android_kernel_motorola_sm6225/drivers/usb
Boris BREZILLON c0aefc75ce usb: gadget: at91_udc: add usb_clk for transition to common clk framework
The AT91 PMC (Power Management Controller) provides an USB clock used by
USB Full Speed host (ohci) and USB Full Speed device (udc).
The usb drivers (ohci and udc) must configure this clock to 48Mhz.
This configuration was formely done in mach-at91/clock.c, but this
implementation will be removed when moving to common clk framework.

This patch adds support for usb clock retrieval and configuration, and is
backward compatible with the current at91 clk implementation (if usb clk
is not found, it does not configure/enable it).

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-02 15:17:03 +03:00
..
atm drivers: avoid parsing names as kthread_run() format strings 2013-07-03 16:07:41 -07:00
c67x00 usb: c67x00 RetryCnt value in c67x00 TD should be 3 2013-03-07 12:31:37 +08:00
chipidea Device tree updates for v3.11 2013-07-04 15:51:45 -07:00
class USB: cdc-acm: remove unneeded spin_lock_irqsave/restore on write path 2013-06-17 13:37:07 -07:00
core usb: Clear both buffers when clearing a control transfer TT buffer. 2013-07-25 11:37:13 -07:00
dwc3 usb: dwc3: pci: add CONFIG_PM_SLEEP to suspend/resume functions 2013-08-02 11:19:49 +03:00
early
gadget usb: gadget: at91_udc: add usb_clk for transition to common clk framework 2013-08-02 15:17:03 +03:00
host usb: host: tegra: Locate a PHY via standard API 2013-07-29 13:58:25 +03:00
image USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
misc USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga 2013-07-22 11:29:26 -07:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb usb: musb: use dev_get_platdata() 2013-07-30 11:21:54 +03:00
phy usb: phy: use dev_get_platdata() 2013-07-30 11:18:53 +03:00
renesas_usbhs usb: renesas: use dev_get_platdata() 2013-07-30 11:21:58 +03:00
serial USB: mos7840: fix memory leak in open 2013-07-25 11:30:17 -07:00
storage USB: storage: Add MicroVault Flash Drive to unusual_devs 2013-07-22 11:29:26 -07:00
wusbcore USB: HWA: fix device probe failure 2013-06-24 16:20:43 -07:00
Kconfig USB: Check for ARCH_EXYNOS separately 2013-06-19 01:25:48 +09:00
Makefile usb: phy: make PHY driver selection possible by controller drivers 2013-07-29 13:57:05 +03:00
README
usb-common.c usb: common: introduce of_usb_get_maximum_speed() 2013-07-29 13:56:46 +03:00
usb-skeleton.c USB: usb-skeleton.c: fix blocked forever in skel_read 2013-03-25 13:32:20 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.