android_kernel_motorola_sm6225/drivers/usb/serial/belkin_sa.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

123 lines
5 KiB
C

/*
* Definitions for Belkin USB Serial Adapter Driver
*
* Copyright (C) 2000
* William Greathouse (wgreathouse@smva.com)
*
* This program is largely derived from work by the linux-usb group
* and associated source files. Please see the usb/serial files for
* individual credits and copyrights.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* See Documentation/usb/usb-serial.txt for more information on using this driver
*
* 12-Mar-2001 gkh
* Added GoHubs GO-COM232 device id.
*
* 06-Nov-2000 gkh
* Added old Belkin and Peracom device ids, which this driver supports
*
* 12-Oct-2000 William Greathouse
* First cut at supporting Belkin USB Serial Adapter F5U103
* I did not have a copy of the original work to support this
* adapter, so pardon any stupid mistakes. All of the information
* I am using to write this driver was acquired by using a modified
* UsbSnoop on Windows2000.
*
*/
#ifndef __LINUX_USB_SERIAL_BSA_H
#define __LINUX_USB_SERIAL_BSA_H
#define BELKIN_DOCKSTATION_VID 0x050d /* Vendor Id */
#define BELKIN_DOCKSTATION_PID 0x1203 /* Product Id */
#define BELKIN_SA_VID 0x050d /* Vendor Id */
#define BELKIN_SA_PID 0x0103 /* Product Id */
#define BELKIN_OLD_VID 0x056c /* Belkin's "old" vendor id */
#define BELKIN_OLD_PID 0x8007 /* Belkin's "old" single port serial converter's id */
#define PERACOM_VID 0x0565 /* Peracom's vendor id */
#define PERACOM_PID 0x0001 /* Peracom's single port serial converter's id */
#define GOHUBS_VID 0x0921 /* GoHubs vendor id */
#define GOHUBS_PID 0x1000 /* GoHubs single port serial converter's id (identical to the Peracom device) */
#define HANDYLINK_PID 0x1200 /* HandyLink USB's id (identical to the Peracom device) */
/* Vendor Request Interface */
#define BELKIN_SA_SET_BAUDRATE_REQUEST 0 /* Set baud rate */
#define BELKIN_SA_SET_STOP_BITS_REQUEST 1 /* Set stop bits (1,2) */
#define BELKIN_SA_SET_DATA_BITS_REQUEST 2 /* Set data bits (5,6,7,8) */
#define BELKIN_SA_SET_PARITY_REQUEST 3 /* Set parity (None, Even, Odd) */
#define BELKIN_SA_SET_DTR_REQUEST 10 /* Set DTR state */
#define BELKIN_SA_SET_RTS_REQUEST 11 /* Set RTS state */
#define BELKIN_SA_SET_BREAK_REQUEST 12 /* Set BREAK state */
#define BELKIN_SA_SET_FLOW_CTRL_REQUEST 16 /* Set flow control mode */
#ifdef WHEN_I_LEARN_THIS
#define BELKIN_SA_SET_MAGIC_REQUEST 17 /* I don't know, possibly flush */
/* (always in Wininit sequence before flow control) */
#define BELKIN_SA_RESET xx /* Reset the port */
#define BELKIN_SA_GET_MODEM_STATUS xx /* Force return of modem status register */
#endif
#define BELKIN_SA_SET_REQUEST_TYPE 0x40
#define BELKIN_SA_BAUD(b) (230400/b)
#define BELKIN_SA_STOP_BITS(b) (b-1)
#define BELKIN_SA_DATA_BITS(b) (b-5)
#define BELKIN_SA_PARITY_NONE 0
#define BELKIN_SA_PARITY_EVEN 1
#define BELKIN_SA_PARITY_ODD 2
#define BELKIN_SA_PARITY_MARK 3
#define BELKIN_SA_PARITY_SPACE 4
#define BELKIN_SA_FLOW_NONE 0x0000 /* No flow control */
#define BELKIN_SA_FLOW_OCTS 0x0001 /* use CTS input to throttle output */
#define BELKIN_SA_FLOW_ODSR 0x0002 /* use DSR input to throttle output */
#define BELKIN_SA_FLOW_IDSR 0x0004 /* use DSR input to enable receive */
#define BELKIN_SA_FLOW_IDTR 0x0008 /* use DTR output for input flow control */
#define BELKIN_SA_FLOW_IRTS 0x0010 /* use RTS output for input flow control */
#define BELKIN_SA_FLOW_ORTS 0x0020 /* use RTS to indicate data available to send */
#define BELKIN_SA_FLOW_ERRSUB 0x0040 /* ???? guess ???? substitute inline errors */
#define BELKIN_SA_FLOW_OXON 0x0080 /* use XON/XOFF for output flow control */
#define BELKIN_SA_FLOW_IXON 0x0100 /* use XON/XOFF for input flow control */
/*
* It seems that the interrupt pipe is closely modelled after the
* 16550 register layout. This is probably because the adapter can
* be used in a "DOS" environment to simulate a standard hardware port.
*/
#define BELKIN_SA_LSR_INDEX 2 /* Line Status Register */
#define BELKIN_SA_LSR_RDR 0x01 /* receive data ready */
#define BELKIN_SA_LSR_OE 0x02 /* overrun error */
#define BELKIN_SA_LSR_PE 0x04 /* parity error */
#define BELKIN_SA_LSR_FE 0x08 /* framing error */
#define BELKIN_SA_LSR_BI 0x10 /* break indicator */
#define BELKIN_SA_LSR_THE 0x20 /* transmit holding register empty */
#define BELKIN_SA_LSR_TE 0x40 /* transmit register empty */
#define BELKIN_SA_LSR_ERR 0x80 /* OE | PE | FE | BI */
#define BELKIN_SA_MSR_INDEX 3 /* Modem Status Register */
#define BELKIN_SA_MSR_DCTS 0x01 /* Delta CTS */
#define BELKIN_SA_MSR_DDSR 0x02 /* Delta DSR */
#define BELKIN_SA_MSR_DRI 0x04 /* Delta RI */
#define BELKIN_SA_MSR_DCD 0x08 /* Delta CD */
#define BELKIN_SA_MSR_CTS 0x10 /* Current CTS */
#define BELKIN_SA_MSR_DSR 0x20 /* Current DSR */
#define BELKIN_SA_MSR_RI 0x40 /* Current RI */
#define BELKIN_SA_MSR_CD 0x80 /* Current CD */
#endif /* __LINUX_USB_SERIAL_BSA_H */