android_kernel_motorola_sm6225/drivers/net/wireless/wl12xx/sdio.c
Ido Yariv 2da69b890f wl12xx: Switch to level trigger interrupts
The interrupt of the wl12xx is a level interrupt in nature, since the
interrupt line is not auto-reset. However, since resetting the interrupt
requires bus transactions, this cannot be done from an interrupt
context. Thus, requesting a level interrupt would require to disable the
irq and re-enable it after the HW is acknowledged. Since we now request
a threaded irq, this can also be done by specifying the IRQF_ONESHOT
flag.

Triggering on an edge can be problematic in some platforms, if the
sampling frequency is not sufficient for detecting very frequent
interrupts. In case an interrupt is missed, the driver will hang as the
interrupt line will stay high until it is acknowledged by the driver,
which will never happen.

Fix this by requesting a level triggered interrupt, with the
IRQF_ONESHOT flag.

Signed-off-by: Ido Yariv <ido@wizery.com>
Reviewed-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-03-03 16:10:46 +02:00

346 lines
7.7 KiB
C

/*
* This file is part of wl1271
*
* Copyright (C) 2009-2010 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/crc7.h>
#include <linux/vmalloc.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/gpio.h>
#include <linux/wl12xx.h>
#include <linux/pm_runtime.h>
#include "wl12xx.h"
#include "wl12xx_80211.h"
#include "io.h"
#ifndef SDIO_VENDOR_ID_TI
#define SDIO_VENDOR_ID_TI 0x0097
#endif
#ifndef SDIO_DEVICE_ID_TI_WL1271
#define SDIO_DEVICE_ID_TI_WL1271 0x4076
#endif
static const struct sdio_device_id wl1271_devices[] = {
{ SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) },
{}
};
MODULE_DEVICE_TABLE(sdio, wl1271_devices);
static inline struct sdio_func *wl_to_func(struct wl1271 *wl)
{
return wl->if_priv;
}
static struct device *wl1271_sdio_wl_to_dev(struct wl1271 *wl)
{
return &(wl_to_func(wl)->dev);
}
static irqreturn_t wl1271_hardirq(int irq, void *cookie)
{
struct wl1271 *wl = cookie;
unsigned long flags;
wl1271_debug(DEBUG_IRQ, "IRQ");
/* complete the ELP completion */
spin_lock_irqsave(&wl->wl_lock, flags);
set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags);
if (wl->elp_compl) {
complete(wl->elp_compl);
wl->elp_compl = NULL;
}
spin_unlock_irqrestore(&wl->wl_lock, flags);
return IRQ_WAKE_THREAD;
}
static void wl1271_sdio_disable_interrupts(struct wl1271 *wl)
{
disable_irq(wl->irq);
}
static void wl1271_sdio_enable_interrupts(struct wl1271 *wl)
{
enable_irq(wl->irq);
}
static void wl1271_sdio_reset(struct wl1271 *wl)
{
}
static void wl1271_sdio_init(struct wl1271 *wl)
{
}
static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
int ret;
struct sdio_func *func = wl_to_func(wl);
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
wl1271_debug(DEBUG_SDIO, "sdio read 52 addr 0x%x, byte 0x%02x",
addr, ((u8 *)buf)[0]);
} else {
if (fixed)
ret = sdio_readsb(func, buf, addr, len);
else
ret = sdio_memcpy_fromio(func, buf, addr, len);
wl1271_debug(DEBUG_SDIO, "sdio read 53 addr 0x%x, %zu bytes",
addr, len);
wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len);
}
if (ret)
wl1271_error("sdio read failed (%d)", ret);
}
static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
size_t len, bool fixed)
{
int ret;
struct sdio_func *func = wl_to_func(wl);
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
wl1271_debug(DEBUG_SDIO, "sdio write 52 addr 0x%x, byte 0x%02x",
addr, ((u8 *)buf)[0]);
} else {
wl1271_debug(DEBUG_SDIO, "sdio write 53 addr 0x%x, %zu bytes",
addr, len);
wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len);
if (fixed)
ret = sdio_writesb(func, addr, buf, len);
else
ret = sdio_memcpy_toio(func, addr, buf, len);
}
if (ret)
wl1271_error("sdio write failed (%d)", ret);
}
static int wl1271_sdio_power_on(struct wl1271 *wl)
{
struct sdio_func *func = wl_to_func(wl);
int ret;
/* Make sure the card will not be powered off by runtime PM */
ret = pm_runtime_get_sync(&func->dev);
if (ret < 0)
goto out;
/* Runtime PM might be disabled, so power up the card manually */
ret = mmc_power_restore_host(func->card->host);
if (ret < 0)
goto out;
sdio_claim_host(func);
sdio_enable_func(func);
out:
return ret;
}
static int wl1271_sdio_power_off(struct wl1271 *wl)
{
struct sdio_func *func = wl_to_func(wl);
int ret;
sdio_disable_func(func);
sdio_release_host(func);
/* Runtime PM might be disabled, so power off the card manually */
ret = mmc_power_save_host(func->card->host);
if (ret < 0)
return ret;
/* Let runtime PM know the card is powered off */
return pm_runtime_put_sync(&func->dev);
}
static int wl1271_sdio_set_power(struct wl1271 *wl, bool enable)
{
if (enable)
return wl1271_sdio_power_on(wl);
else
return wl1271_sdio_power_off(wl);
}
static struct wl1271_if_operations sdio_ops = {
.read = wl1271_sdio_raw_read,
.write = wl1271_sdio_raw_write,
.reset = wl1271_sdio_reset,
.init = wl1271_sdio_init,
.power = wl1271_sdio_set_power,
.dev = wl1271_sdio_wl_to_dev,
.enable_irq = wl1271_sdio_enable_interrupts,
.disable_irq = wl1271_sdio_disable_interrupts
};
static int __devinit wl1271_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
struct ieee80211_hw *hw;
const struct wl12xx_platform_data *wlan_data;
struct wl1271 *wl;
int ret;
/* We are only able to handle the wlan function */
if (func->num != 0x02)
return -ENODEV;
hw = wl1271_alloc_hw();
if (IS_ERR(hw))
return PTR_ERR(hw);
wl = hw->priv;
wl->if_priv = func;
wl->if_ops = &sdio_ops;
/* Grab access to FN0 for ELP reg. */
func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
wlan_data = wl12xx_get_platform_data();
if (IS_ERR(wlan_data)) {
ret = PTR_ERR(wlan_data);
wl1271_error("missing wlan platform data: %d", ret);
goto out_free;
}
wl->irq = wlan_data->irq;
wl->ref_clock = wlan_data->board_ref_clock;
ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
DRIVER_NAME, wl);
if (ret < 0) {
wl1271_error("request_irq() failed: %d", ret);
goto out_free;
}
disable_irq(wl->irq);
ret = wl1271_init_ieee80211(wl);
if (ret)
goto out_irq;
ret = wl1271_register_hw(wl);
if (ret)
goto out_irq;
sdio_set_drvdata(func, wl);
/* Tell PM core that we don't need the card to be powered now */
pm_runtime_put_noidle(&func->dev);
wl1271_notice("initialized");
return 0;
out_irq:
free_irq(wl->irq, wl);
out_free:
wl1271_free_hw(wl);
return ret;
}
static void __devexit wl1271_remove(struct sdio_func *func)
{
struct wl1271 *wl = sdio_get_drvdata(func);
/* Undo decrement done above in wl1271_probe */
pm_runtime_get_noresume(&func->dev);
wl1271_unregister_hw(wl);
free_irq(wl->irq, wl);
wl1271_free_hw(wl);
}
static int wl1271_suspend(struct device *dev)
{
/* Tell MMC/SDIO core it's OK to power down the card
* (if it isn't already), but not to remove it completely */
return 0;
}
static int wl1271_resume(struct device *dev)
{
return 0;
}
static const struct dev_pm_ops wl1271_sdio_pm_ops = {
.suspend = wl1271_suspend,
.resume = wl1271_resume,
};
static struct sdio_driver wl1271_sdio_driver = {
.name = "wl1271_sdio",
.id_table = wl1271_devices,
.probe = wl1271_probe,
.remove = __devexit_p(wl1271_remove),
.drv = {
.pm = &wl1271_sdio_pm_ops,
},
};
static int __init wl1271_init(void)
{
int ret;
ret = sdio_register_driver(&wl1271_sdio_driver);
if (ret < 0) {
wl1271_error("failed to register sdio driver: %d", ret);
goto out;
}
out:
return ret;
}
static void __exit wl1271_exit(void)
{
sdio_unregister_driver(&wl1271_sdio_driver);
wl1271_notice("unloaded");
}
module_init(wl1271_init);
module_exit(wl1271_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
MODULE_FIRMWARE(WL1271_FW_NAME);
MODULE_FIRMWARE(WL1271_AP_FW_NAME);