cda13dd164
This patch converts the remaining 83xx boards to the dts-v1 format. This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx, mpc8349emitxgp and the mpc836x_mds. The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already dts-v1 and only undergo minor changes for the sake of formatting consistency across the whole group of boards; i.e. the idea being that you can do a "diff -u board_A.dts board_B.dts" and see something meaningful. The general rule I've applied is that entries for values normally parsed by humans are left in decimal (i.e. IRQ, cache size, clock rates, basic counts and indexes) and all other data (i.e. reg and ranges, IRQ flags etc.) remain in hex. I've used dtc to confirm that the output prior to this changeset matches the output after this changeset is applied for all boards. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
276 lines
6.1 KiB
Text
276 lines
6.1 KiB
Text
/*
|
|
* MPC8313E RDB Device Tree Source
|
|
*
|
|
* Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "MPC8313ERDB";
|
|
compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8313@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-line-size = <32>;
|
|
d-cache-size = <16384>;
|
|
i-cache-size = <16384>;
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x08000000>; // 128MB at 0
|
|
};
|
|
|
|
localbus@e0005000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus";
|
|
reg = <0xe0005000 0x1000>;
|
|
interrupts = <77 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
|
|
// CS0 and CS1 are swapped when
|
|
// booting from nand, but the
|
|
// addresses are the same.
|
|
ranges = <0x0 0x0 0xfe000000 0x00800000
|
|
0x1 0x0 0xe2800000 0x00008000
|
|
0x2 0x0 0xf0000000 0x00020000
|
|
0x3 0x0 0xfa000000 0x00008000>;
|
|
|
|
flash@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x800000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
};
|
|
|
|
nand@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8313-fcm-nand",
|
|
"fsl,elbc-fcm-nand";
|
|
reg = <0x1 0x0 0x2000>;
|
|
|
|
u-boot@0 {
|
|
reg = <0x0 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
kernel@100000 {
|
|
reg = <0x100000 0x300000>;
|
|
};
|
|
|
|
fs@400000 {
|
|
reg = <0x400000 0x1c00000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
soc8313@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "simple-bus";
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
|
reg = <0xe0000000 0x00000200>;
|
|
bus-frequency = <0>;
|
|
|
|
wdt@200 {
|
|
device_type = "watchdog";
|
|
compatible = "mpc83xx_wdt";
|
|
reg = <0x200 0x100>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <15 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
spi@7000 {
|
|
cell-index = <0>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x7000 0x1000>;
|
|
interrupts = <16 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
|
|
usb@23000 {
|
|
compatible = "fsl-usb2-dr";
|
|
reg = <0x23000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <38 0x8>;
|
|
phy_type = "utmi_wide";
|
|
};
|
|
|
|
mdio@24520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,gianfar-mdio";
|
|
reg = <0x24520 0x20>;
|
|
phy1: ethernet-phy@1 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <19 0x8>;
|
|
reg = <0x1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy4: ethernet-phy@4 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <20 0x8>;
|
|
reg = <0x4>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
enet0: ethernet@24000 {
|
|
cell-index = <0>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x24000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <37 0x8 36 0x8 35 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
phy-handle = < &phy1 >;
|
|
};
|
|
|
|
enet1: ethernet@25000 {
|
|
cell-index = <1>;
|
|
device_type = "network";
|
|
model = "eTSEC";
|
|
compatible = "gianfar";
|
|
reg = <0x25000 0x1000>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <34 0x8 33 0x8 32 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
phy-handle = < &phy4 >;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <0>;
|
|
interrupts = <10 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
crypto@30000 {
|
|
device_type = "crypto";
|
|
model = "SEC2";
|
|
compatible = "talitos";
|
|
reg = <0x30000 0x7000>;
|
|
interrupts = <11 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
/* Rev. 2.2 */
|
|
num-channels = <1>;
|
|
channel-fifo-len = <24>;
|
|
exec-units-mask = <0x0000004c>;
|
|
descriptor-types-mask = <0x0122003f>;
|
|
};
|
|
|
|
/* IPIC
|
|
* interrupts cell = <intr #, sense>
|
|
* sense values match linux IORESOURCE_IRQ_* defines:
|
|
* sense == 8: Level, low assertion
|
|
* sense == 2: Edge, high-to-low change
|
|
*/
|
|
ipic: pic@700 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x700 0x100>;
|
|
device_type = "ipic";
|
|
};
|
|
};
|
|
|
|
pci0: pci@e0008500 {
|
|
cell-index = <1>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x0E -mini PCI */
|
|
0x7000 0x0 0x0 0x1 &ipic 18 0x8
|
|
0x7000 0x0 0x0 0x2 &ipic 18 0x8
|
|
0x7000 0x0 0x0 0x3 &ipic 18 0x8
|
|
0x7000 0x0 0x0 0x4 &ipic 18 0x8
|
|
|
|
/* IDSEL 0x0F - PCI slot */
|
|
0x7800 0x0 0x0 0x1 &ipic 17 0x8
|
|
0x7800 0x0 0x0 0x2 &ipic 18 0x8
|
|
0x7800 0x0 0x0 0x3 &ipic 17 0x8
|
|
0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <66 0x8>;
|
|
bus-range = <0x0 0x0>;
|
|
ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
|
|
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
|
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
|
|
clock-frequency = <66666666>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe0008500 0x100>;
|
|
compatible = "fsl,mpc8349-pci";
|
|
device_type = "pci";
|
|
};
|
|
};
|