cb53c626e1
Added CONFIG_SND_HDA_POWER_SAVE kconfig. It's an experimental option to achieve an aggressive power-saving. With this option, the driver will turn on/off the power of each codec and controller chip dynamically on demand. The patch introduces a new module option 'power_save'. It specifies the second of time-out for automatic power-down. As default, it's 10 seconds. Setting 0 means to suppress the power-saving feature. The codec may have analog-input loopbacks, which are usually represented by mixer elements such as 'Mic Playback Switch' or 'CD Playback Switch'. When these are on, we cannot turn off the mixer and the codec chip has to be kept on. For bookkeeping these states, a new codec-callback is introduced. For the bus-controller side, a new callback pm_notify is introduced, which can be used to turn on/off the contoller appropriately. Note that this power-saving might cause slight click-noise at power-on/off. Also, it might take some time to wake up the codec, and might even drop some tones at the very beginning. This seems to be the side-effect of turning off the controller chip. This turn-off of the controller can be disabled by undefining HDA_POWER_SAVE_RESET_CONTOLLER in hda_intel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
891 lines
24 KiB
Text
891 lines
24 KiB
Text
# ALSA PCI drivers
|
|
|
|
menu "PCI devices"
|
|
depends on SND!=n && PCI
|
|
|
|
config SND_AD1889
|
|
tristate "Analog Devices AD1889"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated AC97 sound
|
|
device found in particular on the Hewlett-Packard [BCJ]-xxx0
|
|
class PA-RISC workstations, using the AD1819 codec.
|
|
|
|
To compile this as a module, choose M here: the module
|
|
will be called snd-ad1889.
|
|
|
|
config SND_ALS300
|
|
tristate "Avance Logic ALS300/ALS300+"
|
|
depends on SND
|
|
select SND_PCM
|
|
select SND_AC97_CODEC
|
|
select SND_OPL3_LIB
|
|
help
|
|
Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-als300
|
|
|
|
config SND_ALS4000
|
|
tristate "Avance Logic ALS4000"
|
|
depends on SND && ISA_DMA_API
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_PCM
|
|
select SND_SB_COMMON
|
|
help
|
|
Say Y here to include support for soundcards based on Avance Logic
|
|
ALS4000 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-als4000.
|
|
|
|
config SND_ALI5451
|
|
tristate "ALi M5451 PCI Audio Controller"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated AC97 sound
|
|
device on motherboards using the ALi M5451 Audio Controller
|
|
(M1535/M1535D/M1535+/M1535D+ south bridges). Newer chipsets
|
|
use the "Intel/SiS/nVidia/AMD/ALi AC97 Controller" driver.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ali5451.
|
|
|
|
config SND_ATIIXP
|
|
tristate "ATI IXP AC97 Controller"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated AC97 sound
|
|
device on motherboards with ATI chipsets (ATI IXP 150/200/250/
|
|
300/400).
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-atiixp.
|
|
|
|
config SND_ATIIXP_MODEM
|
|
tristate "ATI IXP Modem"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated MC97 modem on
|
|
motherboards with ATI chipsets (ATI IXP 150/200/250).
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-atiixp-modem.
|
|
|
|
config SND_AU8810
|
|
tristate "Aureal Advantage"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Aureal Advantage soundcards.
|
|
|
|
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
|
|
3D support code is in place, but not yet useable. For more info,
|
|
email the ALSA developer list, or <mjander@users.sourceforge.net>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-au8810.
|
|
|
|
config SND_AU8820
|
|
tristate "Aureal Vortex"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Aureal Vortex soundcards.
|
|
|
|
Supported features: Hardware Mixer and SRC. For more info, email
|
|
the ALSA developer list, or <mjander@users.sourceforge.net>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-au8820.
|
|
|
|
config SND_AU8830
|
|
tristate "Aureal Vortex 2"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Aureal Vortex 2 soundcards.
|
|
|
|
Supported features: Hardware Mixer, SRC, EQ and SPDIF output.
|
|
3D support code is in place, but not yet useable. For more info,
|
|
email the ALSA developer list, or <mjander@users.sourceforge.net>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-au8830.
|
|
|
|
config SND_AZT3328
|
|
tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)"
|
|
depends on SND && EXPERIMENTAL
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for Aztech AZF3328 (PCI168)
|
|
soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-azt3328.
|
|
|
|
config SND_BT87X
|
|
tristate "Bt87x Audio Capture"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
If you want to record audio from TV cards based on
|
|
Brooktree Bt878/Bt879 chips, say Y here and read
|
|
<file:Documentation/sound/alsa/Bt87x.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-bt87x.
|
|
|
|
config SND_BT87X_OVERCLOCK
|
|
bool "Bt87x Audio overclocking"
|
|
depends on SND_BT87X
|
|
help
|
|
Say Y here if 448000 Hz isn't enough for you and you want to
|
|
record from the analog input with up to 1792000 Hz.
|
|
|
|
Higher sample rates won't hurt your hardware, but audio
|
|
quality may suffer.
|
|
|
|
config SND_CA0106
|
|
tristate "SB Audigy LS / Live 24bit"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
select SND_RAWMIDI
|
|
help
|
|
Say Y here to include support for the Sound Blaster Audigy LS
|
|
and Live 24bit.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ca0106.
|
|
|
|
config SND_CMIPCI
|
|
tristate "C-Media 8738, 8338"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_PCM
|
|
help
|
|
If you want to use soundcards based on C-Media CMI8338 or CMI8738
|
|
chips, say Y here and read
|
|
<file:Documentation/sound/alsa/CMIPCI.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-cmipci.
|
|
|
|
config SND_CS4281
|
|
tristate "Cirrus Logic (Sound Fusion) CS4281"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_RAWMIDI
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Cirrus Logic CS4281 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-cs4281.
|
|
|
|
config SND_CS46XX
|
|
tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x"
|
|
depends on SND
|
|
select SND_RAWMIDI
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Cirrus Logic CS4610/CS4612/
|
|
CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-cs46xx.
|
|
|
|
config SND_CS46XX_NEW_DSP
|
|
bool "Cirrus Logic (Sound Fusion) New DSP support"
|
|
depends on SND_CS46XX
|
|
default y
|
|
help
|
|
Say Y here to use a new DSP image for SPDIF and dual codecs.
|
|
|
|
This works better than the old code, so say Y.
|
|
|
|
config SND_CS5530
|
|
tristate "CS5530 Audio"
|
|
depends on SND && ISA_DMA_API
|
|
select SND_SB16_DSP
|
|
help
|
|
Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-cs5530.
|
|
|
|
config SND_CS5535AUDIO
|
|
tristate "CS5535/CS5536 Audio"
|
|
depends on SND && X86 && !X86_64
|
|
select SND_PCM
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for audio on CS5535 chips. It is
|
|
referred to as NS CS5535 IO or AMD CS5535 IO companion in
|
|
various literature. This driver also supports the CS5536 audio
|
|
device. However, for both chips, on certain boards, you may
|
|
need to use ac97_quirk=hp_only if your board has physically
|
|
mapped headphone out to master output. If that works for you,
|
|
send lspci -vvv output to the mailing list so that your board
|
|
can be identified in the quirks list.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-cs5535audio.
|
|
|
|
config SND_DARLA20
|
|
tristate "(Echoaudio) Darla20"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Darla.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-darla20
|
|
|
|
config SND_GINA20
|
|
tristate "(Echoaudio) Gina20"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Gina.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-gina20
|
|
|
|
config SND_LAYLA20
|
|
tristate "(Echoaudio) Layla20"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Layla.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-layla20
|
|
|
|
config SND_DARLA24
|
|
tristate "(Echoaudio) Darla24"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Darla24.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-darla24
|
|
|
|
config SND_GINA24
|
|
tristate "(Echoaudio) Gina24"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Gina24.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-gina24
|
|
|
|
config SND_LAYLA24
|
|
tristate "(Echoaudio) Layla24"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Layla24.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-layla24
|
|
|
|
config SND_MONA
|
|
tristate "(Echoaudio) Mona"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Mona.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-mona
|
|
|
|
config SND_MIA
|
|
tristate "(Echoaudio) Mia"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-mia
|
|
|
|
config SND_ECHO3G
|
|
tristate "(Echoaudio) 3G cards"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-echo3g
|
|
|
|
config SND_INDIGO
|
|
tristate "(Echoaudio) Indigo"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Indigo.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-indigo
|
|
|
|
config SND_INDIGOIO
|
|
tristate "(Echoaudio) Indigo IO"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-indigoio
|
|
|
|
config SND_INDIGODJ
|
|
tristate "(Echoaudio) Indigo DJ"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_PCM
|
|
help
|
|
Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-indigodj
|
|
|
|
config SND_EMU10K1
|
|
tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_HWDEP
|
|
select SND_RAWMIDI
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y to include support for Sound Blaster PCI 512, Live!,
|
|
Audigy and E-mu APS (partially supported) soundcards.
|
|
|
|
The confusing multitude of mixer controls is documented in
|
|
<file:Documentation/sound/alsa/SB-Live-mixer.txt> and
|
|
<file:Documentation/sound/alsa/Audigy-mixer.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-emu10k1.
|
|
|
|
config SND_EMU10K1X
|
|
tristate "Emu10k1X (Dell OEM Version)"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
select SND_RAWMIDI
|
|
help
|
|
Say Y here to include support for the Dell OEM version of the
|
|
Sound Blaster Live!.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-emu10k1x.
|
|
|
|
config SND_ENS1370
|
|
tristate "(Creative) Ensoniq AudioPCI 1370"
|
|
depends on SND
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for Ensoniq AudioPCI ES1370 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ens1370.
|
|
|
|
config SND_ENS1371
|
|
tristate "(Creative) Ensoniq AudioPCI 1371/1373"
|
|
depends on SND
|
|
select SND_RAWMIDI
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Ensoniq AudioPCI ES1371 chips and
|
|
Sound Blaster PCI 64 or 128 soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ens1371.
|
|
|
|
config SND_ES1938
|
|
tristate "ESS ES1938/1946/1969 (Solo-1)"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on ESS Solo-1
|
|
(ES1938, ES1946, ES1969) chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-es1938.
|
|
|
|
config SND_ES1968
|
|
tristate "ESS ES1968/1978 (Maestro-1/2/2E)"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on ESS Maestro
|
|
1/2/2E chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-es1968.
|
|
|
|
config SND_FM801
|
|
tristate "ForteMedia FM801"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on the ForteMedia
|
|
FM801 chip.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-fm801.
|
|
|
|
config SND_FM801_TEA575X_BOOL
|
|
bool "ForteMedia FM801 + TEA5757 tuner"
|
|
depends on SND_FM801
|
|
help
|
|
Say Y here to include support for soundcards based on the ForteMedia
|
|
FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media
|
|
Forte SF256-PCS-02) into the snd-fm801 driver.
|
|
|
|
This will enable support for the old V4L1 API.
|
|
|
|
config SND_FM801_TEA575X
|
|
tristate
|
|
depends on SND_FM801_TEA575X_BOOL
|
|
default SND_FM801
|
|
select VIDEO_V4L1
|
|
select VIDEO_DEV
|
|
|
|
config SND_HDA_INTEL
|
|
tristate "Intel HD Audio"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for Intel "High Definition
|
|
Audio" (Azalia) motherboard devices.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-hda-intel.
|
|
|
|
config SND_HDA_HWDEP
|
|
bool "Build hwdep interface for HD-audio driver"
|
|
depends on SND_HDA_INTEL
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to build a hwdep interface for HD-audio driver.
|
|
This interface can be used for out-of-bound communication
|
|
with codecs for debugging purposes.
|
|
|
|
config SND_HDA_CODEC_REALTEK
|
|
bool "Build Realtek HD-audio codec support"
|
|
depends on SND_HDA_INTEL
|
|
default y
|
|
help
|
|
Say Y here to include Realtek HD-audio codec support in
|
|
snd-hda-intel driver, such as ALC880.
|
|
|
|
config SND_HDA_CODEC_ANALOG
|
|
bool "Build Analog Device HD-audio codec support"
|
|
depends on SND_HDA_INTEL
|
|
default y
|
|
help
|
|
Say Y here to include Analog Device HD-audio codec support in
|
|
snd-hda-intel driver, such as AD1986A.
|
|
|
|
config SND_HDA_CODEC_SIGMATEL
|
|
bool "Build IDT/Sigmatel HD-audio codec support"
|
|
depends on SND_HDA_INTEL
|
|
default y
|
|
help
|
|
Say Y here to include IDT (Sigmatel) HD-audio codec support in
|
|
snd-hda-intel driver, such as STAC9200.
|
|
|
|
config SND_HDA_CODEC_VIA
|
|
bool "Build VIA HD-audio codec support"
|
|
depends on SND_HDA_INTEL
|
|
default y
|
|
help
|
|
Say Y here to include VIA HD-audio codec support in
|
|
snd-hda-intel driver, such as VT1708.
|
|
|
|
config SND_HDA_CODEC_ATIHDMI
|
|
bool "Build ATI HDMI HD-audio codec support"
|
|
depends on SND_HDA_INTEL
|
|
default y
|
|
help
|
|
Say Y here to include ATI HDMI HD-audio codec support in
|
|
snd-hda-intel driver, such as ATI RS600 HDMI.
|
|
|
|
config SND_HDA_CODEC_CONEXANT
|
|
bool "Build Conexant HD-audio codec support"
|
|
depends on SND_HDA_INTEL
|
|
default y
|
|
help
|
|
Say Y here to include Conexant HD-audio codec support in
|
|
snd-hda-intel driver, such as CX20549.
|
|
|
|
config SND_HDA_CODEC_CMEDIA
|
|
bool "Build C-Media HD-audio codec support"
|
|
depends on SND_HDA_INTEL
|
|
default y
|
|
help
|
|
Say Y here to include C-Media HD-audio codec support in
|
|
snd-hda-intel driver, such as CMI9880.
|
|
|
|
config SND_HDA_CODEC_SI3054
|
|
bool "Build Silicon Labs 3054 HD-modem codec support"
|
|
depends on SND_HDA_INTEL
|
|
default y
|
|
help
|
|
Say Y here to include Silicon Labs 3054 HD-modem codec
|
|
(and compatibles) support in snd-hda-intel driver.
|
|
|
|
config SND_HDA_GENERIC
|
|
bool "Enable generic HD-audio codec parser"
|
|
depends on SND_HDA_INTEL
|
|
default y
|
|
help
|
|
Say Y here to enable the generic HD-audio codec parser
|
|
in snd-hda-intel driver.
|
|
|
|
config SND_HDA_POWER_SAVE
|
|
bool "Aggressive power-saving on HD-audio"
|
|
depends on SND_HDA_INTEL && EXPERIMENTAL
|
|
help
|
|
Say Y here to enable more aggressive power-saving mode on
|
|
HD-audio driver. The power-saving timeout can be configured
|
|
via power_save option or over sysfs on-the-fly.
|
|
|
|
config SND_HDSP
|
|
tristate "RME Hammerfall DSP Audio"
|
|
depends on SND
|
|
select SND_HWDEP
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for RME Hammerfall DSP Audio
|
|
soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-hdsp.
|
|
|
|
config SND_HDSPM
|
|
tristate "RME Hammerfall DSP MADI"
|
|
depends on SND
|
|
select SND_HWDEP
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for RME Hammerfall DSP MADI
|
|
soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-hdspm.
|
|
|
|
config SND_ICE1712
|
|
tristate "ICEnsemble ICE1712 (Envy24)"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on the
|
|
ICE1712 (Envy24) chip.
|
|
|
|
Currently supported hardware is: M-Audio Delta 1010(LT),
|
|
DiO 2496, 66, 44, 410, Audiophile 24/96; Digigram VX442;
|
|
TerraTec EWX 24/96, EWS 88MT, 88D, DMX 6Fire, Phase 88;
|
|
Hoontech SoundTrack DSP 24/Value/Media7.1; Event EZ8.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ice1712.
|
|
|
|
config SND_ICE1724
|
|
tristate "ICE/VT1724/1720 (Envy24HT/PT)"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on
|
|
ICE/VT1724/1720 (Envy24HT/PT) chips.
|
|
|
|
Currently supported hardware is: AMP AUDIO2000; M-Audio
|
|
Revolution 7.1; TerraTec Aureon 5.1 Sky, 7.1 Space/Universe;
|
|
AudioTrak Prodigy 7.1; Pontis MS300; Albatron K8X800 Pro II;
|
|
Chaintech ZNF3-150/250.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ice1724.
|
|
|
|
config SND_INTEL8X0
|
|
tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated AC97 sound
|
|
device on motherboards with Intel/SiS/nVidia/AMD chipsets, or
|
|
ALi chipsets using the M5455 Audio Controller. (There is a
|
|
separate driver for ALi M5451 Audio Controllers.)
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-intel8x0.
|
|
|
|
config SND_INTEL8X0M
|
|
tristate "Intel/SiS/nVidia/AMD MC97 Modem"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated MC97 modem on
|
|
motherboards with Intel/SiS/nVidia/AMD chipsets.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-intel8x0m.
|
|
|
|
config SND_KORG1212
|
|
tristate "Korg 1212 IO"
|
|
depends on SND
|
|
select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for Korg 1212IO soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-korg1212.
|
|
|
|
config SND_KORG1212_FIRMWARE_IN_KERNEL
|
|
bool "In-kernel firmware for Korg1212 driver"
|
|
depends on SND_KORG1212
|
|
default y
|
|
help
|
|
Say Y here to include the static firmware built in the kernel
|
|
for the Korg1212 driver. If you choose N here, you need to
|
|
install the firmware files from the alsa-firmware package.
|
|
|
|
config SND_MAESTRO3
|
|
tristate "ESS Allegro/Maestro3"
|
|
depends on SND
|
|
select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on ESS Maestro 3
|
|
(Allegro) chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-maestro3.
|
|
|
|
config SND_MAESTRO3_FIRMWARE_IN_KERNEL
|
|
bool "In-kernel firmware for Maestro3 driver"
|
|
depends on SND_MAESTRO3
|
|
default y
|
|
help
|
|
Say Y here to include the static firmware built in the kernel
|
|
for the Maestro3 driver. If you choose N here, you need to
|
|
install the firmware files from the alsa-firmware package.
|
|
|
|
config SND_MIXART
|
|
tristate "Digigram miXart"
|
|
depends on SND
|
|
select SND_HWDEP
|
|
select SND_PCM
|
|
help
|
|
If you want to use Digigram miXart soundcards, say Y here and
|
|
read <file:Documentation/sound/alsa/MIXART.txt>.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-mixart.
|
|
|
|
config SND_NM256
|
|
tristate "NeoMagic NM256AV/ZX"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for NeoMagic NM256AV/ZX chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-nm256.
|
|
|
|
config SND_PCXHR
|
|
tristate "Digigram PCXHR"
|
|
depends on SND
|
|
select SND_PCM
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for Digigram PCXHR boards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-pcxhr.
|
|
|
|
config SND_RIPTIDE
|
|
tristate "Conexant Riptide"
|
|
depends on SND
|
|
select FW_LOADER
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say 'Y' or 'M' to include support for Conexant Riptide chip.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-riptide
|
|
|
|
config SND_RME32
|
|
tristate "RME Digi32, 32/8, 32 PRO"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
Say Y to include support for RME Digi32, Digi32 PRO and
|
|
Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio
|
|
devices.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-rme32.
|
|
|
|
config SND_RME96
|
|
tristate "RME Digi96, 96/8, 96/8 PRO"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for RME Digi96, Digi96/8 and
|
|
Digi96/8 PRO/PAD/PST soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-rme96.
|
|
|
|
config SND_RME9652
|
|
tristate "RME Digi9652 (Hammerfall)"
|
|
depends on SND
|
|
select SND_PCM
|
|
help
|
|
Say Y here to include support for RME Hammerfall (RME
|
|
Digi9652/Digi9636) soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-rme9652.
|
|
|
|
config SND_SONICVIBES
|
|
tristate "S3 SonicVibes"
|
|
depends on SND
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on the S3
|
|
SonicVibes chip.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-sonicvibes.
|
|
|
|
config SND_TRIDENT
|
|
tristate "Trident 4D-Wave DX/NX; SiS 7018"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for soundcards based on Trident
|
|
4D-Wave DX/NX or SiS 7018 chips.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-trident.
|
|
|
|
config SND_VIA82XX
|
|
tristate "VIA 82C686A/B, 8233/8235 AC97 Controller"
|
|
depends on SND
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated AC97 sound
|
|
device on motherboards with VIA chipsets.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-via82xx.
|
|
|
|
config SND_VIA82XX_MODEM
|
|
tristate "VIA 82C686A/B, 8233 based Modems"
|
|
depends on SND
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for the integrated MC97 modem on
|
|
motherboards with VIA chipsets.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-via82xx-modem.
|
|
|
|
config SND_VX222
|
|
tristate "Digigram VX222"
|
|
depends on SND
|
|
select SND_VX_LIB
|
|
help
|
|
Say Y here to include support for Digigram VX222 soundcards.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-vx222.
|
|
|
|
config SND_YMFPCI
|
|
tristate "Yamaha YMF724/740/744/754"
|
|
depends on SND
|
|
select FW_LOADER if !SND_YMFPCI_FIRMWARE_IN_KERNEL
|
|
select SND_OPL3_LIB
|
|
select SND_MPU401_UART
|
|
select SND_AC97_CODEC
|
|
help
|
|
Say Y here to include support for Yamaha PCI audio chips -
|
|
YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-ymfpci.
|
|
|
|
config SND_YMFPCI_FIRMWARE_IN_KERNEL
|
|
bool "In-kernel firmware for YMFPCI driver"
|
|
depends on SND_YMFPCI
|
|
default y
|
|
help
|
|
Say Y here to include the static firmware built in the kernel
|
|
for the YMFPCI driver. If you choose N here, you need to
|
|
install the firmware files from the alsa-firmware package.
|
|
|
|
config SND_AC97_POWER_SAVE
|
|
bool "AC97 Power-Saving Mode"
|
|
depends on SND_AC97_CODEC && EXPERIMENTAL
|
|
default n
|
|
help
|
|
Say Y here to enable the aggressive power-saving support of
|
|
AC97 codecs. In this mode, the power-mode is dynamically
|
|
controlled at each open/close.
|
|
|
|
The mode is activated by passing power_save=1 option to
|
|
snd-ac97-codec driver. You can toggle it dynamically over
|
|
sysfs, too.
|
|
|
|
endmenu
|