android_kernel_motorola_sm6225/drivers/md/dm-mpath-hp-sw.c
Dave Wysochanski fe97e2aa05 dm mpath: hp retry if not ready
This patch adds retries to the hp hardware handler, and utilizes the
MP_RETRY flag of dm-multipath.  For now in the hp handler, if we get a
pg_init completed with a check condition we just assume we can retry the
pg_init command.  We make this assumption because of incomplete data on
specific check condition code of the HP hardware, and because testing
has shown the HP path initialization command to be idempotent.
The number of times we retry is settable via the "pg_init_retries"
multipath map feature.

Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2007-10-20 02:01:20 +01:00

248 lines
6.3 KiB
C

/*
* Copyright (C) 2005 Mike Christie, All rights reserved.
* Copyright (C) 2007 Red Hat, Inc. All rights reserved.
* Authors: Mike Christie
* Dave Wysochanski
*
* This file is released under the GPL.
*
* This module implements the specific path activation code for
* HP StorageWorks and FSC FibreCat Asymmetric (Active/Passive)
* storage arrays.
* These storage arrays have controller-based failover, not
* LUN-based failover. However, LUN-based failover is the design
* of dm-multipath. Thus, this module is written for LUN-based failover.
*/
#include <linux/blkdev.h>
#include <linux/list.h>
#include <linux/types.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
#include "dm.h"
#include "dm-hw-handler.h"
#define DM_MSG_PREFIX "multipath hp-sw"
#define DM_HP_HWH_NAME "hp-sw"
#define DM_HP_HWH_VER "1.0.0"
struct hp_sw_context {
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
};
/*
* hp_sw_error_is_retryable - Is an HP-specific check condition retryable?
* @req: path activation request
*
* Examine error codes of request and determine whether the error is retryable.
* Some error codes are already retried by scsi-ml (see
* scsi_decide_disposition), but some HP specific codes are not.
* The intent of this routine is to supply the logic for the HP specific
* check conditions.
*
* Returns:
* 1 - command completed with retryable error
* 0 - command completed with non-retryable error
*
* Possible optimizations
* 1. More hardware-specific error codes
*/
static int hp_sw_error_is_retryable(struct request *req)
{
/*
* NOT_READY is known to be retryable
* For now we just dump out the sense data and call it retryable
*/
if (status_byte(req->errors) == CHECK_CONDITION)
__scsi_print_sense(DM_HP_HWH_NAME, req->sense, req->sense_len);
/*
* At this point we don't have complete information about all the error
* codes from this hardware, so we are just conservative and retry
* when in doubt.
*/
return 1;
}
/*
* hp_sw_end_io - Completion handler for HP path activation.
* @req: path activation request
* @error: scsi-ml error
*
* Check sense data, free request structure, and notify dm that
* pg initialization has completed.
*
* Context: scsi-ml softirq
*
*/
static void hp_sw_end_io(struct request *req, int error)
{
struct dm_path *path = req->end_io_data;
unsigned err_flags = 0;
if (!error) {
DMDEBUG("%s path activation command - success",
path->dev->name);
goto out;
}
if (hp_sw_error_is_retryable(req)) {
DMDEBUG("%s path activation command - retry",
path->dev->name);
err_flags = MP_RETRY;
goto out;
}
DMWARN("%s path activation fail - error=0x%x",
path->dev->name, error);
err_flags = MP_FAIL_PATH;
out:
req->end_io_data = NULL;
__blk_put_request(req->q, req);
dm_pg_init_complete(path, err_flags);
}
/*
* hp_sw_get_request - Allocate an HP specific path activation request
* @path: path on which request will be sent (needed for request queue)
*
* The START command is used for path activation request.
* These arrays are controller-based failover, not LUN based.
* One START command issued to a single path will fail over all
* LUNs for the same controller.
*
* Possible optimizations
* 1. Make timeout configurable
* 2. Preallocate request
*/
static struct request *hp_sw_get_request(struct dm_path *path)
{
struct request *req;
struct block_device *bdev = path->dev->bdev;
struct request_queue *q = bdev_get_queue(bdev);
struct hp_sw_context *h = path->hwhcontext;
req = blk_get_request(q, WRITE, GFP_NOIO);
if (!req)
goto out;
req->timeout = 60 * HZ;
req->errors = 0;
req->cmd_type = REQ_TYPE_BLOCK_PC;
req->cmd_flags |= REQ_FAILFAST | REQ_NOMERGE;
req->end_io_data = path;
req->sense = h->sense;
memset(req->sense, 0, SCSI_SENSE_BUFFERSIZE);
memset(&req->cmd, 0, BLK_MAX_CDB);
req->cmd[0] = START_STOP;
req->cmd[4] = 1;
req->cmd_len = COMMAND_SIZE(req->cmd[0]);
out:
return req;
}
/*
* hp_sw_pg_init - HP path activation implementation.
* @hwh: hardware handler specific data
* @bypassed: unused; is the path group bypassed? (see dm-mpath.c)
* @path: path to send initialization command
*
* Send an HP-specific path activation command on 'path'.
* Do not try to optimize in any way, just send the activation command.
* More than one path activation command may be sent to the same controller.
* This seems to work fine for basic failover support.
*
* Possible optimizations
* 1. Detect an in-progress activation request and avoid submitting another one
* 2. Model the controller and only send a single activation request at a time
* 3. Determine the state of a path before sending an activation request
*
* Context: kmpathd (see process_queued_ios() in dm-mpath.c)
*/
static void hp_sw_pg_init(struct hw_handler *hwh, unsigned bypassed,
struct dm_path *path)
{
struct request *req;
struct hp_sw_context *h;
path->hwhcontext = hwh->context;
h = hwh->context;
req = hp_sw_get_request(path);
if (!req) {
DMERR("%s path activation command - allocation fail",
path->dev->name);
goto retry;
}
DMDEBUG("%s path activation command - sent", path->dev->name);
blk_execute_rq_nowait(req->q, NULL, req, 1, hp_sw_end_io);
return;
retry:
dm_pg_init_complete(path, MP_RETRY);
}
static int hp_sw_create(struct hw_handler *hwh, unsigned argc, char **argv)
{
struct hp_sw_context *h;
h = kmalloc(sizeof(*h), GFP_KERNEL);
if (!h)
return -ENOMEM;
hwh->context = h;
return 0;
}
static void hp_sw_destroy(struct hw_handler *hwh)
{
struct hp_sw_context *h = hwh->context;
kfree(h);
}
static struct hw_handler_type hp_sw_hwh = {
.name = DM_HP_HWH_NAME,
.module = THIS_MODULE,
.create = hp_sw_create,
.destroy = hp_sw_destroy,
.pg_init = hp_sw_pg_init,
};
static int __init hp_sw_init(void)
{
int r;
r = dm_register_hw_handler(&hp_sw_hwh);
if (r < 0)
DMERR("register failed %d", r);
else
DMINFO("version " DM_HP_HWH_VER " loaded");
return r;
}
static void __exit hp_sw_exit(void)
{
int r;
r = dm_unregister_hw_handler(&hp_sw_hwh);
if (r < 0)
DMERR("unregister failed %d", r);
}
module_init(hp_sw_init);
module_exit(hp_sw_exit);
MODULE_DESCRIPTION("DM Multipath HP StorageWorks / FSC FibreCat (A/P) support");
MODULE_AUTHOR("Mike Christie, Dave Wysochanski <dm-devel@redhat.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DM_HP_HWH_VER);