1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
649 lines
16 KiB
ArmAsm
649 lines
16 KiB
ArmAsm
|
|
|
| round.sa 3.4 7/29/91
|
|
|
|
|
| handle rounding and normalization tasks
|
|
|
|
|
|
|
|
|
|
|
| Copyright (C) Motorola, Inc. 1990
|
|
| All Rights Reserved
|
|
|
|
|
| THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA
|
|
| The copyright notice above does not evidence any
|
|
| actual or intended publication of such source code.
|
|
|
|
|ROUND idnt 2,1 | Motorola 040 Floating Point Software Package
|
|
|
|
|section 8
|
|
|
|
#include "fpsp.h"
|
|
|
|
|
|
|
| round --- round result according to precision/mode
|
|
|
|
|
| a0 points to the input operand in the internal extended format
|
|
| d1(high word) contains rounding precision:
|
|
| ext = $0000xxxx
|
|
| sgl = $0001xxxx
|
|
| dbl = $0002xxxx
|
|
| d1(low word) contains rounding mode:
|
|
| RN = $xxxx0000
|
|
| RZ = $xxxx0001
|
|
| RM = $xxxx0010
|
|
| RP = $xxxx0011
|
|
| d0{31:29} contains the g,r,s bits (extended)
|
|
|
|
|
| On return the value pointed to by a0 is correctly rounded,
|
|
| a0 is preserved and the g-r-s bits in d0 are cleared.
|
|
| The result is not typed - the tag field is invalid. The
|
|
| result is still in the internal extended format.
|
|
|
|
|
| The INEX bit of USER_FPSR will be set if the rounded result was
|
|
| inexact (i.e. if any of the g-r-s bits were set).
|
|
|
|
|
|
|
.global round
|
|
round:
|
|
| If g=r=s=0 then result is exact and round is done, else set
|
|
| the inex flag in status reg and continue.
|
|
|
|
|
bsrs ext_grs |this subroutine looks at the
|
|
| :rounding precision and sets
|
|
| ;the appropriate g-r-s bits.
|
|
tstl %d0 |if grs are zero, go force
|
|
bne rnd_cont |lower bits to zero for size
|
|
|
|
swap %d1 |set up d1.w for round prec.
|
|
bra truncate
|
|
|
|
rnd_cont:
|
|
|
|
|
| Use rounding mode as an index into a jump table for these modes.
|
|
|
|
|
orl #inx2a_mask,USER_FPSR(%a6) |set inex2/ainex
|
|
lea mode_tab,%a1
|
|
movel (%a1,%d1.w*4),%a1
|
|
jmp (%a1)
|
|
|
|
|
| Jump table indexed by rounding mode in d1.w. All following assumes
|
|
| grs != 0.
|
|
|
|
|
mode_tab:
|
|
.long rnd_near
|
|
.long rnd_zero
|
|
.long rnd_mnus
|
|
.long rnd_plus
|
|
|
|
|
| ROUND PLUS INFINITY
|
|
|
|
|
| If sign of fp number = 0 (positive), then add 1 to l.
|
|
|
|
|
rnd_plus:
|
|
swap %d1 |set up d1 for round prec.
|
|
tstb LOCAL_SGN(%a0) |check for sign
|
|
bmi truncate |if positive then truncate
|
|
movel #0xffffffff,%d0 |force g,r,s to be all f's
|
|
lea add_to_l,%a1
|
|
movel (%a1,%d1.w*4),%a1
|
|
jmp (%a1)
|
|
|
|
|
| ROUND MINUS INFINITY
|
|
|
|
|
| If sign of fp number = 1 (negative), then add 1 to l.
|
|
|
|
|
rnd_mnus:
|
|
swap %d1 |set up d1 for round prec.
|
|
tstb LOCAL_SGN(%a0) |check for sign
|
|
bpl truncate |if negative then truncate
|
|
movel #0xffffffff,%d0 |force g,r,s to be all f's
|
|
lea add_to_l,%a1
|
|
movel (%a1,%d1.w*4),%a1
|
|
jmp (%a1)
|
|
|
|
|
| ROUND ZERO
|
|
|
|
|
| Always truncate.
|
|
rnd_zero:
|
|
swap %d1 |set up d1 for round prec.
|
|
bra truncate
|
|
|
|
|
|
|
|
| ROUND NEAREST
|
|
|
|
|
| If (g=1), then add 1 to l and if (r=s=0), then clear l
|
|
| Note that this will round to even in case of a tie.
|
|
|
|
|
rnd_near:
|
|
swap %d1 |set up d1 for round prec.
|
|
asll #1,%d0 |shift g-bit to c-bit
|
|
bcc truncate |if (g=1) then
|
|
lea add_to_l,%a1
|
|
movel (%a1,%d1.w*4),%a1
|
|
jmp (%a1)
|
|
|
|
|
|
|
| ext_grs --- extract guard, round and sticky bits
|
|
|
|
|
| Input: d1 = PREC:ROUND
|
|
| Output: d0{31:29}= guard, round, sticky
|
|
|
|
|
| The ext_grs extract the guard/round/sticky bits according to the
|
|
| selected rounding precision. It is called by the round subroutine
|
|
| only. All registers except d0 are kept intact. d0 becomes an
|
|
| updated guard,round,sticky in d0{31:29}
|
|
|
|
|
| Notes: the ext_grs uses the round PREC, and therefore has to swap d1
|
|
| prior to usage, and needs to restore d1 to original.
|
|
|
|
|
ext_grs:
|
|
swap %d1 |have d1.w point to round precision
|
|
cmpiw #0,%d1
|
|
bnes sgl_or_dbl
|
|
bras end_ext_grs
|
|
|
|
sgl_or_dbl:
|
|
moveml %d2/%d3,-(%a7) |make some temp registers
|
|
cmpiw #1,%d1
|
|
bnes grs_dbl
|
|
grs_sgl:
|
|
bfextu LOCAL_HI(%a0){#24:#2},%d3 |sgl prec. g-r are 2 bits right
|
|
movel #30,%d2 |of the sgl prec. limits
|
|
lsll %d2,%d3 |shift g-r bits to MSB of d3
|
|
movel LOCAL_HI(%a0),%d2 |get word 2 for s-bit test
|
|
andil #0x0000003f,%d2 |s bit is the or of all other
|
|
bnes st_stky |bits to the right of g-r
|
|
tstl LOCAL_LO(%a0) |test lower mantissa
|
|
bnes st_stky |if any are set, set sticky
|
|
tstl %d0 |test original g,r,s
|
|
bnes st_stky |if any are set, set sticky
|
|
bras end_sd |if words 3 and 4 are clr, exit
|
|
grs_dbl:
|
|
bfextu LOCAL_LO(%a0){#21:#2},%d3 |dbl-prec. g-r are 2 bits right
|
|
movel #30,%d2 |of the dbl prec. limits
|
|
lsll %d2,%d3 |shift g-r bits to the MSB of d3
|
|
movel LOCAL_LO(%a0),%d2 |get lower mantissa for s-bit test
|
|
andil #0x000001ff,%d2 |s bit is the or-ing of all
|
|
bnes st_stky |other bits to the right of g-r
|
|
tstl %d0 |test word original g,r,s
|
|
bnes st_stky |if any are set, set sticky
|
|
bras end_sd |if clear, exit
|
|
st_stky:
|
|
bset #rnd_stky_bit,%d3
|
|
end_sd:
|
|
movel %d3,%d0 |return grs to d0
|
|
moveml (%a7)+,%d2/%d3 |restore scratch registers
|
|
end_ext_grs:
|
|
swap %d1 |restore d1 to original
|
|
rts
|
|
|
|
|******************* Local Equates
|
|
.set ad_1_sgl,0x00000100 | constant to add 1 to l-bit in sgl prec
|
|
.set ad_1_dbl,0x00000800 | constant to add 1 to l-bit in dbl prec
|
|
|
|
|
|
|Jump table for adding 1 to the l-bit indexed by rnd prec
|
|
|
|
add_to_l:
|
|
.long add_ext
|
|
.long add_sgl
|
|
.long add_dbl
|
|
.long add_dbl
|
|
|
|
|
| ADD SINGLE
|
|
|
|
|
add_sgl:
|
|
addl #ad_1_sgl,LOCAL_HI(%a0)
|
|
bccs scc_clr |no mantissa overflow
|
|
roxrw LOCAL_HI(%a0) |shift v-bit back in
|
|
roxrw LOCAL_HI+2(%a0) |shift v-bit back in
|
|
addw #0x1,LOCAL_EX(%a0) |and incr exponent
|
|
scc_clr:
|
|
tstl %d0 |test for rs = 0
|
|
bnes sgl_done
|
|
andiw #0xfe00,LOCAL_HI+2(%a0) |clear the l-bit
|
|
sgl_done:
|
|
andil #0xffffff00,LOCAL_HI(%a0) |truncate bits beyond sgl limit
|
|
clrl LOCAL_LO(%a0) |clear d2
|
|
rts
|
|
|
|
|
|
|
| ADD EXTENDED
|
|
|
|
|
add_ext:
|
|
addql #1,LOCAL_LO(%a0) |add 1 to l-bit
|
|
bccs xcc_clr |test for carry out
|
|
addql #1,LOCAL_HI(%a0) |propagate carry
|
|
bccs xcc_clr
|
|
roxrw LOCAL_HI(%a0) |mant is 0 so restore v-bit
|
|
roxrw LOCAL_HI+2(%a0) |mant is 0 so restore v-bit
|
|
roxrw LOCAL_LO(%a0)
|
|
roxrw LOCAL_LO+2(%a0)
|
|
addw #0x1,LOCAL_EX(%a0) |and inc exp
|
|
xcc_clr:
|
|
tstl %d0 |test rs = 0
|
|
bnes add_ext_done
|
|
andib #0xfe,LOCAL_LO+3(%a0) |clear the l bit
|
|
add_ext_done:
|
|
rts
|
|
|
|
|
| ADD DOUBLE
|
|
|
|
|
add_dbl:
|
|
addl #ad_1_dbl,LOCAL_LO(%a0)
|
|
bccs dcc_clr
|
|
addql #1,LOCAL_HI(%a0) |propagate carry
|
|
bccs dcc_clr
|
|
roxrw LOCAL_HI(%a0) |mant is 0 so restore v-bit
|
|
roxrw LOCAL_HI+2(%a0) |mant is 0 so restore v-bit
|
|
roxrw LOCAL_LO(%a0)
|
|
roxrw LOCAL_LO+2(%a0)
|
|
addw #0x1,LOCAL_EX(%a0) |incr exponent
|
|
dcc_clr:
|
|
tstl %d0 |test for rs = 0
|
|
bnes dbl_done
|
|
andiw #0xf000,LOCAL_LO+2(%a0) |clear the l-bit
|
|
|
|
dbl_done:
|
|
andil #0xfffff800,LOCAL_LO(%a0) |truncate bits beyond dbl limit
|
|
rts
|
|
|
|
error:
|
|
rts
|
|
|
|
|
| Truncate all other bits
|
|
|
|
|
trunct:
|
|
.long end_rnd
|
|
.long sgl_done
|
|
.long dbl_done
|
|
.long dbl_done
|
|
|
|
truncate:
|
|
lea trunct,%a1
|
|
movel (%a1,%d1.w*4),%a1
|
|
jmp (%a1)
|
|
|
|
end_rnd:
|
|
rts
|
|
|
|
|
|
|
| NORMALIZE
|
|
|
|
|
| These routines (nrm_zero & nrm_set) normalize the unnorm. This
|
|
| is done by shifting the mantissa left while decrementing the
|
|
| exponent.
|
|
|
|
|
| NRM_SET shifts and decrements until there is a 1 set in the integer
|
|
| bit of the mantissa (msb in d1).
|
|
|
|
|
| NRM_ZERO shifts and decrements until there is a 1 set in the integer
|
|
| bit of the mantissa (msb in d1) unless this would mean the exponent
|
|
| would go less than 0. In that case the number becomes a denorm - the
|
|
| exponent (d0) is set to 0 and the mantissa (d1 & d2) is not
|
|
| normalized.
|
|
|
|
|
| Note that both routines have been optimized (for the worst case) and
|
|
| therefore do not have the easy to follow decrement/shift loop.
|
|
|
|
|
| NRM_ZERO
|
|
|
|
|
| Distance to first 1 bit in mantissa = X
|
|
| Distance to 0 from exponent = Y
|
|
| If X < Y
|
|
| Then
|
|
| nrm_set
|
|
| Else
|
|
| shift mantissa by Y
|
|
| set exponent = 0
|
|
|
|
|
|input:
|
|
| FP_SCR1 = exponent, ms mantissa part, ls mantissa part
|
|
|output:
|
|
| L_SCR1{4} = fpte15 or ete15 bit
|
|
|
|
|
.global nrm_zero
|
|
nrm_zero:
|
|
movew LOCAL_EX(%a0),%d0
|
|
cmpw #64,%d0 |see if exp > 64
|
|
bmis d0_less
|
|
bsr nrm_set |exp > 64 so exp won't exceed 0
|
|
rts
|
|
d0_less:
|
|
moveml %d2/%d3/%d5/%d6,-(%a7)
|
|
movel LOCAL_HI(%a0),%d1
|
|
movel LOCAL_LO(%a0),%d2
|
|
|
|
bfffo %d1{#0:#32},%d3 |get the distance to the first 1
|
|
| ;in ms mant
|
|
beqs ms_clr |branch if no bits were set
|
|
cmpw %d3,%d0 |of X>Y
|
|
bmis greater |then exp will go past 0 (neg) if
|
|
| ;it is just shifted
|
|
bsr nrm_set |else exp won't go past 0
|
|
moveml (%a7)+,%d2/%d3/%d5/%d6
|
|
rts
|
|
greater:
|
|
movel %d2,%d6 |save ls mant in d6
|
|
lsll %d0,%d2 |shift ls mant by count
|
|
lsll %d0,%d1 |shift ms mant by count
|
|
movel #32,%d5
|
|
subl %d0,%d5 |make op a denorm by shifting bits
|
|
lsrl %d5,%d6 |by the number in the exp, then
|
|
| ;set exp = 0.
|
|
orl %d6,%d1 |shift the ls mant bits into the ms mant
|
|
movel #0,%d0 |same as if decremented exp to 0
|
|
| ;while shifting
|
|
movew %d0,LOCAL_EX(%a0)
|
|
movel %d1,LOCAL_HI(%a0)
|
|
movel %d2,LOCAL_LO(%a0)
|
|
moveml (%a7)+,%d2/%d3/%d5/%d6
|
|
rts
|
|
ms_clr:
|
|
bfffo %d2{#0:#32},%d3 |check if any bits set in ls mant
|
|
beqs all_clr |branch if none set
|
|
addw #32,%d3
|
|
cmpw %d3,%d0 |if X>Y
|
|
bmis greater |then branch
|
|
bsr nrm_set |else exp won't go past 0
|
|
moveml (%a7)+,%d2/%d3/%d5/%d6
|
|
rts
|
|
all_clr:
|
|
movew #0,LOCAL_EX(%a0) |no mantissa bits set. Set exp = 0.
|
|
moveml (%a7)+,%d2/%d3/%d5/%d6
|
|
rts
|
|
|
|
|
| NRM_SET
|
|
|
|
|
.global nrm_set
|
|
nrm_set:
|
|
movel %d7,-(%a7)
|
|
bfffo LOCAL_HI(%a0){#0:#32},%d7 |find first 1 in ms mant to d7)
|
|
beqs lower |branch if ms mant is all 0's
|
|
|
|
movel %d6,-(%a7)
|
|
|
|
subw %d7,LOCAL_EX(%a0) |sub exponent by count
|
|
movel LOCAL_HI(%a0),%d0 |d0 has ms mant
|
|
movel LOCAL_LO(%a0),%d1 |d1 has ls mant
|
|
|
|
lsll %d7,%d0 |shift first 1 to j bit position
|
|
movel %d1,%d6 |copy ls mant into d6
|
|
lsll %d7,%d6 |shift ls mant by count
|
|
movel %d6,LOCAL_LO(%a0) |store ls mant into memory
|
|
moveql #32,%d6
|
|
subl %d7,%d6 |continue shift
|
|
lsrl %d6,%d1 |shift off all bits but those that will
|
|
| ;be shifted into ms mant
|
|
orl %d1,%d0 |shift the ls mant bits into the ms mant
|
|
movel %d0,LOCAL_HI(%a0) |store ms mant into memory
|
|
moveml (%a7)+,%d7/%d6 |restore registers
|
|
rts
|
|
|
|
|
|
|
| We get here if ms mant was = 0, and we assume ls mant has bits
|
|
| set (otherwise this would have been tagged a zero not a denorm).
|
|
|
|
|
lower:
|
|
movew LOCAL_EX(%a0),%d0 |d0 has exponent
|
|
movel LOCAL_LO(%a0),%d1 |d1 has ls mant
|
|
subw #32,%d0 |account for ms mant being all zeros
|
|
bfffo %d1{#0:#32},%d7 |find first 1 in ls mant to d7)
|
|
subw %d7,%d0 |subtract shift count from exp
|
|
lsll %d7,%d1 |shift first 1 to integer bit in ms mant
|
|
movew %d0,LOCAL_EX(%a0) |store ms mant
|
|
movel %d1,LOCAL_HI(%a0) |store exp
|
|
clrl LOCAL_LO(%a0) |clear ls mant
|
|
movel (%a7)+,%d7
|
|
rts
|
|
|
|
|
| denorm --- denormalize an intermediate result
|
|
|
|
|
| Used by underflow.
|
|
|
|
|
| Input:
|
|
| a0 points to the operand to be denormalized
|
|
| (in the internal extended format)
|
|
|
|
|
| d0: rounding precision
|
|
| Output:
|
|
| a0 points to the denormalized result
|
|
| (in the internal extended format)
|
|
|
|
|
| d0 is guard,round,sticky
|
|
|
|
|
| d0 comes into this routine with the rounding precision. It
|
|
| is then loaded with the denormalized exponent threshold for the
|
|
| rounding precision.
|
|
|
|
|
|
|
.global denorm
|
|
denorm:
|
|
btstb #6,LOCAL_EX(%a0) |check for exponents between $7fff-$4000
|
|
beqs no_sgn_ext
|
|
bsetb #7,LOCAL_EX(%a0) |sign extend if it is so
|
|
no_sgn_ext:
|
|
|
|
cmpib #0,%d0 |if 0 then extended precision
|
|
bnes not_ext |else branch
|
|
|
|
clrl %d1 |load d1 with ext threshold
|
|
clrl %d0 |clear the sticky flag
|
|
bsr dnrm_lp |denormalize the number
|
|
tstb %d1 |check for inex
|
|
beq no_inex |if clr, no inex
|
|
bras dnrm_inex |if set, set inex
|
|
|
|
not_ext:
|
|
cmpil #1,%d0 |if 1 then single precision
|
|
beqs load_sgl |else must be 2, double prec
|
|
|
|
load_dbl:
|
|
movew #dbl_thresh,%d1 |put copy of threshold in d1
|
|
movel %d1,%d0 |copy d1 into d0
|
|
subw LOCAL_EX(%a0),%d0 |diff = threshold - exp
|
|
cmpw #67,%d0 |if diff > 67 (mant + grs bits)
|
|
bpls chk_stky |then branch (all bits would be
|
|
| ; shifted off in denorm routine)
|
|
clrl %d0 |else clear the sticky flag
|
|
bsr dnrm_lp |denormalize the number
|
|
tstb %d1 |check flag
|
|
beqs no_inex |if clr, no inex
|
|
bras dnrm_inex |if set, set inex
|
|
|
|
load_sgl:
|
|
movew #sgl_thresh,%d1 |put copy of threshold in d1
|
|
movel %d1,%d0 |copy d1 into d0
|
|
subw LOCAL_EX(%a0),%d0 |diff = threshold - exp
|
|
cmpw #67,%d0 |if diff > 67 (mant + grs bits)
|
|
bpls chk_stky |then branch (all bits would be
|
|
| ; shifted off in denorm routine)
|
|
clrl %d0 |else clear the sticky flag
|
|
bsr dnrm_lp |denormalize the number
|
|
tstb %d1 |check flag
|
|
beqs no_inex |if clr, no inex
|
|
bras dnrm_inex |if set, set inex
|
|
|
|
chk_stky:
|
|
tstl LOCAL_HI(%a0) |check for any bits set
|
|
bnes set_stky
|
|
tstl LOCAL_LO(%a0) |check for any bits set
|
|
bnes set_stky
|
|
bras clr_mant
|
|
set_stky:
|
|
orl #inx2a_mask,USER_FPSR(%a6) |set inex2/ainex
|
|
movel #0x20000000,%d0 |set sticky bit in return value
|
|
clr_mant:
|
|
movew %d1,LOCAL_EX(%a0) |load exp with threshold
|
|
movel #0,LOCAL_HI(%a0) |set d1 = 0 (ms mantissa)
|
|
movel #0,LOCAL_LO(%a0) |set d2 = 0 (ms mantissa)
|
|
rts
|
|
dnrm_inex:
|
|
orl #inx2a_mask,USER_FPSR(%a6) |set inex2/ainex
|
|
no_inex:
|
|
rts
|
|
|
|
|
|
|
| dnrm_lp --- normalize exponent/mantissa to specified threshold
|
|
|
|
|
| Input:
|
|
| a0 points to the operand to be denormalized
|
|
| d0{31:29} initial guard,round,sticky
|
|
| d1{15:0} denormalization threshold
|
|
| Output:
|
|
| a0 points to the denormalized operand
|
|
| d0{31:29} final guard,round,sticky
|
|
| d1.b inexact flag: all ones means inexact result
|
|
|
|
|
| The LOCAL_LO and LOCAL_GRS parts of the value are copied to FP_SCR2
|
|
| so that bfext can be used to extract the new low part of the mantissa.
|
|
| Dnrm_lp can be called with a0 pointing to ETEMP or WBTEMP and there
|
|
| is no LOCAL_GRS scratch word following it on the fsave frame.
|
|
|
|
|
.global dnrm_lp
|
|
dnrm_lp:
|
|
movel %d2,-(%sp) |save d2 for temp use
|
|
btstb #E3,E_BYTE(%a6) |test for type E3 exception
|
|
beqs not_E3 |not type E3 exception
|
|
bfextu WBTEMP_GRS(%a6){#6:#3},%d2 |extract guard,round, sticky bit
|
|
movel #29,%d0
|
|
lsll %d0,%d2 |shift g,r,s to their positions
|
|
movel %d2,%d0
|
|
not_E3:
|
|
movel (%sp)+,%d2 |restore d2
|
|
movel LOCAL_LO(%a0),FP_SCR2+LOCAL_LO(%a6)
|
|
movel %d0,FP_SCR2+LOCAL_GRS(%a6)
|
|
movel %d1,%d0 |copy the denorm threshold
|
|
subw LOCAL_EX(%a0),%d1 |d1 = threshold - uns exponent
|
|
bles no_lp |d1 <= 0
|
|
cmpw #32,%d1
|
|
blts case_1 |0 = d1 < 32
|
|
cmpw #64,%d1
|
|
blts case_2 |32 <= d1 < 64
|
|
bra case_3 |d1 >= 64
|
|
|
|
|
| No normalization necessary
|
|
|
|
|
no_lp:
|
|
clrb %d1 |set no inex2 reported
|
|
movel FP_SCR2+LOCAL_GRS(%a6),%d0 |restore original g,r,s
|
|
rts
|
|
|
|
|
| case (0<d1<32)
|
|
|
|
|
case_1:
|
|
movel %d2,-(%sp)
|
|
movew %d0,LOCAL_EX(%a0) |exponent = denorm threshold
|
|
movel #32,%d0
|
|
subw %d1,%d0 |d0 = 32 - d1
|
|
bfextu LOCAL_EX(%a0){%d0:#32},%d2
|
|
bfextu %d2{%d1:%d0},%d2 |d2 = new LOCAL_HI
|
|
bfextu LOCAL_HI(%a0){%d0:#32},%d1 |d1 = new LOCAL_LO
|
|
bfextu FP_SCR2+LOCAL_LO(%a6){%d0:#32},%d0 |d0 = new G,R,S
|
|
movel %d2,LOCAL_HI(%a0) |store new LOCAL_HI
|
|
movel %d1,LOCAL_LO(%a0) |store new LOCAL_LO
|
|
clrb %d1
|
|
bftst %d0{#2:#30}
|
|
beqs c1nstky
|
|
bsetl #rnd_stky_bit,%d0
|
|
st %d1
|
|
c1nstky:
|
|
movel FP_SCR2+LOCAL_GRS(%a6),%d2 |restore original g,r,s
|
|
andil #0xe0000000,%d2 |clear all but G,R,S
|
|
tstl %d2 |test if original G,R,S are clear
|
|
beqs grs_clear
|
|
orl #0x20000000,%d0 |set sticky bit in d0
|
|
grs_clear:
|
|
andil #0xe0000000,%d0 |clear all but G,R,S
|
|
movel (%sp)+,%d2
|
|
rts
|
|
|
|
|
| case (32<=d1<64)
|
|
|
|
|
case_2:
|
|
movel %d2,-(%sp)
|
|
movew %d0,LOCAL_EX(%a0) |unsigned exponent = threshold
|
|
subw #32,%d1 |d1 now between 0 and 32
|
|
movel #32,%d0
|
|
subw %d1,%d0 |d0 = 32 - d1
|
|
bfextu LOCAL_EX(%a0){%d0:#32},%d2
|
|
bfextu %d2{%d1:%d0},%d2 |d2 = new LOCAL_LO
|
|
bfextu LOCAL_HI(%a0){%d0:#32},%d1 |d1 = new G,R,S
|
|
bftst %d1{#2:#30}
|
|
bnes c2_sstky |bra if sticky bit to be set
|
|
bftst FP_SCR2+LOCAL_LO(%a6){%d0:#32}
|
|
bnes c2_sstky |bra if sticky bit to be set
|
|
movel %d1,%d0
|
|
clrb %d1
|
|
bras end_c2
|
|
c2_sstky:
|
|
movel %d1,%d0
|
|
bsetl #rnd_stky_bit,%d0
|
|
st %d1
|
|
end_c2:
|
|
clrl LOCAL_HI(%a0) |store LOCAL_HI = 0
|
|
movel %d2,LOCAL_LO(%a0) |store LOCAL_LO
|
|
movel FP_SCR2+LOCAL_GRS(%a6),%d2 |restore original g,r,s
|
|
andil #0xe0000000,%d2 |clear all but G,R,S
|
|
tstl %d2 |test if original G,R,S are clear
|
|
beqs clear_grs
|
|
orl #0x20000000,%d0 |set sticky bit in d0
|
|
clear_grs:
|
|
andil #0xe0000000,%d0 |get rid of all but G,R,S
|
|
movel (%sp)+,%d2
|
|
rts
|
|
|
|
|
| d1 >= 64 Force the exponent to be the denorm threshold with the
|
|
| correct sign.
|
|
|
|
|
case_3:
|
|
movew %d0,LOCAL_EX(%a0)
|
|
tstw LOCAL_SGN(%a0)
|
|
bges c3con
|
|
c3neg:
|
|
orl #0x80000000,LOCAL_EX(%a0)
|
|
c3con:
|
|
cmpw #64,%d1
|
|
beqs sixty_four
|
|
cmpw #65,%d1
|
|
beqs sixty_five
|
|
|
|
|
| Shift value is out of range. Set d1 for inex2 flag and
|
|
| return a zero with the given threshold.
|
|
|
|
|
clrl LOCAL_HI(%a0)
|
|
clrl LOCAL_LO(%a0)
|
|
movel #0x20000000,%d0
|
|
st %d1
|
|
rts
|
|
|
|
sixty_four:
|
|
movel LOCAL_HI(%a0),%d0
|
|
bfextu %d0{#2:#30},%d1
|
|
andil #0xc0000000,%d0
|
|
bras c3com
|
|
|
|
sixty_five:
|
|
movel LOCAL_HI(%a0),%d0
|
|
bfextu %d0{#1:#31},%d1
|
|
andil #0x80000000,%d0
|
|
lsrl #1,%d0 |shift high bit into R bit
|
|
|
|
c3com:
|
|
tstl %d1
|
|
bnes c3ssticky
|
|
tstl LOCAL_LO(%a0)
|
|
bnes c3ssticky
|
|
tstb FP_SCR2+LOCAL_GRS(%a6)
|
|
bnes c3ssticky
|
|
clrb %d1
|
|
bras c3end
|
|
|
|
c3ssticky:
|
|
bsetl #rnd_stky_bit,%d0
|
|
st %d1
|
|
c3end:
|
|
clrl LOCAL_HI(%a0)
|
|
clrl LOCAL_LO(%a0)
|
|
rts
|
|
|
|
|end
|