asgardius/android_kernel_motorola_sm6225
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
android_kernel_motorola_sm6225/include/asm-sh/r7780rp.h
Paul Mundt c2a560f533 sh: Add some missing board headers. 
Some of these were dropped in the header directory rework, add
the few missing ones back in.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 17:31:22 +09:00

173 lines
9.3 KiB
C
Raw Blame History

#ifndef __ASM_SH_RENESAS_R7780RP_H
#define __ASM_SH_RENESAS_R7780RP_H
/*
* linux/include/asm-sh/r7780rp.h
*
* Copyright (C) 2000 Atom Create Engineering Co., Ltd.
*
* Renesas Solutions Highlander R7780RP support
*/
/* Box specific addresses. */
#if defined(CONFIG_SH_R7780MP)
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */
#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
#define PA_ICCR (PA_BCR+0x0600) /* Serial control */
#define PA_SAR (PA_BCR+0x0602) /* Serial Slave control */
#define PA_MDR (PA_BCR+0x0604) /* Serial Mode control */
#define PA_ADR1 (PA_BCR+0x0606) /* Serial Address1 control */
#define PA_DAR1 (PA_BCR+0x0646) /* Serial Data1 control */
#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
#define PA_PMR (PA_BCR+0x0900) /* */
#define PA_AX88796L 0xa4100400 /* AX88796L Area */
#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */
#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */
#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */
#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */
#define IRQ_CFCARD 1 /* CF Card IRQ */
// #define IRQ_CFINST 0 /* CF Card Insert IRQ */
#define IRQ_TP 2 /* Touch Panel IRQ */
#define IRQ_SCI1 3 /* SCI1 IRQ */
#define IRQ_SCI0 4 /* SCI0 IRQ */
#define IRQ_2SERIAL 5 /* Serial IRQ */
#define IRQ_RTC 6 /* RTC A / B IRQ */
#define IRQ_EXTENTION6 7 /* EXT6n IRQ */
#define IRQ_EXTENTION5 8 /* EXT5n IRQ */
#define IRQ_EXTENTION4 9 /* EXT4n IRQ */
#define IRQ_EXTENTION2 10 /* EXT2n IRQ */
#define IRQ_EXTENTION1 11 /* EXT1n IRQ */
#define IRQ_ONETH 13 /* On board Ethernet IRQ */
#define IRQ_PSW 14 /* Push Switch IRQ */
#else /* R7780RP */
#define PA_BCR 0xa5000000 /* FPGA */
#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */
#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
#define PA_ICCR (PA_BCR+0x0500) /* Serial control */
#define PA_SAR (PA_BCR+0x0502) /* Serial Slave control */
#define PA_MDR (PA_BCR+0x0504) /* Serial Mode control */
#define PA_ADR1 (PA_BCR+0x0506) /* Serial Address1 control */
#define PA_DAR1 (PA_BCR+0x0546) /* Serial Data1 control */
#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
#define PA_AX88796L 0xa5800400 /* AX88796L Area */
#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IRQ_PCISLOT1 0 /* PCI Slot #1 IRQ */
#define IRQ_PCISLOT2 1 /* PCI Slot #2 IRQ */
#define IRQ_PCISLOT3 2 /* PCI Slot #3 IRQ */
#define IRQ_PCISLOT4 3 /* PCI Slot #4 IRQ */
#define IRQ_CFCARD 4 /* CF Card IRQ */
#define IRQ_CFINST 5 /* CF Card Insert IRQ */
#define IRQ_M66596 6 /* M66596 IRQ */
#define IRQ_SDCARD 7 /* SD Card IRQ */
#define IRQ_TUCHPANEL 8 /* Touch Panel IRQ */
#define IRQ_SCI 9 /* SCI IRQ */
#define IRQ_2SERIAL 10 /* Serial IRQ */
#define IRQ_EXTENTION 11 /* EXTn IRQ */
#define IRQ_ONETH 12 /* On board Ethernet IRQ */
#define IRQ_PSW 13 /* Push Switch IRQ */
#define IRQ_ZIGBEE 14 /* Ziggbee IO IRQ */
#endif /* CONFIG_SH_R7780MP */
#define __IO_PREFIX r7780rp
#include <asm/io_generic.h>
#endif /* __ASM_SH_RENESAS_R7780RP */
Reference in a new issue View git blame Copy permalink