dea74869f3
The dvb_frontend_ops is a pointer inside dvb_frontend. That's why every demod-driver is having a field of dvb_frontend_ops in its private-state-struct and using the reference for filling the pointer-field in dvb_frontend. - It saves at least two lines of code per demod-driver, - reduces object size (one less dereference per frontend_ops-access), - be coherent with dvb_tuner_ops, - makes it a little bit easier for newbies to understand how it works and - avoids stupid mistakes because you would have to copy the dvb_frontend_ops always, before you could assign the static pointer directly, which was dangerous. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
709 lines
16 KiB
C
709 lines
16 KiB
C
/*
|
|
Driver for Zarlink VP310/MT312 Satellite Channel Decoder
|
|
|
|
Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
References:
|
|
http://products.zarlink.com/product_profiles/MT312.htm
|
|
http://products.zarlink.com/product_profiles/SL1935.htm
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/string.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "dvb_frontend.h"
|
|
#include "mt312_priv.h"
|
|
#include "mt312.h"
|
|
|
|
|
|
struct mt312_state {
|
|
struct i2c_adapter* i2c;
|
|
/* configuration settings */
|
|
const struct mt312_config* config;
|
|
struct dvb_frontend frontend;
|
|
|
|
u8 id;
|
|
u8 frequency;
|
|
};
|
|
|
|
static int debug;
|
|
#define dprintk(args...) \
|
|
do { \
|
|
if (debug) printk(KERN_DEBUG "mt312: " args); \
|
|
} while (0)
|
|
|
|
#define MT312_SYS_CLK 90000000UL /* 90 MHz */
|
|
#define MT312_LPOWER_SYS_CLK 60000000UL /* 60 MHz */
|
|
#define MT312_PLL_CLK 10000000UL /* 10 MHz */
|
|
|
|
static int mt312_read(struct mt312_state* state, const enum mt312_reg_addr reg,
|
|
void *buf, const size_t count)
|
|
{
|
|
int ret;
|
|
struct i2c_msg msg[2];
|
|
u8 regbuf[1] = { reg };
|
|
|
|
msg[0].addr = state->config->demod_address;
|
|
msg[0].flags = 0;
|
|
msg[0].buf = regbuf;
|
|
msg[0].len = 1;
|
|
msg[1].addr = state->config->demod_address;
|
|
msg[1].flags = I2C_M_RD;
|
|
msg[1].buf = buf;
|
|
msg[1].len = count;
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 2);
|
|
|
|
if (ret != 2) {
|
|
printk(KERN_ERR "%s: ret == %d\n", __FUNCTION__, ret);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
if(debug) {
|
|
int i;
|
|
dprintk("R(%d):", reg & 0x7f);
|
|
for (i = 0; i < count; i++)
|
|
printk(" %02x", ((const u8 *) buf)[i]);
|
|
printk("\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_write(struct mt312_state* state, const enum mt312_reg_addr reg,
|
|
const void *src, const size_t count)
|
|
{
|
|
int ret;
|
|
u8 buf[count + 1];
|
|
struct i2c_msg msg;
|
|
|
|
if(debug) {
|
|
int i;
|
|
dprintk("W(%d):", reg & 0x7f);
|
|
for (i = 0; i < count; i++)
|
|
printk(" %02x", ((const u8 *) src)[i]);
|
|
printk("\n");
|
|
}
|
|
|
|
buf[0] = reg;
|
|
memcpy(&buf[1], src, count);
|
|
|
|
msg.addr = state->config->demod_address;
|
|
msg.flags = 0;
|
|
msg.buf = buf;
|
|
msg.len = count + 1;
|
|
|
|
ret = i2c_transfer(state->i2c, &msg, 1);
|
|
|
|
if (ret != 1) {
|
|
dprintk("%s: ret == %d\n", __FUNCTION__, ret);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int mt312_readreg(struct mt312_state* state,
|
|
const enum mt312_reg_addr reg, u8 *val)
|
|
{
|
|
return mt312_read(state, reg, val, 1);
|
|
}
|
|
|
|
static inline int mt312_writereg(struct mt312_state* state,
|
|
const enum mt312_reg_addr reg, const u8 val)
|
|
{
|
|
return mt312_write(state, reg, &val, 1);
|
|
}
|
|
|
|
static inline u32 mt312_div(u32 a, u32 b)
|
|
{
|
|
return (a + (b / 2)) / b;
|
|
}
|
|
|
|
static int mt312_reset(struct mt312_state* state, const u8 full)
|
|
{
|
|
return mt312_writereg(state, RESET, full ? 0x80 : 0x40);
|
|
}
|
|
|
|
static int mt312_get_inversion(struct mt312_state* state,
|
|
fe_spectral_inversion_t *i)
|
|
{
|
|
int ret;
|
|
u8 vit_mode;
|
|
|
|
if ((ret = mt312_readreg(state, VIT_MODE, &vit_mode)) < 0)
|
|
return ret;
|
|
|
|
if (vit_mode & 0x80) /* auto inversion was used */
|
|
*i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_get_symbol_rate(struct mt312_state* state, u32 *sr)
|
|
{
|
|
int ret;
|
|
u8 sym_rate_h;
|
|
u8 dec_ratio;
|
|
u16 sym_rat_op;
|
|
u16 monitor;
|
|
u8 buf[2];
|
|
|
|
if ((ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h)) < 0)
|
|
return ret;
|
|
|
|
if (sym_rate_h & 0x80) { /* symbol rate search was used */
|
|
if ((ret = mt312_writereg(state, MON_CTRL, 0x03)) < 0)
|
|
return ret;
|
|
|
|
if ((ret = mt312_read(state, MONITOR_H, buf, sizeof(buf))) < 0)
|
|
return ret;
|
|
|
|
monitor = (buf[0] << 8) | buf[1];
|
|
|
|
dprintk(KERN_DEBUG "sr(auto) = %u\n",
|
|
mt312_div(monitor * 15625, 4));
|
|
} else {
|
|
if ((ret = mt312_writereg(state, MON_CTRL, 0x05)) < 0)
|
|
return ret;
|
|
|
|
if ((ret = mt312_read(state, MONITOR_H, buf, sizeof(buf))) < 0)
|
|
return ret;
|
|
|
|
dec_ratio = ((buf[0] >> 5) & 0x07) * 32;
|
|
|
|
if ((ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf))) < 0)
|
|
return ret;
|
|
|
|
sym_rat_op = (buf[0] << 8) | buf[1];
|
|
|
|
dprintk(KERN_DEBUG "sym_rat_op=%d dec_ratio=%d\n",
|
|
sym_rat_op, dec_ratio);
|
|
dprintk(KERN_DEBUG "*sr(manual) = %lu\n",
|
|
(((MT312_PLL_CLK * 8192) / (sym_rat_op + 8192)) *
|
|
2) - dec_ratio);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_get_code_rate(struct mt312_state* state, fe_code_rate_t *cr)
|
|
{
|
|
const fe_code_rate_t fec_tab[8] =
|
|
{ FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8,
|
|
FEC_AUTO, FEC_AUTO };
|
|
|
|
int ret;
|
|
u8 fec_status;
|
|
|
|
if ((ret = mt312_readreg(state, FEC_STATUS, &fec_status)) < 0)
|
|
return ret;
|
|
|
|
*cr = fec_tab[(fec_status >> 4) & 0x07];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_initfe(struct dvb_frontend* fe)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 buf[2];
|
|
|
|
/* wake up */
|
|
if ((ret = mt312_writereg(state, CONFIG, (state->frequency == 60 ? 0x88 : 0x8c))) < 0)
|
|
return ret;
|
|
|
|
/* wait at least 150 usec */
|
|
udelay(150);
|
|
|
|
/* full reset */
|
|
if ((ret = mt312_reset(state, 1)) < 0)
|
|
return ret;
|
|
|
|
// Per datasheet, write correct values. 09/28/03 ACCJr.
|
|
// If we don't do this, we won't get FE_HAS_VITERBI in the VP310.
|
|
{
|
|
u8 buf_def[8]={0x14, 0x12, 0x03, 0x02, 0x01, 0x00, 0x00, 0x00};
|
|
|
|
if ((ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def))) < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* SYS_CLK */
|
|
buf[0] = mt312_div((state->frequency == 60 ? MT312_LPOWER_SYS_CLK : MT312_SYS_CLK) * 2, 1000000);
|
|
|
|
/* DISEQC_RATIO */
|
|
buf[1] = mt312_div(MT312_PLL_CLK, 15000 * 4);
|
|
|
|
if ((ret = mt312_write(state, SYS_CLK, buf, sizeof(buf))) < 0)
|
|
return ret;
|
|
|
|
if ((ret = mt312_writereg(state, SNR_THS_HIGH, 0x32)) < 0)
|
|
return ret;
|
|
|
|
if ((ret = mt312_writereg(state, OP_CTRL, 0x53)) < 0)
|
|
return ret;
|
|
|
|
/* TS_SW_LIM */
|
|
buf[0] = 0x8c;
|
|
buf[1] = 0x98;
|
|
|
|
if ((ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf))) < 0)
|
|
return ret;
|
|
|
|
if ((ret = mt312_writereg(state, CS_SW_LIM, 0x69)) < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_send_master_cmd(struct dvb_frontend* fe,
|
|
struct dvb_diseqc_master_cmd *c)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 diseqc_mode;
|
|
|
|
if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg)))
|
|
return -EINVAL;
|
|
|
|
if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0)
|
|
return ret;
|
|
|
|
if ((ret =
|
|
mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len)) < 0)
|
|
return ret;
|
|
|
|
if ((ret =
|
|
mt312_writereg(state, DISEQC_MODE,
|
|
(diseqc_mode & 0x40) | ((c->msg_len - 1) << 3)
|
|
| 0x04)) < 0)
|
|
return ret;
|
|
|
|
/* set DISEQC_MODE[2:0] to zero if a return message is expected */
|
|
if (c->msg[0] & 0x02)
|
|
if ((ret =
|
|
mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40))) < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_send_burst(struct dvb_frontend* fe, const fe_sec_mini_cmd_t c)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
const u8 mini_tab[2] = { 0x02, 0x03 };
|
|
|
|
int ret;
|
|
u8 diseqc_mode;
|
|
|
|
if (c > SEC_MINI_B)
|
|
return -EINVAL;
|
|
|
|
if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0)
|
|
return ret;
|
|
|
|
if ((ret =
|
|
mt312_writereg(state, DISEQC_MODE,
|
|
(diseqc_mode & 0x40) | mini_tab[c])) < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_set_tone(struct dvb_frontend* fe, const fe_sec_tone_mode_t t)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
const u8 tone_tab[2] = { 0x01, 0x00 };
|
|
|
|
int ret;
|
|
u8 diseqc_mode;
|
|
|
|
if (t > SEC_TONE_OFF)
|
|
return -EINVAL;
|
|
|
|
if ((ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode)) < 0)
|
|
return ret;
|
|
|
|
if ((ret =
|
|
mt312_writereg(state, DISEQC_MODE,
|
|
(diseqc_mode & 0x40) | tone_tab[t])) < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_set_voltage(struct dvb_frontend* fe, const fe_sec_voltage_t v)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
|
|
|
|
if (v > SEC_VOLTAGE_OFF)
|
|
return -EINVAL;
|
|
|
|
return mt312_writereg(state, DISEQC_MODE, volt_tab[v]);
|
|
}
|
|
|
|
static int mt312_read_status(struct dvb_frontend* fe, fe_status_t *s)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 status[3];
|
|
|
|
*s = 0;
|
|
|
|
if ((ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status))) < 0)
|
|
return ret;
|
|
|
|
dprintk(KERN_DEBUG "QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n", status[0], status[1], status[2]);
|
|
|
|
if (status[0] & 0xc0)
|
|
*s |= FE_HAS_SIGNAL; /* signal noise ratio */
|
|
if (status[0] & 0x04)
|
|
*s |= FE_HAS_CARRIER; /* qpsk carrier lock */
|
|
if (status[2] & 0x02)
|
|
*s |= FE_HAS_VITERBI; /* viterbi lock */
|
|
if (status[2] & 0x04)
|
|
*s |= FE_HAS_SYNC; /* byte align lock */
|
|
if (status[0] & 0x01)
|
|
*s |= FE_HAS_LOCK; /* qpsk lock */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_read_ber(struct dvb_frontend* fe, u32 *ber)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 buf[3];
|
|
|
|
if ((ret = mt312_read(state, RS_BERCNT_H, buf, 3)) < 0)
|
|
return ret;
|
|
|
|
*ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_read_signal_strength(struct dvb_frontend* fe, u16 *signal_strength)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 buf[3];
|
|
u16 agc;
|
|
s16 err_db;
|
|
|
|
if ((ret = mt312_read(state, AGC_H, buf, sizeof(buf))) < 0)
|
|
return ret;
|
|
|
|
agc = (buf[0] << 6) | (buf[1] >> 2);
|
|
err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6;
|
|
|
|
*signal_strength = agc;
|
|
|
|
dprintk(KERN_DEBUG "agc=%08x err_db=%hd\n", agc, err_db);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_read_snr(struct dvb_frontend* fe, u16 *snr)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 buf[2];
|
|
|
|
if ((ret = mt312_read(state, M_SNR_H, &buf, sizeof(buf))) < 0)
|
|
return ret;
|
|
|
|
*snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_read_ucblocks(struct dvb_frontend* fe, u32 *ubc)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 buf[2];
|
|
|
|
if ((ret = mt312_read(state, RS_UBC_H, &buf, sizeof(buf))) < 0)
|
|
return ret;
|
|
|
|
*ubc = (buf[0] << 8) | buf[1];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_set_frontend(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *p)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 buf[5], config_val;
|
|
u16 sr;
|
|
|
|
const u8 fec_tab[10] =
|
|
{ 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f };
|
|
const u8 inv_tab[3] = { 0x00, 0x40, 0x80 };
|
|
|
|
dprintk("%s: Freq %d\n", __FUNCTION__, p->frequency);
|
|
|
|
if ((p->frequency < fe->ops.info.frequency_min)
|
|
|| (p->frequency > fe->ops.info.frequency_max))
|
|
return -EINVAL;
|
|
|
|
if ((p->inversion < INVERSION_OFF)
|
|
|| (p->inversion > INVERSION_ON))
|
|
return -EINVAL;
|
|
|
|
if ((p->u.qpsk.symbol_rate < fe->ops.info.symbol_rate_min)
|
|
|| (p->u.qpsk.symbol_rate > fe->ops.info.symbol_rate_max))
|
|
return -EINVAL;
|
|
|
|
if ((p->u.qpsk.fec_inner < FEC_NONE)
|
|
|| (p->u.qpsk.fec_inner > FEC_AUTO))
|
|
return -EINVAL;
|
|
|
|
if ((p->u.qpsk.fec_inner == FEC_4_5)
|
|
|| (p->u.qpsk.fec_inner == FEC_8_9))
|
|
return -EINVAL;
|
|
|
|
switch (state->id) {
|
|
case ID_VP310:
|
|
// For now we will do this only for the VP310.
|
|
// It should be better for the mt312 as well, but tunning will be slower. ACCJr 09/29/03
|
|
ret = mt312_readreg(state, CONFIG, &config_val);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (p->u.qpsk.symbol_rate >= 30000000) //Note that 30MS/s should use 90MHz
|
|
{
|
|
if ((config_val & 0x0c) == 0x08) { //We are running 60MHz
|
|
state->frequency = 90;
|
|
if ((ret = mt312_initfe(fe)) < 0)
|
|
return ret;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if ((config_val & 0x0c) == 0x0C) { //We are running 90MHz
|
|
state->frequency = 60;
|
|
if ((ret = mt312_initfe(fe)) < 0)
|
|
return ret;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case ID_MT312:
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (fe->ops.tuner_ops.set_params) {
|
|
fe->ops.tuner_ops.set_params(fe, p);
|
|
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
|
|
}
|
|
|
|
/* sr = (u16)(sr * 256.0 / 1000000.0) */
|
|
sr = mt312_div(p->u.qpsk.symbol_rate * 4, 15625);
|
|
|
|
/* SYM_RATE */
|
|
buf[0] = (sr >> 8) & 0x3f;
|
|
buf[1] = (sr >> 0) & 0xff;
|
|
|
|
/* VIT_MODE */
|
|
buf[2] = inv_tab[p->inversion] | fec_tab[p->u.qpsk.fec_inner];
|
|
|
|
/* QPSK_CTRL */
|
|
buf[3] = 0x40; /* swap I and Q before QPSK demodulation */
|
|
|
|
if (p->u.qpsk.symbol_rate < 10000000)
|
|
buf[3] |= 0x04; /* use afc mode */
|
|
|
|
/* GO */
|
|
buf[4] = 0x01;
|
|
|
|
if ((ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf))) < 0)
|
|
return ret;
|
|
|
|
mt312_reset(state, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_get_frontend(struct dvb_frontend* fe,
|
|
struct dvb_frontend_parameters *p)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
|
|
if ((ret = mt312_get_inversion(state, &p->inversion)) < 0)
|
|
return ret;
|
|
|
|
if ((ret = mt312_get_symbol_rate(state, &p->u.qpsk.symbol_rate)) < 0)
|
|
return ret;
|
|
|
|
if ((ret = mt312_get_code_rate(state, &p->u.qpsk.fec_inner)) < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
|
|
{
|
|
struct mt312_state* state = fe->demodulator_priv;
|
|
|
|
if (enable) {
|
|
return mt312_writereg(state, GPP_CTRL, 0x40);
|
|
} else {
|
|
return mt312_writereg(state, GPP_CTRL, 0x00);
|
|
}
|
|
}
|
|
|
|
static int mt312_sleep(struct dvb_frontend* fe)
|
|
{
|
|
struct mt312_state *state = fe->demodulator_priv;
|
|
int ret;
|
|
u8 config;
|
|
|
|
/* reset all registers to defaults */
|
|
if ((ret = mt312_reset(state, 1)) < 0)
|
|
return ret;
|
|
|
|
if ((ret = mt312_readreg(state, CONFIG, &config)) < 0)
|
|
return ret;
|
|
|
|
/* enter standby */
|
|
if ((ret = mt312_writereg(state, CONFIG, config & 0x7f)) < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt312_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
|
|
{
|
|
fesettings->min_delay_ms = 50;
|
|
fesettings->step_size = 0;
|
|
fesettings->max_drift = 0;
|
|
return 0;
|
|
}
|
|
|
|
static void mt312_release(struct dvb_frontend* fe)
|
|
{
|
|
struct mt312_state* state = fe->demodulator_priv;
|
|
kfree(state);
|
|
}
|
|
|
|
static struct dvb_frontend_ops vp310_mt312_ops = {
|
|
|
|
.info = {
|
|
.name = "Zarlink ???? DVB-S",
|
|
.type = FE_QPSK,
|
|
.frequency_min = 950000,
|
|
.frequency_max = 2150000,
|
|
.frequency_stepsize = (MT312_PLL_CLK / 1000) / 128,
|
|
.symbol_rate_min = MT312_SYS_CLK / 128,
|
|
.symbol_rate_max = MT312_SYS_CLK / 2,
|
|
.caps =
|
|
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
|
|
FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
|
|
FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
|
|
FE_CAN_RECOVER
|
|
},
|
|
|
|
.release = mt312_release,
|
|
|
|
.init = mt312_initfe,
|
|
.sleep = mt312_sleep,
|
|
.i2c_gate_ctrl = mt312_i2c_gate_ctrl,
|
|
|
|
.set_frontend = mt312_set_frontend,
|
|
.get_frontend = mt312_get_frontend,
|
|
.get_tune_settings = mt312_get_tune_settings,
|
|
|
|
.read_status = mt312_read_status,
|
|
.read_ber = mt312_read_ber,
|
|
.read_signal_strength = mt312_read_signal_strength,
|
|
.read_snr = mt312_read_snr,
|
|
.read_ucblocks = mt312_read_ucblocks,
|
|
|
|
.diseqc_send_master_cmd = mt312_send_master_cmd,
|
|
.diseqc_send_burst = mt312_send_burst,
|
|
.set_tone = mt312_set_tone,
|
|
.set_voltage = mt312_set_voltage,
|
|
};
|
|
|
|
struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config,
|
|
struct i2c_adapter* i2c)
|
|
{
|
|
struct mt312_state* state = NULL;
|
|
|
|
/* allocate memory for the internal state */
|
|
state = kmalloc(sizeof(struct mt312_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
goto error;
|
|
|
|
/* setup the state */
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
|
|
/* check if the demod is there */
|
|
if (mt312_readreg(state, ID, &state->id) < 0)
|
|
goto error;
|
|
|
|
/* create dvb_frontend */
|
|
memcpy(&state->frontend.ops, &vp310_mt312_ops, sizeof(struct dvb_frontend_ops));
|
|
state->frontend.demodulator_priv = state;
|
|
|
|
switch (state->id) {
|
|
case ID_VP310:
|
|
strcpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S");
|
|
state->frequency = 90;
|
|
break;
|
|
case ID_MT312:
|
|
strcpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S");
|
|
state->frequency = 60;
|
|
break;
|
|
default:
|
|
printk (KERN_WARNING "Only Zarlink VP310/MT312 are supported chips.\n");
|
|
goto error;
|
|
}
|
|
|
|
return &state->frontend;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
|
|
module_param(debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
|
|
MODULE_DESCRIPTION("Zarlink VP310/MT312 DVB-S Demodulator driver");
|
|
MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
EXPORT_SYMBOL(vp310_mt312_attach);
|