asgardius/android_kernel_motorola_sm6225
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_motorola_sm6225/drivers/scsi/pcmcia/nsp_cs.h
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

470 lines
14 KiB
C
Raw Blame History

/*=======================================================/
Header file for nsp_cs.c
By: YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
Ver.1.0 : Cut unused lines.
Ver 0.1 : Initial version.
This software may be used and distributed according to the terms of
the GNU General Public License.
=========================================================*/
/* $Id: nsp_cs.h,v 1.19 2003/08/18 11:09:19 elca Exp $ */
#ifndef __nsp_cs__
#define __nsp_cs__
/* for debugging */
//#define NSP_DEBUG 9
/*
#define static
#define inline
*/
/************************************
* Some useful macros...
*/
#define BIT(x) (1L << (x))
/* SCSI initiator must be ID 7 */
#define NSP_INITIATOR_ID 7
#define NSP_SELTIMEOUT 200
/***************************************************************************
* register definitions
***************************************************************************/
/*========================================================================
* base register
========================================================================*/
#define IRQCONTROL 0x00 /* R */
# define IRQCONTROL_RESELECT_CLEAR BIT(0)
# define IRQCONTROL_PHASE_CHANGE_CLEAR BIT(1)
# define IRQCONTROL_TIMER_CLEAR BIT(2)
# define IRQCONTROL_FIFO_CLEAR BIT(3)
# define IRQCONTROL_ALLMASK 0xff
# define IRQCONTROL_ALLCLEAR (IRQCONTROL_RESELECT_CLEAR | \
IRQCONTROL_PHASE_CHANGE_CLEAR | \
IRQCONTROL_TIMER_CLEAR | \
IRQCONTROL_FIFO_CLEAR )
# define IRQCONTROL_IRQDISABLE 0xf0
#define IRQSTATUS 0x00 /* W */
# define IRQSTATUS_SCSI BIT(0)
# define IRQSTATUS_TIMER BIT(2)
# define IRQSTATUS_FIFO BIT(3)
# define IRQSTATUS_MASK 0x0f
#define IFSELECT 0x01 /* W */
# define IF_IFSEL BIT(0)
# define IF_REGSEL BIT(2)
#define FIFOSTATUS 0x01 /* R */
# define FIFOSTATUS_CHIP_REVISION_MASK 0x0f
# define FIFOSTATUS_CHIP_ID_MASK 0x70
# define FIFOSTATUS_FULL_EMPTY BIT(7)
#define INDEXREG 0x02 /* R/W */
#define DATAREG 0x03 /* R/W */
#define FIFODATA 0x04 /* R/W */
#define FIFODATA1 0x05 /* R/W */
#define FIFODATA2 0x06 /* R/W */
#define FIFODATA3 0x07 /* R/W */
/*====================================================================
* indexed register
====================================================================*/
#define EXTBUSCTRL 0x10 /* R/W,deleted */
#define CLOCKDIV 0x11 /* R/W */
# define CLOCK_40M 0x02
# define CLOCK_20M 0x01
# define FAST_20 BIT(2)
#define TERMPWRCTRL 0x13 /* R/W */
# define POWER_ON BIT(0)
#define SCSIIRQMODE 0x15 /* R/W */
# define SCSI_PHASE_CHANGE_EI BIT(0)
# define RESELECT_EI BIT(4)
# define FIFO_IRQ_EI BIT(5)
# define SCSI_RESET_IRQ_EI BIT(6)
#define IRQPHASESENCE 0x16 /* R */
# define LATCHED_MSG BIT(0)
# define LATCHED_IO BIT(1)
# define LATCHED_CD BIT(2)
# define LATCHED_BUS_FREE BIT(3)
# define PHASE_CHANGE_IRQ BIT(4)
# define RESELECT_IRQ BIT(5)
# define FIFO_IRQ BIT(6)
# define SCSI_RESET_IRQ BIT(7)
#define TIMERCOUNT 0x17 /* R/W */
#define SCSIBUSCTRL 0x18 /* R/W */
# define SCSI_SEL BIT(0)
# define SCSI_RST BIT(1)
# define SCSI_DATAOUT_ENB BIT(2)
# define SCSI_ATN BIT(3)
# define SCSI_ACK BIT(4)
# define SCSI_BSY BIT(5)
# define AUTODIRECTION BIT(6)
# define ACKENB BIT(7)
#define SCSIBUSMON 0x19 /* R */
#define SETARBIT 0x1A /* W */
# define ARBIT_GO BIT(0)
# define ARBIT_FLAG_CLEAR BIT(1)
#define ARBITSTATUS 0x1A /* R */
/*# define ARBIT_GO BIT(0)*/
# define ARBIT_WIN BIT(1)
# define ARBIT_FAIL BIT(2)
# define RESELECT_FLAG BIT(3)
#define PARITYCTRL 0x1B /* W */
#define PARITYSTATUS 0x1B /* R */
#define COMMANDCTRL 0x1C /* W */
# define CLEAR_COMMAND_POINTER BIT(0)
# define AUTO_COMMAND_GO BIT(1)
#define RESELECTID 0x1C /* R */
#define COMMANDDATA 0x1D /* R/W */
#define POINTERCLR 0x1E /* W */
# define POINTER_CLEAR BIT(0)
# define ACK_COUNTER_CLEAR BIT(1)
# define REQ_COUNTER_CLEAR BIT(2)
# define HOST_COUNTER_CLEAR BIT(3)
# define READ_SOURCE (BIT(4) | BIT(5))
# define ACK_COUNTER (0)
# define REQ_COUNTER (BIT(4))
# define HOST_COUNTER (BIT(5))
#define TRANSFERCOUNT 0x1E /* R */
#define TRANSFERMODE 0x20 /* R/W */
# define MODE_MEM8 BIT(0)
# define MODE_MEM32 BIT(1)
# define MODE_ADR24 BIT(2)
# define MODE_ADR32 BIT(3)
# define MODE_IO8 BIT(4)
# define MODE_IO32 BIT(5)
# define TRANSFER_GO BIT(6)
# define BRAIND BIT(7)
#define SYNCREG 0x21 /* R/W */
# define SYNCREG_OFFSET_MASK 0x0f
# define SYNCREG_PERIOD_MASK 0xf0
# define SYNCREG_PERIOD_SHIFT 4
#define SCSIDATALATCH 0x22 /* W */
#define SCSIDATAIN 0x22 /* R */
#define SCSIDATAWITHACK 0x23 /* R/W */
#define SCAMCONTROL 0x24 /* W */
#define SCAMSTATUS 0x24 /* R */
#define SCAMDATA 0x25 /* R/W */
#define OTHERCONTROL 0x26 /* R/W */
# define TPL_ROM_WRITE_EN BIT(0)
# define TPWR_OUT BIT(1)
# define TPWR_SENSE BIT(2)
# define RA8_CONTROL BIT(3)
#define ACKWIDTH 0x27 /* R/W */
#define CLRTESTPNT 0x28 /* W */
#define ACKCNTLD 0x29 /* W */
#define REQCNTLD 0x2A /* W */
#define HSTCNTLD 0x2B /* W */
#define CHECKSUM 0x2C /* R/W */
/************************************************************************
* Input status bit definitions.
************************************************************************/
#define S_MESSAGE BIT(0) /* Message line from SCSI bus */
#define S_IO BIT(1) /* Input/Output line from SCSI bus */
#define S_CD BIT(2) /* Command/Data line from SCSI bus */
#define S_BUSY BIT(3) /* Busy line from SCSI bus */
#define S_ACK BIT(4) /* Acknowlege line from SCSI bus */
#define S_REQUEST BIT(5) /* Request line from SCSI bus */
#define S_SELECT BIT(6) /* */
#define S_ATN BIT(7) /* */
/***********************************************************************
* Useful Bus Monitor status combinations.
***********************************************************************/
#define BUSMON_SEL S_SELECT
#define BUSMON_BSY S_BUSY
#define BUSMON_REQ S_REQUEST
#define BUSMON_IO S_IO
#define BUSMON_ACK S_ACK
#define BUSMON_BUS_FREE 0
#define BUSMON_COMMAND ( S_BUSY | S_CD | S_REQUEST )
#define BUSMON_MESSAGE_IN ( S_BUSY | S_CD | S_IO | S_MESSAGE | S_REQUEST )
#define BUSMON_MESSAGE_OUT ( S_BUSY | S_CD | S_MESSAGE | S_REQUEST )
#define BUSMON_DATA_IN ( S_BUSY | S_IO | S_REQUEST )
#define BUSMON_DATA_OUT ( S_BUSY | S_REQUEST )
#define BUSMON_STATUS ( S_BUSY | S_CD | S_IO | S_REQUEST )
#define BUSMON_SELECT ( S_IO | S_SELECT )
#define BUSMON_RESELECT ( S_IO | S_SELECT )
#define BUSMON_PHASE_MASK ( S_CD | S_IO | S_MESSAGE | S_SELECT )
#define BUSPHASE_SELECT ( BUSMON_SELECT & BUSMON_PHASE_MASK )
#define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK )
#define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK )
#define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK )
#define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK )
#define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK )
#define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK )
/*====================================================================*/
typedef struct scsi_info_t {
struct pcmcia_device *p_dev;
struct Scsi_Host *host;
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,74))
dev_node_t node;
#else
int ndev;
dev_node_t node[8];
struct bus_operations *bus;
#endif
int stop;
} scsi_info_t;
/* synchronous transfer negotiation data */
typedef struct _sync_data {
unsigned int SyncNegotiation;
#define SYNC_NOT_YET 0
#define SYNC_OK 1
#define SYNC_NG 2
unsigned int SyncPeriod;
unsigned int SyncOffset;
unsigned char SyncRegister;
unsigned char AckWidth;
} sync_data;
typedef struct _nsp_hw_data {
unsigned int BaseAddress;
unsigned int NumAddress;
unsigned int IrqNumber;
unsigned long MmioAddress;
#define NSP_MMIO_OFFSET 0x0800
unsigned long MmioLength;
unsigned char ScsiClockDiv;
unsigned char TransferMode;
int TimerCount;
int SelectionTimeOut;
Scsi_Cmnd *CurrentSC;
//int CurrnetTarget;
int FifoCount;
#define MSGBUF_SIZE 20
unsigned char MsgBuffer[MSGBUF_SIZE];
int MsgLen;
#define N_TARGET 8
sync_data Sync[N_TARGET];
char nspinfo[110]; /* description */
spinlock_t Lock;
scsi_info_t *ScsiInfo; /* attach <-> detect glue */
#ifdef NSP_DEBUG
int CmdId; /* Accepted command serial number.
Used for debugging. */
#endif
} nsp_hw_data;
/****************************************************************************
*
*/
/* Card service functions */
static void nsp_cs_detach (struct pcmcia_device *p_dev);
static void nsp_cs_release(struct pcmcia_device *link);
static int nsp_cs_config (struct pcmcia_device *link);
/* Linux SCSI subsystem specific functions */
static struct Scsi_Host *nsp_detect (struct scsi_host_template *sht);
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0))
static int nsp_detect_old (struct scsi_host_template *sht);
static int nsp_release_old(struct Scsi_Host *shpnt);
#endif
static const char *nsp_info (struct Scsi_Host *shpnt);
static int nsp_proc_info (
#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
struct Scsi_Host *host,
#endif
char *buffer,
char **start,
off_t offset,
int length,
#if !(LINUX_VERSION_CODE > KERNEL_VERSION(2,5,73))
int hostno,
#endif
int inout);
static int nsp_queuecommand(Scsi_Cmnd *SCpnt, void (* done)(Scsi_Cmnd *SCpnt));
/* Error handler */
/*static int nsp_eh_abort (Scsi_Cmnd *SCpnt);*/
/*static int nsp_eh_device_reset(Scsi_Cmnd *SCpnt);*/
static int nsp_eh_bus_reset (Scsi_Cmnd *SCpnt);
static int nsp_eh_host_reset (Scsi_Cmnd *SCpnt);
static int nsp_bus_reset (nsp_hw_data *data);
/* */
static int nsphw_init (nsp_hw_data *data);
static int nsphw_start_selection(Scsi_Cmnd *SCpnt);
static void nsp_start_timer (Scsi_Cmnd *SCpnt, int time);
static int nsp_fifo_count (Scsi_Cmnd *SCpnt);
static void nsp_pio_read (Scsi_Cmnd *SCpnt);
static void nsp_pio_write (Scsi_Cmnd *SCpnt);
static int nsp_nexus (Scsi_Cmnd *SCpnt);
static void nsp_scsi_done (Scsi_Cmnd *SCpnt);
static int nsp_analyze_sdtr (Scsi_Cmnd *SCpnt);
static int nsp_negate_signal (Scsi_Cmnd *SCpnt, unsigned char mask, char *str);
static int nsp_expect_signal (Scsi_Cmnd *SCpnt, unsigned char current_phase, unsigned char mask);
static int nsp_xfer (Scsi_Cmnd *SCpnt, int phase);
static int nsp_dataphase_bypass (Scsi_Cmnd *SCpnt);
static int nsp_reselected (Scsi_Cmnd *SCpnt);
static struct Scsi_Host *nsp_detect(struct scsi_host_template *sht);
/* Interrupt handler */
//static irqreturn_t nspintr(int irq, void *dev_id);
/* Module entry point*/
static int __init nsp_cs_init(void);
static void __exit nsp_cs_exit(void);
/* Debug */
#ifdef NSP_DEBUG
static void show_command (Scsi_Cmnd *SCpnt);
static void show_phase (Scsi_Cmnd *SCpnt);
static void show_busphase(unsigned char stat);
static void show_message (nsp_hw_data *data);
#else
# define show_command(ptr) /* */
# define show_phase(SCpnt) /* */
# define show_busphase(stat) /* */
# define show_message(data) /* */
#endif
/*
* SCSI phase
*/
enum _scsi_phase {
PH_UNDETERMINED ,
PH_ARBSTART ,
PH_SELSTART ,
PH_SELECTED ,
PH_COMMAND ,
PH_DATA ,
PH_STATUS ,
PH_MSG_IN ,
PH_MSG_OUT ,
PH_DISCONNECT ,
PH_RESELECT ,
PH_ABORT ,
PH_RESET
};
enum _data_in_out {
IO_UNKNOWN,
IO_IN,
IO_OUT
};
enum _burst_mode {
BURST_IO8 = 0,
BURST_IO32 = 1,
BURST_MEM32 = 2,
};
/**************************************************************************
* SCSI messaage
*/
#define MSG_COMMAND_COMPLETE 0x00
#define MSG_EXTENDED 0x01
#define MSG_ABORT 0x06
#define MSG_NO_OPERATION 0x08
#define MSG_BUS_DEVICE_RESET 0x0c
#define MSG_EXT_SDTR 0x01
/**************************************************************************
* Compatibility functions
*/
/* for Kernel 2.4 */
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0))
# define scsi_register_host(template) scsi_register_module(MODULE_SCSI_HA, template)
# define scsi_unregister_host(template) scsi_unregister_module(MODULE_SCSI_HA, template)
# define scsi_host_put(host) scsi_unregister(host)
typedef void irqreturn_t;
# define IRQ_NONE /* */
# define IRQ_HANDLED /* */
# define IRQ_RETVAL(x) /* */
/* This is ad-hoc version of scsi_host_get_next() */
static inline struct Scsi_Host *scsi_host_get_next(struct Scsi_Host *host)
{
if (host == NULL) {
return scsi_hostlist;
} else {
return host->next;
}
}
/* This is ad-hoc version of scsi_host_hn_get() */
static inline struct Scsi_Host *scsi_host_hn_get(unsigned short hostno)
{
struct Scsi_Host *host;
for (host = scsi_host_get_next(NULL); host != NULL;
host = scsi_host_get_next(host)) {
if (host->host_no == hostno) {
break;
}
}
return host;
}
static void cs_error(struct pcmcia_device *handle, int func, int ret)
{
error_info_t err = { func, ret };
pcmcia_report_error(handle, &err);
}
/* scatter-gather table */
# define BUFFER_ADDR (SCpnt->SCp.buffer->address)
#endif
/* for Kernel 2.6 */
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
/* scatter-gather table */
# define BUFFER_ADDR ((char *)((unsigned int)(SCpnt->SCp.buffer->page) + SCpnt->SCp.buffer->offset))
#endif
#endif /*__nsp_cs__*/
/* end */
Reference in a new issue View git blame Copy permalink