cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
366 lines
9 KiB
C
366 lines
9 KiB
C
/*======================================================================
|
|
|
|
$Id: slram.c,v 1.36 2005/11/07 11:14:25 gleixner Exp $
|
|
|
|
This driver provides a method to access memory not used by the kernel
|
|
itself (i.e. if the kernel commandline mem=xxx is used). To actually
|
|
use slram at least mtdblock or mtdchar is required (for block or
|
|
character device access).
|
|
|
|
Usage:
|
|
|
|
if compiled as loadable module:
|
|
modprobe slram map=<name>,<start>,<end/offset>
|
|
if statically linked into the kernel use the following kernel cmd.line
|
|
slram=<name>,<start>,<end/offset>
|
|
|
|
<name>: name of the device that will be listed in /proc/mtd
|
|
<start>: start of the memory region, decimal or hex (0xabcdef)
|
|
<end/offset>: end of the memory region. It's possible to use +0x1234
|
|
to specify the offset instead of the absolute address
|
|
|
|
NOTE:
|
|
With slram it's only possible to map a contigous memory region. Therfore
|
|
if there's a device mapped somewhere in the region specified slram will
|
|
fail to load (see kernel log if modprobe fails).
|
|
|
|
-
|
|
|
|
Jochen Schaeuble <psionic@psionic.de>
|
|
|
|
======================================================================*/
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/major.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/init.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
|
|
#define SLRAM_MAX_DEVICES_PARAMS 6 /* 3 parameters / device */
|
|
#define SLRAM_BLK_SZ 0x4000
|
|
|
|
#define T(fmt, args...) printk(KERN_DEBUG fmt, ## args)
|
|
#define E(fmt, args...) printk(KERN_NOTICE fmt, ## args)
|
|
|
|
typedef struct slram_priv {
|
|
u_char *start;
|
|
u_char *end;
|
|
} slram_priv_t;
|
|
|
|
typedef struct slram_mtd_list {
|
|
struct mtd_info *mtdinfo;
|
|
struct slram_mtd_list *next;
|
|
} slram_mtd_list_t;
|
|
|
|
#ifdef MODULE
|
|
static char *map[SLRAM_MAX_DEVICES_PARAMS];
|
|
|
|
module_param_array(map, charp, NULL, 0);
|
|
MODULE_PARM_DESC(map, "List of memory regions to map. \"map=<name>, <start>, <length / end>\"");
|
|
#else
|
|
static char *map;
|
|
#endif
|
|
|
|
static slram_mtd_list_t *slram_mtdlist = NULL;
|
|
|
|
static int slram_erase(struct mtd_info *, struct erase_info *);
|
|
static int slram_point(struct mtd_info *, loff_t, size_t, size_t *, u_char **);
|
|
static void slram_unpoint(struct mtd_info *, u_char *, loff_t, size_t);
|
|
static int slram_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *);
|
|
static int slram_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
|
|
|
|
static int slram_erase(struct mtd_info *mtd, struct erase_info *instr)
|
|
{
|
|
slram_priv_t *priv = mtd->priv;
|
|
|
|
if (instr->addr + instr->len > mtd->size) {
|
|
return(-EINVAL);
|
|
}
|
|
|
|
memset(priv->start + instr->addr, 0xff, instr->len);
|
|
|
|
/* This'll catch a few races. Free the thing before returning :)
|
|
* I don't feel at all ashamed. This kind of thing is possible anyway
|
|
* with flash, but unlikely.
|
|
*/
|
|
|
|
instr->state = MTD_ERASE_DONE;
|
|
|
|
mtd_erase_callback(instr);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static int slram_point(struct mtd_info *mtd, loff_t from, size_t len,
|
|
size_t *retlen, u_char **mtdbuf)
|
|
{
|
|
slram_priv_t *priv = mtd->priv;
|
|
|
|
if (from + len > mtd->size)
|
|
return -EINVAL;
|
|
|
|
*mtdbuf = priv->start + from;
|
|
*retlen = len;
|
|
return(0);
|
|
}
|
|
|
|
static void slram_unpoint(struct mtd_info *mtd, u_char *addr, loff_t from, size_t len)
|
|
{
|
|
}
|
|
|
|
static int slram_read(struct mtd_info *mtd, loff_t from, size_t len,
|
|
size_t *retlen, u_char *buf)
|
|
{
|
|
slram_priv_t *priv = mtd->priv;
|
|
|
|
if (from > mtd->size)
|
|
return -EINVAL;
|
|
|
|
if (from + len > mtd->size)
|
|
len = mtd->size - from;
|
|
|
|
memcpy(buf, priv->start + from, len);
|
|
|
|
*retlen = len;
|
|
return(0);
|
|
}
|
|
|
|
static int slram_write(struct mtd_info *mtd, loff_t to, size_t len,
|
|
size_t *retlen, const u_char *buf)
|
|
{
|
|
slram_priv_t *priv = mtd->priv;
|
|
|
|
if (to + len > mtd->size)
|
|
return -EINVAL;
|
|
|
|
memcpy(priv->start + to, buf, len);
|
|
|
|
*retlen = len;
|
|
return(0);
|
|
}
|
|
|
|
/*====================================================================*/
|
|
|
|
static int register_device(char *name, unsigned long start, unsigned long length)
|
|
{
|
|
slram_mtd_list_t **curmtd;
|
|
|
|
curmtd = &slram_mtdlist;
|
|
while (*curmtd) {
|
|
curmtd = &(*curmtd)->next;
|
|
}
|
|
|
|
*curmtd = kmalloc(sizeof(slram_mtd_list_t), GFP_KERNEL);
|
|
if (!(*curmtd)) {
|
|
E("slram: Cannot allocate new MTD device.\n");
|
|
return(-ENOMEM);
|
|
}
|
|
(*curmtd)->mtdinfo = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
|
|
(*curmtd)->next = NULL;
|
|
|
|
if ((*curmtd)->mtdinfo) {
|
|
(*curmtd)->mtdinfo->priv =
|
|
kzalloc(sizeof(slram_priv_t), GFP_KERNEL);
|
|
|
|
if (!(*curmtd)->mtdinfo->priv) {
|
|
kfree((*curmtd)->mtdinfo);
|
|
(*curmtd)->mtdinfo = NULL;
|
|
}
|
|
}
|
|
|
|
if (!(*curmtd)->mtdinfo) {
|
|
E("slram: Cannot allocate new MTD device.\n");
|
|
return(-ENOMEM);
|
|
}
|
|
|
|
if (!(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start =
|
|
ioremap(start, length))) {
|
|
E("slram: ioremap failed\n");
|
|
return -EIO;
|
|
}
|
|
((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end =
|
|
((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start + length;
|
|
|
|
|
|
(*curmtd)->mtdinfo->name = name;
|
|
(*curmtd)->mtdinfo->size = length;
|
|
(*curmtd)->mtdinfo->flags = MTD_CAP_RAM;
|
|
(*curmtd)->mtdinfo->erase = slram_erase;
|
|
(*curmtd)->mtdinfo->point = slram_point;
|
|
(*curmtd)->mtdinfo->unpoint = slram_unpoint;
|
|
(*curmtd)->mtdinfo->read = slram_read;
|
|
(*curmtd)->mtdinfo->write = slram_write;
|
|
(*curmtd)->mtdinfo->owner = THIS_MODULE;
|
|
(*curmtd)->mtdinfo->type = MTD_RAM;
|
|
(*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ;
|
|
(*curmtd)->mtdinfo->writesize = 1;
|
|
|
|
if (add_mtd_device((*curmtd)->mtdinfo)) {
|
|
E("slram: Failed to register new device\n");
|
|
iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start);
|
|
kfree((*curmtd)->mtdinfo->priv);
|
|
kfree((*curmtd)->mtdinfo);
|
|
return(-EAGAIN);
|
|
}
|
|
T("slram: Registered device %s from %luKiB to %luKiB\n", name,
|
|
(start / 1024), ((start + length) / 1024));
|
|
T("slram: Mapped from 0x%p to 0x%p\n",
|
|
((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start,
|
|
((slram_priv_t *)(*curmtd)->mtdinfo->priv)->end);
|
|
return(0);
|
|
}
|
|
|
|
static void unregister_devices(void)
|
|
{
|
|
slram_mtd_list_t *nextitem;
|
|
|
|
while (slram_mtdlist) {
|
|
nextitem = slram_mtdlist->next;
|
|
del_mtd_device(slram_mtdlist->mtdinfo);
|
|
iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start);
|
|
kfree(slram_mtdlist->mtdinfo->priv);
|
|
kfree(slram_mtdlist->mtdinfo);
|
|
kfree(slram_mtdlist);
|
|
slram_mtdlist = nextitem;
|
|
}
|
|
}
|
|
|
|
static unsigned long handle_unit(unsigned long value, char *unit)
|
|
{
|
|
if ((*unit == 'M') || (*unit == 'm')) {
|
|
return(value * 1024 * 1024);
|
|
} else if ((*unit == 'K') || (*unit == 'k')) {
|
|
return(value * 1024);
|
|
}
|
|
return(value);
|
|
}
|
|
|
|
static int parse_cmdline(char *devname, char *szstart, char *szlength)
|
|
{
|
|
char *buffer;
|
|
unsigned long devstart;
|
|
unsigned long devlength;
|
|
|
|
if ((!devname) || (!szstart) || (!szlength)) {
|
|
unregister_devices();
|
|
return(-EINVAL);
|
|
}
|
|
|
|
devstart = simple_strtoul(szstart, &buffer, 0);
|
|
devstart = handle_unit(devstart, buffer);
|
|
|
|
if (*(szlength) != '+') {
|
|
devlength = simple_strtoul(szlength, &buffer, 0);
|
|
devlength = handle_unit(devlength, buffer) - devstart;
|
|
} else {
|
|
devlength = simple_strtoul(szlength + 1, &buffer, 0);
|
|
devlength = handle_unit(devlength, buffer);
|
|
}
|
|
T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n",
|
|
devname, devstart, devlength);
|
|
if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) {
|
|
E("slram: Illegal start / length parameter.\n");
|
|
return(-EINVAL);
|
|
}
|
|
|
|
if ((devstart = register_device(devname, devstart, devlength))){
|
|
unregister_devices();
|
|
return((int)devstart);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
#ifndef MODULE
|
|
|
|
static int __init mtd_slram_setup(char *str)
|
|
{
|
|
map = str;
|
|
return(1);
|
|
}
|
|
|
|
__setup("slram=", mtd_slram_setup);
|
|
|
|
#endif
|
|
|
|
static int init_slram(void)
|
|
{
|
|
char *devname;
|
|
int i;
|
|
|
|
#ifndef MODULE
|
|
char *devstart;
|
|
char *devlength;
|
|
|
|
i = 0;
|
|
|
|
if (!map) {
|
|
E("slram: not enough parameters.\n");
|
|
return(-EINVAL);
|
|
}
|
|
while (map) {
|
|
devname = devstart = devlength = NULL;
|
|
|
|
if (!(devname = strsep(&map, ","))) {
|
|
E("slram: No devicename specified.\n");
|
|
break;
|
|
}
|
|
T("slram: devname = %s\n", devname);
|
|
if ((!map) || (!(devstart = strsep(&map, ",")))) {
|
|
E("slram: No devicestart specified.\n");
|
|
}
|
|
T("slram: devstart = %s\n", devstart);
|
|
if ((!map) || (!(devlength = strsep(&map, ",")))) {
|
|
E("slram: No devicelength / -end specified.\n");
|
|
}
|
|
T("slram: devlength = %s\n", devlength);
|
|
if (parse_cmdline(devname, devstart, devlength) != 0) {
|
|
return(-EINVAL);
|
|
}
|
|
}
|
|
#else
|
|
int count;
|
|
|
|
for (count = 0; (map[count]) && (count < SLRAM_MAX_DEVICES_PARAMS);
|
|
count++) {
|
|
}
|
|
|
|
if ((count % 3 != 0) || (count == 0)) {
|
|
E("slram: not enough parameters.\n");
|
|
return(-EINVAL);
|
|
}
|
|
for (i = 0; i < (count / 3); i++) {
|
|
devname = map[i * 3];
|
|
|
|
if (parse_cmdline(devname, map[i * 3 + 1], map[i * 3 + 2])!=0) {
|
|
return(-EINVAL);
|
|
}
|
|
|
|
}
|
|
#endif /* !MODULE */
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void __exit cleanup_slram(void)
|
|
{
|
|
unregister_devices();
|
|
}
|
|
|
|
module_init(init_slram);
|
|
module_exit(cleanup_slram);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Jochen Schaeuble <psionic@psionic.de>");
|
|
MODULE_DESCRIPTION("MTD driver for uncached system RAM");
|