android_kernel_motorola_sm6225/drivers/net/wireless/rt2x00
Helmut Schaa 9e33a35538 rt2x00: Implement tx power temperature compensation
rt2800 devices should adjust their tx power in accordance with the
eeproms temperature calibration values. Add a new driver callback
gain_calibration that is called every 4 seconds.

The rt2800 gain calibration routine simply runs the tx power
configuration that takes care of calculating the temperature
compensation delta.

We don't need to synchronize the calls to rt2800_config_txpower
as they should all happen from mac80211's single threaded workqueue.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-04 16:20:03 -04:00
..
Kconfig rt2x00: Add support for RT5390 chip 2011-02-21 15:40:00 -05:00
Makefile
rt2x00.h rt2x00: Implement tx power temperature compensation 2011-04-04 16:20:03 -04:00
rt2x00config.c rt2x00: Fix pointer errors. 2011-01-04 14:35:14 -05:00
rt2x00crypto.c
rt2x00debug.c rt2x00: Protect queue control with mutex 2010-12-13 15:23:35 -05:00
rt2x00debug.h
rt2x00dev.c rt2x00: Implement tx power temperature compensation 2011-04-04 16:20:03 -04:00
rt2x00dump.h
rt2x00firmware.c rt2x00: Don't leak mem in error path of rt2x00lib_request_firmware() 2011-01-13 15:46:45 -05:00
rt2x00ht.c rt2x00: Don't call ieee80211_get_tx_rate for MCS rates 2011-03-04 14:06:48 -05:00
rt2x00leds.c
rt2x00leds.h
rt2x00lib.h rt2x00: Implement tx power temperature compensation 2011-04-04 16:20:03 -04:00
rt2x00link.c rt2x00: Implement tx power temperature compensation 2011-04-04 16:20:03 -04:00
rt2x00mac.c rt2x00: Optimize getting the beacon queue structure. 2011-03-04 14:06:49 -05:00
rt2x00pci.c rt2x00: Limit rt2x00pci rxdone processing to 16 entries at once 2011-04-04 16:20:01 -04:00
rt2x00pci.h rt2x00: Limit rt2x00pci rxdone processing to 16 entries at once 2011-04-04 16:20:01 -04:00
rt2x00queue.c rt2x00: Remove obsolete rt2x00queue_align_payload 2011-04-04 16:20:03 -04:00
rt2x00queue.h rt2x00: Use an enum instead of u16 for the rate_mode TX descriptor field 2011-03-04 14:06:48 -05:00
rt2x00reg.h rt2x00: Remove STATE_RADIO_IRQ_OFF_ISR and STATE_RADIO_IRQ_ON_ISR 2011-01-31 15:06:24 -05:00
rt2x00soc.c rt2x00: Use ioremap for SoC devices instead of KSEG1ADDR. 2010-11-17 16:18:54 -05:00
rt2x00soc.h
rt2x00usb.c rt2x00: Move TX/RX work into dedicated workqueue 2011-01-31 15:06:25 -05:00
rt2x00usb.h rt2x00: Add "flush" queue command 2010-12-13 15:23:35 -05:00
rt61pci.c rt2x00: Limit rt2x00pci rxdone processing to 16 entries at once 2011-04-04 16:20:01 -04:00
rt61pci.h rt2x00: Fix WMM Queue naming 2010-12-13 15:23:36 -05:00
rt73usb.c rt2x00: Remove DRIVER_SUPPORT_WATCHDOG flag 2011-04-04 16:20:02 -04:00
rt73usb.h rt2x00: Fix WMM Queue naming 2010-12-13 15:23:36 -05:00
rt2400pci.c rt2x00: Limit rt2x00pci rxdone processing to 16 entries at once 2011-04-04 16:20:01 -04:00
rt2400pci.h rt2x00: checkpatch.pl error fixes for rt2400pci.h 2010-11-15 13:26:13 -05:00
rt2500pci.c rt2x00: Limit rt2x00pci rxdone processing to 16 entries at once 2011-04-04 16:20:01 -04:00
rt2500pci.h rt2x00: checkpatch.pl error fixes for rt2500pci.h 2010-11-15 13:26:15 -05:00
rt2500usb.c rt2x00: Remove DRIVER_SUPPORT_WATCHDOG flag 2011-04-04 16:20:02 -04:00
rt2500usb.h
rt2800.h rt2x00: Implement tx power temperature compensation 2011-04-04 16:20:03 -04:00
rt2800lib.c rt2x00: Implement tx power temperature compensation 2011-04-04 16:20:03 -04:00
rt2800lib.h rt2x00: Implement tx power temperature compensation 2011-04-04 16:20:03 -04:00
rt2800pci.c rt2x00: Implement tx power temperature compensation 2011-04-04 16:20:03 -04:00
rt2800pci.h rt2x00: checkpatch.pl error fixes for rt2800pci.h 2010-11-15 13:26:20 -05:00
rt2800usb.c rt2x00: Implement tx power temperature compensation 2011-04-04 16:20:03 -04:00
rt2800usb.h rt2x00: checkpatch.pl error fixes for rt2800usb.h 2010-11-15 13:26:23 -05:00