Janusz Krzysztofik 8452e9ef2b OMAP1: Amstrad Delta: add support for camera ... This patch adds configuration data and initialization code required for camera support to the Amstrad Delta board. Three devices are declared: SoC camera, OMAP1 camera interface and OV6650 sensor. Default 12MHz clock has been selected for driving the sensor. Pixel clock has been limited to get reasonable frame rates, not exceeding the board capabilities. Since both devices (interface and sensor) support both pixel clock polarities, decision on polarity selection has been left to drivers. Interface GPIO line has been found not functional, thus not configured. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tony Lindgren <tony@atomide.com>		2010-10-01 16:37:00 -07:00
..
include/mach	OMAP1: Add support for SoC camera interface	2010-10-01 16:37:00 -07:00
ams-delta-fiq-handler.S	OMAP1: Amstrad Delta: add FIQ handler for serial keyboardport interrupt processing	2010-05-05 11:11:10 -07:00
ams-delta-fiq.c	OMAP1: Amstrad Delta: add a handler for processing interruptsgenerated by the FIQ routine	2010-05-05 11:11:10 -07:00
board-ams-delta.c	OMAP1: Amstrad Delta: add support for camera	2010-10-01 16:37:00 -07:00
board-fsample.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-generic.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-h2-mmc.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-h2.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-h2.h	ARM: OMAP: No need to include board-h2.h from hardware.h	2009-03-23 18:07:33 -07:00
board-h3-mmc.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-h3.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-h3.h	ARM: OMAP: No need to include board-h3.h from hardware.h	2009-03-23 18:07:33 -07:00
board-htcherald.c	HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046	2010-09-23 11:05:17 -07:00
board-innovator.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-nokia770.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-osk.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-palmte.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-palmtt.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-palmz71.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-perseus2.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-sx1-mmc.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-sx1.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
board-voiceblue.c	Merge branch 'devel-map-io' into omap-for-linus	2010-08-04 14:43:45 +03:00
clock.c	OMAP1: clock: some cleanup	2010-07-26 16:34:28 -06:00
clock.h	OMAP1: clock: some cleanup	2010-07-26 16:34:28 -06:00
clock_data.c	Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into omap-for-linus	2010-08-04 08:46:24 +03:00
devices.c	OMAP1: Add support for SoC camera interface	2010-10-01 16:37:00 -07:00
flash.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
fpga.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
i2c.c	omap: i2c: Fix muxing for command line enabled bus	2010-02-25 14:45:08 -08:00
id.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
io.c	ARM: OMAP: Convert to use ->reserve method to reserve boot time memory	2010-07-16 11:06:41 +01:00
irq.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
Kconfig	Merge branch 'for_2.6.36' of git://git.pwsan.com/linux-2.6 into omap-for-linus	2010-08-04 08:46:24 +03:00
lcd_dma.c	omap1: LCD_DMA: Use some define rather than a hexadecimal	2009-12-11 16:16:36 -08:00
leds-h2p2-debug.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
leds-innovator.c	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
leds-osk.c	ARM: OMAP: switch to standard gpio get/set calls	2008-12-10 17:35:25 -08:00
leds.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
leds.h	[PATCH] ARM: 2799/1: OMAP update 4/11: Move OMAP1 LED code into mach-omap1 directory	2005-07-10 19:58:10 +01:00
mailbox.c	omap: mailbox: reorganize headers	2010-08-04 15:50:20 +03:00
Makefile	OMAP1: PM: add simple runtime PM layer to manage clocks	2010-09-21 11:51:23 -07:00
Makefile.boot	[PATCH] ARM: 2798/1: OMAP update 2/11: Change ARM Kconfig to support omap1 and omap2	2005-07-10 19:58:08 +01:00
mcbsp.c	Removing dead OMAP_DSP	2010-07-05 16:31:54 +03:00
mux.c	Merge branch 'devel-misc' into omap-for-linus	2010-08-02 14:23:38 +03:00
opp.h	OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c	2009-12-11 17:00:40 -07:00
opp_data.c	OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c	2009-12-11 17:00:40 -07:00
pm.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
pm.h	OMAP850: PM: Add an ARCH_OMAP850 check	2009-10-07 23:14:08 +01:00
pm_bus.c	OMAP1: PM: add simple runtime PM layer to manage clocks	2010-09-21 11:51:23 -07:00
serial.c	omap1: omap7xx clocks, mux, serial fixes	2010-08-02 14:21:39 +03:00
sleep.S	OMAP7XX: Rename all the rest of the omap730 references in omap1 core	2009-10-07 23:14:06 +01:00
sram.S	OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead	2009-08-28 10:50:33 -07:00
time.c	OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead	2009-08-28 10:50:33 -07:00
timer32k.c	arm: omap1: remove dead code from timer32k.c	2010-04-22 17:32:36 -07:00
usb.c	omap: Move omap1 USB platform init code into mach-omap1/usb.c	2010-07-05 16:31:30 +03:00