android_kernel_motorola_sm6225/arch/arm/plat-omap/timer32k.c
Linus Torvalds 0cd61b68c3 Initial blind fixup for arm for irq changes
Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 10:59:54 -07:00

330 lines
9.3 KiB
C

/*
* linux/arch/arm/plat-omap/timer32k.c
*
* OMAP 32K Timer
*
* Copyright (C) 2004 - 2005 Nokia Corporation
* Partial timer rewrite and additional dynamic tick timer support by
* Tony Lindgen <tony@atomide.com> and
* Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* OMAP Dual-mode timer framework support by Timo Teras
*
* MPU timer code based on the older MPU timer code for OMAP
* Copyright (C) 2000 RidgeRun, Inc.
* Author: Greg Lonnon <glonnon@ridgerun.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/system.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/leds.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/arch/dmtimer.h>
struct sys_timer omap_timer;
/*
* ---------------------------------------------------------------------------
* 32KHz OS timer
*
* This currently works only on 16xx, as 1510 does not have the continuous
* 32KHz synchronous timer. The 32KHz synchronous timer is used to keep track
* of time in addition to the 32KHz OS timer. Using only the 32KHz OS timer
* on 1510 would be possible, but the timer would not be as accurate as
* with the 32KHz synchronized timer.
* ---------------------------------------------------------------------------
*/
#if defined(CONFIG_ARCH_OMAP16XX)
#define TIMER_32K_SYNCHRONIZED 0xfffbc410
#elif defined(CONFIG_ARCH_OMAP24XX)
#define TIMER_32K_SYNCHRONIZED 0x48004010
#else
#error OMAP 32KHz timer does not currently work on 15XX!
#endif
/* 16xx specific defines */
#define OMAP1_32K_TIMER_BASE 0xfffb9000
#define OMAP1_32K_TIMER_CR 0x08
#define OMAP1_32K_TIMER_TVR 0x00
#define OMAP1_32K_TIMER_TCR 0x04
#define OMAP_32K_TICKS_PER_HZ (32768 / HZ)
/*
* TRM says 1 / HZ = ( TVR + 1) / 32768, so TRV = (32768 / HZ) - 1
* so with HZ = 128, TVR = 255.
*/
#define OMAP_32K_TIMER_TICK_PERIOD ((32768 / HZ) - 1)
#define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate) \
(((nr_jiffies) * (clock_rate)) / HZ)
#if defined(CONFIG_ARCH_OMAP1)
static inline void omap_32k_timer_write(int val, int reg)
{
omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
}
static inline unsigned long omap_32k_timer_read(int reg)
{
return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
}
static inline void omap_32k_timer_start(unsigned long load_val)
{
if (!load_val)
load_val = 1;
omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
}
static inline void omap_32k_timer_stop(void)
{
omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
}
#define omap_32k_timer_ack_irq()
#elif defined(CONFIG_ARCH_OMAP2)
static struct omap_dm_timer *gptimer;
static inline void omap_32k_timer_start(unsigned long load_val)
{
omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
omap_dm_timer_start(gptimer);
}
static inline void omap_32k_timer_stop(void)
{
omap_dm_timer_stop(gptimer);
}
static inline void omap_32k_timer_ack_irq(void)
{
u32 status = omap_dm_timer_read_status(gptimer);
omap_dm_timer_write_status(gptimer, status);
}
#endif
/*
* The 32KHz synchronized timer is an additional timer on 16xx.
* It is always running.
*/
static inline unsigned long omap_32k_sync_timer_read(void)
{
return omap_readl(TIMER_32K_SYNCHRONIZED);
}
/*
* Rounds down to nearest usec. Note that this will overflow for larger values.
*/
static inline unsigned long omap_32k_ticks_to_usecs(unsigned long ticks_32k)
{
return (ticks_32k * 5*5*5*5*5*5) >> 9;
}
/*
* Rounds down to nearest nsec.
*/
static inline unsigned long long
omap_32k_ticks_to_nsecs(unsigned long ticks_32k)
{
return (unsigned long long) ticks_32k * 1000 * 5*5*5*5*5*5 >> 9;
}
static unsigned long omap_32k_last_tick = 0;
/*
* Returns elapsed usecs since last 32k timer interrupt
*/
static unsigned long omap_32k_timer_gettimeoffset(void)
{
unsigned long now = omap_32k_sync_timer_read();
return omap_32k_ticks_to_usecs(now - omap_32k_last_tick);
}
/*
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
*/
unsigned long long sched_clock(void)
{
return omap_32k_ticks_to_nsecs(omap_32k_sync_timer_read());
}
/*
* Timer interrupt for 32KHz timer. When dynamic tick is enabled, this
* function is also called from other interrupts to remove latency
* issues with dynamic tick. In the dynamic tick case, we need to lock
* with irqsave.
*/
static inline irqreturn_t _omap_32k_timer_interrupt(int irq, void *dev_id)
{
unsigned long now;
omap_32k_timer_ack_irq();
now = omap_32k_sync_timer_read();
while ((signed long)(now - omap_32k_last_tick)
>= OMAP_32K_TICKS_PER_HZ) {
omap_32k_last_tick += OMAP_32K_TICKS_PER_HZ;
timer_tick();
}
/* Restart timer so we don't drift off due to modulo or dynamic tick.
* By default we program the next timer to be continuous to avoid
* latencies during high system load. During dynamic tick operation the
* continuous timer can be overridden from pm_idle to be longer.
*/
omap_32k_timer_start(omap_32k_last_tick + OMAP_32K_TICKS_PER_HZ - now);
return IRQ_HANDLED;
}
static irqreturn_t omap_32k_timer_handler(int irq, void *dev_id)
{
return _omap_32k_timer_interrupt(irq, dev_id);
}
static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
{
unsigned long flags;
write_seqlock_irqsave(&xtime_lock, flags);
_omap_32k_timer_interrupt(irq, dev_id);
write_sequnlock_irqrestore(&xtime_lock, flags);
return IRQ_HANDLED;
}
#ifdef CONFIG_NO_IDLE_HZ
/*
* Programs the next timer interrupt needed. Called when dynamic tick is
* enabled, and to reprogram the ticks to skip from pm_idle. Note that
* we can keep the timer continuous, and don't need to set it to run in
* one-shot mode. This is because the timer will get reprogrammed again
* after next interrupt.
*/
void omap_32k_timer_reprogram(unsigned long next_tick)
{
unsigned long ticks = JIFFIES_TO_HW_TICKS(next_tick, 32768) + 1;
unsigned long now = omap_32k_sync_timer_read();
unsigned long idled = now - omap_32k_last_tick;
if (idled + 1 < ticks)
ticks -= idled;
else
ticks = 1;
omap_32k_timer_start(ticks);
}
static struct irqaction omap_32k_timer_irq;
extern struct timer_update_handler timer_update;
static int omap_32k_timer_enable_dyn_tick(void)
{
/* No need to reprogram timer, just use the next interrupt */
return 0;
}
static int omap_32k_timer_disable_dyn_tick(void)
{
omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
return 0;
}
static struct dyn_tick_timer omap_dyn_tick_timer = {
.enable = omap_32k_timer_enable_dyn_tick,
.disable = omap_32k_timer_disable_dyn_tick,
.reprogram = omap_32k_timer_reprogram,
.handler = omap_32k_timer_handler,
};
#endif /* CONFIG_NO_IDLE_HZ */
static struct irqaction omap_32k_timer_irq = {
.name = "32KHz timer",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = omap_32k_timer_interrupt,
};
static __init void omap_init_32k_timer(void)
{
#ifdef CONFIG_NO_IDLE_HZ
omap_timer.dyn_tick = &omap_dyn_tick_timer;
#endif
if (cpu_class_is_omap1())
setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
omap_timer.offset = omap_32k_timer_gettimeoffset;
omap_32k_last_tick = omap_32k_sync_timer_read();
#ifdef CONFIG_ARCH_OMAP2
/* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
if (cpu_is_omap24xx()) {
gptimer = omap_dm_timer_request_specific(1);
BUG_ON(gptimer == NULL);
omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq);
omap_dm_timer_set_int_enable(gptimer,
OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW |
OMAP_TIMER_INT_MATCH);
}
#endif
omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
}
/*
* ---------------------------------------------------------------------------
* Timer initialization
* ---------------------------------------------------------------------------
*/
static void __init omap_timer_init(void)
{
#ifdef CONFIG_OMAP_DM_TIMER
omap_dm_timer_init();
#endif
omap_init_32k_timer();
}
struct sys_timer omap_timer = {
.init = omap_timer_init,
.offset = NULL, /* Initialized later */
};