android_kernel_motorola_sm6225/drivers/video/geode/display_gx1.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

214 lines
6.2 KiB
C

/*
* drivers/video/geode/display_gx1.c
* -- Geode GX1 display controller
*
* Copyright (C) 2005 Arcom Control Systems Ltd.
*
* Based on AMD's original 2.4 driver:
* Copyright (C) 2004 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/spinlock.h>
#include <linux/fb.h>
#include <linux/delay.h>
#include <asm/io.h>
#include <asm/div64.h>
#include <asm/delay.h>
#include "geodefb.h"
#include "display_gx1.h"
static spinlock_t gx1_conf_reg_lock = SPIN_LOCK_UNLOCKED;
static u8 gx1_read_conf_reg(u8 reg)
{
u8 val, ccr3;
unsigned long flags;
spin_lock_irqsave(&gx1_conf_reg_lock, flags);
outb(CONFIG_CCR3, 0x22);
ccr3 = inb(0x23);
outb(CONFIG_CCR3, 0x22);
outb(ccr3 | CONFIG_CCR3_MAPEN, 0x23);
outb(reg, 0x22);
val = inb(0x23);
outb(CONFIG_CCR3, 0x22);
outb(ccr3, 0x23);
spin_unlock_irqrestore(&gx1_conf_reg_lock, flags);
return val;
}
unsigned gx1_gx_base(void)
{
return (gx1_read_conf_reg(CONFIG_GCR) & 0x03) << 30;
}
int gx1_frame_buffer_size(void)
{
void __iomem *mc_regs;
u32 bank_cfg;
int d;
unsigned dram_size = 0, fb_base;
mc_regs = ioremap(gx1_gx_base() + 0x8400, 0x100);
if (!mc_regs)
return -ENOMEM;
/* Calculate the total size of both DIMM0 and DIMM1. */
bank_cfg = readl(mc_regs + MC_BANK_CFG);
for (d = 0; d < 2; d++) {
if ((bank_cfg & MC_BCFG_DIMM0_PG_SZ_MASK) != MC_BCFG_DIMM0_PG_SZ_NO_DIMM)
dram_size += 0x400000 << ((bank_cfg & MC_BCFG_DIMM0_SZ_MASK) >> 8);
bank_cfg >>= 16; /* look at DIMM1 next */
}
fb_base = (readl(mc_regs + MC_GBASE_ADD) & MC_GADD_GBADD_MASK) << 19;
iounmap(mc_regs);
return dram_size - fb_base;
}
static void gx1_set_mode(struct fb_info *info)
{
struct geodefb_par *par = info->par;
u32 gcfg, tcfg, ocfg, dclk_div, val;
int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
/* Unlock the display controller registers. */
readl(par->dc_regs + DC_UNLOCK);
writel(DC_UNLOCK_CODE, par->dc_regs + DC_UNLOCK);
gcfg = readl(par->dc_regs + DC_GENERAL_CFG);
tcfg = readl(par->dc_regs + DC_TIMING_CFG);
/* Blank the display and disable the timing generator. */
tcfg &= ~(DC_TCFG_BLKE | DC_TCFG_TGEN);
writel(tcfg, par->dc_regs + DC_TIMING_CFG);
/* Wait for pending memory requests before disabling the FIFO load. */
udelay(100);
/* Disable FIFO load and compression. */
gcfg &= ~(DC_GCFG_DFLE | DC_GCFG_CMPE | DC_GCFG_DECE);
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
/* Setup DCLK and its divisor. */
gcfg &= ~DC_GCFG_DCLK_MASK;
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
par->vid_ops->set_dclk(info);
dclk_div = DC_GCFG_DCLK_DIV_1; /* FIXME: may need to divide DCLK by 2 sometimes? */
gcfg |= dclk_div;
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
/* Wait for the clock generatation to settle. This is needed since
* some of the register writes that follow require that clock to be
* present. */
udelay(1000); /* FIXME: seems a little long */
/*
* Setup new mode.
*/
/* Clear all unused feature bits. */
gcfg = DC_GCFG_VRDY | dclk_div;
/* Set FIFO priority (default 6/5) and enable. */
/* FIXME: increase fifo priority for 1280x1024 modes? */
gcfg |= (6 << DC_GCFG_DFHPEL_POS) | (5 << DC_GCFG_DFHPSL_POS) | DC_GCFG_DFLE;
/* FIXME: Set pixel and line double bits if necessary. */
/* Framebuffer start offset. */
writel(0, par->dc_regs + DC_FB_ST_OFFSET);
/* Line delta and line buffer length. */
writel(info->fix.line_length >> 2, par->dc_regs + DC_LINE_DELTA);
writel(((info->var.xres * info->var.bits_per_pixel/8) >> 3) + 2,
par->dc_regs + DC_BUF_SIZE);
/* Output configuration. Enable panel data, set pixel format. */
ocfg = DC_OCFG_PCKE | DC_OCFG_PDEL | DC_OCFG_PDEH;
if (info->var.bits_per_pixel == 8) ocfg |= DC_OCFG_8BPP;
/* Enable timing generator, sync and FP data. */
tcfg = DC_TCFG_FPPE | DC_TCFG_HSYE | DC_TCFG_VSYE | DC_TCFG_BLKE
| DC_TCFG_TGEN;
/* Horizontal and vertical timings. */
hactive = info->var.xres;
hblankstart = hactive;
hsyncstart = hblankstart + info->var.right_margin;
hsyncend = hsyncstart + info->var.hsync_len;
hblankend = hsyncend + info->var.left_margin;
htotal = hblankend;
vactive = info->var.yres;
vblankstart = vactive;
vsyncstart = vblankstart + info->var.lower_margin;
vsyncend = vsyncstart + info->var.vsync_len;
vblankend = vsyncend + info->var.upper_margin;
vtotal = vblankend;
val = (hactive - 1) | ((htotal - 1) << 16);
writel(val, par->dc_regs + DC_H_TIMING_1);
val = (hblankstart - 1) | ((hblankend - 1) << 16);
writel(val, par->dc_regs + DC_H_TIMING_2);
val = (hsyncstart - 1) | ((hsyncend - 1) << 16);
writel(val, par->dc_regs + DC_H_TIMING_3);
writel(val, par->dc_regs + DC_FP_H_TIMING);
val = (vactive - 1) | ((vtotal - 1) << 16);
writel(val, par->dc_regs + DC_V_TIMING_1);
val = (vblankstart - 1) | ((vblankend - 1) << 16);
writel(val, par->dc_regs + DC_V_TIMING_2);
val = (vsyncstart - 1) | ((vsyncend - 1) << 16);
writel(val, par->dc_regs + DC_V_TIMING_3);
val = (vsyncstart - 2) | ((vsyncend - 2) << 16);
writel(val, par->dc_regs + DC_FP_V_TIMING);
/* Write final register values. */
writel(ocfg, par->dc_regs + DC_OUTPUT_CFG);
writel(tcfg, par->dc_regs + DC_TIMING_CFG);
udelay(1000); /* delay after TIMING_CFG. FIXME: perhaps a little long */
writel(gcfg, par->dc_regs + DC_GENERAL_CFG);
par->vid_ops->configure_display(info);
/* Relock display controller registers */
writel(0, par->dc_regs + DC_UNLOCK);
/* FIXME: write line_length and bpp to Graphics Pipeline GP_BLT_STATUS
* register. */
}
static void gx1_set_hw_palette_reg(struct fb_info *info, unsigned regno,
unsigned red, unsigned green, unsigned blue)
{
struct geodefb_par *par = info->par;
int val;
/* Hardware palette is in RGB 6-6-6 format. */
val = (red << 2) & 0x3f000;
val |= (green >> 4) & 0x00fc0;
val |= (blue >> 10) & 0x0003f;
writel(regno, par->dc_regs + DC_PAL_ADDRESS);
writel(val, par->dc_regs + DC_PAL_DATA);
}
struct geode_dc_ops gx1_dc_ops = {
.set_mode = gx1_set_mode,
.set_palette_reg = gx1_set_hw_palette_reg,
};