c1821c2e97
This provides a noexec protection on s390 hardware. Our hardware does not have any bits left in the pte for a hw noexec bit, so this is a different approach using shadow page tables and a special addressing mode that allows separate address spaces for code and data. As a special feature of our "secondary-space" addressing mode, separate page tables can be specified for the translation of data addresses (storage operands) and instruction addresses. The shadow page table is used for the instruction addresses and the standard page table for the data addresses. The shadow page table is linked to the standard page table by a pointer in page->lru.next of the struct page corresponding to the page that contains the standard page table (since page->private is not really private with the pte_lock and the page table pages are not in the LRU list). Depending on the software bits of a pte, it is either inserted into both page tables or just into the standard (data) page table. Pages of a vma that does not have the VM_EXEC bit set get mapped only in the data address space. Any try to execute code on such a page will cause a page translation exception. The standard reaction to this is a SIGSEGV with two exceptions: the two system call opcodes 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) are allowed. They are stored by the kernel to the signal stack frame. Unfortunately, the signal return mechanism cannot be modified to use an SA_RESTORER because the exception unwinding code depends on the system call opcode stored behind the signal stack frame. This feature requires that user space is executed in secondary-space mode and the kernel in home-space mode, which means that the addressing modes need to be switched and that the noexec protection only works for user space. After switching the addressing modes, we cannot use the mvcp/mvcs instructions anymore to copy between kernel and user space. A new mvcos instruction has been added to the z9 EC/BC hardware which allows to copy between arbitrary address spaces, but on older hardware the page tables need to be walked manually. Signed-off-by: Gerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
609 lines
16 KiB
C
609 lines
16 KiB
C
/*
|
|
* arch/s390/mm/fault.c
|
|
*
|
|
* S390 version
|
|
* Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
|
|
* Author(s): Hartmut Penner (hp@de.ibm.com)
|
|
* Ulrich Weigand (uweigand@de.ibm.com)
|
|
*
|
|
* Derived from "arch/i386/mm/fault.c"
|
|
* Copyright (C) 1995 Linus Torvalds
|
|
*/
|
|
|
|
#include <linux/signal.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/types.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/mman.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/module.h>
|
|
#include <linux/hardirq.h>
|
|
#include <linux/kprobes.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/kdebug.h>
|
|
#include <asm/s390_ext.h>
|
|
|
|
#ifndef CONFIG_64BIT
|
|
#define __FAIL_ADDR_MASK 0x7ffff000
|
|
#define __FIXUP_MASK 0x7fffffff
|
|
#define __SUBCODE_MASK 0x0200
|
|
#define __PF_RES_FIELD 0ULL
|
|
#else /* CONFIG_64BIT */
|
|
#define __FAIL_ADDR_MASK -4096L
|
|
#define __FIXUP_MASK ~0L
|
|
#define __SUBCODE_MASK 0x0600
|
|
#define __PF_RES_FIELD 0x8000000000000000ULL
|
|
#endif /* CONFIG_64BIT */
|
|
|
|
#ifdef CONFIG_SYSCTL
|
|
extern int sysctl_userprocess_debug;
|
|
#endif
|
|
|
|
extern void die(const char *,struct pt_regs *,long);
|
|
|
|
#ifdef CONFIG_KPROBES
|
|
static ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
|
|
int register_page_fault_notifier(struct notifier_block *nb)
|
|
{
|
|
return atomic_notifier_chain_register(¬ify_page_fault_chain, nb);
|
|
}
|
|
|
|
int unregister_page_fault_notifier(struct notifier_block *nb)
|
|
{
|
|
return atomic_notifier_chain_unregister(¬ify_page_fault_chain, nb);
|
|
}
|
|
|
|
static inline int notify_page_fault(enum die_val val, const char *str,
|
|
struct pt_regs *regs, long err, int trap, int sig)
|
|
{
|
|
struct die_args args = {
|
|
.regs = regs,
|
|
.str = str,
|
|
.err = err,
|
|
.trapnr = trap,
|
|
.signr = sig
|
|
};
|
|
return atomic_notifier_call_chain(¬ify_page_fault_chain, val, &args);
|
|
}
|
|
#else
|
|
static inline int notify_page_fault(enum die_val val, const char *str,
|
|
struct pt_regs *regs, long err, int trap, int sig)
|
|
{
|
|
return NOTIFY_DONE;
|
|
}
|
|
#endif
|
|
|
|
extern spinlock_t timerlist_lock;
|
|
|
|
/*
|
|
* Unlock any spinlocks which will prevent us from getting the
|
|
* message out (timerlist_lock is acquired through the
|
|
* console unblank code)
|
|
*/
|
|
void bust_spinlocks(int yes)
|
|
{
|
|
if (yes) {
|
|
oops_in_progress = 1;
|
|
} else {
|
|
int loglevel_save = console_loglevel;
|
|
console_unblank();
|
|
oops_in_progress = 0;
|
|
/*
|
|
* OK, the message is on the console. Now we call printk()
|
|
* without oops_in_progress set so that printk will give klogd
|
|
* a poke. Hold onto your hats...
|
|
*/
|
|
console_loglevel = 15;
|
|
printk(" ");
|
|
console_loglevel = loglevel_save;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check which address space is addressed by the access
|
|
* register in S390_lowcore.exc_access_id.
|
|
* Returns 1 for user space and 0 for kernel space.
|
|
*/
|
|
static int __check_access_register(struct pt_regs *regs, int error_code)
|
|
{
|
|
int areg = S390_lowcore.exc_access_id;
|
|
|
|
if (areg == 0)
|
|
/* Access via access register 0 -> kernel address */
|
|
return 0;
|
|
save_access_regs(current->thread.acrs);
|
|
if (regs && areg < NUM_ACRS && current->thread.acrs[areg] <= 1)
|
|
/*
|
|
* access register contains 0 -> kernel address,
|
|
* access register contains 1 -> user space address
|
|
*/
|
|
return current->thread.acrs[areg];
|
|
|
|
/* Something unhealthy was done with the access registers... */
|
|
die("page fault via unknown access register", regs, error_code);
|
|
do_exit(SIGKILL);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check which address space the address belongs to.
|
|
* May return 1 or 2 for user space and 0 for kernel space.
|
|
* Returns 2 for user space in primary addressing mode with
|
|
* CONFIG_S390_EXEC_PROTECT on and kernel parameter noexec=on.
|
|
*/
|
|
static inline int check_user_space(struct pt_regs *regs, int error_code)
|
|
{
|
|
/*
|
|
* The lowest two bits of S390_lowcore.trans_exc_code indicate
|
|
* which paging table was used:
|
|
* 0: Primary Segment Table Descriptor
|
|
* 1: STD determined via access register
|
|
* 2: Secondary Segment Table Descriptor
|
|
* 3: Home Segment Table Descriptor
|
|
*/
|
|
int descriptor = S390_lowcore.trans_exc_code & 3;
|
|
if (unlikely(descriptor == 1))
|
|
return __check_access_register(regs, error_code);
|
|
if (descriptor == 2)
|
|
return current->thread.mm_segment.ar4;
|
|
return ((descriptor != 0) ^ (switch_amode)) << s390_noexec;
|
|
}
|
|
|
|
/*
|
|
* Send SIGSEGV to task. This is an external routine
|
|
* to keep the stack usage of do_page_fault small.
|
|
*/
|
|
static void do_sigsegv(struct pt_regs *regs, unsigned long error_code,
|
|
int si_code, unsigned long address)
|
|
{
|
|
struct siginfo si;
|
|
|
|
#if defined(CONFIG_SYSCTL) || defined(CONFIG_PROCESS_DEBUG)
|
|
#if defined(CONFIG_SYSCTL)
|
|
if (sysctl_userprocess_debug)
|
|
#endif
|
|
{
|
|
printk("User process fault: interruption code 0x%lX\n",
|
|
error_code);
|
|
printk("failing address: %lX\n", address);
|
|
show_regs(regs);
|
|
}
|
|
#endif
|
|
si.si_signo = SIGSEGV;
|
|
si.si_code = si_code;
|
|
si.si_addr = (void __user *) address;
|
|
force_sig_info(SIGSEGV, &si, current);
|
|
}
|
|
|
|
#ifdef CONFIG_S390_EXEC_PROTECT
|
|
extern long sys_sigreturn(struct pt_regs *regs);
|
|
extern long sys_rt_sigreturn(struct pt_regs *regs);
|
|
extern long sys32_sigreturn(struct pt_regs *regs);
|
|
extern long sys32_rt_sigreturn(struct pt_regs *regs);
|
|
|
|
static inline void do_sigreturn(struct mm_struct *mm, struct pt_regs *regs,
|
|
int rt)
|
|
{
|
|
up_read(&mm->mmap_sem);
|
|
clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
|
|
#ifdef CONFIG_COMPAT
|
|
if (test_tsk_thread_flag(current, TIF_31BIT)) {
|
|
if (rt)
|
|
sys32_rt_sigreturn(regs);
|
|
else
|
|
sys32_sigreturn(regs);
|
|
return;
|
|
}
|
|
#endif /* CONFIG_COMPAT */
|
|
if (rt)
|
|
sys_rt_sigreturn(regs);
|
|
else
|
|
sys_sigreturn(regs);
|
|
return;
|
|
}
|
|
|
|
static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
|
|
unsigned long address, unsigned long error_code)
|
|
{
|
|
pgd_t *pgd;
|
|
pmd_t *pmd;
|
|
pte_t *pte;
|
|
u16 *instruction;
|
|
unsigned long pfn, uaddr = regs->psw.addr;
|
|
|
|
spin_lock(&mm->page_table_lock);
|
|
pgd = pgd_offset(mm, uaddr);
|
|
if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
|
|
goto out_fault;
|
|
pmd = pmd_offset(pgd, uaddr);
|
|
if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
|
|
goto out_fault;
|
|
pte = pte_offset_map(pmd_offset(pgd_offset(mm, uaddr), uaddr), uaddr);
|
|
if (!pte || !pte_present(*pte))
|
|
goto out_fault;
|
|
pfn = pte_pfn(*pte);
|
|
if (!pfn_valid(pfn))
|
|
goto out_fault;
|
|
spin_unlock(&mm->page_table_lock);
|
|
|
|
instruction = (u16 *) ((pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE-1)));
|
|
if (*instruction == 0x0a77)
|
|
do_sigreturn(mm, regs, 0);
|
|
else if (*instruction == 0x0aad)
|
|
do_sigreturn(mm, regs, 1);
|
|
else {
|
|
printk("- XXX - do_exception: task = %s, primary, NO EXEC "
|
|
"-> SIGSEGV\n", current->comm);
|
|
up_read(&mm->mmap_sem);
|
|
current->thread.prot_addr = address;
|
|
current->thread.trap_no = error_code;
|
|
do_sigsegv(regs, error_code, SEGV_MAPERR, address);
|
|
}
|
|
return 0;
|
|
out_fault:
|
|
spin_unlock(&mm->page_table_lock);
|
|
return -EFAULT;
|
|
}
|
|
#endif /* CONFIG_S390_EXEC_PROTECT */
|
|
|
|
/*
|
|
* This routine handles page faults. It determines the address,
|
|
* and the problem, and then passes it off to one of the appropriate
|
|
* routines.
|
|
*
|
|
* error_code:
|
|
* 04 Protection -> Write-Protection (suprression)
|
|
* 10 Segment translation -> Not present (nullification)
|
|
* 11 Page translation -> Not present (nullification)
|
|
* 3b Region third trans. -> Not present (nullification)
|
|
*/
|
|
static inline void __kprobes
|
|
do_exception(struct pt_regs *regs, unsigned long error_code, int is_protection)
|
|
{
|
|
struct task_struct *tsk;
|
|
struct mm_struct *mm;
|
|
struct vm_area_struct * vma;
|
|
unsigned long address;
|
|
int user_address;
|
|
const struct exception_table_entry *fixup;
|
|
int si_code = SEGV_MAPERR;
|
|
|
|
tsk = current;
|
|
mm = tsk->mm;
|
|
|
|
if (notify_page_fault(DIE_PAGE_FAULT, "page fault", regs, error_code, 14,
|
|
SIGSEGV) == NOTIFY_STOP)
|
|
return;
|
|
|
|
/*
|
|
* Check for low-address protection. This needs to be treated
|
|
* as a special case because the translation exception code
|
|
* field is not guaranteed to contain valid data in this case.
|
|
*/
|
|
if (is_protection && !(S390_lowcore.trans_exc_code & 4)) {
|
|
|
|
/* Low-address protection hit in kernel mode means
|
|
NULL pointer write access in kernel mode. */
|
|
if (!(regs->psw.mask & PSW_MASK_PSTATE)) {
|
|
address = 0;
|
|
user_address = 0;
|
|
goto no_context;
|
|
}
|
|
|
|
/* Low-address protection hit in user mode 'cannot happen'. */
|
|
die ("Low-address protection", regs, error_code);
|
|
do_exit(SIGKILL);
|
|
}
|
|
|
|
/*
|
|
* get the failing address
|
|
* more specific the segment and page table portion of
|
|
* the address
|
|
*/
|
|
address = S390_lowcore.trans_exc_code & __FAIL_ADDR_MASK;
|
|
user_address = check_user_space(regs, error_code);
|
|
|
|
/*
|
|
* Verify that the fault happened in user space, that
|
|
* we are not in an interrupt and that there is a
|
|
* user context.
|
|
*/
|
|
if (user_address == 0 || in_atomic() || !mm)
|
|
goto no_context;
|
|
|
|
/*
|
|
* When we get here, the fault happened in the current
|
|
* task's user address space, so we can switch on the
|
|
* interrupts again and then search the VMAs
|
|
*/
|
|
local_irq_enable();
|
|
|
|
down_read(&mm->mmap_sem);
|
|
|
|
vma = find_vma(mm, address);
|
|
if (!vma)
|
|
goto bad_area;
|
|
|
|
#ifdef CONFIG_S390_EXEC_PROTECT
|
|
if (unlikely((user_address == 2) && !(vma->vm_flags & VM_EXEC)))
|
|
if (!signal_return(mm, regs, address, error_code))
|
|
/*
|
|
* signal_return() has done an up_read(&mm->mmap_sem)
|
|
* if it returns 0.
|
|
*/
|
|
return;
|
|
#endif
|
|
|
|
if (vma->vm_start <= address)
|
|
goto good_area;
|
|
if (!(vma->vm_flags & VM_GROWSDOWN))
|
|
goto bad_area;
|
|
if (expand_stack(vma, address))
|
|
goto bad_area;
|
|
/*
|
|
* Ok, we have a good vm_area for this memory access, so
|
|
* we can handle it..
|
|
*/
|
|
good_area:
|
|
si_code = SEGV_ACCERR;
|
|
if (!is_protection) {
|
|
/* page not present, check vm flags */
|
|
if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
|
|
goto bad_area;
|
|
} else {
|
|
if (!(vma->vm_flags & VM_WRITE))
|
|
goto bad_area;
|
|
}
|
|
|
|
survive:
|
|
/*
|
|
* If for any reason at all we couldn't handle the fault,
|
|
* make sure we exit gracefully rather than endlessly redo
|
|
* the fault.
|
|
*/
|
|
switch (handle_mm_fault(mm, vma, address, is_protection)) {
|
|
case VM_FAULT_MINOR:
|
|
tsk->min_flt++;
|
|
break;
|
|
case VM_FAULT_MAJOR:
|
|
tsk->maj_flt++;
|
|
break;
|
|
case VM_FAULT_SIGBUS:
|
|
goto do_sigbus;
|
|
case VM_FAULT_OOM:
|
|
goto out_of_memory;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
up_read(&mm->mmap_sem);
|
|
/*
|
|
* The instruction that caused the program check will
|
|
* be repeated. Don't signal single step via SIGTRAP.
|
|
*/
|
|
clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
|
|
return;
|
|
|
|
/*
|
|
* Something tried to access memory that isn't in our memory map..
|
|
* Fix it, but check if it's kernel or user first..
|
|
*/
|
|
bad_area:
|
|
up_read(&mm->mmap_sem);
|
|
|
|
/* User mode accesses just cause a SIGSEGV */
|
|
if (regs->psw.mask & PSW_MASK_PSTATE) {
|
|
tsk->thread.prot_addr = address;
|
|
tsk->thread.trap_no = error_code;
|
|
do_sigsegv(regs, error_code, si_code, address);
|
|
return;
|
|
}
|
|
|
|
no_context:
|
|
/* Are we prepared to handle this kernel fault? */
|
|
fixup = search_exception_tables(regs->psw.addr & __FIXUP_MASK);
|
|
if (fixup) {
|
|
regs->psw.addr = fixup->fixup | PSW_ADDR_AMODE;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Oops. The kernel tried to access some bad page. We'll have to
|
|
* terminate things with extreme prejudice.
|
|
*/
|
|
if (user_address == 0)
|
|
printk(KERN_ALERT "Unable to handle kernel pointer dereference"
|
|
" at virtual kernel address %p\n", (void *)address);
|
|
else
|
|
printk(KERN_ALERT "Unable to handle kernel paging request"
|
|
" at virtual user address %p\n", (void *)address);
|
|
|
|
die("Oops", regs, error_code);
|
|
do_exit(SIGKILL);
|
|
|
|
|
|
/*
|
|
* We ran out of memory, or some other thing happened to us that made
|
|
* us unable to handle the page fault gracefully.
|
|
*/
|
|
out_of_memory:
|
|
up_read(&mm->mmap_sem);
|
|
if (is_init(tsk)) {
|
|
yield();
|
|
down_read(&mm->mmap_sem);
|
|
goto survive;
|
|
}
|
|
printk("VM: killing process %s\n", tsk->comm);
|
|
if (regs->psw.mask & PSW_MASK_PSTATE)
|
|
do_exit(SIGKILL);
|
|
goto no_context;
|
|
|
|
do_sigbus:
|
|
up_read(&mm->mmap_sem);
|
|
|
|
/*
|
|
* Send a sigbus, regardless of whether we were in kernel
|
|
* or user mode.
|
|
*/
|
|
tsk->thread.prot_addr = address;
|
|
tsk->thread.trap_no = error_code;
|
|
force_sig(SIGBUS, tsk);
|
|
|
|
/* Kernel mode? Handle exceptions or die */
|
|
if (!(regs->psw.mask & PSW_MASK_PSTATE))
|
|
goto no_context;
|
|
}
|
|
|
|
void do_protection_exception(struct pt_regs *regs, unsigned long error_code)
|
|
{
|
|
regs->psw.addr -= (error_code >> 16);
|
|
do_exception(regs, 4, 1);
|
|
}
|
|
|
|
void do_dat_exception(struct pt_regs *regs, unsigned long error_code)
|
|
{
|
|
do_exception(regs, error_code & 0xff, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PFAULT
|
|
/*
|
|
* 'pfault' pseudo page faults routines.
|
|
*/
|
|
static ext_int_info_t ext_int_pfault;
|
|
static int pfault_disable = 0;
|
|
|
|
static int __init nopfault(char *str)
|
|
{
|
|
pfault_disable = 1;
|
|
return 1;
|
|
}
|
|
|
|
__setup("nopfault", nopfault);
|
|
|
|
typedef struct {
|
|
__u16 refdiagc;
|
|
__u16 reffcode;
|
|
__u16 refdwlen;
|
|
__u16 refversn;
|
|
__u64 refgaddr;
|
|
__u64 refselmk;
|
|
__u64 refcmpmk;
|
|
__u64 reserved;
|
|
} __attribute__ ((packed)) pfault_refbk_t;
|
|
|
|
int pfault_init(void)
|
|
{
|
|
pfault_refbk_t refbk =
|
|
{ 0x258, 0, 5, 2, __LC_CURRENT, 1ULL << 48, 1ULL << 48,
|
|
__PF_RES_FIELD };
|
|
int rc;
|
|
|
|
if (!MACHINE_IS_VM || pfault_disable)
|
|
return -1;
|
|
asm volatile(
|
|
" diag %1,%0,0x258\n"
|
|
"0: j 2f\n"
|
|
"1: la %0,8\n"
|
|
"2:\n"
|
|
EX_TABLE(0b,1b)
|
|
: "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc");
|
|
__ctl_set_bit(0, 9);
|
|
return rc;
|
|
}
|
|
|
|
void pfault_fini(void)
|
|
{
|
|
pfault_refbk_t refbk =
|
|
{ 0x258, 1, 5, 2, 0ULL, 0ULL, 0ULL, 0ULL };
|
|
|
|
if (!MACHINE_IS_VM || pfault_disable)
|
|
return;
|
|
__ctl_clear_bit(0,9);
|
|
asm volatile(
|
|
" diag %0,0,0x258\n"
|
|
"0:\n"
|
|
EX_TABLE(0b,0b)
|
|
: : "a" (&refbk), "m" (refbk) : "cc");
|
|
}
|
|
|
|
static void pfault_interrupt(__u16 error_code)
|
|
{
|
|
struct task_struct *tsk;
|
|
__u16 subcode;
|
|
|
|
/*
|
|
* Get the external interruption subcode & pfault
|
|
* initial/completion signal bit. VM stores this
|
|
* in the 'cpu address' field associated with the
|
|
* external interrupt.
|
|
*/
|
|
subcode = S390_lowcore.cpu_addr;
|
|
if ((subcode & 0xff00) != __SUBCODE_MASK)
|
|
return;
|
|
|
|
/*
|
|
* Get the token (= address of the task structure of the affected task).
|
|
*/
|
|
tsk = *(struct task_struct **) __LC_PFAULT_INTPARM;
|
|
|
|
if (subcode & 0x0080) {
|
|
/* signal bit is set -> a page has been swapped in by VM */
|
|
if (xchg(&tsk->thread.pfault_wait, -1) != 0) {
|
|
/* Initial interrupt was faster than the completion
|
|
* interrupt. pfault_wait is valid. Set pfault_wait
|
|
* back to zero and wake up the process. This can
|
|
* safely be done because the task is still sleeping
|
|
* and can't produce new pfaults. */
|
|
tsk->thread.pfault_wait = 0;
|
|
wake_up_process(tsk);
|
|
put_task_struct(tsk);
|
|
}
|
|
} else {
|
|
/* signal bit not set -> a real page is missing. */
|
|
get_task_struct(tsk);
|
|
set_task_state(tsk, TASK_UNINTERRUPTIBLE);
|
|
if (xchg(&tsk->thread.pfault_wait, 1) != 0) {
|
|
/* Completion interrupt was faster than the initial
|
|
* interrupt (swapped in a -1 for pfault_wait). Set
|
|
* pfault_wait back to zero and exit. This can be
|
|
* done safely because tsk is running in kernel
|
|
* mode and can't produce new pfaults. */
|
|
tsk->thread.pfault_wait = 0;
|
|
set_task_state(tsk, TASK_RUNNING);
|
|
put_task_struct(tsk);
|
|
} else
|
|
set_tsk_need_resched(tsk);
|
|
}
|
|
}
|
|
|
|
void __init pfault_irq_init(void)
|
|
{
|
|
if (!MACHINE_IS_VM)
|
|
return;
|
|
|
|
/*
|
|
* Try to get pfault pseudo page faults going.
|
|
*/
|
|
if (register_early_external_interrupt(0x2603, pfault_interrupt,
|
|
&ext_int_pfault) != 0)
|
|
panic("Couldn't request external interrupt 0x2603");
|
|
|
|
if (pfault_init() == 0)
|
|
return;
|
|
|
|
/* Tough luck, no pfault. */
|
|
pfault_disable = 1;
|
|
unregister_early_external_interrupt(0x2603, pfault_interrupt,
|
|
&ext_int_pfault);
|
|
}
|
|
#endif
|