = 0;
|
|
|
|
u32 chain_noise_a;
|
|
u32 chain_noise_b;
|
|
u32 chain_noise_c;
|
|
u32 chain_sig_a;
|
|
u32 chain_sig_b;
|
|
u32 chain_sig_c;
|
|
u32 average_sig[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
|
|
u32 average_noise[NUM_RX_CHAINS] = {INITIALIZATION_VALUE};
|
|
u32 max_average_sig;
|
|
u16 max_average_sig_antenna_i;
|
|
u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
|
|
u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
|
|
u16 i = 0;
|
|
u16 chan_num = INITIALIZATION_VALUE;
|
|
u32 band = INITIALIZATION_VALUE;
|
|
u32 active_chains = 0;
|
|
unsigned long flags;
|
|
struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general);
|
|
|
|
data = &(priv->chain_noise_data);
|
|
|
|
/* Accumulate just the first 20 beacons after the first association,
|
|
* then we're done forever. */
|
|
if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
|
|
if (data->state == IWL_CHAIN_NOISE_ALIVE)
|
|
IWL_DEBUG_CALIB("Wait for noise calib reset\n");
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
|
|
IWL_DEBUG_CALIB(" << Interference data unavailable\n");
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return;
|
|
}
|
|
|
|
band = (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) ? 0 : 1;
|
|
chan_num = le16_to_cpu(priv->staging_rxon.channel);
|
|
|
|
/* Make sure we accumulate data for just the associated channel
|
|
* (even if scanning). */
|
|
if ((chan_num != (le32_to_cpu(stat_resp->flag) >> 16)) ||
|
|
((STATISTICS_REPLY_FLG_BAND_24G_MSK ==
|
|
(stat_resp->flag & STATISTICS_REPLY_FLG_BAND_24G_MSK)) && band)) {
|
|
IWL_DEBUG_CALIB("Stats not from chan=%d, band=%d\n",
|
|
chan_num, band);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Accumulate beacon statistics values across 20 beacons */
|
|
chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
|
|
IN_BAND_FILTER;
|
|
chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
|
|
IN_BAND_FILTER;
|
|
chain_noise_c = le32_to_cpu(rx_info->beacon_silence_rssi_c) &
|
|
IN_BAND_FILTER;
|
|
|
|
chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER;
|
|
chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER;
|
|
chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER;
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
data->beacon_count++;
|
|
|
|
data->chain_noise_a = (chain_noise_a + data->chain_noise_a);
|
|
data->chain_noise_b = (chain_noise_b + data->chain_noise_b);
|
|
data->chain_noise_c = (chain_noise_c + data->chain_noise_c);
|
|
|
|
data->chain_signal_a = (chain_sig_a + data->chain_signal_a);
|
|
data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
|
|
data->chain_signal_c = (chain_sig_c + data->chain_signal_c);
|
|
|
|
IWL_DEBUG_CALIB("chan=%d, band=%d, beacon=%d\n", chan_num, band,
|
|
data->beacon_count);
|
|
IWL_DEBUG_CALIB("chain_sig: a %d b %d c %d\n",
|
|
chain_sig_a, chain_sig_b, chain_sig_c);
|
|
IWL_DEBUG_CALIB("chain_noise: a %d b %d c %d\n",
|
|
chain_noise_a, chain_noise_b, chain_noise_c);
|
|
|
|
/* If this is the 20th beacon, determine:
|
|
* 1) Disconnected antennas (using signal strengths)
|
|
* 2) Differential gain (using silence noise) to balance receivers */
|
|
if (data->beacon_count == CAL_NUM_OF_BEACONS) {
|
|
|
|
/* Analyze signal for disconnected antenna */
|
|
average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS;
|
|
average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS;
|
|
average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS;
|
|
|
|
if (average_sig[0] >= average_sig[1]) {
|
|
max_average_sig = average_sig[0];
|
|
max_average_sig_antenna_i = 0;
|
|
active_chains = (1 << max_average_sig_antenna_i);
|
|
} else {
|
|
max_average_sig = average_sig[1];
|
|
max_average_sig_antenna_i = 1;
|
|
active_chains = (1 << max_average_sig_antenna_i);
|
|
}
|
|
|
|
if (average_sig[2] >= max_average_sig) {
|
|
max_average_sig = average_sig[2];
|
|
max_average_sig_antenna_i = 2;
|
|
active_chains = (1 << max_average_sig_antenna_i);
|
|
}
|
|
|
|
IWL_DEBUG_CALIB("average_sig: a %d b %d c %d\n",
|
|
average_sig[0], average_sig[1], average_sig[2]);
|
|
IWL_DEBUG_CALIB("max_average_sig = %d, antenna %d\n",
|
|
max_average_sig, max_average_sig_antenna_i);
|
|
|
|
/* Compare signal strengths for all 3 receivers. */
|
|
for (i = 0; i < NUM_RX_CHAINS; i++) {
|
|
if (i != max_average_sig_antenna_i) {
|
|
s32 rssi_delta = (max_average_sig -
|
|
average_sig[i]);
|
|
|
|
/* If signal is very weak, compared with
|
|
* strongest, mark it as disconnected. */
|
|
if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
|
|
data->disconn_array[i] = 1;
|
|
else
|
|
active_chains |= (1 << i);
|
|
IWL_DEBUG_CALIB("i = %d rssiDelta = %d "
|
|
"disconn_array[i] = %d\n",
|
|
i, rssi_delta, data->disconn_array[i]);
|
|
}
|
|
}
|
|
|
|
/*If both chains A & B are disconnected -
|
|
* connect B and leave A as is */
|
|
if (data->disconn_array[CHAIN_A] &&
|
|
data->disconn_array[CHAIN_B]) {
|
|
data->disconn_array[CHAIN_B] = 0;
|
|
active_chains |= (1 << CHAIN_B);
|
|
IWL_DEBUG_CALIB("both A & B chains are disconnected! "
|
|
"W/A - declare B as connected\n");
|
|
}
|
|
|
|
IWL_DEBUG_CALIB("active_chains (bitwise) = 0x%x\n",
|
|
active_chains);
|
|
|
|
/* Save for use within RXON, TX, SCAN commands, etc. */
|
|
priv->valid_antenna = active_chains;
|
|
|
|
/* Analyze noise for rx balance */
|
|
average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS);
|
|
average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS);
|
|
average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS);
|
|
|
|
for (i = 0; i < NUM_RX_CHAINS; i++) {
|
|
if (!(data->disconn_array[i]) &&
|
|
(average_noise[i] <= min_average_noise)) {
|
|
/* This means that chain i is active and has
|
|
* lower noise values so far: */
|
|
min_average_noise = average_noise[i];
|
|
min_average_noise_antenna_i = i;
|
|
}
|
|
}
|
|
|
|
data->delta_gain_code[min_average_noise_antenna_i] = 0;
|
|
|
|
IWL_DEBUG_CALIB("average_noise: a %d b %d c %d\n",
|
|
average_noise[0], average_noise[1],
|
|
average_noise[2]);
|
|
|
|
IWL_DEBUG_CALIB("min_average_noise = %d, antenna %d\n",
|
|
min_average_noise, min_average_noise_antenna_i);
|
|
|
|
for (i = 0; i < NUM_RX_CHAINS; i++) {
|
|
s32 delta_g = 0;
|
|
|
|
if (!(data->disconn_array[i]) &&
|
|
(data->delta_gain_code[i] ==
|
|
CHAIN_NOISE_DELTA_GAIN_INIT_VAL)) {
|
|
delta_g = average_noise[i] - min_average_noise;
|
|
data->delta_gain_code[i] = (u8)((delta_g *
|
|
10) / 15);
|
|
if (CHAIN_NOISE_MAX_DELTA_GAIN_CODE <
|
|
data->delta_gain_code[i])
|
|
data->delta_gain_code[i] =
|
|
CHAIN_NOISE_MAX_DELTA_GAIN_CODE;
|
|
|
|
data->delta_gain_code[i] =
|
|
(data->delta_gain_code[i] | (1 << 2));
|
|
} else
|
|
data->delta_gain_code[i] = 0;
|
|
}
|
|
IWL_DEBUG_CALIB("delta_gain_codes: a %d b %d c %d\n",
|
|
data->delta_gain_code[0],
|
|
data->delta_gain_code[1],
|
|
data->delta_gain_code[2]);
|
|
|
|
/* Differential gain gets sent to uCode only once */
|
|
if (!data->radio_write) {
|
|
struct iwl4965_calibration_cmd cmd;
|
|
data->radio_write = 1;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
cmd.opCode = PHY_CALIBRATE_DIFF_GAIN_CMD;
|
|
cmd.diff_gain_a = data->delta_gain_code[0];
|
|
cmd.diff_gain_b = data->delta_gain_code[1];
|
|
cmd.diff_gain_c = data->delta_gain_code[2];
|
|
rc = iwl4965_send_cmd_pdu(priv, REPLY_PHY_CALIBRATION_CMD,
|
|
sizeof(cmd), &cmd);
|
|
if (rc)
|
|
IWL_DEBUG_CALIB("fail sending cmd "
|
|
"REPLY_PHY_CALIBRATION_CMD \n");
|
|
|
|
/* TODO we might want recalculate
|
|
* rx_chain in rxon cmd */
|
|
|
|
/* Mark so we run this algo only once! */
|
|
data->state = IWL_CHAIN_NOISE_CALIBRATED;
|
|
}
|
|
data->chain_noise_a = 0;
|
|
data->chain_noise_b = 0;
|
|
data->chain_noise_c = 0;
|
|
data->chain_signal_a = 0;
|
|
data->chain_signal_b = 0;
|
|
data->chain_signal_c = 0;
|
|
data->beacon_count = 0;
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void iwl4965_sensitivity_calibration(struct iwl4965_priv *priv,
|
|
struct iwl4965_notif_statistics *resp)
|
|
{
|
|
int rc = 0;
|
|
u32 rx_enable_time;
|
|
u32 fa_cck;
|
|
u32 fa_ofdm;
|
|
u32 bad_plcp_cck;
|
|
u32 bad_plcp_ofdm;
|
|
u32 norm_fa_ofdm;
|
|
u32 norm_fa_cck;
|
|
struct iwl4965_sensitivity_data *data = NULL;
|
|
struct statistics_rx_non_phy *rx_info = &(resp->rx.general);
|
|
struct statistics_rx *statistics = &(resp->rx);
|
|
unsigned long flags;
|
|
struct statistics_general_data statis;
|
|
|
|
data = &(priv->sensitivity_data);
|
|
|
|
if (!iwl4965_is_associated(priv)) {
|
|
IWL_DEBUG_CALIB("<< - not associated\n");
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
|
|
IWL_DEBUG_CALIB("<< invalid data.\n");
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return;
|
|
}
|
|
|
|
/* Extract Statistics: */
|
|
rx_enable_time = le32_to_cpu(rx_info->channel_load);
|
|
fa_cck = le32_to_cpu(statistics->cck.false_alarm_cnt);
|
|
fa_ofdm = le32_to_cpu(statistics->ofdm.false_alarm_cnt);
|
|
bad_plcp_cck = le32_to_cpu(statistics->cck.plcp_err);
|
|
bad_plcp_ofdm = le32_to_cpu(statistics->ofdm.plcp_err);
|
|
|
|
statis.beacon_silence_rssi_a =
|
|
le32_to_cpu(statistics->general.beacon_silence_rssi_a);
|
|
statis.beacon_silence_rssi_b =
|
|
le32_to_cpu(statistics->general.beacon_silence_rssi_b);
|
|
statis.beacon_silence_rssi_c =
|
|
le32_to_cpu(statistics->general.beacon_silence_rssi_c);
|
|
statis.beacon_energy_a =
|
|
le32_to_cpu(statistics->general.beacon_energy_a);
|
|
statis.beacon_energy_b =
|
|
le32_to_cpu(statistics->general.beacon_energy_b);
|
|
statis.beacon_energy_c =
|
|
le32_to_cpu(statistics->general.beacon_energy_c);
|
|
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
IWL_DEBUG_CALIB("rx_enable_time = %u usecs\n", rx_enable_time);
|
|
|
|
if (!rx_enable_time) {
|
|
IWL_DEBUG_CALIB("<< RX Enable Time == 0! \n");
|
|
return;
|
|
}
|
|
|
|
/* These statistics increase monotonically, and do not reset
|
|
* at each beacon. Calculate difference from last value, or just
|
|
* use the new statistics value if it has reset or wrapped around. */
|
|
if (data->last_bad_plcp_cnt_cck > bad_plcp_cck)
|
|
data->last_bad_plcp_cnt_cck = bad_plcp_cck;
|
|
else {
|
|
bad_plcp_cck -= data->last_bad_plcp_cnt_cck;
|
|
data->last_bad_plcp_cnt_cck += bad_plcp_cck;
|
|
}
|
|
|
|
if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm)
|
|
data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm;
|
|
else {
|
|
bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm;
|
|
data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm;
|
|
}
|
|
|
|
if (data->last_fa_cnt_ofdm > fa_ofdm)
|
|
data->last_fa_cnt_ofdm = fa_ofdm;
|
|
else {
|
|
fa_ofdm -= data->last_fa_cnt_ofdm;
|
|
data->last_fa_cnt_ofdm += fa_ofdm;
|
|
}
|
|
|
|
if (data->last_fa_cnt_cck > fa_cck)
|
|
data->last_fa_cnt_cck = fa_cck;
|
|
else {
|
|
fa_cck -= data->last_fa_cnt_cck;
|
|
data->last_fa_cnt_cck += fa_cck;
|
|
}
|
|
|
|
/* Total aborted signal locks */
|
|
norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
|
|
norm_fa_cck = fa_cck + bad_plcp_cck;
|
|
|
|
IWL_DEBUG_CALIB("cck: fa %u badp %u ofdm: fa %u badp %u\n", fa_cck,
|
|
bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);
|
|
|
|
iwl4965_sens_auto_corr_ofdm(priv, norm_fa_ofdm, rx_enable_time);
|
|
iwl4965_sens_energy_cck(priv, norm_fa_cck, rx_enable_time, &statis);
|
|
rc |= iwl4965_sensitivity_write(priv, CMD_ASYNC);
|
|
|
|
return;
|
|
}
|
|
|
|
static void iwl4965_bg_sensitivity_work(struct work_struct *work)
|
|
{
|
|
struct iwl4965_priv *priv = container_of(work, struct iwl4965_priv,
|
|
sensitivity_work);
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
|
|
test_bit(STATUS_SCANNING, &priv->status)) {
|
|
mutex_unlock(&priv->mutex);
|
|
return;
|
|
}
|
|
|
|
if (priv->start_calib) {
|
|
iwl4965_noise_calibration(priv, &priv->statistics);
|
|
|
|
if (priv->sensitivity_data.state ==
|
|
IWL_SENS_CALIB_NEED_REINIT) {
|
|
iwl4965_init_sensitivity(priv, CMD_ASYNC, 0);
|
|
priv->sensitivity_data.state = IWL_SENS_CALIB_ALLOWED;
|
|
} else
|
|
iwl4965_sensitivity_calibration(priv,
|
|
&priv->statistics);
|
|
}
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
return;
|
|
}
|
|
#endif /*CONFIG_IWL4965_SENSITIVITY*/
|
|
|
|
static void iwl4965_bg_txpower_work(struct work_struct *work)
|
|
{
|
|
struct iwl4965_priv *priv = container_of(work, struct iwl4965_priv,
|
|
txpower_work);
|
|
|
|
/* If a scan happened to start before we got here
|
|
* then just return; the statistics notification will
|
|
* kick off another scheduled work to compensate for
|
|
* any temperature delta we missed here. */
|
|
if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
|
|
test_bit(STATUS_SCANNING, &priv->status))
|
|
return;
|
|
|
|
mutex_lock(&priv->mutex);
|
|
|
|
/* Regardless of if we are assocaited, we must reconfigure the
|
|
* TX power since frames can be sent on non-radar channels while
|
|
* not associated */
|
|
iwl4965_hw_reg_send_txpower(priv);
|
|
|
|
/* Update last_temperature to keep is_calib_needed from running
|
|
* when it isn't needed... */
|
|
priv->last_temperature = priv->temperature;
|
|
|
|
mutex_unlock(&priv->mutex);
|
|
}
|
|
|
|
/*
|
|
* Acquire priv->lock before calling this function !
|
|
*/
|
|
static void iwl4965_set_wr_ptrs(struct iwl4965_priv *priv, int txq_id, u32 index)
|
|
{
|
|
iwl4965_write_direct32(priv, HBUS_TARG_WRPTR,
|
|
(index & 0xff) | (txq_id << 8));
|
|
iwl4965_write_prph(priv, KDR_SCD_QUEUE_RDPTR(txq_id), index);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_queue_set_status - (optionally) start Tx/Cmd queue
|
|
* @tx_fifo_id: Tx DMA/FIFO channel (range 0-7) that the queue will feed
|
|
* @scd_retry: (1) Indicates queue will be used in aggregation mode
|
|
*
|
|
* NOTE: Acquire priv->lock before calling this function !
|
|
*/
|
|
static void iwl4965_tx_queue_set_status(struct iwl4965_priv *priv,
|
|
struct iwl4965_tx_queue *txq,
|
|
int tx_fifo_id, int scd_retry)
|
|
{
|
|
int txq_id = txq->q.id;
|
|
|
|
/* Find out whether to activate Tx queue */
|
|
int active = test_bit(txq_id, &priv->txq_ctx_active_msk)?1:0;
|
|
|
|
/* Set up and activate */
|
|
iwl4965_write_prph(priv, KDR_SCD_QUEUE_STATUS_BITS(txq_id),
|
|
(active << SCD_QUEUE_STTS_REG_POS_ACTIVE) |
|
|
(tx_fifo_id << SCD_QUEUE_STTS_REG_POS_TXF) |
|
|
(scd_retry << SCD_QUEUE_STTS_REG_POS_WSL) |
|
|
(scd_retry << SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
|
|
SCD_QUEUE_STTS_REG_MSK);
|
|
|
|
txq->sched_retry = scd_retry;
|
|
|
|
IWL_DEBUG_INFO("%s %s Queue %d on AC %d\n",
|
|
active ? "Activate" : "Deactivate",
|
|
scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
|
|
}
|
|
|
|
static const u16 default_queue_to_tx_fifo[] = {
|
|
IWL_TX_FIFO_AC3,
|
|
IWL_TX_FIFO_AC2,
|
|
IWL_TX_FIFO_AC1,
|
|
IWL_TX_FIFO_AC0,
|
|
IWL_CMD_FIFO_NUM,
|
|
IWL_TX_FIFO_HCCA_1,
|
|
IWL_TX_FIFO_HCCA_2
|
|
};
|
|
|
|
static inline void iwl4965_txq_ctx_activate(struct iwl4965_priv *priv, int txq_id)
|
|
{
|
|
set_bit(txq_id, &priv->txq_ctx_active_msk);
|
|
}
|
|
|
|
static inline void iwl4965_txq_ctx_deactivate(struct iwl4965_priv *priv, int txq_id)
|
|
{
|
|
clear_bit(txq_id, &priv->txq_ctx_active_msk);
|
|
}
|
|
|
|
int iwl4965_alive_notify(struct iwl4965_priv *priv)
|
|
{
|
|
u32 a;
|
|
int i = 0;
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
|
|
#ifdef CONFIG_IWL4965_SENSITIVITY
|
|
memset(&(priv->sensitivity_data), 0,
|
|
sizeof(struct iwl4965_sensitivity_data));
|
|
memset(&(priv->chain_noise_data), 0,
|
|
sizeof(struct iwl4965_chain_noise_data));
|
|
for (i = 0; i < NUM_RX_CHAINS; i++)
|
|
priv->chain_noise_data.delta_gain_code[i] =
|
|
CHAIN_NOISE_DELTA_GAIN_INIT_VAL;
|
|
#endif /* CONFIG_IWL4965_SENSITIVITY*/
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/* Clear 4965's internal Tx Scheduler data base */
|
|
priv->scd_base_addr = iwl4965_read_prph(priv, KDR_SCD_SRAM_BASE_ADDR);
|
|
a = priv->scd_base_addr + SCD_CONTEXT_DATA_OFFSET;
|
|
for (; a < priv->scd_base_addr + SCD_TX_STTS_BITMAP_OFFSET; a += 4)
|
|
iwl4965_write_targ_mem(priv, a, 0);
|
|
for (; a < priv->scd_base_addr + SCD_TRANSLATE_TBL_OFFSET; a += 4)
|
|
iwl4965_write_targ_mem(priv, a, 0);
|
|
for (; a < sizeof(u16) * priv->hw_setting.max_txq_num; a += 4)
|
|
iwl4965_write_targ_mem(priv, a, 0);
|
|
|
|
/* Tel 4965 where to find Tx byte count tables */
|
|
iwl4965_write_prph(priv, KDR_SCD_DRAM_BASE_ADDR,
|
|
(priv->hw_setting.shared_phys +
|
|
offsetof(struct iwl4965_shared, queues_byte_cnt_tbls)) >> 10);
|
|
|
|
/* Disable chain mode for all queues */
|
|
iwl4965_write_prph(priv, KDR_SCD_QUEUECHAIN_SEL, 0);
|
|
|
|
/* Initialize each Tx queue (including the command queue) */
|
|
for (i = 0; i < priv->hw_setting.max_txq_num; i++) {
|
|
|
|
/* TFD circular buffer read/write indexes */
|
|
iwl4965_write_prph(priv, KDR_SCD_QUEUE_RDPTR(i), 0);
|
|
iwl4965_write_direct32(priv, HBUS_TARG_WRPTR, 0 | (i << 8));
|
|
|
|
/* Max Tx Window size for Scheduler-ACK mode */
|
|
iwl4965_write_targ_mem(priv, priv->scd_base_addr +
|
|
SCD_CONTEXT_QUEUE_OFFSET(i),
|
|
(SCD_WIN_SIZE <<
|
|
SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
|
|
SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
|
|
|
|
/* Frame limit */
|
|
iwl4965_write_targ_mem(priv, priv->scd_base_addr +
|
|
SCD_CONTEXT_QUEUE_OFFSET(i) +
|
|
sizeof(u32),
|
|
(SCD_FRAME_LIMIT <<
|
|
SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
|
|
SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
|
|
|
|
}
|
|
iwl4965_write_prph(priv, KDR_SCD_INTERRUPT_MASK,
|
|
(1 << priv->hw_setting.max_txq_num) - 1);
|
|
|
|
/* Activate all Tx DMA/FIFO channels */
|
|
iwl4965_write_prph(priv, KDR_SCD_TXFACT,
|
|
SCD_TXFACT_REG_TXFIFO_MASK(0, 7));
|
|
|
|
iwl4965_set_wr_ptrs(priv, IWL_CMD_QUEUE_NUM, 0);
|
|
|
|
/* Map each Tx/cmd queue to its corresponding fifo */
|
|
for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
|
|
int ac = default_queue_to_tx_fifo[i];
|
|
iwl4965_txq_ctx_activate(priv, i);
|
|
iwl4965_tx_queue_set_status(priv, &priv->txq[i], ac, 0);
|
|
}
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_hw_set_hw_setting
|
|
*
|
|
* Called when initializing driver
|
|
*/
|
|
int iwl4965_hw_set_hw_setting(struct iwl4965_priv *priv)
|
|
{
|
|
/* Allocate area for Tx byte count tables and Rx queue status */
|
|
priv->hw_setting.shared_virt =
|
|
pci_alloc_consistent(priv->pci_dev,
|
|
sizeof(struct iwl4965_shared),
|
|
&priv->hw_setting.shared_phys);
|
|
|
|
if (!priv->hw_setting.shared_virt)
|
|
return -1;
|
|
|
|
memset(priv->hw_setting.shared_virt, 0, sizeof(struct iwl4965_shared));
|
|
|
|
priv->hw_setting.max_txq_num = iwl4965_param_queues_num;
|
|
priv->hw_setting.ac_queue_count = AC_NUM;
|
|
priv->hw_setting.tx_cmd_len = sizeof(struct iwl4965_tx_cmd);
|
|
priv->hw_setting.max_rxq_size = RX_QUEUE_SIZE;
|
|
priv->hw_setting.max_rxq_log = RX_QUEUE_SIZE_LOG;
|
|
if (iwl4965_param_amsdu_size_8K)
|
|
priv->hw_setting.rx_buf_size = IWL_RX_BUF_SIZE_8K;
|
|
else
|
|
priv->hw_setting.rx_buf_size = IWL_RX_BUF_SIZE_4K;
|
|
priv->hw_setting.max_pkt_size = priv->hw_setting.rx_buf_size - 256;
|
|
priv->hw_setting.max_stations = IWL4965_STATION_COUNT;
|
|
priv->hw_setting.bcast_sta_id = IWL4965_BROADCAST_ID;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_hw_txq_ctx_free - Free TXQ Context
|
|
*
|
|
* Destroy all TX DMA queues and structures
|
|
*/
|
|
void iwl4965_hw_txq_ctx_free(struct iwl4965_priv *priv)
|
|
{
|
|
int txq_id;
|
|
|
|
/* Tx queues */
|
|
for (txq_id = 0; txq_id < priv->hw_setting.max_txq_num; txq_id++)
|
|
iwl4965_tx_queue_free(priv, &priv->txq[txq_id]);
|
|
|
|
/* Keep-warm buffer */
|
|
iwl4965_kw_free(priv);
|
|
}
|
|
|
|
/**
|
|
* iwl4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
|
|
*
|
|
* Does NOT advance any TFD circular buffer read/write indexes
|
|
* Does NOT free the TFD itself (which is within circular buffer)
|
|
*/
|
|
int iwl4965_hw_txq_free_tfd(struct iwl4965_priv *priv, struct iwl4965_tx_queue *txq)
|
|
{
|
|
struct iwl4965_tfd_frame *bd_tmp = (struct iwl4965_tfd_frame *)&txq->bd[0];
|
|
struct iwl4965_tfd_frame *bd = &bd_tmp[txq->q.read_ptr];
|
|
struct pci_dev *dev = priv->pci_dev;
|
|
int i;
|
|
int counter = 0;
|
|
int index, is_odd;
|
|
|
|
/* Host command buffers stay mapped in memory, nothing to clean */
|
|
if (txq->q.id == IWL_CMD_QUEUE_NUM)
|
|
return 0;
|
|
|
|
/* Sanity check on number of chunks */
|
|
counter = IWL_GET_BITS(*bd, num_tbs);
|
|
if (counter > MAX_NUM_OF_TBS) {
|
|
IWL_ERROR("Too many chunks: %i\n", counter);
|
|
/* @todo issue fatal error, it is quite serious situation */
|
|
return 0;
|
|
}
|
|
|
|
/* Unmap chunks, if any.
|
|
* TFD info for odd chunks is different format than for even chunks. */
|
|
for (i = 0; i < counter; i++) {
|
|
index = i / 2;
|
|
is_odd = i & 0x1;
|
|
|
|
if (is_odd)
|
|
pci_unmap_single(
|
|
dev,
|
|
IWL_GET_BITS(bd->pa[index], tb2_addr_lo16) |
|
|
(IWL_GET_BITS(bd->pa[index],
|
|
tb2_addr_hi20) << 16),
|
|
IWL_GET_BITS(bd->pa[index], tb2_len),
|
|
PCI_DMA_TODEVICE);
|
|
|
|
else if (i > 0)
|
|
pci_unmap_single(dev,
|
|
le32_to_cpu(bd->pa[index].tb1_addr),
|
|
IWL_GET_BITS(bd->pa[index], tb1_len),
|
|
PCI_DMA_TODEVICE);
|
|
|
|
/* Free SKB, if any, for this chunk */
|
|
if (txq->txb[txq->q.read_ptr].skb[i]) {
|
|
struct sk_buff *skb = txq->txb[txq->q.read_ptr].skb[i];
|
|
|
|
dev_kfree_skb(skb);
|
|
txq->txb[txq->q.read_ptr].skb[i] = NULL;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int iwl4965_hw_reg_set_txpower(struct iwl4965_priv *priv, s8 power)
|
|
{
|
|
IWL_ERROR("TODO: Implement iwl4965_hw_reg_set_txpower!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static s32 iwl4965_math_div_round(s32 num, s32 denom, s32 *res)
|
|
{
|
|
s32 sign = 1;
|
|
|
|
if (num < 0) {
|
|
sign = -sign;
|
|
num = -num;
|
|
}
|
|
if (denom < 0) {
|
|
sign = -sign;
|
|
denom = -denom;
|
|
}
|
|
*res = 1;
|
|
*res = ((num * 2 + denom) / (denom * 2)) * sign;
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_get_voltage_compensation - Power supply voltage comp for txpower
|
|
*
|
|
* Determines power supply voltage compensation for txpower calculations.
|
|
* Returns number of 1/2-dB steps to subtract from gain table index,
|
|
* to compensate for difference between power supply voltage during
|
|
* factory measurements, vs. current power supply voltage.
|
|
*
|
|
* Voltage indication is higher for lower voltage.
|
|
* Lower voltage requires more gain (lower gain table index).
|
|
*/
|
|
static s32 iwl4965_get_voltage_compensation(s32 eeprom_voltage,
|
|
s32 current_voltage)
|
|
{
|
|
s32 comp = 0;
|
|
|
|
if ((TX_POWER_IWL_ILLEGAL_VOLTAGE == eeprom_voltage) ||
|
|
(TX_POWER_IWL_ILLEGAL_VOLTAGE == current_voltage))
|
|
return 0;
|
|
|
|
iwl4965_math_div_round(current_voltage - eeprom_voltage,
|
|
TX_POWER_IWL_VOLTAGE_CODES_PER_03V, &comp);
|
|
|
|
if (current_voltage > eeprom_voltage)
|
|
comp *= 2;
|
|
if ((comp < -2) || (comp > 2))
|
|
comp = 0;
|
|
|
|
return comp;
|
|
}
|
|
|
|
static const struct iwl4965_channel_info *
|
|
iwl4965_get_channel_txpower_info(struct iwl4965_priv *priv, u8 phymode, u16 channel)
|
|
{
|
|
const struct iwl4965_channel_info *ch_info;
|
|
|
|
ch_info = iwl4965_get_channel_info(priv, phymode, channel);
|
|
|
|
if (!is_channel_valid(ch_info))
|
|
return NULL;
|
|
|
|
return ch_info;
|
|
}
|
|
|
|
static s32 iwl4965_get_tx_atten_grp(u16 channel)
|
|
{
|
|
if (channel >= CALIB_IWL_TX_ATTEN_GR5_FCH &&
|
|
channel <= CALIB_IWL_TX_ATTEN_GR5_LCH)
|
|
return CALIB_CH_GROUP_5;
|
|
|
|
if (channel >= CALIB_IWL_TX_ATTEN_GR1_FCH &&
|
|
channel <= CALIB_IWL_TX_ATTEN_GR1_LCH)
|
|
return CALIB_CH_GROUP_1;
|
|
|
|
if (channel >= CALIB_IWL_TX_ATTEN_GR2_FCH &&
|
|
channel <= CALIB_IWL_TX_ATTEN_GR2_LCH)
|
|
return CALIB_CH_GROUP_2;
|
|
|
|
if (channel >= CALIB_IWL_TX_ATTEN_GR3_FCH &&
|
|
channel <= CALIB_IWL_TX_ATTEN_GR3_LCH)
|
|
return CALIB_CH_GROUP_3;
|
|
|
|
if (channel >= CALIB_IWL_TX_ATTEN_GR4_FCH &&
|
|
channel <= CALIB_IWL_TX_ATTEN_GR4_LCH)
|
|
return CALIB_CH_GROUP_4;
|
|
|
|
IWL_ERROR("Can't find txatten group for channel %d.\n", channel);
|
|
return -1;
|
|
}
|
|
|
|
static u32 iwl4965_get_sub_band(const struct iwl4965_priv *priv, u32 channel)
|
|
{
|
|
s32 b = -1;
|
|
|
|
for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
|
|
if (priv->eeprom.calib_info.band_info[b].ch_from == 0)
|
|
continue;
|
|
|
|
if ((channel >= priv->eeprom.calib_info.band_info[b].ch_from)
|
|
&& (channel <= priv->eeprom.calib_info.band_info[b].ch_to))
|
|
break;
|
|
}
|
|
|
|
return b;
|
|
}
|
|
|
|
static s32 iwl4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
|
|
{
|
|
s32 val;
|
|
|
|
if (x2 == x1)
|
|
return y1;
|
|
else {
|
|
iwl4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
|
|
return val + y2;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* iwl4965_interpolate_chan - Interpolate factory measurements for one channel
|
|
*
|
|
* Interpolates factory measurements from the two sample channels within a
|
|
* sub-band, to apply to channel of interest. Interpolation is proportional to
|
|
* differences in channel frequencies, which is proportional to differences
|
|
* in channel number.
|
|
*/
|
|
static int iwl4965_interpolate_chan(struct iwl4965_priv *priv, u32 channel,
|
|
struct iwl4965_eeprom_calib_ch_info *chan_info)
|
|
{
|
|
s32 s = -1;
|
|
u32 c;
|
|
u32 m;
|
|
const struct iwl4965_eeprom_calib_measure *m1;
|
|
const struct iwl4965_eeprom_calib_measure *m2;
|
|
struct iwl4965_eeprom_calib_measure *omeas;
|
|
u32 ch_i1;
|
|
u32 ch_i2;
|
|
|
|
s = iwl4965_get_sub_band(priv, channel);
|
|
if (s >= EEPROM_TX_POWER_BANDS) {
|
|
IWL_ERROR("Tx Power can not find channel %d ", channel);
|
|
return -1;
|
|
}
|
|
|
|
ch_i1 = priv->eeprom.calib_info.band_info[s].ch1.ch_num;
|
|
ch_i2 = priv->eeprom.calib_info.band_info[s].ch2.ch_num;
|
|
chan_info->ch_num = (u8) channel;
|
|
|
|
IWL_DEBUG_TXPOWER("channel %d subband %d factory cal ch %d & %d\n",
|
|
channel, s, ch_i1, ch_i2);
|
|
|
|
for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
|
|
for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
|
|
m1 = &(priv->eeprom.calib_info.band_info[s].ch1.
|
|
measurements[c][m]);
|
|
m2 = &(priv->eeprom.calib_info.band_info[s].ch2.
|
|
measurements[c][m]);
|
|
omeas = &(chan_info->measurements[c][m]);
|
|
|
|
omeas->actual_pow =
|
|
(u8) iwl4965_interpolate_value(channel, ch_i1,
|
|
m1->actual_pow,
|
|
ch_i2,
|
|
m2->actual_pow);
|
|
omeas->gain_idx =
|
|
(u8) iwl4965_interpolate_value(channel, ch_i1,
|
|
m1->gain_idx, ch_i2,
|
|
m2->gain_idx);
|
|
omeas->temperature =
|
|
(u8) iwl4965_interpolate_value(channel, ch_i1,
|
|
m1->temperature,
|
|
ch_i2,
|
|
m2->temperature);
|
|
omeas->pa_det =
|
|
(s8) iwl4965_interpolate_value(channel, ch_i1,
|
|
m1->pa_det, ch_i2,
|
|
m2->pa_det);
|
|
|
|
IWL_DEBUG_TXPOWER
|
|
("chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
|
|
m1->actual_pow, m2->actual_pow, omeas->actual_pow);
|
|
IWL_DEBUG_TXPOWER
|
|
("chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
|
|
m1->gain_idx, m2->gain_idx, omeas->gain_idx);
|
|
IWL_DEBUG_TXPOWER
|
|
("chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
|
|
m1->pa_det, m2->pa_det, omeas->pa_det);
|
|
IWL_DEBUG_TXPOWER
|
|
("chain %d meas %d T1=%d T2=%d T=%d\n", c, m,
|
|
m1->temperature, m2->temperature,
|
|
omeas->temperature);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
|
|
* for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
|
|
static s32 back_off_table[] = {
|
|
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
|
|
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
|
|
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
|
|
10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
|
|
10 /* CCK */
|
|
};
|
|
|
|
/* Thermal compensation values for txpower for various frequency ranges ...
|
|
* ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
|
|
static struct iwl4965_txpower_comp_entry {
|
|
s32 degrees_per_05db_a;
|
|
s32 degrees_per_05db_a_denom;
|
|
} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
|
|
{9, 2}, /* group 0 5.2, ch 34-43 */
|
|
{4, 1}, /* group 1 5.2, ch 44-70 */
|
|
{4, 1}, /* group 2 5.2, ch 71-124 */
|
|
{4, 1}, /* group 3 5.2, ch 125-200 */
|
|
{3, 1} /* group 4 2.4, ch all */
|
|
};
|
|
|
|
static s32 get_min_power_index(s32 rate_power_index, u32 band)
|
|
{
|
|
if (!band) {
|
|
if ((rate_power_index & 7) <= 4)
|
|
return MIN_TX_GAIN_INDEX_52GHZ_EXT;
|
|
}
|
|
return MIN_TX_GAIN_INDEX;
|
|
}
|
|
|
|
struct gain_entry {
|
|
u8 dsp;
|
|
u8 radio;
|
|
};
|
|
|
|
static const struct gain_entry gain_table[2][108] = {
|
|
/* 5.2GHz power gain index table */
|
|
{
|
|
{123, 0x3F}, /* highest txpower */
|
|
{117, 0x3F},
|
|
{110, 0x3F},
|
|
{104, 0x3F},
|
|
{98, 0x3F},
|
|
{110, 0x3E},
|
|
{104, 0x3E},
|
|
{98, 0x3E},
|
|
{110, 0x3D},
|
|
{104, 0x3D},
|
|
{98, 0x3D},
|
|
{110, 0x3C},
|
|
{104, 0x3C},
|
|
{98, 0x3C},
|
|
{110, 0x3B},
|
|
{104, 0x3B},
|
|
{98, 0x3B},
|
|
{110, 0x3A},
|
|
{104, 0x3A},
|
|
{98, 0x3A},
|
|
{110, 0x39},
|
|
{104, 0x39},
|
|
{98, 0x39},
|
|
{110, 0x38},
|
|
{104, 0x38},
|
|
{98, 0x38},
|
|
{110, 0x37},
|
|
{104, 0x37},
|
|
{98, 0x37},
|
|
{110, 0x36},
|
|
{104, 0x36},
|
|
{98, 0x36},
|
|
{110, 0x35},
|
|
{104, 0x35},
|
|
{98, 0x35},
|
|
{110, 0x34},
|
|
{104, 0x34},
|
|
{98, 0x34},
|
|
{110, 0x33},
|
|
{104, 0x33},
|
|
{98, 0x33},
|
|
{110, 0x32},
|
|
{104, 0x32},
|
|
{98, 0x32},
|
|
{110, 0x31},
|
|
{104, 0x31},
|
|
{98, 0x31},
|
|
{110, 0x30},
|
|
{104, 0x30},
|
|
{98, 0x30},
|
|
{110, 0x25},
|
|
{104, 0x25},
|
|
{98, 0x25},
|
|
{110, 0x24},
|
|
{104, 0x24},
|
|
{98, 0x24},
|
|
{110, 0x23},
|
|
{104, 0x23},
|
|
{98, 0x23},
|
|
{110, 0x22},
|
|
{104, 0x18},
|
|
{98, 0x18},
|
|
{110, 0x17},
|
|
{104, 0x17},
|
|
{98, 0x17},
|
|
{110, 0x16},
|
|
{104, 0x16},
|
|
{98, 0x16},
|
|
{110, 0x15},
|
|
{104, 0x15},
|
|
{98, 0x15},
|
|
{110, 0x14},
|
|
{104, 0x14},
|
|
{98, 0x14},
|
|
{110, 0x13},
|
|
{104, 0x13},
|
|
{98, 0x13},
|
|
{110, 0x12},
|
|
{104, 0x08},
|
|
{98, 0x08},
|
|
{110, 0x07},
|
|
{104, 0x07},
|
|
{98, 0x07},
|
|
{110, 0x06},
|
|
{104, 0x06},
|
|
{98, 0x06},
|
|
{110, 0x05},
|
|
{104, 0x05},
|
|
{98, 0x05},
|
|
{110, 0x04},
|
|
{104, 0x04},
|
|
{98, 0x04},
|
|
{110, 0x03},
|
|
{104, 0x03},
|
|
{98, 0x03},
|
|
{110, 0x02},
|
|
{104, 0x02},
|
|
{98, 0x02},
|
|
{110, 0x01},
|
|
{104, 0x01},
|
|
{98, 0x01},
|
|
{110, 0x00},
|
|
{104, 0x00},
|
|
{98, 0x00},
|
|
{93, 0x00},
|
|
{88, 0x00},
|
|
{83, 0x00},
|
|
{78, 0x00},
|
|
},
|
|
/* 2.4GHz power gain index table */
|
|
{
|
|
{110, 0x3f}, /* highest txpower */
|
|
{104, 0x3f},
|
|
{98, 0x3f},
|
|
{110, 0x3e},
|
|
{104, 0x3e},
|
|
{98, 0x3e},
|
|
{110, 0x3d},
|
|
{104, 0x3d},
|
|
{98, 0x3d},
|
|
{110, 0x3c},
|
|
{104, 0x3c},
|
|
{98, 0x3c},
|
|
{110, 0x3b},
|
|
{104, 0x3b},
|
|
{98, 0x3b},
|
|
{110, 0x3a},
|
|
{104, 0x3a},
|
|
{98, 0x3a},
|
|
{110, 0x39},
|
|
{104, 0x39},
|
|
{98, 0x39},
|
|
{110, 0x38},
|
|
{104, 0x38},
|
|
{98, 0x38},
|
|
{110, 0x37},
|
|
{104, 0x37},
|
|
{98, 0x37},
|
|
{110, 0x36},
|
|
{104, 0x36},
|
|
{98, 0x36},
|
|
{110, 0x35},
|
|
{104, 0x35},
|
|
{98, 0x35},
|
|
{110, 0x34},
|
|
{104, 0x34},
|
|
{98, 0x34},
|
|
{110, 0x33},
|
|
{104, 0x33},
|
|
{98, 0x33},
|
|
{110, 0x32},
|
|
{104, 0x32},
|
|
{98, 0x32},
|
|
{110, 0x31},
|
|
{104, 0x31},
|
|
{98, 0x31},
|
|
{110, 0x30},
|
|
{104, 0x30},
|
|
{98, 0x30},
|
|
{110, 0x6},
|
|
{104, 0x6},
|
|
{98, 0x6},
|
|
{110, 0x5},
|
|
{104, 0x5},
|
|
{98, 0x5},
|
|
{110, 0x4},
|
|
{104, 0x4},
|
|
{98, 0x4},
|
|
{110, 0x3},
|
|
{104, 0x3},
|
|
{98, 0x3},
|
|
{110, 0x2},
|
|
{104, 0x2},
|
|
{98, 0x2},
|
|
{110, 0x1},
|
|
{104, 0x1},
|
|
{98, 0x1},
|
|
{110, 0x0},
|
|
{104, 0x0},
|
|
{98, 0x0},
|
|
{97, 0},
|
|
{96, 0},
|
|
{95, 0},
|
|
{94, 0},
|
|
{93, 0},
|
|
{92, 0},
|
|
{91, 0},
|
|
{90, 0},
|
|
{89, 0},
|
|
{88, 0},
|
|
{87, 0},
|
|
{86, 0},
|
|
{85, 0},
|
|
{84, 0},
|
|
{83, 0},
|
|
{82, 0},
|
|
{81, 0},
|
|
{80, 0},
|
|
{79, 0},
|
|
{78, 0},
|
|
{77, 0},
|
|
{76, 0},
|
|
{75, 0},
|
|
{74, 0},
|
|
{73, 0},
|
|
{72, 0},
|
|
{71, 0},
|
|
{70, 0},
|
|
{69, 0},
|
|
{68, 0},
|
|
{67, 0},
|
|
{66, 0},
|
|
{65, 0},
|
|
{64, 0},
|
|
{63, 0},
|
|
{62, 0},
|
|
{61, 0},
|
|
{60, 0},
|
|
{59, 0},
|
|
}
|
|
};
|
|
|
|
static int iwl4965_fill_txpower_tbl(struct iwl4965_priv *priv, u8 band, u16 channel,
|
|
u8 is_fat, u8 ctrl_chan_high,
|
|
struct iwl4965_tx_power_db *tx_power_tbl)
|
|
{
|
|
u8 saturation_power;
|
|
s32 target_power;
|
|
s32 user_target_power;
|
|
s32 power_limit;
|
|
s32 current_temp;
|
|
s32 reg_limit;
|
|
s32 current_regulatory;
|
|
s32 txatten_grp = CALIB_CH_GROUP_MAX;
|
|
int i;
|
|
int c;
|
|
const struct iwl4965_channel_info *ch_info = NULL;
|
|
struct iwl4965_eeprom_calib_ch_info ch_eeprom_info;
|
|
const struct iwl4965_eeprom_calib_measure *measurement;
|
|
s16 voltage;
|
|
s32 init_voltage;
|
|
s32 voltage_compensation;
|
|
s32 degrees_per_05db_num;
|
|
s32 degrees_per_05db_denom;
|
|
s32 factory_temp;
|
|
s32 temperature_comp[2];
|
|
s32 factory_gain_index[2];
|
|
s32 factory_actual_pwr[2];
|
|
s32 power_index;
|
|
|
|
/* Sanity check requested level (dBm) */
|
|
if (priv->user_txpower_limit < IWL_TX_POWER_TARGET_POWER_MIN) {
|
|
IWL_WARNING("Requested user TXPOWER %d below limit.\n",
|
|
priv->user_txpower_limit);
|
|
return -EINVAL;
|
|
}
|
|
if (priv->user_txpower_limit > IWL_TX_POWER_TARGET_POWER_MAX) {
|
|
IWL_WARNING("Requested user TXPOWER %d above limit.\n",
|
|
priv->user_txpower_limit);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* user_txpower_limit is in dBm, convert to half-dBm (half-dB units
|
|
* are used for indexing into txpower table) */
|
|
user_target_power = 2 * priv->user_txpower_limit;
|
|
|
|
/* Get current (RXON) channel, band, width */
|
|
ch_info =
|
|
iwl4965_get_channel_txpower_info(priv, priv->phymode, channel);
|
|
|
|
IWL_DEBUG_TXPOWER("chan %d band %d is_fat %d\n", channel, band,
|
|
is_fat);
|
|
|
|
if (!ch_info)
|
|
return -EINVAL;
|
|
|
|
/* get txatten group, used to select 1) thermal txpower adjustment
|
|
* and 2) mimo txpower balance between Tx chains. */
|
|
txatten_grp = iwl4965_get_tx_atten_grp(channel);
|
|
if (txatten_grp < 0)
|
|
return -EINVAL;
|
|
|
|
IWL_DEBUG_TXPOWER("channel %d belongs to txatten group %d\n",
|
|
channel, txatten_grp);
|
|
|
|
if (is_fat) {
|
|
if (ctrl_chan_high)
|
|
channel -= 2;
|
|
else
|
|
channel += 2;
|
|
}
|
|
|
|
/* hardware txpower limits ...
|
|
* saturation (clipping distortion) txpowers are in half-dBm */
|
|
if (band)
|
|
saturation_power = priv->eeprom.calib_info.saturation_power24;
|
|
else
|
|
saturation_power = priv->eeprom.calib_info.saturation_power52;
|
|
|
|
if (saturation_power < IWL_TX_POWER_SATURATION_MIN ||
|
|
saturation_power > IWL_TX_POWER_SATURATION_MAX) {
|
|
if (band)
|
|
saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_24;
|
|
else
|
|
saturation_power = IWL_TX_POWER_DEFAULT_SATURATION_52;
|
|
}
|
|
|
|
/* regulatory txpower limits ... reg_limit values are in half-dBm,
|
|
* max_power_avg values are in dBm, convert * 2 */
|
|
if (is_fat)
|
|
reg_limit = ch_info->fat_max_power_avg * 2;
|
|
else
|
|
reg_limit = ch_info->max_power_avg * 2;
|
|
|
|
if ((reg_limit < IWL_TX_POWER_REGULATORY_MIN) ||
|
|
(reg_limit > IWL_TX_POWER_REGULATORY_MAX)) {
|
|
if (band)
|
|
reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_24;
|
|
else
|
|
reg_limit = IWL_TX_POWER_DEFAULT_REGULATORY_52;
|
|
}
|
|
|
|
/* Interpolate txpower calibration values for this channel,
|
|
* based on factory calibration tests on spaced channels. */
|
|
iwl4965_interpolate_chan(priv, channel, &ch_eeprom_info);
|
|
|
|
/* calculate tx gain adjustment based on power supply voltage */
|
|
voltage = priv->eeprom.calib_info.voltage;
|
|
init_voltage = (s32)le32_to_cpu(priv->card_alive_init.voltage);
|
|
voltage_compensation =
|
|
iwl4965_get_voltage_compensation(voltage, init_voltage);
|
|
|
|
IWL_DEBUG_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n",
|
|
init_voltage,
|
|
voltage, voltage_compensation);
|
|
|
|
/* get current temperature (Celsius) */
|
|
current_temp = max(priv->temperature, IWL_TX_POWER_TEMPERATURE_MIN);
|
|
current_temp = min(priv->temperature, IWL_TX_POWER_TEMPERATURE_MAX);
|
|
current_temp = KELVIN_TO_CELSIUS(current_temp);
|
|
|
|
/* select thermal txpower adjustment params, based on channel group
|
|
* (same frequency group used for mimo txatten adjustment) */
|
|
degrees_per_05db_num =
|
|
tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
|
|
degrees_per_05db_denom =
|
|
tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
|
|
|
|
/* get per-chain txpower values from factory measurements */
|
|
for (c = 0; c < 2; c++) {
|
|
measurement = &ch_eeprom_info.measurements[c][1];
|
|
|
|
/* txgain adjustment (in half-dB steps) based on difference
|
|
* between factory and current temperature */
|
|
factory_temp = measurement->temperature;
|
|
iwl4965_math_div_round((current_temp - factory_temp) *
|
|
degrees_per_05db_denom,
|
|
degrees_per_05db_num,
|
|
&temperature_comp[c]);
|
|
|
|
factory_gain_index[c] = measurement->gain_idx;
|
|
factory_actual_pwr[c] = measurement->actual_pow;
|
|
|
|
IWL_DEBUG_TXPOWER("chain = %d\n", c);
|
|
IWL_DEBUG_TXPOWER("fctry tmp %d, "
|
|
"curr tmp %d, comp %d steps\n",
|
|
factory_temp, current_temp,
|
|
temperature_comp[c]);
|
|
|
|
IWL_DEBUG_TXPOWER("fctry idx %d, fctry pwr %d\n",
|
|
factory_gain_index[c],
|
|
factory_actual_pwr[c]);
|
|
}
|
|
|
|
/* for each of 33 bit-rates (including 1 for CCK) */
|
|
for (i = 0; i < POWER_TABLE_NUM_ENTRIES; i++) {
|
|
u8 is_mimo_rate;
|
|
union iwl4965_tx_power_dual_stream tx_power;
|
|
|
|
/* for mimo, reduce each chain's txpower by half
|
|
* (3dB, 6 steps), so total output power is regulatory
|
|
* compliant. */
|
|
if (i & 0x8) {
|
|
current_regulatory = reg_limit -
|
|
IWL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
|
|
is_mimo_rate = 1;
|
|
} else {
|
|
current_regulatory = reg_limit;
|
|
is_mimo_rate = 0;
|
|
}
|
|
|
|
/* find txpower limit, either hardware or regulatory */
|
|
power_limit = saturation_power - back_off_table[i];
|
|
if (power_limit > current_regulatory)
|
|
power_limit = current_regulatory;
|
|
|
|
/* reduce user's txpower request if necessary
|
|
* for this rate on this channel */
|
|
target_power = user_target_power;
|
|
if (target_power > power_limit)
|
|
target_power = power_limit;
|
|
|
|
IWL_DEBUG_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n",
|
|
i, saturation_power - back_off_table[i],
|
|
current_regulatory, user_target_power,
|
|
target_power);
|
|
|
|
/* for each of 2 Tx chains (radio transmitters) */
|
|
for (c = 0; c < 2; c++) {
|
|
s32 atten_value;
|
|
|
|
if (is_mimo_rate)
|
|
atten_value =
|
|
(s32)le32_to_cpu(priv->card_alive_init.
|
|
tx_atten[txatten_grp][c]);
|
|
else
|
|
atten_value = 0;
|
|
|
|
/* calculate index; higher index means lower txpower */
|
|
power_index = (u8) (factory_gain_index[c] -
|
|
(target_power -
|
|
factory_actual_pwr[c]) -
|
|
temperature_comp[c] -
|
|
voltage_compensation +
|
|
atten_value);
|
|
|
|
/* IWL_DEBUG_TXPOWER("calculated txpower index %d\n",
|
|
power_index); */
|
|
|
|
if (power_index < get_min_power_index(i, band))
|
|
power_index = get_min_power_index(i, band);
|
|
|
|
/* adjust 5 GHz index to support negative indexes */
|
|
if (!band)
|
|
power_index += 9;
|
|
|
|
/* CCK, rate 32, reduce txpower for CCK */
|
|
if (i == POWER_TABLE_CCK_ENTRY)
|
|
power_index +=
|
|
IWL_TX_POWER_CCK_COMPENSATION_C_STEP;
|
|
|
|
/* stay within the table! */
|
|
if (power_index > 107) {
|
|
IWL_WARNING("txpower index %d > 107\n",
|
|
power_index);
|
|
power_index = 107;
|
|
}
|
|
if (power_index < 0) {
|
|
IWL_WARNING("txpower index %d < 0\n",
|
|
power_index);
|
|
power_index = 0;
|
|
}
|
|
|
|
/* fill txpower command for this rate/chain */
|
|
tx_power.s.radio_tx_gain[c] =
|
|
gain_table[band][power_index].radio;
|
|
tx_power.s.dsp_predis_atten[c] =
|
|
gain_table[band][power_index].dsp;
|
|
|
|
IWL_DEBUG_TXPOWER("chain %d mimo %d index %d "
|
|
"gain 0x%02x dsp %d\n",
|
|
c, atten_value, power_index,
|
|
tx_power.s.radio_tx_gain[c],
|
|
tx_power.s.dsp_predis_atten[c]);
|
|
}/* for each chain */
|
|
|
|
tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
|
|
|
|
}/* for each rate */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_hw_reg_send_txpower - Configure the TXPOWER level user limit
|
|
*
|
|
* Uses the active RXON for channel, band, and characteristics (fat, high)
|
|
* The power limit is taken from priv->user_txpower_limit.
|
|
*/
|
|
int iwl4965_hw_reg_send_txpower(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_txpowertable_cmd cmd = { 0 };
|
|
int rc = 0;
|
|
u8 band = 0;
|
|
u8 is_fat = 0;
|
|
u8 ctrl_chan_high = 0;
|
|
|
|
if (test_bit(STATUS_SCANNING, &priv->status)) {
|
|
/* If this gets hit a lot, switch it to a BUG() and catch
|
|
* the stack trace to find out who is calling this during
|
|
* a scan. */
|
|
IWL_WARNING("TX Power requested while scanning!\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
band = ((priv->phymode == MODE_IEEE80211B) ||
|
|
(priv->phymode == MODE_IEEE80211G));
|
|
|
|
is_fat = is_fat_channel(priv->active_rxon.flags);
|
|
|
|
if (is_fat &&
|
|
(priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
|
|
ctrl_chan_high = 1;
|
|
|
|
cmd.band = band;
|
|
cmd.channel = priv->active_rxon.channel;
|
|
|
|
rc = iwl4965_fill_txpower_tbl(priv, band,
|
|
le16_to_cpu(priv->active_rxon.channel),
|
|
is_fat, ctrl_chan_high, &cmd.tx_power);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = iwl4965_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(cmd), &cmd);
|
|
return rc;
|
|
}
|
|
|
|
int iwl4965_hw_channel_switch(struct iwl4965_priv *priv, u16 channel)
|
|
{
|
|
int rc;
|
|
u8 band = 0;
|
|
u8 is_fat = 0;
|
|
u8 ctrl_chan_high = 0;
|
|
struct iwl4965_channel_switch_cmd cmd = { 0 };
|
|
const struct iwl4965_channel_info *ch_info;
|
|
|
|
band = ((priv->phymode == MODE_IEEE80211B) ||
|
|
(priv->phymode == MODE_IEEE80211G));
|
|
|
|
ch_info = iwl4965_get_channel_info(priv, priv->phymode, channel);
|
|
|
|
is_fat = is_fat_channel(priv->staging_rxon.flags);
|
|
|
|
if (is_fat &&
|
|
(priv->active_rxon.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
|
|
ctrl_chan_high = 1;
|
|
|
|
cmd.band = band;
|
|
cmd.expect_beacon = 0;
|
|
cmd.channel = cpu_to_le16(channel);
|
|
cmd.rxon_flags = priv->active_rxon.flags;
|
|
cmd.rxon_filter_flags = priv->active_rxon.filter_flags;
|
|
cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
|
|
if (ch_info)
|
|
cmd.expect_beacon = is_channel_radar(ch_info);
|
|
else
|
|
cmd.expect_beacon = 1;
|
|
|
|
rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_fat,
|
|
ctrl_chan_high, &cmd.tx_power);
|
|
if (rc) {
|
|
IWL_DEBUG_11H("error:%d fill txpower_tbl\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
rc = iwl4965_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
|
|
return rc;
|
|
}
|
|
|
|
#define RTS_HCCA_RETRY_LIMIT 3
|
|
#define RTS_DFAULT_RETRY_LIMIT 60
|
|
|
|
void iwl4965_hw_build_tx_cmd_rate(struct iwl4965_priv *priv,
|
|
struct iwl4965_cmd *cmd,
|
|
struct ieee80211_tx_control *ctrl,
|
|
struct ieee80211_hdr *hdr, int sta_id,
|
|
int is_hcca)
|
|
{
|
|
u8 rate;
|
|
u8 rts_retry_limit = 0;
|
|
u8 data_retry_limit = 0;
|
|
__le32 tx_flags;
|
|
u16 fc = le16_to_cpu(hdr->frame_control);
|
|
|
|
tx_flags = cmd->cmd.tx.tx_flags;
|
|
|
|
rate = iwl4965_rates[ctrl->tx_rate].plcp;
|
|
|
|
rts_retry_limit = (is_hcca) ?
|
|
RTS_HCCA_RETRY_LIMIT : RTS_DFAULT_RETRY_LIMIT;
|
|
|
|
if (ieee80211_is_probe_response(fc)) {
|
|
data_retry_limit = 3;
|
|
if (data_retry_limit < rts_retry_limit)
|
|
rts_retry_limit = data_retry_limit;
|
|
} else
|
|
data_retry_limit = IWL_DEFAULT_TX_RETRY;
|
|
|
|
if (priv->data_retry_limit != -1)
|
|
data_retry_limit = priv->data_retry_limit;
|
|
|
|
if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) {
|
|
switch (fc & IEEE80211_FCTL_STYPE) {
|
|
case IEEE80211_STYPE_AUTH:
|
|
case IEEE80211_STYPE_DEAUTH:
|
|
case IEEE80211_STYPE_ASSOC_REQ:
|
|
case IEEE80211_STYPE_REASSOC_REQ:
|
|
if (tx_flags & TX_CMD_FLG_RTS_MSK) {
|
|
tx_flags &= ~TX_CMD_FLG_RTS_MSK;
|
|
tx_flags |= TX_CMD_FLG_CTS_MSK;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
cmd->cmd.tx.rts_retry_limit = rts_retry_limit;
|
|
cmd->cmd.tx.data_retry_limit = data_retry_limit;
|
|
cmd->cmd.tx.rate_n_flags = iwl4965_hw_set_rate_n_flags(rate, 0);
|
|
cmd->cmd.tx.tx_flags = tx_flags;
|
|
}
|
|
|
|
int iwl4965_hw_get_rx_read(struct iwl4965_priv *priv)
|
|
{
|
|
struct iwl4965_shared *shared_data = priv->hw_setting.shared_virt;
|
|
|
|
return IWL_GET_BITS(*shared_data, rb_closed_stts_rb_num);
|
|
}
|
|
|
|
int iwl4965_hw_get_temperature(struct iwl4965_priv *priv)
|
|
{
|
|
return priv->temperature;
|
|
}
|
|
|
|
unsigned int iwl4965_hw_get_beacon_cmd(struct iwl4965_priv *priv,
|
|
struct iwl4965_frame *frame, u8 rate)
|
|
{
|
|
struct iwl4965_tx_beacon_cmd *tx_beacon_cmd;
|
|
unsigned int frame_size;
|
|
|
|
tx_beacon_cmd = &frame->u.beacon;
|
|
memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
|
|
|
|
tx_beacon_cmd->tx.sta_id = IWL4965_BROADCAST_ID;
|
|
tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
|
|
|
|
frame_size = iwl4965_fill_beacon_frame(priv,
|
|
tx_beacon_cmd->frame,
|
|
iwl4965_broadcast_addr,
|
|
sizeof(frame->u) - sizeof(*tx_beacon_cmd));
|
|
|
|
BUG_ON(frame_size > MAX_MPDU_SIZE);
|
|
tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
|
|
|
|
if ((rate == IWL_RATE_1M_PLCP) || (rate >= IWL_RATE_2M_PLCP))
|
|
tx_beacon_cmd->tx.rate_n_flags =
|
|
iwl4965_hw_set_rate_n_flags(rate, RATE_MCS_CCK_MSK);
|
|
else
|
|
tx_beacon_cmd->tx.rate_n_flags =
|
|
iwl4965_hw_set_rate_n_flags(rate, 0);
|
|
|
|
tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
|
|
TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK);
|
|
return (sizeof(*tx_beacon_cmd) + frame_size);
|
|
}
|
|
|
|
/*
|
|
* Tell 4965 where to find circular buffer of Tx Frame Descriptors for
|
|
* given Tx queue, and enable the DMA channel used for that queue.
|
|
*
|
|
* 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
|
|
* channels supported in hardware.
|
|
*/
|
|
int iwl4965_hw_tx_queue_init(struct iwl4965_priv *priv, struct iwl4965_tx_queue *txq)
|
|
{
|
|
int rc;
|
|
unsigned long flags;
|
|
int txq_id = txq->q.id;
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/* Circular buffer (TFD queue in DRAM) physical base address */
|
|
iwl4965_write_direct32(priv, FH_MEM_CBBC_QUEUE(txq_id),
|
|
txq->q.dma_addr >> 8);
|
|
|
|
/* Enable DMA channel, using same id as for TFD queue */
|
|
iwl4965_write_direct32(
|
|
priv, IWL_FH_TCSR_CHNL_TX_CONFIG_REG(txq_id),
|
|
IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
|
|
IWL_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL);
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 iwl4965_get_dma_hi_address(dma_addr_t addr)
|
|
{
|
|
return sizeof(addr) > sizeof(u32) ? (addr >> 16) >> 16 : 0;
|
|
}
|
|
|
|
int iwl4965_hw_txq_attach_buf_to_tfd(struct iwl4965_priv *priv, void *ptr,
|
|
dma_addr_t addr, u16 len)
|
|
{
|
|
int index, is_odd;
|
|
struct iwl4965_tfd_frame *tfd = ptr;
|
|
u32 num_tbs = IWL_GET_BITS(*tfd, num_tbs);
|
|
|
|
/* Each TFD can point to a maximum 20 Tx buffers */
|
|
if ((num_tbs >= MAX_NUM_OF_TBS) || (num_tbs < 0)) {
|
|
IWL_ERROR("Error can not send more than %d chunks\n",
|
|
MAX_NUM_OF_TBS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
index = num_tbs / 2;
|
|
is_odd = num_tbs & 0x1;
|
|
|
|
if (!is_odd) {
|
|
tfd->pa[index].tb1_addr = cpu_to_le32(addr);
|
|
IWL_SET_BITS(tfd->pa[index], tb1_addr_hi,
|
|
iwl4965_get_dma_hi_address(addr));
|
|
IWL_SET_BITS(tfd->pa[index], tb1_len, len);
|
|
} else {
|
|
IWL_SET_BITS(tfd->pa[index], tb2_addr_lo16,
|
|
(u32) (addr & 0xffff));
|
|
IWL_SET_BITS(tfd->pa[index], tb2_addr_hi20, addr >> 16);
|
|
IWL_SET_BITS(tfd->pa[index], tb2_len, len);
|
|
}
|
|
|
|
IWL_SET_BITS(*tfd, num_tbs, num_tbs + 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_hw_card_show_info(struct iwl4965_priv *priv)
|
|
{
|
|
u16 hw_version = priv->eeprom.board_revision_4965;
|
|
|
|
IWL_DEBUG_INFO("4965ABGN HW Version %u.%u.%u\n",
|
|
((hw_version >> 8) & 0x0F),
|
|
((hw_version >> 8) >> 4), (hw_version & 0x00FF));
|
|
|
|
IWL_DEBUG_INFO("4965ABGN PBA Number %.16s\n",
|
|
priv->eeprom.board_pba_number_4965);
|
|
}
|
|
|
|
#define IWL_TX_CRC_SIZE 4
|
|
#define IWL_TX_DELIMITER_SIZE 4
|
|
|
|
/**
|
|
* iwl4965_tx_queue_update_wr_ptr - Set up entry in Tx byte-count array
|
|
*/
|
|
int iwl4965_tx_queue_update_wr_ptr(struct iwl4965_priv *priv,
|
|
struct iwl4965_tx_queue *txq, u16 byte_cnt)
|
|
{
|
|
int len;
|
|
int txq_id = txq->q.id;
|
|
struct iwl4965_shared *shared_data = priv->hw_setting.shared_virt;
|
|
|
|
if (txq->need_update == 0)
|
|
return 0;
|
|
|
|
len = byte_cnt + IWL_TX_CRC_SIZE + IWL_TX_DELIMITER_SIZE;
|
|
|
|
/* Set up byte count within first 256 entries */
|
|
IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id].
|
|
tfd_offset[txq->q.write_ptr], byte_cnt, len);
|
|
|
|
/* If within first 64 entries, duplicate at end */
|
|
if (txq->q.write_ptr < IWL4965_MAX_WIN_SIZE)
|
|
IWL_SET_BITS16(shared_data->queues_byte_cnt_tbls[txq_id].
|
|
tfd_offset[IWL4965_QUEUE_SIZE + txq->q.write_ptr],
|
|
byte_cnt, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
|
|
*
|
|
* Selects how many and which Rx receivers/antennas/chains to use.
|
|
* This should not be used for scan command ... it puts data in wrong place.
|
|
*/
|
|
void iwl4965_set_rxon_chain(struct iwl4965_priv *priv)
|
|
{
|
|
u8 is_single = is_single_stream(priv);
|
|
u8 idle_state, rx_state;
|
|
|
|
priv->staging_rxon.rx_chain = 0;
|
|
rx_state = idle_state = 3;
|
|
|
|
/* Tell uCode which antennas are actually connected.
|
|
* Before first association, we assume all antennas are connected.
|
|
* Just after first association, iwl4965_noise_calibration()
|
|
* checks which antennas actually *are* connected. */
|
|
priv->staging_rxon.rx_chain |=
|
|
cpu_to_le16(priv->valid_antenna << RXON_RX_CHAIN_VALID_POS);
|
|
|
|
/* How many receivers should we use? */
|
|
iwl4965_get_rx_chain_counter(priv, &idle_state, &rx_state);
|
|
priv->staging_rxon.rx_chain |=
|
|
cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
|
|
priv->staging_rxon.rx_chain |=
|
|
cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
|
|
|
|
if (!is_single && (rx_state >= 2) &&
|
|
!test_bit(STATUS_POWER_PMI, &priv->status))
|
|
priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
|
|
else
|
|
priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
|
|
|
|
IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
/*
|
|
get the traffic load value for tid
|
|
*/
|
|
static u32 iwl4965_tl_get_load(struct iwl4965_priv *priv, u8 tid)
|
|
{
|
|
u32 load = 0;
|
|
u32 current_time = jiffies_to_msecs(jiffies);
|
|
u32 time_diff;
|
|
s32 index;
|
|
unsigned long flags;
|
|
struct iwl4965_traffic_load *tid_ptr = NULL;
|
|
|
|
if (tid >= TID_MAX_LOAD_COUNT)
|
|
return 0;
|
|
|
|
tid_ptr = &(priv->lq_mngr.agg_ctrl.traffic_load[tid]);
|
|
|
|
current_time -= current_time % TID_ROUND_VALUE;
|
|
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
if (!(tid_ptr->queue_count))
|
|
goto out;
|
|
|
|
time_diff = TIME_WRAP_AROUND(tid_ptr->time_stamp, current_time);
|
|
index = time_diff / TID_QUEUE_CELL_SPACING;
|
|
|
|
if (index >= TID_QUEUE_MAX_SIZE) {
|
|
u32 oldest_time = current_time - TID_MAX_TIME_DIFF;
|
|
|
|
while (tid_ptr->queue_count &&
|
|
(tid_ptr->time_stamp < oldest_time)) {
|
|
tid_ptr->total -= tid_ptr->packet_count[tid_ptr->head];
|
|
tid_ptr->packet_count[tid_ptr->head] = 0;
|
|
tid_ptr->time_stamp += TID_QUEUE_CELL_SPACING;
|
|
tid_ptr->queue_count--;
|
|
tid_ptr->head++;
|
|
if (tid_ptr->head >= TID_QUEUE_MAX_SIZE)
|
|
tid_ptr->head = 0;
|
|
}
|
|
}
|
|
load = tid_ptr->total;
|
|
|
|
out:
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
return load;
|
|
}
|
|
|
|
/*
|
|
increment traffic load value for tid and also remove
|
|
any old values if passed the certian time period
|
|
*/
|
|
static void iwl4965_tl_add_packet(struct iwl4965_priv *priv, u8 tid)
|
|
{
|
|
u32 current_time = jiffies_to_msecs(jiffies);
|
|
u32 time_diff;
|
|
s32 index;
|
|
unsigned long flags;
|
|
struct iwl4965_traffic_load *tid_ptr = NULL;
|
|
|
|
if (tid >= TID_MAX_LOAD_COUNT)
|
|
return;
|
|
|
|
tid_ptr = &(priv->lq_mngr.agg_ctrl.traffic_load[tid]);
|
|
|
|
current_time -= current_time % TID_ROUND_VALUE;
|
|
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
if (!(tid_ptr->queue_count)) {
|
|
tid_ptr->total = 1;
|
|
tid_ptr->time_stamp = current_time;
|
|
tid_ptr->queue_count = 1;
|
|
tid_ptr->head = 0;
|
|
tid_ptr->packet_count[0] = 1;
|
|
goto out;
|
|
}
|
|
|
|
time_diff = TIME_WRAP_AROUND(tid_ptr->time_stamp, current_time);
|
|
index = time_diff / TID_QUEUE_CELL_SPACING;
|
|
|
|
if (index >= TID_QUEUE_MAX_SIZE) {
|
|
u32 oldest_time = current_time - TID_MAX_TIME_DIFF;
|
|
|
|
while (tid_ptr->queue_count &&
|
|
(tid_ptr->time_stamp < oldest_time)) {
|
|
tid_ptr->total -= tid_ptr->packet_count[tid_ptr->head];
|
|
tid_ptr->packet_count[tid_ptr->head] = 0;
|
|
tid_ptr->time_stamp += TID_QUEUE_CELL_SPACING;
|
|
tid_ptr->queue_count--;
|
|
tid_ptr->head++;
|
|
if (tid_ptr->head >= TID_QUEUE_MAX_SIZE)
|
|
tid_ptr->head = 0;
|
|
}
|
|
}
|
|
|
|
index = (tid_ptr->head + index) % TID_QUEUE_MAX_SIZE;
|
|
tid_ptr->packet_count[index] = tid_ptr->packet_count[index] + 1;
|
|
tid_ptr->total = tid_ptr->total + 1;
|
|
|
|
if ((index + 1) > tid_ptr->queue_count)
|
|
tid_ptr->queue_count = index + 1;
|
|
out:
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
|
|
}
|
|
|
|
#define MMAC_SCHED_MAX_NUMBER_OF_HT_BACK_FLOWS 7
|
|
enum HT_STATUS {
|
|
BA_STATUS_FAILURE = 0,
|
|
BA_STATUS_INITIATOR_DELBA,
|
|
BA_STATUS_RECIPIENT_DELBA,
|
|
BA_STATUS_RENEW_ADDBA_REQUEST,
|
|
BA_STATUS_ACTIVE,
|
|
};
|
|
|
|
/**
|
|
* iwl4964_tl_ba_avail - Find out if an unused aggregation queue is available
|
|
*/
|
|
static u8 iwl4964_tl_ba_avail(struct iwl4965_priv *priv)
|
|
{
|
|
int i;
|
|
struct iwl4965_lq_mngr *lq;
|
|
u8 count = 0;
|
|
u16 msk;
|
|
|
|
lq = (struct iwl4965_lq_mngr *)&(priv->lq_mngr);
|
|
|
|
/* Find out how many agg queues are in use */
|
|
for (i = 0; i < TID_MAX_LOAD_COUNT ; i++) {
|
|
msk = 1 << i;
|
|
if ((lq->agg_ctrl.granted_ba & msk) ||
|
|
(lq->agg_ctrl.wait_for_agg_status & msk))
|
|
count++;
|
|
}
|
|
|
|
if (count < MMAC_SCHED_MAX_NUMBER_OF_HT_BACK_FLOWS)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void iwl4965_ba_status(struct iwl4965_priv *priv,
|
|
u8 tid, enum HT_STATUS status);
|
|
|
|
static int iwl4965_perform_addba(struct iwl4965_priv *priv, u8 tid, u32 length,
|
|
u32 ba_timeout)
|
|
{
|
|
int rc;
|
|
|
|
rc = ieee80211_start_BA_session(priv->hw, priv->bssid, tid);
|
|
if (rc)
|
|
iwl4965_ba_status(priv, tid, BA_STATUS_FAILURE);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int iwl4965_perform_delba(struct iwl4965_priv *priv, u8 tid)
|
|
{
|
|
int rc;
|
|
|
|
rc = ieee80211_stop_BA_session(priv->hw, priv->bssid, tid);
|
|
if (rc)
|
|
iwl4965_ba_status(priv, tid, BA_STATUS_FAILURE);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void iwl4965_turn_on_agg_for_tid(struct iwl4965_priv *priv,
|
|
struct iwl4965_lq_mngr *lq,
|
|
u8 auto_agg, u8 tid)
|
|
{
|
|
u32 tid_msk = (1 << tid);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
/*
|
|
if ((auto_agg) && (!lq->enable_counter)){
|
|
lq->agg_ctrl.next_retry = 0;
|
|
lq->agg_ctrl.tid_retry = 0;
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
return;
|
|
}
|
|
*/
|
|
if (!(lq->agg_ctrl.granted_ba & tid_msk) &&
|
|
(lq->agg_ctrl.requested_ba & tid_msk)) {
|
|
u8 available_queues;
|
|
u32 load;
|
|
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
available_queues = iwl4964_tl_ba_avail(priv);
|
|
load = iwl4965_tl_get_load(priv, tid);
|
|
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
if (!available_queues) {
|
|
if (auto_agg)
|
|
lq->agg_ctrl.tid_retry |= tid_msk;
|
|
else {
|
|
lq->agg_ctrl.requested_ba &= ~tid_msk;
|
|
lq->agg_ctrl.wait_for_agg_status &= ~tid_msk;
|
|
}
|
|
} else if ((auto_agg) &&
|
|
((load <= lq->agg_ctrl.tid_traffic_load_threshold) ||
|
|
((lq->agg_ctrl.wait_for_agg_status & tid_msk))))
|
|
lq->agg_ctrl.tid_retry |= tid_msk;
|
|
else {
|
|
lq->agg_ctrl.wait_for_agg_status |= tid_msk;
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
iwl4965_perform_addba(priv, tid, 0x40,
|
|
lq->agg_ctrl.ba_timeout);
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
}
|
|
|
|
static void iwl4965_turn_on_agg(struct iwl4965_priv *priv, u8 tid)
|
|
{
|
|
struct iwl4965_lq_mngr *lq;
|
|
unsigned long flags;
|
|
|
|
lq = (struct iwl4965_lq_mngr *)&(priv->lq_mngr);
|
|
|
|
if ((tid < TID_MAX_LOAD_COUNT))
|
|
iwl4965_turn_on_agg_for_tid(priv, lq, lq->agg_ctrl.auto_agg,
|
|
tid);
|
|
else if (tid == TID_ALL_SPECIFIED) {
|
|
if (lq->agg_ctrl.requested_ba) {
|
|
for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
|
|
iwl4965_turn_on_agg_for_tid(priv, lq,
|
|
lq->agg_ctrl.auto_agg, tid);
|
|
} else {
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
lq->agg_ctrl.tid_retry = 0;
|
|
lq->agg_ctrl.next_retry = 0;
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
void iwl4965_turn_off_agg(struct iwl4965_priv *priv, u8 tid)
|
|
{
|
|
u32 tid_msk;
|
|
struct iwl4965_lq_mngr *lq;
|
|
unsigned long flags;
|
|
|
|
lq = (struct iwl4965_lq_mngr *)&(priv->lq_mngr);
|
|
|
|
if ((tid < TID_MAX_LOAD_COUNT)) {
|
|
tid_msk = 1 << tid;
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
lq->agg_ctrl.wait_for_agg_status |= tid_msk;
|
|
lq->agg_ctrl.requested_ba &= ~tid_msk;
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
iwl4965_perform_delba(priv, tid);
|
|
} else if (tid == TID_ALL_SPECIFIED) {
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) {
|
|
tid_msk = 1 << tid;
|
|
lq->agg_ctrl.wait_for_agg_status |= tid_msk;
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
iwl4965_perform_delba(priv, tid);
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
}
|
|
lq->agg_ctrl.requested_ba = 0;
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* iwl4965_ba_status - Update driver's link quality mgr with tid's HT status
|
|
*/
|
|
static void iwl4965_ba_status(struct iwl4965_priv *priv,
|
|
u8 tid, enum HT_STATUS status)
|
|
{
|
|
struct iwl4965_lq_mngr *lq;
|
|
u32 tid_msk = (1 << tid);
|
|
unsigned long flags;
|
|
|
|
lq = (struct iwl4965_lq_mngr *)&(priv->lq_mngr);
|
|
|
|
if ((tid >= TID_MAX_LOAD_COUNT))
|
|
goto out;
|
|
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
switch (status) {
|
|
case BA_STATUS_ACTIVE:
|
|
if (!(lq->agg_ctrl.granted_ba & tid_msk))
|
|
lq->agg_ctrl.granted_ba |= tid_msk;
|
|
break;
|
|
default:
|
|
if ((lq->agg_ctrl.granted_ba & tid_msk))
|
|
lq->agg_ctrl.granted_ba &= ~tid_msk;
|
|
break;
|
|
}
|
|
|
|
lq->agg_ctrl.wait_for_agg_status &= ~tid_msk;
|
|
if (status != BA_STATUS_ACTIVE) {
|
|
if (lq->agg_ctrl.auto_agg) {
|
|
lq->agg_ctrl.tid_retry |= tid_msk;
|
|
lq->agg_ctrl.next_retry =
|
|
jiffies + msecs_to_jiffies(500);
|
|
} else
|
|
lq->agg_ctrl.requested_ba &= ~tid_msk;
|
|
}
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
out:
|
|
return;
|
|
}
|
|
|
|
static void iwl4965_bg_agg_work(struct work_struct *work)
|
|
{
|
|
struct iwl4965_priv *priv = container_of(work, struct iwl4965_priv,
|
|
agg_work);
|
|
|
|
u32 tid;
|
|
u32 retry_tid;
|
|
u32 tid_msk;
|
|
unsigned long flags;
|
|
struct iwl4965_lq_mngr *lq = (struct iwl4965_lq_mngr *)&(priv->lq_mngr);
|
|
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
retry_tid = lq->agg_ctrl.tid_retry;
|
|
lq->agg_ctrl.tid_retry = 0;
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
|
|
if (retry_tid == TID_ALL_SPECIFIED)
|
|
iwl4965_turn_on_agg(priv, TID_ALL_SPECIFIED);
|
|
else {
|
|
for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) {
|
|
tid_msk = (1 << tid);
|
|
if (retry_tid & tid_msk)
|
|
iwl4965_turn_on_agg(priv, tid);
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
if (lq->agg_ctrl.tid_retry)
|
|
lq->agg_ctrl.next_retry = jiffies + msecs_to_jiffies(500);
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
return;
|
|
}
|
|
#endif /*CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
int iwl4965_tx_cmd(struct iwl4965_priv *priv, struct iwl4965_cmd *out_cmd,
|
|
u8 sta_id, dma_addr_t txcmd_phys,
|
|
struct ieee80211_hdr *hdr, u8 hdr_len,
|
|
struct ieee80211_tx_control *ctrl, void *sta_in)
|
|
{
|
|
struct iwl4965_tx_cmd cmd;
|
|
struct iwl4965_tx_cmd *tx = (struct iwl4965_tx_cmd *)&out_cmd->cmd.payload[0];
|
|
dma_addr_t scratch_phys;
|
|
u8 unicast = 0;
|
|
u8 is_data = 1;
|
|
u16 fc;
|
|
u16 rate_flags;
|
|
int rate_index = min(ctrl->tx_rate & 0xffff, IWL_RATE_COUNT - 1);
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
__le16 *qc;
|
|
#endif /*CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
unicast = !is_multicast_ether_addr(hdr->addr1);
|
|
|
|
fc = le16_to_cpu(hdr->frame_control);
|
|
if ((fc & IEEE80211_FCTL_FTYPE) != IEEE80211_FTYPE_DATA)
|
|
is_data = 0;
|
|
|
|
memcpy(&cmd, &(out_cmd->cmd.tx), sizeof(struct iwl4965_tx_cmd));
|
|
memset(tx, 0, sizeof(struct iwl4965_tx_cmd));
|
|
memcpy(tx->hdr, hdr, hdr_len);
|
|
|
|
tx->len = cmd.len;
|
|
tx->driver_txop = cmd.driver_txop;
|
|
tx->stop_time.life_time = cmd.stop_time.life_time;
|
|
tx->tx_flags = cmd.tx_flags;
|
|
tx->sta_id = cmd.sta_id;
|
|
tx->tid_tspec = cmd.tid_tspec;
|
|
tx->timeout.pm_frame_timeout = cmd.timeout.pm_frame_timeout;
|
|
tx->next_frame_len = cmd.next_frame_len;
|
|
|
|
tx->sec_ctl = cmd.sec_ctl;
|
|
memcpy(&(tx->key[0]), &(cmd.key[0]), 16);
|
|
tx->tx_flags = cmd.tx_flags;
|
|
|
|
tx->rts_retry_limit = cmd.rts_retry_limit;
|
|
tx->data_retry_limit = cmd.data_retry_limit;
|
|
|
|
scratch_phys = txcmd_phys + sizeof(struct iwl4965_cmd_header) +
|
|
offsetof(struct iwl4965_tx_cmd, scratch);
|
|
tx->dram_lsb_ptr = cpu_to_le32(scratch_phys);
|
|
tx->dram_msb_ptr = iwl4965_get_dma_hi_address(scratch_phys);
|
|
|
|
/* Hard coded to start at the highest retry fallback position
|
|
* until the 4965 specific rate control algorithm is tied in */
|
|
tx->initial_rate_index = LINK_QUAL_MAX_RETRY_NUM - 1;
|
|
|
|
/* Alternate between antenna A and B for successive frames */
|
|
if (priv->use_ant_b_for_management_frame) {
|
|
priv->use_ant_b_for_management_frame = 0;
|
|
rate_flags = RATE_MCS_ANT_B_MSK;
|
|
} else {
|
|
priv->use_ant_b_for_management_frame = 1;
|
|
rate_flags = RATE_MCS_ANT_A_MSK;
|
|
}
|
|
|
|
if (!unicast || !is_data) {
|
|
if ((rate_index >= IWL_FIRST_CCK_RATE) &&
|
|
(rate_index <= IWL_LAST_CCK_RATE))
|
|
rate_flags |= RATE_MCS_CCK_MSK;
|
|
} else {
|
|
tx->initial_rate_index = 0;
|
|
tx->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
|
|
}
|
|
|
|
tx->rate_n_flags = iwl4965_hw_set_rate_n_flags(iwl4965_rates[rate_index].plcp,
|
|
rate_flags);
|
|
|
|
if (ieee80211_is_back_request(fc))
|
|
tx->tx_flags |= TX_CMD_FLG_ACK_MSK |
|
|
TX_CMD_FLG_IMM_BA_RSP_MASK;
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
qc = ieee80211_get_qos_ctrl(hdr);
|
|
if (qc &&
|
|
(priv->iw_mode != IEEE80211_IF_TYPE_IBSS)) {
|
|
u8 tid = 0;
|
|
tid = (u8) (le16_to_cpu(*qc) & 0xF);
|
|
if (tid < TID_MAX_LOAD_COUNT)
|
|
iwl4965_tl_add_packet(priv, tid);
|
|
}
|
|
|
|
if (priv->lq_mngr.agg_ctrl.next_retry &&
|
|
(time_after(priv->lq_mngr.agg_ctrl.next_retry, jiffies))) {
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->lq_mngr.lock, flags);
|
|
priv->lq_mngr.agg_ctrl.next_retry = 0;
|
|
spin_unlock_irqrestore(&priv->lq_mngr.lock, flags);
|
|
schedule_work(&priv->agg_work);
|
|
}
|
|
#endif
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sign_extend - Sign extend a value using specified bit as sign-bit
|
|
*
|
|
* Example: sign_extend(9, 3) would return -7 as bit3 of 1001b is 1
|
|
* and bit0..2 is 001b which when sign extended to 1111111111111001b is -7.
|
|
*
|
|
* @param oper value to sign extend
|
|
* @param index 0 based bit index (0<=index<32) to sign bit
|
|
*/
|
|
static s32 sign_extend(u32 oper, int index)
|
|
{
|
|
u8 shift = 31 - index;
|
|
|
|
return (s32)(oper << shift) >> shift;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_get_temperature - return the calibrated temperature (in Kelvin)
|
|
* @statistics: Provides the temperature reading from the uCode
|
|
*
|
|
* A return of <0 indicates bogus data in the statistics
|
|
*/
|
|
int iwl4965_get_temperature(const struct iwl4965_priv *priv)
|
|
{
|
|
s32 temperature;
|
|
s32 vt;
|
|
s32 R1, R2, R3;
|
|
u32 R4;
|
|
|
|
if (test_bit(STATUS_TEMPERATURE, &priv->status) &&
|
|
(priv->statistics.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)) {
|
|
IWL_DEBUG_TEMP("Running FAT temperature calibration\n");
|
|
R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[1]);
|
|
R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[1]);
|
|
R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[1]);
|
|
R4 = le32_to_cpu(priv->card_alive_init.therm_r4[1]);
|
|
} else {
|
|
IWL_DEBUG_TEMP("Running temperature calibration\n");
|
|
R1 = (s32)le32_to_cpu(priv->card_alive_init.therm_r1[0]);
|
|
R2 = (s32)le32_to_cpu(priv->card_alive_init.therm_r2[0]);
|
|
R3 = (s32)le32_to_cpu(priv->card_alive_init.therm_r3[0]);
|
|
R4 = le32_to_cpu(priv->card_alive_init.therm_r4[0]);
|
|
}
|
|
|
|
/*
|
|
* Temperature is only 23 bits, so sign extend out to 32.
|
|
*
|
|
* NOTE If we haven't received a statistics notification yet
|
|
* with an updated temperature, use R4 provided to us in the
|
|
* "initialize" ALIVE response.
|
|
*/
|
|
if (!test_bit(STATUS_TEMPERATURE, &priv->status))
|
|
vt = sign_extend(R4, 23);
|
|
else
|
|
vt = sign_extend(
|
|
le32_to_cpu(priv->statistics.general.temperature), 23);
|
|
|
|
IWL_DEBUG_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n",
|
|
R1, R2, R3, vt);
|
|
|
|
if (R3 == R1) {
|
|
IWL_ERROR("Calibration conflict R1 == R3\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Calculate temperature in degrees Kelvin, adjust by 97%.
|
|
* Add offset to center the adjustment around 0 degrees Centigrade. */
|
|
temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
|
|
temperature /= (R3 - R1);
|
|
temperature = (temperature * 97) / 100 +
|
|
TEMPERATURE_CALIB_KELVIN_OFFSET;
|
|
|
|
IWL_DEBUG_TEMP("Calibrated temperature: %dK, %dC\n", temperature,
|
|
KELVIN_TO_CELSIUS(temperature));
|
|
|
|
return temperature;
|
|
}
|
|
|
|
/* Adjust Txpower only if temperature variance is greater than threshold. */
|
|
#define IWL_TEMPERATURE_THRESHOLD 3
|
|
|
|
/**
|
|
* iwl4965_is_temp_calib_needed - determines if new calibration is needed
|
|
*
|
|
* If the temperature changed has changed sufficiently, then a recalibration
|
|
* is needed.
|
|
*
|
|
* Assumes caller will replace priv->last_temperature once calibration
|
|
* executed.
|
|
*/
|
|
static int iwl4965_is_temp_calib_needed(struct iwl4965_priv *priv)
|
|
{
|
|
int temp_diff;
|
|
|
|
if (!test_bit(STATUS_STATISTICS, &priv->status)) {
|
|
IWL_DEBUG_TEMP("Temperature not updated -- no statistics.\n");
|
|
return 0;
|
|
}
|
|
|
|
temp_diff = priv->temperature - priv->last_temperature;
|
|
|
|
/* get absolute value */
|
|
if (temp_diff < 0) {
|
|
IWL_DEBUG_POWER("Getting cooler, delta %d, \n", temp_diff);
|
|
temp_diff = -temp_diff;
|
|
} else if (temp_diff == 0)
|
|
IWL_DEBUG_POWER("Same temp, \n");
|
|
else
|
|
IWL_DEBUG_POWER("Getting warmer, delta %d, \n", temp_diff);
|
|
|
|
if (temp_diff < IWL_TEMPERATURE_THRESHOLD) {
|
|
IWL_DEBUG_POWER("Thermal txpower calib not needed\n");
|
|
return 0;
|
|
}
|
|
|
|
IWL_DEBUG_POWER("Thermal txpower calib needed\n");
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Calculate noise level, based on measurements during network silence just
|
|
* before arriving beacon. This measurement can be done only if we know
|
|
* exactly when to expect beacons, therefore only when we're associated. */
|
|
static void iwl4965_rx_calc_noise(struct iwl4965_priv *priv)
|
|
{
|
|
struct statistics_rx_non_phy *rx_info
|
|
= &(priv->statistics.rx.general);
|
|
int num_active_rx = 0;
|
|
int total_silence = 0;
|
|
int bcn_silence_a =
|
|
le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
|
|
int bcn_silence_b =
|
|
le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
|
|
int bcn_silence_c =
|
|
le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;
|
|
|
|
if (bcn_silence_a) {
|
|
total_silence += bcn_silence_a;
|
|
num_active_rx++;
|
|
}
|
|
if (bcn_silence_b) {
|
|
total_silence += bcn_silence_b;
|
|
num_active_rx++;
|
|
}
|
|
if (bcn_silence_c) {
|
|
total_silence += bcn_silence_c;
|
|
num_active_rx++;
|
|
}
|
|
|
|
/* Average among active antennas */
|
|
if (num_active_rx)
|
|
priv->last_rx_noise = (total_silence / num_active_rx) - 107;
|
|
else
|
|
priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
|
|
|
|
IWL_DEBUG_CALIB("inband silence a %u, b %u, c %u, dBm %d\n",
|
|
bcn_silence_a, bcn_silence_b, bcn_silence_c,
|
|
priv->last_rx_noise);
|
|
}
|
|
|
|
void iwl4965_hw_rx_statistics(struct iwl4965_priv *priv, struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
int change;
|
|
s32 temp;
|
|
|
|
IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n",
|
|
(int)sizeof(priv->statistics), pkt->len);
|
|
|
|
change = ((priv->statistics.general.temperature !=
|
|
pkt->u.stats.general.temperature) ||
|
|
((priv->statistics.flag &
|
|
STATISTICS_REPLY_FLG_FAT_MODE_MSK) !=
|
|
(pkt->u.stats.flag & STATISTICS_REPLY_FLG_FAT_MODE_MSK)));
|
|
|
|
memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics));
|
|
|
|
set_bit(STATUS_STATISTICS, &priv->status);
|
|
|
|
/* Reschedule the statistics timer to occur in
|
|
* REG_RECALIB_PERIOD seconds to ensure we get a
|
|
* thermal update even if the uCode doesn't give
|
|
* us one */
|
|
mod_timer(&priv->statistics_periodic, jiffies +
|
|
msecs_to_jiffies(REG_RECALIB_PERIOD * 1000));
|
|
|
|
if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
|
|
(pkt->hdr.cmd == STATISTICS_NOTIFICATION)) {
|
|
iwl4965_rx_calc_noise(priv);
|
|
#ifdef CONFIG_IWL4965_SENSITIVITY
|
|
queue_work(priv->workqueue, &priv->sensitivity_work);
|
|
#endif
|
|
}
|
|
|
|
/* If the hardware hasn't reported a change in
|
|
* temperature then don't bother computing a
|
|
* calibrated temperature value */
|
|
if (!change)
|
|
return;
|
|
|
|
temp = iwl4965_get_temperature(priv);
|
|
if (temp < 0)
|
|
return;
|
|
|
|
if (priv->temperature != temp) {
|
|
if (priv->temperature)
|
|
IWL_DEBUG_TEMP("Temperature changed "
|
|
"from %dC to %dC\n",
|
|
KELVIN_TO_CELSIUS(priv->temperature),
|
|
KELVIN_TO_CELSIUS(temp));
|
|
else
|
|
IWL_DEBUG_TEMP("Temperature "
|
|
"initialized to %dC\n",
|
|
KELVIN_TO_CELSIUS(temp));
|
|
}
|
|
|
|
priv->temperature = temp;
|
|
set_bit(STATUS_TEMPERATURE, &priv->status);
|
|
|
|
if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)) &&
|
|
iwl4965_is_temp_calib_needed(priv))
|
|
queue_work(priv->workqueue, &priv->txpower_work);
|
|
}
|
|
|
|
static void iwl4965_handle_data_packet(struct iwl4965_priv *priv, int is_data,
|
|
int include_phy,
|
|
struct iwl4965_rx_mem_buffer *rxb,
|
|
struct ieee80211_rx_status *stats)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (struct iwl4965_rx_packet *)rxb->skb->data;
|
|
struct iwl4965_rx_phy_res *rx_start = (include_phy) ?
|
|
(struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) : NULL;
|
|
struct ieee80211_hdr *hdr;
|
|
u16 len;
|
|
__le32 *rx_end;
|
|
unsigned int skblen;
|
|
u32 ampdu_status;
|
|
|
|
if (!include_phy && priv->last_phy_res[0])
|
|
rx_start = (struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
|
|
|
|
if (!rx_start) {
|
|
IWL_ERROR("MPDU frame without a PHY data\n");
|
|
return;
|
|
}
|
|
if (include_phy) {
|
|
hdr = (struct ieee80211_hdr *)((u8 *) & rx_start[1] +
|
|
rx_start->cfg_phy_cnt);
|
|
|
|
len = le16_to_cpu(rx_start->byte_count);
|
|
|
|
rx_end = (__le32 *) ((u8 *) & pkt->u.raw[0] +
|
|
sizeof(struct iwl4965_rx_phy_res) +
|
|
rx_start->cfg_phy_cnt + len);
|
|
|
|
} else {
|
|
struct iwl4965_rx_mpdu_res_start *amsdu =
|
|
(struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
|
|
|
|
hdr = (struct ieee80211_hdr *)(pkt->u.raw +
|
|
sizeof(struct iwl4965_rx_mpdu_res_start));
|
|
len = le16_to_cpu(amsdu->byte_count);
|
|
rx_start->byte_count = amsdu->byte_count;
|
|
rx_end = (__le32 *) (((u8 *) hdr) + len);
|
|
}
|
|
if (len > priv->hw_setting.max_pkt_size || len < 16) {
|
|
IWL_WARNING("byte count out of range [16,4K]"
|
|
" : %d\n", len);
|
|
return;
|
|
}
|
|
|
|
ampdu_status = le32_to_cpu(*rx_end);
|
|
skblen = ((u8 *) rx_end - (u8 *) & pkt->u.raw[0]) + sizeof(u32);
|
|
|
|
/* start from MAC */
|
|
skb_reserve(rxb->skb, (void *)hdr - (void *)pkt);
|
|
skb_put(rxb->skb, len); /* end where data ends */
|
|
|
|
/* We only process data packets if the interface is open */
|
|
if (unlikely(!priv->is_open)) {
|
|
IWL_DEBUG_DROP_LIMIT
|
|
("Dropping packet while interface is not open.\n");
|
|
return;
|
|
}
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
|
|
if (iwl4965_param_hwcrypto)
|
|
iwl4965_set_decrypted_flag(priv, rxb->skb,
|
|
ampdu_status, stats);
|
|
iwl4965_handle_data_packet_monitor(priv, rxb, hdr, len, stats, 0);
|
|
return;
|
|
}
|
|
|
|
stats->flag = 0;
|
|
hdr = (struct ieee80211_hdr *)rxb->skb->data;
|
|
|
|
if (iwl4965_param_hwcrypto)
|
|
iwl4965_set_decrypted_flag(priv, rxb->skb, ampdu_status, stats);
|
|
|
|
ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats);
|
|
priv->alloc_rxb_skb--;
|
|
rxb->skb = NULL;
|
|
#ifdef LED
|
|
priv->led_packets += len;
|
|
iwl4965_setup_activity_timer(priv);
|
|
#endif
|
|
}
|
|
|
|
/* Calc max signal level (dBm) among 3 possible receivers */
|
|
static int iwl4965_calc_rssi(struct iwl4965_rx_phy_res *rx_resp)
|
|
{
|
|
/* data from PHY/DSP regarding signal strength, etc.,
|
|
* contents are always there, not configurable by host. */
|
|
struct iwl4965_rx_non_cfg_phy *ncphy =
|
|
(struct iwl4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy;
|
|
u32 agc = (le16_to_cpu(ncphy->agc_info) & IWL_AGC_DB_MASK)
|
|
>> IWL_AGC_DB_POS;
|
|
|
|
u32 valid_antennae =
|
|
(le16_to_cpu(rx_resp->phy_flags) & RX_PHY_FLAGS_ANTENNAE_MASK)
|
|
>> RX_PHY_FLAGS_ANTENNAE_OFFSET;
|
|
u8 max_rssi = 0;
|
|
u32 i;
|
|
|
|
/* Find max rssi among 3 possible receivers.
|
|
* These values are measured by the digital signal processor (DSP).
|
|
* They should stay fairly constant even as the signal strength varies,
|
|
* if the radio's automatic gain control (AGC) is working right.
|
|
* AGC value (see below) will provide the "interesting" info. */
|
|
for (i = 0; i < 3; i++)
|
|
if (valid_antennae & (1 << i))
|
|
max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);
|
|
|
|
IWL_DEBUG_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
|
|
ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
|
|
max_rssi, agc);
|
|
|
|
/* dBm = max_rssi dB - agc dB - constant.
|
|
* Higher AGC (higher radio gain) means lower signal. */
|
|
return (max_rssi - agc - IWL_RSSI_OFFSET);
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
|
|
/* Parsed Information Elements */
|
|
struct ieee802_11_elems {
|
|
u8 *ds_params;
|
|
u8 ds_params_len;
|
|
u8 *tim;
|
|
u8 tim_len;
|
|
u8 *ibss_params;
|
|
u8 ibss_params_len;
|
|
u8 *erp_info;
|
|
u8 erp_info_len;
|
|
u8 *ht_cap_param;
|
|
u8 ht_cap_param_len;
|
|
u8 *ht_extra_param;
|
|
u8 ht_extra_param_len;
|
|
};
|
|
|
|
static int parse_elems(u8 *start, size_t len, struct ieee802_11_elems *elems)
|
|
{
|
|
size_t left = len;
|
|
u8 *pos = start;
|
|
int unknown = 0;
|
|
|
|
memset(elems, 0, sizeof(*elems));
|
|
|
|
while (left >= 2) {
|
|
u8 id, elen;
|
|
|
|
id = *pos++;
|
|
elen = *pos++;
|
|
left -= 2;
|
|
|
|
if (elen > left)
|
|
return -1;
|
|
|
|
switch (id) {
|
|
case WLAN_EID_DS_PARAMS:
|
|
elems->ds_params = pos;
|
|
elems->ds_params_len = elen;
|
|
break;
|
|
case WLAN_EID_TIM:
|
|
elems->tim = pos;
|
|
elems->tim_len = elen;
|
|
break;
|
|
case WLAN_EID_IBSS_PARAMS:
|
|
elems->ibss_params = pos;
|
|
elems->ibss_params_len = elen;
|
|
break;
|
|
case WLAN_EID_ERP_INFO:
|
|
elems->erp_info = pos;
|
|
elems->erp_info_len = elen;
|
|
break;
|
|
case WLAN_EID_HT_CAPABILITY:
|
|
elems->ht_cap_param = pos;
|
|
elems->ht_cap_param_len = elen;
|
|
break;
|
|
case WLAN_EID_HT_EXTRA_INFO:
|
|
elems->ht_extra_param = pos;
|
|
elems->ht_extra_param_len = elen;
|
|
break;
|
|
default:
|
|
unknown++;
|
|
break;
|
|
}
|
|
|
|
left -= elen;
|
|
pos += elen;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void iwl4965_init_ht_hw_capab(struct ieee80211_ht_info *ht_info, int mode)
|
|
{
|
|
ht_info->cap = 0;
|
|
memset(ht_info->supp_mcs_set, 0, 16);
|
|
|
|
ht_info->ht_supported = 1;
|
|
|
|
if (mode == MODE_IEEE80211A) {
|
|
ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
|
|
ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
|
|
ht_info->supp_mcs_set[4] = 0x01;
|
|
}
|
|
ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
|
|
ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
|
|
ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS &
|
|
(IWL_MIMO_PS_NONE << 2));
|
|
if (iwl4965_param_amsdu_size_8K) {
|
|
printk(KERN_DEBUG "iwl4965 in A-MSDU 8K support mode\n");
|
|
ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
|
|
}
|
|
|
|
ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
|
|
ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
|
|
|
|
ht_info->supp_mcs_set[0] = 0xFF;
|
|
ht_info->supp_mcs_set[1] = 0xFF;
|
|
}
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
static void iwl4965_sta_modify_ps_wake(struct iwl4965_priv *priv, int sta_id)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
priv->stations[sta_id].sta.station_flags &= ~STA_FLG_PWR_SAVE_MSK;
|
|
priv->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK;
|
|
priv->stations[sta_id].sta.sta.modify_mask = 0;
|
|
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
|
|
iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
|
|
}
|
|
|
|
static void iwl4965_update_ps_mode(struct iwl4965_priv *priv, u16 ps_bit, u8 *addr)
|
|
{
|
|
/* FIXME: need locking over ps_status ??? */
|
|
u8 sta_id = iwl4965_hw_find_station(priv, addr);
|
|
|
|
if (sta_id != IWL_INVALID_STATION) {
|
|
u8 sta_awake = priv->stations[sta_id].
|
|
ps_status == STA_PS_STATUS_WAKE;
|
|
|
|
if (sta_awake && ps_bit)
|
|
priv->stations[sta_id].ps_status = STA_PS_STATUS_SLEEP;
|
|
else if (!sta_awake && !ps_bit) {
|
|
iwl4965_sta_modify_ps_wake(priv, sta_id);
|
|
priv->stations[sta_id].ps_status = STA_PS_STATUS_WAKE;
|
|
}
|
|
}
|
|
}
|
|
|
|
#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
|
|
|
|
/* Called for REPLY_4965_RX (legacy ABG frames), or
|
|
* REPLY_RX_MPDU_CMD (HT high-throughput N frames). */
|
|
static void iwl4965_rx_reply_rx(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
/* Use phy data (Rx signal strength, etc.) contained within
|
|
* this rx packet for legacy frames,
|
|
* or phy data cached from REPLY_RX_PHY_CMD for HT frames. */
|
|
int include_phy = (pkt->hdr.cmd == REPLY_4965_RX);
|
|
struct iwl4965_rx_phy_res *rx_start = (include_phy) ?
|
|
(struct iwl4965_rx_phy_res *)&(pkt->u.raw[0]) :
|
|
(struct iwl4965_rx_phy_res *)&priv->last_phy_res[1];
|
|
__le32 *rx_end;
|
|
unsigned int len = 0;
|
|
struct ieee80211_hdr *header;
|
|
u16 fc;
|
|
struct ieee80211_rx_status stats = {
|
|
.mactime = le64_to_cpu(rx_start->timestamp),
|
|
.channel = le16_to_cpu(rx_start->channel),
|
|
.phymode =
|
|
(rx_start->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
|
|
MODE_IEEE80211G : MODE_IEEE80211A,
|
|
.antenna = 0,
|
|
.rate = iwl4965_hw_get_rate(rx_start->rate_n_flags),
|
|
.flag = 0,
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
.ordered = 0
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
};
|
|
u8 network_packet;
|
|
|
|
if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
|
|
IWL_DEBUG_DROP
|
|
("dsp size out of range [0,20]: "
|
|
"%d/n", rx_start->cfg_phy_cnt);
|
|
return;
|
|
}
|
|
if (!include_phy) {
|
|
if (priv->last_phy_res[0])
|
|
rx_start = (struct iwl4965_rx_phy_res *)
|
|
&priv->last_phy_res[1];
|
|
else
|
|
rx_start = NULL;
|
|
}
|
|
|
|
if (!rx_start) {
|
|
IWL_ERROR("MPDU frame without a PHY data\n");
|
|
return;
|
|
}
|
|
|
|
if (include_phy) {
|
|
header = (struct ieee80211_hdr *)((u8 *) & rx_start[1]
|
|
+ rx_start->cfg_phy_cnt);
|
|
|
|
len = le16_to_cpu(rx_start->byte_count);
|
|
rx_end = (__le32 *) (pkt->u.raw + rx_start->cfg_phy_cnt +
|
|
sizeof(struct iwl4965_rx_phy_res) + len);
|
|
} else {
|
|
struct iwl4965_rx_mpdu_res_start *amsdu =
|
|
(struct iwl4965_rx_mpdu_res_start *)pkt->u.raw;
|
|
|
|
header = (void *)(pkt->u.raw +
|
|
sizeof(struct iwl4965_rx_mpdu_res_start));
|
|
len = le16_to_cpu(amsdu->byte_count);
|
|
rx_end = (__le32 *) (pkt->u.raw +
|
|
sizeof(struct iwl4965_rx_mpdu_res_start) + len);
|
|
}
|
|
|
|
if (!(*rx_end & RX_RES_STATUS_NO_CRC32_ERROR) ||
|
|
!(*rx_end & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
|
|
IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n",
|
|
le32_to_cpu(*rx_end));
|
|
return;
|
|
}
|
|
|
|
priv->ucode_beacon_time = le32_to_cpu(rx_start->beacon_time_stamp);
|
|
|
|
stats.freq = ieee80211chan2mhz(stats.channel);
|
|
|
|
/* Find max signal strength (dBm) among 3 antenna/receiver chains */
|
|
stats.ssi = iwl4965_calc_rssi(rx_start);
|
|
|
|
/* Meaningful noise values are available only from beacon statistics,
|
|
* which are gathered only when associated, and indicate noise
|
|
* only for the associated network channel ...
|
|
* Ignore these noise values while scanning (other channels) */
|
|
if (iwl4965_is_associated(priv) &&
|
|
!test_bit(STATUS_SCANNING, &priv->status)) {
|
|
stats.noise = priv->last_rx_noise;
|
|
stats.signal = iwl4965_calc_sig_qual(stats.ssi, stats.noise);
|
|
} else {
|
|
stats.noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
|
|
stats.signal = iwl4965_calc_sig_qual(stats.ssi, 0);
|
|
}
|
|
|
|
/* Reset beacon noise level if not associated. */
|
|
if (!iwl4965_is_associated(priv))
|
|
priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE;
|
|
|
|
#ifdef CONFIG_IWL4965_DEBUG
|
|
/* TODO: Parts of iwl4965_report_frame are broken for 4965 */
|
|
if (iwl4965_debug_level & (IWL_DL_RX))
|
|
/* Set "1" to report good data frames in groups of 100 */
|
|
iwl4965_report_frame(priv, pkt, header, 1);
|
|
|
|
if (iwl4965_debug_level & (IWL_DL_RX | IWL_DL_STATS))
|
|
IWL_DEBUG_RX("Rssi %d, noise %d, qual %d, TSF %lu\n",
|
|
stats.ssi, stats.noise, stats.signal,
|
|
(long unsigned int)le64_to_cpu(rx_start->timestamp));
|
|
#endif
|
|
|
|
network_packet = iwl4965_is_network_packet(priv, header);
|
|
if (network_packet) {
|
|
priv->last_rx_rssi = stats.ssi;
|
|
priv->last_beacon_time = priv->ucode_beacon_time;
|
|
priv->last_tsf = le64_to_cpu(rx_start->timestamp);
|
|
}
|
|
|
|
fc = le16_to_cpu(header->frame_control);
|
|
switch (fc & IEEE80211_FCTL_FTYPE) {
|
|
case IEEE80211_FTYPE_MGMT:
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
|
|
iwl4965_update_ps_mode(priv, fc & IEEE80211_FCTL_PM,
|
|
header->addr2);
|
|
switch (fc & IEEE80211_FCTL_STYPE) {
|
|
case IEEE80211_STYPE_PROBE_RESP:
|
|
case IEEE80211_STYPE_BEACON:
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_STA &&
|
|
!compare_ether_addr(header->addr2, priv->bssid)) ||
|
|
(priv->iw_mode == IEEE80211_IF_TYPE_IBSS &&
|
|
!compare_ether_addr(header->addr3, priv->bssid))) {
|
|
struct ieee80211_mgmt *mgmt =
|
|
(struct ieee80211_mgmt *)header;
|
|
u64 timestamp =
|
|
le64_to_cpu(mgmt->u.beacon.timestamp);
|
|
|
|
priv->timestamp0 = timestamp & 0xFFFFFFFF;
|
|
priv->timestamp1 =
|
|
(timestamp >> 32) & 0xFFFFFFFF;
|
|
priv->beacon_int = le16_to_cpu(
|
|
mgmt->u.beacon.beacon_int);
|
|
if (priv->call_post_assoc_from_beacon &&
|
|
(priv->iw_mode == IEEE80211_IF_TYPE_STA)) {
|
|
priv->call_post_assoc_from_beacon = 0;
|
|
queue_work(priv->workqueue,
|
|
&priv->post_associate.work);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case IEEE80211_STYPE_ACTION:
|
|
break;
|
|
|
|
/*
|
|
* TODO: There is no callback function from upper
|
|
* stack to inform us when associated status. this
|
|
* work around to sniff assoc_resp management frame
|
|
* and finish the association process.
|
|
*/
|
|
case IEEE80211_STYPE_ASSOC_RESP:
|
|
case IEEE80211_STYPE_REASSOC_RESP:
|
|
if (network_packet) {
|
|
#ifdef CONFIG_IWL4965_HT
|
|
u8 *pos = NULL;
|
|
struct ieee802_11_elems elems;
|
|
#endif /*CONFIG_IWL4965_HT */
|
|
struct ieee80211_mgmt *mgnt =
|
|
(struct ieee80211_mgmt *)header;
|
|
|
|
/* We have just associated, give some
|
|
* time for the 4-way handshake if
|
|
* any. Don't start scan too early. */
|
|
priv->next_scan_jiffies = jiffies +
|
|
IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
|
|
|
|
priv->assoc_id = (~((1 << 15) | (1 << 14))
|
|
& le16_to_cpu(mgnt->u.assoc_resp.aid));
|
|
priv->assoc_capability =
|
|
le16_to_cpu(
|
|
mgnt->u.assoc_resp.capab_info);
|
|
#ifdef CONFIG_IWL4965_HT
|
|
pos = mgnt->u.assoc_resp.variable;
|
|
if (!parse_elems(pos,
|
|
len - (pos - (u8 *) mgnt),
|
|
&elems)) {
|
|
if (elems.ht_extra_param &&
|
|
elems.ht_cap_param)
|
|
break;
|
|
}
|
|
#endif /*CONFIG_IWL4965_HT */
|
|
/* assoc_id is 0 no association */
|
|
if (!priv->assoc_id)
|
|
break;
|
|
if (priv->beacon_int)
|
|
queue_work(priv->workqueue,
|
|
&priv->post_associate.work);
|
|
else
|
|
priv->call_post_assoc_from_beacon = 1;
|
|
}
|
|
|
|
break;
|
|
|
|
case IEEE80211_STYPE_PROBE_REQ:
|
|
if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) &&
|
|
!iwl4965_is_associated(priv)) {
|
|
DECLARE_MAC_BUF(mac1);
|
|
DECLARE_MAC_BUF(mac2);
|
|
DECLARE_MAC_BUF(mac3);
|
|
|
|
IWL_DEBUG_DROP("Dropping (non network): "
|
|
"%s, %s, %s\n",
|
|
print_mac(mac1, header->addr1),
|
|
print_mac(mac2, header->addr2),
|
|
print_mac(mac3, header->addr3));
|
|
return;
|
|
}
|
|
}
|
|
iwl4965_handle_data_packet(priv, 0, include_phy, rxb, &stats);
|
|
break;
|
|
|
|
case IEEE80211_FTYPE_CTL:
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
switch (fc & IEEE80211_FCTL_STYPE) {
|
|
case IEEE80211_STYPE_BACK_REQ:
|
|
IWL_DEBUG_HT("IEEE80211_STYPE_BACK_REQ arrived\n");
|
|
iwl4965_handle_data_packet(priv, 0, include_phy,
|
|
rxb, &stats);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
break;
|
|
|
|
case IEEE80211_FTYPE_DATA: {
|
|
DECLARE_MAC_BUF(mac1);
|
|
DECLARE_MAC_BUF(mac2);
|
|
DECLARE_MAC_BUF(mac3);
|
|
|
|
if (priv->iw_mode == IEEE80211_IF_TYPE_AP)
|
|
iwl4965_update_ps_mode(priv, fc & IEEE80211_FCTL_PM,
|
|
header->addr2);
|
|
|
|
if (unlikely(!network_packet))
|
|
IWL_DEBUG_DROP("Dropping (non network): "
|
|
"%s, %s, %s\n",
|
|
print_mac(mac1, header->addr1),
|
|
print_mac(mac2, header->addr2),
|
|
print_mac(mac3, header->addr3));
|
|
else if (unlikely(iwl4965_is_duplicate_packet(priv, header)))
|
|
IWL_DEBUG_DROP("Dropping (dup): %s, %s, %s\n",
|
|
print_mac(mac1, header->addr1),
|
|
print_mac(mac2, header->addr2),
|
|
print_mac(mac3, header->addr3));
|
|
else
|
|
iwl4965_handle_data_packet(priv, 1, include_phy, rxb,
|
|
&stats);
|
|
break;
|
|
}
|
|
default:
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
|
|
* This will be used later in iwl4965_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
|
|
static void iwl4965_rx_reply_rx_phy(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
priv->last_phy_res[0] = 1;
|
|
memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
|
|
sizeof(struct iwl4965_rx_phy_res));
|
|
}
|
|
|
|
static void iwl4965_rx_missed_beacon_notif(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
|
|
{
|
|
#ifdef CONFIG_IWL4965_SENSITIVITY
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_missed_beacon_notif *missed_beacon;
|
|
|
|
missed_beacon = &pkt->u.missed_beacon;
|
|
if (le32_to_cpu(missed_beacon->consequtive_missed_beacons) > 5) {
|
|
IWL_DEBUG_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n",
|
|
le32_to_cpu(missed_beacon->consequtive_missed_beacons),
|
|
le32_to_cpu(missed_beacon->total_missed_becons),
|
|
le32_to_cpu(missed_beacon->num_recvd_beacons),
|
|
le32_to_cpu(missed_beacon->num_expected_beacons));
|
|
priv->sensitivity_data.state = IWL_SENS_CALIB_NEED_REINIT;
|
|
if (unlikely(!test_bit(STATUS_SCANNING, &priv->status)))
|
|
queue_work(priv->workqueue, &priv->sensitivity_work);
|
|
}
|
|
#endif /*CONFIG_IWL4965_SENSITIVITY*/
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
|
|
/**
|
|
* iwl4965_set_tx_status - Update driver's record of one Tx frame's status
|
|
*
|
|
* This will get sent to mac80211.
|
|
*/
|
|
static void iwl4965_set_tx_status(struct iwl4965_priv *priv, int txq_id, int idx,
|
|
u32 status, u32 retry_count, u32 rate)
|
|
{
|
|
struct ieee80211_tx_status *tx_status =
|
|
&(priv->txq[txq_id].txb[idx].status);
|
|
|
|
tx_status->flags = status ? IEEE80211_TX_STATUS_ACK : 0;
|
|
tx_status->retry_count += retry_count;
|
|
tx_status->control.tx_rate = rate;
|
|
}
|
|
|
|
|
|
/**
|
|
* iwl4965_sta_modify_enable_tid_tx - Enable Tx for this TID in station table
|
|
*/
|
|
static void iwl4965_sta_modify_enable_tid_tx(struct iwl4965_priv *priv,
|
|
int sta_id, int tid)
|
|
{
|
|
unsigned long flags;
|
|
|
|
/* Remove "disable" flag, to enable Tx for this TID */
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX;
|
|
priv->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid));
|
|
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
|
|
iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
|
|
}
|
|
|
|
|
|
/**
|
|
* iwl4965_tx_status_reply_compressed_ba - Update tx status from block-ack
|
|
*
|
|
* Go through block-ack's bitmap of ACK'd frames, update driver's record of
|
|
* ACK vs. not. This gets sent to mac80211, then to rate scaling algo.
|
|
*/
|
|
static int iwl4965_tx_status_reply_compressed_ba(struct iwl4965_priv *priv,
|
|
struct iwl4965_ht_agg *agg,
|
|
struct iwl4965_compressed_ba_resp*
|
|
ba_resp)
|
|
|
|
{
|
|
int i, sh, ack;
|
|
u16 ba_seq_ctl = le16_to_cpu(ba_resp->ba_seq_ctl);
|
|
u32 bitmap0, bitmap1;
|
|
u32 resp_bitmap0 = le32_to_cpu(ba_resp->ba_bitmap0);
|
|
u32 resp_bitmap1 = le32_to_cpu(ba_resp->ba_bitmap1);
|
|
|
|
if (unlikely(!agg->wait_for_ba)) {
|
|
IWL_ERROR("Received BA when not expected\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Mark that the expected block-ack response arrived */
|
|
agg->wait_for_ba = 0;
|
|
IWL_DEBUG_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->ba_seq_ctl);
|
|
|
|
/* Calculate shift to align block-ack bits with our Tx window bits */
|
|
sh = agg->start_idx - SEQ_TO_INDEX(ba_seq_ctl>>4);
|
|
if (sh < 0) /* tbw something is wrong with indices */
|
|
sh += 0x100;
|
|
|
|
/* don't use 64-bit values for now */
|
|
bitmap0 = resp_bitmap0 >> sh;
|
|
bitmap1 = resp_bitmap1 >> sh;
|
|
bitmap0 |= (resp_bitmap1 & ((1<<sh)|((1<<sh)-1))) << (32 - sh);
|
|
|
|
if (agg->frame_count > (64 - sh)) {
|
|
IWL_DEBUG_TX_REPLY("more frames than bitmap size");
|
|
return -1;
|
|
}
|
|
|
|
/* check for success or failure according to the
|
|
* transmitted bitmap and block-ack bitmap */
|
|
bitmap0 &= agg->bitmap0;
|
|
bitmap1 &= agg->bitmap1;
|
|
|
|
/* For each frame attempted in aggregation,
|
|
* update driver's record of tx frame's status. */
|
|
for (i = 0; i < agg->frame_count ; i++) {
|
|
int idx = (agg->start_idx + i) & 0xff;
|
|
ack = bitmap0 & (1 << i);
|
|
IWL_DEBUG_TX_REPLY("%s ON i=%d idx=%d raw=%d\n",
|
|
ack? "ACK":"NACK", i, idx, agg->start_idx + i);
|
|
iwl4965_set_tx_status(priv, agg->txq_id, idx, ack, 0,
|
|
agg->rate_n_flags);
|
|
|
|
}
|
|
|
|
IWL_DEBUG_TX_REPLY("Bitmap %x%x\n", bitmap0, bitmap1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_queue_dec_wrap - Decrement queue index, wrap back to end if needed
|
|
* @index -- current index
|
|
* @n_bd -- total number of entries in queue (s/b power of 2)
|
|
*/
|
|
static inline int iwl4965_queue_dec_wrap(int index, int n_bd)
|
|
{
|
|
return (index == 0) ? n_bd - 1 : index - 1;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_rx_reply_compressed_ba - Handler for REPLY_COMPRESSED_BA
|
|
*
|
|
* Handles block-acknowledge notification from device, which reports success
|
|
* of frames sent via aggregation.
|
|
*/
|
|
static void iwl4965_rx_reply_compressed_ba(struct iwl4965_priv *priv,
|
|
struct iwl4965_rx_mem_buffer *rxb)
|
|
{
|
|
struct iwl4965_rx_packet *pkt = (void *)rxb->skb->data;
|
|
struct iwl4965_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
|
|
int index;
|
|
struct iwl4965_tx_queue *txq = NULL;
|
|
struct iwl4965_ht_agg *agg;
|
|
|
|
/* "flow" corresponds to Tx queue */
|
|
u16 ba_resp_scd_flow = le16_to_cpu(ba_resp->scd_flow);
|
|
|
|
/* "ssn" is start of block-ack Tx window, corresponds to index
|
|
* (in Tx queue's circular buffer) of first TFD/frame in window */
|
|
u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
|
|
|
|
if (ba_resp_scd_flow >= ARRAY_SIZE(priv->txq)) {
|
|
IWL_ERROR("BUG_ON scd_flow is bigger than number of queues");
|
|
return;
|
|
}
|
|
|
|
txq = &priv->txq[ba_resp_scd_flow];
|
|
agg = &priv->stations[ba_resp->sta_id].tid[ba_resp->tid].agg;
|
|
|
|
/* Find index just before block-ack window */
|
|
index = iwl4965_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);
|
|
|
|
/* TODO: Need to get this copy more safely - now good for debug */
|
|
/*
|
|
{
|
|
DECLARE_MAC_BUF(mac);
|
|
IWL_DEBUG_TX_REPLY("REPLY_COMPRESSED_BA [%d]Received from %s, "
|
|
"sta_id = %d\n",
|
|
agg->wait_for_ba,
|
|
print_mac(mac, (u8*) &ba_resp->sta_addr_lo32),
|
|
ba_resp->sta_id);
|
|
IWL_DEBUG_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%X%X, scd_flow = "
|
|
"%d, scd_ssn = %d\n",
|
|
ba_resp->tid,
|
|
ba_resp->ba_seq_ctl,
|
|
ba_resp->ba_bitmap1,
|
|
ba_resp->ba_bitmap0,
|
|
ba_resp->scd_flow,
|
|
ba_resp->scd_ssn);
|
|
IWL_DEBUG_TX_REPLY("DAT start_idx = %d, bitmap = 0x%X%X \n",
|
|
agg->start_idx,
|
|
agg->bitmap1,
|
|
agg->bitmap0);
|
|
}
|
|
*/
|
|
|
|
/* Update driver's record of ACK vs. not for each frame in window */
|
|
iwl4965_tx_status_reply_compressed_ba(priv, agg, ba_resp);
|
|
|
|
/* Release all TFDs before the SSN, i.e. all TFDs in front of
|
|
* block-ack window (we assume that they've been successfully
|
|
* transmitted ... if not, it's too late anyway). */
|
|
if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff))
|
|
iwl4965_tx_queue_reclaim(priv, ba_resp_scd_flow, index);
|
|
|
|
}
|
|
|
|
|
|
/**
|
|
* iwl4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
|
|
*/
|
|
static void iwl4965_tx_queue_stop_scheduler(struct iwl4965_priv *priv, u16 txq_id)
|
|
{
|
|
/* Simply stop the queue, but don't change any configuration;
|
|
* the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
|
|
iwl4965_write_prph(priv,
|
|
KDR_SCD_QUEUE_STATUS_BITS(txq_id),
|
|
(0 << SCD_QUEUE_STTS_REG_POS_ACTIVE)|
|
|
(1 << SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
|
|
*/
|
|
static int iwl4965_tx_queue_set_q2ratid(struct iwl4965_priv *priv, u16 ra_tid,
|
|
u16 txq_id)
|
|
{
|
|
u32 tbl_dw_addr;
|
|
u32 tbl_dw;
|
|
u16 scd_q2ratid;
|
|
|
|
scd_q2ratid = ra_tid & SCD_QUEUE_RA_TID_MAP_RATID_MSK;
|
|
|
|
tbl_dw_addr = priv->scd_base_addr +
|
|
SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);
|
|
|
|
tbl_dw = iwl4965_read_targ_mem(priv, tbl_dw_addr);
|
|
|
|
if (txq_id & 0x1)
|
|
tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
|
|
else
|
|
tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);
|
|
|
|
iwl4965_write_targ_mem(priv, tbl_dw_addr, tbl_dw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* iwl4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
|
|
*
|
|
* NOTE: txq_id must be greater than IWL_BACK_QUEUE_FIRST_ID,
|
|
* i.e. it must be one of the higher queues used for aggregation
|
|
*/
|
|
static int iwl4965_tx_queue_agg_enable(struct iwl4965_priv *priv, int txq_id,
|
|
int tx_fifo, int sta_id, int tid,
|
|
u16 ssn_idx)
|
|
{
|
|
unsigned long flags;
|
|
int rc;
|
|
u16 ra_tid;
|
|
|
|
if (IWL_BACK_QUEUE_FIRST_ID > txq_id)
|
|
IWL_WARNING("queue number too small: %d, must be > %d\n",
|
|
txq_id, IWL_BACK_QUEUE_FIRST_ID);
|
|
|
|
ra_tid = BUILD_RAxTID(sta_id, tid);
|
|
|
|
/* Modify device's station table to Tx this TID */
|
|
iwl4965_sta_modify_enable_tid_tx(priv, sta_id, tid);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/* Stop this Tx queue before configuring it */
|
|
iwl4965_tx_queue_stop_scheduler(priv, txq_id);
|
|
|
|
/* Map receiver-address / traffic-ID to this queue */
|
|
iwl4965_tx_queue_set_q2ratid(priv, ra_tid, txq_id);
|
|
|
|
/* Set this queue as a chain-building queue */
|
|
iwl4965_set_bits_prph(priv, KDR_SCD_QUEUECHAIN_SEL, (1<<txq_id));
|
|
|
|
/* Place first TFD at index corresponding to start sequence number.
|
|
* Assumes that ssn_idx is valid (!= 0xFFF) */
|
|
priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
|
|
priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
|
|
iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
|
|
|
|
/* Set up Tx window size and frame limit for this queue */
|
|
iwl4965_write_targ_mem(priv,
|
|
priv->scd_base_addr + SCD_CONTEXT_QUEUE_OFFSET(txq_id),
|
|
(SCD_WIN_SIZE << SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
|
|
SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
|
|
|
|
iwl4965_write_targ_mem(priv, priv->scd_base_addr +
|
|
SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
|
|
(SCD_FRAME_LIMIT << SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS)
|
|
& SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
|
|
|
|
iwl4965_set_bits_prph(priv, KDR_SCD_INTERRUPT_MASK, (1 << txq_id));
|
|
|
|
/* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
|
|
iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 1);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* txq_id must be greater than IWL_BACK_QUEUE_FIRST_ID
|
|
*/
|
|
static int iwl4965_tx_queue_agg_disable(struct iwl4965_priv *priv, u16 txq_id,
|
|
u16 ssn_idx, u8 tx_fifo)
|
|
{
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
if (IWL_BACK_QUEUE_FIRST_ID > txq_id) {
|
|
IWL_WARNING("queue number too small: %d, must be > %d\n",
|
|
txq_id, IWL_BACK_QUEUE_FIRST_ID);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
rc = iwl4965_grab_nic_access(priv);
|
|
if (rc) {
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
iwl4965_tx_queue_stop_scheduler(priv, txq_id);
|
|
|
|
iwl4965_clear_bits_prph(priv, KDR_SCD_QUEUECHAIN_SEL, (1 << txq_id));
|
|
|
|
priv->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
|
|
priv->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
|
|
/* supposes that ssn_idx is valid (!= 0xFFF) */
|
|
iwl4965_set_wr_ptrs(priv, txq_id, ssn_idx);
|
|
|
|
iwl4965_clear_bits_prph(priv, KDR_SCD_INTERRUPT_MASK, (1 << txq_id));
|
|
iwl4965_txq_ctx_deactivate(priv, txq_id);
|
|
iwl4965_tx_queue_set_status(priv, &priv->txq[txq_id], tx_fifo, 0);
|
|
|
|
iwl4965_release_nic_access(priv);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif/* CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
/**
|
|
* iwl4965_add_station - Initialize a station's hardware rate table
|
|
*
|
|
* The uCode's station table contains a table of fallback rates
|
|
* for automatic fallback during transmission.
|
|
*
|
|
* NOTE: This sets up a default set of values. These will be replaced later
|
|
* if the driver's iwl-4965-rs rate scaling algorithm is used, instead of
|
|
* rc80211_simple.
|
|
*
|
|
* NOTE: Run REPLY_ADD_STA command to set up station table entry, before
|
|
* calling this function (which runs REPLY_TX_LINK_QUALITY_CMD,
|
|
* which requires station table entry to exist).
|
|
*/
|
|
void iwl4965_add_station(struct iwl4965_priv *priv, const u8 *addr, int is_ap)
|
|
{
|
|
int i, r;
|
|
struct iwl4965_link_quality_cmd link_cmd = {
|
|
.reserved1 = 0,
|
|
};
|
|
u16 rate_flags;
|
|
|
|
/* Set up the rate scaling to start at selected rate, fall back
|
|
* all the way down to 1M in IEEE order, and then spin on 1M */
|
|
if (is_ap)
|
|
r = IWL_RATE_54M_INDEX;
|
|
else if (priv->phymode == MODE_IEEE80211A)
|
|
r = IWL_RATE_6M_INDEX;
|
|
else
|
|
r = IWL_RATE_1M_INDEX;
|
|
|
|
for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
|
|
rate_flags = 0;
|
|
if (r >= IWL_FIRST_CCK_RATE && r <= IWL_LAST_CCK_RATE)
|
|
rate_flags |= RATE_MCS_CCK_MSK;
|
|
|
|
/* Use Tx antenna B only */
|
|
rate_flags |= RATE_MCS_ANT_B_MSK;
|
|
rate_flags &= ~RATE_MCS_ANT_A_MSK;
|
|
|
|
link_cmd.rs_table[i].rate_n_flags =
|
|
iwl4965_hw_set_rate_n_flags(iwl4965_rates[r].plcp, rate_flags);
|
|
r = iwl4965_get_prev_ieee_rate(r);
|
|
}
|
|
|
|
link_cmd.general_params.single_stream_ant_msk = 2;
|
|
link_cmd.general_params.dual_stream_ant_msk = 3;
|
|
link_cmd.agg_params.agg_dis_start_th = 3;
|
|
link_cmd.agg_params.agg_time_limit = cpu_to_le16(4000);
|
|
|
|
/* Update the rate scaling for control frame Tx to AP */
|
|
link_cmd.sta_id = is_ap ? IWL_AP_ID : IWL4965_BROADCAST_ID;
|
|
|
|
iwl4965_send_cmd_pdu(priv, REPLY_TX_LINK_QUALITY_CMD, sizeof(link_cmd),
|
|
&link_cmd);
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
|
|
static u8 iwl4965_is_channel_extension(struct iwl4965_priv *priv, int phymode,
|
|
u16 channel, u8 extension_chan_offset)
|
|
{
|
|
const struct iwl4965_channel_info *ch_info;
|
|
|
|
ch_info = iwl4965_get_channel_info(priv, phymode, channel);
|
|
if (!is_channel_valid(ch_info))
|
|
return 0;
|
|
|
|
if (extension_chan_offset == IWL_EXT_CHANNEL_OFFSET_AUTO)
|
|
return 0;
|
|
|
|
if ((ch_info->fat_extension_channel == extension_chan_offset) ||
|
|
(ch_info->fat_extension_channel == HT_IE_EXT_CHANNEL_MAX))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 iwl4965_is_fat_tx_allowed(struct iwl4965_priv *priv,
|
|
struct ieee80211_ht_info *sta_ht_inf)
|
|
{
|
|
struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
|
|
|
|
if ((!iwl_ht_conf->is_ht) ||
|
|
(iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
|
|
(iwl_ht_conf->extension_chan_offset == IWL_EXT_CHANNEL_OFFSET_AUTO))
|
|
return 0;
|
|
|
|
if (sta_ht_inf) {
|
|
if ((!sta_ht_inf->ht_supported) ||
|
|
(!sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH))
|
|
return 0;
|
|
}
|
|
|
|
return (iwl4965_is_channel_extension(priv, priv->phymode,
|
|
iwl_ht_conf->control_channel,
|
|
iwl_ht_conf->extension_chan_offset));
|
|
}
|
|
|
|
void iwl4965_set_rxon_ht(struct iwl4965_priv *priv, struct iwl_ht_info *ht_info)
|
|
{
|
|
struct iwl4965_rxon_cmd *rxon = &priv->staging_rxon;
|
|
u32 val;
|
|
|
|
if (!ht_info->is_ht)
|
|
return;
|
|
|
|
/* Set up channel bandwidth: 20 MHz only, or 20/40 mixed if fat ok */
|
|
if (iwl4965_is_fat_tx_allowed(priv, NULL))
|
|
rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
|
|
else
|
|
rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
|
|
RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
|
|
|
|
if (le16_to_cpu(rxon->channel) != ht_info->control_channel) {
|
|
IWL_DEBUG_ASSOC("control diff than current %d %d\n",
|
|
le16_to_cpu(rxon->channel),
|
|
ht_info->control_channel);
|
|
rxon->channel = cpu_to_le16(ht_info->control_channel);
|
|
return;
|
|
}
|
|
|
|
/* Note: control channel is opposite of extension channel */
|
|
switch (ht_info->extension_chan_offset) {
|
|
case IWL_EXT_CHANNEL_OFFSET_ABOVE:
|
|
rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
|
|
break;
|
|
case IWL_EXT_CHANNEL_OFFSET_BELOW:
|
|
rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
|
|
break;
|
|
case IWL_EXT_CHANNEL_OFFSET_AUTO:
|
|
rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
|
|
break;
|
|
default:
|
|
rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
|
|
break;
|
|
}
|
|
|
|
val = ht_info->ht_protection;
|
|
|
|
rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
|
|
|
|
iwl4965_set_rxon_chain(priv);
|
|
|
|
IWL_DEBUG_ASSOC("supported HT rate 0x%X %X "
|
|
"rxon flags 0x%X operation mode :0x%X "
|
|
"extension channel offset 0x%x "
|
|
"control chan %d\n",
|
|
ht_info->supp_mcs_set[0], ht_info->supp_mcs_set[1],
|
|
le32_to_cpu(rxon->flags), ht_info->ht_protection,
|
|
ht_info->extension_chan_offset,
|
|
ht_info->control_channel);
|
|
return;
|
|
}
|
|
|
|
void iwl4965_set_ht_add_station(struct iwl4965_priv *priv, u8 index,
|
|
struct ieee80211_ht_info *sta_ht_inf)
|
|
{
|
|
__le32 sta_flags;
|
|
|
|
if (!sta_ht_inf || !sta_ht_inf->ht_supported)
|
|
goto done;
|
|
|
|
sta_flags = priv->stations[index].sta.station_flags;
|
|
|
|
if (((sta_ht_inf->cap & IEEE80211_HT_CAP_MIMO_PS >> 2))
|
|
== IWL_MIMO_PS_DYNAMIC)
|
|
sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK;
|
|
else
|
|
sta_flags &= ~STA_FLG_RTS_MIMO_PROT_MSK;
|
|
|
|
sta_flags |= cpu_to_le32(
|
|
(u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS);
|
|
|
|
sta_flags |= cpu_to_le32(
|
|
(u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS);
|
|
|
|
if (iwl4965_is_fat_tx_allowed(priv, sta_ht_inf))
|
|
sta_flags |= STA_FLG_FAT_EN_MSK;
|
|
else
|
|
sta_flags &= (~STA_FLG_FAT_EN_MSK);
|
|
|
|
priv->stations[index].sta.station_flags = sta_flags;
|
|
done:
|
|
return;
|
|
}
|
|
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
|
|
static void iwl4965_sta_modify_add_ba_tid(struct iwl4965_priv *priv,
|
|
int sta_id, int tid, u16 ssn)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
priv->stations[sta_id].sta.station_flags_msk = 0;
|
|
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK;
|
|
priv->stations[sta_id].sta.add_immediate_ba_tid = (u8)tid;
|
|
priv->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn);
|
|
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
|
|
iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
|
|
}
|
|
|
|
static void iwl4965_sta_modify_del_ba_tid(struct iwl4965_priv *priv,
|
|
int sta_id, int tid)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
priv->stations[sta_id].sta.station_flags_msk = 0;
|
|
priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK;
|
|
priv->stations[sta_id].sta.remove_immediate_ba_tid = (u8)tid;
|
|
priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
|
|
iwl4965_send_add_station(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
|
|
}
|
|
|
|
static const u16 default_tid_to_tx_fifo[] = {
|
|
IWL_TX_FIFO_AC1,
|
|
IWL_TX_FIFO_AC0,
|
|
IWL_TX_FIFO_AC0,
|
|
IWL_TX_FIFO_AC1,
|
|
IWL_TX_FIFO_AC2,
|
|
IWL_TX_FIFO_AC2,
|
|
IWL_TX_FIFO_AC3,
|
|
IWL_TX_FIFO_AC3,
|
|
IWL_TX_FIFO_NONE,
|
|
IWL_TX_FIFO_NONE,
|
|
IWL_TX_FIFO_NONE,
|
|
IWL_TX_FIFO_NONE,
|
|
IWL_TX_FIFO_NONE,
|
|
IWL_TX_FIFO_NONE,
|
|
IWL_TX_FIFO_NONE,
|
|
IWL_TX_FIFO_NONE,
|
|
IWL_TX_FIFO_AC3
|
|
};
|
|
|
|
/*
|
|
* Find first available (lowest unused) Tx Queue, mark it "active".
|
|
* Called only when finding queue for aggregation.
|
|
* Should never return anything < 7, because they should already
|
|
* be in use as EDCA AC (0-3), Command (4), HCCA (5, 6).
|
|
*/
|
|
static int iwl4965_txq_ctx_activate_free(struct iwl4965_priv *priv)
|
|
{
|
|
int txq_id;
|
|
|
|
for (txq_id = 0; txq_id < priv->hw_setting.max_txq_num; txq_id++)
|
|
if (!test_and_set_bit(txq_id, &priv->txq_ctx_active_msk))
|
|
return txq_id;
|
|
return -1;
|
|
}
|
|
|
|
int iwl4965_mac_ht_tx_agg_start(struct ieee80211_hw *hw, u8 *da, u16 tid,
|
|
u16 *start_seq_num)
|
|
{
|
|
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
int sta_id;
|
|
int tx_fifo;
|
|
int txq_id;
|
|
int ssn = -1;
|
|
unsigned long flags;
|
|
struct iwl4965_tid_data *tid_data;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
/* Determine Tx DMA/FIFO channel for this Traffic ID */
|
|
if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo)))
|
|
tx_fifo = default_tid_to_tx_fifo[tid];
|
|
else
|
|
return -EINVAL;
|
|
|
|
IWL_WARNING("iwl-AGG iwl4965_mac_ht_tx_agg_start on da=%s"
|
|
" tid=%d\n", print_mac(mac, da), tid);
|
|
|
|
/* Get index into station table */
|
|
sta_id = iwl4965_hw_find_station(priv, da);
|
|
if (sta_id == IWL_INVALID_STATION)
|
|
return -ENXIO;
|
|
|
|
/* Find available Tx queue for aggregation */
|
|
txq_id = iwl4965_txq_ctx_activate_free(priv);
|
|
if (txq_id == -1)
|
|
return -ENXIO;
|
|
|
|
spin_lock_irqsave(&priv->sta_lock, flags);
|
|
tid_data = &priv->stations[sta_id].tid[tid];
|
|
|
|
/* Get starting sequence number for 1st frame in block ack window.
|
|
* We'll use least signif byte as 1st frame's index into Tx queue. */
|
|
ssn = SEQ_TO_SN(tid_data->seq_number);
|
|
tid_data->agg.txq_id = txq_id;
|
|
spin_unlock_irqrestore(&priv->sta_lock, flags);
|
|
|
|
*start_seq_num = ssn;
|
|
|
|
/* Update driver's link quality manager */
|
|
iwl4965_ba_status(priv, tid, BA_STATUS_ACTIVE);
|
|
|
|
/* Set up and enable aggregation for selected Tx queue and FIFO */
|
|
return iwl4965_tx_queue_agg_enable(priv, txq_id, tx_fifo,
|
|
sta_id, tid, ssn);
|
|
}
|
|
|
|
|
|
int iwl4965_mac_ht_tx_agg_stop(struct ieee80211_hw *hw, u8 *da, u16 tid,
|
|
int generator)
|
|
{
|
|
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
int tx_fifo_id, txq_id, sta_id, ssn = -1;
|
|
struct iwl4965_tid_data *tid_data;
|
|
int rc;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
if (!da) {
|
|
IWL_ERROR("%s: da = NULL\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (likely(tid < ARRAY_SIZE(default_tid_to_tx_fifo)))
|
|
tx_fifo_id = default_tid_to_tx_fifo[tid];
|
|
else
|
|
return -EINVAL;
|
|
|
|
sta_id = iwl4965_hw_find_station(priv, da);
|
|
|
|
if (sta_id == IWL_INVALID_STATION)
|
|
return -ENXIO;
|
|
|
|
tid_data = &priv->stations[sta_id].tid[tid];
|
|
ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
|
|
txq_id = tid_data->agg.txq_id;
|
|
|
|
rc = iwl4965_tx_queue_agg_disable(priv, txq_id, ssn, tx_fifo_id);
|
|
/* FIXME: need more safe way to handle error condition */
|
|
if (rc)
|
|
return rc;
|
|
|
|
iwl4965_ba_status(priv, tid, BA_STATUS_INITIATOR_DELBA);
|
|
IWL_DEBUG_INFO("iwl4965_mac_ht_tx_agg_stop on da=%s tid=%d\n",
|
|
print_mac(mac, da), tid);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int iwl4965_mac_ht_rx_agg_start(struct ieee80211_hw *hw, u8 *da,
|
|
u16 tid, u16 start_seq_num)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
int sta_id;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
IWL_WARNING("iwl-AGG iwl4965_mac_ht_rx_agg_start on da=%s"
|
|
" tid=%d\n", print_mac(mac, da), tid);
|
|
sta_id = iwl4965_hw_find_station(priv, da);
|
|
iwl4965_sta_modify_add_ba_tid(priv, sta_id, tid, start_seq_num);
|
|
return 0;
|
|
}
|
|
|
|
int iwl4965_mac_ht_rx_agg_stop(struct ieee80211_hw *hw, u8 *da,
|
|
u16 tid, int generator)
|
|
{
|
|
struct iwl4965_priv *priv = hw->priv;
|
|
int sta_id;
|
|
DECLARE_MAC_BUF(mac);
|
|
|
|
IWL_WARNING("iwl-AGG iwl4965_mac_ht_rx_agg_stop on da=%s tid=%d\n",
|
|
print_mac(mac, da), tid);
|
|
sta_id = iwl4965_hw_find_station(priv, da);
|
|
iwl4965_sta_modify_del_ba_tid(priv, sta_id, tid);
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
|
|
/* Set up 4965-specific Rx frame reply handlers */
|
|
void iwl4965_hw_rx_handler_setup(struct iwl4965_priv *priv)
|
|
{
|
|
/* Legacy Rx frames */
|
|
priv->rx_handlers[REPLY_4965_RX] = iwl4965_rx_reply_rx;
|
|
|
|
/* High-throughput (HT) Rx frames */
|
|
priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy;
|
|
priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx;
|
|
|
|
priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
|
|
iwl4965_rx_missed_beacon_notif;
|
|
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
priv->rx_handlers[REPLY_COMPRESSED_BA] = iwl4965_rx_reply_compressed_ba;
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
}
|
|
|
|
void iwl4965_hw_setup_deferred_work(struct iwl4965_priv *priv)
|
|
{
|
|
INIT_WORK(&priv->txpower_work, iwl4965_bg_txpower_work);
|
|
INIT_WORK(&priv->statistics_work, iwl4965_bg_statistics_work);
|
|
#ifdef CONFIG_IWL4965_SENSITIVITY
|
|
INIT_WORK(&priv->sensitivity_work, iwl4965_bg_sensitivity_work);
|
|
#endif
|
|
#ifdef CONFIG_IWL4965_HT
|
|
#ifdef CONFIG_IWL4965_HT_AGG
|
|
INIT_WORK(&priv->agg_work, iwl4965_bg_agg_work);
|
|
#endif /* CONFIG_IWL4965_HT_AGG */
|
|
#endif /* CONFIG_IWL4965_HT */
|
|
init_timer(&priv->statistics_periodic);
|
|
priv->statistics_periodic.data = (unsigned long)priv;
|
|
priv->statistics_periodic.function = iwl4965_bg_statistics_periodic;
|
|
}
|
|
|
|
void iwl4965_hw_cancel_deferred_work(struct iwl4965_priv *priv)
|
|
{
|
|
del_timer_sync(&priv->statistics_periodic);
|
|
|
|
cancel_delayed_work(&priv->init_alive_start);
|
|
}
|
|
|
|
struct pci_device_id iwl4965_hw_card_ids[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4229)},
|
|
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x4230)},
|
|
{0}
|
|
};
|
|
|
|
/*
|
|
* The device's EEPROM semaphore prevents conflicts between driver and uCode
|
|
* when accessing the EEPROM; each access is a series of pulses to/from the
|
|
* EEPROM chip, not a single event, so even reads could conflict if they
|
|
* weren't arbitrated by the semaphore.
|
|
*/
|
|
int iwl4965_eeprom_acquire_semaphore(struct iwl4965_priv *priv)
|
|
{
|
|
u16 count;
|
|
int rc;
|
|
|
|
for (count = 0; count < EEPROM_SEM_RETRY_LIMIT; count++) {
|
|
/* Request semaphore */
|
|
iwl4965_set_bit(priv, CSR_HW_IF_CONFIG_REG,
|
|
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
|
|
|
|
/* See if we got it */
|
|
rc = iwl4965_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
|
|
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
|
|
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
|
|
EEPROM_SEM_TIMEOUT);
|
|
if (rc >= 0) {
|
|
IWL_DEBUG_IO("Acquired semaphore after %d tries.\n",
|
|
count+1);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
inline void iwl4965_eeprom_release_semaphore(struct iwl4965_priv *priv)
|
|
{
|
|
iwl4965_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
|
|
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
|
|
}
|
|
|
|
|
|
MODULE_DEVICE_TABLE(pci, iwl4965_hw_card_ids);
|