asgardius/android_kernel_motorola_sm6225
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_motorola_sm6225/include/asm-mips/asm.h
Thomas Bogendoerfer 930bff8822 [MIPS] IP28: added cache barrier to assembly routines 
IP28 needs special treatment to avoid speculative accesses. gcc
takes care for .c code, but for assembly code we need to do it
manually.

This is taken from Peter Fuersts IP28 patches.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2008-01-29 10:14:58 +00:00

409 lines
9.3 KiB
C
Raw Blame History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
* Copyright (C) 1999 by Silicon Graphics, Inc.
* Copyright (C) 2001 MIPS Technologies, Inc.
* Copyright (C) 2002 Maciej W. Rozycki
*
* Some useful macros for MIPS assembler code
*
* Some of the routines below contain useless nops that will be optimized
* away by gas in -O mode. These nops are however required to fill delay
* slots in noreorder mode.
*/
#ifndef __ASM_ASM_H
#define __ASM_ASM_H
#include <asm/sgidefs.h>
#ifndef CAT
#ifdef __STDC__
#define __CAT(str1, str2) str1##str2
#else
#define __CAT(str1, str2) str1/**/str2
#endif
#define CAT(str1, str2) __CAT(str1, str2)
#endif
/*
* PIC specific declarations
* Not used for the kernel but here seems to be the right place.
*/
#ifdef __PIC__
#define CPRESTORE(register) \
.cprestore register
#define CPADD(register) \
.cpadd register
#define CPLOAD(register) \
.cpload register
#else
#define CPRESTORE(register)
#define CPADD(register)
#define CPLOAD(register)
#endif
/*
* LEAF - declare leaf routine
*/
#define LEAF(symbol) \
.globl symbol; \
.align 2; \
.type symbol, @function; \
.ent symbol, 0; \
symbol: .frame sp, 0, ra
/*
* NESTED - declare nested routine entry point
*/
#define NESTED(symbol, framesize, rpc) \
.globl symbol; \
.align 2; \
.type symbol, @function; \
.ent symbol, 0; \
symbol: .frame sp, framesize, rpc
/*
* END - mark end of function
*/
#define END(function) \
.end function; \
.size function, .-function
/*
* EXPORT - export definition of symbol
*/
#define EXPORT(symbol) \
.globl symbol; \
symbol:
/*
* FEXPORT - export definition of a function symbol
*/
#define FEXPORT(symbol) \
.globl symbol; \
.type symbol, @function; \
symbol:
/*
* ABS - export absolute symbol
*/
#define ABS(symbol,value) \
.globl symbol; \
symbol = value
#define PANIC(msg) \
.set push; \
.set reorder; \
PTR_LA a0, 8f; \
jal panic; \
9: b 9b; \
.set pop; \
TEXT(msg)
/*
* Print formatted string
*/
#ifdef CONFIG_PRINTK
#define PRINT(string) \
.set push; \
.set reorder; \
PTR_LA a0, 8f; \
jal printk; \
.set pop; \
TEXT(string)
#else
#define PRINT(string)
#endif
#define TEXT(msg) \
.pushsection .data; \
8: .asciiz msg; \
.popsection;
/*
* Build text tables
*/
#define TTABLE(string) \
.pushsection .text; \
.word 1f; \
.popsection \
.pushsection .data; \
1: .asciiz string; \
.popsection
/*
* MIPS IV pref instruction.
* Use with .set noreorder only!
*
* MIPS IV implementations are free to treat this as a nop. The R5000
* is one of them. So we should have an option not to use this instruction.
*/
#ifdef CONFIG_CPU_HAS_PREFETCH
#define PREF(hint,addr) \
.set push; \
.set mips4; \
pref hint, addr; \
.set pop
#define PREFX(hint,addr) \
.set push; \
.set mips4; \
prefx hint, addr; \
.set pop
#else /* !CONFIG_CPU_HAS_PREFETCH */
#define PREF(hint, addr)
#define PREFX(hint, addr)
#endif /* !CONFIG_CPU_HAS_PREFETCH */
/*
* MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
*/
#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
#define MOVN(rd, rs, rt) \
.set push; \
.set reorder; \
beqz rt, 9f; \
move rd, rs; \
.set pop; \
9:
#define MOVZ(rd, rs, rt) \
.set push; \
.set reorder; \
bnez rt, 9f; \
move rd, rs; \
.set pop; \
9:
#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
#define MOVN(rd, rs, rt) \
.set push; \
.set noreorder; \
bnezl rt, 9f; \
move rd, rs; \
.set pop; \
9:
#define MOVZ(rd, rs, rt) \
.set push; \
.set noreorder; \
beqzl rt, 9f; \
move rd, rs; \
.set pop; \
9:
#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
(_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
#define MOVN(rd, rs, rt) \
movn rd, rs, rt
#define MOVZ(rd, rs, rt) \
movz rd, rs, rt
#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
/*
* Stack alignment
*/
#if (_MIPS_SIM == _MIPS_SIM_ABI32)
#define ALSZ 7
#define ALMASK ~7
#endif
#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
#define ALSZ 15
#define ALMASK ~15
#endif
/*
* Macros to handle different pointer/register sizes for 32/64-bit code
*/
/*
* Size of a register
*/
#ifdef __mips64
#define SZREG 8
#else
#define SZREG 4
#endif
/*
* Use the following macros in assemblercode to load/store registers,
* pointers etc.
*/
#if (_MIPS_SIM == _MIPS_SIM_ABI32)
#define REG_S sw
#define REG_L lw
#define REG_SUBU subu
#define REG_ADDU addu
#endif
#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
#define REG_S sd
#define REG_L ld
#define REG_SUBU dsubu
#define REG_ADDU daddu
#endif
/*
* How to add/sub/load/store/shift C int variables.
*/
#if (_MIPS_SZINT == 32)
#define INT_ADD add
#define INT_ADDU addu
#define INT_ADDI addi
#define INT_ADDIU addiu
#define INT_SUB sub
#define INT_SUBU subu
#define INT_L lw
#define INT_S sw
#define INT_SLL sll
#define INT_SLLV sllv
#define INT_SRL srl
#define INT_SRLV srlv
#define INT_SRA sra
#define INT_SRAV srav
#endif
#if (_MIPS_SZINT == 64)
#define INT_ADD dadd
#define INT_ADDU daddu
#define INT_ADDI daddi
#define INT_ADDIU daddiu
#define INT_SUB dsub
#define INT_SUBU dsubu
#define INT_L ld
#define INT_S sd
#define INT_SLL dsll
#define INT_SLLV dsllv
#define INT_SRL dsrl
#define INT_SRLV dsrlv
#define INT_SRA dsra
#define INT_SRAV dsrav
#endif
/*
* How to add/sub/load/store/shift C long variables.
*/
#if (_MIPS_SZLONG == 32)
#define LONG_ADD add
#define LONG_ADDU addu
#define LONG_ADDI addi
#define LONG_ADDIU addiu
#define LONG_SUB sub
#define LONG_SUBU subu
#define LONG_L lw
#define LONG_S sw
#define LONG_SLL sll
#define LONG_SLLV sllv
#define LONG_SRL srl
#define LONG_SRLV srlv
#define LONG_SRA sra
#define LONG_SRAV srav
#define LONG .word
#define LONGSIZE 4
#define LONGMASK 3
#define LONGLOG 2
#endif
#if (_MIPS_SZLONG == 64)
#define LONG_ADD dadd
#define LONG_ADDU daddu
#define LONG_ADDI daddi
#define LONG_ADDIU daddiu
#define LONG_SUB dsub
#define LONG_SUBU dsubu
#define LONG_L ld
#define LONG_S sd
#define LONG_SLL dsll
#define LONG_SLLV dsllv
#define LONG_SRL dsrl
#define LONG_SRLV dsrlv
#define LONG_SRA dsra
#define LONG_SRAV dsrav
#define LONG .dword
#define LONGSIZE 8
#define LONGMASK 7
#define LONGLOG 3
#endif
/*
* How to add/sub/load/store/shift pointers.
*/
#if (_MIPS_SZPTR == 32)
#define PTR_ADD add
#define PTR_ADDU addu
#define PTR_ADDI addi
#define PTR_ADDIU addiu
#define PTR_SUB sub
#define PTR_SUBU subu
#define PTR_L lw
#define PTR_S sw
#define PTR_LA la
#define PTR_LI li
#define PTR_SLL sll
#define PTR_SLLV sllv
#define PTR_SRL srl
#define PTR_SRLV srlv
#define PTR_SRA sra
#define PTR_SRAV srav
#define PTR_SCALESHIFT 2
#define PTR .word
#define PTRSIZE 4
#define PTRLOG 2
#endif
#if (_MIPS_SZPTR == 64)
#define PTR_ADD dadd
#define PTR_ADDU daddu
#define PTR_ADDI daddi
#define PTR_ADDIU daddiu
#define PTR_SUB dsub
#define PTR_SUBU dsubu
#define PTR_L ld
#define PTR_S sd
#define PTR_LA dla
#define PTR_LI dli
#define PTR_SLL dsll
#define PTR_SLLV dsllv
#define PTR_SRL dsrl
#define PTR_SRLV dsrlv
#define PTR_SRA dsra
#define PTR_SRAV dsrav
#define PTR_SCALESHIFT 3
#define PTR .dword
#define PTRSIZE 8
#define PTRLOG 3
#endif
/*
* Some cp0 registers were extended to 64bit for MIPS III.
*/
#if (_MIPS_SIM == _MIPS_SIM_ABI32)
#define MFC0 mfc0
#define MTC0 mtc0
#endif
#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
#define MFC0 dmfc0
#define MTC0 dmtc0
#endif
#define SSNOP sll zero, zero, 1
#ifdef CONFIG_SGI_IP28
/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
#include <asm/cacheops.h>
#define R10KCBARRIER(addr) cache Cache_Barrier, addr;
#else
#define R10KCBARRIER(addr)
#endif
#endif /* __ASM_ASM_H */
Reference in a new issue View git blame Copy permalink