cdafc37a7b
This device is not a serial port, but a virtual CD-ROM device. For example with my Novatel MC950D: lsusb -v -d 1410:5010 | grep InterfaceClass bInterfaceClass 8 Mass Storage After some time (ca. 5min) or if virtual CD is ejected, device id changes to 1410:4400: % lsusb -v -d 1410:4400 | grep InterfaceClass bInterfaceClass 255 Vendor Specific Class bInterfaceClass 255 Vendor Specific Class Variable name says that 0x5010 is a Novatel U727, but searching in internet shows, that this device also provides virtual CD that should be ejected before use. Product id for serial port in this case is 0x4100. Signed-off-by: Eugeniy Meshcheryakov <eugen@debian.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
972 lines
31 KiB
C
972 lines
31 KiB
C
/*
|
|
USB Driver for GSM modems
|
|
|
|
Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
|
|
|
|
This driver is free software; you can redistribute it and/or modify
|
|
it under the terms of Version 2 of the GNU General Public License as
|
|
published by the Free Software Foundation.
|
|
|
|
Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
|
|
|
|
History: see the git log.
|
|
|
|
Work sponsored by: Sigos GmbH, Germany <info@sigos.de>
|
|
|
|
This driver exists because the "normal" serial driver doesn't work too well
|
|
with GSM modems. Issues:
|
|
- data loss -- one single Receive URB is not nearly enough
|
|
- nonstandard flow (Option devices) control
|
|
- controlling the baud rate doesn't make sense
|
|
|
|
This driver is named "option" because the most common device it's
|
|
used for is a PC-Card (with an internal OHCI-USB interface, behind
|
|
which the GSM interface sits), made by Option Inc.
|
|
|
|
Some of the "one port" devices actually exhibit multiple USB instances
|
|
on the USB bus. This is not a bug, these ports are used for different
|
|
device features.
|
|
*/
|
|
|
|
#define DRIVER_VERSION "v0.7.2"
|
|
#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
|
|
#define DRIVER_DESC "USB Driver for GSM modems"
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/module.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/serial.h>
|
|
|
|
/* Function prototypes */
|
|
static int option_open(struct usb_serial_port *port, struct file *filp);
|
|
static void option_close(struct usb_serial_port *port, struct file *filp);
|
|
static int option_startup(struct usb_serial *serial);
|
|
static void option_shutdown(struct usb_serial *serial);
|
|
static void option_rx_throttle(struct usb_serial_port *port);
|
|
static void option_rx_unthrottle(struct usb_serial_port *port);
|
|
static int option_write_room(struct usb_serial_port *port);
|
|
|
|
static void option_instat_callback(struct urb *urb);
|
|
|
|
static int option_write(struct usb_serial_port *port,
|
|
const unsigned char *buf, int count);
|
|
|
|
static int option_chars_in_buffer(struct usb_serial_port *port);
|
|
static int option_ioctl(struct usb_serial_port *port, struct file *file,
|
|
unsigned int cmd, unsigned long arg);
|
|
static void option_set_termios(struct usb_serial_port *port,
|
|
struct ktermios *old);
|
|
static void option_break_ctl(struct usb_serial_port *port, int break_state);
|
|
static int option_tiocmget(struct usb_serial_port *port, struct file *file);
|
|
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
|
|
unsigned int set, unsigned int clear);
|
|
static int option_send_setup(struct usb_serial_port *port);
|
|
|
|
/* Vendor and product IDs */
|
|
#define OPTION_VENDOR_ID 0x0AF0
|
|
#define OPTION_PRODUCT_COLT 0x5000
|
|
#define OPTION_PRODUCT_RICOLA 0x6000
|
|
#define OPTION_PRODUCT_RICOLA_LIGHT 0x6100
|
|
#define OPTION_PRODUCT_RICOLA_QUAD 0x6200
|
|
#define OPTION_PRODUCT_RICOLA_QUAD_LIGHT 0x6300
|
|
#define OPTION_PRODUCT_RICOLA_NDIS 0x6050
|
|
#define OPTION_PRODUCT_RICOLA_NDIS_LIGHT 0x6150
|
|
#define OPTION_PRODUCT_RICOLA_NDIS_QUAD 0x6250
|
|
#define OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT 0x6350
|
|
#define OPTION_PRODUCT_COBRA 0x6500
|
|
#define OPTION_PRODUCT_COBRA_BUS 0x6501
|
|
#define OPTION_PRODUCT_VIPER 0x6600
|
|
#define OPTION_PRODUCT_VIPER_BUS 0x6601
|
|
#define OPTION_PRODUCT_GT_MAX_READY 0x6701
|
|
#define OPTION_PRODUCT_GT_MAX 0x6711
|
|
#define OPTION_PRODUCT_FUJI_MODEM_LIGHT 0x6721
|
|
#define OPTION_PRODUCT_FUJI_MODEM_GT 0x6741
|
|
#define OPTION_PRODUCT_FUJI_MODEM_EX 0x6761
|
|
#define OPTION_PRODUCT_FUJI_NETWORK_LIGHT 0x6731
|
|
#define OPTION_PRODUCT_FUJI_NETWORK_GT 0x6751
|
|
#define OPTION_PRODUCT_FUJI_NETWORK_EX 0x6771
|
|
#define OPTION_PRODUCT_KOI_MODEM 0x6800
|
|
#define OPTION_PRODUCT_KOI_NETWORK 0x6811
|
|
#define OPTION_PRODUCT_SCORPION_MODEM 0x6901
|
|
#define OPTION_PRODUCT_SCORPION_NETWORK 0x6911
|
|
#define OPTION_PRODUCT_ETNA_MODEM 0x7001
|
|
#define OPTION_PRODUCT_ETNA_NETWORK 0x7011
|
|
#define OPTION_PRODUCT_ETNA_MODEM_LITE 0x7021
|
|
#define OPTION_PRODUCT_ETNA_MODEM_GT 0x7041
|
|
#define OPTION_PRODUCT_ETNA_MODEM_EX 0x7061
|
|
#define OPTION_PRODUCT_ETNA_NETWORK_LITE 0x7031
|
|
#define OPTION_PRODUCT_ETNA_NETWORK_GT 0x7051
|
|
#define OPTION_PRODUCT_ETNA_NETWORK_EX 0x7071
|
|
#define OPTION_PRODUCT_ETNA_KOI_MODEM 0x7100
|
|
#define OPTION_PRODUCT_ETNA_KOI_NETWORK 0x7111
|
|
|
|
#define HUAWEI_VENDOR_ID 0x12D1
|
|
#define HUAWEI_PRODUCT_E600 0x1001
|
|
#define HUAWEI_PRODUCT_E220 0x1003
|
|
#define HUAWEI_PRODUCT_E220BIS 0x1004
|
|
#define HUAWEI_PRODUCT_E1401 0x1401
|
|
#define HUAWEI_PRODUCT_E1403 0x1403
|
|
#define HUAWEI_PRODUCT_E1405 0x1405
|
|
#define HUAWEI_PRODUCT_E1406 0x1406
|
|
#define HUAWEI_PRODUCT_E1408 0x1408
|
|
#define HUAWEI_PRODUCT_E1409 0x1409
|
|
#define HUAWEI_PRODUCT_E1410 0x1410
|
|
#define HUAWEI_PRODUCT_E1411 0x1411
|
|
#define HUAWEI_PRODUCT_E1412 0x1412
|
|
#define HUAWEI_PRODUCT_E1413 0x1413
|
|
#define HUAWEI_PRODUCT_E1414 0x1414
|
|
#define HUAWEI_PRODUCT_E1415 0x1415
|
|
#define HUAWEI_PRODUCT_E1416 0x1416
|
|
#define HUAWEI_PRODUCT_E1417 0x1417
|
|
#define HUAWEI_PRODUCT_E1418 0x1418
|
|
#define HUAWEI_PRODUCT_E1419 0x1419
|
|
|
|
#define NOVATELWIRELESS_VENDOR_ID 0x1410
|
|
|
|
/* MERLIN EVDO PRODUCTS */
|
|
#define NOVATELWIRELESS_PRODUCT_V640 0x1100
|
|
#define NOVATELWIRELESS_PRODUCT_V620 0x1110
|
|
#define NOVATELWIRELESS_PRODUCT_V740 0x1120
|
|
#define NOVATELWIRELESS_PRODUCT_V720 0x1130
|
|
|
|
/* MERLIN HSDPA/HSPA PRODUCTS */
|
|
#define NOVATELWIRELESS_PRODUCT_U730 0x1400
|
|
#define NOVATELWIRELESS_PRODUCT_U740 0x1410
|
|
#define NOVATELWIRELESS_PRODUCT_U870 0x1420
|
|
#define NOVATELWIRELESS_PRODUCT_XU870 0x1430
|
|
#define NOVATELWIRELESS_PRODUCT_X950D 0x1450
|
|
|
|
/* EXPEDITE PRODUCTS */
|
|
#define NOVATELWIRELESS_PRODUCT_EV620 0x2100
|
|
#define NOVATELWIRELESS_PRODUCT_ES720 0x2110
|
|
#define NOVATELWIRELESS_PRODUCT_E725 0x2120
|
|
#define NOVATELWIRELESS_PRODUCT_ES620 0x2130
|
|
#define NOVATELWIRELESS_PRODUCT_EU730 0x2400
|
|
#define NOVATELWIRELESS_PRODUCT_EU740 0x2410
|
|
#define NOVATELWIRELESS_PRODUCT_EU870D 0x2420
|
|
|
|
/* OVATION PRODUCTS */
|
|
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
|
|
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
|
|
|
|
/* FUTURE NOVATEL PRODUCTS */
|
|
#define NOVATELWIRELESS_PRODUCT_EVDO_1 0x6000
|
|
#define NOVATELWIRELESS_PRODUCT_HSPA_1 0x7000
|
|
#define NOVATELWIRELESS_PRODUCT_EMBEDDED_1 0x8000
|
|
#define NOVATELWIRELESS_PRODUCT_GLOBAL_1 0x9000
|
|
#define NOVATELWIRELESS_PRODUCT_EVDO_2 0x6001
|
|
#define NOVATELWIRELESS_PRODUCT_HSPA_2 0x7001
|
|
#define NOVATELWIRELESS_PRODUCT_EMBEDDED_2 0x8001
|
|
#define NOVATELWIRELESS_PRODUCT_GLOBAL_2 0x9001
|
|
|
|
/* AMOI PRODUCTS */
|
|
#define AMOI_VENDOR_ID 0x1614
|
|
#define AMOI_PRODUCT_H01 0x0800
|
|
#define AMOI_PRODUCT_H01A 0x7002
|
|
#define AMOI_PRODUCT_H02 0x0802
|
|
|
|
#define DELL_VENDOR_ID 0x413C
|
|
|
|
#define KYOCERA_VENDOR_ID 0x0c88
|
|
#define KYOCERA_PRODUCT_KPC680 0x180a
|
|
|
|
#define ANYDATA_VENDOR_ID 0x16d5
|
|
#define ANYDATA_PRODUCT_ADU_E100A 0x6501
|
|
#define ANYDATA_PRODUCT_ADU_500A 0x6502
|
|
|
|
#define AXESSTEL_VENDOR_ID 0x1726
|
|
#define AXESSTEL_PRODUCT_MV110H 0x1000
|
|
|
|
#define ONDA_VENDOR_ID 0x19d2
|
|
#define ONDA_PRODUCT_ET502HS 0x0002
|
|
|
|
#define BANDRICH_VENDOR_ID 0x1A8D
|
|
#define BANDRICH_PRODUCT_C100_1 0x1002
|
|
#define BANDRICH_PRODUCT_C100_2 0x1003
|
|
|
|
#define AMOI_VENDOR_ID 0x1614
|
|
#define AMOI_PRODUCT_9508 0x0800
|
|
|
|
#define QUALCOMM_VENDOR_ID 0x05C6
|
|
|
|
#define MAXON_VENDOR_ID 0x16d8
|
|
|
|
static struct usb_device_id option_ids[] = {
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_QUAD_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA_NDIS_QUAD_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA_BUS) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER_BUS) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX_READY) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_GT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_EX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_LIGHT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_GT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_EX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_MODEM) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_NETWORK) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_MODEM) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_NETWORK) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_LITE) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_LITE) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_GT) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
|
|
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
|
|
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
|
|
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418) },
|
|
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419) },
|
|
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V720) }, /* Novatel Merlin V720/S720/PC720 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U730) }, /* Novatel U730/U740 (VF version) */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U740) }, /* Novatel U740 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U870) }, /* Novatel U870 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_XU870) }, /* Novatel Merlin XU870 HSDPA/3G */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_X950D) }, /* Novatel X950D */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) }, /* Novatel EV620/ES620 CDMA/EV-DO */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) }, /* Novatel ES620/ES720/U720/USB720 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) }, /* Novatel E725/E726 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES620) }, /* Novatel Merlin ES620 SM Bus */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) }, /* Novatel EU730 and Vodafone EU740 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) }, /* Novatel non-Vodafone EU740 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_1) }, /* Novatel Global product */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_2) }, /* Novatel EVDO product */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_2) }, /* Novatel HSPA product */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */
|
|
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */
|
|
|
|
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
|
|
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
|
|
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) },
|
|
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8129) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8133) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8136) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
|
|
{ USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */
|
|
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
|
|
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
|
|
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
|
|
{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
|
|
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
|
|
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
|
|
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
|
|
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
|
|
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
|
|
{ USB_DEVICE(0x19d2, 0x0001) }, /* Telstra NextG CDMA */
|
|
{ } /* Terminating entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, option_ids);
|
|
|
|
static struct usb_driver option_driver = {
|
|
.name = "option",
|
|
.probe = usb_serial_probe,
|
|
.disconnect = usb_serial_disconnect,
|
|
.id_table = option_ids,
|
|
.no_dynamic_id = 1,
|
|
};
|
|
|
|
/* The card has three separate interfaces, which the serial driver
|
|
* recognizes separately, thus num_port=1.
|
|
*/
|
|
|
|
static struct usb_serial_driver option_1port_device = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "option1",
|
|
},
|
|
.description = "GSM modem (1-port)",
|
|
.usb_driver = &option_driver,
|
|
.id_table = option_ids,
|
|
.num_ports = 1,
|
|
.open = option_open,
|
|
.close = option_close,
|
|
.write = option_write,
|
|
.write_room = option_write_room,
|
|
.chars_in_buffer = option_chars_in_buffer,
|
|
.throttle = option_rx_throttle,
|
|
.unthrottle = option_rx_unthrottle,
|
|
.ioctl = option_ioctl,
|
|
.set_termios = option_set_termios,
|
|
.break_ctl = option_break_ctl,
|
|
.tiocmget = option_tiocmget,
|
|
.tiocmset = option_tiocmset,
|
|
.attach = option_startup,
|
|
.shutdown = option_shutdown,
|
|
.read_int_callback = option_instat_callback,
|
|
};
|
|
|
|
#ifdef CONFIG_USB_DEBUG
|
|
static int debug;
|
|
#else
|
|
#define debug 0
|
|
#endif
|
|
|
|
/* per port private data */
|
|
|
|
#define N_IN_URB 4
|
|
#define N_OUT_URB 1
|
|
#define IN_BUFLEN 4096
|
|
#define OUT_BUFLEN 128
|
|
|
|
struct option_port_private {
|
|
/* Input endpoints and buffer for this port */
|
|
struct urb *in_urbs[N_IN_URB];
|
|
u8 *in_buffer[N_IN_URB];
|
|
/* Output endpoints and buffer for this port */
|
|
struct urb *out_urbs[N_OUT_URB];
|
|
u8 *out_buffer[N_OUT_URB];
|
|
unsigned long out_busy; /* Bit vector of URBs in use */
|
|
|
|
/* Settings for the port */
|
|
int rts_state; /* Handshaking pins (outputs) */
|
|
int dtr_state;
|
|
int cts_state; /* Handshaking pins (inputs) */
|
|
int dsr_state;
|
|
int dcd_state;
|
|
int ri_state;
|
|
|
|
unsigned long tx_start_time[N_OUT_URB];
|
|
};
|
|
|
|
/* Functions used by new usb-serial code. */
|
|
static int __init option_init(void)
|
|
{
|
|
int retval;
|
|
retval = usb_serial_register(&option_1port_device);
|
|
if (retval)
|
|
goto failed_1port_device_register;
|
|
retval = usb_register(&option_driver);
|
|
if (retval)
|
|
goto failed_driver_register;
|
|
|
|
info(DRIVER_DESC ": " DRIVER_VERSION);
|
|
|
|
return 0;
|
|
|
|
failed_driver_register:
|
|
usb_serial_deregister (&option_1port_device);
|
|
failed_1port_device_register:
|
|
return retval;
|
|
}
|
|
|
|
static void __exit option_exit(void)
|
|
{
|
|
usb_deregister (&option_driver);
|
|
usb_serial_deregister (&option_1port_device);
|
|
}
|
|
|
|
module_init(option_init);
|
|
module_exit(option_exit);
|
|
|
|
static void option_rx_throttle(struct usb_serial_port *port)
|
|
{
|
|
dbg("%s", __func__);
|
|
}
|
|
|
|
static void option_rx_unthrottle(struct usb_serial_port *port)
|
|
{
|
|
dbg("%s", __func__);
|
|
}
|
|
|
|
static void option_break_ctl(struct usb_serial_port *port, int break_state)
|
|
{
|
|
/* Unfortunately, I don't know how to send a break */
|
|
dbg("%s", __func__);
|
|
}
|
|
|
|
static void option_set_termios(struct usb_serial_port *port,
|
|
struct ktermios *old_termios)
|
|
{
|
|
dbg("%s", __func__);
|
|
/* Doesn't support option setting */
|
|
tty_termios_copy_hw(port->tty->termios, old_termios);
|
|
option_send_setup(port);
|
|
}
|
|
|
|
static int option_tiocmget(struct usb_serial_port *port, struct file *file)
|
|
{
|
|
unsigned int value;
|
|
struct option_port_private *portdata;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
|
|
((portdata->dtr_state) ? TIOCM_DTR : 0) |
|
|
((portdata->cts_state) ? TIOCM_CTS : 0) |
|
|
((portdata->dsr_state) ? TIOCM_DSR : 0) |
|
|
((portdata->dcd_state) ? TIOCM_CAR : 0) |
|
|
((portdata->ri_state) ? TIOCM_RNG : 0);
|
|
|
|
return value;
|
|
}
|
|
|
|
static int option_tiocmset(struct usb_serial_port *port, struct file *file,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
struct option_port_private *portdata;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
/* FIXME: what locks portdata fields ? */
|
|
if (set & TIOCM_RTS)
|
|
portdata->rts_state = 1;
|
|
if (set & TIOCM_DTR)
|
|
portdata->dtr_state = 1;
|
|
|
|
if (clear & TIOCM_RTS)
|
|
portdata->rts_state = 0;
|
|
if (clear & TIOCM_DTR)
|
|
portdata->dtr_state = 0;
|
|
return option_send_setup(port);
|
|
}
|
|
|
|
static int option_ioctl(struct usb_serial_port *port, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
|
|
/* Write */
|
|
static int option_write(struct usb_serial_port *port,
|
|
const unsigned char *buf, int count)
|
|
{
|
|
struct option_port_private *portdata;
|
|
int i;
|
|
int left, todo;
|
|
struct urb *this_urb = NULL; /* spurious */
|
|
int err;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
dbg("%s: write (%d chars)", __func__, count);
|
|
|
|
i = 0;
|
|
left = count;
|
|
for (i=0; left > 0 && i < N_OUT_URB; i++) {
|
|
todo = left;
|
|
if (todo > OUT_BUFLEN)
|
|
todo = OUT_BUFLEN;
|
|
|
|
this_urb = portdata->out_urbs[i];
|
|
if (test_and_set_bit(i, &portdata->out_busy)) {
|
|
if (time_before(jiffies,
|
|
portdata->tx_start_time[i] + 10 * HZ))
|
|
continue;
|
|
usb_unlink_urb(this_urb);
|
|
continue;
|
|
}
|
|
if (this_urb->status != 0)
|
|
dbg("usb_write %p failed (err=%d)",
|
|
this_urb, this_urb->status);
|
|
|
|
dbg("%s: endpoint %d buf %d", __func__,
|
|
usb_pipeendpoint(this_urb->pipe), i);
|
|
|
|
/* send the data */
|
|
memcpy (this_urb->transfer_buffer, buf, todo);
|
|
this_urb->transfer_buffer_length = todo;
|
|
|
|
this_urb->dev = port->serial->dev;
|
|
err = usb_submit_urb(this_urb, GFP_ATOMIC);
|
|
if (err) {
|
|
dbg("usb_submit_urb %p (write bulk) failed "
|
|
"(%d, has %d)", this_urb,
|
|
err, this_urb->status);
|
|
clear_bit(i, &portdata->out_busy);
|
|
continue;
|
|
}
|
|
portdata->tx_start_time[i] = jiffies;
|
|
buf += todo;
|
|
left -= todo;
|
|
}
|
|
|
|
count -= left;
|
|
dbg("%s: wrote (did %d)", __func__, count);
|
|
return count;
|
|
}
|
|
|
|
static void option_indat_callback(struct urb *urb)
|
|
{
|
|
int err;
|
|
int endpoint;
|
|
struct usb_serial_port *port;
|
|
struct tty_struct *tty;
|
|
unsigned char *data = urb->transfer_buffer;
|
|
int status = urb->status;
|
|
|
|
dbg("%s: %p", __func__, urb);
|
|
|
|
endpoint = usb_pipeendpoint(urb->pipe);
|
|
port = urb->context;
|
|
|
|
if (status) {
|
|
dbg("%s: nonzero status: %d on endpoint %02x.",
|
|
__func__, status, endpoint);
|
|
} else {
|
|
tty = port->tty;
|
|
if (urb->actual_length) {
|
|
tty_buffer_request_room(tty, urb->actual_length);
|
|
tty_insert_flip_string(tty, data, urb->actual_length);
|
|
tty_flip_buffer_push(tty);
|
|
} else {
|
|
dbg("%s: empty read urb received", __func__);
|
|
}
|
|
|
|
/* Resubmit urb so we continue receiving */
|
|
if (port->open_count && status != -ESHUTDOWN) {
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err)
|
|
printk(KERN_ERR "%s: resubmit read urb failed. "
|
|
"(%d)", __func__, err);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void option_outdat_callback(struct urb *urb)
|
|
{
|
|
struct usb_serial_port *port;
|
|
struct option_port_private *portdata;
|
|
int i;
|
|
|
|
dbg("%s", __func__);
|
|
|
|
port = urb->context;
|
|
|
|
usb_serial_port_softint(port);
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
for (i = 0; i < N_OUT_URB; ++i) {
|
|
if (portdata->out_urbs[i] == urb) {
|
|
smp_mb__before_clear_bit();
|
|
clear_bit(i, &portdata->out_busy);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void option_instat_callback(struct urb *urb)
|
|
{
|
|
int err;
|
|
int status = urb->status;
|
|
struct usb_serial_port *port = urb->context;
|
|
struct option_port_private *portdata = usb_get_serial_port_data(port);
|
|
struct usb_serial *serial = port->serial;
|
|
|
|
dbg("%s", __func__);
|
|
dbg("%s: urb %p port %p has data %p", __func__,urb,port,portdata);
|
|
|
|
if (status == 0) {
|
|
struct usb_ctrlrequest *req_pkt =
|
|
(struct usb_ctrlrequest *)urb->transfer_buffer;
|
|
|
|
if (!req_pkt) {
|
|
dbg("%s: NULL req_pkt\n", __func__);
|
|
return;
|
|
}
|
|
if ((req_pkt->bRequestType == 0xA1) &&
|
|
(req_pkt->bRequest == 0x20)) {
|
|
int old_dcd_state;
|
|
unsigned char signals = *((unsigned char *)
|
|
urb->transfer_buffer +
|
|
sizeof(struct usb_ctrlrequest));
|
|
|
|
dbg("%s: signal x%x", __func__, signals);
|
|
|
|
old_dcd_state = portdata->dcd_state;
|
|
portdata->cts_state = 1;
|
|
portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
|
|
portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
|
|
portdata->ri_state = ((signals & 0x08) ? 1 : 0);
|
|
|
|
if (port->tty && !C_CLOCAL(port->tty) &&
|
|
old_dcd_state && !portdata->dcd_state)
|
|
tty_hangup(port->tty);
|
|
} else {
|
|
dbg("%s: type %x req %x", __func__,
|
|
req_pkt->bRequestType,req_pkt->bRequest);
|
|
}
|
|
} else
|
|
dbg("%s: error %d", __func__, status);
|
|
|
|
/* Resubmit urb so we continue receiving IRQ data */
|
|
if (status != -ESHUTDOWN) {
|
|
urb->dev = serial->dev;
|
|
err = usb_submit_urb(urb, GFP_ATOMIC);
|
|
if (err)
|
|
dbg("%s: resubmit intr urb failed. (%d)",
|
|
__func__, err);
|
|
}
|
|
}
|
|
|
|
static int option_write_room(struct usb_serial_port *port)
|
|
{
|
|
struct option_port_private *portdata;
|
|
int i;
|
|
int data_len = 0;
|
|
struct urb *this_urb;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
|
|
for (i=0; i < N_OUT_URB; i++) {
|
|
this_urb = portdata->out_urbs[i];
|
|
if (this_urb && !test_bit(i, &portdata->out_busy))
|
|
data_len += OUT_BUFLEN;
|
|
}
|
|
|
|
dbg("%s: %d", __func__, data_len);
|
|
return data_len;
|
|
}
|
|
|
|
static int option_chars_in_buffer(struct usb_serial_port *port)
|
|
{
|
|
struct option_port_private *portdata;
|
|
int i;
|
|
int data_len = 0;
|
|
struct urb *this_urb;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
for (i=0; i < N_OUT_URB; i++) {
|
|
this_urb = portdata->out_urbs[i];
|
|
/* FIXME: This locking is insufficient as this_urb may
|
|
go unused during the test */
|
|
if (this_urb && test_bit(i, &portdata->out_busy))
|
|
data_len += this_urb->transfer_buffer_length;
|
|
}
|
|
dbg("%s: %d", __func__, data_len);
|
|
return data_len;
|
|
}
|
|
|
|
static int option_open(struct usb_serial_port *port, struct file *filp)
|
|
{
|
|
struct option_port_private *portdata;
|
|
struct usb_serial *serial = port->serial;
|
|
int i, err;
|
|
struct urb *urb;
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
dbg("%s", __func__);
|
|
|
|
/* Set some sane defaults */
|
|
portdata->rts_state = 1;
|
|
portdata->dtr_state = 1;
|
|
|
|
/* Reset low level data toggle and start reading from endpoints */
|
|
for (i = 0; i < N_IN_URB; i++) {
|
|
urb = portdata->in_urbs[i];
|
|
if (! urb)
|
|
continue;
|
|
if (urb->dev != serial->dev) {
|
|
dbg("%s: dev %p != %p", __func__,
|
|
urb->dev, serial->dev);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* make sure endpoint data toggle is synchronized with the
|
|
* device
|
|
*/
|
|
usb_clear_halt(urb->dev, urb->pipe);
|
|
|
|
err = usb_submit_urb(urb, GFP_KERNEL);
|
|
if (err) {
|
|
dbg("%s: submit urb %d failed (%d) %d",
|
|
__func__, i, err,
|
|
urb->transfer_buffer_length);
|
|
}
|
|
}
|
|
|
|
/* Reset low level data toggle on out endpoints */
|
|
for (i = 0; i < N_OUT_URB; i++) {
|
|
urb = portdata->out_urbs[i];
|
|
if (! urb)
|
|
continue;
|
|
urb->dev = serial->dev;
|
|
/* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
|
|
usb_pipeout(urb->pipe), 0); */
|
|
}
|
|
|
|
port->tty->low_latency = 1;
|
|
|
|
option_send_setup(port);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void option_close(struct usb_serial_port *port, struct file *filp)
|
|
{
|
|
int i;
|
|
struct usb_serial *serial = port->serial;
|
|
struct option_port_private *portdata;
|
|
|
|
dbg("%s", __func__);
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
portdata->rts_state = 0;
|
|
portdata->dtr_state = 0;
|
|
|
|
if (serial->dev) {
|
|
mutex_lock(&serial->disc_mutex);
|
|
if (!serial->disconnected)
|
|
option_send_setup(port);
|
|
mutex_unlock(&serial->disc_mutex);
|
|
|
|
/* Stop reading/writing urbs */
|
|
for (i = 0; i < N_IN_URB; i++)
|
|
usb_kill_urb(portdata->in_urbs[i]);
|
|
for (i = 0; i < N_OUT_URB; i++)
|
|
usb_kill_urb(portdata->out_urbs[i]);
|
|
}
|
|
port->tty = NULL;
|
|
}
|
|
|
|
/* Helper functions used by option_setup_urbs */
|
|
static struct urb *option_setup_urb(struct usb_serial *serial, int endpoint,
|
|
int dir, void *ctx, char *buf, int len,
|
|
void (*callback)(struct urb *))
|
|
{
|
|
struct urb *urb;
|
|
|
|
if (endpoint == -1)
|
|
return NULL; /* endpoint not needed */
|
|
|
|
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
|
|
if (urb == NULL) {
|
|
dbg("%s: alloc for endpoint %d failed.", __func__, endpoint);
|
|
return NULL;
|
|
}
|
|
|
|
/* Fill URB using supplied data. */
|
|
usb_fill_bulk_urb(urb, serial->dev,
|
|
usb_sndbulkpipe(serial->dev, endpoint) | dir,
|
|
buf, len, callback, ctx);
|
|
|
|
return urb;
|
|
}
|
|
|
|
/* Setup urbs */
|
|
static void option_setup_urbs(struct usb_serial *serial)
|
|
{
|
|
int i,j;
|
|
struct usb_serial_port *port;
|
|
struct option_port_private *portdata;
|
|
|
|
dbg("%s", __func__);
|
|
|
|
for (i = 0; i < serial->num_ports; i++) {
|
|
port = serial->port[i];
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
/* Do indat endpoints first */
|
|
for (j = 0; j < N_IN_URB; ++j) {
|
|
portdata->in_urbs[j] = option_setup_urb (serial,
|
|
port->bulk_in_endpointAddress, USB_DIR_IN, port,
|
|
portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
|
|
}
|
|
|
|
/* outdat endpoints */
|
|
for (j = 0; j < N_OUT_URB; ++j) {
|
|
portdata->out_urbs[j] = option_setup_urb (serial,
|
|
port->bulk_out_endpointAddress, USB_DIR_OUT, port,
|
|
portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/** send RTS/DTR state to the port.
|
|
*
|
|
* This is exactly the same as SET_CONTROL_LINE_STATE from the PSTN
|
|
* CDC.
|
|
*/
|
|
static int option_send_setup(struct usb_serial_port *port)
|
|
{
|
|
struct usb_serial *serial = port->serial;
|
|
struct option_port_private *portdata;
|
|
int ifNum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
|
|
dbg("%s", __func__);
|
|
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
if (port->tty) {
|
|
int val = 0;
|
|
if (portdata->dtr_state)
|
|
val |= 0x01;
|
|
if (portdata->rts_state)
|
|
val |= 0x02;
|
|
|
|
return usb_control_msg(serial->dev,
|
|
usb_rcvctrlpipe(serial->dev, 0),
|
|
0x22,0x21,val,ifNum,NULL,0,USB_CTRL_SET_TIMEOUT);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int option_startup(struct usb_serial *serial)
|
|
{
|
|
int i, j, err;
|
|
struct usb_serial_port *port;
|
|
struct option_port_private *portdata;
|
|
u8 *buffer;
|
|
|
|
dbg("%s", __func__);
|
|
|
|
/* Now setup per port private data */
|
|
for (i = 0; i < serial->num_ports; i++) {
|
|
port = serial->port[i];
|
|
portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
|
|
if (!portdata) {
|
|
dbg("%s: kmalloc for option_port_private (%d) failed!.",
|
|
__func__, i);
|
|
return (1);
|
|
}
|
|
|
|
for (j = 0; j < N_IN_URB; j++) {
|
|
buffer = (u8 *)__get_free_page(GFP_KERNEL);
|
|
if (!buffer)
|
|
goto bail_out_error;
|
|
portdata->in_buffer[j] = buffer;
|
|
}
|
|
|
|
for (j = 0; j < N_OUT_URB; j++) {
|
|
buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
|
|
if (!buffer)
|
|
goto bail_out_error2;
|
|
portdata->out_buffer[j] = buffer;
|
|
}
|
|
|
|
usb_set_serial_port_data(port, portdata);
|
|
|
|
if (! port->interrupt_in_urb)
|
|
continue;
|
|
err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
|
|
if (err)
|
|
dbg("%s: submit irq_in urb failed %d",
|
|
__func__, err);
|
|
}
|
|
|
|
option_setup_urbs(serial);
|
|
|
|
return (0);
|
|
|
|
bail_out_error2:
|
|
for (j = 0; j < N_OUT_URB; j++)
|
|
kfree(portdata->out_buffer[j]);
|
|
bail_out_error:
|
|
for (j = 0; j < N_IN_URB; j++)
|
|
if (portdata->in_buffer[j])
|
|
free_page((unsigned long)portdata->in_buffer[j]);
|
|
kfree(portdata);
|
|
return 1;
|
|
}
|
|
|
|
static void option_shutdown(struct usb_serial *serial)
|
|
{
|
|
int i, j;
|
|
struct usb_serial_port *port;
|
|
struct option_port_private *portdata;
|
|
|
|
dbg("%s", __func__);
|
|
|
|
/* Stop reading/writing urbs */
|
|
for (i = 0; i < serial->num_ports; ++i) {
|
|
port = serial->port[i];
|
|
portdata = usb_get_serial_port_data(port);
|
|
for (j = 0; j < N_IN_URB; j++)
|
|
usb_kill_urb(portdata->in_urbs[j]);
|
|
for (j = 0; j < N_OUT_URB; j++)
|
|
usb_kill_urb(portdata->out_urbs[j]);
|
|
}
|
|
|
|
/* Now free them */
|
|
for (i = 0; i < serial->num_ports; ++i) {
|
|
port = serial->port[i];
|
|
portdata = usb_get_serial_port_data(port);
|
|
|
|
for (j = 0; j < N_IN_URB; j++) {
|
|
if (portdata->in_urbs[j]) {
|
|
usb_free_urb(portdata->in_urbs[j]);
|
|
free_page((unsigned long)portdata->in_buffer[j]);
|
|
portdata->in_urbs[j] = NULL;
|
|
}
|
|
}
|
|
for (j = 0; j < N_OUT_URB; j++) {
|
|
if (portdata->out_urbs[j]) {
|
|
usb_free_urb(portdata->out_urbs[j]);
|
|
kfree(portdata->out_buffer[j]);
|
|
portdata->out_urbs[j] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Now free per port private data */
|
|
for (i = 0; i < serial->num_ports; i++) {
|
|
port = serial->port[i];
|
|
kfree(usb_get_serial_port_data(port));
|
|
}
|
|
}
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_VERSION(DRIVER_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#ifdef CONFIG_USB_DEBUG
|
|
module_param(debug, bool, S_IRUGO | S_IWUSR);
|
|
MODULE_PARM_DESC(debug, "Debug messages");
|
|
#endif
|
|
|