android_kernel_motorola_sm6225/drivers/usb
Alan Stern a8693424c7 USB: OHCI: accept very late isochronous URBs
Commit 24f531371d (USB: EHCI: accept very late isochronous URBs)
changed the isochronous API provided by ehci-hcd.  URBs submitted too
late, so that the time slots for all their packets have already
expired, are no longer rejected outright.  Instead the submission is
accepted, and the URB completes normally with a -EXDEV error for each
packet.  This is what client drivers expect.

This patch implements the same policy in ohci-hcd.  The change is more
complicated than it was in ehci-hcd, because ohci-hcd doesn't scan for
isochronous completions in the same way as ehci-hcd does.  Rather, it
depends on the hardware adding completed TDs to a "done queue".  Some
OHCI controller don't handle this properly when a TD's time slot has
already expired, so we have to avoid adding such TDs to the schedule
in the first place.  As a result, if the URB was submitted too late
then none of its TDs will get put on the schedule, so none of them
will end up on the done queue, so the driver will never realize that
the URB should be completed.

To solve this problem, the patch adds one to urb_priv->td_cnt for such
URBs, making it larger than urb_priv->length (td_cnt already gets set
to the number of TD's that had to be skipped because their slots have
expired).  Each time an URB is given back, the finish_urb() routine
looks to see if urb_priv->td_cnt for the next URB on the same endpoint
is marked in this way.  If so, it gives back the next URB right away.

This should be applied to all kernels containing commit 815fa7b917
(USB: OHCI: fix logic for scheduling isochronous URBs).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25 17:05:35 -07:00
..
atm usb: atm: speedtch: be careful with bInterval 2013-07-25 11:49:30 -07:00
c67x00 USB: c67x00: use dev_get_platdata() 2013-07-31 17:28:44 -07:00
chipidea USB: chipidea: i.MX: simplify usbmisc 2013-08-14 12:37:20 -07:00
class USB: usbtmc: fix up attribute permissions 2013-08-25 15:12:03 -07:00
core usbcore: check usb device's state before sending a Set SEL control transfer 2013-09-23 15:43:32 -07:00
dwc3 usb: dwc3: gadget: avoid memory leak when failing to allocate all eps 2013-09-17 11:05:01 -05:00
early fix build of EHCI debug port code when USB_CHIPIDEA but !USB_EHCI_HCD 2012-11-02 10:13:33 -07:00
gadget usb: fixes for v3.12-rc2 2013-09-17 13:00:43 -07:00
host USB: OHCI: accept very late isochronous URBs 2013-09-25 17:05:35 -07:00
image USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
misc Merge 3.11-rc6 into usb-next 2013-08-18 20:33:01 -07:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb Remove GENERIC_HARDIRQ config option 2013-09-13 15:09:52 +02:00
phy usb: phy: omap-usb3: Fix return value 2013-09-17 11:05:30 -05:00
renesas_usbhs Remove GENERIC_HARDIRQ config option 2013-09-13 15:09:52 +02:00
serial USB: pl2303: distinguish between original and cloned HX chips 2013-09-17 09:36:10 -07:00
storage USB storage: audit sysfs attribute permissions 2013-08-27 13:13:07 -07:00
wusbcore Merge 3.11-rc6 into usb-next 2013-08-18 20:33:01 -07:00
Kconfig usb: Move definition of USB_EHCI_BIG_ENDIAN_MMIO et al. out side of the ifs. 2013-08-12 12:18:38 -07:00
Makefile usb: patches for v3.12 merge window 2013-08-13 15:28:01 -07:00
README
usb-common.c usb: common: introduce of_usb_get_maximum_speed() 2013-07-29 13:56:46 +03:00
usb-skeleton.c USB: usb-skeleton.c: add retry for nonblocking read 2013-07-25 12:01:13 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.