a72a6f53dd
The wrapper script didn't have entries for the TQM8540 board and the SBC8548 or SBC8560 boards. I've assumed that the TQM8540 console is 8250 based and not CPM based by looking at its defconfig. There was also a trailing * on the TQM8555 entry that I removed too. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
383 lines
14 KiB
Makefile
383 lines
14 KiB
Makefile
# Makefile for making ELF bootable images for booting on CHRP
|
|
# using Open Firmware.
|
|
#
|
|
# Geert Uytterhoeven September 1997
|
|
#
|
|
# Based on coffboot by Paul Mackerras
|
|
# Simplified for ppc64 by Todd Inglett
|
|
#
|
|
# NOTE: this code is built for 32 bit in ELF32 format even though
|
|
# it packages a 64 bit kernel. We do this to simplify the
|
|
# bootloader and increase compatibility with OpenFirmware.
|
|
#
|
|
# To this end we need to define BOOTCC, etc, as the tools
|
|
# needed to build the 32 bit image. That's normally the same
|
|
# compiler for the rest of the kernel, with the -m32 flag added.
|
|
# To make it easier to setup a cross compiler,
|
|
# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE
|
|
# in the toplevel makefile.
|
|
|
|
all: $(obj)/zImage
|
|
|
|
BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
|
|
-fno-strict-aliasing -Os -msoft-float -pipe \
|
|
-fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
|
|
-isystem $(shell $(CROSS32CC) -print-file-name=include)
|
|
BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc
|
|
|
|
ifdef CONFIG_DEBUG_INFO
|
|
BOOTCFLAGS += -g
|
|
endif
|
|
|
|
ifeq ($(call cc-option-yn, -fstack-protector),y)
|
|
BOOTCFLAGS += -fno-stack-protector
|
|
endif
|
|
|
|
BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
|
|
|
|
$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
|
|
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
|
|
|
|
|
|
zlib := inffast.c inflate.c inftrees.c
|
|
zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
|
|
zliblinuxheader := zlib.h zconf.h zutil.h
|
|
|
|
$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
|
|
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
|
|
|
|
src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
|
|
src-wlib := string.S crt0.S stdio.c main.c \
|
|
$(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
|
|
ns16550.c serial.c simple_alloc.c div64.S util.S \
|
|
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
|
|
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
|
|
cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
|
|
fsl-soc.c mpc8xx.c pq2.c
|
|
src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
|
|
cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
|
|
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
|
|
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
|
|
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
|
|
fixed-head.S ep88xc.c ep405.c \
|
|
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
|
|
cuboot-warp.c cuboot-85xx-cpm2.c
|
|
src-boot := $(src-wlib) $(src-plat) empty.c
|
|
|
|
src-boot := $(addprefix $(obj)/, $(src-boot))
|
|
obj-boot := $(addsuffix .o, $(basename $(src-boot)))
|
|
obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib))))
|
|
obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat))))
|
|
|
|
quiet_cmd_copy_zlib = COPY $@
|
|
cmd_copy_zlib = sed "s@__used@@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
|
|
|
|
quiet_cmd_copy_zlibheader = COPY $@
|
|
cmd_copy_zlibheader = sed "s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
|
|
# stddef.h for NULL
|
|
quiet_cmd_copy_zliblinuxheader = COPY $@
|
|
cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]*\).*@\"\1\"@" $< > $@
|
|
|
|
$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
|
|
$(call cmd,copy_zlib)
|
|
|
|
$(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
|
|
$(call cmd,copy_zlibheader)
|
|
|
|
$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
|
|
$(call cmd,copy_zliblinuxheader)
|
|
|
|
$(obj)/empty.c:
|
|
@touch $@
|
|
|
|
$(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srctree)/$(src)/%.S
|
|
@cp $< $@
|
|
|
|
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
|
|
empty.c zImage zImage.coff.lds zImage.ps3.lds zImage.lds
|
|
|
|
quiet_cmd_bootcc = BOOTCC $@
|
|
cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
|
|
|
|
quiet_cmd_bootas = BOOTAS $@
|
|
cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<
|
|
|
|
quiet_cmd_bootar = BOOTAR $@
|
|
cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
|
|
|
|
$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
|
|
$(Q)mkdir -p $(dir $@)
|
|
$(call if_changed_dep,bootcc)
|
|
$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
|
|
$(Q)mkdir -p $(dir $@)
|
|
$(call if_changed_dep,bootas)
|
|
|
|
$(obj)/wrapper.a: $(obj-wlib) FORCE
|
|
$(call if_changed,bootar)
|
|
|
|
hostprogs-y := addnote addRamDisk hack-coff mktree dtc
|
|
|
|
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
|
|
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
|
|
$(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
|
|
|
|
dtstree := $(srctree)/$(src)/dts
|
|
|
|
wrapper :=$(srctree)/$(src)/wrapper
|
|
wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
|
|
$(wrapper) FORCE
|
|
|
|
#############
|
|
# Bits for building dtc
|
|
# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output
|
|
|
|
dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
|
|
dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
|
|
dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
|
|
|
|
# prerequisites on generated files needs to be explicit
|
|
$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
|
|
$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
|
|
|
|
HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
|
|
|
|
targets += dtc-src/dtc-parser.tab.c
|
|
targets += dtc-src/dtc-lexer.lex.c
|
|
|
|
clean-files += dtc-src/dtc-parser.tab.h
|
|
|
|
ifdef DTC_GENPARSER
|
|
BISON = bison
|
|
FLEX = flex
|
|
|
|
quiet_cmd_bison = BISON $@
|
|
cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
|
|
quiet_cmd_flex = FLEX $@
|
|
cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
|
|
|
|
$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
|
|
$(call if_changed,bison)
|
|
|
|
$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
|
|
|
|
$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
|
|
$(call if_changed,flex)
|
|
endif
|
|
|
|
#############
|
|
# Bits for building various flavours of zImage
|
|
|
|
ifneq ($(CROSS32_COMPILE),)
|
|
CROSSWRAP := -C "$(CROSS32_COMPILE)"
|
|
else
|
|
ifneq ($(CROSS_COMPILE),)
|
|
CROSSWRAP := -C "$(CROSS_COMPILE)"
|
|
endif
|
|
endif
|
|
|
|
# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd
|
|
quiet_cmd_wrap = WRAP $@
|
|
cmd_wrap =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \
|
|
$(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux
|
|
|
|
image-$(CONFIG_PPC_PSERIES) += zImage.pseries
|
|
image-$(CONFIG_PPC_MAPLE) += zImage.pseries
|
|
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
|
|
image-$(CONFIG_PPC_PS3) += dtbImage.ps3
|
|
image-$(CONFIG_PPC_CELLEB) += zImage.pseries
|
|
image-$(CONFIG_PPC_CHRP) += zImage.chrp
|
|
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
|
|
image-$(CONFIG_PPC_PMAC) += zImage.pmac
|
|
image-$(CONFIG_PPC_HOLLY) += zImage.holly
|
|
image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800
|
|
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
|
|
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
|
|
|
|
#
|
|
# Targets which embed a device tree blob
|
|
#
|
|
# Theses are default targets to build images which embed device tree blobs.
|
|
# They are only required on boards which do not have FDT support in firmware.
|
|
# Boards with newish u-boot firmare can use the uImage target above
|
|
#
|
|
|
|
# Board ports in arch/powerpc/platform/40x/Kconfig
|
|
image-$(CONFIG_EP405) += dtbImage.ep405
|
|
image-$(CONFIG_WALNUT) += treeImage.walnut
|
|
|
|
# Board ports in arch/powerpc/platform/44x/Kconfig
|
|
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
|
|
image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo
|
|
image-$(CONFIG_SEQUOIA) += cuImage.sequoia
|
|
image-$(CONFIG_RAINIER) += cuImage.rainier
|
|
image-$(CONFIG_TAISHAN) += cuImage.taishan
|
|
image-$(CONFIG_KATMAI) += cuImage.katmai
|
|
image-$(CONFIG_WARP) += cuImage.warp
|
|
|
|
# Board ports in arch/powerpc/platform/8xx/Kconfig
|
|
image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads
|
|
image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads
|
|
image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc
|
|
image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
|
|
dtbImage.adder875-redboot
|
|
|
|
# Board ports in arch/powerpc/platform/52xx/Kconfig
|
|
image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b
|
|
|
|
# Board ports in arch/powerpc/platform/82xx/Kconfig
|
|
image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads
|
|
image-$(CONFIG_PQ2FADS) += cuImage.pq2fads
|
|
image-$(CONFIG_EP8248E) += dtbImage.ep8248e
|
|
|
|
# Board ports in arch/powerpc/platform/83xx/Kconfig
|
|
image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds
|
|
image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb
|
|
image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \
|
|
cuImage.mpc8349emitxgp
|
|
image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds
|
|
image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds
|
|
|
|
# Board ports in arch/powerpc/platform/85xx/Kconfig
|
|
image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads
|
|
image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads
|
|
image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \
|
|
cuImage.mpc8548cds \
|
|
cuImage.mpc8555cds
|
|
image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds
|
|
image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \
|
|
cuImage.mpc8572ds
|
|
image-$(CONFIG_TQM8540) += cuImage.tqm8540
|
|
image-$(CONFIG_TQM8541) += cuImage.tqm8541
|
|
image-$(CONFIG_TQM8555) += cuImage.tqm8555
|
|
image-$(CONFIG_TQM8560) += cuImage.tqm8560
|
|
image-$(CONFIG_SBC8548) += cuImage.sbc8548
|
|
image-$(CONFIG_SBC8560) += cuImage.sbc8560
|
|
|
|
# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
|
|
image-$(CONFIG_STORCENTER) += cuImage.storcenter
|
|
image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
|
|
|
|
# For 32-bit powermacs, build the COFF and miboot images
|
|
# as well as the ELF images.
|
|
ifeq ($(CONFIG_PPC32),y)
|
|
image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot
|
|
endif
|
|
|
|
initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
|
|
initrd-y := $(patsubst zImage%, zImage.initrd%, \
|
|
$(patsubst dtbImage%, dtbImage.initrd%, \
|
|
$(patsubst treeImage%, treeImage.initrd%, $(image-y))))
|
|
initrd-y := $(filter-out $(image-y), $(initrd-y))
|
|
targets += $(image-y) $(initrd-y)
|
|
|
|
$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz
|
|
|
|
# Don't put the ramdisk on the pattern rule; when its missing make will try
|
|
# the pattern rule with less dependencies that also matches (even with the
|
|
# hard dependency listed).
|
|
$(obj)/zImage.initrd.%: vmlinux $(wrapperbits)
|
|
$(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz)
|
|
|
|
$(obj)/zImage.%: vmlinux $(wrapperbits)
|
|
$(call if_changed,wrap,$*)
|
|
|
|
# dtbImage% - a dtbImage is a zImage with an embedded device tree blob
|
|
$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
|
|
$(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
|
|
|
|
$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(dtstree)/%.dts
|
|
$(call if_changed,wrap,$*,$(dtstree)/$*.dts)
|
|
|
|
# This cannot be in the root of $(src) as the zImage rule always adds a $(obj)
|
|
# prefix
|
|
$(obj)/vmlinux.strip: vmlinux
|
|
$(STRIP) -s -R .comment $< -o $@
|
|
|
|
$(obj)/zImage.iseries: vmlinux
|
|
$(STRIP) -s -R .comment $< -o $@
|
|
|
|
$(obj)/uImage: vmlinux $(wrapperbits)
|
|
$(call if_changed,wrap,uboot)
|
|
|
|
$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
|
|
$(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts)
|
|
|
|
$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
|
|
$(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz)
|
|
|
|
$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits)
|
|
$(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts)
|
|
|
|
# If there isn't a platform selected then just strip the vmlinux.
|
|
ifeq (,$(image-y))
|
|
image-y := vmlinux.strip
|
|
endif
|
|
|
|
$(obj)/zImage: $(addprefix $(obj)/, $(image-y))
|
|
@rm -f $@; ln $< $@
|
|
$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y))
|
|
@rm -f $@; ln $< $@
|
|
|
|
install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
|
|
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
|
|
|
|
# anything not in $(targets)
|
|
clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
|
|
otheros.bld
|
|
|
|
# clean up files cached by wrapper
|
|
clean-kernel := vmlinux.strip vmlinux.bin
|
|
clean-kernel += $(addsuffix .gz,$(clean-kernel))
|
|
# If not absolute clean-files are relative to $(obj).
|
|
clean-files += $(addprefix $(objtree)/, $(clean-kernel))
|
|
|
|
WRAPPER_OBJDIR := /usr/lib/kernel-wrapper
|
|
WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
|
|
WRAPPER_BINDIR := /usr/sbin
|
|
INSTALL := install
|
|
|
|
extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
|
|
hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
|
|
wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
|
|
dts-installed := $(patsubst $(obj)/dts/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(obj)/dts/*.dts))
|
|
|
|
all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed)
|
|
|
|
quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@)
|
|
cmd_mkdir = mkdir -p $@
|
|
|
|
quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@)
|
|
cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@
|
|
|
|
quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@)
|
|
cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@
|
|
|
|
quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
|
|
cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@
|
|
|
|
quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@)
|
|
cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\
|
|
sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \
|
|
-e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \
|
|
|
|
|
|
$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR):
|
|
$(call cmd,mkdir)
|
|
|
|
$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR)
|
|
$(call cmd,install)
|
|
|
|
$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR)
|
|
$(call cmd,install_exe)
|
|
|
|
$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR)
|
|
$(call cmd,install_dts)
|
|
|
|
$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR)
|
|
$(call cmd,install_wrapper)
|
|
|
|
$(obj)/bootwrapper_install: $(all-installed)
|
|
|